Reviews & Opinions
Independent and trusted. Read before buy Pioneer DEH-P4550!

Pioneer DEH-P4550

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Pioneer DEH-P4550 Car Audio, size: 1.8 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Pioneer DEH-P4550About Pioneer DEH-P4550
Here you can find all about Pioneer DEH-P4550 like manual and other informations. For example: review.

Pioneer DEH-P4550 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Pioneer DEH-P4550 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Pioneer DEH-P4550 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

! Use only one CR2025 (3 V) lithium battery. ! Remove the battery if the remote control is not used for a month or longer. ! Do not recharge, disassemble, heat or dispose of the battery in fire. ! Do not handle the battery with metallic tools. ! Do not store the battery with metallic materials. ! In the event of battery leakage, wipe the remote control completely clean and install a new battery. ! When disposing of used batteries, please comply with governmental regulations or environmental public institutions rules that apply in your country/area.

CAUTION

Using the remote control
Point the remote control in the direction of the front panel to operate.

Important

! Do not store the remote control in high temperatures or direct sunlight. ! The remote control may not function properly in direct sunlight. ! Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal.
3 Put the front panel into the protective case provided for safe keeping.
Attaching the front panel
Protecting your unit from theft
The front panel can be detached from the head unit and stored in the protective case provided to discourage theft. ! If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone will sound. ! You can turn off the warning tone. See Switching the warning tone on page 31.
Important ! Never use force or grip the display and the buttons tightly when removing or attaching. ! Avoid subjecting the front panel to excessive shocks. ! Keep the front panel out of direct sunlight and high temperatures.
% Replace the front panel by holding it upright to this unit and clipping it securely into the mounting hooks.

Removing the front panel

1 Press OPEN to open the front panel. 2 Grip the left side of the front panel and pull it gently outward. Take care not to grip it tightly or drop it.
HHHHHHHHHHHHHH Whats What
7 EQ-EX button Press and hold to switch between EQ-EX and SFEQ functions. Press to operate each function. 8 FUNCTION button Press to select functions. buttons Press for preset tuning and disc number search when using a multi-CD player. a DISPLAY button Press to select different displays. b EQ button Press to select various equalizer curves. c SOURCE button This unit is turned on by selecting a source. Press to cycle through all of the available sources.

Turning the unit off

% Press SOURCE and hold until the unit turns off.

HHHHHHHHHHHHHH Tuner

Listening to the radio
2 Use VOLUME to adjust the sound level. Rotate to increase or decrease the volume. 3 Press BAND to select a band. Press BAND until the desired band is displayed, F1, F2, F3 for FM or AM. 4 To perform manual tuning, press c or d with quick presses. The frequencies move up or down step by step. 5 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found.
These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page.
Important If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 31).
1 Stereo (5) indicator Shows that the frequency selected is being broadcast in stereo. 2 Preset number indicator Shows what preset has been selected. 3 Frequency indicator Shows to which frequency the tuner is tuned. 4 Signal level indicator Shows the radio wave strength. 5 Band indicator Shows which band the radio is tuned to, AM or FM. 1 Press SOURCE to select the tuner. Press SOURCE until you see TUNER displayed.
# You can cancel seek tuning by pressing either c or d with a quick press. # If you press and hold c or d you can skip broadcasting stations. Seek tuning starts as soon as you release the buttons. Note When the frequency selected is being broadcast in stereo the stereo (5) indicator will light.
Introduction of advanced tuner operation
frequencies for later recall with the touch of a button. % When you find a frequency that you want to store in memory press a preset tuning button 16 and hold until the preset number stops flashing. The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory. The next time you press the same preset tuning button 16 the radio station frequency is recalled from memory.
Notes ! Up to 18 FM stations, 6 for each of the three FM bands, and 6 AM stations can be stored in memory. ! You can also use a and b to recall radio station frequencies assigned to preset tuning buttons 16.
1 LOC indicator Shows when local seek tuning is on. 2 Preset number indicator Shows what preset has been selected. 3 Function display Shows the function status. % Press FUNCTION to display the function names. Press FUNCTION repeatedly to switch between the following functions: BSM (best stations memory)LOCAL (local seek tuning)
# To return to the frequency display, press BAND. Note If you do not operate the function within about 30 seconds, the display is automatically returned to the frequency display.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Press FUNCTION to select LOCAL. Press FUNCTION until LOCAL appears in the display. 2 Press a to turn local seek tuning on. Local seek sensitivity (e.g., LOCAL 2) appears in the display. 3 Press c or d to set the sensitivity. There are four levels of sensitivity for FM and two levels for AM: FM: LOCAL 1LOCAL 2LOCAL 3 LOCAL 4
Storing and recalling broadcast frequencies
If you press any of the preset tuning buttons 16 you can easily store up to six broadcast
AM: LOCAL 1LOCAL 2 The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations. 4 When you want to return to normal seek tuning, press b to turn local seek tuning off. LOCALOFF appears in the display.
Storing the strongest broadcast frequencies
BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 16 and once stored there you can tune in to those frequencies with the touch of a button. 1 Press FUNCTION to select BSM. Press FUNCTION until BSM appears in the display. 2 Press a to turn BSM on. BSM begins to flash. While BSM is flashing the six strongest broadcast frequencies will be stored under preset tuning buttons 16 in order of their signal strength. When finished, BSM stops flashing.
# To cancel the storage process, press b. Note
Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using 16.
HHHHHHHHHHHHHH Built-in CD Player

Playing a CD

4 Use VOLUME to adjust the sound level. Rotate to increase or decrease the volume. 5 To perform fast forward or reverse, press and hold c or d. 6 To skip back or forward to another track, press c or d. Pressing d skips to the start of the next track. Pressing c once skips to the start of the current track. Pressing again will skip to the previous track.

Notes ! The built-in CD player plays one, standard, 12cm or 8-cm (single) CD at a time. Do not use an adapter when playing 8-cm CDs. ! Do not insert anything other than a CD into the CD loading slot. ! If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting the disc again. ! If the built-in CD player does not operate properly, an error message such as ERROR-11 may be displayed. Refer to Understanding built-in CD player error messages on page 34. ! When a CD TEXT disc is inserted, the disc and track titles begin to scroll to the left automatically.
These are the basic steps necessary to play a CD with your built-in CD player. More advanced CD operation is explained starting on the next page. 1 Play time indicator Shows the elapsed playing time of the current track. 2 Track number indicator Shows the track currently playing. 1 Press OPEN to open the front panel. CD loading slot appears.
# After a CD has been inserted, press SOURCE to select the built-in CD player.
2 Insert a CD into the CD loading slot. Playback will automatically start.

CD loading slot

EJECT button
# You can eject a CD by pressing EJECT. # To avoid a malfunction, make sure that no metal object comes into contact with the terminals when the front panel is open.

Close the front panel.

Introduction of advanced built-in CD player operation
2 Press a to turn repeat play on. RPT :ON appears in the display. The track currently playing will play and then repeat. 3 Press b to turn repeat play off. RPT :OFF appears in the display. The track currently playing will continue to play and then play the next track.
1 RPT indicator Shows when repeat play is turned on. 2 Function display Shows the function status. % Press FUNCTION to display the function names. Press FUNCTION repeatedly to switch between the following functions: RPT (repeat play)RDM (random play) SCAN (scan play)PAUSE (pause)
If you perform track search or fast forward/reverse, repeat play is automatically cancelled.
Playing tracks in a random order
Random play lets you play back tracks on the CD in a random order. 1 Press FUNCTION to select RDM. Press FUNCTION until RDM appears in the display. 2 Press a to turn random play on. RDM :ON appears in the display. Tracks will play in a random order. 3 Press b to turn random play off. RDM :OFF appears in the display. Tracks will continue to play in order.
# To return to the playback display, press BAND. Note If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display.

Repeating play

Repeat play lets you hear the same track over again. 1 Press FUNCTION to select RPT. Press FUNCTION until RPT appears in the display.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of each track on the CD. 1 Press FUNCTION to select SCAN. Press FUNCTION until SCAN appears in the display.
2 Press a to turn scan play on. SCAN :ON appears in the display. The first 10 seconds of each track is played. 3 When you find the desired track press b to turn scan play off. SCAN :OFF appears in the display. The track will continue to play.

Entering disc titles

Disc title input lets you input CD titles up to 8 letters long and up to 48 disc titles into the built-in CD player. 1 Play a CD that you want to enter the title. 2 Press FUNCTION and hold until TITLE IN appears in the display.
# If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION. Note After scanning of a CD is finished, normal playback of the tracks will begin again.
# When playing a CD TEXT disc, you cannot switch to TITLE IN. The disc title will have already been recorded on a CD TEXT disc.

Pausing CD playback

Pause lets you temporarily stop playback of the CD. 1 Press FUNCTION to select PAUSE. Press FUNCTION until PAUSE appears in the display. 2 Press a to turn pause on. PAUSE:ON appears in the display. Play of the current track pauses. 3 Press b to turn pause off. PAUSE:OFF appears in the display. Play will resume at the same point that you turned pause on.
3 Press a or b to select a letter of the alphabet. Each press of a will display a letter of the alphabet in A B C. X Y Z, numbers and symbols in 3. > [ ] order. Each press of b will display a letter in the reverse order, such as Z Y X. C B A order.
4 Press d to move the cursor to the next character position. When the letter you want is displayed, press d to move the cursor to the next position and then select the next letter. Press c to move backwards in the display. 5 Move the cursor to the last position by pressing d after entering the title. When you press d one more time, the entered title is stored in memory. 6 Press BAND to return to the playback display.
Using disc title functions

You can input CD titles and display the title. The next time you insert a CD for which you have entered a title, the title of that CD will be displayed.
Notes ! Titles remain in memory, even after the disc has been removed from built-in CD player, and are recalled when the disc is reinserted. ! After data for 48 discs has been stored in memory, data for a new disc will overwrite the oldest one. ! If you connect a multi-CD player, you can input disc titles for up to 100 discs.
Play timeDISC TTL (disc title)ART NAME (disc artist name)TRK TTL (track title) ART NAME (track artist name)
# If specific information has not been recorded on a CD TEXT disc, NO XXXX will be displayed (e.g., NO T-TTL).
Scrolling titles in the display
This unit can display the first 8 letters only of DISC TTL, ART NAME, TRK TTL and ART NAME. When the recorded information is longer than 8 letters, you can scroll the text to the left so that the rest of the title can be seen. % Press DISPLAY and hold until the title begins to scroll to the left. The rest of the title will appear in the display.

Displaying disc titles

You can display the title of any disc that has had a disc title entered. % Press DISPLAY. Press DISPLAY repeatedly to switch between the following settings: Play timeDISC TTL (disc title) When you select DISC TTL, the title of the currently playing disc is shown in the display.
# If no title has been entered for the currently playing disc, NO TITLE is displayed.

Using CD TEXT functions

Some discs have certain information encoded on the disc during manufacture. These discs may contain such information as the CD title, track title, artists name and playback time and are called CD TEXT discs. Only these specially encoded CD TEXT discs support the functions listed below.
Displaying titles on CD TEXT discs
% Press DISPLAY. Press DISPLAY repeatedly to switch between the following settings:
HHHHHHHHHHHHHH Multi-CD Player
4 To perform fast forward or reverse, press and hold c or d. 5 To skip back or forward to another track, press c or d. Pressing d skips to the start of the next track. Pressing c once skips to the start of the current track. Pressing again will skip to the previous track.

Note After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest one.
# If no tracks in the current range are programmed for ITS play then EMPTY is displayed.
4 Press b to turn ITS play off. ITS-P:OFF appears in the display. Playback will continue in normal order from the currently playing track and CD.
Erasing a track from your ITS playlist
When you want to delete a track from your ITS playlist, you can if ITS play is on. If ITS play is already on, skip to step 2. If ITS play is not already on, press FUNCTION. 1 Play a CD you want to delete a track from your ITS playlist, and turn ITS play on. Refer to Playback from your ITS playlist on this page. 2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS. After TITLE IN is displayed, press FUNCTION until ITS appears in the display. 3 Select a desired track by pressing c or d. 4 Press b to erase a track from your ITS playlist. The currently playing selection is erased from your ITS playlist and playback of the next track from your ITS playlist begins.
# If there are no tracks from your playlist in the current range, EMPTY is displayed and normal play resumes.
Playback from your ITS playlist
ITS play lets you listen to the tracks that you have entered into your ITS playlist. When you turn on ITS play, tracks from your ITS playlist in the multi-CD player will begin to play. 1 Select the repeat range. Refer to Repeating play on page 17. 2 Press FUNCTION to select ITS-P. Press FUNCTION until ITS-P appears in the display. 3 Press a to turn ITS play on. ITS-P:ON appears in the display. Playback begins of those tracks from your playlist within the previously selected MCD or DSC ranges.
5 Press BAND to return to the playback display.
Erasing a CD from your ITS playlist
When you want to delete all tracks of a CD from your ITS playlist, you can if ITS play is off. 1 Play a CD that you want to delete. Press a or b to select a CD. 2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS. After TITLE IN is displayed, press FUNCTION until ITS appears in the display. 3 Press b to erase all tracks on the currently playing CD from your ITS playlist. All tracks on the currently playing CD are erased from your playlist and ITS CLR is displayed. 4 Press BAND to return to the playback display.
TITLE IN (disc title input)ITS (ITS programming)
# When playing a CD TEXT disc on a CD TEXT compatible multi-CD player, you cannot switch to TITLE IN. The disc title will have already been recorded on a CD TEXT disc.

# To switch to EQ-EX function, press EQ-EX and hold.
HPF function on after selecting the SFEQ setting, you can combine HPF function with SFEQ function.

Using balance adjustment

You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Press AUDIO to select FAD. Press AUDIO until FAD appears in the display.
# If the balance setting has been previously adjusted, BAL will be displayed.
2 Press EQ-EX to select the desired SFEQ setting. Press EQ-EX repeatedly to switch between the following settings: FRT1-H (front 1-high)FRT1-L (front 1-low) FRT2-H (front 2-high)FRT2-L (front 2-low) CUSTOM (custom)SFEQ OFF (off) 3 Press c or d to select the desired position. Press c or d until the desired position appears in the display. L (left)C (center)R (right)
Notes ! If you adjust the bass or treble, CUSTOM memorizes an SFEQ setting in which the bass and treble are adjusted for personal preference. ! If you switch the SFEQ setting, the HPF function is automatically turned off. By turning the
# FAD : 0 is the proper setting when only two speakers are used. # When the rear output setting is R-SP :S/W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 31.
2 Press a or b to adjust front/rear speaker balance. Each press of a or b moves the front/rear speaker balance towards the front or the rear. FAD :F15 FAD :R15 is displayed as the front/ rear speaker balance moves from front to rear.
3 Press c or d to adjust left/right speaker balance. When you press c or d, BAL : 0 is displayed. Each press of c or d moves the left/right speaker balance towards the left or the right. BAL : L9 BAL : R9 is displayed as the left/ right speaker balance moves from left to right.

Using the equalizer

The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.
Adjusting equalizer curves
You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM. 1 Press AUDIO to select the equalizer curve adjustment. Press AUDIO until EQ-L appears in the display.
Recalling equalizer curves
There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:
Display SPR-BASS POWERFUL NATURAL VOCAL CUSTOM EQ FLAT Equalizer curve Super bass Powerful Natural Vocal Custom Flat
# If the equalizer band has been previously adjusted, the band of that previously selected will be displayed instead of EQ-L.
2 Press c or d to select the equalizer band to adjust. Each press of c or d selects equalizer bands in the following order: EQ-L (low)EQ-M (mid)EQ-H (high) 3 Press a or b to adjust the level of the equalizer band. Each press of a or b increases or decreases the level of the equalization band. +is displayed as the level is increased or decreased.

1 Press AUDIO and hold until frequency and the Q factor (e.g., F- 80:Q1W) appears in the display. 2 Press AUDIO to select B. Press AUDIO until B appears in the display. 3 Press c or d to select the desired frequency. Press c or d until the desired frequency appears in the display. 4063100160 (Hz)
3 Press c or d to select a desired level. Each press of c or d selects level in the following order: LOW (low)MID (mid)HI (high) 4 Press b to turn loudness off. LOUD :OFF appears in the display.

Using subwoofer output

This unit is equipped with a subwoofer output which can be turned on or off. 1 Press AUDIO to select SUB, W. When the subwoofer controller setting is P/O :FUL, you cannot select SUB, W. Press AUDIO until SUB, W appears in the display. 2 Press a to turn subwoofer output on. SUB, W:NOR appears in the display. Subwoofer output is now on.
Selecting treble frequency
You can select the treble frequency for level adjustment. 1 Press AUDIO and hold until frequency and the Q factor (e.g., F- 80:Q1W) appears in the display. 2 Press AUDIO to select T. Press AUDIO until T appears in the display. 3 Press c or d to select the desired frequency. Press c or d until the desired frequency appears in the display. 2k4k6k10k (Hz)
# If the subwoofer output phase has been set to the reverse, SUB, W:REV will be displayed. # To turn subwoofer output off, press b.
3 Press c or d to select the phase of subwoofer output. Press c to select reverse phase and REV appears in the display. Press d to select normal phase and NOR appears in the display.

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Press AUDIO to select LOUD. Press AUDIO until LOUD appears in the display. 2 Press a to turn loudness on. Loudness level (e.g., LOUD :MID) appears in the display.
Adjusting subwoofer settings
When the subwoofer output is on, you can adjust the cut-off frequency and the output level of the subwoofer. 1 Press AUDIO to select 80: 0. When the subwoofer output is on, you can select 80: 0. Press AUDIO until 80 appears in the display.
# If the subwoofer setting has been previously adjusted, the frequency of that previously selected will be displayed instead of 80.
2 Press c or d to select cut-off frequency. Press c and 50 (Hz) is displayed. Press d and 125 (Hz) is displayed. Only frequencies lower than those in the selected range are output from the subwoofer. 3 Press a or b to adjust the output level of the subwoofer. Each press of a or b increases or decreases the level of the subwoofer (e.g., +6 to 6). Press a or b until you see the desired value displayed.
1 Press AUDIO to select non fading output setting. Press AUDIO until NOFAD: 0 appears in the display. 2 Press a or b to adjust the output level of the non fading. Each press of a or b increases or decreases the level of the non fading (e.g., +6 to 6). Press a or b until you see the desired value displayed.

Notes ! Since the FM tuner volume is the control, it is not possible to apply source level adjustments to the FM tuner. ! The AM tuner volume level can also be adjusted with source level adjustments. ! The built-in CD player and the multi-CD player are set to the same source level adjustment volume automatically. ! External unit 1 and external unit 2 are set to the same source level adjustment volume automatically.
HHHHHHHHHHHHHH Initial Settings
Adjusting initial settings
2 Press c or d to select the segment of the clock display you wish to set. Pressing c or d will select one segment of the clock display: HourMinute As you select segments of the clock display the segment selected will blink.
Initial settings lets you perform initial set up of different settings for this unit. 1 Function display Shows the function status. 1 Press SOURCE and hold until the unit turns off. 2 Press FUNCTION and hold until the clock appears in the display. 3 Press FUNCTION to select one of the initial settings. Press FUNCTION repeatedly to switch between the following settings: ClockFM (FM tuning step)AM (AM tuning step)WARN (warning tone)AUX (auxiliary input)DIMMR (dimmer)R-SP (rear output and subwoofer controller)TEL (telephone) Use the following instructions to operate each particular setting.
# To cancel initial settings, press BAND. # You can also cancel initial settings by holding down FUNCTION until the unit turns off.
3 Press a or b to set the clock. Pressing a will increase the selected hour or minute. Pressing b will decrease the selected hour or minute.
Setting the FM tuning step
The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz. 1 Press FUNCTION to select FM. Press FUNCTION repeatedly until FM appears in the display. 2 Press c or d to select the FM tuning step. Pressing c or d will switch the FM tuning step between 100 kHz and 50 kHz. The selected FM tuning step will appear in the display.
Note If seek tuning is performed in 50 kHz steps, stations may be tuned in imprecisely. Tune in the stations with manual tuning or use seek tuning again.

Setting the clock

Use these instructions to set the clock. 1 Press FUNCTION to select clock. Press FUNCTION repeatedly until clock appears in the display.
Setting the AM tuning step
The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 1,602 kHz allowable) to 10 kHz (530 1,640 kHz allowable). 1 Press FUNCTION to select AM. Press FUNCTION repeatedly until AM appears in the display. 2 Press c or d to select the AM tuning step. Pressing c or d will switch the AM tuning step between 9 kHz and 10 kHz. The selected AM tuning step will appear in the display.

1 Press FUNCTION to select AUX. Press FUNCTION repeatedly until AUX appears in the display. 2 Press a or b to turn AUX on or off. Pressing a or b will turn AUX on or off and that status will be displayed (e.g., AUX :ON).
Switching the dimmer setting
To prevent the display from being too bright at night, the display is automatically dimmed when the cars headlights are turned on. You can switch dimmer on or off. 1 Press FUNCTION to select DIMMR. Press FUNCTION repeatedly until DIMMR appears in the display. 2 Press a or b to turn DIMMR on or off. Pressing a or b will turn DIMMR on or off and that status will be displayed (e.g., DIMMR :ON).
Switching the warning tone
If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone. 1 Press FUNCTION to select WARN. Press FUNCTION repeatedly until WARN appears in the display. 2 Press a or b to turn WARN on or off. Pressing a or b will turn WARN on or off and that status will be displayed (e.g., WARN :ON).
Setting the rear output and subwoofer controller
This units rear output (rear speaker leads output) can be used for full-range speaker (R-SP :FUL) or subwoofer (R-SP :S/W) connection. If you switch the rear output setting to the R-SP :S/W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp.
Switching the auxiliary setting
It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit.
Initially, the unit is set for rear full-range speaker connection (R-SP :FUL). When rear output are connected to full range speakers (when R-SP :FUL is selected), you can connect the RCA subwoofer output to a subwoofer. In this case, you can select whether to use the subwoofer controllers (low pass filter, phase) built-in P/O :S/W or the auxiliary P/O :FUL. 1 Press FUNCTION to select R-SP. Press FUNCTION repeatedly until R-SP appears in the display. 2 Press a or b to switch the rear output setting. Pressing a or b will switch between R-SP :FUL (full-range speaker) and R-SP :S/W (subwoofer) and that status will be displayed.
Switching the telephone muting/attenuation
Sound from this system is muted or attenuated automatically when a call is made or received using a cellular telephone connected to this unit. ! The sound is turned off, MUTE or ATT is displayed and no audio adjustment is possible. ! Operation returns to normal when the phone connection is ended. 1 Press FUNCTION to select TEL. Press FUNCTION repeatedly until TEL appears in the display. 2 Press c or d to switch the telephone muting/attenuation. Pressing c or d will switch between TEL :ATT (attenuation) and TEL :MUT (muting) and that status will be displayed.

# If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switching the auxiliary setting on page 31.

Setting the AUX title

The title displayed for the AUX source can be changed.

Appendix

HHHHHHHHHHHHHH Additional Information
Understanding built-in CD player error messages
When problems occur during CD play an error message may appear on the display. If an error message appears on the display refer to the table below to see what the problem is and the suggested method of correcting the problem. If the error cannot be corrected, contact your dealer or your nearest Pioneer Service Center.
Message Cause Action Clean disc. Replace disc. Turn the ignition ON and OFF, or switch to a different source, then back to the CD player. Replace disc. Turn off the CD player until the CD player cools down.
! Use only normal, round CDs. If you insert irregular, non-round, shaped CDs they may jam in the CD player or not play properly.
ERROR-11, 12, Dirty disc 17, 30 ERROR-11, 12, Scratched disc 17, 30 ERROR-10, 11, Electrical or me12, 17, 30, A0 chanical
! Check all CDs for cracks, scratches or warped discs before playing. CDs that have cracks, scratches or are warped may not play properly. Do not use such discs. ! Avoid touching the recorded (non-printed side) surface when handling the disc. ! Store discs in their cases when not in use. ! Keep discs out of direct sunlight and do not expose the discs to high temperatures. ! Do not attach labels, write on or apply chemicals to the surface of the discs. ! To clean dirt from a CD, wipe the disc with a soft cloth outward from the center of the disc.

ERROR-44 HEAT

All tracks are skip tracks CD player overheated

CD player and care

! Use only CDs that have either of the two Compact Disc Digital Audio marks as shown below.
! If the heater is used in cold weather, moisture may form on components inside the CD player. Condensation may cause the CD player to not operate properly. If you think that condensation is a problem turn off the CD player for an hour or so to allow the CD player to dry out and wipe any damp discs with a soft cloth to remove the moisture. ! Road shocks may interrupt CD playback.

CD-R/CD-RW discs

Printed in Thailand

<KMMZX/02J00000>

<CRD3701-B/N> ES

 

Tags

FMJ A32 Sdio-SPI Eternity KDL-46V5500 KDL-46HX705 1-1973 LN500E DB155 CTK-651 Svga 238 GC2020BII ML 9000 Seiko 7002 ML-1615 PX-B500 Nokia 6235 37LC3R YP-F2J Monitor CW G-5000 Temporis 05 Yamaha RX-5 CXT70 System NC8430 OFX 525 Compact KX-TG2257 KX-TG9120FX ID9370B System-2004 XNV-770BT 350-2006 FHD-3 P5100 XXV-05V Underdark Aspire 5335 GO 6430 Airpcap NX SY-MK7 Plugin MZ-N1 Review USG 200 2410 AIO FS-Y1 HT-TZ315R WD-90155FB DSC-H55 Antenna 72 46WM48 TA890GXB HD Biberons Ivdm-7002 LA40A550p1R MS1415 1000 BE LN37C530 HX2110 P50542 Select MB-S1 CE2713 ESF66030 RQ-970BX SD-FX10 Mypal A632 SA-HT730 ZI9454X GR-FXM39 NX8220 DP230 NV-HD660B Sagem D85C BH-105 XD206U 600SC NPS-520 Theater2 L1900R-WF CT-5621T NV-H200G Psr-630 Vodafone Dmcg2KEB NAS 440 Faxphone B550 PD-T307 X1900 Temporis Mini 2693HM DSR205 VGN-TX5xn-B Alarm SE7451B-37 Enhwi-G3 HL-4040CN DGS-3650 NAD L53 CX 6T

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101