Reviews & Opinions
Independent and trusted. Read before buy Pioneer DV-270!

Pioneer DV-270

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Pioneer DV-270 Dvd Player, size: 1.4 MB
Related manuals
Pioneer DV270-S

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Pioneer DV-270About Pioneer DV-270
Here you can find all about Pioneer DV-270 like manual and other informations. For example: dvd player.

Pioneer DV-270 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Pioneer DV-270 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Pioneer DV-270 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION : THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.

D6-8-2-1_En

POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement. S002_En
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
When disposing of used batteries, please comply with governmental regulations or environmental public instructions rules that apply in your country/area. D3-4-2-3-1_En
This product includes FontAvenue fonts licenced by NEC corporation. FontAvenue is a registered trademark of NEC Corporation.
For U.S. and Australia Model
This product is for general household purposes. Any failure due to use for other than household purposes (such as long-term use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period. K041_En

C67-7-3_En

DV270_ASIA.book 4

Contents

01 Before you start
Features. 5 Whats in the box. 5 Hints on installation. 6 Disc / content format playback compatibility.. 7 Zooming the screen. 26 Switching camera angles. 27 Displaying disc information. 27
06 Audio Settings and Video Adjust menus
Audio Settings menu. 28 Video Adjust menu. 29

02 Connecting up

Easy connections. 9 Connecting using the S-video output. 10 Connecting using the component video output. 10 Connecting to an AV receiver. 12

DV270_ASIA.book 6

Putting the batteries in the remote
Open the battery compartment cover and insert the batteries as shown. Use two AA/R6P batteries and follow the indications ( , ) inside the compartment. Close the cover when youre finished.

Hints on installation

We want you to enjoy using this product for years to come, so please use the following guidelines when choosing a suitable location:
Use in a well-ventilated room. Place on a solid, flat, level surface, such as a table, shelf or stereo rack.
Important Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following: Dont mix new and old batteries together. Dont use different kinds of battery togetheralthough they may look similar, different batteries may have different voltages. Make sure that the plus and minus ends of each battery match the indications in the battery compartment. Remove batteries from equipment that isnt going to be used for a month or more. When disposing of used batteries, please comply with governmental regulations or environmental public instructions rules that apply in your country or area. Use in a place exposed to high temperatures or humidity, including near radiators and other heat-generating appliances. Place on a window sill or a place where the player will be exposed to direct sunlight. Use in an excessively dusty or damp environment. Place directly on top of an amplifier, or other component in your stereo system that becomes hot in use. Use near a television or monitor as you may experience interferenceespecially if the television uses an indoor antenna. Use in a kitchen or other room where the player may be exposed to smoke or steam. Use on a thick rug or carpet, or cover with cloththis may prevent proper cooling of the unit. Place on an unstable surface, or one that is not large enough to support all four of the units feet.

DV270_ASIA.book 7

Disc/content format playback compatibility
This player is compatible with a wide range of disc types (media) and formats. Playable discs will generally feature one of the following logos on the disc and/or disc packaging. Note however that some disc types, such as recordable CD and DVD, may be in an unplayable formatsee below for further compatibility information. Please also note that recordable discs cannot be recorded using this player.

CD-R/RW compatibility

Compatible formats: CD-Audio, Video CD/ Super VCD, ISO 9660 CD-ROM* containing MP3, WMA or JPEG files * ISO 9660 Level 1 or 2 compliant. CD physical format: Mode1, Mode2 XA Form1. Romeo and Joliet file systems are both compatible with this player. Multi-session playback: No Unfinalized disc playback: No

Connecting up

Chapter 2

Easy connections
The setup described here is a basic setup that allows you to play discs using just the cables supplied with the player. In this setup, stereo audio is played through the speakers in your TV.

A/V IN

DIGITAL AUDIO OUT

OPTICAL

COAXIAL

AUDIO OUT

S VIDEO OUT

COMPONENT VIDEO OUT

White Yellow Red

To power outlet

Important This player is equipped with copy protection technology. Do not connect this player to your TV via a VCR using audio/video or S-video cables, as the picture from this player will not appear properly on your TV. (This player may also not be compatible with some combination TV/VCRs for the same reason; refer to the manufacturer for more information.) When connecting to your TV as shown above, do not set the Component Out setting (see Video Output settings on page 31) to Progressive.

DV270_ASIA.book 10

1 Connect the VIDEO OUT and AUDIO OUT L/R jacks to a set of A/V inputs on your TV. Use the supplied audio/video cable, connecting the red and white plugs to the audio outputs and the yellow plug to the video output. Make sure you match up the left and right audio outputs with their corresponding inputs for correct stereo sound. See below if you want to use a component or S-video cable for the video connection. 2 Connect the supplied AC power cable to the AC IN inlet, then plug into a power outlet. Note Before unplugging the player from the power outlet, make sure you first switch it into standby using either the front panel STANDBY/ON button, or the remote control, and wait of the -OFF- message to disappear from the players display. For the above reasons, do not plug this player into a switched power supply found on some amplifiers and AV receivers.

S-VIDEO IN

Connecting using the component video output
You can use the component video output instead of the standard video out jack to connect this player to your TV (or other equipment). This should give you the best quality picture from the three types of video output available. Use a component video cable (not supplied) to connect the COMPONENT VIDEO OUT jacks to a component video input on your TV, monitor or AV receiver.
Connecting using the S-video output
If your TV (or other equipment) has an S-video (S1) input, you can use the S-video output on this player instead of the standard (composite) output for a better quality picture. Use an S-video cable (not supplied) to connect the S-VIDEO OUT to an S-video input on your TV (or monitor or AV receiver). Line up the small triangle above the jack with the same mark on the plug before plugging in.

COMPONENT VIDEO IN

DV270_ASIA.book 11

DIGITAL IN (OPTICAL)

2 Connect the analog AUDIO OUT L/R and VIDEO OUT jacks on this player to a set of analog audio and video inputs on your AV receiver.

AV receiver

AUDIO/ VIDEO IN

DIGITAL IN (COAXIAL)

Use a coaxial cable (similar to the supplied video cable) to connect the COAXIAL DIGITAL AUDIO OUT jack to a coaxial input on your AV receiver.

DV270_ASIA.book 13

Controls and displays

Chapter 3

Front panel

OPEN/ CLOSE

TOP MENU

HOME MENU

RETURN

OPEN/CLOSE

DV-373-s/ DV-373-K

RETURN (page 18)

STANDBY/ON (page 15) Remote control sensor (page 14) Disc tray OPEN/CLOSE (page 17) Display TOP MENU (page 18) ENTER & cursor buttons (page 15) MENU (page 18)
10 HOME MENU (page 15) (page 17) (page 17) (page 17) and (page 17)
15 RW Compatible (page 7)

DV270_ASIA.book 14

Remote control

(page 17)

12 PLAY MODE (page 23) 13 SURROUND (page 28)

STANDBY/ON OPEN/CLOSE

OPEN/CLOSE (page 17)

AUDIO SUBTITLE ANGLE

15 ANGLE (page 27) 16 CLEAR 17 ENTER (page 15) 18 MENU (page 18) 19 RETURN (page 15)

(page 20)

(page 18) (page 17)
PLAY MODE SURROUND ZOOM DISPLAY
23 DISPLAY (page 27) 24 ZOOM (page 26)

Using the remote control

Keep in mind the following when using the remote control: Make sure that there are no obstacles between the remote and the remote sensor on the unit.
STANDBY/ON (page 15) AUDIO (page 26) SUBTITLE (page 26) Number buttons (page 17) TOP MENU (page 18) ENTER & cursor buttons (page 15) HOME MENU (page 15) and (page 17) (page 18) / (page 20)
The remote has a range of about 7m. Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the units remote sensor. Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to this unit. Replace the batteries when you notice a fall off in the operating range of the remote.

DV270_ASIA.book 15

Getting started

Chapter 4

Switching on
After making sure that everything is connected properly and that the player is plugged in, press STANDBY/ON on the front panel or remote control to switch the player on. Also, switch on your TV and make sure that it is set to the input you connected the DVD player to.
Using the on-screen displays
For ease of use, this player makes extensive use of graphical on-screen displays (OSDs). All the screens are navigated in basically the same way, using the cursor buttons ( / / / ) to change the highlighted item and pressing ENTER to select it.

ENTER HOME MENU GUIDE RETURN
FAQ My DVD player switches on but there is nothing displayed on my TV. Make sure that the TV is set to the correct video input (not a TV channel). For example, if you connected this player to the VIDEO 1 inputs on your TV, switch your TV to VIDEO 1. Note This player features a screen saver and an auto power off function. If the player is stopped and no button is pressed for around five minutes, the screen saver starts. If the disc tray is closed but no disc is playing and no control is pressed for about 30 minutes, the player automatically goes into standby.

Button HOME MENU / / /

What it does Display/exit the on-screen display. Changes the highlighted menu item. Selects the highlighted menu item (both ENTER buttons on the remote work in exactly the same way). Returns to the main menu without saving changes.
Note From here on in this manual, the word select generally means use the cursor buttons to highlight an item on-screen, then press ENTER.

DV270_ASIA.book 16

Setting up the player for your TV
If you have a widescreen (16:9) TV, you should setup the player so that the picture will be presented correctly. If you have a conventional (4:3) TV, you can leave the player on the default setting and move on to the next section. 1 Press HOME MENU and select Initial Settings.

Initial Settings

Setting the language of this players on-screen displays
This sets the language of the players onscreen displays. 1 Press HOME MENU and select Initial Settings.
2 Select OSD Language from the Display settings.
2 Select TV Screen from the Video Output settings.
Digital Audio Out Video Output Language Display Options
OSD Language Angle Indicator
English Franais Deutsch Italiano Espaol

TV Screen Component Out

4:3 (Letter Box) 4:3 (Pan&Scan) 16:9 (Wide)

Taiwanese model only:

3 If you have a widescreen (16:9) TV, select 16:9 (Wide). If you have a conventional (4:3) TV, you can change the setting from 4:3 (Letter Box) to 4:3 (Pan & Scan) if you prefer. See Video Output settings on page 31 for more details. 4 Press HOME MENU to exit the menu screen.

English

3 Select a language. The on-screen language will change according to your selection. 4 Press HOME MENU to exit the menu screen.

Playing discs

The basic playback controls for playing DVD, CD, Video CD/Super VCD and MP3/WMA discs are covered here. Further functions are detailed in the next chapter. For details on playing JPEG picture discs, see Viewing a JPEG slideshow on page 21.

DV270_ASIA.book 20

Chapter 5
Note Many of the functions covered in this chapter apply to DVD discs, Video CDs/ Super VCDs, CDs and WMA/MP3, JPEG discs, although the exact operation of some varies slightly with the kind of disc loaded. Some DVDs restrict the use of some functions (random or repeat, for example) in some or all parts of the disc. This is not a malfunction. When playing Video CD/Super VCDs, some of the functions are not available during PBC playback. If you want to use them, start the disc playing using a number button to select a track.

Playing in slow motion

You can play DVDs at four different slow motion speeds, forwards and backwards. Video CD/Super VCDs can be played at four different forward slow motion speeds. 1 During playback, press (pause).
or / until 2 Press and hold / slow motion playback starts. The slow motion speed is shown onscreen. There is no sound during slow motion playback. 3 Press repeatedly to change the slow motion speed. 4 To resume normal playback, press (play). Depending on the disc, normal playback may automatically resume when a new chapter is reached.

Scanning discs

You can fast-scan discs forward or backward at four different speeds. 1 During playback, press or to start scanning. There is no sound while scanning DVDs and Video CD/Super VCDs. 2 Press repeatedly to increase the scanning speed. The scanning speed is shown on-screen. 3 To resume normal playback, press (play). When scanning a Video CD/Super VCD playing in PBC mode or a WMA/MP3 track, playback automatically resumes at the end or beginning of the track. Depending on the disc, normal playback may automatically resume when a new chapter is reached on a DVD disc.
Frame advance/frame reverse
You can advance or back up DVD discs frameby-frame. With Video CD/Super VCDs you can only use frame advance. 1 During playback, press (pause).
or / to reverse or 2 Press / advance a frame at a time. 3 To resume normal playback, press (play). Depending on the disc, normal playback may automatically resume when a new chapter is reached.

DV270_ASIA.book 21

Viewing a JPEG slideshow
After loading a CD/CD-R/RW containing JPEG picture files, press (play) to start a slideshow from the first folder/picture on the disc. The player displays the pictures in each folder in alphabetical order. Pictures are automatically adjusted so that they fill as much of the screen as possible (if the aspect ratio of the picture is different to your TV screen you may notice black bars at the sides, or at the top and bottom of the screen). While the slideshow is running:

Browsing video content with the Disc Navigator
Use the Disc Navigator to browse through the contents of a DVD or Video CD/Super VCD disc to find the part you want to play. Important You cant use the Disc Navigator with Video CD/Super VCDs in PBC mode. 1 During playback, press HOME MENU and select Disc Navigator from the onscreen menu.

Disc Navigator

What it does Pauses the slideshow; press again to restart. Displays the previous picture. Displays the next picture.
Disc Navigator Title Chapter

Select a view option.

Pauses the slideshow and rotates the displayed picture 90 (counter) clockwise. (Press (play) to restart slideshow). Pauses the slideshow and ips the displayed picture horizontally or vertically. (Press (play) to restart slideshow). Pauses the slideshow and zooms the picture. Press again to toggle between 1x, 2x and 4x zoom. (Press (play) to restart slideshow.) Displays the Disc Navigator screen (see below).
The options available depend on the kind of disc loaded and whether the disc is playing or not, but include: Title Titles from a DVD-Video disc. Chapter Chapters from the current title of a DVD-Video disc. Track Tracks from a Video CD/Super VCD disc. Time Thumbnails from a Video CD/Super VCD disc at 10 minute intervals. Original: Title Original titles from a VR mode DVD-RW disc. Playlist: Title Playlist titles from a VR mode DVD-RW disc.
Note The time it takes for the player to load a file increases with large file sizes. Discs can contain up to 299 folders and up to 648 folders and files combined.
Original: Time Thumbnails from the Original content at 10 minute intervals. Playlist: Time Thumbnails from the Playlist at 10 minute intervals.

DV270_ASIA.book 22

The screen shows up to six moving thumbnail images displayed one after another. To display the previous/next six thumbnails, press / (you dont have to wait for all the thumbnails to finish playing to display the previous/next page). 3 Select the thumbnail image for what you want to play.
1 Press HOME MENU and select Disc Navigator from the on-screen menu.

00:00/ 00:00 0kbps

Folder1 Folder2 Folder3 Folder4
2 Use the cursor buttons ( / / / ) and ENTER to navigate. Use the cursor up/down buttons ( / ) to move up and down the folder/file list. Use the cursor left button ( parent folder. Use ENTER or cursor right ( highlighted folder. ) to return to the ) to open a
Disc Navigator: Title 01- 49: - -
You can use either the cursor buttons ( / / / ) and ENTER to select a thumbnail, or the number buttons. To select using the number buttons, enter a two-digit number then press ENTER. Tip Another way to find a particular place on a disc is to use one of the search modes. See Searching a disc on page 25.

Using random play

Use the random play function to play titles or chapters (DVD-Video), or tracks (CD, Video CD/ Super VCD) at random. (Note that the same track/title/chapter may play more than once.)

DV270_ASIA.book 24

You can set the random play option when a disc is playing or stopped. Important Random play remains in effect until you select Random Off from the random play menu options. You cant use random play with VR format DVD-RW discs, Video CD/Super VCDs playing in PBC mode, WMA/MP3 discs, or while a DVD disc menu is being displayed. You can't use random play together with program or repeat play. 1 Press PLAY MODE and select Random from the list of functions on the left.
Tip Use the following controls during random play:
Button What it does Selects a new track/title/chapter at random. Returns to the beginning of the current track/title/chapter; further presses select another random track/title/chapter.

Creating a program list

This feature lets you program the play order of titles/chapters/tracks on a disc. Important You cant use Program play with VR format DVD-RW discs, Video CD/Super VCDs playing in PBC mode, WMA/MP3 discs, or while a DVD disc menu is being displayed. 1 Press PLAY MODE and select Program from the list of functions on the left.
Random Title Random Chapter Random Off
2 Select a random play option. The random play options available depend on the kind of disc loaded. For example, for DVD discs, you can select Random Title or Random Chapter, (or Random Off).
Create/Edit Playback Start Playback Stop Program Delete
2 Select Create/Edit from the list of program options. For CDs and Video CD/Super VCDs, select On or Off to switch random play on or off.

DV270_ASIA.book 25

3 Use the cursor buttons and ENTER to select a title, chapter or track for the current step in the program list. For a DVD disc, you can add a title or a chapter to the program list.
Program Program Step 01. 01 02. 03. 04. 05. 06. 07. 08. Title 1~38 Title 01 Title 02 Title 03 Title 04 Title 05 Title 06 Title 07 Title 08 Chapter 1~4 Chapter 001 Chapter 002 Chapter 003 Chapter 004
Tip Use the following controls during program play:
Button PLAY MODE What it does Save the program list and exit the program edit screen without starting playback (HOME MENU does the same). Skip to the next step in the program list.
For a CD or Video CD/Super VCD, select a track to add to the program list. After pressing ENTER to select the title/ chapter/track, the step number automatically moves down one. 4 Repeat step 3 to build up a program list. A program list can contain up to 24 titles/ chapters/tracks. You can insert steps into the middle of a program list by just highlighting the position where you want the new step to appear and entering a title/chapter/track number. To delete a step, highlight it and press CLEAR. 5 To play the program list, press (play). Program play remains active until you turn off program play (see below), erase the program list (see below), eject the disc or switch off the player.

Current / Total Subtitle 1/2 English

Zooming the screen

Using the zoom feature you can magnify a part of the screen by a factor of 2 or 4, while watching a DVD or Video CD/Super VCD or playing a JPEG disc. 1 During playback, use the ZOOM button to select the zoom factor (Normal, 2x or 4x). Since DVD, Video CD/Super VCD and JPEG pictures have a fixed resolution, picture quality will deteriorate, especially at 4x zoom. This is not a malfunction. 2 Use the cursor buttons to change the zoomed area. You can change the zoom factor and the zoomed area freely during playback.
Note Some discs only allow you to change subtitle language from the disc menu. Press TOP MENU or MENU to access. To set subtitle preferences, see Language settings on page 31.

DV270_ASIA.book 27

If the navigation square at the top of the screen disappears, press ZOOM again to display it.

Switching camera angles

Some DVD discs feature scenes shot from two or more anglescheck the disc box for details. When a multi-angle scene is playing, a icon appears on screen to let you know that other angles are available (this can be switched off if you prefersee Display settings on page 32). 1 During playback (or when paused), press ANGLE to switch angle.
Displaying disc information
Various track, chapter and title information, such as the elapsed and remaining playing time can be displayed on-screen while a disc is playing. 1 To show/switch/hide the information displayed, press DISPLAY repeatedly. When a disc is playing, the information appears at the top of the screen.

DV270_ASIA.book 28

Audio Settings and Video Adjust menus

Chapter 6

Audio Settings menu
The Audio Settings menu offers features for adjusting the way discs sound. 1 Press HOME MENU and select Audio Settings from the on-screen display.

Audio Settings

Note Audio DRC is only effective with Dolby Digital audio sources. Audio DRC is only effective through the digital output when Digital Out is set to On, and Dolby Digital Out is set to Dolby Digital > PCM (see Digital Audio Out settings on page 30). The effect of Audio DRC also depends on your speakers and AV receiver settings.
Select and change settings using the / (cursor) buttons, and ENTER.
Audio Settings Equalizer Virtual Surround Audio DRC Dialog On Off

Virtual Surround

Settings: On, Off (default) Switch on Virtual Surround to enjoy realistic surround sound effects from just two speakers. Tip You can also use the SURROUND button on the remote control to switch Virtual Surround on. Note Virtual Surround doesnt work with DTS, through either the analog or digital outputs. 96kHz Linear PCM audio is automatically downsampled to 48kHz if Virtual Surround is switched on.

Audio DRC

Settings: High, Medium, Low, Off (default) When watching Dolby Digital DVDs at low volume, its easy to lose the quieter sounds completelyincluding some of the dialog. Switching Audio DRC (Dynamic Range Control) to on can help by bringing up the quieter sounds, while controlling loud peaks. How much of a difference you hear depends on the material youre listening to. If the material doesnt have wide variations in volume, you may not notice much change.

DV270_ASIA.book 29

If the player is outputting Dolby Digital, DTS or MPEG bitstream audio (in other words, no conversion to PCM), Virtual Surround has no effect on the audio from the digital output. See Digital Audio Out settings on page 30 for how to set up the digital output formats. How good the surround effect is varies with the disc.
Make settings using the / / / (cursor) buttons, and ENTER.
Video Adjust Sharpness Brightness Contrast Gamma Hue Chroma Level Standard Off 0 0

Dialog

Settings: High, Medium, Low, Off (default) The Dialog feature is designed to make the dialog stand out from other background sounds in the soundtrack.
You can adjust the following picture quality settings: Sharpness Adjusts the sharpness of edges in the picture (Fine, Standard (default), Soft). Brightness Adjusts the overall brightness (20 to +20). Contrast Adjusts the contrast between light and dark (16 to +16). Gamma Adjusts the warmth of the picture (High, Medium, Low, Off (default)). Hue Adjusts the red/green balance (Green 9 to Red 9). Chroma Level Adjusts how saturated colors appear (9 to +9). Adjust the Brightness, Contrast, Hue and Chroma Level settings using the / (cursor left/right) buttons.

Brightness min max

Equalizer
Settings: Rock, Pop, Live, Dance, Techno, Classic, Soft, Off (default) The various preset EQ curves are designed to suit various styles of music. Note 96kHz linear PCM audio is automatically downsampled to 48kHz if the Equalizer is switched on.

Video Adjust menu

From the Video Adjust screen you can adjust various settings that affect how the picture is presented. 1 Press HOME MENU and select Video Adjust from the on-screen display.

Video Adjust

3 Press ENTER to return to the Video Adjust screen, or HOME MENU to exit.

DV270_ASIA.book 30

Initial Settings menu

Chapter 7

Using the Initial Settings menu
The Initial Settings menu provides audio and video output settings, parental lock settings, and display settings, among others. If an option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting. 1 Press HOME MENU and select Initial Settings.

This sets the new level and you will return to the Options menu screen.
Registering a new password
You must register a password before you can change the Parental Lock level or enter a Country code. 1 Select Password.
Setting/changing the Country code
You can find the Country code list on page 38. 1 Select Country Code.
2 Use the number buttons to enter a 4digit password. The numbers you enter show up as asterisks (*) on-screen. 3 Press ENTER to register the password. You will return to the Options menu screen.
2 Use number buttons to enter your password, then press ENTER. 3 Select a Country code and press ENTER. There are two ways you can do this: Select by code letter: Use / (cursor up/ down) to change the Country code. Select by code number: Press (cursor right) then use the number buttons to enter the 4-digit Country code. The new Country code is set and you will return to the Options menu screen. Note that the new Country code doesnt take effect until the next disc is loaded (or the current disc is reloaded).

Changing your password

To change your password, confirm your existing password then enter a new one.

DV270_ASIA.book 34

Additional information

Chapter 8

Taking care of your player and discs

General

Hold discs by the edge or by the center hole and edge. When you're not using a disc, return it to its case and store upright. Avoid leaving discs in excessively cold, humid, or hot environments (including under direct sunlight). Don't glue paper or put stickers on to discs. Do not use a pencil, ball-point pen or other sharptipped writing instrument to write on the disc. This player is designed to be used only with conventional, fully circular discs. Do not use shaped discs. Pioneer disclaims all liability arising in connection with the use of shaped discs.

Cleaning discs

Fingerprints and dist on discs can affect playback performance. Clean using a soft, dry cloth, wiping the disc lightly from the center to the outside edge as shown below.
Dont use self-adhesive disc labels on discs as these can cause the disc to warp slightly during playback causing distortion in the picture and/or sound.
If necessary, use a cloth soaked in alcohol, or a commercially available CD/DVD cleaning kit to clean a disc more thoroughly. Never use benzine, thinner or other cleaning agents, including products designed for cleaning vinyl records.

Damaged and shaped discs

Do not use cracked, chipped, warped, or otherwise damaged discs as they may damage the player.

DV270_ASIA.book 36

Note Using the 16:9 (Wide) setting with a standard 4:3 TV, or either of the 4:3 settings with a widescreen TV, will result in a distorted picture.
Type DVD/ Super VCD Format NTSC PAL

Player setting

NTSC NTSC NTSC NTSC NTSC NTSC PAL PAL PAL PAL PAL PAL AUTO NTSC PAL NTSC PAL NTSC or PAL

Setting the TV system

(Except DV-270-s and DV-373-s Taiwanese model) The default setting of this player is AUTO, and unless you notice that the picture is distorted when playing some discs, you should leave it set to AUTO. If you experience picture distortion with some discs, set the TV system to match your country or regions system. Doing this, however, may restrict the kinds of disc you can watch. The table below shows what kinds of disc are compatible with each setting (AUTO, PAL and NTSC). 1 If the player is on, press ON to switch it to standby. STANDBY/
Video CD NTSC PAL CD no disc

Resetting the player

Use this procedure to reset all the players settings to the factory default. 1 Switch the player into standby.
2 Using the front panel controls, hold down then press STANDBY/ON to switch the TV system. The TV system changes as follows: AUTO NTSC PAL NTSC PAL AUTO
2 Using the front panel buttons, hold down the (stop) button and press STANDBY/ON to switch the player back on. All the players settings are now reset.

Power reset

Use this procedure to switch the power off if the player is unresponsive to any control from the front panel or remote. 1 Press and hold the front panel STANDBY/ON for 10 seconds. When the power is completely off, you cannot use the remote to switch it back on again. Use the front panel STANDBY/ON button.
Note You have to switch the player into standby (press STANDBY/ON) before each change.

DV270_ASIA.book 37

DVD-Video regions
All DVD-Video discs carry a region mark on the case somewhere that indicates which region(s) of the world the disc is compatible with. Your DVD player also has a region mark, which you can find on the rear panel. Discs from incompatible regions will not play in this player. Discs marked ALL will play in any player. The diagram below shows the various DVD regions of the world.

Selecting languages using the language code list
Some of the language options (such as DVD Language in the Setup Navigator) allow you to set your prefered language from any of the 136 languages listed in the language code list on page 38. 1 Select Other Language.
2 Use the / (cursor left/right) buttons to select either a code letter or a code number. 3 Use the / (cursor up/down) buttons to select a code letter or a code number. See Language code list on page 38 for a complete list of languages and codes.

DV270_ASIA.book 38

Language code list
Language (Language code letter), Language code
Japanese (ja), 1001 English (en), 0514 French (fr), 0618 German (de), 0405 Italian (it), 0920 Spanish (es), 0519 Chinese (zh), 2608 Dutch (nl), 1412 Portuguese (pt), 1620 Swedish (sv), 1922 Russian (ru), 1821 Korean (ko), 1115 Greek (el), 0512 Afar (aa), 0101 Abkhazian (ab), 0102 Afrikaans (af), 0106 Amharic (am), 0113 Arabic (ar), 0118 Assamese (as), 0119 Aymara (ay), 0125 Azerbaijani (az), 0126 Bashkir (ba), 0201 Byelorussian (be), 0205 Bulgarian (bg), 0207 Bihari (bh), 0208 Bislama (bi), 0209 Bengali (bn), 0214 Tibetan (bo), 0215 Breton (br), 0218 Catalan (ca), 0301 Corsican (co), 0315 Czech (cs), 0319 Welsh (cy), 0325 Danish (da), 0401 Bhutani (dz), 0426 Esperanto (eo), 0515 Estonian (et), 0520 Basque (eu), 0521 Persian (fa), 0601 Finnish (fi), 0609 Fiji (fj), 0610 Faroese (fo), 0615 Frisian (fy), 0625 Irish (ga), 0701 Scots-Gaelic (gd), 0704 Galician (gl), 0712 Guarani (gn), 0714 Gujarati (gu), 0721 Hausa (ha), 0801 Hindi (hi), 0809 Croatian (hr), 0818 Hungarian (hu), 0821 Armenian (hy), 0825 Interlingua (ia), 0901 Interlingue (ie), 0905 Inupiak (ik), 0911 Indonesian (in), 0914 Icelandic (is), 0919 Hebrew (iw), 0923 Yiddish (ji), 1009 Javanese (jw), 1023 Georgian (ka), 1101 Kazakh (kk), 1111 Greenlandic (kl), 1112 Cambodian (km), 1113 Kannada (kn), 1114 Kashmiri (ks), 1119 Kurdish (ku), 1121 Kirghiz (ky), 1125 Latin (la), 1201 Lingala (ln), 1214 Laothian (lo), 1215 Lithuanian (lt), 1220 Latvian (lv), 1222 Malagasy (mg), 1307 Maori (mi), 1309 Macedonian (mk), 1311 Malayalam (ml), 1312 Mongolian (mn), 1314 Moldavian (mo), 1315 Marathi (mr), 1318 Malay (ms), 1319 Maltese (mt), 1320 Burmese (my), 1325 Nauru (na), 1401 Nepali (ne), 1405 Norwegian (no), 1415 Occitan (oc), 1503 Oromo (om), 1513 Oriya (or), 1518 Panjabi (pa), 1601 Polish (pl), 1612 Pashto, Pushto (ps), 1619 Quechua (qu), 1721 Rhaeto-Romance (rm), 1813 Kirundi (rn), 1814 Romanian (ro), 1815 Kinyarwanda (rw), 1823 Sanskrit (sa), 1901 Sindhi (sd), 1904 Sangho (sg), 1907 Serbo-Croatian (sh), 1908 Sinhalese (si), 1909 Slovak (sk), 1911 Slovenian (sl), 1912 Samoan (sm), 1913 Shona (sn), 1914 Somali (so), 1915 Albanian (sq), 1917 Serbian (sr), 1918 Siswati (ss), 1919 Sesotho (st), 1920 Sundanese (su), 1921 Swahili (sw), 1923 Tamil (ta), 2001 Telugu (te), 2005 Tajik (tg), 2007 Thai (th), 2008 Tigrinya (ti), 2009 Turkmen (tk), 2011 Tagalog (tl), 2012 Setswana (tn), 2014 Tonga (to), 2015 Turkish (tr), 2018 Tsonga (ts), 2019 Tatar (tt), 2020 Twi (tw), 2023 Ukrainian (uk), 2111 Urdu (ur), 2118 Uzbek (uz), 2126 Vietnamese (vi), 2209 Volapk (vo), 2215 Wolof (wo), 2315 Xhosa (xh), 2408 Yoruba (yo), 2515 Zulu (zu), 2621

 

Tags

X2550 AL-100R 32SII 2222FX AG-DV2000 Digia II MX-J35R DMC-FX55 Thinkpad X24 KX-TCD420E Rode NT4 HT503TH Dinosaur Digs IP5300 TC50PX24 El52300 ESP 5 Motorola M930 LUX S XPS 210 Inmotion IM7 Dvd Player HR102 Software Samsung A Zoom G1U TA-FB930R CK2320-80 GN 6110 PDP4294 SLV-SE730E SDR-H20 KA68030A GZ-HM400EU DAV-DZ560 240V EMS2820 PD113P SDR-S15 SRF-M78 Bandit 75 LE32C630k1P FJR1300AS RH7900 Leica M6 MS9158E VLS 615 Output-2007 M5285 Bose 151 CFD-E100L TH-A5 FH-P4100 Array EWD2204 WV-CS650 K7S5a PRO WD-15MFD Dimage 2300 HT-DDW790 DVP620VR-17B LP-R400 Hiphone MH-5883ALB 360 SMS AZ2060 00C Microscope XEA202 3000 N200 CDX-P650 VGN-TZ31xn B Nokia 770 MTD 790M Actifry M5000 Money SC-DC173U 100 MT Powermax 5 RY46501B 8707H Digital 600 XR-L500V Matra 720 PB1060 SA2620 02 YO-P20HII 730 Text 42PF5321 Nuvi 885T VLS517S FLS502 Abit KD7A 2-WAY KIT DSC-P92 KX-F1820 FX324 MAP MHC-GTZ2 Microtower PC AWC12T Cygnus125-2006

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101