DV270_ASIA.book 1

DVD Player
DV-270-S DV-373-S DV-373-K

Operating Instructions

DV270_ASIA.book 2

IMPORTANT

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

D3-4-2-1-1_En

[Except Taiwanese model]
CAUTION This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. The following caution label appears on your unit.
WARNING: The apparatus is not waterproofs, to prevent fire or shocks hazard, do not expose this apparatus to rain or moisture and do not put any water source near this apparatus, such as vase, flower pot, cosmetics container and medicine D3-4-2-1-3_En bottle etc.

On the top of the player

WARNING:
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY. The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., 230V D3-4-2-1-4_En or 120V) written on the rear panel.
The STANDBY/ON switch is secondary connected and therefore, does not separate the unit from mains power in STANDBY position. Therefore install the unit suitable places easy to disconnect the MAINS plug in case of the accident. The MAINS plug of unit should be unplugged from the wall socket when left D3-4-2-2-2a_En unused for a long period of time.
WARNING: Slot and openings in the cabinet are
provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, to prevent fire hazard, the openings should never be blocked and covered with items, such as newspapers, table-cloths, curtains, etc. Also do not put the apparatus on the thick carpet, bed, D3-4-2-1-7b_En sofa, or fabric having a thick pile.

Operating Environment

Operating environment temperature and humidity: +5 C +35 C (+41 F +95 F); less than 85 %RH (cooling vents not blocked) Do not install in the following locations Location exposed to direct sunlight or strong artificial light Location exposed to high humidity, or poorly D3-4-2-1-7c_En ventilated location
WARNING: No naked flame sources, such as
lighted candle, should be placed on the apparatus. If naked flame sources accidentally fall down, fire spread over the apparatus then may cause fire.

D3-4-2-1-7a_En

TCUDORP RESAL 1 SSALC

D3-4-2-1-8_En

DV270_ASIA.book 3

[For PX model]

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. D8-10-1-2_En
CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and D8-10-3a_En televisions, use shielded cables and connectors for connections.

Information to User Alteration or modifications carried out without appropriate authorization may invalidate the users right to operate the equipment. D8-10-2_En
CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION : THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.

D6-8-2-1_En

POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement. S002_En
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
When disposing of used batteries, please comply with governmental regulations or environmental public instructions rules that apply in your country/area. D3-4-2-3-1_En
This product includes FontAvenue fonts licenced by NEC corporation. FontAvenue is a registered trademark of NEC Corporation.
For U.S. and Australia Model
This product is for general household purposes. Any failure due to use for other than household purposes (such as long-term use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period. K041_En

C67-7-3_En

DV270_ASIA.book 4

Contents

01 Before you start
Features. 5 Whats in the box. 5 Hints on installation. 6 Disc / content format playback compatibility.. 7 Zooming the screen. 26 Switching camera angles. 27 Displaying disc information. 27
06 Audio Settings and Video Adjust menus

Audio Settings menu. 28 Video Adjust menu. 29

02 Connecting up

Easy connections. 9 Connecting using the S-video output. 10 Connecting using the component video output. 10 Connecting to an AV receiver. 12

07 Initial Settings menu

Using the Initial Settings menu. 30 Digital Audio Out settings. 30 Video Output settings. 31 Language settings. 31 Display settings. 32 Parental Lock. 33

03 Controls and displays

Front panel. 13 Remote control. 14
08 Additional information
Taking care of your player and discs.34 Screen sizes and disc formats. 35 Setting the TV system. 36 Resetting the player. 36 Power reset. 36 DVD-Video regions. 37 Selecting languages using the language code list. 37 Language code list. 38 Country code list. 38 Glossary. 39 Specifications. 40

04 Getting started

Switching on. Using the on-screen displays. Setting up the player for your TV. Setting the language of this players on-screen displays. Playing discs. 26 26

05 Playing discs

Scanning discs. Playing in slow motion. Frame advance/frame reverse. Viewing a JPEG slideshow. Browsing video content with the Disc Navigator. Browsing WMA, MP3 and JPEG files with the Disc Navigator. Looping a section of a disc. Using repeat play. Using random play. Creating a program list. Searching a disc. Switching subtitles. Switching audio language/channels.

DV270_ASIA.book 5

Before you start

Chapter 1

Features
24-bit/192kHz compatible DAC The on-board 24-bit/192kHz DAC means that this player is fully compatible with high sampling-rate discs, capable of delivering exceptional sound quality in terms of dynamic range, low-level resolution and high-frequency detail. Surround sound entertainment with Dolby Digital and DTS software When connected to a suitable AV amplifier or receiver, this player gives great surround sound with Dolby Digital and DTS discs. PureCinema Progressive Scan video When connected to a progressive scancompatible TV or monitor using the component video outputs, you can enjoy extremely stable, flicker free images, with the same frame refresh rate as the original movie. New Disc Navigator with moving pictures The new Disc Navigator enables you play the first few seconds of each title or chapter in a thumbnail image on screen. DSP effects for enhanced playback See Audio Settings and Video Adjust menus on page 28. Picture zoom See Zooming the screen on page 26. MP3 and WMA compatibility See Compressed audio compatibility on page 7. JPEG compatibility See JPEG file compatibility on page 8. Energy saving design An auto power-off function switches the player into standby if not used for about 30 minutes.

The remote has a range of about 7m. Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the units remote sensor. Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to this unit. Replace the batteries when you notice a fall off in the operating range of the remote.

DV270_ASIA.book 15

Getting started

Chapter 4

Switching on
After making sure that everything is connected properly and that the player is plugged in, press STANDBY/ON on the front panel or remote control to switch the player on. Also, switch on your TV and make sure that it is set to the input you connected the DVD player to.
Using the on-screen displays
For ease of use, this player makes extensive use of graphical on-screen displays (OSDs). All the screens are navigated in basically the same way, using the cursor buttons ( / / / ) to change the highlighted item and pressing ENTER to select it.
ENTER HOME MENU GUIDE RETURN
FAQ My DVD player switches on but there is nothing displayed on my TV. Make sure that the TV is set to the correct video input (not a TV channel). For example, if you connected this player to the VIDEO 1 inputs on your TV, switch your TV to VIDEO 1. Note This player features a screen saver and an auto power off function. If the player is stopped and no button is pressed for around five minutes, the screen saver starts. If the disc tray is closed but no disc is playing and no control is pressed for about 30 minutes, the player automatically goes into standby.

Button HOME MENU / / /

What it does Display/exit the on-screen display. Changes the highlighted menu item. Selects the highlighted menu item (both ENTER buttons on the remote work in exactly the same way). Returns to the main menu without saving changes.
Note From here on in this manual, the word select generally means use the cursor buttons to highlight an item on-screen, then press ENTER.

DV270_ASIA.book 16

Setting up the player for your TV
If you have a widescreen (16:9) TV, you should setup the player so that the picture will be presented correctly. If you have a conventional (4:3) TV, you can leave the player on the default setting and move on to the next section. 1 Press HOME MENU and select Initial Settings.

FAQ After I load a DVD disc, it ejects automatically after a few seconds! Most likely, the disc is the wrong region for your player. The region number should be printed on the disc; check it against the region number of the player (which you can find on the rear panel). See also DVD-Video regions on page 37. If the region number is OK, it may be that the disc is damaged or dirty. Clean the disc and look for signs of damage. See also Taking care of your player and discs on page 34. Why wont the disc I loaded play? First check that you loaded the disc the right way up (label side up), and that its clean and undamaged. See Taking care of your player and discs on page 34 for information on cleaning discs. If a disc loaded correctly wont play, its probably an incompatible format or disc type, such as DVD-Audio or DVD-ROM. See Disc/content format playback compatibility on page 7 for more on disc compatibility. I have a widescreen TV so why are there black bars at the top and bottom of the screen when I play some discs? Some movie formats are such that even when played on a widescreen TV, black bars are necessary at the top and bottom of the screen. This is not a malfunction. I have a standard (4:3) TV and set the player to show widescreen DVDs in pan & scan format, so why do I still get black bars top and bottom with some discs? Some discs override the display preferences of the player, so even if you have 4:3 (Pan & Scan) selected, those discs will still be shown in letter box format. This is not a malfunction.

ENTER RETURN

Button RETURN Numbers (remote only)
What it does Displays the PBC menu. Use to enter a numbered menu option. Press ENTER to select. Displays the previous menu page (if there is one). Displays the next menu page (if there is one).

DV270_ASIA.book 20

Chapter 5
Note Many of the functions covered in this chapter apply to DVD discs, Video CDs/ Super VCDs, CDs and WMA/MP3, JPEG discs, although the exact operation of some varies slightly with the kind of disc loaded. Some DVDs restrict the use of some functions (random or repeat, for example) in some or all parts of the disc. This is not a malfunction. When playing Video CD/Super VCDs, some of the functions are not available during PBC playback. If you want to use them, start the disc playing using a number button to select a track.

Playing in slow motion

You can play DVDs at four different slow motion speeds, forwards and backwards. Video CD/Super VCDs can be played at four different forward slow motion speeds. 1 During playback, press (pause).

Note The time it takes for the player to load a file increases with large file sizes. Discs can contain up to 299 folders and up to 648 folders and files combined.
Original: Time Thumbnails from the Original content at 10 minute intervals. Playlist: Time Thumbnails from the Playlist at 10 minute intervals.

DV270_ASIA.book 22

The screen shows up to six moving thumbnail images displayed one after another. To display the previous/next six thumbnails, press / (you dont have to wait for all the thumbnails to finish playing to display the previous/next page). 3 Select the thumbnail image for what you want to play.
1 Press HOME MENU and select Disc Navigator from the on-screen menu.

00:00/ 00:00 0kbps

Folder1 Folder2 Folder3 Folder4
2 Use the cursor buttons ( / / / ) and ENTER to navigate. Use the cursor up/down buttons ( / ) to move up and down the folder/file list. Use the cursor left button ( parent folder. Use ENTER or cursor right ( highlighted folder. ) to return to the ) to open a
Disc Navigator: Title 01- 49: - -
You can use either the cursor buttons ( / / / ) and ENTER to select a thumbnail, or the number buttons. To select using the number buttons, enter a two-digit number then press ENTER. Tip Another way to find a particular place on a disc is to use one of the search modes. See Searching a disc on page 25.
You can also return to the parent folder by going to the top of the list to the. folder, then pressing ENTER. When a JPEG file is highlighted, a thumbnail image is displayed on the right.

Folder 2

Browsing WMA, MP3 and JPEG files with the Disc Navigator
Use the Disc Navigator to find a particular file or folder by filename.

File2 File3 File4 File5

3 To play the highlighted track or display the highlighted JPEG file, press ENTER. When a WMA/MP3 file is selected, playback begins, starting with the selected track, and continues until the end of the folder. When a JPEG file is selected, a slideshow begins, starting with that file, and continues to the end of the folder.

Tip Use the following controls during random play:
Button What it does Selects a new track/title/chapter at random. Returns to the beginning of the current track/title/chapter; further presses select another random track/title/chapter.

Creating a program list

This feature lets you program the play order of titles/chapters/tracks on a disc. Important You cant use Program play with VR format DVD-RW discs, Video CD/Super VCDs playing in PBC mode, WMA/MP3 discs, or while a DVD disc menu is being displayed. 1 Press PLAY MODE and select Program from the list of functions on the left.
Random Title Random Chapter Random Off
2 Select a random play option. The random play options available depend on the kind of disc loaded. For example, for DVD discs, you can select Random Title or Random Chapter, (or Random Off).
Create/Edit Playback Start Playback Stop Program Delete
2 Select Create/Edit from the list of program options. For CDs and Video CD/Super VCDs, select On or Off to switch random play on or off.

DV270_ASIA.book 25

3 Use the cursor buttons and ENTER to select a title, chapter or track for the current step in the program list. For a DVD disc, you can add a title or a chapter to the program list.
Program Program Step 01. 01 02. 03. 04. 05. 06. 07. 08. Title 1~38 Title 01 Title 02 Title 03 Title 04 Title 05 Title 06 Title 07 Title 08 Chapter 1~4 Chapter 001 Chapter 002 Chapter 003 Chapter 004
Tip Use the following controls during program play:
Button PLAY MODE What it does Save the program list and exit the program edit screen without starting playback (HOME MENU does the same). Skip to the next step in the program list.
For a CD or Video CD/Super VCD, select a track to add to the program list. After pressing ENTER to select the title/ chapter/track, the step number automatically moves down one. 4 Repeat step 3 to build up a program list. A program list can contain up to 24 titles/ chapters/tracks. You can insert steps into the middle of a program list by just highlighting the position where you want the new step to appear and entering a title/chapter/track number. To delete a step, highlight it and press CLEAR. 5 To play the program list, press (play). Program play remains active until you turn off program play (see below), erase the program list (see below), eject the disc or switch off the player.

Other functions available from the program menu
There are a number of other options in the program menu in addition to Create/Edit. Playback Start Starts playback of a saved program list Playback Stop Turns off program play, but does not erase the program list Program Delete Erases the program list and turns off program play

Searching a disc

You can search DVD discs by title or chapter number, or by time; CDs and Video CD/Super VCDs by track number or time. Important Search functions are not available with Video CD/Super VCDs in PBC mode, or with WMA/MP3 discs. 1 Press PLAY MODE and select Search Mode from the list of functions on the left. 2 Select a search mode. The search options available depend on the kind of disc loaded.

DV270_ASIA.book 26

The disc must be playing in order to use time search. 3 Use the number buttons to enter a title, chapter or track number, or a time.
Switching audio language/ channels
When playing a DVD disc recorded with dialog in two or more languages, you can switch audio language during playback. When playing a VR format DVD-RW disc recorded with dual-mono audio, you can switch between the main, sub, and mixed channels during playback. When playing a Video CD/Super VCD, you can switch between stereo, just the left channel or just the right channel. 1 Press AUDIO repeatedly to select an audio language/channel option. The language/channel information is shown on-screen. Note Some DVD discs only allow you to change audio language from the disc menu. Press TOP MENU or MENU to access. To set DVD audio language preferences, see Language settings on page 31.
Title Search Chapter Search Time Search

Input Chapter 1

For a time search, enter the number of minutes and seconds into the currently playing title (DVD) or track (CD/Video CD/ Super VCD) you want playback to resume from. For example, press 4, 5, 0, 0 to have playback start from 45 minutes into the disc. For 1 hour, 20 minutes and 30 seconds, press 8, 0, 3, 0. 4 Press ENTER to start playback.

Switching subtitles

Some DVD discs have subtitles in one or more languages; the disc box will usually tell you which subtitle languages are available. You can switch subtitle language during playback. 1 Press SUBTITLE repeatedly to select a subtitle option.
Current / Total Subtitle 1/2 English

Zooming the screen

Using the zoom feature you can magnify a part of the screen by a factor of 2 or 4, while watching a DVD or Video CD/Super VCD or playing a JPEG disc. 1 During playback, use the ZOOM button to select the zoom factor (Normal, 2x or 4x). Since DVD, Video CD/Super VCD and JPEG pictures have a fixed resolution, picture quality will deteriorate, especially at 4x zoom. This is not a malfunction. 2 Use the cursor buttons to change the zoomed area. You can change the zoom factor and the zoomed area freely during playback.

Languages as displayed DVD disc menus will be displayed in the selected language, if Other Language Subtitle Display On Off
Select to choose a language other than the ones displayed (see page 37). Subtitles are displayed according to your selected subtitle language (see above). Subtitles are always off by default when you play a DVD disc (note that some discs override this setting).

Display settings

Setting OSD Language Option English What it means
On-screen displays of the player are in English.
Languages as displayed On-screen displays are shown in the language selected. Angle Indicator On Off
A camera icon is displayed on-screen during multi-angle scenes on a DVD disc. No multi-angle indication is shown.

DV270_ASIA.book 33

Parental Lock
Default level: Off; Default password: none; Default Country code: us (2119) To give you some control over what your children watch on your DVD player, some DVDVideo discs feature a Parental Lock level. If your player is set to a lower level than the disc, the disc wont play. Some discs also support the Country Code feature. The player does not play certain scenes on these discs, depending on the Country Code you set. Note Not all discs use Parental Lock, and will play without requiring the password first. If you forget your password, youll need to reset the player to register a new password. (see Resetting the player on page 36)

Select Password Change.

2 Use the number buttons to enter your existing password, then press ENTER. 3 Enter a new password and press ENTER. This registers the new password and you will return to the Options menu screen.
Setting/changing the Parental Lock
1 Select Level Change. 2 Use number buttons to enter your password, then press ENTER. 3 Select a new level and press ENTER. Press (cursor left) repeatedly to lock more levels (more discs will require the password); press (cursor right) to unlock levels. You cant lock level 1.
This sets the new level and you will return to the Options menu screen.
Registering a new password
You must register a password before you can change the Parental Lock level or enter a Country code. 1 Select Password.
Setting/changing the Country code
You can find the Country code list on page 38. 1 Select Country Code.
2 Use the number buttons to enter a 4digit password. The numbers you enter show up as asterisks (*) on-screen. 3 Press ENTER to register the password. You will return to the Options menu screen.
2 Use number buttons to enter your password, then press ENTER. 3 Select a Country code and press ENTER. There are two ways you can do this: Select by code letter: Use / (cursor up/ down) to change the Country code. Select by code number: Press (cursor right) then use the number buttons to enter the 4-digit Country code. The new Country code is set and you will return to the Options menu screen. Note that the new Country code doesnt take effect until the next disc is loaded (or the current disc is reloaded).

The DVD players lens should not become dirty in normal use, but if for some reason it should malfunction due to dust or dirt, consult your nearest Pioneer-authorized service center. We do not recommend using commercially available lens cleaners for CD players.

Condensation

Condensation may form inside the player if it is brought into a warm room from outside, or if the temperature of the room rises quickly. Although the condensation wont damage the player, it may temporarily impair its performance. Leave it to adjust to the warmer temperature for about an hour before switching on.

Standard TV users

If you have a standard TV, the TV Screen setting (page 31) of this player should be set to 4:3 (Letter Box) or 4:3 (Pan&Scan), depending on which you prefer. Set to 4:3 (Letter Box), widescreen discs are shown with black bars top and bottom.

Moving the player

If you need to move the player, first press STANDBY/ON on the front panel to turn the player off. Wait for -OFF- to disappear from the display, then unplug the power cable. Never lift or move the unit during playbackdiscs rotate at a high speed and may be damaged.
Set to 4:3 (Pan&Scan), widescreen discs are shown with the left and right sides cropped. Although the picture looks larger, you dont actually see the whole picture.
Screen sizes and disc formats
DVD-Video discs come in several different screen aspect ratios, ranging from TV programs, which are generally 4:3, to CinemaScope widescreen movies, with an aspect ratio of up to about 7:3. Televisions, too, come in different aspect ratios; standard 4:3 and widescreen 16:9. Please note that many widescreen discs override the players settings so that the disc is shown in letter box format regardless of the setting.

DV270_ASIA.book 36

Note Using the 16:9 (Wide) setting with a standard 4:3 TV, or either of the 4:3 settings with a widescreen TV, will result in a distorted picture.
Type DVD/ Super VCD Format NTSC PAL

Player setting

NTSC NTSC NTSC NTSC NTSC NTSC PAL PAL PAL PAL PAL PAL AUTO NTSC PAL NTSC PAL NTSC or PAL

Setting the TV system

(Except DV-270-s and DV-373-s Taiwanese model) The default setting of this player is AUTO, and unless you notice that the picture is distorted when playing some discs, you should leave it set to AUTO. If you experience picture distortion with some discs, set the TV system to match your country or regions system. Doing this, however, may restrict the kinds of disc you can watch. The table below shows what kinds of disc are compatible with each setting (AUTO, PAL and NTSC). 1 If the player is on, press ON to switch it to standby. STANDBY/
Video CD NTSC PAL CD no disc

Resetting the player

Use this procedure to reset all the players settings to the factory default. 1 Switch the player into standby.
2 Using the front panel controls, hold down then press STANDBY/ON to switch the TV system. The TV system changes as follows: AUTO NTSC PAL NTSC PAL AUTO
2 Using the front panel buttons, hold down the (stop) button and press STANDBY/ON to switch the player back on. All the players settings are now reset.

Power reset

Use this procedure to switch the power off if the player is unresponsive to any control from the front panel or remote. 1 Press and hold the front panel STANDBY/ON for 10 seconds. When the power is completely off, you cannot use the remote to switch it back on again. Use the front panel STANDBY/ON button.
Note You have to switch the player into standby (press STANDBY/ON) before each change.

DV270_ASIA.book 37

DVD-Video regions
All DVD-Video discs carry a region mark on the case somewhere that indicates which region(s) of the world the disc is compatible with. Your DVD player also has a region mark, which you can find on the rear panel. Discs from incompatible regions will not play in this player. Discs marked ALL will play in any player. The diagram below shows the various DVD regions of the world.
Selecting languages using the language code list
Some of the language options (such as DVD Language in the Setup Navigator) allow you to set your prefered language from any of the 136 languages listed in the language code list on page 38. 1 Select Other Language.
2 Use the / (cursor left/right) buttons to select either a code letter or a code number. 3 Use the / (cursor up/down) buttons to select a code letter or a code number. See Language code list on page 38 for a complete list of languages and codes.

Component video output

Y (luminance) - Output level. 1 Vp-p (75 ) PB (color) - Output level. 0.7 Vp-p (75 ) PR (color) - Output level. 0.7 Vp-p (75 ) Jack. RCA

S-video output

Y (luminance) - Output level. 1 Vp-p (75 ) C (color) - Output level.286 mVp-p (75 ) Jack. S-video
The specifications and design of this product are subject to change without notice, due to improvement.

Video output

Output level. 1 Vp-p (75 ) Jack. RCA
Published by Pioneer Corporation. Copyright 2004 Pioneer Corporation. All rights reserved
Audio output (1 stereo pair)
Output level. During audio output 200 mVrms (1 kHz, 20 dB) Number of channels. 2 Jacks. RCA

DV270_ASIA.book 44

PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 656-472-1111
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270

K002_En

<TPTZZ>

Printed in China

<VRB1330-A>