Amplifier Section

Subwoofer & Speaker Section

Details on page 18.

RCA RCA

RCA INPUT

RCA input can be connected with head unit featuring RCA output for preamp signal.
IMPP (Injection-Molded Polypropylene) Composite Cone
Pioneer uses a special injection molding process rather than pressing polypropylene speaker cones. This process ensures uniform cone thickness for superior linearity and clarity. Whats more, Pioneers Composite technology guarantees the perfect mix of polypropylene and carbon fiber, graphite and other materials to optimize the speaker cone for its specific application (woofers, midranges, tweeters, etc.).
Class-FD ICEpower Amplifiers

Details on page 16.

RCA INPUT/OUTPUT
RCA input can be connected with a head unit featuring RCA output for preamp signal. RCA output can be connected with additional amplifiers for a multi-amp system configuration.

HPF LPF

IN/OUT

High Pass Filter

Low-range sound is filtered off according to userset cut-off frequency. Mid- and high-range sounds are transferred to the speaker.

SPEAKER INPUT

This allows a Pioneer amplifier to be connected to an OEM radio without requiring costly add-on adapters. The added flexibility allows your Pioneer amplifier to be a part of your system as it grows.

KEVLAR Brand Fiber

Characterized by lightness, strength, and low resonance to powerful input, KEVLAR Brand Fiber is excellent for speaker diaphragms, helping to produce more detailed, accurate sound.

Low Pass Filter

Mid- and high-range sounds are filtered off according to user-set cut-off frequency. Low-range sound is transferred to the woofer.
VCCS (Voice Coil Cooling System)
Typically, the longer and louder you play your subwoofer, the hotter it gets. This changes its electrical and mechanical characteristics and adversely affects sound quality. Pioneers Voice Coil Cooling System (VCCS) draws heat away from the inside of the subwoofer, reducing temperatures by up to 30C. In the simplest terms, it keeps your sound crisp and your subwoofer from losing its cool.

PRINTED ON

100% RECYCLED

PAPER.

Printed with soy ink on 100% recycled paper.
Pioneer Environmental Mark Symbol of environmental preservation activities You already know that Pioneer is committed to improving the quality of car audio environments. But Pioneer is also making a commitment to the quality of the earths environment. For one thing, the brochure youre holding is printed on recycled paper. In addition, Pioneer Corporation has begun to pack its car audio products in Environmentally Friendly Pulp Mold Packaging a new material made from paper pulp and recycled paper, newspapers and magazines. This is in direct resp onse to increasing evidence that st y rofo am packaging harms the environment. The switch signals a worldwide move away from styrofoam by the Pioneer Corporation and underscores Pioneers commitment to help safeguard our planet. Visit us on the World Wide Web at

For more information, call or write to:
http://www.pioneer.com.sg
Published by Pioneer Corporation. Copyright 2006 by Pioneer Corporation. All rights reserved. Specifications and design may be subject to modification without notice. Product colors and illumination may differ in photographs from actual appearance, due to effects of printing and photography. Code No.: 8102F Name: 06 CE AUDIO GENERAL (E-GS) ADKI 03-06 Printed in Japan.

WMA/MP3 Players

The Road Ahead: The World Beyond
Single-CD Player 2-DIN Players Multi-CD Players Cassette Players ODR & Pure Component Systems
When you rule the road, anything is possible. So go to the edge of sensation with Pioneer. Driving the power of technology into the upper stratosphere. Extending audio media deeper into the digital frontier. Turbocharging your experience of entertainment beyond convention. Take to the street, and all points beyond. There are no limits to how far your senses can go. Your threshold of pleasure is about to rise. Are you ready?

Power Amplifiers

Play Your Heart Out
Pioneers new WMA/MP3 and Single-CD players provide enough incomparable performance and flexibility for you to experience sound that is pristine and powerful as you like. These players are equipped with EEQ (Easy Equalizer) for accurate adjustment of sound according to taste. The EEQ for the DEH-P6850MP, DEH-P4850MPH and DEH-3850MPH models even include Bass Boost for greater depth and impact. Pioneers 50 W 4-channel high-power MOSFET amplifiers virtually eliminate distortion within high-frequency ranges, with minimal loss of sounds integrity throughout signal processing.
Put More Dazzle on Display
No other head units visual dimension has ever looked this dynamic. At the head of the class, Pioneer presents the full-color dot-matrix OEL (Organic EL) display for the DEH-P8850MP head unit. Its great for viewing movies, visualizers and BGPs (Background Pictures) in a dazzling array of colors that you would miss if you were watching on a less capable display. MP3 (DEH-P8850MP) Also, new Pure Blue OEL displays for the DEH-P6850MP and DEH-P5850MPH take blue OEL display technology to the height of cool style and distinctive performance. Surf & Snow (DEH-P6850MP)
Get Your Sound into Perfect Shape
To ensure pure quality and flexibility in audio reproduction, advanced DSP (Digital Signal Processing) for the DEH-P8850MP and DEH-P80RS integrates several Pioneer innovations, including: new 16-band Graphic Equalizer with an expanded frequency range for fine-tuning the sound curve with extra precision; Auto EQ functionality; and Burr Brown D/A Converter* for superior signal resolution for sound that remains true to the original source over an extraordinarily wide dynamic range; and 3-way Network mode/Standard mode for extra Auto Time Alignment**.

DEH-P8850MP

4 - Channel High-Power WMA/MP3/A AC/CD Receiver
With an unprecedented full-color OEL display, multi-format digital file playback and versatile DSP, the leading face among Pioneer head units has a kaleidoscopic array of entertaining capabilities.
Full-color dot-matrix OEL (Organic EL) display iTunes AAC playback WAV file playback iPod adapter ready Burr Brown D/A Converter Built-in DSP EEQ 5-mode preset equalizer 2-mode custom preset equalizer Auto EQ BBE digital sound processing* Digital listening position selector Auto time alignment BMX (Bitmetric Equalizer) L/R common 16-band digital graphic equalizer 2-way crossover: HPF/LPF ASL (Auto Sound Levelizer) Auto-slide face Rotary Commander 3 RCA preouts (front + rear + subwoofer) Level indicator Spectrum analyzer Multi-language display (English/Spanish/Portuguese)
*BBE: Licensed by BBE Sound, Inc. under USP4638258 and 4482866. BBE and BBE symbol are registered trademarks of BBE Sound Inc.
CD CONTROL 3 RCA BUILT-IN DSP PC-LINK READY CD TEXT
SUPERTUNER IIID HI-VOLTAGE PREOUT EEQ BBE DIGITAL DIN-D
Finding the sweet spot or optimal listening position is complicated by sounds reflection and damping, as well as variable speaker positioning in the irregularly shaped confines of a car. Such conditions tend to degrade frequency characteristics. Auto EQ helps you enjoy the best sound quality you can get in a car, using a microphone to monitor acoustic conditions, then automatically setting frequency response curve equalization. Its like having a sound engineer customize your in-car sound system.
Auto EQ Adjustment Example
After adjustment Response (dB)
Microphone for Auto EQ frequency band fine-tuning Before adjustment 20 Frequency (Hz) 20 k
For smoother low- to high-range sound.
Full-Color OEL (Organic EL) Display
Choose among four types of gauges to view battery voltage, tachometer and sound level information.
Pioneering the First Receiver with 65,536-Color OEL Display Pioneer presents the DEH-P8850MP with full-color (65,536-color*) OEL display capable of displaying motion and 3D animated graphics in multiple colors. Featuring OEL technology that is arguably the greatest advance in car entertainment displays since the detachable face was introduced, this innovation complements Pioneers renowned audio quality with a dash of uniquely brilliant visual impact.

CD-R/RW playback with skip play Built-in FM modulator Display with control key Wireless card remote controller (included)
ADPS (Automatic Disc Program Selection) Disc title memory: 100 titles ITS (Instant Track Selection) IP-Bus output for direct head unit connection

FH-P5000MP

4 - Channel High-Power WMA/MP3/CD/Cassette Receiver
WAV file playback iPod adapter ready BMX (Bitmetric Equalizer) Burr Brown D/A Converter Built-in DSP EEQ 5-mode preset equalizer 2-mode custom preset equalizer BBE digital sound processing Digital listening position selector Time alignment Digital 13-band graphic equalizer 2-way crossover: HPF/LPF Auto-slide face Dolby B NR Color changeable illuminated bar (10 colors, plus Rainbow and Mirage modes) Rotary volume 2 RCA preouts: selectable (front + rear/front + subwoofer) Level indicator 7-band spectrum analyzer

C a s s e t t e

KEH-P4025
4 - Channel High-Power Cassette Receiver

KEH-P2035

CD CONTROL BUILT-IN DSP 2-DIN

DOLBY B NR EEQ

SUPERTUNER IIID BBE DIGITAL

2 RCA selectable CD TEXT

CD CONTROL EEQ

SUPERTUNER DIN-D

45 W 4 MAX. 1 RCA

CD CONTROL DIN-D

SUPERTUNER

FH-P4200MP

4 - Channel High-Power WMA/MP3/A AC/CD/Cassette Receiver
iTunes AAC playback WAV file playback iPod adapter ready BMX (Bitmetric Equalizer) Digital direct Built-in DSP EEQ 5-mode preset equalizer 2-mode custom preset equalizer 3-mode digital SFC BBE digital sound processing Digital listening position selector Digital 9-band graphic equalizer 2-way crossover: HPF/LPF Dolby B NR Rotary volume 1 RCA preout: selectable (subwoofer/non-fading) 5-band spectrum analyzer Level indicator
iPod adapter ready EEQ 5-mode preset equalizer 1-mode custom preset equalizer 3-mode selectable loudness Selectable FIE (Front Image Enhancer) Full-logic mechanism
1 RCA preout (rear) Multi-CD control Optional remote controller available CD-R30-02
(Optional remote controller)
iPod adapter ready BTB (Bass/Treble Booster) 2-mode selectable loudness

Mode select switch must be in SYNCINV position. Wiring for speaker must be 10 AWG minimum. Signal source

4 minimum 3,000 W

Mode select switch must be in SYNC position.
*2 minimum speaker impedance for this configuration or damage will occur. **4 minimum speaker impedance for this configuration or damage will occur. Caution: Having more than four amps in a sync configuration is not recommended. Sine waves can put excessive stress on an audio system, so if a sine wave source is used at high output level, damage can occur.
Load may be any combination of speakers but impedance must be 2 or larger.
The Ultimate in Audio Tech
Pioneers new Pure Component Systems and ODR (Optical Digital Reference) Systems optimize the quality of sound and control in every detail for the in-car audio experience of a lifetime.
Load may be any combination of speakers but impedance must be 4 or larger.

PRS-A700

600 W MAX. LPF HPF RCA INPUT
4 - Channel Bridgeable Power Amplifier

PRS-A500

600 W MAX. LPF
2- Channel Bridgeable Power Amplifier
For Component Single-CD Player

RS-D7R DEX-P90RS

For Digital Signal Processor

RS-A9 DEQ-P90

Hi-Bit Conversion The RS-D7R and DEX-P90RS upgrade the original CD audio signals from 16-bit to 24-bit, and increase CD data resolution by a factor of 256. The result: lower quantization noise, expanded dynamic range, minimal processing error, and superior linearity, delivering sound as it was meant to be reproduced and heard.
4-Way L/R Independent Digital Crossover Network Optimize the balance of speaker output by adjusting sound pressure level or left and right channels independently, according to listener position and system configuration. Time Alignment
HPF RCA INPUT Carved gold-plated RCA input terminals Gold-plated screw-type speaker terminals Gold-plated large screw-type power/ground terminals PWM regulated power supply with MOSFET switching High-performance balanced isolator circuit High-efficiency MOSFET output section 100 W 2 (4 )/300 W 1 (4 )/ 150 W 2 (2 ) (continuous power) 200 W 2 (4 )/600 W 1 (4 ) (max. power) Bridgeable 1/2/3-channel capability Current feedback amplifier L/R independent power supply Variable LPF/HPF (40120 Hz, 12 dB/oct.) High-voltage input level control (200 mV6.5 V) Input level/gain control (L/R independent) Low load impedance capability (28 ohm) Carved gold-plated RCA input terminals Gold-plated screw-type speaker terminals Gold-plated large screw-type power/ground terminals PWM regulated power supply with MOSFET switching High-performance balanced isolator circuit High-efficiency MOSFET output section

For RS and PRS Power Amplifiers
Current Feedback Type Power Amplifier Circuitry* For high-resolution sound amplification, this circuitry uses MOSFET** in the final output stage for extremely high slew rate that results in quicker input signal response, wide range characteristics and low distortion.
*RS-A9/RS-A7/PRS-A700/PRS-A500 **PRS-D5000SPL/PRS-D3000SPL/PRS-A700/PRS-A500
Signal output of each speaker can be calibrated in 1/20,000-second* increments, for optimal phasing of sound from the system, according to listener position. Precise equalization and suppression of frequency response disturbance makes for a clearer, more focused soundstage.

*RS-A9: 1/40,000-second

L/R Independent Power Supply* This new circuit designs L/R independent symmetric layout improves channel separation. Independently mounted large DC-DC converter power supply directs electric current more effectively, with superior stability.
*RS-A9/RS-A7/PRS-A700/PRS-A500
31-Band L/R Independent Digital Equalizer This finely tunes equalization of the sound curve and independently adjusts for slight differences between left and right channel frequency response for truer, clearer sound.
50 W 4 (4 )/150 W 2 (4 )/ 75 W 4 (2 ) (continuous power) 100 W 4 (4 )/300 W 2 (4 ) (max. power) Bridgeable 2/3/4-channel capability Current feedback amplifier L/R independent power supply Variable LPF/HPF (40120 Hz, 12 dB/oct.) for A and B channels High-voltage input level control (200 mV6.5 V) Input level/gain control (L/R independent) Low load impedance capability (28 ohm)
Reference Sound Systems DEH-P80RS
Component CD Player/Receiver

TS-C171PRS

17-cm Packaged Component Speaker System

TS-C131PRS

13-cm Packaged Component Speaker System
CD CONTROL HI-VOLTAGE PREOUT BBE DIGITAL
SUPERTUNER IIID+ BUILT-IN DSP CD TEXT

3 RCA EEQ DIN-D

White dot-matrix OEL (Organic EL) display Aluminum-plated face panel iTunes AAC playback WAV file playback iPod adapter ready Burr Brown advanced segmenttype D/A Converter Built-in DSP EEQ 5-mode preset equalizer 2-mode custom preset equalizer Auto EQ Auto EQ for 3-way network BBE digital sound processing Digital listening position selector

Auto time alignment BMX (Bitmetric Equalizer) L/R independent 16-band digital graphic equalizer L/R independent 2-way crossover: HPF/LPF L/R independent 3-way crossover: high/mid/low ASL (Auto Sound Levelizer) Auto-slide face Rotary Commander 3 gold-plated RCA preouts (front + rear + subwoofer) Level indicator Spectrum analyzer Multi-language display (English/Spanish/Portuguese) 200 W MAX.

Rear view

2-DIN Players 2-DIN Players Multi-CD Players Multi-CD Players
150 W MAX. 50 watts nominal power handling 2532,000 Hz, 88 dB, mm 13-cm woofer 30 watts nominal power handling 3532,000 Hz, 88 dB, mm

PRS-D4000F

1200 W MAX. LPF HPF RCA INPUT/OUTPUT SPEAKER INPUT
Class-FD 4 -/2- Channel Bridgeable Amplifier
75 W 4 (4 )/300 W 2 (4 )/ 150 W 4 (2 ) (continuous power) 150 W 4 (4 )/600 W 2 (4 ) (max. power) Bridgeable 2/3/4-channel capability Variable LPF/HPF (40120 Hz, 12 dB/oct., 4 ch) High-voltage input level control (400 mV6.5 V) Load impedance capability (28 ohm) Gold-plated RCA input and output terminals Gold-plated screw-type speaker terminals All terminals placed on one side Removable terminal/settings cover Speaker level input (1.6 V26 V) Speaker line input turn-on sensor High-efficiency MOSFET output section High-performance balanced isolator input circuit Aluminum die-cast heatsink
17-cm woofer Shallow mount adapters included
Common Features 3-layer aramid fiber with IMPP composite cone High density micro fiber surround for smoother response Short voice coil & wide magnetic field design for symmetric & linear cone motion Dual OFC short ring for reduced distortion Aluminum die-cast bottom hold one-piece rigid chassis Aluminum die-cast center plug 28-mm lightweight soft-dome tweeter
Cancel magnet design for extremely high density magnetic field Rear chamber for lower crossover frequency Aluminum die-cast tweeter chassis Surface (angled), flush or invisible tweeter mounting kit Audiophile-grade outboard crossover network included with 12 dB/oct. LPF/HPF Protection circuit and 3-step tweeter level adjustment Gold-plated screw-type terminals
TS-C171PRS/TS-C131PRS Tweeter Specifications Dimensions (W H D): 55 27.1 mm (surface mount) Mounting depth: 12.2 mm Cut-out dimensions: 47 mm *See page 35 for woofer dimensions.

PRS Speakers

PRS-D2000T
Class-FD 2- Channel Bridgeable Amplifier
150 W 2 (4 )/600 W 1 (4 )/ 300 W 2 (2 ) (continuous power) 300 W 2 (4 )/1,200 W 1 (4 ) (max. power) Bridgeable 1/2-channel capability Variable LPF/HPF (40120 Hz, 12 dB/oct., 2 ch) High-voltage input level control (400 mV6.5 V) Load impedance capability (28 ohm) Gold-plated RCA input and output terminals Gold-plated screw-type speaker terminals All terminals placed on one side Removable terminal/settings cover Speaker level input (1.6 V26 V) Speaker line input turn-on sensor Bass Boost Remote (50 Hz, 0/+6/+9/+12 dB) High-efficiency MOSFET output section High-performance balanced isolator input circuit Aluminum die-cast heatsink

Aluminum dust cap C-shaped nodes*
Air-Suspension Control System Thanks to Pioneers unique Air-Suspension Control System, TS-SW subwoofers offer deep, rich bass in a shallow, compact form. Air is trapped within the composite IMPP TM double cone, between the main cone and the drive cone behind it. The pressure
4TH-ORDER BAND PASS ENCLOSURES
Frequency Changes Before and After Reliability Test Hz Hz 28 Hz 25
Conventional subwoofers Subwoofer with Air-Suspension Control System
Surround with M-shape cross-section*
Air-suspension control system*

Before test

24 Hz After test
Cast aluminum basket with fin-shaped design
T-pole yoke design* Spring compression wire terminals High-energy strontium magnet *Patent pending
The 4th-order band pass enclosure is basically a sealed enclosure with the addition of a ported enclosure in front of the driver, which acts as an acoustical filter. The resulting system radiates sound in a limited bandwidth. Band pass enclosures usually demonstrate a higher sensitivity compared to sealed enclosures. The disadvantage, however, is that it uses more trunk space. 4th-order band pass systems are a bit more flexible in design than sealed or bass reflex
enclosures, due to the ability to change many parts of the enclosure as front and back volume, as well as the port length. The benefit of this is that the frequency response as well as the sensitivity of the system can be defined more freely compared to sealed or bass reflex enclosures. Nevertheless, a very decent bass reproduction can be achieved with a well-tuned system.

Sealed chamber

Ported chamber
Larger Recommended Smaller Port

TS-W301R

30 -cm (12 " ) Component Subwoofer
800 W MAX. Blue IMPP composite cone 4-layer, long voice coil Single nomex damper Extended excursion design Extended and vented pole yoke Best tuned parameters Spoke grille compatible (UD-G306) 150 watts nominal power handling 204,000 Hz, 91dB, 28.356.6 l (1.02.0 cu. ft.), mm
Component Enclosed & Linear Power Subwoofers TS-WX11A

150 W MAX.*

*Output Power
cm Sealed Active Subwoofer
Built-in MOSFET 150 W max. monaural amplifier cm aluminum and IMPP composite cone woofer with strontium magnet Wired remote control (input level, crossover frequency, phase) Speaker and RCA level inputs Built-in variable LPF (50125 Hz, 12 dB/oct.) Aluminum die-cast heatsink 50 watts nominal power handling 54200 Hz, 101 dB/1 W (In-car), 200 mm

TS-D161S

16 -cm 2-Way Speaker

260 W MAX.

16-cm woofer/28-mm dome tweeter Dual-layer KEVLAR Brand Fiber with Rigilite IMPP composite cone woofer Single conex damper Copper ring Extended pole yoke design Butyl rubber surround for smoother response Glass-imide voice coil bobbin Lightweight balanced dome tweeter with neodymium magnet Wave guides for dispersion control Rear chamber for lower crossover frequency Built-in crossover network: LPF; 12 dB/oct. (for woofer)/HPF; 12 dB/oct. (for tweeter) Newly-designed full-depth basket boasting much higher compressive strength and better damping Full-depth basket for rich bass response 60 watts nominal power handling 2732,000 Hz, 90 dB, mm

TS-A Series Speakers

With high power handling and cone composition designed to handle powerful bass beautifully, TS-A speakers are excellent for delivering music with full dynamism intact. They are also supremely competent at performing up to the demands of all the latest music, with an assertive sonic signature that perfectly complements the qualities of Pioneer high-power decks and amplifiers. TS-A speakers keep getting better, with cones, magnets, surrounds, voice coil wire, basket and other components upgrading performance with next-generation technology and power handling.

TS-A6991S

TS-E Series Speakers
Originally created to suit Europes listening preferences, versatile TS-E speakers beautifully reproduce a world of music for a world of listeners to enjoy. Their hybrid composite cones are specially designed to deliver tone neutral enough to complement subtle detail without excessively coloring the original sound.

460 W MAX.

6" 9" 5 -Way Speaker
6" 9" (cm) woofer/57-mm dome midrange/37-mm cone tweeter/18-mm dome supertweeter/12-mm dome supertweeter Silver PET film cone tweeter with neodymium magnet Silver PET film ceramic dome supertweeter 2535,000 Hz, 93 dB, 122 mm

TS-E6996

6" 9" 3-Way Speaker

TS-A6981S

420 W MAX. 6" 9" (cm) woofer/43-mm midrange/12-mm tweeter KEVLAR Brand Fiber/pulp composite cone woofer Butyl rubber surround for smoother response Heat-resistant long voice coil Pure magnesium balanced dome midrange with neodymium magnet Dome tweeter Full-depth basket for longer excursion and richer bass 80 watts nominal power handling 2532,000 Hz, 91 dB, 119.5 mm

TS-A2011

Glass-imide voice coil bobbin for higher power handling capabilities PET film cone midrange with magnetic fluid PET film dome tweeter 350 W MAX.

TS-G1641R

160 W MAX.

16-cm 2-Way Speaker

Common Features Composite IMPP cone woofer using interlaced aramid fiber Butyl rubber surround for smoother response
20-cm woofer/66-mm cone midrange/18-mm dome tweeter 90 watts nominal power handling 2530,000 Hz, 93 dB, mm
30-mm PEI (poly-ether imide) balanced dome tweeter 3522,000 Hz, 91dB, mm

TS-G1611R

Increased installation versatility with extra tabs (16-cm/GM 17-cm compatibility) 30 watts nominal power handling 160 W MAX.

16-cm Dual-Cone Speaker

TS-A1681S

16 -cm 4 -Way Speaker

Common Features 16-cm metallic silver IMPP composite cone woofer Shallow basket design for installation versatility

3520,000 Hz, 91dB, mm

16-cm woofer/40-mm dome midrange/16-mm dome tweeter/ 10-mm dome supertweeter Glass-imide voice coil bobbin for higher power handling capabilities Long voice coil design Single conex damper Extended pole yoke design
Silver PET film dome supertweeter Full-depth basket for longer excursion and richer bass IMD (In-Mold Decorating) designed subgrille for cosmetic appeal 50 watts nominal power handling 3033,000 Hz, 91 dB, mm

TS-G1341R

130 W MAX.

13-cm 2-Way Speaker

TS-A1671S
30-mm PEI (poly-ether imide) balanced dome tweeter 6022,000 Hz, 91dB, mm
220 W MAX. Common Features Composite IMPP cone woofer using interlaced aramid fiber Butyl rubber surround for smoother response Lightweight balanced dome midrange with neodymium magnet and magnetic fluid Silver PET film dome tweeter 16-cm woofer/40-mm dome midrange/10-mm dome tweeter Glass-imide voice coil bobbin Polyester-imide resin coat voice coil Shallow-depth basket for installation versatility IMD (In-Mold Decorating) designed subgrille 35 watts nominal power handling 3033,000 Hz, 90 dB, mm

TS-G1311R

130 W MAX. Renault/DIN compatible basket 25 watts nominal power handling

13-cm Dual-Cone Speaker

Common Features 13-cm metallic silver IMPP composite cone woofer Shallow basket design for installation versatility

6020,000 Hz, 91dB, mm

TS-A4670R
4" 6" 3-Way Speaker

TS-G1041R

110 W MAX. 4" 6" (cm) composite IMPP cone woofer using interlaced aramid fiber High-energy strontium magnet (woofer) Glass-imide voice coil bobbin Conex damper 27 mm foamed PPC (Pearl Poly-Carbon) balanced dome midrange with magnetic fluid and neodymium magnet 10 mm film dome tweeter Custom-fit US/European compatible basket design 20 watts nominal power handling 4530,000 Hz, 90 dB, 53 mm Common Features 10-cm metallic silver IMPP composite cone woofer

10-cm 2-Way Speaker

30-mm PEI (poly-ether imide) balanced dome tweeter 8022,000 Hz, 91dB, mm

120 W MAX.

TS-G1011R

110 W MAX.

10-cm Dual-Cone Speaker
4-/2-hole compatibility (removable screw holes) 20 watts nominal power handling

8020,000 Hz, 91dB, mm

Composite IMPP Cone with Interlaced Aramid Fiber
TS-W8102SPL TS-W256DVC TS-A6971E TS-A1671S TS-W5102SPL TS-W305F TS-A6961E TS-A4 670R TS-W306C TS-W255F TS-A2511 TS-W306DVC TS-A6991S TS-A2011 TS-W256C TS-A6981S TS-A1681S
Long aramid fibers Skin layer
With long aramid fibers interlacing together inside, this IMPP cone design provides the strength and rigidity that powerful bass sound requires. High-density compressed internal architecture is resilient, stacks up against high power well and transfers sound quickly. The result is full-bodied, rich sound character with midrange depth that conventional IMPP cones cannot match.

TS-G4641R

4" 6" 2-Way Speaker

100 W MAX.

Long aramid fibers Aramid fibers inside the cone Regular IMPP cone IMPP cone with interlaced aramid fiber Composite IMPP cone with interlaced aramid fiber
4" 6" (cm) metallic silver IMPP composite cone woofer 30-mm PEI (poly-ether imide) balanced dome tweeter New custom-fit US/European compatible basket design 20 watts nominal power handling 4522,000 Hz, 91dB, 51 mm
Packaged Component PRS Speaker Systems TS-C171PRS

TS-C1625

16 -cm High- Grade Packaged Component Speaker System
16-cm woofer/27-mm tweeter 16-cm/GM 17-cm compatible frame 3D magnesium hybrid cone woofer with slitted bullet shape equalizer Pure titanium dome tweeter Triangular butyl rubber surround High-performance neodymium magnet (tweeter) Flush swivel mounting cup and slant spacer Outboard screw-type crossover (LPF/HPF: 12 dB/oct.) Tweeter level control (0 dB, 3 dB) 60 watts nominal power handling 3032,000 Hz, 91 dB, mm
See page 17 for details about this product.
See page 17 for details about this products.
TS-C1625 Tweeter Specifications Dimensions (W H D): 41 mm (surface mount) Cut-out dimensions: 41 mm
Mounting depth: 20 mm *See page 35 for woofer dimensions.

TS-C1602

Rear view Rear view
16-cm Packaged Component Speaker System
150 W MAX. HR 16-cm woofer/13-mm tweeter 2-way surface mounting capabilities (tweeter) 50 watts nominal power handling 3025,000 Hz, 90 dB, mm Common Features HR (Hydro-Resistant) cone woofer/midrange PEI (poly-ether imide) dome tweeter with magnetic fluid

TS-C1002

150 W MAX.
10-cm Packaged Component Speaker System
HR 10-cm midrange/13-mm tweeter 50 watts nominal power handling 6025,000 Hz, 90 dB, mm In-line passive crossover included (HPF, 12 dB/oct.) Aluminum short ring Flush and surface mounting capabilities (tweeter)

Frequency Response 20 Hz3,000 Hz 35 Hz11,000 Hz 70 Hz24,000 Hz (1) 160 Hz24,000 Hz (2) 1,200 Hz48,000 Hz 15 Hz2,000 Hz 25 Hz9,000 Hz 60 Hz30,000 Hz 1,200 Hz32,000 Hz 25 Hz32,000 Hz 35 Hz32,000 Hz 15 Hz1,500 Hz 18 Hz2,000 Hz 18 Hz700 Hz 18 Hz1,000 Hz 20 Hz4,000 Hz 20 Hz4,500 Hz 18 Hz1,000 Hz 20 Hz1,000 Hz 30 Hz1,500 Hz 18 Hz500 Hz 18 Hz600 Hz 20 Hz2,000 Hz 20 Hz2,500 Hz 54 Hz200 Hz 40 Hz200 Hz 35 Hz200 Hz 25 Hz200 Hz 22 Hz32,000 Hz 27 Hz32,000 Hz 25 Hz32,000 Hz 25 Hz32,000 Hz 28 Hz32,000 Hz 40 Hz32,000 Hz 45 Hz30,000 Hz 30 Hz32,000 Hz 25 Hz35,000 Hz 25 Hz33,000 Hz 25 Hz30,000 Hz 28 Hz28,000 Hz 25 Hz30,000 Hz 25 Hz30,000 Hz 30 Hz33,000 Hz 30 Hz33,000 Hz 45 Hz30,000 Hz 28 Hz32,000 Hz 28 Hz28,000 Hz 35 Hz22,000 Hz 35 Hz20,000 Hz 60 Hz22,000 Hz 60 Hz20,000 Hz 80 Hz22,000 Hz 80 Hz20,000 Hz 45 Hz22,000 Hz 25 Hz32,000 Hz 35 Hz32,000 Hz 30 Hz32,000 Hz 40 Hz32,000 Hz 30 Hz32,000 Hz 30 Hz25,000 Hz 60 Hz25,000 Hz 6,000 Hz40,000 Hz 3,000 (8) / 1,200 Hz (9) 26,000 Hz 2,500 Hz30,000 Hz 2,500 Hz30,000 Hz 140 Hz30,000 Hz 90 Hz30,000 Hz 25 Hz30,000 Hz 30 Hz30,000 Hz
Sensitivity 86 dB 89 dB 86 dB 95 dB 92 dB 88 dB 86 dB 90 dB 88 dB 88 dB 91dB 88 dB 89 dB 87 dB 84 dB 83.5 dB 88 dB 87 dB 85 dB 89 dB 87 dB 94 dB 92 dB 101 dB (5) 101 dB 107 dB (5) 104 dB (6) 91 dB 90 dB 91 dB 91 dB 91 dB 90 dB 90 dB 91 dB 93 dB 93 dB 93 dB 93 dB 93 dB 93 dB 91 dB 90 dB 90 dB 93 dB 91 dB 91 dB 91 dB 91 dB 91 dB 91 dB 91 dB 91 dB 90 dB 90 dB 90 dB 90 dB 91 dB 90 dB 90 dB 97 dB
Impedance 2 or 1 or or or or 4 8
Dimensions (W H D) mm mm 90 42.5 mm (1) mm (2) mm mm mm mm 55 27.1 mm mm mm 400 359.5 mm mm mm mm mm mm 329.0 97.9 mm 282.0 89.6 mm 218.4 75.2 mm mm mm mm mm 200 mm 110 mm 412 mm 282 mm 118 mm mm 119.5 mm mm 179 89.5 mm 155 78.3 mm mm mm 122 mm 121 mm 119 mm 105 mm mm mm mm mm 53 mm 123.2 mm 176 mm mm mm mm mm mm mm 51 mm 171 83.5 mm (7) 155 77.3 mm (7) mm 171 77.8 mm mm (7) mm (7) mm (7) mm
Mounting Depth 75 mm 69 mm 37.5 mm (1) 60 mm (2) 46 mm 133 mm 67 mm 46 mm 12.2 mm 67 mm 57.3 mm 312 mm 266 mm 185 mm 165 mm 145 mm 135 mm 82.9 mm 75.6 mm 63.5 mm 157 mm 143 mm 146 mm 131 mm 89 mm 59 mm 88.8 mm 96 mm 66 mm 57.3 mm 46.3 mm 60.5 mm 87 mm 86 mm 85 mm 71 mm 116 mm 97 mm 57 mm 44 mm 45 mm 90.5 mm 88 mm 42 mm 44 mm 46 mm 46 mm 43 mm 43 mm 45 mm 60.5 mm (7) 56.5 mm (7) 60.5 mm (7) 55.3 mm (7) 60.5 mm (7) 59 mm 43 mm
Cut-Out Dimensions 238 mm 151 mm 72.5 mm (1) 77 mm (2) 68 mm 278 mm 158 mm 90 mm 47 mm 140 mm 121 mm 352 mm 278 mm 278 mm 238 mm 278 mm 238 mm 278 mm 238 mm 186 mm 278 mm 238 mm 278 mm 238 mm mm 128 mm mm 186 mm 147 mm 121 mm 117 mm 128 mm mm mm mm mm 232 mm 186 mm 128 mm 128 mm mm mm 186 mm 128 mm 128 mm 121 mm 121 mm 106 mm 106 mm mm 128 mm (7) 121 mm (7) 128 mm (7) 121 mm (7) 128 mm (7) 158 mm (7) 102 mm (7)