Multi-CD control High power cassette player with FM/AM tuner

English Espaol

Operation Manual

Portugus (B)

KEH-P4025

Contents

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
Before You Start About this manual 2 Precautions 2 Whats what 3 Optional remote control 4 Protecting your unit from theft 5 Removing the front panel 5 Attaching the front panel 5 Power ON/OFF Turning the unit on 6 Selecting a source 6 Turning the unit off 6 Tuner Listening to the radio 7 Storing and recalling broadcast frequencies 8 Tuning in strong signals 8 Storing the strongest broadcast frequencies 8 Cassette Player Playing a tape 9 Repeating play 10 Skipping blank tape sections 10 Radio intercept 10
Multi-CD Player Playing a CD 10 50-disc multi-CD player 11 Repeating play 11 Playing tracks in a random order 12 Scanning CDs and tracks 12 Pausing CD playback 12 Audio Adjustments Introduction of audio adjustments 13 Using balance adjustment 13 Using the equalizer 14 Recalling equalizer curves 14 Adjusting equalizer curves 14 Adjusting loudness 14 Front image enhancer (FIE) 15 Adjusting source levels 15 Initial Settings Adjusting initial settings 16 Setting the time 16 Setting the FM tuning step 16 Setting the AM tuning step 17 Switching the auxiliary setting 17 Additional Information Setting the time display on or off 17 Using the AUX source 17 Selecting AUX as the source 17 Cassette tapes 18 Cleaning the playback head 18 Music search and repeat functions 18 Specifications 19

Before You Start

About this manual
This unit features a number of sophisticated functions ensuring superior reception and operation. All the functions have been designed for the easiest possible use, but many are not selfexplanatory. This operation manual will help you benefit fully from this products potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this unit. It is especially important that you read and observe precautions on this page and in other sections. This manual explains head unit operation. You can perform the same operations with the remote control (CD-R30).

Precautions

English
Keep this manual handy as a reference for operating procedures and precautions. Always keep the volume low enough so you can hear sounds outside of the car. Protect this product from moisture. If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station.
Espaol Deutsch Franais Italiano Nederlands

Whats what

1 VOLUME button Press to increase or decrease the volume. 2 LOCAL button (tuner) Press to switch local function on or off. PAUSE/SCAN button Press to switch pause function on or off. Press and hold for two seconds to switch scan function on or off. 3 BSM button (tuner) Press and hold for two seconds to switch BSM function on or off. REPEAT/RANDOM button Press to switch repeat function on or off. Press and hold for two seconds to switch random function on or off. 4 OPEN button Press to open the front panel. 5 AUDIO button Press to select various sound quality controls.

6 5//2/3 buttons Press to do manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions. 7 LOUDNESS button Press to switch loudness function on or off. 8 BAND button Press to select among three FM and one AM band and cancel the control mode of functions. (PRESET TUNING) buttons Press for preset tuning and disc number search when using a multi-CD player. 0 SOURCE button This unit is switched on by selecting a source. Press to cycle through all of the available sources. - EQ button Press to select various equalizer curves. = CLOCK button Press to switch clock display on or off.

~ 8 ! @ # % 5 $ 6

Optional remote control

Deutsch

The remote control CD-R30 is sold separately. Operation is the same as when using the button on the head unit. See the explanation of the head unit about the operation of each button with the exception of ATT, which is explained below. ~ +/ button Press to increase or decrease the volume. ! FUNCTION button Not used. @ CD button Press once to select a CD. # Cassette button Press once to select a cassette. $ TUNER button Press once to select a tuner.
Franais Italiano Nederlands
% ATT button Press to quickly lower the volume level, by about 90%. Press once more to return to the original volume level.
Protecting your unit from theft
The front panel can be detached from the head unit and stored in the protective case provided to discourage theft. Keep the front panel closed while driving. Important Never use force or grip the display and the buttons tightly when removing or attaching. Avoid subjecting the front panel to excessive shocks. Keep the front panel out of direct sunlight and high temperatures.
Attaching the front panel
Replace the front panel by holding it upright to this unit and clipping it securely into the mounting hooks.

Removing the front panel

1 Press OPEN to open the front panel. 2 Grip the left side of the front panel and pull it gently outward. Take care not to grip it tightly or drop it.
3 Put the front panel into the protective case provided for safe keeping.

Power ON/OFF

Turning the unit on
Press SOURCE to turn the unit on. When you select a source the unit is turned on.

Selecting a source

You can select a source you want to listen to. To switch to the cassette player, load a cassette tape in this unit (refer to page 9). Press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources: TunerCassette playerMulti-CD player External unitAUX
In the following cases, the sound source will not change: When a product corresponding to each source is not connected to this unit. When no cassette is set in this unit. When no magazine is set in the multi-CD player. When the AUX (external input) is set to off (refer to page 17). External Unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this product. Only one External Unit can be controlled by this product. When this units blue/white lead is connected to the cars auto-antenna relay control terminal, the cars antenna extends when this units source is switched on. To retract the antenna, switch the source off.

Deutsch Franais

Turning the unit off
Press SOURCE and hold for at least one second to turn the unit off.

Italiano Nederlands

Listening to the radio
1 Press SOURCE to select the tuner. 2 Use VOLUME to adjust the sound level. When you press VOLUME up/+, the volume is raised and when pressed down/, the volume is lowered.
If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 17). 1 BAND indicator Shows which band the radio is tuned to, AM or FM. 2 FREQUENCY indicator Shows to which frequency the tuner is tuned. 3 PRESET NUMBER indicator Shows what preset has been selected. 4 STEREO () indicator Shows that the frequency selected is being broadcast in stereo.
3 Press BAND to select a band. Press BAND until the desired band is displayed, F1, F2, F3 for FM or AM. 4 To perform manual tuning, press 2 or 3 with quick presses. The frequencies move up or down step by step. 5 To perform seek tuning, press and hold 2 or 3 for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found. You can cancel seek tuning by pressing either 2 or 3 with a quick press. If you press and hold 2 or 3 you can skip broadcasting stations. Seek tuning starts as soon as you release the buttons. Note When the frequency selected is being broadcast in stereo the STEREO () indicator will light.

Storing and recalling broadcast frequencies
If you press any of the PRESET TUNING buttons you can easily store up to six broadcast frequencies for later recall with the touch of a button. When you find a frequency that you want to store in memory press a PRESET TUNING button and hold until the preset number stops flashing. The number you have pressed will flash in the PRESET NUMBER indicator and then remain lit. The selected radio station frequency has been stored in memory. The next time you press the same PRESET TUNING button the radio station frequency is recalled from memory. Notes Up to 18 FM stations, 6 for each of the three FM bands, and 6 AM stations can be stored in memory. You can also use 5 and to recall radio station frequencies assigned to PRESET TUNING buttons.

Tuning in strong signals

English Espaol Deutsch Franais Italiano
Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Press LOCAL to turn local seek tuning on. Local seek sensitivity (LOC) appears in the display. 2 When you want to return to normal seek tuning, press LOCAL to turn local seek tuning off.
Storing the strongest broadcast frequencies
BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under PRESET TUNING buttons 16 and once stored there you can tune in to those frequencies with the touch of a button. Press and hold BSM for about two seconds to turn BSM on. BSM begins to flash. While BSM is flashing the six strongest broadcast frequencies will be stored under PRESET TUNING buttons in order of their signal strength. When finished, BSM stops flashing. To cancel the storage process, press BSM. Note Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using PRESET TUNING.

Nederlands

Cassette Player

Playing a tape

4 Use VOLUME to adjust the sound level. When you press VOLUME up/+, the volume is raised and when pressed down/, the volume is lowered. 5 To perform fast forward or rewind, press 2 or 3. FF or REW appears in the display. To cancel fast forward or rewind and return to playback, press BAND. You can cancel fast forward or rewind by pressing 2 or 3 in the same direction twice. 6 To perform forward or rewind music search, press 2 or 3 twice. F-MS (forward music search) or R-MS (rewind music search) appears in the display. The cassette player will fast forward or rewind to the next or previous blank spot on the tape and begin to play. To cancel music search and return to playback, press BAND. You can cancel music search by pressing 2 or 3 in the same direction again. 7 To change the direction of the tape transport, press BAND. Notes

1 TAPE DIRECTION indicator Shows the direction of the tape transport. 2 PLAY TIME indicator Shows the elapsed playing time of the current side of the tape. 1 Press OPEN to open the front panel. Cassette loading slot appears. 2 Insert a cassette tape into the cassette loading slot. Playback will automatically start. Cassette loading slot

TAPE EJECT button

You can eject a cassette tape by pressing

TAPE EJECT.

3 Close the front panel.
Do not insert anything other than a cassette tape into the cassette loading slot. PLAY TIME indicator starts from 0000 in the following cases: When a tape is inserted When the tape direction is changed When you rewind the tape to the beginning PLAY TIME indicator is halted when fast forward, rewind or music search is operating.
After a cassette tape has been inserted, press
SOURCE to select the Cassette player.

Multi-CD Player

Repeating play
Repeat play lets you hear the same track over again. 1 Press REPEAT/RANDOM to turn repeat play on. RPT appears in the display. The track presently playing will play and then repeat. 2 Press REPEAT/RANDOM to turn repeat play off. The track presently playing will continue to play and then play the next track.

Playing a CD

Espaol
You can use this unit to control a multi-CD player, which is sold separately. 1 TRACK NUMBER indicator Shows the track currently playing.
Skipping blank tape sections
Blank skip automatically fast forwards to the next song if there is a long period of silence (12 seconds or longer) between songs. 1 Press 5 to turn blank skip on. BS ON appears in the display. Long periods of silence between songs will be skipped. 2 Press 5 to turn blank skip off. BS OFF appears in the display. The complete cassette tape will play.
2 PLAY TIME indicator Shows the elapsed playing time of the current track. 3 DISC NUMBER indicator Shows the disc currently playing.

Franais Italiano

Radio intercept
This function allows you to listen to the radio during tape fast-forwarding/rewinding.
1 Press 6 to turn radio intercept on. RI ON appears in the display. 2 Press 6 to turn radio intercept off. RI OFF appears in the display.
1 Press SOURCE to select the multi-CD player. 2 Use VOLUME to adjust the sound level. When you press VOLUME up/+, the volume is raised and when pressed down/, the volume is lowered. 3 Select a disc you want to listen to with the 1 to 6 buttons. For discs located at 1 to 6, press the corresponding number button. If you want to select a disc located at 7 to 12, press and hold the corresponding numbers such as 1 for disc 7, until the disc number appears in the display. You can also sequentially select a disc by pressing 5/. 4 To perform fast forward or reverse, press and hold 2 or 3. 5 To skip back or forward to another track, press 2 or 3. Pressing 3 skips to the start of the next track. Pressing 2 once skips to the start of the current track. Pressing again will skip to the previous track. Notes When the multi-CD player performs the preparatory operations, READY is displayed. If the multi-CD player does not operate properly, an error message such as ERROR-14 may be displayed. Refer to the multi-CD player owners manual. If there are no discs in the multi-CD player magazine, NO DISC is displayed.

50-disc multi-CD player

Only those functions described in this manual are supported for 50-disc multi-CD players.
There are three repeat play ranges for the multiCD player: Multi-CD player repeat, one-track repeat, and disc repeat. Press REPEAT/RANDOM to select the repeat range. Press REPEAT/RANDOM until the desired repeat range appears in the display. Nothings displayed Repeat all discs in the multi-CD player RPT Repeat just the current track DISC Repeat the current disc Notes If you select other discs during repeat play, the repeat play range changes to multi-CD player repeat. If you perform track search or fast forward/reverse during RPT (one-track repeat), the repeat play range changes to DISC (disc repeat).
Playing tracks in a random order
Random play lets you play back tracks in a random order within the repeat range, multi-CD player repeat and disc repeat. 1 Select the repeat range. Refer to Repeating play on page 11. 2 Press and hold REPEAT/RANDOM for about two seconds to turn random play on. DRDM (random playing in a disc) or RDM (random playing in a magazine) appears in the display. Tracks will play in a random order within the previously selected multi-CD player repeat or disc repeat ranges. 3 Press and hold REPEAT/RANDOM for about two seconds to turn random play off. Tracks will continue to play in order.
3 When you find the desired track (or disc) press and hold PAUSE/SCAN for about two seconds to turn scan play off. The track (or disc) will continue to play. Note After track or disc scanning is finished, normal playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of the CD. 1 Press PAUSE/SCAN to turn pause on. PAUSE appears in the display. Play of the current track pauses. 2 Press PAUSE/SCAN to turn pause off. Play will resume at the same point that you turned pause on.

Scanning CDs and tracks

While you are using DISC (disc repeat), the beginning of each track on the selected disc plays for about 10 seconds. When you are using multi-CD player repeat, the beginning of the first track of each disc is played for about 10 seconds. 1 Select the repeat range. Refer to Repeating play on page 11. 2 Press and hold PAUSE/SCAN for about two seconds to turn scan play on. DSCN (scanning tracks) or SCAN (scanning discs) appears in the display. The first 10 seconds of each track of the present disc (or the first track of each disc) is played.

Audio Adjustments

Introduction of audio adjustments

Using balance adjustment

You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Press AUDIO to select FAD. Press AUDIO until FAD appears in the display. If the balance setting has been previously adjusted, BAL will be displayed. 2 Press 5 or to adjust front/rear speaker balance. Each press of 5 or moves the front/rear speaker balance towards the front or the rear. FAD F15 FAD R15 is displayed as the front/rear speaker balance moves from front to rear. FAD 0 is the proper setting when only two speakers are used. 3 Press 2 or 3 to adjust left/right speaker balance. When you press 2 or 3, BAL 0 is displayed. Each press of 2 or 3 moves the left/right speaker balance towards the left or the right. BAL L9 BAL R9 is displayed as the left/right speaker balance moves from left to right.
1 AUDIO display Shows the audio adjustments status. 2 LOUD indicator Appears in the display when loudness is turned on. Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)EQ-L (equalizer) LOUD (loudness)FIE (front image enhancer)SLA (source level adjustment) When selecting the FM tuner as the source, you cannot switch to SLA. To return to the display of each source, press BAND. Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display.

Using the equalizer

The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.
Adjusting equalizer curves English
You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM. 1 Press AUDIO to select the equalizer mode. Press AUDIO until EQ-L/EQ-M/EQ-H appears in the display.
Recalling equalizer curves
There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:
Display SPR-BASS POWERFUL NATURAL VOCAL CUSTOM EQ FLAT Equalizer curve Super bass Powerful Natural Vocal Custom Flat

Espaol Deutsch

2 Select the band you want to adjust with the 2/3. EQ-L (low) EQ-M (mid) EQ-H (high) 3 Press 5 or to adjust the equalizer curve. Each press of 5 or increases or decreases the equalizer curve respectively. +is displayed as the equalizer curve is increased or decreased. The actual range of the adjustments are different depending on which equalizer curve is selected. Note If you make adjustments when a curve other than CUSTOM is selected, the newly adjusted curve will replace the previous curve. Then a new curve with CUSTOM appears on the display while selecting the equalizer curve.

Franais

CUSTOM is an adjusted equalizer curve that you create. When EQ FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between EQ FLAT and a set equalizer curve. Press EQ to select the equalizer. If the equalizer has been previously set to an equalizer curve other than POWERFUL then the title of that previously selected equalizer curve will be displayed, such as SPR-BASS, NATURAL, VOCAL, CUSTOM, or EQ FLAT.

Italiano

Adjusting loudness
Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Press AUDIO to select LOUD. Press AUDIO until LOUD appears in the display.
2 Select LOUD on or off with 5/. 3 Select the desired level with 2/3.
LOW (low) MID (mid) HI (high)

Adjusting source levels

SLA (Source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. Settings are based on the volume level of the FM tuner, which remains unchanged. 1 Compare the FM tuner volume level with the level of the source you wish to adjust.
Note You can also switch LOUD on or off by pressing the LOUDNESS.
Front image enhancer (FIE)
The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging by cutting mid- and high-range frequency output from the rear speakers, limiting their output to low-range frequencies. You can select the frequency you want to cut. Precaution When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not just bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in volume. 1 Press AUDIO to select FIE. Press AUDIO until FIE appears in the display. 2 Select FIE on or off with 5/. 3 Select the desired frequency with 2/3. 100160250 (Hz) Notes After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu, and adjust front and rear speaker volume levels until they are balanced. Switch the F.I.E. function OFF when using a 2speaker system.
2 Press AUDIO to select SLA. Press AUDIO until SLA appears in the display. 3 Press 5 or to adjust the source volume. Each press of 5 or increases or decreases the source volume. SLA +4 SLA 4 is displayed as the source volume is increased or decreased. Notes Since the FM tuner volume is the control, it is not possible to apply source level adjustments to the FM tuner. The AM tuner volume level can also be adjusted with source level adjustments.

Initial Settings

Adjusting initial settings

Setting the time

This is used to set the time on the units clock display. 1 Press AUDIO to select the time. Press AUDIO until the time appears in the display.
Initial settings lets you perform initial set up of different settings for this unit. 1 Press SOURCE and hold until the unit turns off. 2 Press AUDIO and hold until TIME appears in the display. Press AUDIO repeatedly to switch between the following settings: TIMEFM STEPAM STEPAUX Use the following instructions to operate each particular setting. To cancel initial settings, press BAND. You can also cancel initial settings by holding down AUDIO until the unit turns off.
2 Select the portion of the time display you wish to set with 2/3. Pressing 2/3 will select a portion of the clock display: HOURMINUTE As you select portions of the clock display the portion selected will blink.

3 Select the correct time with 5/. Pressing 5 will increase the selected hour or minute. Pressing will decrease the selected hour or minute.
Setting the FM tuning step
The tuning step employed by Seek Tuning in the FM mode can be switched between 100 kHz (preset at the factory) and 50 kHz. 1 Press AUDIO to select FM STEP. Press AUDIO repeatedly until FM 100 appears in the display.
2 Select the FM tuning step with 2/3.

Additional Information

Note If seek tuning is performed in 50 kHz steps, stations may be tuned in imprecisely. Tune in the stations with manual tuning or use seek tuning again.
Setting the time display on or off
You can turn the time display on even when the sources and the demonstration are off. Press CLOCK to select the time display. Each press of CLOCK turns time display on or off. The time display disappears temporarily when you perform other operations, but the time indication is displayed again after 25 seconds.
Setting the AM tuning step
The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 1,602 kHz allowable) to 10 kHz (530 1,640 kHz allowable). 1 Press AUDIO to select AM STEP. Press AUDIO repeatedly until AM 9 appears in the display. 2 Select the AM tuning step with 2/3. Pressing 2/3 will switch the AM tuning step between 9 kHz and 10 kHz. The selected AM tuning step will appear in the display.

Using the AUX source

An IP-BUS-RCA Interconnector such as the CD-RB20 or CD-RB10 (sold separately) lets you connect this unit to auxiliary equipment featuring RCA output. For more details, refer to the IP-BUS-RCA Interconnector owners manual.
Selecting AUX as the source
Press SOURCE to select AUX as the source. Press SOURCE until AUX appears in the display. If the auxiliary setting is not switched on, AUX cannot be selected. For more details, see Switching the auxiliary setting on this page.
Switching the auxiliary setting
It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using external equipment connected to this unit. 1 Press AUDIO to select AUX. Press AUDIO repeatedly until AUX appears in the display. 2 Select AUX on or off with 5/. Pressing 5/ will switch AUX between on and off and that status will be displayed.

Cassette tapes

A loose, torn or warped label on a cassette tape can jam the cassette player. Do not use cassette tapes with loose, torn or warped labels. Cassette tapes longer than C-90 (90-minute tapes) can cause the tape to jam in the cassette player. Do not use tapes longer than C-90. Cassette tapes exposed to high temperatures may warp and jam the cassette player. Keep cassettes out of direct sunlight or places where there are high temperatures.
Music search and repeat functions
Music search and repeat functions may not work with these tapes: A tape with a gap of 4 seconds or less between songs A tape containing dialog or other non-musical content, with pauses lasting 4 seconds or longer A tape with an extremely quiet passage in the music lasting for 4 seconds or longer

English Espaol Deutsch

Store unused tapes in a tape case where there is no danger of them becoming loose, dirty or dusty.
Cleaning the playback head
If the head becomes dirty, the sound quality will get bad and there will be sound dropouts and other problems. If you have any of these problems the head may need cleaning.

Specifications

General
Power source.. 14.4 V DC (10.8 15.1 V allowable) Grounding system. Negative type Max. current consumption.. 10.0 A Dimensions (W H D): (DIN) Chassis. 157 mm Nose. 20 mm (D) Chassis. 162 mm Nose. 15 mm Weight.. 1.4 kg

Cassette player

Tape.. Compact cassette tape (C-30 C-90) Tape speed. 4.8 cm/sec Fast forward/rewinding time.. Approx. 100 sec (C-60) Wow & flutter.. 0.09% (WRMS) Frequency response. 30 16,000 Hz (3 dB) Stereo separation.. 45 dB Signal-to-noise ratio. 61 dB (IEC-A network)

FM tuner

Frequency range.. 87.5 108.0 MHz Usable sensitivity.. 11 dBf (1.1 V/75 , mono, S/N: 30 dB) 50 dB quieting sensitivity. 17 dBf (2.2 V/75 , mono) Signal-to-noise ratio. 58 dB (IEC-A network) Distortion.. 0.5% (at 65 dBf, 1 kHz, stereo) Frequency response. 30 15,000 Hz (3 dB) Stereo separation.. 24 dB (at 65 dBf, 1 kHz)
Continuous power output is 22 W per channel min. into 4 ohms, both channels driven 50 to 15,000 Hz with no more than 5% THD. Maximum power output.. 50 W 4 Load impedance.. 4 (allowable) Preout max output level/output impedance.. 2.2 V/1 k Equalizer (3-Band Equalizer): (LOW). Level : 12 dB (MID).. Level : 12 dB (HIGH).. Level : 12 dB Loudness contour (LOW).+3.5 dB (100 Hz), +3 dB (10 kHz) (MID)..+10 dB (100 Hz), +6.5 dB (10 kHz) (HIGH)..+11 dB (100 Hz), +11 dB (10 kHz) (volume : 30 dB)

AM tuner

Frequency range.. 531 1,602 kHz (9 kHz) 530 1,640 kHz (10 kHz) Usable sensitivity.. 20 V (S/N: 20 dB) Selectivity.. 50 dB (9 kHz) 50 dB (10 kHz)
Note Specifications and the design are subject to possible modifications without notice due to improvements.

English Espaol Franais

VOLUME 2 LOCAL PAUSE/SCAN 7 LOUDNESS 8 BAND
9 1-6(PRESET TURNING) 3 BSM PEPREAT/RANDOM 0 SOURCE
- EQ 4 OPEN = CLOCK 5 AUDIO

! FUNCTION

# Cassette

$ TUNER

SOURCE

SOURCE SOURCE

SOURCE
SOURCE VOLUME VOLUME VOLUME

BAND BAND F3 AM 2

1 BAND 2 FREQUENCY

3 PRESET NUMBER

4 STEREO

STEREO

PRESET TUNING
1 PRESET TUNING 2 PRESET NUMBER

LOCAL LOC LOCAL

PRESET TUNING PRESET TUNING 1-6 SET TUNING BSM BSM 5 PREBSM

BSM BSM

BSM PRESET TUNING

PRESET TUNING

VOLUME VOLUME VOLUME
1 TAPE DIRECTION 2 PLAY TIME

BAND 2 3

6 F-MS R-MS
7 TAPE EJECT 3 CD EJECT 00'00'' PLAY TIME

PLAY TIME

REPEAT/RANDOM RPT

REPEAT/RANDOM

1 TRACK NUMBER 2 PLAY TIME 3 DISC NUMBER

1 BS ON

2 BS OFF

1 RI ON

RI OFF ChH 10

SOURCE VOLUME

VOLUME VOLUME 3
REPEAT/RANDOM REPEAT/RANDOM

RPT DISC

READY 14 NO DISC ERROR-

RPT DISC

3 PAUSE/SCAN

2 DRDM

REPEAT/RANDOM RDM 1 PAUSE/SCAN PAUSE

PAUSE/SCAN

2 DSCN

PAUSE/SCAN SCAN

AUDIO AUDIO

FAD FADER

BAL AUDIO AUDIO FAD F15 EQ-L FIE LOUD SLA 3 FADFAD R

SLA BAND 2

BAL L9 BAL R9

CUSTOM 1 H

SPR-BASS POWERFUL NATURAL VOCAL CUSTOM EQ FLAT
AUDIO AUDIO EQ-L/EQ-M/EQ-

2 EQ-L

3 EQ-M EQ-H

+6 -6

CUSTOM EQ FLAT EQ FLAT

CUSTOM

CUSTOM EQ POWERFUL SPR -BASS NATURAL FLAT VOCAL CUSTOM EQ

LOUD LOUD ChH 14

LOUD M ID HI

LOUDNESS

SLA SLA
AUDIO AUDIO 3 250(Hz) FIE FIE FIE 5

SLA+4 SLA-4

AUDIO AUDIO 3 MINUTE 3
SOURCE AUDIO AUDIO FM STEP AM STEP TIME AUX BAND AUDIO

AUDIO AUDIO 2 3

STEP FM100 FM
1 AUDIO AUDIO AM STEP AM9 AM
SOURCE SOURCE AUX AUX AUX

AUX AUX AUX

PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, California 90801, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.05.11 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia TEL: (03) 9586-6300 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411 PIONEER ELECTRONICS DE MEXICO, S.A. de C.V. San Lorenzo 1009 3er. Piso Desp. 302 Col. Del Valle Mexico, D.F. C.P. 03100 TEL: 5-688-52-90
Published by Pioneer Corporation. Copyright 2001 by Pioneer Corporation. All rights reserved. Publication de Pioneer Corporation. Copyright 2001 Pioneer Corporation. Tous droits de reproduction et de traduction rservs. Printed in Malaysia Imprim en Malaisie

<KSNNN/01G00001>

<CZR2946-B/JS> ES

Response (dB)

Pioneers innovative Auto Time Alignment automatically shifts the soundstage in front of listeners, and brings out vocals in the process. First, a microphone at the listening point measures the time that the sound from each speaker takes to reach the listener (rather than listenerto-speaker distance), accurately accounting for sound reflection and absorption. Then, output timing is automatically adjusted for more expansive effect.
Auto Time Alignment Adjustment Example
After adjustment After adjustment: Subtle nuance reproduced.

Multi-CD Players

Before adjustment 20 Frequency (Hz) 20 k
Before adjustment: Rough frequency response curve; unclear overall sound.

Cassette Players

Time Alignment Image
ODR & Pure Component Systems
Auto TA & EQ: Checking Subwoofer (DEH-P80RS)
Auto TA & EQ: Measuring Speaker (DEH-P80RS)
Auto TA & EQ: Adjusting EQ (DEH-P80RS)
Digital delay processing makes all speakers sound as if they are virtually equidistant from the listener, for a clearer, front-focused soundstage.

DEH-P8850MP

4 - Channel High-Power WMA/MP3/A AC/CD Receiver
With an unprecedented full-color OEL display, multi-format digital file playback and versatile DSP, the leading face among Pioneer head units has a kaleidoscopic array of entertaining capabilities.
Full-color dot-matrix OEL (Organic EL) display iTunes AAC playback WAV file playback iPod adapter ready Burr Brown D/A Converter Built-in DSP EEQ 5-mode preset equalizer 2-mode custom preset equalizer Auto EQ BBE digital sound processing* Digital listening position selector Auto time alignment BMX (Bitmetric Equalizer) L/R common 16-band digital graphic equalizer 2-way crossover: HPF/LPF ASL (Auto Sound Levelizer) Auto-slide face Rotary Commander 3 RCA preouts (front + rear + subwoofer) Level indicator Spectrum analyzer Multi-language display (English/Spanish/Portuguese)
*BBE: Licensed by BBE Sound, Inc. under USP4638258 and 4482866. BBE and BBE symbol are registered trademarks of BBE Sound Inc.
CD CONTROL 3 RCA BUILT-IN DSP PC-LINK READY CD TEXT
SUPERTUNER IIID HI-VOLTAGE PREOUT EEQ BBE DIGITAL DIN-D
Finding the sweet spot or optimal listening position is complicated by sounds reflection and damping, as well as variable speaker positioning in the irregularly shaped confines of a car. Such conditions tend to degrade frequency characteristics. Auto EQ helps you enjoy the best sound quality you can get in a car, using a microphone to monitor acoustic conditions, then automatically setting frequency response curve equalization. Its like having a sound engineer customize your in-car sound system.

CD CONTROL BUILT-IN DSP CD TEXT

DOLBY B NR EEQ 2-DIN

SUPERTUNER IIID DIGITAL-SFC
1 RCA selectable BBE DIGITAL
dimensions/combinations exactly as you like. This mode can memorize adjusted preset curves by 3-band parametric equalizer* settings for each source.
*Bass/mid/treble equalizer for DEH-2850MP and DEH-1850.
3-Way Network Mode/Standard Mode

DEH-P80RS FH-P9200MP

You can switch among five preset equalization curves* (Super Bass/ Powerful/Natural/Vocal/Flat) simply by pushing an EQ button. Each of these settings boosts bass and high-frequency ranges in ways that suit the music best.
*Dynamic/Powerful/Natural/Vocal/Flat in the DEH-2850MP and DEH-1850.
2-Way Crossover (HPF/LPF)
DEH-P8850MP DEH-P80RS DEH-P6850MP FH-P9200MP DEH-P5850MPH FH-P500 0MP DEH-P4850MPH FH-P420 0MP DEH-3850MPH
Systems linking a DEH-P80RS or FH-P9200MP head unit with external amplifiers gain the versatility to operate in either of two modes: Standard mode, with preouts driving front, rear and subwoofer channels, and 2- or 3-way speakers typically at front and rear; or Network mode, using low-, mid- and high-frequency (rather than front, rear and subwoofer)
channels. Cut-off frequency, filter slope, level and phase is adjustable for each channel, so output from component woofers and tweeters can be tailored to optimize acoustic staging and overall sound performance. Network modes integration of Auto Time Alignment for the DEH-P80RS particularly adds to the flexibility of tuning and other operating controls.
2-Mode Custom Preset Equalizer
DEH-P8850MP FH-P420 0MP DEH-P6850MP DEH-P80RS FH-P9200MP FH-P500 0MP
Our most feature-loaded models allow extra EEQ flexibility with selectable HPF (High Pass Filter) and LPF (Low Pass Filter). Head units of these systems can perform as amplifiers or separate crossover units for easier system control, particularly of low-frequency signals.
3-Mode Selectable Loudness
DEH-P6850MP DEH-P5850MPH DEH-P4850MPH DEH-3850MPH KEH-P4025
Built-in 50 W 4 -Channel High-Power MOSFET Amplifier
DEH-P8850MP DEH-2850MP FH-P420 0MP DEH-P6850MP DEH-1850 KEH-PDEH-P5850MPH DEH-P80RS DEH-P4850MPH FH-P9200MP DEH-3850MPH FH-P500 0MP
To minimize voltage loss in its head unit amplifiers, Pioneer built in high-performance Power MOSFET integrated circuitry that processes signals efficiently at 50 W 4 maximum total output. High-speed MOSFET switching reduces distortion to virtually nothing at high frequency ranges, thanks to superior characteristics of linearity

For RS and PRS Power Amplifiers
Current Feedback Type Power Amplifier Circuitry* For high-resolution sound amplification, this circuitry uses MOSFET** in the final output stage for extremely high slew rate that results in quicker input signal response, wide range characteristics and low distortion.
*RS-A9/RS-A7/PRS-A700/PRS-A500 **PRS-D5000SPL/PRS-D3000SPL/PRS-A700/PRS-A500
Signal output of each speaker can be calibrated in 1/20,000-second* increments, for optimal phasing of sound from the system, according to listener position. Precise equalization and suppression of frequency response disturbance makes for a clearer, more focused soundstage.

*RS-A9: 1/40,000-second

L/R Independent Power Supply* This new circuit designs L/R independent symmetric layout improves channel separation. Independently mounted large DC-DC converter power supply directs electric current more effectively, with superior stability.
*RS-A9/RS-A7/PRS-A700/PRS-A500
31-Band L/R Independent Digital Equalizer This finely tunes equalization of the sound curve and independently adjusts for slight differences between left and right channel frequency response for truer, clearer sound.
50 W 4 (4 )/150 W 2 (4 )/ 75 W 4 (2 ) (continuous power) 100 W 4 (4 )/300 W 2 (4 ) (max. power) Bridgeable 2/3/4-channel capability Current feedback amplifier L/R independent power supply Variable LPF/HPF (40120 Hz, 12 dB/oct.) for A and B channels High-voltage input level control (200 mV6.5 V) Input level/gain control (L/R independent) Low load impedance capability (28 ohm)
Reference Sound Systems DEH-P80RS
Component CD Player/Receiver

TS-C171PRS

17-cm Packaged Component Speaker System

TS-C131PRS

13-cm Packaged Component Speaker System
CD CONTROL HI-VOLTAGE PREOUT BBE DIGITAL
SUPERTUNER IIID+ BUILT-IN DSP CD TEXT

3 RCA EEQ DIN-D

White dot-matrix OEL (Organic EL) display Aluminum-plated face panel iTunes AAC playback WAV file playback iPod adapter ready Burr Brown advanced segmenttype D/A Converter Built-in DSP EEQ 5-mode preset equalizer 2-mode custom preset equalizer Auto EQ Auto EQ for 3-way network BBE digital sound processing Digital listening position selector
Auto time alignment BMX (Bitmetric Equalizer) L/R independent 16-band digital graphic equalizer L/R independent 2-way crossover: HPF/LPF L/R independent 3-way crossover: high/mid/low ASL (Auto Sound Levelizer) Auto-slide face Rotary Commander 3 gold-plated RCA preouts (front + rear + subwoofer) Level indicator Spectrum analyzer Multi-language display (English/Spanish/Portuguese) 200 W MAX.

Rear view

2-DIN Players 2-DIN Players Multi-CD Players Multi-CD Players
150 W MAX. 50 watts nominal power handling 2532,000 Hz, 88 dB, mm 13-cm woofer 30 watts nominal power handling 3532,000 Hz, 88 dB, mm

PRS-D4000F

1200 W MAX. LPF HPF RCA INPUT/OUTPUT SPEAKER INPUT
Class-FD 4 -/2- Channel Bridgeable Amplifier
75 W 4 (4 )/300 W 2 (4 )/ 150 W 4 (2 ) (continuous power) 150 W 4 (4 )/600 W 2 (4 ) (max. power) Bridgeable 2/3/4-channel capability Variable LPF/HPF (40120 Hz, 12 dB/oct., 4 ch) High-voltage input level control (400 mV6.5 V) Load impedance capability (28 ohm) Gold-plated RCA input and output terminals Gold-plated screw-type speaker terminals All terminals placed on one side Removable terminal/settings cover Speaker level input (1.6 V26 V) Speaker line input turn-on sensor High-efficiency MOSFET output section High-performance balanced isolator input circuit Aluminum die-cast heatsink
17-cm woofer Shallow mount adapters included
Common Features 3-layer aramid fiber with IMPP composite cone High density micro fiber surround for smoother response Short voice coil & wide magnetic field design for symmetric & linear cone motion Dual OFC short ring for reduced distortion Aluminum die-cast bottom hold one-piece rigid chassis Aluminum die-cast center plug 28-mm lightweight soft-dome tweeter
Cancel magnet design for extremely high density magnetic field Rear chamber for lower crossover frequency Aluminum die-cast tweeter chassis Surface (angled), flush or invisible tweeter mounting kit Audiophile-grade outboard crossover network included with 12 dB/oct. LPF/HPF Protection circuit and 3-step tweeter level adjustment Gold-plated screw-type terminals
TS-C171PRS/TS-C131PRS Tweeter Specifications Dimensions (W H D): 55 27.1 mm (surface mount) Mounting depth: 12.2 mm Cut-out dimensions: 47 mm *See page 35 for woofer dimensions.

PRS Speakers

PRS-D2000T
Class-FD 2- Channel Bridgeable Amplifier
150 W 2 (4 )/600 W 1 (4 )/ 300 W 2 (2 ) (continuous power) 300 W 2 (4 )/1,200 W 1 (4 ) (max. power) Bridgeable 1/2-channel capability Variable LPF/HPF (40120 Hz, 12 dB/oct., 2 ch) High-voltage input level control (400 mV6.5 V) Load impedance capability (28 ohm) Gold-plated RCA input and output terminals Gold-plated screw-type speaker terminals All terminals placed on one side Removable terminal/settings cover Speaker level input (1.6 V26 V) Speaker line input turn-on sensor Bass Boost Remote (50 Hz, 0/+6/+9/+12 dB) High-efficiency MOSFET output section High-performance balanced isolator input circuit Aluminum die-cast heatsink

TS- C171PRS

TS- C131PRS
Pioneer advances the proud heritage of its IASCA (International Auto Sound Challenge Association) award-winning Premier Reference Series. These speakers superior response, linearity and sound directivity improve low- and mid-frequency reproduction, while making highs and lows sound smoother and more open.
PRS Speaker (Tweeter) Cross Section
Absorbent Protector Cancel magnet Aluminum flange and back cabinet OFC short ring Back chamber
Micro Fiber Surround: Maximum Musical Response The strong, high-density micro fiber material surrounding the woofer of a PRS speaker is very light and low in resistance and internal loss characteristics. This enhances linearity of the short winding length of the voice coil, thereby optimizing efficiency. Moreover, micro fiber doesnt stretch so it does a better job than other materials to control vibration and enables higher power input. The result is faster response and more accurate bass reproduction that allows all music to be heard to greatest advantage.
0.6 0.5 Better sound Rubber Micro fiber

PRS-D1000M

1200 W MAX. LPF RCA INPUT SPEAKER INPUT

Soft-dome diaphragm

Internal loss
0.4 0.3 0.2 0.1 Urethane 0 0.2 Cloth 1.2 1.4
Normal mode: 400 W 1 (4 )/ 600 W 1 (2 ) (continuous power) Hi-current mode: 150 W 1 (4 )/ 300 W 1 (2 )/600 W 1 (1 ) (continuous power) 800 W 1 (4 )/1,200 W 1 (1 , 2 ) (max. power) Variable LPF (40240 Hz, 18 dB/oct.) High-voltage input level control (400 mV6.5 V) Load impedance capability (18 ohm) Gold-plated RCA input terminals Gold-plated screw-type speaker terminals All terminals placed on one side Removable terminal/settings cover Speaker level input (1.6 V26 V) Speaker line input turn-on sensor Bass Boost Remote (50 Hz, 0/+6/+9/+12 dB) Subsonic filter (20 Hz, 18 dB/oct.) SYNC control High-efficiency MOSFET output section High-performance balanced isolator input circuit MASS (Multiple Amplifier Synchronization System) Aluminum die-cast heatsink

Main magnet

Polyester fiber (polyurethane resin)
PRS Speaker (Woofer) Cross Section
3-layer aramid fiber with IMPP composite cone Micro fiber surround Magnified cross section view Aluminum die-cast center plug
0.4 0.6 0.8 1.0 Specific gravity
Dual OFC short ring Aluminum die-cast bottom hold one-piece rigid chassis Overhung thick plate

Power up your passion for music. Pioneers four-, two- or mono-channel amplifiers offer all the range you need to drive your speakers and subwoofer to peaks of performance. Bass Boost enhances deep, rock-solid presence at the low end of the frequency range. All circuitry is engineered for optimal efficiency to maintain smooth signal path and pure sound integrity.

GM-5200T

GM-3200T
760 W MAX. LPF RCA INPUT SPEAKER INPUT 300 W MAX. LPF RCA INPUT SPEAKER INPUT
125 W 2 (4 )/380 W 1 (4 )/ 190 W 2 (2 ) (continuous power) 250 W 2 (4 )/760 W 1 (4 ) (max. power) Bridgeable 1/2/3-channel capability LPF (80 Hz, 12 dB/oct.) High-voltage input level control (400 mV6.5 V) Input level/gain control Low load impedance capability (28 ohm) RCA input terminals Screw-type speaker terminals Large screw-type power/ground terminals Speaker level input (1.6 V26 V) Bass Boost (50 Hz, 0/+6/+12 dB) PWM regulated power supply with MOSFET switching High-performance balanced isolator circuit Black heatsink
60 W 2 (4 )/150 W 1 (4 )/ 75 W 2 (2 ) (continuous power) 120 W 2 (4 )/300 W 1 (4 ) (max. power) Bridgeable 1/2/3-channel capability LPF (80 Hz, 12 dB/oct.) High-voltage input level control (400 mV6.5 V) Input level/gain control Low load impedance capability (28 ohm)

2 parallel

RCA input terminals Screw-type speaker terminals Large screw-type power/ground terminals Speaker level input (1.6 V26 V) High-performance balanced isolator circuit Black heatsink
2-Channel Amplifier Connection Examples

Bridged Mono

Bridged mono Subwoofer TS-W306C

8 series

Stereo

Bridged Mono 4

Bridged mono
Stereo Subwoofer GM-5200T 2 TS-W3004SPL GM-5200T TS-W3004SPL 4
4-Channel Amplifier Connection Examples

Bridged Stereo

TS-W306C Bridged connection L R Stereo GM-6200F L R Subwoofer GM-6200F Bridged connection TS-W306C Bridged connection

3-Channel Mode Bridged

Full-range speakers

Multi-Channel System

2-preout head unit Front A-ch. Rear B-ch. Nonfading RCA input RCA output GM-6200F Bridged connection GM-5200T
6" 9" speakers LPF TS-W306C

TS-W306C

GM-D510M GM-7200M

Mono Amplifier

800 W MAX. RCA INPUT LPF SPEAKER INPUT

GM-6200F

LPF SPEAKER INPUT HPF 1000 W MAX. LPF RCA INPUT

*Output for A-channel

Current (A)
250 W 1 (4 )/360 W 1 (2 ) (continuous power) 500 W 1 (4 )/800 W 1 (2 ) (max. power) Variable LPF (40240 Hz, 12 dB/oct.) High-voltage input level control (400 mV6.5 V) Input level/gain control Low load impedance capability (28 ohm) RCA input terminals Screw-type speaker terminals Large screw-type power/ground terminals Speaker level input (1.6 V26 V) Bass Boost (50 Hz, 0/+6/+12 dB) PWM regulated power supply with MOSFET switching High-performance balanced isolator circuit Black heatsink

Subwoofer Front or rear speaker A Class-D amplifier needs only 2/3 of the current of a conventional amplifier, so the power supply to both subwoofer and front and rear speakers is more stable. As a result, the sound quality will not be affected, so you can enjoy a very clean sound output without distortion.
RCA inputs and outputs (GM-6200F)
Oversized power ground terminals (GM-6200F)
PRS-D0SPL GM-520 0T PRS-D3000SPL PRS-D2000T PRS-D1000M GM-720 0M
Power is just one defining characteristic of outstanding amplification. Precision and balance are also crucial to get the sound you want. By letting
you set the optimal bass level for each speaker and subwoofer connected to a system, Bass Boost gives you more precise control over how your music sounds overall. Select between 0- to 12-dB level settings that can be adjusted in 2-dB steps, according to preference and music style.
The Class-D amplifiers PWM (Pulse Width Modulator) modulates the original audio input signal with another signal which has a much higher fixed frequency. The result is a digital signal which contains the input signal and a band of frequency components around the modulation frequency. A LPF (Low Pass Filter) will then filter out the 350 kHz frequency pulses and the resulting amplified output signal is then sent to the subwoofer and/or speakers. The advantage of this amplification is that the power output FETs operate like a switch that is on or off: when on, the FET acts like a closed switch, no voltage runs through its terminals, and no wasted power is transformed into heat.

Class-D Amps

Subwoofer
Pulse Width Modulator Method
Input signal +V Signal amplitude 0 transfer to Pulse Width V Pulse Width Modulation Circuit Output signal
A LPF (Low Pass Filter) cuts off the high frequency

S u b w o o f e r s

Great sound needs a solid anchor to extend the low-frequency end of the sonic spectrum. Pioneer goes to the greatest extremes for all its subwoofers to share the winning characteristics of smooth response, minimal distortion, maximum output and absolute fidelity. The result is bass that reliably rocks you to your core.

TS-W3004SPL

3000 W MAX.
30 -cm (12" ) Component Subwoofer

TS-W2504SPL

65-mm (2-9/16") large titanium voice coil bobbin Double-stack magnet assembly (3.11 kg/110 oz.) Spoke grille compatible (UD-G306) 750 watts nominal power handling 18700 Hz, 89 dB, 24.149.5 l (0.851.75 cu. ft.), mm

Aluminum die-cast basket

40.0 Fxd XY

Steel basket

Sec. 200 m
Improved Chassis Rigidness
60 dB 170 Hz Conventional basket Bottom hold basket Reduced backward motion

Glass cloth

Shallow-Type Subwoofers TS-SW1241D

1400 W MAX.

Sealed Enclosure Type Subwoofers
Sealed Enclosure Type (C-type) subwoofers are designed to deliver maximum bass performance when used in a speaker cabinet of appropriate internal volume.
Double-cone structure with airsuspension control system Reinforced cone using C-shaped nodes structure Composite IMPP double cone woofer using interlaced carbon and ultra long glass fiber 3-layer fiber woven radial surround with M-shape cross-section 4-layer, long voice coil Glass cloth voice coil bobbin High-energy strontium magnet Aluminum dust cap T-pole yoke design Extended and vented pole yoke Rubber gasket Cast aluminum basket with fin-shaped design 350 watts nominal power handling 181,000 Hz, 88 dB, 14.228.3 l (0.501.0 cu. ft.), 329.0 97.9 mm
30-cm (12") Component Subwoofer (Sealed Enclosure Type)

TS-W306DVC

1000 W MAX.
30-cm (12") Component Subwoofer (Dual Voice Coil Type)

TS-SW1041D

Composite IMPP cone using interlaced aramid fiber 3-layer, fiber woven radial surround Single conex damper with damper ring 4-layer, long voice coil (TS-W306C) Dual 4-layer, long voice coils (DVC) () (TS-W306DVC) 12-slit, 55-mm (2-3/16") aluminum voice coil bobbin
Dual mass high-power magnet (2.4 kg, 83 oz.) Extended and vented pole yoke Silver binding posts Spoke grille compatible (UD-G306) 400 watts nominal power handling 18500 Hz, 89 dB, 24.149.5 l (0.851.75 cu. ft.), mm
TS-W306C Subwoofer with optional UD-G306 Spoke Grille
Double-cone structure with airsuspension control system Reinforced cone using C-shaped nodes structure Composite IMPP double cone woofer using interlaced carbon and ultra long glass fiber 3-layer fiber woven radial surround with M-shape cross-section 4-layer, long voice coil Glass cloth voice coil bobbin
High-energy strontium magnet Aluminum dust cap T-pole yoke design Extended and vented pole yoke Rubber gasket Cast aluminum basket with fin-shaped design 250 watts nominal power handling 201,000 Hz, 87 dB, 9.919.8 l (0.350.7 cu. ft.), 282.0 89.6 mm

13-cm woofer/25-mm midrange/10-mm tweeter 35 watts nominal power handling 4032,000 Hz, 90 dB, 155 78.3 mm

TS-E1076 TS-D691S

350 W MAX. 6" 9" (cm) woofer/28-mm dome tweeter Dual-layer KEVLAR Brand Fiber* with Rigilite IMPP composite cone woofer Single conex damper Copper ring Extended pole yoke design Butyl rubber surround for smoother response Glass-imide voice coil bobbin Lightweight balanced dome tweeter with neodymium magnet Wave guides for dispersion control Rear chamber for lower crossover frequency Built-in crossover network: LPF; 12 dB/oct. (for woofer)/HPF; 12 dB/oct. (for tweeter) Newly-designed full-depth basket boasting much higher compressive strength and better damping Full-depth basket for rich bass response Top/bottom mount 80 watts nominal power handling 2232,000 Hz, 91 dB, 118 mm
*DuPont and/or DU PONT-TORAY CO., LTD. produce KEVLAR brand fiber. DuPont and KEVLAR are trademarks and registered trademarks of DuPont or its affiliates and are used under license by Pioneer.

10 -cm 2-Way Speaker

TS-E1695

16 -cm 3-Way Speaker

6" 9" 2-Way Speaker
Cassette Players ODR & Pure Component Systems
110 W MAX. 220 W MAX. 10-cm woofer/25-mm tweeter KEVLAR Brand Fiber/pulp composite cone woofer Butyl rubber surround for smoother response Heat-resistant long voice coil Pure magnesium balanced dome tweeter with neodymium magnet Round/Square compatible frame 25 watts nominal power handling 4530,000 Hz, 90 dB, mm 16-cm woofer/30-mm dome midrange/10-mm dome tweeter 3D magnesium hybrid cone woofer Pure titanium dome midrange with ultra-slim neodymium magnet and magnetic fluid Triangular butyl rubber surround for smoother response GM tabs for 16-cm/17-cm compatibility 60 watts nominal power handling 3032,000 Hz, 91 dB, mm

TS-D161S

16 -cm 2-Way Speaker

260 W MAX.

16-cm woofer/28-mm dome tweeter Dual-layer KEVLAR Brand Fiber with Rigilite IMPP composite cone woofer Single conex damper Copper ring Extended pole yoke design Butyl rubber surround for smoother response Glass-imide voice coil bobbin Lightweight balanced dome tweeter with neodymium magnet Wave guides for dispersion control Rear chamber for lower crossover frequency Built-in crossover network: LPF; 12 dB/oct. (for woofer)/HPF; 12 dB/oct. (for tweeter) Newly-designed full-depth basket boasting much higher compressive strength and better damping Full-depth basket for rich bass response 60 watts nominal power handling 2732,000 Hz, 90 dB, mm

TS-A6971E

350 W MAX.
High-Power Series Speaker TS-6975

300 W MAX.

Cross-Axial Speaker TS-2150

200 W MAX. CROSS-AXIAL

TS-A6961E
Butyl rubber surround for smoother response PET cone midrange with magnetic fluid and urethane surround Full-depth basket for longer excursion and richer bass 80 watts nominal power handling 2530,000 Hz, 93 dB, 119 mm
6" 9" 3-Way High-Power Speaker
20 -cm Cross-A xial 3-Way Speaker
260 W MAX. Glass-imide voice coil bobbin for higher power handling capabilities Single conex damper with damper ring PET film dome tweeter
6" 9" (cm) rigid oven cone woofer 57-mm PI cone midrange 32-mm PEI (poly-ether imide) balanced dome tweeter with magnetic fluid 80 watts nominal power handling 2832,000 Hz, 93 dB, 123.2 mm 20-cm IMPP composite cone woofer/ 25-mm titanium dome midrange/ 20-mm ceramic up-dome tweeter Cross-Axial engineering for excellent sound quality 50 watts nominal power handling 2828,000 Hz, 91 dB, 176 mm
Common Features 6" 9" (cm) woofer/57-mm cone midrange/18-mm dome tweeter Composite IMPP cone woofer using interlaced aramid fiber
PET cone midrange with magnetic fluid Shallow-depth basket for increased installation versatility 40 watts nominal power handling 2828,000 Hz, 93 dB, 105 mm

TS-A2511

400 W MAX.

TS-A2011 TS-A2511

TS-G Series Speakers

25 -cm 3-Way Speaker

25-cm woofer/66-mm cone midrange/18-mm dome tweeter 100 watts nominal power handling 2530,000 Hz, 93 dB, mm
Designed to deliver exceptional value, TS-G speakers combine superior power handling with cone design that is both attractive and tuned for performance. The great sound of these speakers is worthy of their innovative IMPP cone technology. Designed for shallow mounting, these universal speakers can suit most installation situations.

TS-A2011

Glass-imide voice coil bobbin for higher power handling capabilities PET film cone midrange with magnetic fluid PET film dome tweeter 350 W MAX.

TS-G1641R

160 W MAX.

16-cm 2-Way Speaker

Common Features Composite IMPP cone woofer using interlaced aramid fiber Butyl rubber surround for smoother response
20-cm woofer/66-mm cone midrange/18-mm dome tweeter 90 watts nominal power handling 2530,000 Hz, 93 dB, mm
30-mm PEI (poly-ether imide) balanced dome tweeter 3522,000 Hz, 91dB, mm

TS-G1611R

Increased installation versatility with extra tabs (16-cm/GM 17-cm compatibility) 30 watts nominal power handling 160 W MAX.

16-cm Dual-Cone Speaker

TS-A1681S

16 -cm 4 -Way Speaker

Common Features 16-cm metallic silver IMPP composite cone woofer Shallow basket design for installation versatility

A/V Center Speaker TS-CX7

60 W MAX.

Satellite Speaker TS-STX99

80 W MAX.

TS-C1653

A/V Center Speaker

Satellite Speaker
16-cm woofer/23-mm tweeter 16-cm/GM 17-cm compatible frame 50 watts nominal power handling 3032,000 Hz, 90 dB, mm

TS-C1353

5.7-cm KEVLAR Brand Fiber composite cone full-range speaker Center speaker for 5.1-ch. multi sound reproduction Butyl rubber surround Compact aerodynamic cabinet design
Double neodymium magnet assembly with magnetically shielded circuit design 20 watts nominal power handling 14030,000 Hz, 83 dB, 41 mm
5.7-cm KEVLAR Brand Fiber composite cone full-range speaker Butyl rubber surround for smoother response
Large-diameter voice coil with neodymium magnet 20 watts nominal power handling 9030,000 Hz, 83 dB, 114 mm
13-cm woofer/23-mm tweeter Large-sized DIN frame
50 watts nominal power handling 4032,000 Hz, 90 dB, 171 77.8 mm
Marine Speakers TS-MR2040
20 -cm 2-Way Marine Speaker

TS-MR1640

16 -cm 2-Way Marine Speaker
Common Features Foamed IMPP composite cone woofer Aromatic polyamide fiber soft-dome tweeter Glass-imide voice coil bobbin CCAW long voice coil Butyl rubber surround
High-performance neodymium magnet (tweeter) Flush swivel mounting cup Slant spacer Outboard screw-type crossover (LPF: 6 dB/oct., HPF: 18 dB/oct.)
Aluminum electrolytic capacitor Ferrite core choke coil Heat-reactive poly-switch for tweeter protection
TS-C1653/TS-C1353 Tweeter Specifications Mounting depth: 18.6 mm Cut-out dimensions: 39 mm *See page 35 for woofer dimensions.
20-cm water-resistant IMPP cone woofer Waterproof elastomer surround Conex damper with elastomer water guard Gold-plated tinsel wire and terminals 20-cm glass fiber reinforced plastic deep basket
High-quality UV and corrosion-resistant design Stainless steel mounting hardware 40 watts nominal power handling 2530,000 Hz, 92 dB, mm

16-cm water-resistant IMPP cone woofer Waterproof elastomer surround Conex damper with elastomer water guard Gold-plated tinsel wire and terminals 16-cm glass fiber reinforced plastic deep basket
High-quality UV and corrosion-resistant design Stainless steel mounting hardware 30 watts nominal power handling 3030,000 Hz, 91 dB, 175 84.5 mm
S p e c i f i c a t i o n s

Co m p a r i s o n

Head Units Feature Comparison
RS 80 -P EH D 90 -P EQ RS D 90 -P EX D 7R -D 35 RS 20 -P H 25 KE 40 -P H 7 KE 68 FM X87 CD 12 FM XCD 80 P6 X0 CD 28 P1 P M 00 DE DE HDE HP5 DE D D FH FH FH XCD DE DE DE D D FH FH FH RS 80 -P EH D 90 -P EQ RS D 90 -P EX D 7R -D 35 RS 20 -P H 25 KE 40 -P H 7 KE 68 FM X87 CD 12 FM XCD 80 P6 X0 CD 28 P1 P M 00 XCD DE DE HDE HEH EH EH EH HHHHHH-P -P 42 -P -P -P 42 -P 8 P4 PP4

Features

Features
MULTI-CD CONTROL Scan (disc/track) CD pause Repeat <D = Disc, T = Track, I = ITS> Random play <M = Magazine, D = Disc, I = ITS> Disc title memory <number of titles> CD Text (1) List search <D = Disc, T = Track> Digital compression (2) Dynamic bass emphasis (2) ADPS (Automatic Disc Program Selection): 100 discs ITS (Instant Track Selection) <M = Max. 99 tracks 100 discs> CD PLAYER CD-R/RW playback <S = With skip play> WMA (Windows Media Audio) playback with WMA Tag (3) MP3 playback with ID3 Tag (3) iTunes AAC playback (3) WAV file playback (3) Folder/file list search (CD-ROM) <F = Folder search only> D/A Converters with 8 oversampling digital filter <24 = Multi 24-bit, B = Burr Brown, 1 = 1-bit> Digital direct <C = CD-DA only> Track scan CD pause Track/manual search Disc exist search Repeat (CD-DA: disc/track, CD-ROM: file/folder) <C = CD-DA only, M = Magazine/disc/track> Random play <M = Magazine, D = Disc> Disc title memory (48 titles) CD error code transmission capabilities One-day memory backup Last position memory CD Text List search <F = Folder search only> Digital compression BMX (Bitmetric Equalizer) MD PLAYER 20-bit D/A Converter ATRAC (Adoptive Transform Acoustic Coding) 3 MDLP (MiniDisc Long Play, up to 320 min.) Track scan Repeat (track/disc)/Pause/Random play (disc) Track manual search Title display Title scroll CASSETTE PLAYER Full-logic mechanism Dual-groove SHC head Music search/Blank skip/Repeat Dolby B NR Automatic tape selector for Metal/Chrome Radio intercept Time tape counter TUNER Supertuner IIID+ Supertuner IIID Supertuner III Supertuner BSM (Best Stations Memory) Local seek tuning 24-station (18 FM/6 AM) presets 9 k/10 kHz AM channel spacing switch <9 = 9 kHz only> AUDIO Hi-bit conversion High-power MOSFET 50 W 4 (max.) output 45 W 4 (max.) Gold-plated 8-channel RCA output (high/mid/low/subwoofer) 3 RCA preouts Front + Rear + Non-fading <G = Gold-plated> Front + Rear + Subwoofer <G = Gold-plated> 2 RCA preouts Front + Rear/Front + Subwoofer (selectable) Front + Subwoofer/Front + Non-fading (selectable) RCA preout Subwoofer/Non-fading (selectable) Rear/Subwoofer (selectable) Rear High-voltage preout (V) IP-Bus input/output Optical input/output Optical input (with DEX-P90RS) Frequency change: 96 kHz44.1 kHz DSP/EEQ Built-in DSP (Digital Signal Processor) EEQ (Easy Equalizer) Multi 24-bit Burr Brown D/A Converters

*Chassis dimensions only

Multi-CD Players FH-P4200MP 520,92 CDX-P1280 520,90 170* CDX-P680 520,90 168* CDX-FM1287 170* CDX-FM687 168*
Cassette Players KEH-P4025 0.09 3016,87.5108.0 5301,640 5311,[0.8 V] 50 W 15 KEH-P2035 0.13 3016,000 52

FH-P5000MP 520,92

520,92 2020,90 87.5108.0 5301,640 5311,[0.7 V] 50 W 4 94 17
0.09 0.09 3019,000 3019,(67 w/ Dolby B) 61 (67 w/ Dolby B) 87.5108.0 5301,640 5311,[0.7 V] 50 W 4 87.5108.0 5301,640 5311,[1.0 V] 50 W 4 94 25
87.5108.0 5301,640 5311,[1.1 V] 45 W 15

Power Amplifier Features

G M 2 -7 G M -6 G M -5 G M -3 G M -D RS -A RS -A PR SPR SPR SPR PR PR SD5 PR SS0 D3 S-
Subwoofers & Speakers Specifications
Size TS-W01RS TS-M01RS 25 cm 17 cm 7.7 cm
Bridgeable 2/3/4-channel capability <F = Class-FD> Bridgeable 1/2/3-channel capability <F = Class-FD> Mono amplifier <D = Class-D> Current feedback amplifier L/R independent power supply Full balanced system (bridgeable connection) High-performance 32-bit floating binary point type DSP Built-in DSP (Digital Signal Processor) (FIR) Multi 24-bit Burr Brown D/A Converters Variable LPF/HPF (40120 Hz, 12 dB/oct., 4ch) Variable LPF/HPF (40120 Hz, 12 dB/oct.) Variable LPF (40240 Hz, 18/24 dB/oct.) Variable LPF (40240 Hz, 24 dB/oct.) Variable LPF (40240 Hz, 12 dB/oct.) LPF/HPF (80 Hz, 12 dB/oct.) for A and B channels LPF (80 Hz, 12 dB/oct.) High-voltage input level control (400 mV6.5 V) High-voltage input level control (200 mV6.5 V) High-voltage input level control (125 mV6.5 V) Input level/gain control Bass level control (22 to +12 dB) Low load impedance capability (4 ohm, 28 ohm allowable) Low load impedance capability (18 ohm) Optical digital input 3 optical digital outputs (mid/low/subwoofer) IP-Bus input/output RCA input and output terminals RCA input terminals Screw-type speaker terminals Large block-type speaker terminals Large screw-type power/ground terminals Large block-type power/ground terminals Speaker level input (1.6 V26 V) Speaker line input turn-on sensor Variable Bass Boost (40120 Hz, 0 to +12 dB) <R = Remote> Bass Boost (50 Hz, 0/+6/+9/+12 dB) <R = Remote> Subsonic filter (20 Hz, 18 dB/oct.) SYNC control PWM regulated power supply with MOSFET switching High-performance balanced isolator circuit High-efficiency MOSFET output section MASS (Multiple Amplifier Synchronization System) Sound master clock DAC volume All terminals placed on one side Removable terminal/settings cover Copper-plated chassis Black heatsink Aluminum die-cast heatsink