Before Using 5

In Case of Trouble
Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station.
Preventing the Battery from Becoming Exhausted
When using this product, be sure your car engine is running. If you use this product when your engine is not running, the battery will become exhausted.
Changing the Mode Switch Setting
Use a pen tip or other pointed instrument to select the correct setting of the Mode switch on the right side of this unit for the component you are using it with. After changing the setting, be sure to press the RESET button. (See page 6.)
(1) When using this product with a Pioneer component featuring an IP-BUS input

Select the IP-BUS mode.

(2) When using this product with a Pioneer component that does not feature an IP-BUS input, or another companys product
Select the STAND ALONE mode.

Condition Memory

This function memorizes audio language, subtitle language, angle number, audio output (L, R) and aspect ratio made during disc playback for up to 30 discs. Without any special operations, the final setting details during playback of a disc are memorized. The next time a disc is played, the previous settings are automatically applied. Note:
With some discs, audio language and subtitle language are automatically specified, in which case condition memory does not function. When the number of discs exceeds 30, settings for the latest disc replace those for the least recent disc.
Resetting the Microprocessor
When the ignition switch is turned OFF, pressing the RESET button lets you reset the microprocessor to its initial settings without changing SET UP MENU settings, Condition Memory and other settings. Press the RESET button in the following cases. After changing the setting of the Mode switch on the right side of the unit. When this unit fails to operate correctly. When strange (incorrect) messages appear on the display.

Resetting

1 Turn the ignition switch OFF. 2 Press the RESET button.
Use a pen tip or other pointed instrument.
After completing connections or when you want to erase all memorized settings or return the unit to its initial (factory) settings, switch your engine ON or set the ignition switch to ACC ON before pressing the RESET button.
Discs Compatible with this Product Features of This Player
Compatible with DVD, Video CD and CD Formats
DVD, Video CD and CD discs that display the logos shown below can be played back on this player. For more information on discs compatible with this player, refer to the table below. Disc types and logos Diameter/Playable sides

Disc (DVD/Video CD/CD) Playback

Basic Operations 19

Press the PLAY/PAUSE (6) button.
The playback mark ( disc starts playing. ) is displayed for 4 seconds and the
Pressing the PLAY/PAUSE (6) button when a disc is playing, pauses playback. If the last disc played was a DVD, playback starts from the point on that disc where you stopped play previously. With some discs, a menu may be displayed and playback may not be possible from where you left off previously.
Working with the Menu Screen
When DVDs offering menu or Video CDs featuring the PBC (Playback Control) function start playing, a menu is displayed.

With DVDs

Use the joystick to select the desired MENU option.

DISP BAND

Click the joystick.
Playback starts from the selected menu option.

7 To Display the Menu

You can display the menu by pressing the MENU button or TOP MENU button while a disc is playing. Pressing either of these buttons again lets you start playback from the location selected from the menu. For details, refer to the instructions provided with the disc. Note:
The way to display the menu differs depending on the disc.

With Video CDs

Press the number buttons to select a desired menu option.
Playback starts from the selected menu option. Operation with the joystick is not possible.
You can display the menu by pressing the RETURN button while PBC playback. For details, refer to the instructions provided with the disc. Note:
When menu are two or more pages long, press the PREVIOUS (4)/NEXT () button to switch between displays. To play a disc without using a menu (without PBC playback), when the disc is stopped press the appropriate number button to select the desired track. To return to PBC playback, stop playback and press the PLAY/PAUSE (6) button.
Chapter and Track Advance/Return Skipping to the Next Chapter/Track
During play, press the NEXT () button.
Chapter/track numbers are displayed for 8 seconds and you advance to the next chapter/track.
Returning to the Previous Chapter/Track

S.TITLE DISP

During play, press the PREVIOUS (4) button.
Chapter/track numbers are displayed for 8 seconds and you return to the beginning of the current chapter/track. Press the PREVIOUS (4) button twice in succession takes you to the beginning of the chapter/track before the current chapter/track.
Specifying Title/Chapter/Track (Direct Search) Specifying Title

Basic Operations 21

Press the number button corresponding to a desired title number when the disc is stopped.
Title number is displayed for 8 seconds and playback starts from the selected title. To select 3, press button 3. To select 10, press buttons 10 and 0 in order. To select 23, press buttons 10, 10 and 3 in order.

Specifying Chapter

Press the number button corresponding to a desired chapter number during playback.
Chapter number is displayed for 8 seconds and playback starts from the selected chapter. To select 3, press button 3. To select 10, press buttons 10 and 0 in order. To select 23, press buttons 10, 10 and 3 in order.

Specifying Track

Press the number button corresponding to a desired track number.
Track number is displayed for 8 seconds and playback starts from the selected track. To select 3, press button 3. To select 10, press buttons 10 and 0 in order. To select 23, press buttons 10, 10 and 3 in order.
With some discs, the prohibited mark may be displayed and operation may not be possible. With Video CD, Direct Search is not possible during PBC playback.
Disc Fast Forward/Reverse Fast Forward
During play, continue pressing the FORWARD () button.
The fast forward mark ( ) is displayed while pressing the button and disc fast forward is performed.
Release the FORWARD () button at the point you want to watch/listen.
Playback resumes from that point. Note:
If you continue pressing the FORWARD () button for 5 seconds, the color of the fast forward mark ( ) changes from white to blue. When this happens, fast forward continues even if you release the FORWARD () button. To resume playback at a desired point, press the PLAY/PAUSE (6) button. If you fast forward to the end of a CD, fast forward continues from the beginning of the disc. Fast forward may not be possible at certain locations on some discs. If this happens, normal playback automatically resumes.

Fast Reverse

During play, continue pressing the REVERSE (1) button.

Changing Audio Language during Playback (Multi-Audio)
DVDs can provide audio playback with different languages and different systems (Dolby Digital, DTS etc.). With DVDs featuring multi-audio recordings, you can switch between languages/audio systems during playback.
Press the AUDIO button during playback.
The audio selection mark ( ) is displayed for 8 seconds.
Press the AUDIO button while the audio selection mark is displayed.
The audio changes each time you press the AUDIO button. Note:
This function only operates with DVDs featuring multi-audio recordings. The number in the 2 mark on a DVDs package indicates the number of recorded languages/audio systems. With some DVDs, switching between languages/audio systems may only be possible using a menu display. You can also switch between languages/audio systems using the SET UP MENU. For details, refer to Setting the Audio Language on page 42. Only digital output of DTS audio is possible. If this products optical digital outputs are not connected, DTS audio will not be output, so select an audio setting other than DTS. While the audio selection mark is displayed, you can also switch to a desired audio language number using the number buttons. Display indications such as Dolby D and 5.1ch indicate the audio system recorded on the DVD. Depending on the setting, playback may not be with the same audio system as that indicated.
Changing the Subtitle Language during Playback (Multi-Subtitle)
With DVDs featuring multi-subtitle recordings, you can switch between subtitle languages during playback.

Playback Variations 27

Press the SUBTITLE button during playback.
The subtitle selection mark ( onds.
) is displayed for 8 sec-
Press the SUBTITLE button while the subtitle selection mark is displayed.
The subtitle language changes each time you press the SUBTITLE button. Note:
This function only operates with DVDs featuring multi-subtitle recordings. The number in the 2 mark on a DVDs package indicates the number of recorded subtitle languages. With some DVDs, switching between subtitle languages may only be possible using a menu display. You can also switch between subtitle languages using the SET UP MENU. For details, refer to Setting the Subtitle on page 39. While the subtitle selection mark is displayed, you can also switch to a desired subtitle language number using the number buttons. At this time, you can also switch subtitle display OFF by pressing the CLEAR button.

Operating with the Information Display 2 of a DVD
In addition to the Search and Time Search functions of the information display 1, this display lets you select the range for Repeat play, and switch audio output.

Selecting Repeat Range

You can choose between Repeat play of a disc, title or chapter.
Move the joystick left/right to select the Repeat range option.
The Repeat range option is indicated in blue.
This switches you to the selected setting. Disc Title Chapter Disc

Repeat range

When you select Disc, playback of the entire disc is repeated. When you select Title or Chapter, playback of that title or chapter only is repeated.
When the Repeat play of a DVD disc is selected, play stops and depending on the disc a menu is displayed upon completion of play of an entire disc once through.

Selecting Audio Output

You can select between stereo and monaural audio output.
Move the joystick left/right to select the Audio option.
The Audio option is indicated in blue.
This switches you to the selected setting. L+R (Stereo) L (Left) R (Right) L+R (Stereo)
When you select Stereo, audio is output through both left and right channels. When you select Left or Right, audio is output from that channel only.
Operating with the Information Display of a Video CD
This display lets you use the Search function to specify a track to search for desired scenes, use the Time Search function to specify a time to search for a desired scene, switch audio output, and select the range for Repeat play. During playback of Video CDs featuring PBC (Playback Control), PLAYBACK CONTROL ON is displayed. During such playback, Search and Time Search functions cannot be used nor can you select the range for Repeat play. (See page 20.)
Operating with Information Displays 33
You can use the Search function to search for a desired scene by specifying a track, and the Time Search function to specify the time on a disc at which play starts.

Track Time

For Tracks
To jump 10 tracks ahead of the selected one, press the 10 button.
Pressing the CLEAR button cancels the input number. You can also select tracks by moving the joystick up/down.
Time Search is not possible while the disc is stopped.
Even without using an information display you can start playback of a desired track. For details, see page 21.

ideo VCD

You can choose between Repeat play of a disc or a track.
This switches you to the selected setting. Disc Track
When you select Disc, playback of the entire disc is repeated. When you select Track, playback of that track only is repeated.
When the Repeat play of a Video CD disc is selected, play stops and depending on the disc a menu is displayed upon completion of play of an entire disc once through.
Operating with the Information Display of a CD
This display lets you use the Search function to specify a track to search for desired track, select the range for Repeat play, and switch Random play and Scan play ON/OFF.
Operating with Information Displays 35
Searching for a Desired Track
You can use the Search function to specify a track to search for a desired track.
Move the joystick left/right to select the Track option.
The Track option is indicated in blue.
Press the number buttons to input the desired track number.
Play of the selected track starts.

Setting Random Play

Tracks of the CD you are currently listening to are played in a random order.
Move the joystick left/right to select the Random option.
The Random option is indicated in blue.
This switches you to the selected setting. ON OFF

Random play

Setting Scan Play
The beginning of each track on the CD you are currently listening to is played for about 10 seconds.
Move the joystick left/right to select the Scan option.
The Scan option is indicated in blue.

Scan play

Move the joystick up/down to switch the Scan play ON.
When you find the desired track, move the joystick up/down to cancel the Scan play.
Scan play is canceled automatically after all tracks have been scanned.
Changing Initial Settings
Calling up the SET UP MENU
You can use this menu to change Audio, Subtitle, Parental Lock and other DVD settings.
Changing Initial Settings 37
Press the STOP (7) button. Press the MENU button when the disc is stopped.
The SET UP MENU is displayed.
Press the NEXT () button.
The second SET UP MENU is displayed.
To switch to the first SET UP MENU, press the PREVIOUS (w2) button.
The third SET UP MENU is displayed. Note:
To switch to the second SET UP MENU, press the PREVIOUS (w2) button.
If you press the MENU button during display of a SET UP MENU, the SET UP MENU is canceled and the unit returns to the previous display.
7 Returning to the previous display
The SET UP MENU lets you switch between displays of different setting options. To continue performing different settings, or if you make a mistake during setting, pressing the RETURN button takes you back to the previous display each time you press it.

Setting the Subtitle (SUBTITLE LANG.)
You can set a desired subtitle language. If the selected subtitle language is recorded on the DVD, subtitles are displayed in that language. You can also switch subtitle and assist subtitle display ON/OFF.
Changing Initial Settings 39
Setting Subtitles and Assist Subtitles ON/OFF
You can switch Subtitle and Assist Subtitle ON/OFF as desired.
Move the joystick up/down to select the SUBTITLE LANG.
SUBTITLE LANG. is indicated in blue.
A subtitle language menu is displayed.
Move the joystick to select Subtitle ON/OFF (LANGUAGE) or Assist Subtitle ON/OFF (ASSIST). Click the joystick.
Each time you click the joystick the selected setting switches ON/OFF.

7 Assist Subtitles

Assist subtitles offer explanations for the aurally impaired. However, they are only displayed if they are recorded on the DVD.
Setting the Subtitle Language
You can set the preferred subtitle language.
Move the joystick up/down to select the LANGUAGE SELECT.
LANGUAGE SELECT is indicated in blue.
A language select menu is displayed.
Move the joystick up/down to select the desired language.
The currently set language is indicated the mark . The language selected with the joystick is indicated in blue. Note:
To switch to the second language select menu, press the NEXT () button. To return to the first language select menu, press the PREVIOUS (4) button.
A subtitle language is set. Note:
If the selected language is not recorded on the disc, languages specified on the disc are displayed. You can also switch the subtitle language during playback with the SUBTITLE button. (See page 27.) Even if you use the SUBTITLE button to switch the subtitle language, this does not affect the settings here. Pressing the RETURN button takes you back to the previous display.
Changing Initial Settings 41

7 When You Select OTHERS

When you select OTHERS, a language code input display is shown. Refer to Language Code Chart (see page 58), using the number buttons to input the four digit code of the desired language, then click the joystick. Note:
Pressing the CLEAR button cancels the input numbers.
Setting the Audio Language (AUDIO LANG.)
You can set the preferred audio language.
Move the joystick up/down to select the AUDIO LANG.
AUDIO LANG. is indicated in blue.
An audio language menu is displayed.
Move the joystick up/down to select the desired audio language.
To switch to the second audio language menu, press the NEXT () button. To return to the first audio language menu, press the PREVIOUS (4) button.
The audio language is set. Note:
If the selected language is not recorded on the disc, the language specified on the disc is output. You can also switch the audio language during playback with the AUDIO button. (See page 26.) Even if you use the AUDIO button to switch the audio language, this does not affect the settings here. Pressing the RETURN button takes you back to the previous display. If you have selected OTHERS, refer to When You Select OTHERS on page 41.

Setting the Menu Language (MENU LANG.)
You can set the preferred language for displays of menus recorded on a disc.
Changing Initial Settings 43
Move the joystick up/down to select the MENU LANG.
MENU LANG. is indicated in blue.
A menu language menu is displayed.
Move the joystick up/down to select the desired menu language.
To switch to the second menu language menu, press the NEXT () button. To return to the first menu language menu, press the PREVIOUS (4) button.
The menu language is set. Note:
If the selected language is not recorded on the disc, the language specified on the disc is displayed. Pressing the RETURN button takes you back to the previous display. If you have selected OTHERS, refer to When You Select OTHERS on page 41.
Setting the Parental Lock (PARENTAL)
Some DVDs let you use Parental Lock to restrict the viewing of violent and adult oriented scenes by children. You can set the Parental Lock level in steps as desired.
Setting the Code Number and Level
When you first use this function, register your code number. If you do not register a code number, Parental Lock will not operate.
Move the joystick up/down to select the PARENTAL.
PARENTAL is indicated in blue.
Parental Lock setting menu is displayed.
Press the number buttons to input a four digit code number. Click the joystick.
The code number is set, and you can now set the level.
Move the joystick left/right to select the desired level.

LEVEL 8 LEVEL 7 LEVEL 2

Parental Lock details
Playback of the entire disc is possible. (Initial setting) This prevents playback of discs featuring adult oriented material. (Playback of discs for children and non-adult oriented discs is possible.) Playback of discs for children only is possible.

LEVEL 1

The parental lock level is set. Note:
We recommend to keep a record of your code number in case you forget it. The Parental Lock level is recorded on the disc. You can confirm it by looking at the disc package, included literature or on the disc itself. With discs that do not feature a recorded Parental Lock level, you cannot use Parental Lock. With some discs, Parental Lock operates to skip certain scenes only, after which normal playback resumes. For details, refer to the discs instructions. Pressing the RETURN button takes you back to the previous display.

Changing the Level

You can change the set Parental Lock level.

Changing Initial Settings 45
Press the number buttons to input the registered code number. Click the joystick.
This enters the code number, and you can now change the level. Note:
If you input an incorrect code number, the prohibited mark is displayed. Press the CLEAR button and input the correct code number. If you forget your code number, refer to If You Forget Your Code Number on page 57.
Move the joystick left/right to select the desired level. Click the joystick.
The new Parental Lock level is set.
Pressing the RETURN button takes you back to the previous display.
7 When Playing DVDs Enabling Parental Lock
When you play a disc featuring Parental Lock, code number input indications may be displayed. If this happens and you do not input the correct code number, playback will not begin.
Setting Aspect Ratio (TV ASPECT)
There are two kinds of display. A wide screen display has a width-to-height ratio (TV aspect) of 16:9, while a regular display has a TV aspect of 4:3. Be sure to select the correct TV aspect for the display you use.
Move the joystick up/down to select the TV ASPECT in the second SET UP MENU.
TV ASPECT is indicated in blue. (For details, see page 37.)
TV aspect menu is displayed.
Move the joystick up/down to select the desired TV aspect.
The currently set TV aspect is indicated the mark . The TV aspect selected with the joystick is indicated in blue.

TV aspect

16:9 LETTER BOX

Setting detail

Select when using a wide screen display. (Initial setting) Select when using a regular display. When playing discs featuring images recorded with a 16:9 TV aspect, the picture is the shape of a letter box with black bands at the top and bottom of the screen. Select when using a regular display. When playing discs featuring images recorded with a 16:9 TV aspect, the picture is cut short at the right and left of the screen.

PANSCAN

The selected TV aspect is set. Precaution:
When using a regular display, select either LETTER BOX or PANSCAN. Selecting 16:9 may result in an unnatural picture. When playing discs that do not specify PANSCAN, playback is with LETTER BOX even if you select the PANSCAN setting. Confirm whether the disc package bears the 16 : 9 LB mark. (See page 8.) Some discs do not enable changing of the TV aspect. For details, refer to the discs instructions. Pressing the RETURN button takes you back to the previous display.

After pressing the STOP (7) button once, start playback once more. Raise the volume level on the head unit or connected component. Switch the attenuator on the head unit OFF. Secure this unit firmly. Select the appropriate setting for your display. (See page 46.)
The source disc being listened to Before ejecting the disc, switch the source. This problem may with the head unit has been occur when certain connection ejected. methods are used. This product confirms whether a disc is loaded or not. This is a normal operation.
When the ignition switch is turned ON (or turned to ACC), the motor sounds.
7 Problems during DVD playback
Playback is not possible.

Others 55

The loaded disc has a different region number from this unit. Parental Lock is ON.
Replace the disc with one featuring the same region number as this unit. (See page 8.) Switch Parental Lock OFF or change the level. (See page 43.) Input the correct code number. (See page 45.) Press the CLEAR button 10 times to cancel the code number. (See page 57.) You cannot switch among multiple languages if they arent recorded on the disc. Switch using the disc menu.
A Parental Lock message is displayed and playback is not possible. Parental Lock cannot be canceled.
The code number is incorrect. You have forgotten your code number.
Dialog language (and subtitle language) cannot be switched.
The DVD playing does not feature multiple language recordings. You can only switch between options indicated in the disc menu.
No subtitles are displayed.
The DVD playing does not feature subtitles. You can only switch between options indicated in the disc menu.
Subtitles are not displayed if they are not recorded on the disc. Switch using the disc menu.
Playback is not with the audio language and subtitle language settings selected in the SET UP MENU.
The DVD playing does not feature dialog or subtitles in the language selected in the SET UP MENU.
Switching to a selected language is not possible if the language selected in the SET UP MENU is not recorded on the disc. You cannot switch between multiple angles if the DVD does not feature scenes recorded from multiple angles. Switch between multiple angles when watching scenes recorded from multiple angles.
Switching the viewing angle The DVD playing does not feature scenes shot from multiple is not possible. angles. You are trying to switch to multiple angle viewing of a scene that is not recorded from multiple angles. The picture is extremely unclear/distorted and dark during playback.
The disc features a signal to pro- Since this product is compatible hibit copying. (Some discs may with the copy guard analog copy have this.) protect system, when playing a disc that has a signal prohibiting copying, the picture may suffer from horizontal stripes or other imperfections when viewed on some displays. This does not mean this product is malfunctioning.

7 Problems during Video CD playback

Symptom Cause Remedy

This operation is not possible with Video CDs not featuring PBC. Switch PBC ON. (See page 20.) Switch PBC OFF. (See page 20.)
The PBC (Playback Control) The Video CD playing does not feature PBC. menu display cannot be called up. PBC is switched OFF. Repeat play and Track/Time Search are not possible. PBC is switched ON.
7 Problems during Multi-Channel AV Master Unit connection

Theres no sound.

Optical digital cables are not correctly connected. The Multi-Channel AV Master Unit is not compatible with a 96 kHz signal.
Connect optical digital cables correctly. Switch the output setting to 48 kHz. (See page 49.)
Information display operation is not possible.
Operate using this units inforIndications are not the MultiChannel AV Master Units infor- mation display. (See page 29.) mation display.
If You Forget Your Code Number
Refer to Changing the Level, step 3 on page 45, and press the CLEAR button 10 times. The registered code number is canceled, letting you register a new one.

Others 57

Error Message
When problems occur with disc playback, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, contact your dealer or your nearest PIONEER Service Center. Message (error number)

ERROR-02

When this message is displayed
The disc is dirty. The disc is scratched.
Wipe the disc clean. (See page 11.) If the disc is scratched, replace it with another. (See page 11.) Wait until the units temperature returns to within normal operating limits. Replace the DVD with one bearing the correct region number.
THERMAL PROTECTION IN MOTION
The temperature of this unit is outside of the normal operating range.
DIFFERENT REGION DISC The disc does not have the same region number as this unit. NON-PLAYABLE DISC
This type of disc (CD-ROM etc.) Replace the disc with one this cannot be played by this unit. unit can play. (See page 7.) The disc is loaded upside down. Check that the disc is loaded correctly.

Parental Lock

Some DVDs with violent or adult-oriented scenes feature parental lock which prevents children from viewing such scenes. With this kind of disc, if you set this units parental lock level, playback of scenes inappropriate for children will not be possible, or these scenes will be skipped.

Playback Control (PBC)

This is a playback control signal recorded on Video CDs (Version 2.0). Using menu displays provided by Video CDs with PBC lets you enjoy playback of simple interactive software and software with search functions. You can also enjoy viewing high- and standard-resolution still images.

Region Number

DVD players and DVD discs feature region numbers indicating the area in which they were purchased. Playback of a DVD is not possible unless it features the same region number as the DVD player. This units region number is displayed on the rear of the unit.
DVDs have a high data capacity, enabling recording of multiple movies on a single disc. If, for example, one disc contains three separate movies, they are divided into Title 1, Title 2 and Title 3. This lets you enjoy the convenience of Title Search and other functions.

Appendix

Angle Angle mark Aspect ratio Assist subtitle Audio language 28, 31 28, 47 46, 26, 42

Appendix 61

Panscan Parental lock PBC (Playback control) Prohibited mark 46 43, 60 9, 20, 60 8, 54
Random play Region number Repeat range Reset 36 8, 60 32, 34, 35 6
Chapter Code number Condition memory 9, 6
Digital output Direct search DOLBY DIGITAL DTS 10, 48, 59 10, 48, 59
Scan play Set-up menu Slow motion playback Still picture Subtitle language 27, 40
Fast forward Fast reverse Frame-by-frame 24
Theft protection Title Track TV aspect 12 9, 46

Information display 29

Video CD 7
Language code chart Letter box Linear PCM (LPCM) 48, 49, 59
Menu language MPEG Multi-angle Multi-audio Multi-subtitle 43 7, 59 28, 59 26, 60 27, 60
Optical digital output 60

Specifications

General
Power source. 14.4 V DC (10.8 15.1 V allowable) Grounding system.. Negative type Max. current consumption.. 4 A Dimensions (DIN) (chassis). 180 (W) 50 (H) 150 (D) mm [7-1/8 (W) 2 (H) 5-7/8 (D) in] (nose). 188 (W) 58 (H) 19 (D) mm [7-3/8 (W) 2-1/4 (H) 3/4 (D) in] (D) (chassis). 178 (W) 50 (H) 155 (D) mm [7 (W) 2 (H) 6-1/8 (D) in] (nose). 170 (W) 46 (H) 14 (D) mm [6-3/4 (W) 1-3/4 (H) 1/2 (D) in] Weight.. 1.3 kg (2.9 lbs)

Player

System. DVD-Video, Video CD, Compact disc audio system Usable discs. DVD-Video, Video CD, Compact disc Signal format. Sampling frequency: 44.1/48/96 kHz Number of quantization bits: 16/20/24; linear Region Number. For U.S. and Canadian models: 1 For European models: 2 For Southeast Asian models: 3 For South American and Oceanian models: 4
Output level.. 1.0 Vp-p/75 (0.2 V)
(with DVD, at Sampling frequency 96 kHz) Frequency response.. 5 44,000 Hz Signal-to-noise ratio [For U.S. and Canadian models].. 97 dB (1 kHz) (IHF-A network) (CD: 96 dB (1 kHz) (IHF-A network)) Signal-to-noise ratio [Other area models].. 97 dB (1 kHz) (IEC-A network) (CD: 96 dB (1 kHz) (IEC-A network)) Dynamic range.. 96 dB (1 kHz) (CD: 95 dB (1 kHz)) Distortion.. 0.008 % (1 kHz) Output Level.. 1.0 V (1 kHz, 0 dB) Number of channels.. 2 (stereo)
Specifications and the design are subject to possible modification without notice due to improvements.

PIONEER CORPORATION

4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, California 90801, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.05.11 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia TEL: (03) 9586-6300 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411 PIONEER ELECTRONICS DE MEXICO, S.A. de C.V. San Lorenzo 1009 3er. Piso Desp. 302 Col. Del Valle Mexico, D.F. C.P. 03100 TEL: 5-688-52-90
Published by Pioneer Corporation. Copyright 2001 by Pioneer Corporation. All rights reserved. Publication de Pioneer Corporation. Copyright 2001 Pioneer Corporation. Tous droits de reproduction et de traduction rservs.

<KNKFF/01D00000>

Printed in Japan Imprim au Japon <CRB1700-B> EW, UC, ES/RC, ES/RD