Pioneer KEH-P2830R, size: 3.7 MB
Pioneer KEH-P2830r Annexe 1
Pioneer KEH-P2830r Annexe 2
Here you can find all about Pioneer KEH-P2830R like manual and other informations. For example: review.
Pioneer KEH-P2830R manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Pioneer KEH-P2830R please write about it to help other people.
[ Report abuse or wrong photo | Share your Pioneer KEH-P2830R photo ]
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
Multi-CD control High power cassette player with RDS tuner
Installation with the rubber bush. 3 Removing the Unit... 3
Using RDS Functions. 20
What is RDS?... Program Service Name Display.. AF Function... PI Seek Function... REG Function... TA Function... PTY Function... Basic Operation of Cassette Player. Fast Forward/Rewind.. Entering the Function Menu.. Radio Intercept.. 30
Connection Diagram.. 4 Connecting the Units.. 6 Key Finder.. 7 Before Using This Product. 8
About This Product.. 8 About This Manual.. 8 Precaution... 8 In Case of Trouble... 8
Using the Cassette Player.. 28
Cassette Player and Care. 31
Precaution.. 31 Cleaning the Head.. 31
Detaching and Replacing the Front Panel.. 9
Theft Protection.. 9
Audio Adjustment.. 32
Selecting the Mode.. Balance Adjustment... Bass/Treble Adjustment.. Loudness Adjustment.. 33 33
Initial Setting Menu.. 10
Entering the Initial Setting Menu. 10 Changing the FM Tuning Step.. 10 Switching the Auto PI Seek.. 11
Basic Operation.. 12
Switching Power On... 12 Switching Power Off.. 12
Other Functions.. 34
Time Display/Setting.. 34
Tuner Operation.. 13
Basic Operation of Tuner.. 13 AF Function Switching.. 14 Entering the Function Menu.. 15 Local Seek Tuning.. 16 Preset Tuning.. 16 BSM (Best Stations Memory). 17 Preset Memory.. 17 Recalling Preset Stations.. 18 Using the Programmable Button.. 18
Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up properly, and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop. If installation angle exceeds 30 from horizontal, the unit might not give its optimum performance.
Installation with the rubber bush
1. Dashboard 2. Holder After inserting the holder into the dashboard, then select the appropriate tabs according to the thickness of the dashboard material and bend them. (Install as firmly as possible using the top and the bottom tabs. To secure, bend the tabs 90 degrees.) 3. Rubber bush 4. Screw
Removing the Unit
5. Insert the supplied extraction keys into the unit, as shown in the figure, until they click into place. Keeping the keys pressed against the sides of the unit, pull the unit out.
This product conforms to new cord colors.
1. 2. 3. 4. 5. 6.
This unit Rear output Anntenna jack Multi-CD player (sold separately) Connect leads of the same color to each other.
Depending on the kind of vehicle, the function of 9 and 11 may be different. If this is the case, be sure to connect 8 to 11 and 9 to 10. When the power cord of a component such as a Multi-CD Player is connected to this unit's power cord, check that 9 and 11 (Back-up or Accessory) are operating correctly, and that connections are correct. 7. Cap 8. Yellow To terminal always supplied with power regardless of ignition switch position.
9. Yellow Back-up (or accessory) 10. Red To electric terminal controlled by ignition switch (12 V DC) ON/OFF. 11. Red Accessory (or Back-up) 12. Black (ground) To vehicle (metal) body. 13. ISO connector
In some vehicles, the ISO connector may be divided into two. If this is the case, be sure to connect to both connectors.
CAUTION Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied Installation manuals of both products and
14. Speaker leads White: Front left White/black: Front left Gray: Front right Gray/black: Front right Green: Rear left Green/black: Rear left Violet: Rear right Violet/black: Rear right 15. Fuse 16. Connecting cords with RCA pin plugs (sold separately). 17. Blue/white 18. System remote control 19. To system control terminal of the power amp or Auto-antenna relay control terminal. (Max. 300 mA 12 V DC.)
20. Power amp (sold separately) 21. Left speaker 22. Right speaker 23. Rear 24. Use this for connections when you have the separately available amplifier.
&RQQHFWLQJ WKH 8QLWV
This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recreational vehicle, truck, or bus, check the battery voltage. To avoid shorts in the electrical system, be sure to disconnect the battery cable before beginning installation. Secure the wiring with cable clamps or adhesive tape. To protect the wiring, wrap adhesive tape around them where they lie against metal parts. Route and secure all wiring so it cannot touch any moving parts, such as the gear shift, handbrake and seat rails. Do not route wiring in places that get hot, such as near the heater outlet. If the insulation of the wiring melts or gets torn, there is a danger of the wiring short-circuiting to the vehicle body. Don't pass the yellow lead through a hole into the engine compartment to connect to the battery. This will damage the lead insulation and cause a very dangerous short. Do not shorten any leads. If you do, the protection circuit may fail to work when it should. Never feed power to other equipment by cutting the insulation of the power supply lead of the unit and tapping into the lead. The current capacity of the lead will be exceeded, causing overheating. When replacing fuse, be sure to use only fuse of the rating prescribed on this unit. Since a unique BPTL circuit is employed, never wire so the speaker leads are directly grounded or the left and right speaker leads are common. The black lead is ground. Please ground this lead separately from the ground of high-current products such as power amps. If you ground the products together and the ground becomes detached, there is a risk of damage to the products or fire. Speakers connected to this unit must be high-power types possessing minimum rating of 40 W and impedance of 4 to 8 ohms. Connecting speakers with output and/or impedance values other than those noted here can damage the speakers. When an external power amp is being used with this system, be sure not to connect the blue/white lead to the amp's power terminal. Likewise, do not connect the blue/white lead to the power terminal of the auto-antenna. Such connection could cause excessive current drain and malfunction. To prevent incorrect connection, the input side of the IP-BUS connector is blue, and the output side is black. Connect the connectors of the same colors correctly. If this unit is installed in a vehicle that does not have an ACC (accessory) position on the ignition switch, the red lead of the unit should be connected to a terminal coupled with ignition switch ON/ OFF operations. If this is not done, the vehicle battery may be drained when you are away from the vehicle for several hours.
7R UHPRYH WKH IURQW SDQHO SXOO LWV ULJKWKDQG VLGH WRZDUG \RX
Take care not to grip it tightly or drop it.
8VH WKH SURWHFWLYH FDVH SURYLGHG WR VWRUHFDUU\ WKH GHWDFKHG IURQW SDQHO
Replacing the Front Panel 5HSODFH WKH IURQW SDQHO E\ FOLSSLQJ LW LQWR SODFH
Never use force or grip the display tightly when removing or replacing the front panel. Avoid subjecting the front panel to excessive shocks. Keep the front panel out of direct sunlight and high temperatures.
,QLWLDO 6HWWLQJ 0HQX
With this menu, you can perform initial settings for the unit. Setting options cover everything from tuning steps for the tuner to auto PI seek ON/OFF switching.
Entering the Initial Setting Menu
(QWHU WKH ,QLWLDO 6HWWLQJ 0HQX ZLWK WKH VRXUFHV RII
Hold for 2 seconds
To cancel the Initial Setting Menu, press the BAND button. 1RWH
Holding down the Function button for 2 seconds also cancels the Initial Setting Menu.
6HOHFW WKH GHVLUHG PRGH
Each press changes the Mode.
Each press of the Function button selects the mode in the following order: FM STEP = A-PI
Changing the FM Tuning Step
Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to 100 kHz when the AF or TA mode is activated. It may be preferable to set tuning step to 50 kHz in the AF mode.
6HOHFW WKH GHVLUHG WXQLQJ VWHS
The tuning step remains set at 50 kHz during Manual tuning. The tuning step returns to 100 kHz if the battery is temporarily disconnected.
Switching the Auto PI Seek
During Preset Station PI Seek operation, you can switch the Auto PI Seek function ON/OFF. (Refer to PI Seek Function on page 22.)
6ZLWFK WKH $XWR 3, 6HHN 21 RU 2))
Switching the AUX mode
It is possible to use auxiliary (AUX) equipment with this product. Activate the AUX mode when using external equipment with this product.
6ZLWFK WKH $8; PRGH 21 RU 2))
Switching Power On
6HOHFW WKH GHVLUHG VRXUFH VXFK DV WKH WXQHU
Each press of the SOURCE button selects the desired source in the following order: Tuner C Tape C Multi-CD player C AUX 1RWH
In the following cases, the sound source will not change: *No Multi-CD player is connected to this unit. *No cassette tape is set in this unit. *No magazine is set in the Multi-CD player. *AUX (external input) is set to OFF. (See page 11.)
Switching Power Off
Switch the sources OFF.
Hold for 1 second
Basic Operation of Tuner
6HOHFW 7XQHU 6HH SDJH
Each press changes the Source.
The program service name or frequency appears on the display. (" " indicator lights when a stereo station is selected.)
6HOHFW WKH GHVLUHG EDQG
FI C FII C FIII C MW/LW
7XQH WKH UHFHLYHU WR D KLJKHU RU ORZHU IUHTXHQF\
This products tuner lets you select the tuning by changing the length of the time you press the button.
Manual Tuning (step by step) Seek Tuning Manual Tuning (continuously) 0.3 seconds or less 0.3 - 2 seconds 2 seconds or more
To select a weak broadcasting station that cannot be tuned in with the Seek Tuning function, tune in with Manual Tuning.
5DLVH RU ORZHU WKH YROXPH
7XUQ WKH VRXUFH 2)) 6HH SDJH
AF Function Switching
This products AF function can be switched ON and OFF. AF should be switched OFF for normal tuning operations.
6ZLWFK $) 2))
To switch AF ON, repeat the preceding operation. 1RWH
You can also switch the AF Function ON/OFF in the Function Menu.
Entering the Function Menu
In this menu you can select tuner functions. 1RWH
REG, TA, PTY and AF are RDS functions. Refer to "Using RDS Function" for details and instructions on how to use these functions.
6HOHFW WKH GHVLUHG PRGH LQ )XQFWLRQ 0HQX
Each press of the Function button selects the mode in the following order: BSM + REG + LOCAL + TA + PTY SELECT + AF 1RWH
You can cancel the Function Menu by pressing the BAND button. After selecting the Function Menu, if you do not perform an operation within about 30 seconds, the Function Menu is automatically canceled.
Local Seek Tuning
This mode selects only stations with especially strong signals. The sensitivity can be adjusted in 4 steps for FM and 2 steps for MW/LW.
6HOHFW WKH /RFDO PRGH LQ WKH )XQFWLRQ 0HQX 6ZLWFK WKH /RFDO PRGH 21 RU 2))
6HOHFW WKH GHVLUHG /RFDO 6HHN 6HQVLWLYLW\ LQ WKH IROORZLQJ RUGHU
FM: LOCAL 1 , LOCAL 2 , LOCAL 3 , LOCAL 4 MW/LW: LOCAL 1 , LOCAL 2 1RWH
Pressing the BAND button cancels the Function Menu. The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.
Up to 18 FM stations (6 in FI (FM1), FII (FM2) and FIII (FM3)) and 6 MW/LW stations can be stored in memory. Store the stations in memory under buttons 1-6 beforehand with the BSM (Best Stations Memory) or Preset Memory function.
BSM (Best Stations Memory)
The BSM function stores stations in memory automatically.
6HOHFW WKH %60 PRGH LQ WKH )XQFWLRQ 0HQX 6ZLWFK WKH %60 PRGH 21
The stations with the strongest signals will be stored under buttons 1-6 and in order of their signal strength. 1RWH
Pressing the BAND button cancels the Function Menu.
7R FDQFHO WKH SURFHVV SUHVV WKH EXWWRQ LQ WKH )XQFWLRQ 0HQX EHIRUH PHPRUL]DWLRQ LV FRPSOHWH
The Preset Memory function stores stations in memory manually.
6HOHFW WKH VWDWLRQ ZKRVH IUHTXHQF\ \RX ZDQW WR VWRUH LQ PHPRU\ 3UHVV RQH RI EXWWRQV IRU VHFRQGV RU ORQJHU WR VWRUH WKH GHVLUHG VWDWLRQV
The station is stored in memory under the selected button.
Recalling Preset Stations
There are two ways to recall preset stations.
Direct Recall 3UHVV RQH RI EXWWRQV WR UHFDOO D VWDWLRQ SUHVHW XQGHU WKDW EXWWRQ
Sequential Recall 5HFDOO D VWDWLRQ SUHVHW XQGHU EXWWRQ
Using the Programmable Button
You can memorize Function Menu BSM, REG and LOCAL functions in the Programmable button. Initially, the BSM function is memorized in the Programmable button.
Setting the Programmable Button 6HOHFW WKH 3URJUDPPDEOH EXWWRQ VHWWLQJ PRGH
6HOHFW WKH IXQFWLRQ \RX ZDQW WR PHPRUL]H LQ WKH 3URJUDPPDEOH EXWWRQ
0HPRUL]H WKH IXQFWLRQ LQ WKH 3URJUDPPDEOH EXWWRQ
Pressing the BAND button cancels the Programmable button setting mode.
Using the Programmable Button
The Programmable button operates in a different way depending on the function programmed (memorized).
8VH WKH SURJUDPPDEOH EXWWRQ
Function BSM REG LOC
Press ON/OFF ON/OFF
Hold for 2 seconds ON/OFF Entering the Local Seek Sensitivity mode
8VLQJ 5'6 )XQFWLRQV
What is RDS?
RDS (Radio Data System) is a system for transmitting data along with FM programs. This data, which is inaudible, provides a variety of features such as: program service name, program type display, traffic announcement standby, automatic tuning and program type tuning, intended to aid radio listeners in tuning to a desired station. 1RWH
RDS service may not be provided by all stations. RDS functions, like AF (Alternative frequencies search) and TA (Traffic Announcement standby), are only active when your radio is tuned to RDS stations.
Program Service Name Display
With this function, the names of networks/stations providing RDS services replace the frequency on the display a few seconds after they are tuned in.
&KDQJH WKH GLVSOD\
Each press of the DISP/Clock button selects the mode in the following order: Program Service Name + PTY Information + Frequency 1RWH
After switching displays, if you do not perform an operation within 8 seconds, the Program Service Name is automatically displayed.
Displaying PTY Information
PTY (Program Type ID code) information for the currently tuned station appears on the display for 8 seconds. The information is correlated with the list in the section PTY Function on page 25.
Displaying the Frequency
The frequency of the current station appears on the display.
The AF (Alternative Frequencies search) function is used to search for other frequencies in the same network as the currently tuned station. It automatically retunes the receiver to another frequency in the network which is broadcasting a stronger signal when there are problems with reception of the currently tuned station or better reception is possible on a different frequency. 1RWH
AF tunes the receiver only to RDS stations when you use Seek tuning or BSM Auto Memory with the "AF" indicator ON. When you recall a preset station, the tuner may update the preset station with a new frequency from the station's AF list. (This is only available when using presets on the FM1 and FM2 bands.) No preset number appears on the display if the RDS data for the station received differs from that for the originally stored station. Sound may be temporarily interrupted by another program during an AF frequency search. When the tuner is tuned to a non-RDS station, the "AF" indicator flashes. AF can be switched ON or OFF independently for each FM band.
Activating/deactivating the AF Function
AF is set to ON by default.
7XUQ $) WR 2))
To turn AF back ON, repeat the preceding operation. 1RWH
PI Seek Function
The tuner searches for another frequency broadcasting the same programming. "PI SEEK" appears on the display and the radio volume is muted during a PI Seek. The muting is discontinued after completion of the PI Seek, whether or not the PI seek has succeeded. If the PI Seek is unsuccessful, the tuner returns to the previous frequency.
Auto PI Seek
If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal is too weak for proper reception, the PI Seek will automatically start.
Preset Station PI Seek
When preset stations cannot be recalled, as when traveling long distances, the unit can be set to perform PI Seek also during preset recall. The default setting for PI Seek is OFF. 1RWH
Refer to "Initial Setting Menu" for details on how to switch this unit ON/OFF.
When AF is used to retune the tuner automatically, REG (regional) limits the selection to stations broadcasting regional programs. 1RWH
Regional programming and regional networks are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area). The preset number may disappear on the display if the tuner tunes in a regional station which differs from the originally set station.
The REG function can be turned ON independently for each FM band.
6HOHFW WKH 5(* PRGH LQ WKH )XQFWLRQ 0HQX $FWLYDWH RU GHDFWLYDWH 5(* ZKLOH LQ DQ )0 EDQG
The TA (Traffic Announcement standby) function lets you receive traffic announcements automatically, no matter what source (tuner, cassette player or multi-CD player) you are listening to. The TA function can be activated for either a TP station (a station that broadcasts traffic information) or an EON TP station (a station carrying information which crossreferences TP stations).
Activating/Deactivating the TA Function 7XQH LQ D 73 RU (VWDWLRQ
The "TP" indicator lights when the tuner is tuned to a TP station, and both the "EON" and "TP" indicators light when it is tuned to an EON TP station.
$FWLYDWH WKH 7$ IXQFWLRQ
6HOHFW WKH GHVLUHG GLVF
5HYHUVH RU DGYDQFH WUDFN E\ WUDFN
Switching the Multi-CD Player
It is possible to connect up to three multi-CD players by means of a multiple installation adapter. When two or more multi-CD players are installed, their priorities must be specified. Follow the multi-CD player instructions carefully, and set the address switches properly.
6HOHFW WKH PXOWL&' SOD\HU \RX ZDQW WR XVH
M1 C M2 C M3
Disc Number Search
Disc Number Search (for 6-Disc, 12-Disc types)
You can select discs directly with the 1 to 6 buttons. Just press the number corresponding to the disc you want to listen to. 1RWH
When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the 1 to 6 buttons for 2 seconds or longer.
6HOHFW WKH GHVLUHG GLVF HJ 3UHVV EXWWRQ
Disc Number Rough Search (for 50-Disc type only)
This handy function lets you select discs loaded in a 50-Disc Multi-CD Player using the 1 to 5 buttons. The 50 discs are divided into five blocks, with each of the 1 to 5 buttons assigned to a block. For example, if you press button 1, discs 10 through 19 are searched in order, and then the disc with the lowest disc number is selected. 1RWH
Pressing button 5 lets you select the 50th disc only. Button 6 does not operate. Rough search of discs 1 to 9 is not possible. Use the % buttons to select a desired disc.
3UHVV WKH DSSURSULDWH EXWWRQ IURP WR WR VHOHFW WKH EORFN FRQWDLQLQJ WKH GHVLUHG GLVF HJ 3UHVV EXWWRQ
Track Search and Fast-forward/Reverse
Besides Track Search convenience when searching for a desired track, this unit also lets you fast-forward and reverse through tracks to find a desired phrase or section of music.
This feature enables you to advance or reverse track by track.
5HYHUVH RU DGYDQFH WUDFN E\ WUDFN
Hold for half a second or less
This feature enables you to advance or reverse at high speed between tracks.
5HYHUVH RU IDVWIRUZDUG WKURXJK WUDFNV
In this menu you can select Multi-CD Player functions.
Each press of the Function button selects the mode in the following order: REPEAT + RANDOM + ITS P + PAUSE 1RWH
Entering the Detailed Setting Menu
(QWHU WKH 'HWDLOHG 6HWWLQJ 0HQX
In this menu you can perform Disc Title Input, and ITS Program and Programmable button settings.
Each press of the Function button selects the mode in the following order: TITLE IN + ITS + PGM-FUNC To cancel the Detailed Setting Menu, hold down the Function button for 2 seconds. 1RWH
Pressing the BAND button also cancels the Detailed Setting Menu.
6HOHFW WKH 3DXVH PRGH LQ WKH )XQFWLRQ 0HQX 6WRS SOD\EDFN WHPSRUDULO\ RU UHVWDUWV WKH V\VWHP
Multi-CD Player Repeat Modes
Multi-CD players offer four repeat modes: One-track Repeat, Disc Repeat, Multi-CD player Repeat and All Repeat. Multi-CD player Repeat is the default mode (normal play) when one or more multi-CD players is installed.
6HOHFW WKH 5HSHDW 6HOHFWLQJ PRGH LQ WKH )XQFWLRQ 0HQX 6HOHFW WKH GHVLUHG UHSHDW PRGH LQ WKH IROORZLQJ RUGHU
Multi-CD player Repeat (MCD is displayed) + ALL Repeat (ALL is displayed) + Onetrack Repeat (TRK is displayed) + Disc Repeat (DSC is displayed) 1RWH
Pressing the BAND button cancels the Function Menu. All Repeat is available only when two or more multi-CD players are installed.
Multi-CD player repeat modes
Plays current track repeatedly. When Track Search or fast forward/reverse is performed, the mode returns to the Disc Repeat mode. When a different disc or multi-CD player is selected, the mode switches to the Multi-CD player Repeat mode. Plays current disc repeatedly. When a different disc or multi-CD player is selected, the mode switches to the Multi-CD player Repeat mode.
Multi-CD player Repeat Plays all discs loaded in the multi-CD player magazine repeatedly in order, (normal play) starting with the first disc. All Repeat Plays all discs in the magazines of all multi-CD players in order.
Multi-CD Player Random Play
Random Play is available when one or more multi-CD players are in use.
6HOHFW WKH 5DQGRP PRGH LQ WKH )XQFWLRQ 0HQX 6ZLWFK WKH 5DQGRP 3OD\ 21 RU 2))
When Multi-CD Player Random Play is ON, you can combine it with Repeat Mode to operate as shown below. Switching the Repeat Mode switches Random Play OFF. 1RWH
Pressing the BAND button cancels the Function Menu. Since playback is random, the same track may be repeated consecutively.
Multi-CD player Random Play options
One-track Repeat Disc Repeat Multi-CD player Repeat All Repeat
The mode returns to the Disc Repeat mode, and all tracks on the current disc are played randomly. All tracks on the current disc are played randomly. All tracks on the discs in the multi-CD player magazine are played randomly. All tracks on the discs in all the multi-CD players are played randomly.
ITS (Instant Track Selection)
The ITS function allows you to search for the track you wish to play back when one or more multi-CD players are installed. You can use ITS to program automatic playback of up to 24 tracks per disc from up to 100 discs. (You can store ITS program and Disc Title data for up to 100 discs in memory.) After 100 discs have been programmed, data for a new disc will overwrite the data for the disc that has not been played back for the longest time.
Disc Title Input
You can input Titles up to 10 letters long for up to 100 discs. Using this function lets you easily search for and select a desired disc for play. (You can store ITS program and Disc Title data for up to 100 discs in memory.)
3OD\ WKH GLVF \RX ZLVK WR LQSXW WKH GLVF WLWOH 6HOHFW WKH 'LVF 7LWOH ,QSXW PRGH LQ WKH 'HWDLOHG 6HWWLQJ 0HQX 6HOHFW D OHWWHU QXPEHU RU V\PERO
To insert a space, select the flashing cursor.
5HYHUVH RU DGYDQFH ER[ E\ ER[
:KHQ WKH WLWOH LV FRPSOHWHG VWRUH LW LQ PHPRU\ WR PDNH WKH IODVKLQJ FXUVRU IDGH RXW
The title remains on the message display. 1RWH
Pressing the BAND button cancels the Detailed Setting Menu. Titles remain in memory, even after the disc has been removed from the magazine, and are recalled when the disc is reinserted. After the titles for 100 discs have been entered, data for a new disc will overwrite the data for the disc that has not been played back for the longest time. If a Multi-CD player is installed, the data is stored in the Multi-CD players memory.
Displaying Disc Titles &KDQJH WKH 'LVF 7LWOH GLVSOD\ RI WKH FXUUHQW GLVF
If no title has been input for a disc, NO TITLE flashes on the display for 8 seconds, after which the display becomes blank. Repeat the preceding operation to return to the normal display.
In the Function Menu, you can memorize the PAUSE, REPEAT, RANDOM, and ITS functions in the Programmable button. Initially, PAUSE is memorized in the Programmable button.
Setting the Programmable Button 6HOHFW WKH 3URJUDPPDEOH EXWWRQ VHWWLQJ PRGH LQ WKH 'HWDLOHG 6HWWLQJ 0HQX 6HOHFW WKH IXQFWLRQ \RX ZDQW WR PHPRUL]H LQ WKH 3URJUDPPDEOH EXWWRQ
8VH WKH 3URJUDPPEOH EXWWRQ
PAUSE REPEAT RANDOM ITS
ON/OFF Selecting the mode ON/OFF ITS Programming
+ROG IRU VHFRQGV
Selecting the Mode
6HOHFW WKH PRGH \RX ZDQW WR DGMXVW
Each press of the AUDIO button selects the mode in the following order: Fader/Balance + Bass + Treble + Loudness When audio modes are selected for adjustment, the setting returns to the normal display after 30 seconds.
This function allows you to select a Fader/Balance setting that provides ideal listening conditions in all occupied seats.
6HOHFW WKH )DGHU%DODQFH PRGH
After adjustment use the BAND button to return to the normal display.
6KLIW WKH EDODQFH SURJUHVVLYHO\ WR WKH IURQW RU UHDU VSHDNHUV
"FAD F15" "FAD R15" is displayed as it moves from front to rear. 1RWH
"FAD 00" is the proper setting when 2 speakers are in use.
6KLIW WKH EDODQFH WR WKH OHIW RU ULJKW VSHDNHU UHVSHFWLYHO\
"BAL L9" "BAL R9" is displayed as it moves from left to right.
This product is equipped with two tone adjustment modes, the Bass Adjustment and Treble Adjustment modes.
6HOHFW %DVV $GMXVWPHQW PRGH RU 7UHEOH $GMXVWPHQW PRGH
,QFUHDVH RU GHFUHDVH WKH LQWHQVLW\ RI WKH EDVV RU WUHEOH ZKLFKHYHU LV VHOHFWHG
The display shows "+6" "-6".
5HSHDW VWHSV DERYH IRU WKH RWKHU %DVV RU 7UHEOH $GMXVWPHQW PRGH
Loudness Adjustment (LOUD)
The Loudness function compensates for deficiencies in the low and high sound ranges at low volume.
6HOHFW WKH /RXGQHVV DGMXVWPHQW PRGH
After selection use the BAND button to return to the normal display.
6ZLWFK WKH /RXGQHVV IXQFWLRQ 21 RU 2))
Displaying the time 7R WXUQ WKH WLPH GLVSOD\ 21 ZLWK WKH 6RXUFH 21
The time display disappears temporarily when you perform another operation, but the time indication returns to the display after 25 seconds.
Setting the Hours :KLOH KROGLQJ GRZQ WKH ',63&ORFN EXWWRQ IRU DW OHDVW VHFRQGV SUHVV EXWWRQ WR VHW WKH KRXU
Setting the Minutes :KLOH KROGLQJ GRZQ WKH ',63&ORFN EXWWRQ IRU DW OHDVW VHFRQGV SUHVV EXWWRQ WR VHW WKH PLQXWH
When you release the DISP/Clock button, the second count begins from 00 seconds.
Synchronizing with the time announcement :KLOH KROGLQJ GRZQ WKH ',63&ORFN EXWWRQ IRU DW OHDVW VHFRQGV SUHVV EXWWRQ WR UHVHW WKH PLQXWH DQG VHFRQG LQGLFDWLRQV WR ]HUR ([DPSOH :KHQ V\QFKURQL]LQJ EHWZHHQ DQG
The hour and minute can be advanced by pressing the respective buttons either consecutively or continuously.
Using the AUX mode
Selecting the AUX Mode 6HOHFW $8;
AUX Title Input
The display title for AUX mode can be changed.
6HOHFW WKH $X[ 7LWOH ,QSXW PRGH LQ 'HWDLOHG 6HWWLQJ 0HQX
,QSXW WKH $X[ 7LWOH
Refer to Disc Title Input on page 40, and perform procedures 3 to 5 in the same way. 1RWH
When using the CD-RB20 inter connector to connect an auxiliary component, switch power to that component ON only when you want to listen to it. If power to the auxiliary component is switched ON when you are listening to another source, you will hear sound from both sources simultaneously (sound will be mixed).
Power source.. 14.4 V DC (10.8 15.1 V allowable) Grounding system.. Negative type Max. current consumption.. 8.5 A Dimensions (mounting size).. 178 (W) E 50 (H) E 150 (D) mm (front face). 188 (W) E 58 (H) E 19 (D) mm Weight... 1.2 kg
Frequency range.. 87.MHz Usable sensitivity.. 11 dBf (1.0 V/75 , mono, S/N: 30 dB) 50 dB quieting sensitivity. 16 dBf (1.7 V/75 , mono) Signal-to-noise ratio.. 70 dB (IEC-A network) Distortion.. 0.3% (at 65 dBf, 1 kHz, stereo) Frequency response. 30 15,000 Hz (3 dB) Stereo separation.. 40 dB (at 65 dBf, 1 kHz)
Maximum power output.. 40 W E 4 Continuous power output.. 22 W E 4.. (DIN45324, +B = 14.4 V) Load impedance. 4 (allowable) Tone controls (Bass).. 12 dB (100 Hz) (Treble).. 12 dB (10 kHz) Loudness contour. +10 dB (100 Hz), +7 dB (10 kHz)...(volume: -30 dB)
Frequency range.. 531 1,602 kHz Usable sensitivity.. 18 V (S/N: 20 dB) Selectivity... 50 dB (9 kHz)
Frequency range.. kHz Usable sensitivity.. 30 V (S/N: 20 dB) Selectivity... 50 dB (9 kHz)
Tape.. Compact cassette tape (C-30 C-90) Tape speed... 4.8 cm/sec. Fast forward/rewinding time. Approx. 90 sec. for C-60 Wow & flutter... 0.13% (WRMS) Frequency response. 40 14,000 Hz (3 dB) Stereo separation... 45 dB Signal-to-noise ratio.. 52 dB (IEC-A network)
Specifications and the design are subject to possible modification without notice due to improvements.
France: tapez PIONEER
PIONEER ELECTRONIC CORPORATION
1-4-1 MEGURO, MEGURO-KU, TOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, California 90801, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium TEL:(0) 3/570.05.11 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia TEL: (03) 580-9911 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: (905) 479-4411 PIONEER ELECTRONICS DE MEXICO, S.A. de C.V. San Lorenzo Num 1009 3er piso Desp. 302 Col. Del Valle, Mexico D.F. C.P. 03100 TEL: 5-688-52-90
Published by Pioneer Electronic Corporation. Copyright 1999 by Pioneer Electronic Corporation. All rights reserved.
Printed in Belgium MAN-KEH-P2800R-GB/B
Z550A KW-XR411 CS351N RDR-HXD870 HL-1260 TCM-453V Ixus 75 250 Mark-3 Penpartner RZ-37LZ55 SA-PM15 Intuos 4 Ericsson W600 DHG525 RNS149 LE32R51BD Propalette 8000 CZ02RT11P LCD51VM TA-VE910 VGN-FW21ZR D 63 CD-67 Mazda MPV GT TCE Yamaha T50 YPR-20 TDS 500D DCS-6111 5738Z FLE1416W KX-TCD210G NEC AT30 RL36ebsm ESD7000 KX-FP155GRW SCD-XA5400ES ESD 787 XR-10S H 1000 GL4TI VGC-LN2M KDC-M9021SE SP42W4HP KX-TG7220FX CA-HDL095D Spellmate 500 LE37B650t2W Kd-g820 KX-TG2120W DMC-FX1 Armada 3500 Warmer CU-G125KE Total WAR 2 2 HA55S SLV-D920N DVD-3930CI Kurzweil PC3 XP-10 NV-SD240B G-note 7100 KD-S550 Motorazr- V9M Review Roomba 5200 DCP851 37B 4 0 1480 D G510RS DVD-HD935 EWS1045 L150A 2003 R2 Lrsc26911TT Kodak Z712 940BF Warrior-1998 FT920 Slim 3 Coffee MP12 Vectis S-1 C22CE XAV-60 Navirad V1 XV-N316S Uc 200B Ferrari F430 Camera EOC-3220- 8822 PC SS-MF515 SM-352F G-1000 PV-1 3K Omniaccess 512 LH-T6740A Printer CUV4XME
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101