Here you can find all about Pioneer VSX-916-K like manual and other informations. For example: review.
Pioneer VSX-916-K manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Pioneer VSX-916-K please write about it to help other people. [ Report abuse or wrong photo | Share your Pioneer VSX-916-K photo ]
Pioneer VSX-916-K Home Cinema Amplifier, size: 2.9 MB
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
(TV/ SAT) OPT
Connecting other video components
This receiver has audio/video inputs and outputs suitable for connecting analog or digital video recorders, including VCRs, DVDrecorders and HDD recorders.
1 Connect a set of audio/video outputs on the recorder to the DVR/VCR AUDIO and VIDEO inputs on this receiver. Use a stereo RCA phono cable for the audio connection and a standard RCA video cable for the video connection.Connect a set of audio/video inputs on the recorder to the DVR/VCR AUDIO and VIDEO outputs on this receiver. Use a stereo RCA phono cable for the audio connection and a standard RCA video cable for the video connection.Connect a coaxial digital audio output on your video component to the DIGITAL COAX 2 (DVR/VCR) input on this receiver. Use a coaxial digital audio cable for the connection.3
L VIDEO IN
L VIDEO OUT
VCR, DVR, LD player, etc.
1 For better quality, you can also connect with S-video using the S-VIDEO DVR/VCR IN jack. If your video component also has a component video output, you can connect this too. See Using the component video jacks on page 17 for more on this. 2 For better quality, you can also connect with S-video using the S-VIDEO DVR/VCR OUT jack. 3 If your video component only has an optical digital output, you can connect it to the optical input on this receiver using an optical cable. When you set up the receiver you'll need to tell the receiver which input you connected the player to (see The Input Assign menu on page 63).
Using the component video jacks
Component video should deliver superior picture quality when compared to composite video. A further advantage (if your source and TV are both compatible) is progressive-scan video, which delivers a very stable, flicker-free picture. See the manuals that came with your TV and source component to check whether they are compatible with progressive-scan video. Important If you connect any source component to the receiver using a component video input, you must also have your TV connected to this receiver's COMPONENT VIDEO MONITOR OUT jacks.
Connecting to the front panel video terminal
Front video connections are accessed via the front panel using the VIDEO button. There are standard audio/video jacks as well as an Svideo jack and an optical input. Hook them up the same way you made the rear panel connections. Push down on the PUSH OPEN tab to access the front video connections.
S-VIDEO VIDEO VIDEO INPUT L AUDIO
CD-R / TAPE / MD
1 Connect the component video outputs of your source to a set of component video inputs on this receiver. Use a three-way component video cable for the connection. 2 If necessary, assign the component video inputs to the input source you've connected. This only needs to be done if you didnt connect according to the following defaults:
COMPONENT 1 DVD COMPONENT 2 TV COMPONENT 3 DVR See Assigning the component video inputs on page 63 for more on this.
S -VIDEO VIDEO
VIDEO INPUT L AUDIO
Video camera (etc.)
3 Connect the COMPONENT VIDEO MONITOR OUT jacks on this receiver to the component video inputs on your TV or monitor. Use a three-way component video cable.
Using external antennas
Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Using external antennas below).
fig. a fig. b fig. c
To improve FM reception
Use a PAL connector to connect an external FM antenna.
One-touch PAL connector
75 coaxial cable
FM UNBAL 75 AM LOOP ANTENNA
FM UNBAL 75
AM LOOP ANTENNA
To improve AM reception
Connect a 5 to 6 meter length of vinyl-coated wire to the AM antenna terminal without disconnecting the supplied AM loop antenna. For the best possible reception, suspend horizontally outdoors.
1 Pull off the protective shields of both AM antenna wires. 2 Push open the tabs, then insert one wire fully into each terminal, then release the tabs to secure the AM antenna wires. 3 Fix the AM loop antenna to the attached stand. To fix the stand to the antenna, bend in the direction indicated by the arrow (fig. a) then clip the loop onto the stand (fig. b).
If you plan to mount the AM antenna to a wall or other surface, secure the stand with screws (fig. c) before clipping the loop to the stand. Make sure the reception is clear.
Surround back right
Single surround back speaker
The diagrams below show suggested surround and surround back speaker orientation. The first diagram (fig. A) shows orientation with one surround back speaker (or none) connected. The second (fig. B) shows orientation with two surround back speakers connected.
90 to 120
LS RS LS RS
0 to 60
3-D view of 7.1 channel speaker setup
Controls and displays
S- VIDEO VIDEO VIDEO INPUT L AUDIO MCACC SETUP MIC
USB R DIGITAL IN
TUNING / STATION
QUICK SETUP SETUP
1 Input select buttons Press to select an input source. 2 Digital Precision Processing indicator Lights to indicate digital processing. 3 Character display See Display on page 23. 4 MCACC indicator Lights when Acoustic Calibration EQ (page 30) is on (Acoustic Calibration EQ is automatically set to ALL CH ADJUST after the Auto MCACC Setup (page 9) or EQ Auto Setup (page 39)). 5
6 MULTI JOG dial Use the MULTI JOG dial to select various settings and menu options. 7
LISTENING MODE buttons STANDARD Press for Standard decoding and to switch between the various Pro Logic IIx and Neo:6 options (page 28). ADVANCED SURR Use to switch between the surround modes (page 29). ST/DIRECT/AUTO SURR Selects stereo/direct playback (page 30). Also selects Auto Surround (Auto playback on page 28).
8 PHONES jack Use to connect headphones (when connected, there is no sound output from the speakers). 9 STANDBY/ON Switches the receiver between on and standby. 10 VIDEO INPUT See Connecting to the front panel video terminal on page 17. 11 USB interface Connect a USB audio device for playback (see Using the USB interface on page 34). 12 MCACC SETUP MIC jack Use to connect the supplied microphone. 13 MASTER VOLUME dial 14 EON MODE Use to search for programs that are broadcasting traffic or news information (page 48).
TV Use to turn on/off the TV power. TV VOL +/ Use to adjust the TV volume. INPUT SELECT Use to select the TV input signal. TV CH +/ Use to select channels.
RECEIVER CONTROL buttons STANDARD Press for Standard decoding and to switch between the various Pro Logic IIx and Neo:6 options (page 28).
ADV.SURR Use to switch between the various surround modes (page 29). STEREO Selects stereo/direct playback (page 30). Also selects the Auto Surround mode (Auto playback on page 28).
AUTO SURR Selects Auto Surround (Auto playback on page 28). S. RETRIEVER Press to restore CD quality sound to compressed audio sources (page 32). ACOUSTIC EQ Press to select an Acoustic Calibration EQ setting (page 30). SIGNAL SEL Use to select an input signal (page 33).
RESET See Erasing all of the remote control presets on page 53. READ ID See Confirming preset codes on page 53.
9 MULTI OPE Press to perform multi operations (page 53). 10 SHIFT Press to access the DVR controls (above the component control buttons) as well as some receiver controls. 11 INPUT SELECT Use to select the input source (use SHIFT for INPUT SELECT ). 12 SOURCE Press to turn on/off other components connected to the receiver (see page 50 for more on this). Press after MULTI OPE to trigger System Off (page 53). 13 Character display (LCD) This display shows information when transmitting control signals.
The following commands are shown when youre setting the remote to control other components (see Controlling the rest of your system on page 50): SETUP Indicates the setup mode, from which you choose the options below. PRESET See Selecting preset codes directly on page 51. LEARNING See Programming signals from other remote controls on page 51. MULTI OP See Multi Operation and System Off on page 53. SYS OFF See Multi Operation and System Off on page 53. DIRECT F See Direct function on page 53. ERASE See Programming signals from other remote controls on page 51.
14 RECEIVER Switches the remote to control the receiver (used to select the green commands above the number buttons (DIMMER, etc). Also use this button to set up surround sound (page 9, page 36). 15 VOL +/ Use to set the listening volume. 16 MUTE Mutes the sound or restores the sound if it has been muted (adjusting the volume also restores the sound). 17 EFFECT/CH SEL Press repeatedly to select a channel, then use +/ to adjust the level (see Tip on page 44). Also adjusts the level of the Advanced Surround effects, Dolby Pro Logic IIx Music, and Neo:6 Music parameters (page 29). You can then use the +/ buttons to make these adjustments.
Franais Italiano Nederlands
Operating range of remote control
The remote control may not work properly if: There are obstacles between the remote control and the receiver's remote sensor. Direct sunlight or fluorescent light is shining onto the remote sensor. The receiver is located near a device that is emitting infrared rays. The receiver is operated simultaneously with another infrared remote control unit.
1 Press TONE to select the frequency you want to adjust. Press to switch between BASS and TREBLE. 2 Use the MULTI JOG dial to change the amount of bass or treble as necessary. Wait about five seconds for your changes to be input automatically.
Press S. RETRIEVER to switch the sound retriever on or off.
1 The Sound Retriever is only applicable to 2-channel sources.
Playing other sources
1 Turn on the power of the playback component. 2 Turn on the power of the receiver.
Selecting the multichannel analog inputs
If you have connected a decoder or a DVD player with multichannel analog outputs to this receiver (page 14), you must select the analog multichannel inputs for surround sound. Make sure you have set the playback source to the proper output setting. For example, you might need to set your DVD player to output multichannel analog audio.
3 Select the source you want to playback. Use the input select buttons.Start playback of the component you selected in step 1.
Choosing the input signal
Default setting: AUTO You need to hook up a component to both analog and digital inputs on the rear of the receiver to select between input signals.2
3 Press SIGNAL SEL (SIGNAL SELECT) to select the multichannel analog inputs. DVD 5.1ch shows in the display and the ANALOG indicator lights.
Press SIGNAL SEL (SIGNAL SELECT) to select the input signal corresponding to the source component. Each press cycles through the options as follows:
AUTO This is the default setting. The receiver selects the first available signal in the following order: DIGITAL; ANALOG. ANALOG Selects an analog signal. DIGITAL Selects an optical or coaxial digital signal. When set to DIGITAL or AUTO, 2 DIGITAL lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input.
1 If your source is the TVs built-in tuner, switch to the channel you want to watch, otherwise make sure that the TVs video input is set to this receiver (For example, if you connected this receiver to the VIDEO jacks on your TV, make sure that the VIDEO input is selected). Turn down the volume of your TV so that all the sound is coming from the speakers connected to this receiver. 2 This receiver can only play back Dolby Digital, PCM (32 kHz to 96 kHz), DTS and WMA9 Pro digital signal formats. With other digital signal formats, set to ANALOG. You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital connections (Connecting other audio components on page 15) and set the signal input to DIGITAL. Some DVD players dont output DTS signals. For more details, refer to the instruction manual supplied with your DVD player. 3 During playback from the multichannel inputs, you cant use any of the sound features/modes and only the volume and channel levels can be set. You cant listen to your speaker B (Second Zone) system during playback from the multichannel inputs.
TV CTRL TV VOL
1 Switch on the receiver and your TV. Use the RECEIVER button to switch on. If headphones are connected to the receiver, disconnect them. 2 Press RECEIVER on the remote control, then press the SETUP button. An on-screen display (OSD) appears on your TV. Use / / / and ENTER on the remote control to navigate through the screens and select menu items. Press RETURN to confirm and exit the current menu. Press SETUP at any time to exit the System Setup menu. 3 Select the setting you want to adjust.
System Setup 1.Surr Back System 2.Auto MCACC 3.Manual MCACC 4.Manual SP Setup 5.Input Assign 6.Other Setup
Surround back speaker setting
Default setting: Normal (SB) There are several ways you can use the surround back speaker channels with this system. In addition to a normal home theater setup where they are used for the surround back speakers, they can be used for bi-amping the front speakers or as a separate speaker system in another room. 1 Select Surr Back System from the System Setup menu. See Making receiver settings from the System Setup menu above if youre not already at this screen.
1.Surround Back System Surr Back System Normal (SB) ]
If youre using a subwoofer, switch it on and turn up the volume as necessary. 1 Select Manual MCACC from the System Setup menu. See Making receiver settings from the System Setup menu above if youre not already at this screen.
System Setup 1.Surr Back System 2.Auto MCACC 3.Manual MCACC 4.Manual SP Setup 5.Input Assign 6.Other Setup 3.Manual MCACC a.Fine Ch Level b.Fine SP Distance c.EQ AUTO Setting d.EQ Data Copy e.EQ CUSTOM1 Adjust f.EQ CUSTOM2 Adjust g.EQ Data Check : Exit :Return
2 Select the surround back speaker setting. Normal (SB) Select for normal home theater use with surround back speakers in your main (speaker system A) setup. Second Zone Select to use the (surround back) B speaker terminals to listen to stereo playback in another room (see Second Zone speaker B setup on page 59). Front Bi-Amp Select this setting if youre bi-amping your front speakers (see Biamping your front speakers on page 60). 3 When youre finished, press RETURN. You return to the System Setup menu.
Deutsch Franais Italiano Nederlands
Manual MCACC speaker setup
You can use the settings in the Manual MCACC setup menu to make detailed adjustments when youre more familiar with the system. Before making these settings, you should have already completed Automatically setting up for surround sound (MCACC) on page 9. You only need to make these settings once (unless you change the placement of your current speaker system or add new speakers). Important For some of the settings below, youll have to connect the setup microphone to the front panel and place it about ear level at your normal listening position. See Automatically setting up for surround sound (MCACC) on page 9 if youre unsure how to do this. Also see Other problems when using the Auto MCACC Setup on page 11 for notes regarding background noise and other possible interference.
2 Select the setting you want to adjust. If youre doing this for the first time, you might want to make these settings in order. Fine Ch Level Make fine adjustments to the overall balance of your speaker system (see Fine Channel Level below). Fine SP Distance Make precise delay settings for your speaker system (see Fine Speaker Distance on page 38). The last five settings are specifically for customizing the parameters explained in Acoustic Calibration EQ below: EQ AUTO Setting Measure the acoustic characteristics of your room and automatically adjust the frequency balance of your speaker system (see Setting the Acoustic Calibration EQ automatically below). EQ Data Copy Copy Acoustic Calibration EQ settings for manual adjustment (see Copying your Acoustic Calibration EQ settings below). EQ CUSTOM1/2 Adjust Make detailed manual adjustments to your custom Acoustic Calibration EQ settings (see Setting the Acoustic Calibration EQ manually on page 40). EQ Data Check Check the ALL CH ADJUST, FRONT ALIGN and custom settings using the on-screen display (see Checking your Acoustic Calibration EQ settings on page 41).
Fine Channel Level
Default setting: 0dB (all channels) You can achieve better surround sound by properly adjusting the overall balance of your speaker system. The following setting can help you make detailed adjustments that you may not achieve using the Manual speaker setup on page 41. 1 Select Fine Ch Level from the Manual MCACC setup menu. Youll hear test tones from each speaker in turn. Since the left speaker is the main reference speaker, the level is fixed.
3.Manual MCACC a.Fine Ch Level b.Fine SP Distance c.EQ AUTO Setting d.EQ Data Copy e.EQ CUSTOM1 Adjust f.EQ CUSTOM2 Adjust g.EQ Data Check :Return 3a.Fine Channel Level
System Setup 1.Surr Back System 2.Auto MCACC 3.Manual MCACC 4.Manual SP Setup 5.Input Assign 6.Other Setup 4.Manual SP Setup a.Speaker Setting b.Crossover Network c.Channel Level d.Speaker Distance
1 Select Speaker Setting from the Manual SP Setup menu.
4.Manual SP Setup a.Speaker Setting b.Crossover Network c.Channel Level d.Speaker Distance 4a.Speaker Setting Front Center Surr SB [ SUB W. SMALL [ SMALL [ SMALL SMALL x2 : YES ] ] ] ]
2 Select the setting you want to adjust. If you are doing this for the first time, you may want to adjust these settings in order: Speaker Setting Specify the size and number of speakers youve connected (page 42). Crossover Network Specify which frequencies will be sent to the subwoofer (page 43). Channel Level Adjust the overall balance of your speaker system (page 43). Speaker Distance Specify the distance of your speakers from the listening position (page 44). 3 Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen.
2 Choose the set of speakers that you want to set then select a speaker size. Use / to select the size (and number) of each of the following speakers: Front Select LARGE if your front speakers reproduce bass frequencies effectively, or if you didnt connect a subwoofer. Select SMALL to send the bass frequencies to the subwoofer.1 Center Select LARGE if your center speaker reproduces bass frequencies effectively, or select SMALL to send bass frequencies to the other speakers or subwoofer. If you didnt connect a center speaker, choose NO (the center channel is sent to the front speakers). Surr Select LARGE if your surround speakers reproduce bass frequencies effectively. Select SMALL to send bass frequencies to the other speakers or subwoofer. If you didnt connect surround speakers choose NO (the sound of the surround channels is sent to the front speakers or a subwoofer).
Use this setting to specify your speaker configuration (size, number of speakers). It is a good idea to make sure that the settings made in Automatically setting up for surround sound (MCACC) on page 9 are correct.
Deutsch Franais Italiano
2 Choose the frequency cutoff point. Frequencies below the cutoff point will be sent to the subwoofer (or LARGE speakers). 3 When youre finished, press RETURN. You return to the Manual SP Setup menu.
Using the channel level settings, you can adjust the overall balance of your speaker system, an important factor when setting up a home theater system.
1 If the surround speakers are set to NO, the surround back speakers will automatically be set to NO. If you selected Second Zone or Front Bi-Amp (in Surround back speaker setting on page 36) you cant adjust the surround back settings. If you select one surround back speaker only, make sure that speaker is hooked up to the left surround back terminal. 2 For more on selecting the speaker sizes, see Speaker Setting above.
1 Select Channel Level from the Manual SP Setup menu.
4.Manual SP Setup a.Speaker Setting b.Crossover Network c.Channel Level d.Speaker Distance 4c.Channel Level Test Tone Manual
5 When youre finished, press RETURN. You return to the Manual SP Setup menu. Tip You can change the channel levels at any time by using EFFECT/CH SEL and +/ on the remote control. You can set two channel levels: one for DVD 5.1 CH and one for the listening modes.
Select a setup option. Manual Move the test tone manually from speaker to speaker and adjust individual channel levels. Auto Adjust channel levels as the test tone moves from speaker to speaker automatically.
For good sound depth and separation from your system, you need to specify the distance of your speakers from the listening position. The receiver can then add the proper delay needed for effective surround sound. 1 Select Speaker Distance from the Manual SP Setup menu.
4.Manual SP Setup 4d.Speaker Distance L C R RS SBR SBL LS SW [ [ [ [ [ [ [ 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 m m m m m m m m ] ] ] ] ] ] ] :Finish
3 Confirm your selected setup option. The test tones will start after you press ENTER. After the volume increases to the reference level, test tones will be output.
4c.Channel Level Test Tone [ Manual ] 20
a.Speaker Setting b.Crossover Network c.Channel Level d.Speaker Distance
Please Wait. Caution! Loud test tones will be output.
Adjust the level of each channel using /. If you selected Manual, use / to switch speakers. The Auto setup will output test tones in the order shown on-screen:
4c.Channel Level L C R RS SBR SBL LS SW [ [ [ [ [ [ [ 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB ] ] ] ] ] ] ] :Finish
2 Adjust the distance of each speaker using /. You can adjust the distance of each speaker in 0.1 meter increments. 3 When youre finished, press RETURN. You return to the Manual SP Setup menu. Tip For best surround sound, make sure the surround back speakers are the same distance from the listening position.
Adjust the level of each speaker as the test tone is emitted.1
1 If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust the level of each speaker to 75 dB SPL (C-weighting/slow reading). The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual soundtrack.
Using the tuner
Listening to the radio
The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. If you already know the frequency of the station you want, see Tuning directly to a station below. Once you are tuned to a station you can memorize the frequency for recall latersee Saving station presets on the next page for more on how to do this.
High speed tuning Press and hold TUNE / for high speed tuning. Release the button at the frequency you want.
Improving FM stereo sound
If the (tuned) or (stereo) indicators don't light when tuning to an FM station because the signal is weak, press the MPX button to switch the receiver into mono reception mode. This should improve the sound quality and allow you to enjoy the broadcast.
Tuning directly to a station
SR+ DIMMER MIDNIGHT/ LOUDNESS
MULTI OPE S.RETRIEVER ACOUSTIC EQ SIGNAL SEL TOP MENU
MENU SHIFT EFFECT/CH SEL T.EDIT
Sometimes, you'll already know the frequency of the station you want to listen to. In this case, you can simply enter the frequency directly using the number buttons on the remote control.
Press FM or AM to select the band. Press D.ACCESS (Direct Access).
Press FM or AM to select the band.
2 Tune to a station. There are three ways to do this:
Automatic tuning To search for stations in the currently selected band, press and hold TUNE / for about a second. The receiver will start searching for the next station, stopping when it has found one. Repeat to search for other stations. Manual tuning To change the frequency one step at a time, press TUNE /.
3 Use the number buttons to enter the frequency of the radio station. For example, to tune to 106.00 (FM), press 1, 0, 6, 0, 0.
If you make a mistake halfway through, press D.ACCESS twice to cancel the frequency and start over.
Saving station presets
If you often listen to a particular radio station, it's convenient to have the receiver store the frequency for easy recall whenever you want to listen to that station. This saves the effort of manually tuning in each time. This unit can memorize up to 30 stations, stored in three banks, or classes, (A, B and C) of 10 stations each. When saving an FM frequency, the MPX setting (see previous page) is also stored.
Confirming preset codes
Use this feature to check which preset code is assigned to a MULTI CONTROL button.
Default setting: ON You can use the direct function feature to control one component using the remote control while at the same time, using your receiver to playback a different component. This could let you, for example, use the remote control to set up and listen to a CD on the receiver and then use the remote control to rewind a tape in your VCR while you continue to listen to your CD player. When direct function is on, any component you select (using the MULTI CONTROL buttons) will be selected by both the receiver and the remote control. When you turn direct function off, you can operate the remote control without affecting the receiver.1
to select READ ID then press
3 Press the MULTI CONTROL button of the component for which you want to check the preset code then press ENTER. The brand name and preset code appears in the display for three seconds.
Multi Operation and System Off
The Multi Operation feature allows you to program a series of up to 5 commands for the components in your system. For example, you could turn on your TV, turn on your DVD player and start playing the loaded DVD using only two buttons on the remote control. Similar to multi operations, System Off allows you to use one button to stop and switch off a series of components in your system at the same time.2
1 While pressing the RECEIVER button, press the SETUP button. The remote LCD display shows SETUP.
1 You cant use direct function with the TV CTRL function. 2 Before Multi Operation and System Off will work correctly, you must setup the remote to work with your TV and other components (see Setting the remote to control other components on page 50 for more on this). Some units may take some time to power up, in which case multiple operations may not be possible. Power on and off commands only work with components that have a standby mode.
Programming a multi-operation or a shutdown sequence
7 Select the button for the command you want to input. The following remote control commands can be selected:
DVD/LD, TV/SAT, DVR/VCR MONITOR. 5 Hz to 40 MHz dB Signal-to-Noise Ratio. 60 dB
FM Tuner Section
Frequency Range. 87.5 MHz to 108 MHz Usable Sensitivity. Mono:13.2 dBf, IHF (1.3 V/ 75 ) 50 dB Quieting Sensitivity. Mono: 20.2 dB Stereo: 38.6 dBf Signal-to-Noise Ratio. Mono: 73 dB (at 85 dBf) Stereo: 70 dB (at 85 dBf) Distortion.Stereo: 0.5 % (1 kHz) Alternate Channel Selectivity. 60 dB (400 kHz) Stereo Separation. 40 dB (1 kHz) Frequency Response. 30 Hz to 15 kHz (1 dB) Antenna Input (DIN).75 unbalanced
CD, DVR/VCR, CD-R/TAPE/MD, DVD/LD, TV/SAT. 5 Hz to Hz
DVR/VCR REC, CD-R/TAPE/ MD REC. 200 mV/2.2 k
Bass. 6 dB (100 Hz) Treble. 6 dB (10 kHz) Loudness. +10 dB/+5 dB (100 Hz/10 kHz) (at volume level 50 dB)
AM Tuner Section
Frequency Range.531 kHz to kHz Sensitivity (IHF, Loop antenna). 350 V/m Signal-to-Noise Ratio. 50 dB Antenna. Loop antenna
Signal-to-Noise Ratio DIN (Continuous rated power output / 50mW)
CD, DVR/VCR, CD-R/TAPE/MD, DVD/LD, TV/SAT. 88 dB/64 dB
Input (Sensitivity/Impedance) Output (Level/Impedance)
DVR/VCR, DVD/LD, TV/SAT.1 Vp-p/75 DVR/VCR, MONITOR OUT.1 Vp-p/75
Power requirements. AC 220 V to 230 V, 50 Hz/60 Hz Power consumption. 360 W In standby. 0.5 W Dimensions. 420 (W) mm x 158 (H) mm x 352.5 (D) mm Weight (without package). 9.0 kg
Microphone (for Auto MCACC setup). 1
Dry cell batteries (AA size IEC R6). 2
Remote control. 1 AM loop antenna. 1 FM wire antenna. 1 Warranty card. 1 These operating instructions
Note Specifications and the design are subject to possible modifications without notice, due to improvements.
Power cord caution
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or an electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest Pioneer authorized service center or your dealer for a replacement.
4X4-2001 Fostex X-12 X-MAX 250 Blitz BZX8 Kodak ZX1 T 9371 RA-810 System 1400D-M Review MP611 FID 2130 ICD-30 ESL4120 Kitue9JKE NS-P300 Calculator DCR-TRV80 VW246 Reader Asus A9T Finder M-1200 AVR300RDS Exchange Chorus DSP Mcwc52B DVD-HD860 CZ-5000 F5D8235-4 S3500 SM-230 ML-1640 XAA PTS 10 AJ3915 AEG-electrolux N22 Firebox DB-P70 GFA-555 GMX110 57700-10 LN40A750r1F Fryer PHR 8 Profile 632 Street BOB DX-7711 MY521X OM-3TI GD200 Onyx 800R S90ES Satellite 35 S3600 KDC-308 Condens F24 P3416 15HP-1998 DVA-9860R DLS B6A Adapter Guide PRO Touch Easy KDE-37XS955 Model 70 KDL-46EX710 Pocket PC Olympus P-10 HD7810-85 GPS 60 STF 72 MP-370SD PSS-9-PSS-16 Az1316-37B G2400W BGW 750A N4000E KM-1510 Slide TLU-01511B DM PRO SDR-H250 TXL26C20B RS275acwp XAA Mf201plus-MF250-mf350 Olympus T32 Anywhere EBB010 MY850C NWZ-S615F Thunderbird Hd NW TS2GMP320 Canon T90 Y5TY22ca-yard-PRO 330 Plus IC-255E Konica 7165 E1920 SE567 Optiplex 745
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101