KRP-500M

50-Inch Class High-Definition 1080p Flat Panel KURO Monitor
Pioneer KURO monitors bring cutting-edge technology and flawless design together for an experience unlike anything youve ever imagined. Equipped with a host of options for seamless system integration and award-winning black level performance, the Pioneer KURO monitors are an installers dream.
High-Definition 1080p Resolution (1920 x 1080p) 50" Class (49.85" Diagonal)/ 16:9 Wide Screen Aspect Ratio 2 Independent HDMI 1.3 Inputs Ultra-Thin Cosmetic Design at Just 2.5" Deep

Simulated Screen

KURO Features
New Optimum Mode automatically analyzes and adjusts video
After Image Reduction Function Orbiter (Off / Mode 1 / Mode 2) Auto Size (Off / Natural / Wide-Zoom) Side Mask Detection (Mode 1 for black side masks /
content and room light conditions for optimum picture and performance
New Room Light Sensor Image Orbiter (Off / Mode 1 / Mode 2) New Energy Save Mode (Picture Off / Standard / Save 1 / Save 2) Picture Adjustment Comparison (compare before / after picture
Mode 2 for black & illustrated side masks)
Side Mask Brightness Sync (Fixed / Auto) Video Pattern (White Bar) Game Control Preference (AV Selection: only Game) (Off / On) Room Light Sensor (Off / On)
images while adjusting settings)
2 Independent HDMI 1.3 inputs with KURO Link and ability to accept

1080p True24/60Hz signal

1 DVI w/HDCP Standard 3:2 (60Hz) and Advanced PureCinema with 3:3 Pulldown
Videoprocessing Technology
Picture Detail Settings DRE Picture, Black Level, ACL, Enhance

(72Hz), Smooth (60Hz)

Remote Control: Illuminated / Preset Mode / Learning Mode
Mode, Gamma and CTI (No menu items for these functions)
Noise Reduction Setting 3 DNR, Field NR, Block NR, Mosquito NR Color Detail Settings Color Temperature (5 Pre-settings or Manual

Picture Settings

A/V Selection memory 8 options for viewing preferences:
adjustment), CTI, Color Management
3DYC (Off / High / Mid / Low) IP Mode (1 / 2 / 3) Drive Mode (1/ 2 / 3)
Optimum/ Standard / Dynamic / Movie / Pure / Sport / Game / User (PC input: only Standard & User)
Aspect Ratio Control 13 positions: Auto* / FULL (for SD & PC) /
FULL1 (only for HD) / FULL2 (only for HD) / FULL 14:9* / Dot by Dot*/ Zoom* / CINEMA* / CINEMA 14:9* / 4:3 / WIDE (only for SD)* / WIDE1 (only for HD)* / WIDE2 (only for HD)* *Except PC signal
Advanced Picture-in-Picture (4 positions), Picture-side-Picture
(3patterns)/ SWAP and Still Picture capability
Video & Audio Connectivity
Inputs 2 Independent HDMI 1.DVI w/HDCP 1 Component 1 Composite 1 RS232-C LAN (10/100 Base T Output IR Repeater Speaker Out

INTEGRATED TECHNOLOGIES

Carton Dimensions
(W x H x D): 53 x 34-11/16 x 13-31/32 Weight: 90.2 lbs

Ethernet) for IP Control

PC Stereo Mini Audio In (RCA)

Product Dimensions

Panel (W x H x D): 48-17/32 x 28-15/32 x 2-17/32 Panel w/Speaker (W x H x D): 55-3/32 x 28-15/32 x 2-17/32 Panel Weight: 69.2 lbs Panel Weight w/Speaker and Stand: 82.5 lbs

Sound Technology

9 Watt + 9 Watt Stereo Digital Amplifier w/optional 2-Way Stereo

Speakers

Specifications and design subject to modification without notice.

012562899480

55-3/32" 48-17/32" 19-17/32" 2-17/32" 55-3/32" 48-17/32"

28-15/32"

31-1/32"

11-13/16"

2-9/16"
Optional stand (KRP-TS02) and speakers (KRP-S04) sold separately.

11-27/32"

Plasma Display Systems display images consisting of hundreds of thousands of minute pixels (light emitting cells), and there is a possibility that some pixels may be inactive, flashing or continually illuminated. Plasma Display Systems are made of glass; be sure to secure it from damage from impact. Plasma Display Systems, while in use, may generate some functional sounds, for example: fan motor noise, and electrical circuit humming/glass panel buzzing. All phosphor-based display systems (CRT Television Systemsboth direct view and projection televisionsas well as plasma display systems) may develop image retention, sometimes called burn-in if permanent. Recommended guidelines are as follows: Do not display still images for long periods (such as fixed images from PC or TV game equipment, and/or time of day indicator or channel logo display). Do not display content in the 4:3 aspect ratio (black or gray bars on left and right side of content) or letter-box content (black bars above and below of content) for extended periods of time, or use either of these viewing modes repeatedly within a short period of time. This Plasma Display System is equipped with multiple wide-screen viewing modes; use one of these screen modes to fill the entire screen with content.

Displaying dark images after displaying still images for a period of time may cause image retention. In most cases, the image retention can be corrected by displaying bright images for a similar period of time. However, if your Plasma Display System displays still images for additional long periods of time, image retention may be irreparable. Plasma Display Systems emit slight amounts of IR (Infrared) emission through luminous discharge technology. This IR emission is not harmful to living organisms, but may interfere with the operation of remote controls for other equipment, or cause static in equipment using IR signals (such as cordless headphones or cordless microphones). PIONEER and the Pioneer logo are registered trademarks of Pioneer Corporation. HDMI and the HDMI logo are registered trademarks of HDMI Licensing, LLC.
2008 Pioneer Electronics (USA) Inc.

Chapter_01.fm Page 8 Thursday, June 19, 2008 2:54 PM
KRP-500M & KRP-600M Connections
Back of the Panel (KRP-600M)

(upper bank)

Viewed from the underside of the display

(KRP-500M)

12345678

(from left to right)

INPUT 1 terminal (Video) INPUT 2 terminals (Component, Y, CB/PB, CR/PR) INPUT 3 terminal (Analog RGB) INPUT 4 terminal (DVI-D) INPUT 5 terminal (HDMI) INPUT 6 terminal (HDMI) LAN terminal
RS-232C terminal (for factory use) IR REPEATER OUT terminal AUDIO 1 R/L (Audio 1) AUDIO 2 (Audio 2) SPEAKER (R) terminal SPEAKER (L) terminal AC In terminal
Terminals on the rear panel are common to both models.