23ft (7m)

Operating other Pioneer components
By connecting a control cord (optional), you can control other Pioneer equipment using this remote control unit. Point the remote control unit towards the remote sensor of this unit, even when operating other equipment. The remote control signals are received by the remote sensor of this unit, and sent to the other devices via the CONTROL OUT terminal.

CONTROL

IN OUT
VSX-D409/ VSX-D509S Other Pioneer products with mark
You can also control Pioneer components by pointing the receiver's remote control directly at the component. This type of operation does not require control cords.

Remote control unit

Connect to CONTROL IN terminal of other Pioneer products with mark.
Connecting Your Equipment
Connecting Audio Components
To begin set up, connect your audio components to the jacks as shown below. These are all analog connections and your analog audio components (cassette deck) use these jacks. Remember that for components you want to record with you need to hook up four plugs (a set of stereo ins and a set of stereo outs), but for components that only play you only need to hook up one set of stereo plugs (two plugs). To use Digital source features you must hook up your digital components to the digital inputs but it is also a good idea to hook up your digital components to analog audio jacks. If you want to record to/from digital components (like an MD) to/from analog components, you must hook up your digital equipment with these analog connections. See p.11-12 for more on digital connections. When connecting your equipment, always make sure the power is turned off and the power cord is disconnected from the wall outlet.
Only the VSX-D509S has S-video jacks and optical digital out jack. The arrows indicate the direction of the audio signal.

AM LOOP ANTENNA

AUX CD

CONTROL OUT

O U T IN
PCM / 2 / DTS DIGITAL IN TO MONTOR TV

DIGITAL OUT

VCR / DVR IN OUT

FRONT SPEAKERS

CENTER SPEAKERS

CENTER PREOUT

TV / SAT IN
TO MONTOR TV SUB WOOFER PREOUT

OUT VCR / DVR

SURROUND SPEAKERS

AC OUTLET

DVD / LD IN

FM UNBAL 75 FM ANTENNA

R E C P L A Y
OUT CD - R / TAPE / MD IN

SURROUND

TV / SAT
CENTER IN SUB WOOFER DVD 5.1 CH INPUT

DVD / LD

OUTPUT

REC PLAY

CD player
CD recorder or Cassette deck

7 Audio cords

Use audio cords (not supplied) to connect the audio components.
Connect red plugs to R (right) and white plugs to L (left). Be sure to insert completely.

Cassette deck placement

Depending on where the cassette deck is placed, noise may occur during playback of your cassette deck which is caused by leakage flux from the transformer in the receiver. If you experience noise, move the cassette deck farther away from the receiver.
Connecting DVD 5.1 Channel Components
DVD and LD discs are compatible with both 2 channel and 5.1 channel audio output formats. Connections can be made from a DVD player, multi-channel decoder equipped with 5.1 analog outputs to the 5.1 analog inputs on this unit. Always make sure that the receiver is switched off and unplugged from the wall outlet before making or changing any connections.

FRONT OUT PUT

SURROUND OUT PUT

SUB WOOFER

CENTER

VIDEO OUT

Components equipped with 5.1 channel analog output jacks
The 5.1 channel input can only be used when DVD 5.1 CH is selected.
AC outlet [switched 100 W (0.8 A) max]
Power supplied through this outlet is turned on and off by the receiver's POWER switch. Total electrical power consumption of connected equipment should not exceed 100 W (0.8 A). Do not connect a heater, TV, etc. memo This unit should be disconnnected by removing the power plug from the wall socket when not in regular use, e.g., on vacation. Do not connect appliances with high power consumption such as heaters, irons, or television sets to this AC OUTLET in order to avoid overheating and fire risk. This can also cause the receiver to malfunction.
CAUTION: DO NOT CONNECT A MONITOR OR TV SET TO THIS UNIT'S AC OUTLET.
Connecting Video Components
Connect your video components to the jacks as shown below. Regarding digital video components (like a DVD player), you must use the analog connections pictured on this page for the video signal but in order to use Digital source you should hook up their audio to a digital input (see the next page). It is also a good idea to hook up your digital components with analog audio connections as well (see the previous page). To cover all possible laser discs a DVD/LD player or LD player requires an analog connection (as shown here) and two digital connections (see the next page). When connecting your equipment always make sure the power is turned off and the power cord is disconnected from the wall outlet. TV tuner (or Satellite tuner) Video deck

VIDEO L R

7 Front

OUTPUT INPUT

S-VIDEO VIDEO INPUT VIDEO L AUDIO R

Video camera (etc.)

VIDEO INPUT
DVD player (or LD player)

TV (monitor)

VSX-D509S only Front video connections are accessed via the front panel input selector as VIDEO. memo VSX-D509S only

7 Audio/Video cords

Use audio/video cords (not supplied) to connect the video components and a video cord to connect the monitor TV. Connect red R plugs to R (right), L white plugs to L VID EO (left), and the yellow plugs to VIDEO. Be sure to insert completely.
If your video components have S-video jacks, you could use S-video cords (not supplied) to connect them on the back of the receiver. However, if you use S-video cords for your video hook ups you must also hook up your TV with Svideo connections. Conversely, if you use regular composite video cords for video hook ups, you should use them for your TV as well.
Connecting Digital Components
In order to use PCM/2 Digital/DTS soundtracks, you need to make digital audio connections. You can do this by either coaxial or optical connections (you do not need to do both). The quality of these two types of connections is the same but since some digital components only have one type of digital terminal, it is a matter of matching like with like (for example, the coaxial out from the component to coaxial in on the receiver). The VSX-D409/D509S has coaxial and two optical inputs for a total of three digital inputs. Connect your digital components as shown below. There is one digital out jack which is marked PCM/2/DTS (VSX-D509S only) OUT. If you connect this to the optical input on a digital recorder (currently these include MD, DAT and CD-R) you can make direct digital recordings with this unit. When connecting your equipment, always make sure the power is turned off and the power cord is disconnected from the wall outlet. VSX-D509S

VSX-D509S only

CONTROL OUT COAX OPT1 OPT2 OPT PCM / 2 / DTS DIGITAL IN TO MONTOR TV DIGITAL OUT

DIGITAL OUT COAX

DIGITAL IN

DVD player

CD recorder
7 Digital audio cords/Optical cables

FQ ST ENTER ST

MULTI CONTROL DVD/LD TV/SAT VCR/DVR
CHANNEL TEST SELECT TONE ATT SIGNAL SELECT

SOURCE CLASS

4 Press % or to select the setting you want.
The setting is entered automatically.
5 Repeat steps 3 and 4 to set other surround modes.
Press ENTER to exit the setting mode. The setting mode is automatically exited if no operation is performed for 10 seconds.
SPEAKERS (Front, Center, Surround) setting mode
This setting establishes the size and configuration of the speaker system you have connected. So, for example, here you set whether you have connected surround speakers or not, and how big they are. Selecting Large or Small will determine how much bass is sent by the receiver to the speakers being set. This setup system has certain constraints. For example, all your speakers cannot be set to Large, you need to decide which speakers should receive the most bass and set them to Large. In the display, F, C, and S refer to front, center, and surround speakers respectively. Speaker size is denoted as L for large speakers, S for small speakers, and (asterisk) if no speaker is connected.
If the cone size (diameter) of the speaker is larger than 5 inches, please set to Large.
Switch the speaker setting mode according to the speakers you hooked up. Use the % or buttons.
The configurations shown on the right will appear in the display on the front of the receiver. One of them should match your speaker set up. Cycle through the different possibilities until you find the one that matches your set up.
* Press # to advance to the next receiver setting, and press @ to return to a previous receiver setting.
SUB WOOFER ON/PLUS/OFF setting mode
Sets whether the SUB WOOFER is used or not. Also, when used you have the option to use the PLUS setting.
Initial setting is ON. Setting the front speaker size to Small in the SPEAKERS setting mode automatically locks the sub woofer in the ON position. Use the PLUS for extra bass. When you use PLUS you will get the bass sounds from the sub woofer even if the front speakers are set to Large.
Press % or to select sub woofer ON, PLUS or OFF.
Crossover frequency setting mode
Crossover frequency is the point where the receiver divides the high and low sounds (the frequencies) between the speakers. Since most smaller speakers cant handle deep bass tones, this setting allows you to send those sounds to the sub woofer (or speakers set to Large if you dont have a sub woofer) instead of the speakers set to Small in your system. Choose the point at which you want the frequency routed to the sub woofer (or Large speakers). We recommend setting this to 200 Hz if smaller bookshelf-type speakers are used for your Small speakers.

Dynamic range control setting mode
Dynamic range is the difference between the loudest and softest sounds in any given signal. The dynamic range control helps you play back sounds so the quieter sounds are audible yet the louder sounds dont get distorted. It does this by compressing the dynamic range. When watching a movie at low volume, setting this function enables low level sounds to be heard more easily but you wont be jolted by lounder sounds.
Initial setting is OFF. When the volume level is increased, set to OFF. For listening enjoyment at low volumes, set to MAX for maximum dynamic range compression. Dynamic range control is effective only when a Dolby Digital signal is being played back.
Press % or to set the dynamic range control (OFF, MAX, or MID).

Dual mono setting

The dual mono setting can only be used when listening to Dolby Digital discs that have dual mono software encoded in them. With this setting you can choose which channel in the dual mono setting you want to listen to. Thus, it is useful for soundtracks that have one language on one channel and a different language on the other. Remember you can only use this setting if you have Dolbly Digital software with this feature and want to isolate one of the channels therein. Otherwise, just ignore this function. There are two different ways to route the sound in the dual mono setting, one is with Dolby Digital mode on, the other with Dolby Digital mode off. If Dolby Digital mode is switched on, the ch1 setting will play channel 1 through your center speaker. The ch2 setting will play channel 2 though your center speaker and the MIX setting will play both channels through the center speaker. With Dolby Digital mode off, the dual mono sound routing is as follows: In the ch1 setting your will hear channel 1 out of both front speakers. In the ch2 setting you will hear channel 2 out of both speakers. In the L. c1 R. c2 setting the speakers will play the soundtrack independently of each other. The left front speker will play channel 1 and the right front speaker will play channel 2. The last setting, MIX, mixes both channels and plays them out of both speakers.
The default setting of this feature is L C 1 R C 2.
L. c 1 R. c 2 MIX ch2 ch1
Press % or to cycle through the possible DUAL MONO settings.
Coaxial digital input setting
Sets the input component to be assigned to the coaxial digital input jack.

Initial setting is DVD.

Press % or to select the coaxial digital input (DVD, TV, CD, CD-R, VCR, DV-R or OFF).
After you assign the component to a digital jack, like coaxial one, whenever you select that component, for example CD, the receiver will automatically change to the digital input setting. You can see this in the DIGITAL/ANALOG indicator on the front of the receiver.

4 Point the remote toward the component to be controlled, enter the 3 digit setup code.
When you enter the setup code, the remote emits a power ON/ OFF signal. If the component turns ON or OFF, you have entered the proper code. If the component does not turn ON or OFF and there is more than one setup code, press @ or # to select another code in step 3 or try inputting another code (starting again from step 2). Some manufacturers use several sets of remote control signals and the first code may not correspond to your component.
Repeat steps 2 through 4 to assign preset codes for as many components as necessary.
5 Press REMOTE SET UP to exit the preset mode.
The remote control returns to the previous operation mode. When operating a PIONEER DVD/LD player, set the manufacturer code to 111 in the preset mode. All codes enrolled in the manufacturer code list can be set even if a code is not displayed. TUNER cannot be preset. If no commands are entered the receiver automatically exits the preset code mode after 20 seconds.
Learning mode: Programming signals from other remote controls (VSX-D509S only)
If preset codes are not available for your component(s), or the available preset codes do not operate correctly, you can use this function to program in signals from the remote control(s) of your other component(s). This operation can also be used after recalling a preset code to program additional operations not covered in the preset codes.
SOURCE RECEIVER DVD TV VCR CD-R MULTI CONTROL RCV CD TUN TVC
1 Press SETUP and hold for 3 seconds.
The visible LED will blink twice.
2 Press the MULTI CONTROL button for the component you want to control and then press 9, 7, then 5 to select the LEARNING setup mode. The remote is ready to learn new commands from other remote controls.
The LED flashes rapidly. To cancel LEARNING setup mode Press SETUP button. After ten seconds if no commands are entered the remote will revert to its previous mode.
3 Press the button to be programmed (for example the 3 [play] button). 4 Point the remote controls at each other, about 1-2 inches apart, and press the button on the remote control 1,5 other to program. for the operation you want
1 Point the remote controls toward each other. 2 Press the button on the other remote control corresponding to the operation you wish to program. The LED on this receivers remote will go out and then blink twice when the operation is learned. Press the teaching key repeatedly, varying the distances between the remotes, until you see this receivers remote blink twice, indicating the operation has been learned.
MASTER VOLUME FL DIMMER LOUDNESS FUNCTION MUTING AV PRE-PROGRAMMED AND LEARNING REMOTE CONTROL UNIT EFFECT RECEIVER TEST TONE

PHONES

TREBLE MIDNIGHT

This illustration shows the VSX-D509S model.

1 STANDBY indicator

Lights when the receiver is in standby mode (note that the receiver consumes a small amount of power (1W) in standby mode).
/DTS button (see pages 38, 41)
Use to switch between the various Dolby/DTS surround modes.

STANDBY/ON button

Switches the receiver between on and standby.(note that the receiver consumes a small amount of power (1W) in standby mode).
- SIGNAL SELECT button (see page 37)
Use to select between an analog or digital signal.

= MASTER VOLUME

Use to set the overall listening volume.
3 STATION (+/), FREQUENCY (+/), TUNING SELECT buttons (see pages 42-44)
STATION (+/) Selects station memories when using the tuner. FREQUENCY (+/) Selects the frequency when using the tuner. TUNING SELECT Switches between station memory and frequency select modes.

~ PHONES jack

Use to connect headphones but this does not switch the speakers off.

! SPEAKER button

Use to switch the speaker system A = B = A+B = off.

@ DIRECT button

Use to switch DIRECT playback on or off. This mode bypasses the tone controls and channel levels for the most accurate reproduction of a program source.
4 CLASS button (see pages 43-44)
Switches between the three banks (classes) of station memories.
5 MEMORY button (see page 43)
Press to memorize a station for recall using the STATION (+/) buttons.

# BASS (+/) buttons

Use to increase/decrease bass (within a range of -6dB to 6dB in 2dB steps).
6 MPX button (see page 42)
lf the TUNED or STEREO indicators don't light when tuning to an FM station because the signal is weak, press the MPX button to switch the receiver into mono reception mode. This should improve the sound quality and allow you to enjoy the broadcast.

$ TREBLE (+/) buttons

Use to increase/decrease treble (within a range of -6dB to 6dB in 2dB steps).

% Function buttons

Use to select a source for playback or recording.
^ MIDNIGHT button (see page 40)
Use when listening to movie soundtracks at low volume. This feature will enable you to hear quiet sounds and not get jolted by loud or sudden sound effects.
7 Display (see page 31) 8 Remote sensor
Receives the signals from the remote control.
9 DSP MODE button (see page 39)
Use to switch between the various DSP modes available (HALL1, HALL 2, JAZZ, DANCE, THEATER1, THEATER 2) and DSP off. Use to create different surround sound effects from any stereo source.

& MONITOR button

Press to switch tape monitoring on/off.
* VIDEO INPUT jacks (VSX-D509S only)
Connect a video camera, video game system, etc. to the VIDEO INPUT jacks (refer to page 10).

Display

PRO LOGIC DIGITAL SIGNAL SELECT

DSP ATT

MIDNIGHT LOUDNESS

DIRECT S.BASS

MONITOR MONO

TUNED AB STEREO

EON RDS RF ATT
ANALOG DIGITAL DIGITAL DTS

1 DTS indicator

Lights when DTS mode is being used.

PRO LOGIC indicator

When the 2 (DOLBY)/DTS mode of the receiver is on, this lights to indicate playback of a two channel source.
2 DIGITAL : Lights when a DOLBY DIGITAL signal is played. DTS: Lights when a source with DTS audio signals is played.

DIGITAL indicator

When the 2 (DOLBY)/DTS mode of the receiver is on, this lights to indicate playback of a Dolby Digital signal. However, 2 PRO LOGIC lights during 2 channel playback of Dolby Digital.

3 DSP indicator

Lights when any Advanced Theater or DSP mode is selected.

4 MIDNIGHT indicator

Lights when MIDNIGHT listening mode is in use.

0 CHARACTER display

Shows the radio frequency or function (DVD/LD, CD, etc.) receiver is using.

5 DIRECT indicator

Lights when source DIRECT is in use. This function bypasses all tone, balance, DSP and Dolby Surround effects.

- OVERLOAD indicator

This lights when an analog signal is too strong (the SIGNAL SELECT needs to be on ANALOG). It indicates the sound is distorting and the signal should be reduced.

6 MONITOR indicator

Lights when MONITOR is selected to hear a recording as it's being made (see page 45).

= ATT indicator

Lights when ATT is used to attenuate (reduce) the level of the input signal (can only be used in ANALOG mode).

7 TUNER indicators

MONO: Lights when the mono mode is set using the MPX MODE button. TUNED: Lights when a broadcast is being received. STEREO: Lights when a stereo FM broadcast is being received in auto stereo mode.

~ LOUDNESS indicator

Lights when the LOUDNESS, used to boost the bass and treble in quiet listening, is on.

! SPEAKER indicator

Use to skip forward tracks on CD players etc. Also use to access DTV menus.

button (MPX)

Use to stop other components. Also use to switch between auto stereo and mono reception of FM broadcasts. If the signal is weak then switching to MONO will improve the sound quality.

_ 4 button (DTV ON/OFF)

Use to skip reverse tracks on CD players etc. Also use to turn DTV on/off.

+ TEST TONE

Use to sound the TEST TONE when setting up the surround sound of the receiver. To use first press the RECEIVER button then operate this button.

- 2 button

Use to put receiver in DOLBY DIGITAL, DOLBY SURROUND and DTS modes. To use first press the RECEIVER button then operate this button.

FL DIMMER button

Use this button to make the fluorescent display (FL) dimmer or brighter. There are three brightness settings as well as an off setting.

= DSP button

Use to put receiver in one of the DSP modes. To use first press the RECEIVER button then operate this button.

~ CHANNEL SELECT

Use to select a speaker when setting up the surround sound of the receiver. To use first press the RECEIVER button then operate this button.
SETUP button (see p.27, 29)
Use this button when setting up the remote control to control other components.

MUTING button

Use to mute the sound or restore the sound if it has been muted.
Remote Control (VSX-D409)

@ # $ % ^

1 MULTI CONTROL buttons
DSP mode (see pages 39) Use to put receiver in one of the DSP modes. To use first press the RECEIVER button then operate this button. MIDNIGHT (see page 40) Use to put receiver in MIDNIGHT mode. To use first press the RECEIVER button then operate this button. 5.1 CH (see page 40) When the DVD/LD or DVD 5.1 CH function is selected each press switches the DVD/LD input between DVD/LD and DVD 5.1 CH. To use first press the RECEIVER button then operate this button. CHANNEL SELECT (see page 22-note) Use to slect a speaker when setting up the surround sound of the receiver. To use first press the RECEIVER button then operate this button. TEST TONE (see page 22) Use to sound the TEST TONE when setting up the surround sound of the receiver. To use first press the RECEIVER button then operate this button.
2 RECEIVER button (see page 16)
Use this button when setting up the surround sound for the receiver.
Use the number buttons to select the radio frequency in tuner DIRECT ACCESS mode or the tracks in CD, DVD mode etc. Also, buttons marked with the following names have special functions. If you try to use one of these functions but the display flashes it means that function cannot be used in the current mode (for example DSP modes cannot be used when 5.1 CH setting is on). 2 (see pages 38, 41) Use to put receiver in DOLBY DIGITAL, DOLBY SURROUND and DTS modes. To use first press the RECEIVER button then operate this button.

Press MIDNIGHT.

Each press switches MIDNIGHT listening mode on or off.
The effect automatically adjusts according to the volume level.
ADVANCED THEATER mode ( Dolby/DTS mode)
Switch on the Dolby/DTS mode by pressing the 2 surround button. When Dolby/DTS mode is ON, Dolby Pro Logic, Dolby Digital and DTS, and signal processing is performed automatically corresponding to the input signal. Use this button to cycle through the various modes. For all modes other than STANDARD, DSP is switched on and will appears in the diisplay.

DVD/LD TV/SAT VCR/DVR CD

2 Switch the Dolby/DTS mode on and off by pressing 2 on the remote control or 2/ DTS on the front panel.
Each press changes the display as follows.
=STANDARD = MUSICAL = DRAMA (OFF) + EXPANDED + ACTION +
Refer to page 36 for more details about each surround effect.

2 /DTS

memo The effects of Dolby/DTS mode can be adjusted in the range of 10 to 90 by pressing EFFECT +/ (the default setting is 70). Also, the effect level can be set in each Dolby/DTS mode by pressing the EFFECT +/ button. The STANDARD mode cannot be changed.
Playing a Source Operation

ENTER

4 If necessary, press SIGNAL SELECT to select the input signal corresponding to the source component (as above). 5 Start playback of the component you selected in step 1.

Using the Tuner

Finding a Station
The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. If you already know the exact frequency of the station you want to listen to, see Tuning Directly to a Station on the following page. Once you are tuned to a station you can memorize the frequency for recall latersee Memorizing Stations on page 43 for more on how to do this.
1 Press the MULTI CONTROL TUN button
On the receiver, press the FM/AM button to select the tuner mode.
2 Use the BAND button to change the band (FM or AM), if necessary.
Each press switches the band between FM and AM (on the front panel use the FM/AM button).

3 Tune to a station.

FQ ST ENTER
Automatic tuning To search for stations in the currently selected band, press and hold either the FQ. + or FQ. button for about a second. The receiver will start searching for the next station, stopping when it has found one. Repeat this step to search for other stations. Manual tuning To change the frequency one step at a time, press the FQ. (5) buttons.

+ / FQ.

High speed tuning Press and hold the FQ. + or FQ. button for high speed tuning, releasing the button once the desired frequency is reached.

MPX mode

If the TUNED or STEREO indicators don't light when tuning to an FM station because the signal is weak, press the MPX button to switch the receiver into mono reception mode. This should improve the sound quality and allow you to enjoy the broadcast.

4 ENTER (DISC) button

Use to enter a channel.

5 523ENTER

Press to select or adjust and navigate items on the menu screen.
: Use to bring up the DTV menus. (VSX-D509S only)
Use to select the desired closed caption.

(VSX-D409 : 7)

Use to switch DTV audio tracks
Use as the GUIDE button for navigating

(VSX-D409 :

SOURCE)
Press to switch the DTV on or off.

0 (VSX-D509S only)

Use to set the screen mode.

- MENU

Use to select different menus from the DTV functions.
THESE FOUR BUTTONS ARE DEDICATED TV CONTROL BUTTONS FOR ANY TYPE OF TV SETUP.

= TV FUNC. (TV only)

Press to switch the TV input (not possible with some models).

~ 5 & 8 @ % ^

3 = 1 ! 7 # $

~ CHANNEL +/

Use to select channels.

! TV VOL +/

Use to adjust the TV volume.

@ (VSX-D409 : 3)

Use to get INFO on the DTV program.

# 2 (VSX-D409 : 1)

Use to choose the BLUE commands on a DTV menu.

$ DSP (VSX-D409 : )

Use to choose the GREEN commands on a DTV menu.

% BLANK (VSX-D409 : )

Use to choose the YELLOW commands on a DTV menu.
^ TEST TONE (VSX-D409 : 4)
Use to choose the RED commands on a DTV menu.

& TOP MENU

Press to clear the DTV menu.
Cable TV/Satellite TV/TV Controls
Use MULTI CONTROL buttons to put the remote control in the stated mode. 1 TV

2 TV FUNC. (TV only)

Press to switch the TV input. (Not possible with all models. If it doesn't work with the preset code, use the learning feature see page 26.)

3 TV VOL +/

4 CHANNEL +/

6 Number buttons

7 ENTER (DISC) button (VSX-D509S only)

(VSX-D409 only)

Use to move to lower numbered channels

9 (VSX-D409 only)

Use to move to higher numbered channels
0 EFFECT +/ (VSX-D409 only)
For TV and cable TV use tis button toimmediately enter a new channel (CHANNEL ENTER function). For satellite TV use this button to exit the menu screen.

- MENU (VSX-D409 only)

Use to select the menu screen.
= TOP MENU (VSX-D409 only)
Use to bring up the GUIDE on a satellite TV.
The first four buttons for the VSX-D409, and the the first three buttons for the VSX-D509S, are dedicated to control the TV assigned to the TVC button. Thus if you only have one TV to hook up to this system assign it to the TVC MULTI CONTROL button. If you have two TVs, assign the main TV to the TVC button. If you hook up your system this way, the first four TV controls will always be accessible.

Selecting fine audio equipment such as the unit youve just purchased is only the start of your musical enjoyment. Now its time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Associations Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion-and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time your hearing comfort level adapts to higher volumes of sound. So what sounds normal can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level: Start your volume control at a low setting. Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound level: Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime.

LISTENING For A Lifetime

Information courtesy of the Deafness Research Foundation.
Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer Authorized Independent Service Company, or if you wish to purchase replacement parts, operating instructions, service manuals, or accessories, please call the number shown below.

8004211404

Please do not ship your product to Pioneer without first calling the Customer Service Department at the above listed number for assistance. PIONEER ELECTRONICS SERVICE, INC. CUSTOMER SERVICE DEPARTMENT P.O. BOX 1760, LONG BEACH, CA 90801-1760, U.S.A. For warranty information please see the Limited Warranty sheet included with your product. Should this product require service in Canada, please contact a Pioneer Canadian Authorized Dealer to locate the nearest Pioneer Authorized Service Company in Canada. Alternatively, please contact the Customer Service Department at the following address: Pioneer Electronics of Canada, Inc. Customer Service Department 300 Allstate Parkway, Markham, Ontario L3R OP2 (905) 479-4411 1-877-283-5901 For warranty information please see the Limited Warranty sheet included with your product. Si ce produit doit tre rpar au Canada, veuillez vous adresser un distributeur autorise Pioneer au Canada pour obtenir le nom de la Socit de Service Autorise Pioneer le plus prs de chez vous. Ou encore, veuillez communiquer avec le Service de Clientle de Pioneer: Pioneer lectroniques du Canada, Inc. Dpartement de service aux consommateurs 300 Allstate Parkway, Markham, Ontario L3R OP2 (905) 479-4411 1-877-283-5901 Pour obtenir des renseignements sur la garantie, veuillez vous reporter au feuillet sur la Garantie Limite qui accompagne le produit.
Published by Pioneer Corporation. Copyright 1999 Pioneer Corporation. All rights reserved.

Pioneer Electronics of Canada, Inc.
Remote Control Part Number List
Model AVIC-505 AVX-P7000CD A-X1010V A-X1010V(BK) A-X900 A-X909V A-X909V(BK) BSS-C1 C-72 C-90 C-90(BK) C-900/S C-91 CCS-310 CCS-530 CCS-550 CD-FM7 CD-P70FM CD-P75FM CD-R60 CD-R600 CD-R66 CD-SR70 CD-SR77 CDX-FM121 CDX-FM1227S CDX-FM1235S CDX-FM1237S CDX-FM1239S CDX-FM1257 CDX-FM128 CDX-FM38 CDX-FM61 CDX-FM623S CDX-FM627S CDX-FM629S CDX-FM63 CDX-FM65 CDX-FM657 CDX-FM67 CJ-V55 CLD-1010 CLD-1010(BK) CLD-1030 CLD-1070 CLD-1080 CLD-1090 CLD-1091 CLD-1100 CLD-1580K CLD-2070 CLD-2080 CLD-2090 CLD-3030 CLD-3070 CLD-3080 CLD-3090 Part Number CXB2174 CXB2657 AXD1003 AXD1003 ?? AXD1003 AXD1003 MWK1011 AXD1171 AXD1027 AXD1027 AXD1027 AXD1063 AXD1138 AXD1196 ?? CXA5564 CXA6570 CXB2969 CXA9436 PCDR600 CXB1160 CZX3174 CZX3216 CXA5863 CXA7036 CXB2054 CXB2053 CXB2052 CXB3261 CXA7036 CXA4840 CXA5863 CXA7558 CXA7036 CXA9460 CXA7558 CXA7030 CXB3261 CXA7036 DXR1007 VXX1040 VXX1040 VXX1122 VXX1249 VXX1383 VXX1530 VXX1530 VXX-080 VXX1442 VXX1254 VXX1418 VXX1536 VXX1133 VXX1244 VXX1351 VXX1538 Description REMOTE CONTROL UNIT*BATT LID CZN7543 REMOTE CONTROL (COMES WITH AVM-P7000) REMOTE CONTROL UNIT**BATT LID:AZN1051 REMOTE CONTROL UNIT**BATT LID:AZN1051 REMOTE CONSOLE,IS FURNISHED W/F-X700 IF USED REMOTE CONTROL UNIT**BATT LID:AZN1051 REMOTE CONTROL UNIT**BATT LID:AZN1051 REMOTE CONTROL UNIT REMOTE CONSOLE UNIT(CU-C001),BATT LID=AZH1035 REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT**BATT LID:N/A REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT***IN XS-P510M REMOTE CONSOLE UNIT SEE GR-P720 REMOTE CONSOLE UNIT,**BATT LID=CNS2197 REMOTE CONTROL UNIT,BATT LID:CNS2850 REMOTE CONTROL UNIT*BATT LID:CNS2850 REMOTE CONTROL UNIT,BATT LID:CNS3477 REMOTE CONTROL UNIT (SAME AS DEH-P8000R) REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL CMPLETE UNIT REMOTE CONTROL,BATT LID:CNS2850 REMOTE CONTROL UNIT*BATT LID:CNS3383 REMOTE CONTROL UNIT*BATT LID:CNS4139 REMOTE CONTROL UNIT*BATT LID:CNS4139 REMOTE CONTROL UNIT*BATT LID:CNS4139 REMOTE CONTROL UNIT*BAT LID:CNS4948 REMOTE CONTROL UNIT**BAT LID:CNS3383 REMOTE CONSOLE UNIT REMOTE CONTROL UNIT REMOTE CONTROL/DISPLAY ASSY REMOTE CONTROL UNIT*BATT LID:CNS3383 REMOTE CONTROL UNIT*BATT LID:CNS3383 REMOTE CONTROL/DISPLAY ASSY REMOTE CONTROL UNIT**BATT LID:CNS3383 REMOTE CONTROL UNIT*BAT LID:CNS4948 REMOTE CONTROL UNIT**BATT LID:CNS3571 REMOTE CONSOLE UNIT,BATT LID=N/A REMOTE CONSOLE UNIT,BATT LID=VNK-548 REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT,BATT LID=PNW1153 REMOTE CONSOLE UNIT,BATT LID=VNL1293 REMOTE CONSOLE UNIT,BATT LID=VNK1293 REMOTE CONSOLE UNIT,BATT LID=VNK1806 REMOTE CONSOLE UNIT,BATT LID=VNK1806 REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT**BATT LID:VNK1923 REMOTE CONSOLE UNIT,BATT LID=VNK1133 REMOTE CONSOLE UNIT,VNK1293 REMOTE CONSOLE UNIT,VNK1806 REMOTE CONSOLE UNIT,BATT LID=VNK1133 REMOTE CONSOLE UNIT,BATT LID,VNK1133 REMOTE CONSOLE UNIT,VNK1364 REMOTE CONSOLE UNIT,VNK1806

April 30/2001

Model CLD-52 CLD-59 CLD-79 CLD-900 CLD-900 CLD-909 CLD-909(BK) CLD-91 CLD-92 CLD-95 CLD-97 CLD-980 CLD-99 CLD-990 CLD-A100 CLD-D406 CLD-D501 CLD-D502 CLD-D503 CLD-D504 CLD-D505 CLD-D604 CLD-D605 CLD-D606 CLD-D701 CLD-D702 CLD-D703 CLD-D704 CLD-E2000 CLD-E2200LB CLD-M301 CLD-M401 CLD-M403 CLD-M90 CLD-S104 CLD-S105 CLD-S201 CLD-S303 CLD-S304 CLD-V101 CLD-V180 CLD-V190 CLD-V191 CLD-V2400 CLD-V2600 CLD-V2800 CLD-V303T CLD-V500 CLD-V5000 CLD-V510 CLD-V700 CLD-V710 CLD-V720 CLD-V730 CLD-V740 CLD-V750 CLD-V760 CLD-V820 CLD-V830 CLD-V840
Part Number VXX1731 VXX2243 VXX2255 VWY-042 VXX-354 VXX-582 VXX-582 VXX1268 VXX1268 VXX1546 VXX1850 VXX1442 VXX2224 VXX1541 DXX2108 VXX2400 VXX1722 VXX1836 VXX1836 VXX2244 VXX2412 VXX2241 VXX2417 VXX2412 VXX1721 VXX1721 VXX2031 VXX2257 DXR1037 VXX2191 VXX1735 VXX1736 VXX1736 VXX1542 VXX2115 VXX2115 VXX1732 VXX1921 VXX2148 VXX1603 VXX1191 VXX1217 VXX1314 DXR1006 DXR1006 DXR1036 CU-V127 VXX1314 VXX2368 VXX1442 VXX1314 VXX1442 VXX1603 VXX1761 VXX1603 VXX2071 VXX2280 VXX1604 VXX1604 VXX1604

Part Number VXX2068 VXX2277 VXX2453 VXX2543 VXX1314 AXD1254 AXD1367 DXR1004 DXR1025 DXR1025 DXR1004 RPX-003 RPX-003 RPX-003 JT-216 RPX1035 RPX1035 RPX1035 RPX1035 RPX1048 RPX1048 RPX1059 RPX1067 RPX1044 RPX1044 VXX-080 PWW-003 VXX-244 QZX1009 VXX-354 PWW-002 AXD1196 AXD1055 AXD1095 AXD1063 AXD1103 AXD1143 AXD1266 AXD1347 AXD7014 RPX1111 RPX1124 AXD1026 ? AXD1125 AXD1060 AXD1003 AXD1171 AXD1027 AXD1027 VXX-582 VXX1040 VXX1133 VXX1122 VXX1244 VXX1254 VXX1249 VXX1268 VXX1351 VXX1268
Description REMOTE CONTROL **BAT LID:PZN1012 REMOTE CONTROL UNIT,BATT LID:VNK2805 REMOTE CONTROL UNIT*BATT LID:VNK3703 REMOTE CONTROL UNIT*BATT LID:VNK3703 REMOTE CONSOLE UNIT,BATT LID=VNK1293 REMOTE CONSOLE UNIT,BATT LID=VNK1498 REMOTE CONSOLE UNIT**BATT LID=AZN2195 REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT,BATT LID=DMA-149 REMOTE CONSOLE UNIT,BATT LID:DMA-149 REMOTE CONSOLE UNIT,BATT LID=DMA-149 REMOTE CONSOLE UNIT,BATT LID=RNM-267 REMOTE CONSOLE UNIT,BATT LID=RNM-267 REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT,****DISCON'T REMOTE CONSOLE UNIT,BATT LID=VNK-634 REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT,BATT LID=VNK-634 REMOTE CONSOLE UNIT,BATT LID=AZN1856 REMOTE CONSOLE UNIT,BATT LID=AZA1302 REMOTE CONSOLE UNIT,BATT LID=AZA1302 REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT**BATT LID=PZN1012 REMOTE CONSOLE UNIT,BATT LID=PZN1001 REMOTE CONSOLE UNIT,BATT LID=PZN1001 REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT REMOTE CONTROL UNIT**BATT LID:AZH1035 REMOTE CONSOLE UNIT REMOTE CONTROL UNIT**BATT LID:N/A REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT,BATTERY COVER AZN1970 REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT**BATT LID:N/A REMOTE CONSOLE UNIT*****SALES ITEM REMOTE CONSOLE UNIT,BATT LID=AZN1940 REMOTE CONTROL UNIT**BATT LID:AZA1138 REMOTE CONTROL UNIT**BATT LID:AZN1051 REMOTE CONSOLE UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT
Model CU-CLD029 CU-CLD034 CU-CLD038 CU-CLD039 CU-CLD040 CU-CLD046 CU-CLD047 CU-CLD048 CU-CLD051 CU-CLD052 CU-CLD063 CU-CLD064 CU-CLD067 CU-CLD068 CU-CLD069 CU-CLD070 CU-CLD075 CU-CLD076 CU-CLD084 CU-CLD085 CU-CLD090 CU-CLD093 CU-CLD098 CU-CLD102 CU-CLD104 CU-CLD106 CU-CLD112 CU-CLD114 CU-CLD117 CU-CLD120 CU-CLD121 CU-CLD126 CU-CLD128 CU-CLD134 CU-CLD135 CU-CX007 CU-DC002 CU-DC015 CU-DC019 CU-DC020 CU-DC020 CU-DV001 CU-DV004 CU-DV008 CU-DV011 CU-DV017 CU-DV018 CU-DV019 CU-DV020 CU-DV022 CU-DV026 CU-DV030 CU-DV036 CU-DV048 CU-DV049 CU-DV051 CU-GR001 CU-HT004 CU-HTV001 CU-HTV002

Description REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT:LID AZN2256 REMOTE CONTROL UNIT REMOTE CONSOLE UNIT REMOTE CONTROL UNIT{INCORRECT CU-RX303 IN IM} REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT*BATT LID:AZA7281 REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT LID:AZA7204 REMOTE CONTROL REMOTE CONTROL REMOTE CONTROL UNIT**BATT LID:XZN3065 REMOTE CONTROL UNIT *******BAT.LID AZA7204 REMOTE CONTROL UNIT**BAT LID:AZN2256 REMOTE CONTROL,BATT LID:AZN2256 REMOTE CONTROL UNIT**BATT LID:N/A REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT,BATT LID=AZN1846 REMOTE CONSOLE UNIT REMOTE CONTROL(OPTION DID NOT COME WITH) REMOTE CONTROL**BATT LID:CNS2850 REMOTE CONTROL UNIT**BATT LID:CNS3091 REMOTE CONTROL UNIT,BATT LID:CNS3365 REMOTE C0NTROL UNIT**BATT LID:CNS3383 REMOTE CONTROL UNIT**BATT LID:CNS3091 REMOTE CONTROL UNIT,BATT LID:CNS3383 REMOTE CONTROL UNIT,BATT LID:CNS3383 REMOTE CONTROL UNIT**BAT LID:CNS3091 REMOTE CONTROL UNIT*BATT LID:CNS4139 REMOTE CONTROL UNIT*BATT LID:CNS4139 REMOTE CONTROL UNIT*BATT LID:CNS4453 REMOTE CONTROL UNIT,BATT LID:CNS3365 REMOTE CONTROL UNIT REMOTE CONTROL UNIT*BATT LID:CNS4139 REMOTE CONTROL UNIT,BATT LID:CNS3383 REMOTE CONTROL UNIT*BATT LID:CNS4406 REMOTE CONTROL UNIT*BATT LID:CNS4406 REMOTE CONTROL UNIT REMOTE CONTROL FULL SET REMOTE CONTROL UNIT**BAT LID:CZN6410 REMOTE CONTROL UNIT*BATT LID:CNS4406 REMOTE CONSOLE UNIT**BATT LID:CNS2197 REMOTE CONSOLE UNIT**BATT LID:CNS2197 REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT**BATT LID:CNS2197
Model DEH-M990DSP DEH-P3100 DEH-P400 DEH-P4000 DEH-P41 DEH-P410 DEH-P4100 DEH-P545-W DEH-P56 DEH-P600 DEH-P6000 DEH-P6200 DEH-P625 DEH-P645 DEH-P646 DEH-P7000R DEH-P700R DEH-P705 DEH-P715 DEH-P720 DEH-P7200 DEH-P725 DEH-P725-W DEH-P735 DEH-P736 DEH-P75DH DEH-P76DH DEH-P76DH DEH-P77DH DEH-P8000R DEH-P815 DEH-P8200R DEH-P825 DEH-P8250 DEH-P835R DEH-P835R-W DEH-P85DHR DEH-P86DHR DEH-P86DHR DEH-P900R DEH-P9200R DEH-P920R DEH-P946 DEQ-7550 DEX-77 DEX-M400 DEX-M88 DEX-P1 DEX-P78 DEX-P88 DEX-P98R DEX-P99 DV-05 DV-09 DV-333 DV-414 DV-434 DV-500 DV-505 DV-525
Part Number CXA5202 CXB4285 CXB3455 CXB3455 CXB4285 CXB4285 CXB4285 CXB1225 CXB1225 CXB3455 CD-R600 CXB4285 CD-R57 CXB1225 CXB1225 CXB3455 CXB3875 CXA5961 CXA7765 CXB4285 OPTIONAL CXA8688 CXA8774 CXB1160 CXB1160 CXB1160 CXB3488 CZX3231 CXB4285 CXB3875 CXA7610 CXB3875 CXA7610 CXB3875 CXB1159 CXB1163 CXB1160 CXB3488 CZX3231 CXB3875 CXB3875 CXB3875 CXB2655 CXA4690 CXA1610 CXA3703 CXA3573 CXB2764 CXB1160 CXA8688 CXB1159 CXA7610 VXX2602 VXX2532 VXX2702 VXX2599 VXX2703 VXX2398 VXX2540 VXX2643

Description REMOTE CONSOLE UNIT***BATT LID:CNS2432 REMOTE CONTROL UNIT,BATT LID=CNS4948 REMOTE CONTROL UNIT*BAT LID:CNS4948 REMOTE CONTROL UNIT*BAT LID:CNS4948 REMOTE CONTROL UNIT,BATT LID-CNS4948 REMOTE CONTROL UNIT,BATT LID=CNS4948 REMOTE CONTROL UNIT,BATT LID=CNS4948 REMOTE CONTROL UNIT*BAT LID:CNS4139 REMOTE CONTROL (OPTIONAL) REMOTE CONTROL UNIT*BAT LID:CNS4948 REMOTE CONTROL,OPTIONAL SALES ITEM. REMOTE CONTROL UNIT,BATT LID=CNS4948 REMOTE CONTROL, OPTIONAL FROM SALES DEPT. REMOTE CONTROL UNIT*BAT LIF:CNS4139 REMOTE CONTROL UNIT*BATT LID:CNS4139 REMOTE CONTROL UNIT*BAT LID:CNS4948 REMOTE CONTROL UNIT**BAT LID:CNS5032 REMOTE CONTROL UNIT**BATT LID:CNS2850 REMOTE CONTROL UNIT REMOTE CONTROL UNIT,BATT LID=CNS4948 REMOTE CONTROL (CAN USE DEH-P6200 REMOTE) REMOTE CONTROL UNIT,BATT LID:CNS3477 REMOTE CONTROL UNIT,BATT LID:CNS3477 REMOTE CONTROL UNIT*BATT LID:CNS4406 REMOTE CONTROL UNIT*BATT LID:CNS4406 REMOTE CONTROL UNIT*BATT LID:CNS4406 REMOTE CONTROL FULL SET REMOTE CINTROL UNIT**BAT LID:CZN6510 REMOTE CONTROL UNIT,BATT LID=CNS4948 REMOTE CONTROL UNIT,BATT LID=CNS5032 REMOTE CONTROL UNIT**BATT LID:CNS3477 REMOTE CONTROL UNIT,BATT LID=CNS5032 REMOTE CONTROL UNIT,BATT LID:CNS3477 REMOTE CONTROL UNIT,BATT LID=CNS5032 REMOTE CONTROL ASSY*BATT LID:CNS4406 REMOTE CONTROL UNIT*BATT LID:CNS4453 REMOTE CONTROL UNIT*BATT LID:CNC4406 REMOTE CONTROL FULL SET REMOTE CONTROL UNIT**BAT LID:CZN6410 REMOTE CONTROL UNIT,BATT LID=CNS5032 REMOTE CONTROL UNIT,BATT LID=CNS5032 REMOTE CONTROL UNIT,BATT LID=CNS5032 REMOTE CONTROL UNIT*BAT LID:CNS5032 REMOTE CONSOLE UNIT*BATT LID:CNS2432 REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT**BATT LID:CNS1962 REMOTE CONSOLE UNIT*BAT LID:CNS1962 REMOTE CONTROL UNIT*BAT LID:CNS5032 REMOTE CONTROL UNIT**BATT LID:CNS4406 REMOTE CONTROL UNIT,BATT LID:CNS3477 REMOTE CONTROL UNIT**BATT LID:CNS4406 REMOTE CONTROL UNIT,BATT LID:CNS3477 REMOTE CONTROL UNIT**BAT LID:VNK4335 REMOTE CONTROL UNIT*BAT LID:DNK2286 REMOTE CONTROL UNIT REMOTE CONTROL UNIT*BATT LID:AZA7204 REMOTE CONTROL UNIT REMOTE CONTROL UNIT**BATT LID:VNK3864 REMOTE CONTROL UNIT*BAT LID:VNK3703 REMOTE CONTROL**BATT-LID**AZA7204

Model DV-606D DV-626D DV-C302D DV-C503 DVD-V550 DVD-V555 DVD-V7200 DV-K101 DVL-700 DVL-90 DVL-909 DVL-91 DVL-919 DVL-V888 DXR1036 FEX-95 FH-M75 FH-P404 FH-P700 FH-P85 FH-P95 F-X700 GEX-90 GR-777 GR-P720 HTV-2 HTV-C1 HTV-C2 HTZ-C7 JT-216 KEH-8150QR KEH-M5000QR KEH-M7000QR KEH-M7000QR KEH-M8250 KEH-M8500/US KEH-M8500-W KEH-M8550 KEH-P505 KEH-P515 KEH-P525 KEH-P5400 KEH-P5600 KEH-P5700 KEH-P580 KEH-P590 KEH-P606 KEH-P616 KEH-P6200 KEH-P6200-W KEH-P6400 KEH-P6600 KEH-P6600-W KEH-P690 KEH-P7000 KEH-P7200 KEH-P7400-W KEH-P7650 KEH-P770 KEH-P780
Part Number VXX2572 VXX2627 VXX2647 VXX2705 VXX2642 VXX2616 VXX2553 VXX2576 VXX2399 VXX2399 VXX2549 VXX2562 VXX2609 VXX2537 CU-V113A CD-S9 CXA4747 CXB3456 CXB1156 CXA8589 CXA6267 AXD-004 CD-R90 AXD1049 AXD1244 AXD7160 AXD7157 AXD7160 AXD7189 ? CXA3283 CXA2958 CXA2860 CXA3090 CXA4106 CXA5371 CXA6039 CXA4026 CXA9327 CXB1146 CXB1157 CXA9327 CXB1146 CXB1146 CXB3454 CXA7762 CXA9149 CXB1146 CXA7761 CXA7935 CXA9148 CXB1146 CXB1162 CXB4286 CXA5857 CXA7611 CXA7935 CXB1157 CXA5856 CXB3456
Description REMOTE CONTROL UNIT*BAT LID:VNK3864 REMOTE CONTSOLE UNIT,BATT LID=VNK4423 REMOTE CONTROL UNIT**BATT LID:AZA7204 REMOTE CONTROL UNIT**BATT LID:AZA7204 REMOTE CONTROL UNIT REMOTE CONTROL**BATT LID**VNK3703 REMOTE CONTROL UNIT*BATT LID:DNK2926 REMOTE CONTROL UNIT*BAT LID:VNK3703 REMOTE CONTROL UNIT**BATT LID:VNK3864 REMOTE CONTROL UNIT**BATT LID:VNK3864 REMOTE CONTROL UNIT*BATT LID:VNK3703 REMOTE CONTROL UNIT**BATT LID:DNK2286 REMOTE CONTROL UNIT**BAT LID:VNK3703 REMOTE CONTROL UNIT*BAT LID:VNK3703 REMOTE CONTROL UNIT REMOTE CONSOLE UNIT******SALES PRODUCT REMOTE CONSOLE UNIT**BATT LID:CNS2224 REMOTE CONTROL UNIT*BAT LID:CNS4948 REMOTE CONTROL UNIT*BATT LID:CNS4406 REMOTE CONTROL UNIT,BATT LID:CNS3798 REMOTE CONTOL UNIT**BATT LID:CNS6292 REMOTE CONTROL UNIT REMOTE CONSOLE UNIT,***SOLED AT STORE (SALES) REMOTE CONTROL UNIT**BATT LID:AZN1463 REMOTE CONSOLE UNIT,BATT LID=N/A REMOTE CONTROL UNIT REMOTE CONTROL UNIT*BAT LID:RZN1156 REMOTE CONTROL UNIT*BATT LID:AZN2256 REMOTE CONTROL UNIT**BAT LID:103RRC14701R REMOTE CONSOLE UNIT,SALES ITEM***DISCON'T REMOTE CONSOLE UNIT**BATT LID:CZN3224 REMOTE CONSOLE UNIT**BATT LID:CZN3224 REMOTE CONTROL UNIT-CA MODEL*BATT LID:CZN3224 REMOTE CONTROL UNIT-UC MODEL*BATT LID:CZN3224 REMOTE CONSOLE UNIT**BATT LID:CNS2224 REMOTE CONTROL UNIT REMOTE CONSOLE UNIT***BATT LID:CNS2870 REMOTE CONTROL ASSY REMOTE CONTROL UNIT**BATT LID:CNS4139 REMOTE CONTROL UNIT*BATT LID:CNS4139 REMOTE CONTROL UNIT**BATT LID:CNS4406 REMOTE CONTROL UNIT**BATT LID:CNS4139 REMOTE CONTROL UNIT*BATT LID:CNS4139 REMOTE CONTROL UNIT**BATT LID: REMOTE CONTROL UNIT*BAT LID:CNS4948 REMOTE CONTROL UNIT,BATT LID:CNS3383 REMOTE CONTROL UNIT*BATT LID:CNS4050 REMOTE CONTROL UNIT*BAT LID:CNS4139 REMOTE CONTROL UNIT,BATT LID:CNS3383 REMOTE CONTROL UNIT,BATT LID:CNS3628 REMOTE CONTROL UNIT*BATT LID:CNS4050 REMOTE CONTROL UNIT*BAT LID:CNS4139 REMOTE CONTROL UNIT*BAT LID:CNS4453 REMOTE CONTROL UNIT,BATT LID=CNS4948 REMOTE CONTROL UNIT**BATT LID:CNS2850 REMOTE CONTROL UNIT**BATT LID:CNS3477 REMOTE CONTROL UNIT**BATT LID:CNS3628 REMOTE CONTROL UNIT*BATT LID:CNS4406 REMOTE CONTROL UNIT,BATT LID:CNS2850 REMOTE CONTROL UNIT*BAT LID:CNS4948

Model VSX-4800 VSX-49 VSX-4900S VSX-4950S VSX-5000(BK) VSX-504S VSX-505S VSX-511S VSX-512S VSX-52 VSX-53 VSX-5300 VSX-5300S VSX-5400 VSX-5500S VSX-5600 VSX-5700S VSX-59 VSX-604S VSX-605S VSX-7300 VSX-7300S VSX-7500S VSX-79 VSX-9300S VSX-95 VSX-9500S VSX-97 VSX-9700S VSX-99 VSX-9900S VSX-D1S VSX-D1SII VSX-D1SII VSX-D209 VSX-D2S VSX-D307 VSX-D308 VSX-D3S VSX-D407 VSX-D409 VSX-D457 VSX-D458 VSX-D488 VSX-D498 VSX-D506S VSX-D507S VSX-D508 VSX-D509S VSX-D513S VSX-D557 VSX-D557 VSX-D601 VSX-D602S VSX-D606S VSX-D607S VSX-D608 VSX-D613S VSX-D701S VSX-D702S
Part Number AXD1205 AXD7044 AXD1206 AXD1206 AXD1007 AXD7045 AXD7082 AXD1270 AXD1270 AXD1270 AXD1393 AXD1056 AXD1055 AXD1101 AXD1100 AXD1151 AXD1149 AXD7044 AXD7044 AXD7081 AXD1056 AXD1055 AXD1100 AXD7055 AXD1055 AXD1223 AXD1100 AXD1349 AXD1139 AXD7055 AXD1207 AXD1167 AXD1291 CU-VSX053 AXD7245 AXD1348 AXD7161 AXD7206 AXD7055 AXD7155 AXD7246 AXD7156 AXD7207 AXD7211 AXD7226 AXD7124 AXD7158 AXD7178 AXD7248 AXD1384 AXD7166 CU-VSX135-1 AXD1288 AXD1268 AXD7106 AXD7153 AXD7178 AXD1393 AXD1268 AXD1268
Description REMOTE CONSOLE UNIT===>CHANGED TO. REMOTE CONTROL UNIT**BATT LID:AZN7187 REMOTE CONSOLE UNIT,BATT LID=AZN2091 REMOTE CONSOLE UNIT,BATT LID=AZN2091 REMOTE CONTROL UNIT**BATT LID:AZH1017 REMOTE CONTROL UNIT**BATT LID:AZN2256 REMOTE CONTROL UNIT,BATT LID:AZN7327 REMOTE CONSOLE UNIT REMOTE CONSOLE UNIT,BATT COVER:AZN2091 REMOTE CONSOLE UNIT REMOTE CONTROL UNIT,BATT LID:AZN2091 REMOTE CONTROL UNIT**BATT LID:N/A REMOTE CONTROL UNIT**BATT LID:AZH1035 REMOTE CONSOLE UNIT,BATT LID=N/A REMOTE CONSOLE UNIT,BATT LID=AZH1035 REMOTE CONSOLE UNIT,BATT LID=AZN1811 REMOTE CONSOLE UNIT,BATT LID=AZH1035 REMOTE CONTROL UNIT**BATT LID:AZN7187 REMOTE CONTROL UNIT**BATT LID:AZN7187 REMOTE CONTROL UNIT,BATT LID:AZN7187 REMOTE CONTROL UNIT**BATT LID:N/A REMOTE CONTROL UNIT**BATT LID:AZH1035 REMOTE CONSOLE UNIT,BATT LID=AZH1035 REMOTE CONTROL UNIT**BATT LID:AZN7187 REMOTE CONTROL UNIT**BATT LID:AZH1035 REMOTE CONSOLE UNIT,BATT LID=AZN2091 REMOTE CONSOLE UNIT,BATT LID=AZH1035 REMOTE CONSOLE UNIT**BATT LID:AZN2091 REMOTE CONSOLE UNIT,BATT LID=AZH1035 REMOTE CONTROL UNIT**BATT LID:AZN7187 REMOTE CONSOLE UNIT,BATT LID-AZN2091 REMOTE CONSOLE UNIT,BATT LID=AZH1035 REMOTE CONSOLE UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNIT (BAT LID:RZN1156) REMOTE CONSOLE UNIT**BATT LID:AZN2091 REMOTE CONTROL UNIT*BATT LID:RZN1156 REMOTE CONTROL UNIT REMOTE CONTROL UNIT**BATT LID:AZN7187 REMOTE CONTROL UNIT*BATT LID:RZN1156 REMOTE CONTROL UNIT (BAT LAD:AZA7378) REMOTE CONTROL UNIT*BATT LID:RZN1156 REMOTE CONTROL UNIT**BAT LID:RZN1156 REMOTE CONTROL UNIT**BAT LID:AZN7327 REMOTE CONTROL UNIT***BATT LID:RZN1156 REMOTE CONTROL UNIT*BATT LID:AZN7327 REMOTE CONTROL UNIT*BATT LID:AZN7327 REMOTE CONTROL UNIT (BATT LID:AZN7327) REMOTE CONTROL UNIT (BAT LID:AZN7826) REMOTE CONTROL UNIT,BATT LID:AZN2256 REMOTE CONTROL UNIT***** NOT PACKAGED ****** REMOTE CONTROL UNIT**BAT CU-VSX135-LID REMOTE CONSOLE UNIT,BATT LID=AZN2091 REMOTE CONSOLE UNIT REMOTE CONTROL UNIT*BATT LID:AZN7327 REMOTE CONTROL UNIT*BATT LID:AZN7327 REMOTE CONTROL UNIT**BAT LID:AZN7327 REMOTE CONTROL UNIT,BATT LID:AZN2091 REMOTE CONTROL UNIT,BATT LID=AZN2091 REMOTE CONSOLE UNIT