W M A / M P3

P l a y e r s

Head to a Higher Class

The powerful control, elegant simplicity and brilliant design you crave in your car come to a head. Now, Pioneers head unit lineup includes a full-color OEL display with an eye-popping spectrum of colors, as well as Pure Blue OEL displays for a cool entertaining touch. The latest advances in Digital Signal Processing (DSP) modify sound output to match car cabin acoustics with unerring precision. The Rotary Commander makes every command easy, at the touch of a finger.
Advanced DSP (Digital Signal Processor)

DEH-P8850MP DEH-P80RS

With many of the most technologically advanced digital signal processing system refinements built in, Pioneers DEH-P8850MP and DEH-P80RS head units achieve the ultimate in-car sound quality, setup, and control, featuring: Digital 16-band graphic equalizer for the extra-precise adjustment of sound quality and balance that you need to customize sound exactly as you like. Auto EQ monitoring cabin characteristics for precise sound correction and acoustic balance. Emperor Volume control for more gradual, consistent volume shifts. Burr Brown advanced segment-type DAC (Digital-to-Analog Converter)
offering 24-bit resolution for outstanding dynamic performance. (DEH-P80RS only) Burr Brown 1-bit DAC offering 24-bit resolution throughout a wide dynamic range and excellent signal-to-noise ratio for purer fidelity. (DEH-P8850MP only) Advanced Auto Time Alignment for more convenient sound field customization. (DEH-P80RS only) 3-Way Network Mode/Standard Mode* plus internal amplifier-off mode** for easy connection, control and activation of additional amplifiers.
**DEH-P80RS and FH-P9200MP only **DEH-P80RS only
Single-CD Player 2-DIN Players

Auto Time Alignment

DEH-P8850MP DEH-P80RS FH-P920 0MP
The Five Phases of Auto Time Alignment Phase 1: Checks number of speakers, and measures each speakers basic capability. Phase 2: Measures time it takes for the sound from each speaker to reach listening position and calibrates phasing accordingly. Phase 3: Temporarily adjusts each speakers frequency response and sound pressure level characteristics. Phase 4: Adjusts each speakers sound pressure level equally. Phase 5: Exclusive parametric equalizer fine-tunes each speakers sound characteristics.

Response (dB)

Pioneers innovative Auto Time Alignment automatically shifts the soundstage in front of listeners, and brings out vocals in the process. First, a microphone at the listening point measures the time that the sound from each speaker takes to reach the listener (rather than listenerto-speaker distance), accurately accounting for sound reflection and absorption. Then, output timing is automatically adjusted for more expansive effect.

Auto EQ Adjustment Example
After adjustment Response (dB)
Microphone for Auto EQ frequency band fine-tuning Before adjustment 20 Frequency (Hz) 20 k
For smoother low- to high-range sound.
Full-Color OEL (Organic EL) Display
Choose among four types of gauges to view battery voltage, tachometer and sound level information.
Pioneering the First Receiver with 65,536-Color OEL Display Pioneer presents the DEH-P8850MP with full-color (65,536-color*) OEL display capable of displaying motion and 3D animated graphics in multiple colors. Featuring OEL technology that is arguably the greatest advance in car entertainment displays since the detachable face was introduced, this innovation complements Pioneers renowned audio quality with a dash of uniquely brilliant visual impact.
*Up to 256 colors can be displayed simultaneously in animated images.
Theres no need to glance at the display to confirm system status. The DEH-P8850MPs AUI can emit a distinctive sound for each of these functions: ON, Function, and Select. This makes it easy to know what the system is doing while you safely keep your eyes on the road.

Analog

Graphic

Digital 1

Digital 2
Customizable Displays Now, Pioneer makes it easy to personalize the graphics on your OEL display. From a Pioneer website, download the software that you need to create and edit BMP, JPEG or PNG images. You can add animation, special effects, titles and more. Once the data is complete, burn it onto a CD-R. Then, insert the disc into a DEH-P8850MP head unit to upload the customized images and put them on view.

Other Images

Personalizing animation for your head unit is easy. Download exclusive PC-Link software from the website* for PC-Link users, then collect your favorite digital camera images (BMP, JPEG or PNG formats) or digital video clips (AVI format) on your computer. Use the software to edit the images and movies; add special effects and text; and adjust frame size, timing and sequence. Save your new design on a CD-R. Then load the disc into the DEH-P8850MP head unit, and the files upload automatically.
*DEH-P8850MP: http://www.pioneer.co.jp/car/pclink4/index-e.html Available from late April 2006. Ask your nearest dealer about details.

Rotary volume Direct Sub Drive 1 RCA preout: selectable (rear/subwoofer)

DEH-2850MP

Play the latest digital audio formatsEasy Equalizer shapes the sound of your journey with the greatest of ease.

CD-IB100 II

iPod Adapter
Play as long as you like. Pioneers iPod adapter CD-IB100 II makes it easy to access any of up to 15,000 tracks* stored in various digital compression formats on an iPod portable music player connected to Pioneers latest head units**.
*iPod capacity depends on iPod model and compression format. **DEH-P8850MP/DEH-P6850MP/DEH-P5850MPH/DEH-P4850MPH/DEH-P80RS/DEX-P90RS/FH-P9200MP/FH-P5000MP/ FH-P4200MP/KEH-P4025/KEH-P2035 NOTES: iPod is for legal or rightholder-authorized copying only. Dont steal music. iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Depending on the Pioneer head unit installed, some functions may be limited using iPod adapter.
DEH-P6850MP DEH-P4850MPH DEH-3850MPH

SUPERTUNER IIID CD TEXT

1 RCA DIN-D

Gain [dB]

a choice between 0- to 12-dB level Bass Boost Bass Boost offers be adjusted in 2-dB steps, letting you settings that can set the optimal bass level for each speaker and subwoofer connected to a system, according to preference and music style. The result is more precise control over the balance of sounds to enhance the overall impact of the music you listen to.

Bass Boost (fc = 100 Hz)

WAV file playback BMX (Bitmetric Equalizer) EEQ 5-mode preset equalizer 1-mode custom preset equalizer 2-mode selectable loudness 1 RCA preout (rear)

S i n g l e - C D

P l a y e r

10.0 100.0 1000.0

Frequency [Hz]

DEH-1850

10000.0 100000.0
4 - Channel High-Power CD Receiver
A well-crafted head unit delivers a solid introduction to the world of Pioneer CD play and performance.

Direct Sub Drive

DEH-P6850MP DEH-P5850MPH DEH-P4850MPH DEH-3850MPH
Combine the MOSFET 50 W 4 power amp and EEQ technology to get Direct Sub Drive, another unique Pioneer technology. It enables you to amplify your front speakers by 50 W 2 and add a 70 W amplified
filtered subwoofer (in 2 ohm mode) in the rear to enjoy outstanding full-power bass without an extra amplifier. Its an easy solution for lovers of booming bass.

Create and memorize your favorite equalization curves from an amazing variety of sound-shaping dimensions and combinations, just as you like. Custom-1 mode can memorize adjusted preset curves using 7-band* digital equalizer settings for each source (Source EQ memory). Custom-2 mode can register your favorite custom curve (based on Flat mode** curve) for all sources using the 7-band* digital equalizer.
**L/R common 16-band for DEH-P8850MP and L/R independent 16-band for DEH-P80RS. **Flat mode also remains after customizing equalization curve.
Select among three levels (high/mid/low) to instantly boost volume when driving noise overpowers in-car sound.
2-Mode Selectable Loudness
DEH-2850MP DEH-1850 KEH-P2035
1-Mode Custom Preset Equalizer
DEH-P5850MPH KEH-PDEH-P4850MPH DEH-3850MPH DEH-2850MP DEH-1850
Select high or low volume boost level when extraneous noise drowns out your sound system.
Selectable FIE (Front Image Enhancer)
DEH-P4850MPH DEH-3850MPH KEH-P4025
Pioneers head units feature a 1-mode custom preset equalizer for creating your favorite sound curve from an amazing variety of sound-shaping
Enhance front sound imaging without sacrificing rear speaker bass. You can choose among three effect settings.

P u r e

Co m p o n e n t

Sy s t e m s

WMA/MP3 Players WMA/MP3 Players
Making Digital Sound More Natural
Optical Digital Reference (ODR) and Pure Component systems add refinement to linear power handling throughout the entire signal processing and transfer process, from the original source, to a cars CD player/receiver, and out through the speakers. The result: more natural integrity in pure digital sound quality. Pioneers exclusive ODR components are connected by an optical digital link, ensuring precise, consistent signal processing.

TS-W01RS

25 -cm (10" ) Component Subwoofer

TS-M01RS

17-cm Component Mid-Bass Speaker
Single-CD Player Single-CD Player
120 W MAX. 17-cm cone mid-bass speaker Corrugation surround Copper ribbon short voice coil with neodymium magnet Bottom hold design zinc die-cast one-piece chassis Tungsten damper holder* with anti-resonance structure Gold-plated large screw-type terminals Use with UD-N01RS 2-Way Passive Crossover Network 50 watts nominal power handling 3511,000 Hz, mm

7.7-cm cellulose cone midrange speaker DLC (Diamond Like Carbon) coated titanium dust cap Zinc die-cast back basket Glass cloth voice coil bobbin Heat-resistant ribbon voice coil with neodymium magnet Gold-plated large screw-type terminals 15 watts nominal power handling 70 Hz24,000 Hz (With speaker unit only.)/160 Hz24,000 Hz (With back chamber.), 90 42.5 mm (With speaker unit only.)/mm (With back chamber.)

UD-N01RS

2-Way Passive Crossover Network
Power Amplifiers Power Amplifiers
Use with TS-M01RS and TS-T01RS

Large 140-mm Voice Coil

High-Quality Mid-Bass Pulp Cone

Subwoofers Subwoofers

600 W MAX.
The TS-W01RSs magnetic circuit structure uses a voice coil with large 140-mm diameter to drive the center part of the entire speaker cone to improve transient. Multiple neodymium magnets creating powerful magnetic flux help drive the cone with exceptional strength and accuracy. The large vent in the center of the speaker back is maximized for fine control to reduce air resistance. The result: more accurate bass reproduction. Compact Enclosure We design our subwoofer cones for compact (1428 liters) speaker enclosures.

Digital Power Amplifier

We carefully choose the pulp fiber mix of our speaker cone material to ensure the proper characteristics for optimal quality and linear reproduction of sound throughout a wide frequency range. Dust cap uses high-inner-loss-type pulp exclusively developed for superior smooth frequency response. Dust cap has a concave shape, and suppresses resonance inside the magnetic circuits. Its corrugation surround effectively absorbs unwanted vibration, achieves excellent linearity and reduces interference of cone and surround.

Speakers Speakers

Shallow mounting aluminum die-cast basket and large 140-mm voice coil

Corrugation surround

Dual Arc Ring Tweeter Diaphragm*
50 W 4 (4 )/75 W 4 (2 )/150 W 2 (4 ) (continuous power) 100 W 4 (4 )/300 W 2 (4 ) (max. power) Bridgeable 2/3/4-channel capability Current feedback amplifier Full balanced system (bridgeable connection) Multi 24-bit Burr Brown D/A converters 2 optical digital inputs
Specifications & Comparison Specifications & Comparison
IP-Bus input/output Gold-plated screw-type speaker terminals Gold-plated large screw-type power/ground terminals Low load impedance capability (28 ohm) Copper-plated chassis L/R independent power supply Sound master clock DAC volume

Large block-type power/ground terminals (0-gauge) Variable Bass Boost Remote (40120 Hz, 0 to +12 dB) Subsonic filter (20 Hz, 18 dB/oct.) SYNC control PWM regulated power supply with MOSFET switching High-performance balanced isolator circuit High-efficiency MOSFET output section MASS (Multiple Amplifier Synchronization System)
Large screw-type speaker terminals Variable Bass Boost Remote (40120 Hz, 0 to +12 dB) Subsonic filter (20 Hz, 18 dB/oct.) SYNC control PWM regulated power supply with MOSFET switching High-performance balanced isolator circuit High-efficiency MOSFET output section MASS (Multiple Amplifier Synchronization System)
Multi-CD Players Multi-CD Players Cassette Players Cassette Players

TS-W12PRS

30-cm (12") Component PRS Subwoofer

TS-M171PRS

17-cm Component PRS Mid-Bass Speaker

TS-S101PRS

10-cm Component PRS Midrange Speaker

TS-T031PRS

MASS (Multiple Amplifier Synchronization System) Connection Examples
PRS-D0SPL PRS-D3000SPL PRS-D1000M
28-mm Component PRS Soft-Dome Tweeter
Single-Amplifier Configuration*: 1,500 W RMS

SYNC OUTPUT

Mode select switch must be in MASTER position.
With the PRS-D5000SPL, PRS-D3000SPL and PRS-D1000Ms SYNC connection, adjustment of the master amplifier also adjusts all other amplifiers in the cascade. This makes control simpler and more convenient.
* These are only a few examples of connection configurations for the PRS-D5000SPL. Ask your nearest car stereo installer or dealer about power/ground wiring and installation details for the PRS-D5000SPL, PRS-D3000SPL and PRS-D1000M.

L R SYNC INPUT

2 minimum 1,500 W

1200 W MAX. 60 W MAX.

Two-Amplifier Configuration*: 3,000 W RMS

Signal source

30-cm (12") enclosure use subwoofer KEVLAR Brand Fiber/pulp composite cone with integrated VCCS (Voice Coil Cooling System) Dual-layer rolled urethane surround Dual Voice Coil (DVC) design () 4-spoke aluminum die-cast basket Gold-plated binding posts Small enclosure capability Spoke grille compatible (UD-G306) 300 watts nominal power handling 152,000 Hz, 92 dB, 1.0 l (28.3 cu. ft.), mm
Signal source 2 minimum 1,500 W 2 minimum 1,500 W

200 W MAX.

3-layer aramid fiber with IMPP composite cone Heat-resistant ribbon voice coil High density micro fiber surround for smoother response Aluminum die-cast basket Gold-plated screw-type terminals Spoke grille included 50 watts nominal power handling 259,000 Hz, 88 dB, mm
Dual layer cone with aramid and pulp High density micro fiber surround for smoother response Heat-resistant ribbon voice coil with neodymium magnet Glass cloth voice coil bobbin Aluminum die-cast basket Gold-plated screw-type terminals Spoke grille included (removable magnet cover for flexible mounting) 15 watts nominal power handling 6030,000 Hz, 86 dB, mm

GM-5200T

GM-3200T
760 W MAX. LPF RCA INPUT SPEAKER INPUT 300 W MAX. LPF RCA INPUT SPEAKER INPUT
125 W 2 (4 )/380 W 1 (4 )/ 190 W 2 (2 ) (continuous power) 250 W 2 (4 )/760 W 1 (4 ) (max. power) Bridgeable 1/2/3-channel capability LPF (80 Hz, 12 dB/oct.) High-voltage input level control (400 mV6.5 V) Input level/gain control Low load impedance capability (28 ohm) RCA input terminals Screw-type speaker terminals Large screw-type power/ground terminals Speaker level input (1.6 V26 V) Bass Boost (50 Hz, 0/+6/+12 dB) PWM regulated power supply with MOSFET switching High-performance balanced isolator circuit Black heatsink
60 W 2 (4 )/150 W 1 (4 )/ 75 W 2 (2 ) (continuous power) 120 W 2 (4 )/300 W 1 (4 ) (max. power) Bridgeable 1/2/3-channel capability LPF (80 Hz, 12 dB/oct.) High-voltage input level control (400 mV6.5 V) Input level/gain control Low load impedance capability (28 ohm)

2 parallel

RCA input terminals Screw-type speaker terminals Large screw-type power/ground terminals Speaker level input (1.6 V26 V) High-performance balanced isolator circuit Black heatsink
2-Channel Amplifier Connection Examples

Bridged Mono

Bridged mono Subwoofer TS-W306C

8 series

Stereo

Bridged Mono 4

Bridged mono
Stereo Subwoofer GM-5200T 2 TS-W3004SPL GM-5200T TS-W3004SPL 4
4-Channel Amplifier Connection Examples

Bridged Stereo

TS-W306C Bridged connection L R Stereo GM-6200F L R Subwoofer GM-6200F Bridged connection TS-W306C Bridged connection

3-Channel Mode Bridged

Full-range speakers

Multi-Channel System

2-preout head unit Front A-ch. Rear B-ch. Nonfading RCA input RCA output GM-6200F Bridged connection GM-5200T
6" 9" speakers LPF TS-W306C

TS-W306C

GM-D510M GM-7200M

Mono Amplifier

800 W MAX. RCA INPUT LPF SPEAKER INPUT

GM-6200F

LPF SPEAKER INPUT HPF 1000 W MAX. LPF RCA INPUT

*Output for A-channel

Current (A)
250 W 1 (4 )/360 W 1 (2 ) (continuous power) 500 W 1 (4 )/800 W 1 (2 ) (max. power) Variable LPF (40240 Hz, 12 dB/oct.) High-voltage input level control (400 mV6.5 V) Input level/gain control Low load impedance capability (28 ohm) RCA input terminals Screw-type speaker terminals Large screw-type power/ground terminals Speaker level input (1.6 V26 V) Bass Boost (50 Hz, 0/+6/+12 dB) PWM regulated power supply with MOSFET switching High-performance balanced isolator circuit Black heatsink

wire which effectively doubles a subwoofers capacity to handle input power and helps prevent short-circuiting caused by overheating. When pushed toward the limit, the new Adhesive layer TS-W5102SPLcontaining ceramic-coated Ceramic thermal insulation voice coil coolly pumped out earth-shaking Electrical insulation decibel levels without fail to outperform the Copper wire competition at dB Drag Racing showcases in 2005 and 2006. Extra-Strong Dust Cap with Foamed Acrylic Polymer The TS-W8102SPL and TS-W5102SPL subwoofers dust caps are far stronger than and practically as light as conventional ones, thanks to foamed acrylic polymer sandwiched between layers of carbon-fiber and glass cloth. This foamed acrylic polymer core is extremely durable and heat-resistant, with up to about 36 times as much compressive strength as carbon-fiber blended paper, among more conventional foam materials. Pioneer puts this material to maximum advantage in this subwoofer to accommodate higher sound pressure levels for greater stability and power in bass reproduction.
Carbon cloth Foamed acrylic polymer

m 10 m

The TS-W8102SPL, TS-W5102SPL, TS-W3004SPL and TS-W2504SPL incorporate a patent-pending Woven Aramid Fiber Radial Surround which improves power handling and reduces distortion. Similar to a radial tire, the surround is constructed of three layerstwo consisting of rubber and one of interwoven aramid fiber. The aramid fiber layer is designed Benefits of Woven Aramid Fiber Radial Surround
Improved power handling capability Reduced distortion (anti-puckering design) Improved linear excursion Louder, more accurate bass
with a honeycomb weave, which evenly distributes strength throughout the surround material, eliminating any weak points of surround and improving high-power capability. The result is an extremely durable and resilient surround that resists puckering (distortion often produced under extreme power conditions).
The three layers are formed under a high-pressure, high-temperature process. The result: an extremely durable and high-performance surround.

150 W MAX.*

*Output Power
cm Sealed Active Subwoofer
Built-in MOSFET 150 W max. monaural amplifier cm aluminum and IMPP composite cone woofer with strontium magnet Wired remote control (input level, crossover frequency, phase) Speaker and RCA level inputs Built-in variable LPF (50125 Hz, 12 dB/oct.) Aluminum die-cast heatsink 50 watts nominal power handling 54200 Hz, 101 dB/1 W (In-car), 200 mm

TS-W251R

600 W MAX. Blue IMPP composite cone 4-layer, long voice coil Single nomex damper Extended excursion design Extended and vented pole yoke Best tuned parameters Spoke grille compatible (UD-G256) 120 watts nominal power handling 204,500 Hz, 90 dB, 19.836.8 l (0.71.3 cu. ft.), mm

TS-WX22A

20 -cm Sealed Active Subwoofer
Built-in MOSFET 150 W max. monaural amplifier 20-cm IMPP composite cone woofer with strontium magnet Wired remote control (input level, crossover frequency, phase) Speaker and RCA level inputs Built-in variable LPF (50125 Hz, 12 dB/oct.) Aluminum die-cast heatsink 60 watts nominal power handling 40200 Hz, 101 dB (In-car), 110 mm

Rear terminals

Free-Air Type Subwoofers
Free-Air Type (F-type) subwoofers reproduce rich bass and high Sound Pressure Level (SPL) using the entire trunk space as an enclosure.

Free-Air Type (F-type)

Can be installed at rear luggage room, under seat, etc.

TS-WX206A

20 -cm Bandpass Active Subwoofer

TS-W305F

30-cm (12") Component Subwoofer (Free-Air Type)
Large magnet and high-power motor assembly Tall surround and large cone surface Composite IMPP cone using interlaced aramid fiber Extended excursion design Long voice coil design
Extended and vented pole yoke Best tuned parameters Spoke grille compatible (UD-G306) 300 watts nominal power handling 202,000 Hz, 94 dB, 150 l (5.3 cu. ft.), mm
Built-in MOSFET 150 W max. monaural amplifier 20-cm IMPP composite cone woofer with strontium magnet Large dual port bandpass design for rich and powerful bass Speaker and RCA level inputs Input level control/phase switch Built-in variable LPF (50125 Hz, 12 dB/oct.) Aluminum die-cast heatsink 60 watts nominal power handling 35200 Hz, 107 dB (In-car), 412 mm
Sound quality adjustment knobs

TS-W255F

650 W MAX.
25-cm (10") Component Subwoofer (Free-Air Type)
Extended and vented pole yoke Best tuned parameters Spoke grille compatible (UD-G256) 250 watts nominal power handling 202,500 Hz, 92 dB, 150 l (5.3 cu. ft.), mm

TS-WX20LPA

200 W MAX.*
TS-W305F Back TS-W305F Subwoofer with optional UD-G306 Spoke Grille *Output Power
20 -cm Bass-Reflex Active Subwoofer

UD-G306/UD-G256

Common Features 6" 9" (cm) woofer/57-mm cone midrange/18-mm dome tweeter Composite IMPP cone woofer using interlaced aramid fiber
PET cone midrange with magnetic fluid Shallow-depth basket for increased installation versatility 40 watts nominal power handling 2828,000 Hz, 93 dB, 105 mm

TS-A2511

400 W MAX.

TS-A2011 TS-A2511

TS-G Series Speakers

25 -cm 3-Way Speaker

25-cm woofer/66-mm cone midrange/18-mm dome tweeter 100 watts nominal power handling 2530,000 Hz, 93 dB, mm
Designed to deliver exceptional value, TS-G speakers combine superior power handling with cone design that is both attractive and tuned for performance. The great sound of these speakers is worthy of their innovative IMPP cone technology. Designed for shallow mounting, these universal speakers can suit most installation situations.

TS-A2011

Glass-imide voice coil bobbin for higher power handling capabilities PET film cone midrange with magnetic fluid PET film dome tweeter 350 W MAX.

TS-G1641R

160 W MAX.

16-cm 2-Way Speaker

Common Features Composite IMPP cone woofer using interlaced aramid fiber Butyl rubber surround for smoother response
20-cm woofer/66-mm cone midrange/18-mm dome tweeter 90 watts nominal power handling 2530,000 Hz, 93 dB, mm
30-mm PEI (poly-ether imide) balanced dome tweeter 3522,000 Hz, 91dB, mm

TS-G1611R

Increased installation versatility with extra tabs (16-cm/GM 17-cm compatibility) 30 watts nominal power handling 160 W MAX.

16-cm Dual-Cone Speaker

TS-A1681S

16 -cm 4 -Way Speaker

Common Features 16-cm metallic silver IMPP composite cone woofer Shallow basket design for installation versatility

3520,000 Hz, 91dB, mm

16-cm woofer/40-mm dome midrange/16-mm dome tweeter/ 10-mm dome supertweeter Glass-imide voice coil bobbin for higher power handling capabilities Long voice coil design Single conex damper Extended pole yoke design
Silver PET film dome supertweeter Full-depth basket for longer excursion and richer bass IMD (In-Mold Decorating) designed subgrille for cosmetic appeal 50 watts nominal power handling 3033,000 Hz, 91 dB, mm

TS-G1341R

130 W MAX.

13-cm 2-Way Speaker

TS-A1671S
30-mm PEI (poly-ether imide) balanced dome tweeter 6022,000 Hz, 91dB, mm
220 W MAX. Common Features Composite IMPP cone woofer using interlaced aramid fiber Butyl rubber surround for smoother response Lightweight balanced dome midrange with neodymium magnet and magnetic fluid Silver PET film dome tweeter 16-cm woofer/40-mm dome midrange/10-mm dome tweeter Glass-imide voice coil bobbin Polyester-imide resin coat voice coil Shallow-depth basket for installation versatility IMD (In-Mold Decorating) designed subgrille 35 watts nominal power handling 3033,000 Hz, 90 dB, mm

TS-G1311R

130 W MAX. Renault/DIN compatible basket 25 watts nominal power handling

13-cm Dual-Cone Speaker

Common Features 13-cm metallic silver IMPP composite cone woofer Shallow basket design for installation versatility

6020,000 Hz, 91dB, mm

TS-A4670R
4" 6" 3-Way Speaker

TS-G1041R

110 W MAX. 4" 6" (cm) composite IMPP cone woofer using interlaced aramid fiber High-energy strontium magnet (woofer) Glass-imide voice coil bobbin Conex damper 27 mm foamed PPC (Pearl Poly-Carbon) balanced dome midrange with magnetic fluid and neodymium magnet 10 mm film dome tweeter Custom-fit US/European compatible basket design 20 watts nominal power handling 4530,000 Hz, 90 dB, 53 mm Common Features 10-cm metallic silver IMPP composite cone woofer

10-cm 2-Way Speaker

30-mm PEI (poly-ether imide) balanced dome tweeter 8022,000 Hz, 91dB, mm

120 W MAX.

TS-G1011R

110 W MAX.

10-cm Dual-Cone Speaker
4-/2-hole compatibility (removable screw holes) 20 watts nominal power handling

8020,000 Hz, 91dB, mm

Composite IMPP Cone with Interlaced Aramid Fiber
TS-W8102SPL TS-W256DVC TS-A6971E TS-A1671S TS-W5102SPL TS-W305F TS-A6961E TS-A4 670R TS-W306C TS-W255F TS-A2511 TS-W306DVC TS-A6991S TS-A2011 TS-W256C TS-A6981S TS-A1681S
Long aramid fibers Skin layer
With long aramid fibers interlacing together inside, this IMPP cone design provides the strength and rigidity that powerful bass sound requires. High-density compressed internal architecture is resilient, stacks up against high power well and transfers sound quickly. The result is full-bodied, rich sound character with midrange depth that conventional IMPP cones cannot match.

TS-G4641R

4" 6" 2-Way Speaker

100 W MAX.

Long aramid fibers Aramid fibers inside the cone Regular IMPP cone IMPP cone with interlaced aramid fiber Composite IMPP cone with interlaced aramid fiber
4" 6" (cm) metallic silver IMPP composite cone woofer 30-mm PEI (poly-ether imide) balanced dome tweeter New custom-fit US/European compatible basket design 20 watts nominal power handling 4522,000 Hz, 91dB, 51 mm
Packaged Component PRS Speaker Systems TS-C171PRS

TS-C1625

16 -cm High- Grade Packaged Component Speaker System

(1) Requires use of CD text-ready Multi-CD player. (2) Requires use of digital compression and dynamic bass emphasis-ready Multi-CD player. (3) With CD-ROM and CD-R/RW discs.

85 0M P

D/T/I D/T/I D/T/I D/T/I M/D/I M/D/I M/D/I M/D/I D/T

D
D/T/I D/T/I D/T/I M/D/I M/D/I M/D/I D/T

D/T M/D

D/T/I 100

D/T/I M/D/I 100

D/T/I M/D/I 100 D/T

B D

D

D

D

M M M M M/D M/D M/D M/D

D

AUDIO (continued) DSP/EEQ Burr Brown D/A Converter (continued) Burr Brown advanced segment-type 24-bit D/A Converter High-performance 8 oversampling digital filter 5-mode preset equalizer Custom preset equalizer <2 = 2-mode, 1 = 1-mode> Auto EQ Auto EQ for 3-way network Digital SFC (Sound Field Control) <4 = 4-mode, 3 = 3-mode> BBE digital sound processing Digital listening position selector Time alignment <A = Auto> BMX (Bitmetric Equalizer) 16-band digital graphic equalizer <C = L/R common, I = L/R independent> Digital graphic equalizer <13 = 13-band, 9 = 9-band, 7 = 7-band> 31-band L/R independent equalizer 3-band parametric equalizer EQ-EX L/R independent 3-way crossover: high/mid/low 2-way crossover: HPF/LPF <LR = L/R independent> 3-way digital network Parametric bass/treble controls Bass Boost Selectable loudness <3 = 3-mode, 2 = 2-mode> Selectable FIE (Front Image Enhancer) ASL (Auto Sound Levelizer) (5-mode) 4-way independent L/R crossover network (high/mid/low/subwoofer) Direct Sub Drive Subwoofer control Loudness <2 = 2-mode selectable> BTB (Bass/Treble Booster) Fader Electronic volume/balance controls Electronic bass/treble controls Tone control <B = Bass, M = Mid, T = Treble> SLA (Source level adjuster) Spectrum analyzer <2 = 2-mode> Level indicator <2 = 2-mode> Cellular mute GENERAL Rotary Commander Rotary volume <P = Pop-up> Wireless remote controller <10 = 10-key direct access remote, C = Card, O = Optional> Steering remote controller Face type <A = Auto-slide, F = Flap-type, P = Pop-up> High-quality hairline aluminum front panel Detachable Face Security Clock <E = Entertainment> Dot-matrix OEL (Organic EL) display <FC = Full-color, PB = Pure Blue, B = Blue, W = White> LCD display <BW = Bluish-white, W = White, MC = Multi-color> Color changeable illuminated bar (10 colors) Brightness adjustment Contrast adjustment Auto antenna relay control terminal System control terminal Multi-language display (English/Spanish/Portuguese) Source CD control <E = External unit control> Source TV control (analog tuner control) Source DVD control <E = External unit control> iPod adapter ready <E = External unit control> External unit control via IP-Bus IP-Bus Bluetooth adapter ready <E = External unit control> AUX-In (with optional CD-RB10 and CD-RB20) <20 = CD-RB20 only> Direct AUX-in Display off Gold-plated screw-type power/ground terminals Copper-plated chassis OFC power/ground cable included Battery voltage meter Versatile horizontal/vertical mounting: 090 (5 steps switchable) IP-Bus output for direct head unit connection Entire chassis anti-vibration system Voice recognition with CD-VC60 6-m IP-Bus cable included Display with control key Built-in FM modulator (usable frequency; 87.9/88.1/88.3/88.5/88.7/88.9/ 89.1/89.3/89.5/89.7/89.9/90.1 MHz) Selectable modulation level Selectable pre-emphasis level Free space design display Uses 12-disc magazine JD-1212S (one included) Uses 6-disc magazine JD-612V (one included)

Cassette Players KEH-P4025 0.09 3016,87.5108.0 5301,640 5311,[0.8 V] 50 W 15 KEH-P2035 0.13 3016,000 52

FH-P5000MP 520,92

520,92 2020,90 87.5108.0 5301,640 5311,[0.7 V] 50 W 4 94 17
0.09 0.09 3019,000 3019,(67 w/ Dolby B) 61 (67 w/ Dolby B) 87.5108.0 5301,640 5311,[0.7 V] 50 W 4 87.5108.0 5301,640 5311,[1.0 V] 50 W 4 94 25
87.5108.0 5301,640 5311,[1.1 V] 45 W 15

Power Amplifier Features

G M 2 -7 G M -6 G M -5 G M -3 G M -D RS -A RS -A PR SPR SPR SPR PR PR SD5 PR SS0 D3 S-
Subwoofers & Speakers Specifications
Size TS-W01RS TS-M01RS 25 cm 17 cm 7.7 cm
Bridgeable 2/3/4-channel capability <F = Class-FD> Bridgeable 1/2/3-channel capability <F = Class-FD> Mono amplifier <D = Class-D> Current feedback amplifier L/R independent power supply Full balanced system (bridgeable connection) High-performance 32-bit floating binary point type DSP Built-in DSP (Digital Signal Processor) (FIR) Multi 24-bit Burr Brown D/A Converters Variable LPF/HPF (40120 Hz, 12 dB/oct., 4ch) Variable LPF/HPF (40120 Hz, 12 dB/oct.) Variable LPF (40240 Hz, 18/24 dB/oct.) Variable LPF (40240 Hz, 24 dB/oct.) Variable LPF (40240 Hz, 12 dB/oct.) LPF/HPF (80 Hz, 12 dB/oct.) for A and B channels LPF (80 Hz, 12 dB/oct.) High-voltage input level control (400 mV6.5 V) High-voltage input level control (200 mV6.5 V) High-voltage input level control (125 mV6.5 V) Input level/gain control Bass level control (22 to +12 dB) Low load impedance capability (4 ohm, 28 ohm allowable) Low load impedance capability (18 ohm) Optical digital input 3 optical digital outputs (mid/low/subwoofer) IP-Bus input/output RCA input and output terminals RCA input terminals Screw-type speaker terminals Large block-type speaker terminals Large screw-type power/ground terminals Large block-type power/ground terminals Speaker level input (1.6 V26 V) Speaker line input turn-on sensor Variable Bass Boost (40120 Hz, 0 to +12 dB) <R = Remote> Bass Boost (50 Hz, 0/+6/+9/+12 dB) <R = Remote> Subsonic filter (20 Hz, 18 dB/oct.) SYNC control PWM regulated power supply with MOSFET switching High-performance balanced isolator circuit High-efficiency MOSFET output section MASS (Multiple Amplifier Synchronization System) Sound master clock DAC volume All terminals placed on one side Removable terminal/settings cover Copper-plated chassis Black heatsink Aluminum die-cast heatsink

F F (1) D D D

Cut-Out Dimension

G G G G G G

G (5) G G

(1) Channel capability: 1/2-channel only (2) For 2ch only (3) Crossover slope: 18 dB/oct. only (4) L/R independent (5) Carved gold-plated (6) Large-screw type (7) 8-gauge (8) 0-gauge (9) 4-gauge (10) Bass Boost level: 0/+6/+12 dB only

Mounting Depth