Here you can find all about Pioneer DEH-P5950IB like manual and other informations. For example: review.
Pioneer DEH-P5950IB manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Pioneer DEH-P5950IB please write about it to help other people. [ Report abuse or wrong photo | Share your Pioneer DEH-P5950IB photo ]
Pioneer DEH-P5950ib Car Audio, size: 1.3 MB
Pioneer DEH P5950IB
User reviews and opinions
|Quito||2:56pm on Saturday, April 3rd, 2010|
|Great deck for the money. I purchased this for my 1988.5 Suzuki Samurai, mainly to add Ipod support.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Attaching the front panel
% Replace the front panel by holding it upright to the unit and clipping it securely into the mounting hooks.
About the demo mode
This unit features the feature demo mode.
Important The red lead (ACC) of this unit should be connected to a terminal coupled with ignition switch on/off operations. If this is not done, the vehicle battery may be drained.
Removing the front panel
1 Press OPEN to open the front panel. 2 Grip the left side of the front panel and pull it gently outward. Take care not to grip it too tightly or to drop the front panel and protect it from contact with water or other fluids to prevent permanent damage.
3 Put the front panel into provided protective case for safe keeping.
Feature demo mode The feature demo automatically starts when power to this unit is turned off while the ignition switch is set to ACC or ON. Pressing button 6 during feature demo operation cancels the feature demo mode. Press button 6 again to start the feature mode. Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power.
Before You Start Use and care of the remote control
Installing the battery
Slide the tray out on the back of the remote control and insert the battery with the plus (+) and minus () poles pointing in the proper direction. ! When using for the first time, pull out the film protruding from the tray. ! The remote control may not function properly in direct sunlight.
Important ! Do not store the remote control in high temperatures or direct sunlight. ! Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal.
Keep the battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.
! Use only one CR2025 (3 V) lithium battery. ! Remove the battery if the remote control is not used for a month or longer. ! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. ! Do not handle the battery with metallic tools. ! Do not store the battery with metallic materials. ! In the event of battery leakage, wipe the remote control completely clean and install a new battery. ! When disposing of used batteries, please comply with governmental regulations or environmental public institutions rules that apply in your country/area.
5 To perform fast forward or reverse, press and hold c or d.
6 To skip back or forward to another track, press c or d.
Notes ! There is sometimes a delay between starting up disc playback and the sound being issued. When being read, FORMAT READ is displayed. ! If an error message such as ERROR-11 is displayed, refer to Understanding error messages on page 31. ! When playing CD-EXTRA or MIXED-MODE CDs, compressed audio and CD-DA can be switched by pressing BAND. ! If you have switched between compressed audio and CD-DA, playback starts at the first track on the disc. ! When playing back VBR (variable bit rate) recorded files, elapsed play time may not be displayed correctly.
1 Press OPEN to open the front panel. Disc loading slot appears.
Disc loading slot
# To avoid a malfunction, make sure that no metal object comes into contact with the terminals when the front panel is open.
! When playing compressed audio, there is no sound on fast forward or reverse. ! Playback is carried out in order of file number. Folders are skipped if they contain no files. (If folder 01 (ROOT) contains no files, playback commences with folder 02.)
Playing tracks in random order
Random play plays tracks in a random order within the selected repeat range. Refer to Selecting a repeat play range on this page. 1 Press FUNCTION to select RANDOM.
% Press FUNCTION repeatedly to switch between the following functions: REPEAT (repeat play)RANDOM (random play)SCAN (scan play)PAUSE (pause) COMP/BMX (compression and BMX) SEARCH (search method)
# To return to the ordinary display, press BAND.
2 Press a to turn random play on. Tracks will play in a random order.
# To turn random play off, press b.
Scanning folders and tracks
Scan play searches the song within the selected repeat range. Refer to Selecting a repeat play range on this page. 1 Press FUNCTION to select SCAN.
Selecting a repeat play range
Repeat play plays the same track/folder within the selected repeat play range. Also, the repeat range determines the range of random play and scan play. Press FUNCTION to select REPEAT. Press c or d to select the repeat range.
2 Press a to turn scan play on. The first 10 seconds of each track is played. 3 When you find the desired track (or folder) press b to turn scan play off.
! DISC Repeat all tracks ! TRACK Repeat just the current track ! FOLDER Repeat the current folder # If you select another folder during repeat play, the repeat play range changes to disc repeat. # When playing CD, performing track search or fast forward/reverse cancels the repeat play automatically. # When playing compressed audio, performing track search or fast forward/reverse during TRACK (track repeat) changes the repeat play range to folder repeat. # When FOLDER (folder repeat) is selected, it is not possible to play back a subfolder of that folder.
Entering disc titles
Use the disc title input feature to store up to 48 CD titles in the unit. Each title can be up to 10 characters long. 1 Play the CD that you want to enter a title for. 2 Press FUNCTION and hold until TITLE IN appears in the display.
# When playing a CD TEXT disc, you cannot switch to disc title input display. The disc title will have already been recorded on a CD TEXT disc.
Displaying text information on disc
% Press DISPLAY to select the desired text information. For title entered CD Play timedisc title and play time
For CD TEXT discs Play timedisc artist name and track title disc artist name and disc titledisc title and track titletrack artist name and track title track title and play time For WMA/MP3/AAC discs Play timefolder name and file nameartist name and track titleartist name and album titlealbum title and track titletrack title and play timecomment and play timebit rate and play time For WAV discs Play timefolder name and file namesampling frequency and play time
Notes ! You can scroll to the left of the title by pressing and holding DISPLAY. ! Audio CD that contains certain information such as text and/or number is CD TEXT. ! If specific information has not been recorded on a disc, title or name is not displayed. ! Depending on the version of iTunes used to write MP3 files onto a disc, comment information may not be correctly displayed. ! Depending on the version of Windows Media Player used to encode WMA files, album names and other text information may not be correctly displayed. ! When playing back VBR (variable bit rate)-recorded WMA files, the average bit rate value is displayed. ! When playing back VBR (variable bit rate)-recorded MP3 files, VBR is displayed instead of bit rate value. ! The sampling frequency shown in the display may be abbreviated. ! When Ever Scroll is set to ON at the initial setting, text information scrolls continuously in the display. Refer to Switching the Ever Scroll on page 22.
Playing songs on iPod
You can use this unit to control an iPod by using a cable (e.g., CD-I200), which is sold separately.
1 Song number indicator 2 RPT indicator Shows when repeat range is selected to ONE. 3 RDM indicator Shows when random play is selected to SHUFFLE SONGS or SHUFFLE ALBUMS. 4 Play time indicator
1 Connect the iPod to this unit. Playback will automatically start. While the iPod is connected to this unit, PIONEER (or (check mark)) is displayed on the iPod.
# Before connecting the dock connector of this unit to the iPod, disconnect the headphones from the iPod. # After the iPod has been connected to this unit, press SOURCE to select the iPod. # When removing the iPod from this unit, this unit is turned off.
2 To perform fast forward or reverse, press and hold c or d. 3 To skip back or forward to another song, press c or d.
Notes ! Read the precautions with iPod on page 33. ! If an error message such as ERROR-11 is displayed, refer to Understanding error messages on page 31. ! Connect directly the dock connector of this unit to the iPod so that this unit works properly.
! When the ignition switch is set to ACC or ON, the iPods battery is charged while the iPod is connected to this unit. ! While the iPod is connected to this unit, the iPod itself cannot be turned on or off. ! The iPod connected to this unit is turned off about two minutes after the ignition switch is set to OFF.
Displaying text information on iPod
% Press DISPLAY to select the desired text information. Play timeartist name and song titleartist name and album namealbum name and song titlesong title and play time
# If the characters recorded on the iPod are not compatible with this unit, those characters will not be displayed. Notes ! You can scroll to the left the text information by pressing and holding DISPLAY. ! When Ever Scroll is set to ON at the initial setting, text information scrolls continuously in the display. Refer to Switching the Ever Scroll on page 22.
Browsing for a song
The operation of this unit to control an iPod is designed to be as close to the operation of the iPod as possible for easy operation and song search. ! If playlist has been selected, first, this unit shows playlist of your iPods name. This playlist plays all songs in your iPod. ! If the characters recorded on the iPod are not compatible with this unit, those characters will not be displayed. 1 Press a or b repeatedly to switch between the following settings: PLAYLISTS (playlists)ARTISTS (artists) ALBUMS (albums)SONGS (songs) GENRES (genres) 2 Press d to determine the category. List from the selected category is displayed. 3 Press a or b to select a song list, album list, artist list or genre list from among the lists. Press a or b repeatedly to switch the lists. 4 Press d to determine the list. Lists from the selected list are displayed. 5 Repeat step 3 and 4 to find a song you want to listen to.
# You can select the SUBWOOFER (subwoofer setting) only when subwoofer output is turned on in SUBWOOFER (subwoofer on/off setting). # When the F.I.E. function is on, you cannot select HP-FILTER. # When the high pass filter is on, you cannot select FIE. # When the rear output setting is REAR SP S/W, you cannot select FIE. # When selecting the FM tuner as the source, you cannot switch to SLA. # To return to the display of each source, press BAND.
Pausing a song
1 Press FUNCTION to select PAUSE. 2 Press a to turn pause on. Playback of the current song pauses.
# If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display.
VOCAL CUSTOM FLAT Vocal Custom Flat Super bass
Using balance adjustment
You can change the fader/balance setting so that it can provide you an ideal listening environment in all occupied seats. 1 Press AUDIO to select FADER.
# If the balance setting has been previously adjusted, BALANCE will be displayed.
2 Press a or b to adjust front/rear speaker balance. FADER FRONT 15 to FADER REAR 15 is displayed as the front/rear speaker balance moves from front to rear.
# FADER 0 is the proper setting when only two speakers are used. # When the rear output setting is REAR SP S/W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 21.
! CUSTOM is an adjusted equalizer curve that you create. If you make adjustments to an equalizer curve, the equalizer curve setting will be memorized in CUSTOM. ! When FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve. % Press EQ to select the equalizer. Press EQ repeatedly to switch between the following equalizers: POWERFULNATURALVOCALCUSTOM FLATSUPERBASS
Adjusting equalizer curves
You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM. 1 Press AUDIO to select EQ.
3 Press c or d to adjust left/right speaker balance. BALANCE LEFT 15 to BALANCE RIGHT 15 is displayed as the left/right speaker balance moves from left to right.
Using the equalizer
The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.
2 Press c or d to select the equalizer band to adjust. EQ-LOW (low)EQ-MID (mid)EQ-HIGH (high) 3 Press a or b to adjust the level of the equalizer band. +6 to 6 is displayed as the level is increased or decreased.
# You can then select another band and adjust the level. Note If you make adjustments, CUSTOM curve is updated.
Recalling equalizer curves
3 Press c or d to select a desired level. LOW (low)MID (mid)HIGH (high)
Using the high pass filter
When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are outputted from the front or rear speakers. 1 Press AUDIO to select HP-FILTER. low-range frequencies. You can select the frequency you want to cut.
Precaution When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not just bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in volume.
2 Press a to turn high pass filter on. HP-FILTER 80 appears in the display. High pass filter is now on.
# If the high pass filter has been previously adjusted, the frequency of that previously selected will be displayed instead of HP-FILTER 80. # To turn high pass filter off, press b.
Press AUDIO to select FIE.
# When the rear output setting is REAR SP S/W, you cannot select FIE.
# To turn F.I.E. off, press b.
Press a to turn F.I.E. on.
3 Press c or d to select cut-off frequency. 506380100125 (Hz) Only frequencies higher than those in the selected range are outputted from the front or rear speakers.
3 Press c or d to select a desired frequency. 100160250 (Hz)
Notes ! After turning the F.I.E. function on, use the balance adjustment (refer to page 17) and adjust front and rear speaker volume levels until they are balanced. ! Turn the F.I.E. function off when using a 2speaker system.
Boosting the bass
Bass boost function boosts the bass level of sound lower than 100 Hz. The more the bass level is increased, the more the bass sound is emphasized and the entire sound becomes powerful. When using this function with the subwoofer, the sound under the cut-off frequency is boosted. 1 Press AUDIO to select BASSBOOSTER.
# You can also select the bass boost setting by pressing and holding SW.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM tuner volume level, which remains unchanged. 1 Compare the FM tuner volume level with the level of the source you wish to adjust. 2 Press AUDIO to select SLA.
2 Press a or b to select a desired level. 0 to +6 is displayed as the level is increased or decreased.
Front image enhancer (F.I.E.)
The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging by cutting mid- and high-range frequency output from the rear speakers, limiting their output to
3 Press a or b to adjust the source volume. +4 to 4 is displayed as the source volume is increased or decreased.
Notes ! The AM tuner volume level can also be adjusted with source level adjustments. ! The built-in CD player and the multi-CD player are set to the same source level adjustment volume automatically. ! External unit 1 and external unit 2 are set to the same source level adjustment volume automatically.
Adjusting initial settings
Using the initial settings, you can customize various system settings to achieve optimal performance from this unit.
1 Function display Shows the function status.
1 Press SOURCE and hold until the unit turns off. 2 Press FUNCTION and hold until function name appears in the display. 3 Press FUNCTION repeatedly to switch between the following settings: CALENDAR (date and clock)FM STEP (FM tuning step)AM STEP (AM tuning step) WARNING TONE (warning tone)AUX1 (auxiliary input1)AUX2 (auxiliary input2) DIMMER (dimmer)S/W CONTROL (rear output and subwoofer controller) DEMONSTRATION (feature demo) EVER-SCROLL (ever scroll) Use the following instructions to operate each particular setting.
# To cancel initial settings, press BAND. # You can also cancel initial settings by holding down FUNCTION until the unit turns off.
Setting the date and clock
Use these instructions to set the clock. 1 Press FUNCTION to select clock.
2 Press c or d to select the segment you wish to set. DayMonthYearHourMinute As you select segments of the clock display the segment selected will blink.
3 Press a or b to set the date and clock. Pressing a will increase the value of the selected segment. Pressing b will decrease the value of the selected segment. 1 Press FUNCTION to select WARNING TONE. 2 Press a or b to turn WARNING TONE on or off.
Setting the FM tuning step
The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz. 1 Press FUNCTION to select FM STEP.
Switching the auxiliary setting
Auxiliary equipments connected to this unit can be activated individually. Set each AUX source to ON when using. About connecting or using auxiliary equipments, refer to Using the AUX source on page 23. 1 Press FUNCTION to select AUX1/AUX2.
2 Press c or d to select the FM tuning step. Press c to select 50 (50 kHz). Press d to select 100 (100 kHz).
Note If seek tuning is performed in 50 kHz steps, stations may be tuned in imprecisely. Tune in the stations with manual tuning or use seek tuning again.
2 Press a or b to turn AUX1/AUX2 on or off.
Notes ! Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power. ! You can also turn on or off feature demo by pressing 6 while this unit is turned off. For more details, see About the demo mode on page 5.
Operating this unit Other Functions
Turning the clock display on or off
You can turn the clock display on or off. ! Even when the sources and the feature demo are off, the clock display appears on the display. % Press CLOCK to turn the clock display on or off. Each press of CLOCK turns the clock display on or off.
# The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds.
% Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separetely) to connect this unit to auxiliary equipment featuring RCA output. For more details, refer to the IP-BUS-RCA Interconnector owners manual. The allocation of this auxiliary equipment is automatically set to AUX2.
# You can only make this type of connection if the auxiliary equipment has RCA outputs.
Selecting AUX as the source
% Press SOURCE to select AUX (AUX1 or AUX2) as the source.
# If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switching the auxiliary setting on page 21.
Using the AUX source
This unit can control up to two auxiliary equipments such as VCR or portable devices (sold separately). When connected, auxiliary equipments are automatically read in as AUX sources and assigned to AUX1 or AUX2. The relationship between AUX1 and AUX2 sources is explained below.
Setting the AUX title
The title displayed for each AUX1 or AUX2 source can be changed. 1 After you have selected AUX as the source, press FUNCTION and hold until TITLE IN appears in the display. 2 Enter a title in the same way as the built-in CD player. For details concerning operation, refer to Entering disc titles on page 13.
About AUX1 and AUX2
You have two methods to connect auxiliary equipments to this unit.
When connecting auxiliary equipment using a stereo mini plug cable % Insert the stereo mini plug into the input jack on this unit. For more details, refer to the installation manual. The allocation of this auxiliary equipment is automatically set to AUX1.
When connecting auxiliary equipment using an IP-BUS-RCA Interconnector (sold separately)
Available accessories Playing songs on USB portable audio player/USB memory
You can use this unit to control a USB adapter, which is sold separately. For details concerning operation, refer to the USB adapters operation manual. This section provides information on USB portable audio player/USB memory operations with this unit which differs from that described in the USB adapters operation manual. ! Optimum performance of this unit may not be obtained depending on the connected USB portable audio player/USB memory.
1 Press SOURCE to select the multi-CD player. 2 Press a or b to select a disc you want to listen to.
# You can also select a disc by using 1 to 6 buttons. ! For discs 1 to 6, press the corresponding button number. ! For discs 7 to 12, press and hold the corresponding numbers, such as 1 for disc 7, until the disc number appears in the display.
3 To perform fast forward or reverse, press and hold c or d. 4 To skip back or forward to another track, press c or d.
Notes ! When the multi-CD player performs the preparatory operations, READY is displayed.
! If an error message such as ERROR-11 is displayed, refer to the multi-CD player owners manual. ! If there are no discs in the multi-CD player magazine, NO DISC is displayed.
Function name Operation Refer to Selecting a repeat play range on page 12. But the repeat play ranges you can select are different from that of the built-in CD player. The repeat play ranges of the multi-CD player are as below: ! MCD Repeat all discs in the multi-CD player ! TRACK Repeat just the current track ! DISC Repeat the current disc Refer to Playing tracks in random order on page 12. Refer to Scanning folders and tracks on page 12. Refer to Using ITS playlists on the next page. Refer to Pausing disc playback on page 12. Refer to Using compression and BMX on page 12. Multi-CD player has DBE (dynamic bass emphasis) function instead of BMX. The settings can be switched as below: OFFCOMP 1COMP 2OFF DBE 1DBE 2 Refer to Using disc title functions on page 28. Refer to Using ITS playlists on the next page.
You can use COMP/DBE (compression and DBE) only with a multi-CD player that supports them.
Function mode 1
% Press FUNCTION repeatedly to switch between the following functions: REPEAT (repeat play)RANDOM (random play)SCAN (scan play)ITS-PLAY (ITS play) PAUSE (pause)COMP/DBE (compression and DBE)
SCAN ITS-PLAY PAUSE
Function mode 2
% Press FUNCTION and hold repeatedly to switch between the following functions: TITLE IN (disc title input)ITS (ITS programming)
# To return to the playback display, press BAND.
TITLE IN ITS
REPEAT, RANDOM, SCAN, PAUSE, COMP/DBE and TITLE IN operations are basically the same as that of the built-in CD player.
Notes ! If you select other discs during repeat play, the repeat play range changes to MCD. ! If you perform track search or fast forward/reverse during TRACK, the repeat play range changes to DISC. ! After track or disc scanning is finished, normal playback of the tracks will begin again. ! When playing a CD TEXT disc on a CD TEXT compatible multi-CD player, you cannot switch to TITLE IN. The disc title has already been recorded on a CD TEXT disc.
Using ITS playlists
ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi-CD player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selections. 1 Select the repeat range. Refer to Playing tracks in random order on page 12. 2 Press FUNCTION to select ITS-PLAY.
Creating a playlist with ITS programming
You can use ITS to enter and play back up to 99 tracks per disc from up to 100 discs (with the disc titles). (With multi-CD players sold before the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.) 1 Play a CD that you want to program. Press a or b to select the CD. 2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS. 3 Select the desired track by pressing c or d. 4 Press a to store the currently playing track in the playlist. ITS IN is displayed briefly and the currently playing selection is added to your playlist. The display then shows ITS again. 5 Press BAND to return to the playback display.
Note After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest one.
3 Press a to turn ITS play on. ITSP appears in the display. Playback begins of those tracks from your playlist within the previously selected MCD or DISC ranges.
# If no tracks in the current range are programmed for ITS play, then ITS-PLAY EMPTY is displayed. # To turn ITS play off, press b.
Erasing a track from your ITS playlist
You can delete a track from your ITS playlist if ITS play is on. If ITS play is already on, skip to step 2. If ITS play is not already on, press FUNCTION. 1 Play the CD with the track you want to delete from your ITS playlist, and turn ITS play on. Refer to Playback from your ITS playlist on this page. 2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS. 3 Select the desired track by pressing c or d. 4 Press b to erase the track from your ITS playlist. The currently playing selection is erased from your ITS playlist and playback of the next track from your ITS playlist begins.
# If there are no tracks from your playlist in the current range, ITS-PLAY EMPTY is displayed and normal play resumes.
Playback from your ITS playlist
ITS play lets you listen to the tracks that you have entered into your ITS playlist. When you turn on ITS play, tracks from your ITS playlist in the multi-CD player will begin to play.
5 Press BAND to return to the playback display.
Erasing a CD from your ITS playlist
You can delete all tracks of a CD from your ITS playlist if ITS play is off. 1 Play the CD that you want to delete. Press a or b to select the CD. 2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS. 3 Press b to erase all tracks on the currently playing CD from your ITS playlist. All tracks on the currently playing CD are erased from your playlist and ITS CLEAR is displayed. 4 Press BAND to return to the playback display.
Using CD TEXT functions
You can use these functions only with a CD TEXT compatible multi-CD player. The operation is the same as that of the builtin CD player. Refer to Displaying text information on disc on page 13.
You can input CD titles and display the titles. Then you can easily search for and play a desired disc.
Use the disc title input feature to store up to 100 CD titles (with ITS playlist) into the multiCD player. Each title can be up to 10 characters long. For details concerning operation, refer to Entering disc titles on page 13. ! Titles remain in memory, even after the disc has been removed from the magazine, and are recalled when the disc is reinserted. ! After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest one.
Displaying disc titles
You can display the text information of any disc that has had a disc title entered. The operation is the same as that of the builtin CD player. Refer to Displaying text information on disc on page 13.
Available accessories TV tuner
You can use this unit to control a TV tuner, which is sold separately. For details concerning operation, refer to the TV tuners operation manual. This section provides information on TV operations with this unit which differs from that described in the TV tuners operation manual.
% Press FUNCTION to select BSSM.
# To return to the channel display, press BAND. Note If you do not operate the function within about 30 seconds, the display is automatically returned to the channel display.
HEAT Symptom iPod doesnt operate correctly. Cause Action Cables are incor- Disconnect the rectly connected. cable from iPod. Once iPod main menu is displayed, connect the cable again. Reset the iPod.
The temperature of this unit is outside the normal operating range
Wait until the units temperature returns to within normal operating limits.
Message ERROR-11 Cause Communication failure Action Disconnect the cable from iPod. Once iPod main menu is displayed, connect the cable again. Reset the iPod. Update the iPod version. Reset the iPod. Check if the connection cable for iPod shorted out (e.g., not caught in metal objects). After checking, switch the ignition key or disconnect the iPod and connect again. Transfer the songs to iPod. Select a list that contains the songs.
Understanding error messages
When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error message.
Built-in CD Player
Message Cause Action Clean disc. Replace disc. Switch the ignition key, or switch to a different source, then back to the CD player.
ERROR-21 ERROR-30 ERROR-A0
Old version of iPod iPod failure iPod is not charged but operates correctly
ERROR-11, 12, Dirty disc 17, 30 ERROR-11, 12, Scratched disc 17, 30 ERROR-10, 11, Electrical or me12, 15, 17, 30, chanical A0
NO SONGS STOP
No songs No songs in the current list
The inserted disc Replace disc. does not contain any data The CD format Replace disc. cannot be played back The inserted disc Replace disc. does not contain any files that can be played back All the files on Replace disc. the inserted disc are secured by DRM The inserted disc Replace disc. contains WMA files that are protected by DRM
Handling guideline of discs and player
! Use only discs featuring either of following two logos.
! Use only conventional, fully circular discs. Do not use shaped discs. standard, it may not be possible to play the CD side with this unit. ! Frequent loading and ejecting of a Dual Disc may result in scratches on the disc. Serious scratches can lead to playback problems on this unit. In some cases, a Dual Disc may become stuck in the disc loading slot and will not eject. To prevent this, we recommend you refrain from using Dual Disc with this unit. ! Please refer to the information from the disc manufacturer for more detailed information about Dual Discs.
Example of a hierarchy
: Folder : Compressed audio file
AAC ! Compatible format: AAC encoded by iTunes version 6.0.5 and earlier ! Sampling frequency: 11.025 kHz to 48 kHz ! Transmission rate: 16 kbps to 320 kbps ! Apple Lossless: No WAV ! Compatible format: Linear PCM (LPCM), MS ADPCM ! Quantization bits: 8 and 16 (LPCM), 4 (MS ADPCM) ! Sampling frequency: 16 kHz to 48 kHz (LPCM), 22.05 kHz to 44.1 kHz (MS ADPCM)
! This unit assigns folder numbers. The user cannot assign folder numbers. ! Folder hierarchy is allowed up to eight tiers. However, practical hierarchy of folder is less than two tiers. ! Up to 99 folders on a disc can be played back.
About handling the iPod
! Pioneer accepts no responsibility for data lost on the iPod even if that data is lost while using this unit. ! Do not leave the iPod in direct sunlight for extended amounts of time. Extended exposure to direct sunlight can result in iPod malfunction due to the resulting high temperature. ! Do not leave the iPod in any location with a high temperature. ! Firmly secure the iPod when driving. Do not let the iPod fall onto the floor, where it may become jammed under the brake or accelerator pedal.
Compressed audio compatibility
WMA ! Compatible format: WMA encoded by Windows Media Player Ver. 7, 7.1, 8, 9 or 10 ! Bit rate: 48 kbps to 320 kbps (CBR), 48 kbps to 384 kbps (VBR) ! Sampling frequency: 32 kHz to 48 kHz ! Windows Media Audio 9 Professional, Lossless, Voice: No MP3 ! Bit rate: 8 kbps to 320 kbps ! Sampling frequency: 16 kHz to 48 kHz (32, 44.1, 48 kHz for emphasis) ! Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3, 2.4 (ID3 tag Version 2.x is given priority than Version 1.x.) ! M3u playlist: No ! MP3i (MP3 interactive), mp3 PRO: No
For details, refer to the iPods manuals.
About iPod settings
! You cannot operate the iPod Equalizer on the Pioneer products. We recommend that you set the iPod Equalizer to off, before connecting the iPod to this unit. ! You cannot set Repeat to off on the iPod when using this unit. Even if you set Repeat to off on the iPod, Repeat is changed to All automatically when connecting the iPod to this unit.
Additional Information Specifications
Rated power source.. 14.4 V DC (allowable voltage range: 12.0 V to 14.4 V DC) Grounding system. Negative type Max. current consumption... 10.0 A Dimensions (W H D): DIN Chassis. 162 mm Nose.. 15 mm D Chassis. 162 mm Nose.. 15 mm Weight.. 1.5 kg Subwoofer (mono): Frequency. 50/63/80/100/125 Hz Slope. 18 dB/oct Gain.. +6 dB to 24 dB Phase.. Normal/Reverse Bass boost: Gain.. +12 dB to 0 dB
System.. Compact disc audio system Usable discs.. Compact disc Signal format: Sampling frequency.. 44.1 kHz Number of quantization bits.. 16; linear Frequency characteristics. 5 Hz to Hz (1 dB) Signal-to-noise ratio.. 94 dB (1 kHz) (IEC-A network) Dynamic range.. 92 dB (1 kHz) Number of channels. 2 (stereo) MP3 decoding format. MPEG-1 & 2 Audio Layer 3 WMA decoding format. Ver. 7, 7.1, 8, 9, 10 (2ch audio) (Windows Media Player) AAC decoding format. MPEG-4 AAC (iTunes encoded only) WAV signal format. Linear PCM & MS ADPCM
For more information, call or write to:
http://pioneer.jp http://www.pioneer.com.sg http://www.pioneer-uae.com
Published by Pioneer Corporation. Copyright 2007 by Pioneer Corporation. All rights reserved. Specifications and design may be subject to modification without notice. Product colors and illumination may differ in photographs from actual appearance, due to effects of printing and photography. Code No.: 8120F Name: 07 CE PREVIEW (E-Green) ADKI 11-06 Printed in Japan.
WM A / M P3 Pl aye r s
USB Direct Connection
Complete your connection to the heights of ecstasy. Pioneer car entertainment now hooks up more directly with a great variety of high-capacity portable digital players. Access, control and high-resolution playback are supremely fast, simple and straightforward. The integrity of pure technology and advanced engineering keeps every sound pristine. So drive beyond conventional values. Arrive at a higher class of performance. Expand the horizons of entertainment at your command. Go with a winner: Pioneer. Paving the way to rock your world as never before.
A type (m) Mini-B (m)
Simply plug in USB-compatible equipment (such as an iPod nano, iPod, or another portable digital player or USB memory device) into the rear USB connector of the DEH-P7950UB head unit. This direct, high-speed, adapterfree connection plus built-in 24-bit Delta Sigma D/A Converter (to improve DAC) assure extraordinary sound quality as well as optimal convenience.
S i n g l e - C D P l ay e r
Connection Example for USB Devices
Portable media players original cable
D E H - P 0 U B
0.2 m (pigtail) 1.5 m CD-IU50* Pioneer Optional USB Cable
Portable media player
O D R Sy s t e m s
A type (f) A type (m) Extended cable (1.5 m) included.
A type (f)
A type (m)
USB connector-male (m) USB connector-female (f)
USB memory device
* CD-IU50 USB cable optionally available for connecting an iPod nano or iPod to the DEH-P7950UB. NOTE: An iPod adapter (CD-IB100II), sold separately, is needed to connect the DEH-P7950UB to an iPod preceding the current fifth-generation iPod.
Po w e r A m p l i f i e r s
Connect an iPod nano or iPod directly to the head unit (DEH-P7950UB/DEH-P6950IB/ DEH-P5950IB), and gain full direct control of the portable digital file player via the head unit interface that is as quick and easy as manipulating the iPod itself. For extra convenience, the DEH-P7950UB lets you control menus (including all the latest shuffle functions) and songs, as well as podcasts and audiobook chapters stored in the iPod directly through the head unit front interface.
NOTES: iPod is for legal or rightholder-authorized copying only. Dont steal music. iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Depending on the Pioneer head unit installed, some functions may be limited using iPod adapter.
Subwoofers S p e a ke r s
Its easy to add to your Pioneer car entertainment system. Each of Pioneers latest head units has a built-in AUX-in (front or rear) for connection to digital audio players and other external devices.
4-Channel High-Power WMA/MP3/AAC/CD Receiver
With capability to play MP3, WMA (Windows Media Audio), iTunes AAC (Advanced Audio Coding), WAV digital audio files recorded onto various devices and media (USB memory, iPod, portable media player, CD-R/RW), Pioneer car entertainment systems accommodate the most universally accepted digital compression encoding standards.
Pure blue dot-matrix OEL (Organic EL) display iPod adapter ready USB 2.0 (full speed) BMX (Bitmetric Equalizer) 24-bit Delta Sigma D/A Converter (USB) EEQ 7-band digital graphic equalizer Auto-slide face Rotary Commander Direct Sub Drive 3 RCA pre-outs (front + rear + subwoofer) AUX-in (rear) Level indicator Spectrum analyzer Multi-language display (English/Spanish/Portuguese) 2
* MP3/WMA: Compatible with all models except DEH-1950G. AAC: Compatible with all models except DEH-P3950MP, DEH-2950MP and DEH-1950G. NOTES: Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. iTunes is a trademark of Apple Computers Inc., registered in the U.S. and other countries. AAC players can decode only those AAC files ripped and encoded using iTunes.
Optionally available for connecting an iPod nano or iPod to the DEH-P7950UB.
WM A / M P3 Pl aye r s WM A / M P3 Pl aye r s
iPod direct control USB adapter ready Pure blue dot-matrix OEL (Organic EL) display BMX (Bitmetric Equalizer) EEQ 7-band graphic equalizer Rotary Commander
Direct Sub Drive 3 RCA pre-outs (front + rear + subwoofer) AUX-in (rear) Spectrum analyzer Multi-language display (English/Spanish/Portuguese) Flap face
iPod direct control USB adapter ready Segmented OEL display BMX (Bitmetric Equalizer) EEQ 3-band parametric equalizer
Rotary volume Direct Sub Drive 3 RCA pre-outs (front + rear + subwoofer) AUX-in (rear) Flap face
IP-Bus USB Adapter
Interface Cable for iPod
Optionally available for connecting iPod nano or iPod to the DEH-P6950IB or DEH-P5950IB. 5
USB adapter ready iPod adapter ready BMX (Bitmetric Equalizer) EEQ 3-band parametric equalizer Rotary volume Direct Sub Drive 3 RCA pre-outs (front + rear + subwoofer) AUX-in (rear)
4-Channel High-Power WMA/MP3/CD Receiver
BMX (Bitmetric Equalizer) Rotary volume 1 RCA pre-out (rear) AUX-in (front)
S i n g l e - C D P l ay e r O D R Sy s t e m s
USB adapter ready iPod adapter ready BMX (Bitmetric Equalizer) EEQ 3-band parametric equalizer Rotary volume Direct Sub Drive 2 RCA pre-outs: selectable (front + rear/front + subwoofer) AUX-in (front)
4-Channel High-Power CD Receiver
Rotary volume 1 RCA pre-out (rear) AUX-in (front)
EEQ (Easy Equalizer)
Sound shaping is at your command. You can adjust the sound according to in-car acoustic characteristics and the music you listen to. 5-Mode Preset Equalizer You can switch among five preset equalization curves* (Super Bass/ Powerful/Natural/Vocal/Flat) simply by pushing an EQ button. Each of these settings boosts bass and high-frequency ranges in ways that suit the music best.
* Dynamic/Powerful/Natural/Vocal/Flat in the DEH-2950MP and DEH-1950G.
of sound-shaping dimensions/combinations exactly as you like. This mode can memorize adjusted preset curves by 3-band parametric equalizer* settings for each source.
* Bass/mid/treble equalizer for DEH-2950MP and DEH-1950G.
Each of Pioneers latest head units has a built-in AUX input for connecting a digital portable player and other external auxiliary devices. For extra-convenient access, the DEH-P3950MP, DEH-2950MP and DEH-1950G have this input on the front panel.
Built-in 50 W 4-Channel High-Power MOSFET Amplifier
To minimize voltage loss in its head unit amplifiers, Pioneer built in high-performance Power MOSFET integrated circuitry that processes signals efficiently at 50 W 4 maximum total output. High-speed MOSFET switching reduces distortion to virtually nothing at high frequency ranges, thanks to superior characteristics of linearity that smooth the signal transmission path from input to output. Pioneers independent routing of input and output current is essential to obliterating distortion. High power of 50 W per channel and characteristics of the bonding wire ensure excellent sound quality. The 99.99% pure OFC (oxygenfree copper) bonding wire has low electrical resistance, so minimal electric power is lost as heat in the IC chip, enhancing power handling efficiency as well as sound quality.
2-Mode Custom Preset Equalizer Create and memorize your favorite equalization curves from an amazing variety of sound-shaping dimensions and combinations, just as you like. Custom-1 mode can memorize adjusted preset curves using 7-band digital equalizer settings for each source (Source EQ memory). Custom-2 mode can register your favorite custom curve (based on Flat mode* curve) for all sources using the 7-band digital equalizer.
* Flat mode also remains after customizing equalization curve.
1-Mode Custom Preset Equalizer Pioneers head units feature a 1-mode custom preset equalizer for creating your favorite sound curve from an amazing variety
5-mode preset equalizer Custom preset equalizer <2 = 2-mode, 1 = 1-mode> 7-band digital graphic equalizer 3-band parametric equalizer 2-way crossover: HPF/LPF Bass Boost Selectable loudness <3 = 3-mode, 2 = 2-mode> Selectable FIE (Front Image Enhancer) DEH-P7950UB 2 3 DEH-P6950IB 2 3
2-Way Crossover (HPF/LPF) Our most feature-loaded models allow extra EEQ flexibility with selectable HPF (High Pass Filter) and LPF (Low Pass Filter). Head units of these systems can perform as amplifiers or separate crossover units for easier system control, particularly of low-frequency signals. 3-Mode Selectable Loudness Select among three levels (high/mid/low) to instantly boost volume when driving noise overpowers in-car sound. 2-Mode Selectable Loudness Select high or low volume boost level when extraneous noise drowns out your sound system. Selectable FIE (Front Image Enhancer) Enhance front sound imaging without sacrificing rear speaker bass. You can choose among three effect settings.
DEH-P5950IB 1 3 DEH-P4950MP 1 3 DEH-P3950MP 1 3 DEH-2950MP 1 2 DEH-1950G 1 2
BMX (Bitmetric Equalizer)*
Audio compression formats such as MP3 and WMA tend to lose high-frequency sound levels, especially in passages when recorded signal input is weak. Pioneers BMX (Bitmetric Equalizer) compensates for this by boosting playback of upper frequency sound, to the benefit of overall musical balance. BMX1: Recommended for enhancing brightness and depth of sound and sense of ambient space. BMX2: Recommended for even richer sound (more volume in the low and middle range) than BMX1 offers.
* Compatible with all models except DEH-1950G.
Power MOSFET high-power IC chip
O D R ( O p t i c a l D i g i t a l R e f e r e n ce ) Sy s t e m s WM A / M P3 Pl aye r s
M A K I N G A N A U D I O R E F E R E N C E R A D I C A L LY S U P E R I O R
A standard for perfect car audio has existed only as an ideal. Until now. To express a purer conception of audio fidelity, Pioneer ODR (Optical Digital Reference) technology processes signals so that sound quality and sound stage are uncompromised by driving and cabin environment. The result is a car entertainment experience that immerses listeners completely in sound of distinctive character, detail and dynamics, as if it is coming fresh from the original source.
Head Units Feature Comparison
WMA/MP3 Players DEH-P7950UB DEH-P6950IB DEH-P5950IB DEH-P4950MP DEH-P3950MP DEH-2950MP MULTI-CD CONTROL Scan (disc/track) CD pause Repeat <M = Magazine, D = Disc, T = Track, I = ITS> M/D/T/I D/T/I D/T/I M/D/T/I M/D/T/I Random play <M = Magazine, D = Disc, I = ITS> M/D/I M/D/I M/D/I M/D/I M/D/I Disc title memory (100 titles) CD Text(1) List search <D = Disc, T = Track> D/T D/T D/T Digital compression (2) Dynamic bass emphasis (2) ITS (Instant Track Selection) CD PLAYER CD-R/RW playback WMA (Windows Media Audio) playback with WMA Tag MP3 playback with ID3 Tag iTunes AAC playback WAV file playback Folder/file list search (CD-ROM) 1-bit D/A Converters with 8 oversampling digital filter Digital direct Track scan CD pause Track/manual search Repeat (CD-DA: disc/track, CD-ROM: file/folder) <C = CD-DA only> Random play <D = Disc> D D D D D D Disc title memory (48 titles) CD Text List search Digital compression BMX (Bitmetric Equalizer) TUNER Supertuner <IIID = SupertunerIIID, III = Supertuner III> IIID IIID IIID IIID IIID IIID BSM (Best Stations Memory) Local seek tuning 24-station (18 FM/6 AM) presets 9 k/10 kHz AM channel spacing switch <9 = 9 kHz only> AUDIO High precision sound master clock circuitry Hi-bit conversion MOSFET 50 W 4 (max.) Gold-plated 8-channel RCA output (high/mid/low/subwoofer) 3 RCA pre-outs Front + Rear + Subwoofer Front + Rear/Front + Subwoofer (selectable) 2 RCA pre-outs RCA pre-out Rear High-voltage pre-out (V) IP-Bus input/output Optical input/output Optical input (with RS-D7RII) Frequency change: 9644.1 kHz Built-in DSP (Digital Signal Processor) Advanced Segment 24-bit D/A Converter High-performance 32-bit floating binary point type DSP 5-mode equalizer <P = Preset> P P P P P P Digital listening position selector Time Alignment 31-band L/R independent equalizer 3-band parametric equalizer <L/R = L/R independent> Parametric bass/treble control 4-way independent L/R crossover network (high/mid/low/subwoofer) Direct Sub Drive Subwoofer control Fader Electronic volume/balance controls Tone control <B = Bass, M = Mid, T = Treble> B/M/T SLA (Source level adjuster) Spectrum analyzer Level indicator Cellular mute GENERAL Rotary Commander <RM = Rotary commander + Rotary volume, V = Rotary volume> RM RM V V V V Wireless remote controller <10 = 10-key direct access remote, C = Card> C C C C Face type <A = Auto-slide, F = Flap, P = Pop-up> A F F P P P Detachable Face Security Clock <E = Entertainment> E E Dot-matrix OEL (Organic EL) display <PB = Pure, W = White> PB PB Segmented OEL (Organic EL) display LCD display <MC = Multi-color, W = White> MC W W Dual LED for button illumination (white or red selectable) Adjustment <B = Brightness, C = Contrast> B B System control terminal Multi-language display (English/Spanish/Portuguese) Source CD control (External unit control) Source TV control (analog tuner control) Source DVD control <E = External unit control> E E E E USB direct iPod direct connection iPod adapter ready <E = External unit control> E E E E USB adapter ready <E = External unit control> IP-Bus Bluetooth adapter ready <E = External unit control> E E External unit control via IP-Bus 2 AUX-in (with optional CD-RB10 and CD-RB20) <20 = CD-RB20 only> Direct AUX-in <F = Front, R = Rear> R R R R F F Display off Gold-plated screw-type power/ground terminals One-sided terminals and square aluminum bonnet OFC power/ground cable included (1) Requires use of CD text-ready Multi-CD player. (2) Requires use of digital compression and dynamic bass emphasis-ready Multi-CD player. * Component Single-CD Player ** Component Add-On DSP Unit
Single-CD Player DEH-1950G
ODR Systems RS-D7RII* M/D/T/I RS-P90**
Component CD Receiver
High precision sound master clock circuitry Hi-quality CD drive Hi-bit conversion Digital direct Frequency change: 9644.1 kHz Source DVD control Digital optical input/output IP-Bus input/output External unit control via IP-Bus (2 units)
AUX-in (with optional CD-RB20) White dot-matrix OEL (Organic EL) display Auto-slide face Rotary volume (High quality feel is enhanced by using aluminum for the volume and cross key while adding spinning graved finish on it) Use of dual LED for button illumination (White or red selectable) Display off mode OFC power/ground cable
High-Precision Sound Master Clock Circuitry
The latest integrated circuits require superior clock signal quality to handle digital data accurately without distortion at ever-higher speeds. Dual independent Sound Master Clock Circuitry in the RS-D7RII generates clock waveforms to read and process digital signals with ultra-precision, and eliminate jitter noise in transmission. The result: extraordinarily clear, pure sound.
Clock circuit board
V A W
S p e a ke r s
W C 20
Universal Digital Pre-Amplifier
Advanced Segment 24-bit D/A Converter Digital listening position selector Time Alignment Parametric bass/treble control 31-band L/R independent graphic equalizer (1/3 oct.) with level control (12 dB/0.5 dB steps) 3-band L/R independent parametric equalizer (1/3 oct.) with level control (12 dB/0.5 dB steps) 4-way independent L/R crossover network (high/mid/low/subwoofer) Crossover frequency: 2020,000 Hz (1/3 oct.)
Crossover slope: 0 dB to 72 dB Crossover presets: 5 Gold-plated 8-channel RCA output (high/mid/low/subwoofer) Gold-plated screw-type power/ground terminals The one-sided terminals and the square aluminum bonnet that rotates by every 90 degrees considered for installation High-performance 32-bit floating binary point type DSP
Head Units Specifications
DEH-P7950UB CD PLAYER Frequency response [1dB] S/N ratio [1kHz, IEC-A Network] Dynamic range [1 kHz] TUNER Frequency range Hz dB dB MHz kHz kHz dBf dB V Hz dB % Hz dB 520,92 87.5108 5301,640 5311,[0.7 V] 50 W 4 mm mm mm mm DEH-P6950IB 520,92 87.5108 5301,640 5311,[0.7 V] 50 W 15 DEH-P5950IB 520,92 87.5108 5301,640 5311,[0.7 V] 50 W 15 DEH-P4950MP 520,92 87.5108 5301,640 5311,[0.7 V] 50 W 14 DEH-P3950MP 520,92 87.5108 5301,640 5311,[0.7 V] 50 W 14 DEH-2950MP 520,92 87.5108 5301,640 5311,[0.7 V] 50 W 170 47.DEH-1950G 520,92 87.5108 5301,640 5311,[0.7 V] 50 W 170 47.RS-D7RII* 520,87.5108 5311,[0.8 V] RS-P90** 2020,0.002 1020,220 4.0 V/1 kHz, 1% dist. 240
High-Performance SHARC Digital Signal Processors
For remarkably precise 32-bit sound processing, the circuitry of the RS-P90 is mounted with three high-performance Analog Devices SHARC DSPs, for left-channel, right-channel and coefficient calculation.
High-performance SHARC DSP 3
FM AM [10 kHz] [9 kHz] FM usable sensitivity [75 , mono, S/N: 30 dB] FM stereo separation [65 dBf, 1kHz] AM usable sensitivity [S/N: 20 dB] COMPONENT ADD-ON DSP UNIT Equalization frequency Equalization range Distortion [1 kHz, 500 mV, 20 KLPF] Frequency response [1 dB] S/N ratio [IEC-A network] Output impedance Max. output level AUDIO Max. power output GENERAL Dimensions [W H D] DINChassis Nose DChassis Nose * Component Single-CD Player ** Component Add-On DSP Unit
Po w e r A m p l i f i e r s WM A / M P3 Pl aye r s
E M P O W E R M O R E E N T E R TA I N M E N T
Youve got the passion. Now, go for the power. Pioneer amplifiers push speakers and subwoofers to the outer limits of performance, from the deep, solid low-frequency foundation to the brilliant high-frequency summit of your car sound spectrum. Renowned engineering maintains smooth efficiency throughout the circuitrys signal path. Ultimately, the rush is enormous.
60 W 4 (4 )/150 W 2 (4 )/75 W 4 (2 ) (continuous power) 120 W 4 (4 )/300 W 2 (4 ) (max. power)
4-Channel Bridgeable Power Amplifier
400 W MAX.
600 W MAX.
40 W 4 (4 )/100 W 2 (4 )/50 W 4 (2 ) (continuous power) 80 W 4 (4 )/200 W 2 (4 ) (max. power)
Common Features Bridgeable 2/3/4-channel capability LPF/HPF (80 Hz, 12 dB/oct.) for A and B channels High-voltage input level control (400 mV6.5 V) Input level/gain control Low load impedance capability (28 ohm) RCA input and output terminals* Screw-type speaker terminals Large screw-type power/ground terminals Speaker level input (1.6 V26 V) PWM regulated power supply with MOSFET switching High-performance balanced isolator circuit Black heatsink with aluminum plate
Speaker line input turn-on sensor Bass Boost Remote (50 Hz, 0/+6/+9/+12 dB) High-performance balanced isolator input circuit High-efficiency MOSFET output section Aluminum die-cast heatsink
250 W 1 (4 )/360 W 1 (2 ) (continuous power) 500 W 1 (4 )/800 W 1 (2 ) (max. power) Variable LPF (40240 Hz, 12 dB/oct.) High-voltage input level control (400 mV6.5 V) Input level/gain control Low load impedance capability (28 ohm) RCA input terminals
Screw-type speaker terminals Large screw-type power/ground terminals Speaker level input (1.6 V26 V) Bass Boost (50 Hz, 0/+6/+12 dB) PWM regulated power supply with MOSFET switching High-performance balanced isolator circuit Black heatsink with aluminum plate
Caution: To avoid damaging your amplifier/subwoofer system, please make sure that the continuous power output of the amplifier is lower than the nominal power handling of the subwoofer.
2-Channel Amplifier Connection Examples
4-Channel Amplifier Connection Examples
Bridged Stereo 3-Channel Mode Bridged
Bridged TS-W307D2 connection L R L R Stereo Stereo GM-6300F Bridged connection TS-W307D2 Subwoofer GM-6300F Bridged connection TS-W307D2 Full-range speakers
2-preout head unit Front A-ch. Rear B-ch. Nonfading RCA output RCA input GM-6300F
Bridged mono Subwoofer
Bridged Mono 4
Stereo Subwoofer GM-5300T TS-W307DGM-5300T TS-W3004SPL TS-W307D4 4
6" 9" speakers LPF Bridged connection GM-5300T TS-W307D2
Pioneer brings together its cutting-edge Class-D circuitry and ICEpower digital amplifier technology to create Class-FD (Full Range Class-D) ICEpower amplifiers that deliver superior performance and sound quality in car entertainment. Combining the unsurpassed efficiency of Class-D amps with the ultra-clean sound of Class-AB amplifiers, COM (Controlled Oscillation Modulation) technology not only eliminates
Audio Quality Class-A Class-AB
response, improving this response as this system receives analog signals from the output filter . The result is truer fidelity featuring tight bass with minimal lag effect; crisp, airy mids and highs; and unsurpassed specifications contributing to qualities that outperform those of other premium-quality amplifiers.
Double loop compensation
Power Amplifier Features
Bridgeable 2/3/4-channel capability <F = Class-FD> Bridgeable 1/2/3-channel capability <F = Class-FD> Mono amplifier <D = Class-D> Variable LPF/HPF (40500 Hz, 12 dB/oct.) Variable LPF (40240 Hz, 18 dB/oct.) Variable LPF (40240 Hz, 12 dB/oct.) LPF/HPF (80 Hz, 12 dB/oct.) for A and B channels LPF (80 Hz, 12 dB/oct.) Input level control (400 mV6.5 V) Input level/gain control Low load impedance capability (4 ohm, 28 ohm allowable) Low load impedance capability (18 ohm) RCA input and output terminals <G = Gold-plated> RCA input terminals <G = Gold-plated> Screw-type speaker terminals <G = Gold-plated> Large screw-type power/ground terminals <G = Gold-plated> Speaker level input (1.6 V26 V) Speaker line input turn-on sensor Bass Boost (50 Hz, 0/+6/+9/+12 dB) <R = Remote> Subsonic filter (20 Hz, 18 dB/oct.) SYNC control PWM regulated power supply with MOSFET switching High-performance balanced isolator circuit High-efficiency MOSFET output section MASS (Multiple Amplifier Synchronization System) All terminals placed on one side Removable terminal/settings cover Black heatsink with aluminum plate Aluminum die-cast heatsink PRS-D4100F F PRS-D2100T F(1) D G G G G G G R G G G R (4) (2) (2) (3) PRS-D1100M GM-6300F GM-4300F GM-5300T GM-3300T GM-7300M (3)
unnecessary sensitivity to imperfect power supplies it compares the amplified PWM (Pulse Width Modulation) signal with the original input signal , compensating for any variance and lowering distortion in the process. MECC (Multivariable Enhanced Cascade Control) compensating for load-dependent frequency
Amplified PWM signal
Single loop compensation
Class-D Mono Amplifier
Normal mode: 400 W 1 (4 )/600 W 1 (2 ) (continuous power) Hi-current mode: 150 W 1 (4 )/300 W 1 (2 )/600 W 1 (1 ) (continuous power) 800 W 1 (4 )/1,200 W 1 (1 , 2 ) (max. power) Variable LPF (40240 Hz, 18 dB/oct.) Input level control (400 mV6.5 V) Low load impedance capability (18 ohm)
Subwoofers WM A / M P3 Pl aye r s
EXPLORE DEEPER DIMENSIONS
How low can higher technology go? To find out, Team Pioneer breaks away from convention to create subwoofers that play to win at International Auto Sound Challenge Association and United States Autosound Competition International showdowns. Indeed, the TS-W5102SPL beat the pack at the 2006 IASCA IdBL World Finals, becoming the worlds first subwoofer able to go beyond the 180 dB Sound Pressure Level threshold. Such technology inherits Pioneers extraordinarily precise and consistent sound staging innovation, giving Pioneer subwoofers the power to reproduce clear bass with awesome punch at levels loud enough to rock your world.
Free-Air Type Subwoofers
30-cm (12") Component Subwoofer (Free-Air Type)
900 W MAX. Spoke grille compatible (UD-G307) 48-mm (2") aluminum voice coil former 300 watts nominal power handling 20 to 1,500 Hz, 94 dB, mm
25-cm (10") Component Subwoofer (Free-Air Type)
700 W MAX. Spoke grille compatible (UD-G257) 40-mm (1-1/2") aluminum voice coil former 250 watts nominal power handling 20 to 2,000 Hz, 92 dB, mm Common Features Composite IMPP cone using interlaced aramid fiber 2-layer, copper round wire long voice coil Single conex damper with damper ring Dual-layer foam urethane surround Large magnet and high-power motor assembly Tall surround and large cone surface Extended excursion design Long voice coil design Extended and vented pole yoke Best tuned parameters
UD-G307/UD-G257 Optional Spoke Grille
Pioneer optional spoke grilles protect cone surface and enhance appearance of the subwoofers.
Spoke grille for the TS-W307D2, TS-W307D4, TS-W257D2, TS-W257D4, TS-W307F and TS-W257F
UD-G307 with TS-W307D2
Integrated Single Sided Silver Binding Posts
Incorporate 2 Dual Voice Coil instead of 4 SVC to expand connective application.
Connection & Wiring (for Dual Voice Coil Type Subwoofers)
1 or 2 or 4 Bridged mono (for 2 subwoofers) 2 or 4 Stereo 1 or 2 or 4 Bridged mono
Cover Wire 4 or or 4 or or or 2 or 4
Dual Voice Coil Type Subwoofers
D2 Type (2 Dual Voice Coil)
8 (D4) 4 (D2)
2 (D4) 1 (D2)
30-cm (12") Component Subwoofer (4 Dual Voice Coil Type)
30-cm (12") Component Subwoofer (2 Dual Voice Coil Type)
Single large conex damper Silver painted basket
25-cm (10") Component Subwoofer (4 Dual Voice Coil Type)
1000 W MAX.
Dual voice coil (DVC) Common Features Composite IMPP cone using interlaced aramid fiber 3-layer, fiber woven radial surround Single large conex damper with damper ring Dual 4-layer, long voice coils (DVC) (: TS-W257D2/: TS-W257D4) 48-mm (2") phenol coated glass cloth voice coil former for higher power handling capabilities Double stack high power magnets (2.1 kg/74 oz.) Extended and vented pole yoke Integrated single side silver binding posts Spoke grille compatible (UD-G257) 350 watts nominal power handling 18 to 600 Hz, 87 dB, 22.64 l (0.8 cu. ft.), mm Single sided push terminals Double stacked magnets
25-cm (10") Component Subwoofer (2 Dual Voice Coil Type)
Magnet cover Extended and vented pole yoke
Size TS-W307D2 TS-W307D4 TS-W257D2 TS-W257D4 TS-W307F TS-W257F 30 cm 30 cm 25 cm 25 cm 30 cm 25 cm Max. Input 1,200 W 1,200 W 1,000 W 1,000 W 900 W 700 W Nominal Input 400 W 400 W 350 W 350 W 300 W 250 W
Frequency Response 18500 Hz 18500 Hz 18600 Hz 18600 Hz 201,500 Hz 202,000 Hz
Sensitivity 89 dB 89 dB 87 dB 87 dB 94 dB 92 dB
Impedance 2 DVC 4 DVC 2 DVC 4 DVC 4 4
Dimensions (W H D) mm mm mm mm mm mm
Glass imide voice coil
Damper for excursion control
Size TS-A6992S TS-A6982S TS-A6972E TS-A6962E TS-A1682S TS-A1672S TS-A4672R 6" 9" 6" 9" 6" 9" 6" 9" 16 cm 16 cm 4" 6" Max. Input 460 W 440 W 400 W 300 W 280 W 220 W 150 W Nominal Input 80 W 80 W 80 W 40 W 50 W 35 W 20 W Frequency Response 2535,000 Hz 2533,000 Hz 2530,000 Hz 2828,000 Hz 3033,000 Hz 3033,000 Hz 4530,000 Hz Sensitivity 93 dB 93 dB 93 dB 93 dB 91 dB 90 dB 90 dB Impedance 4 Dimensions (W H D) 110 mm 109 mm 107 mm 93.5 mm mm mm 63 mm Mounting Depth 87 mm 85 mm 86 mm 72 mm 57 mm 44 mm 45 mm Cut-Out Dimensions mm mm mm mm 128 mm 128 mm mm
EY0225 ICF-CD2000 Acoustimass 20 Review KRF-V8060D Explorer Auraton 2005 GT-S3030 F50777 5460 SG Nroute FOR AA Astra GTC Thinkpad Z60M Hwpg1 DP380F TDS360T Seals KDL-55X4500 B1245V Ixus V2 Dvdr70-021 HKW-600 Edition V6 Dvdr1000-001 WR850GP CDJ-02 TC-WR681 KX-TC1743G CX4200 PRO VLA 85 X 21-230 JHV RM-X11M Aekrqpn 750GB USB 5600- Leopard KX-TC1890B P5GC-MX Nawigatorem DTH725 775I65PE E M LX700-22 TL-WN722N Ox66-2000 Drive X163W Easyshare C140 Client 62840 SB2-PRO 119203C EXP7900 ICF-CD815 D-EJ000 C5035I 230 ACX SPH-M900 A7V133-VM TF1040 Cube 300 DR-M100sus-dr-m100 LH-W753TA Gun G15 RX-V660 KDC-M6024G MDX-C6500RV LD-2120SH KX-TDA30CE LE19C350 VR668 Radiance R82 XL-2600 L350D IT962WRD MM-DA25R RV-1000 CQ-TX5500W KX-TVA50 Charger KIT D-NF610 KX-TG1312G Yamaha P80 WF6450N7W SR-282 Tundra C40UX Motorola Q11 Comfort F5 PS42B430 Kodak C643 MC-3089NBC ZOB482N TNT100-120 AVR 445 Aircoustic C6700 SP-20 WF-T1340TP
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101