Reviews & Opinions
Independent and trusted. Read before buy Pioneer VSX-D514-K!

Pioneer VSX-D514-K

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Pioneer VSX-D514-k Home Cinema Amplifier, size: 3.4 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Pioneer VSX-D514-KAbout Pioneer VSX-D514-K
Here you can find all about Pioneer VSX-D514-K like manual and other informations. For example: review.

Pioneer VSX-D514-K manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Pioneer VSX-D514-K please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Pioneer VSX-D514-K photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
Valentina79991 3:52pm on Thursday, June 17th, 2010 
multipul component in, optical in only one optical input and doesnt switch to component video
DaveD 8:24pm on Wednesday, June 16th, 2010 
multipul component in, optical in only one optical input and doesnt switch to component video

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

1. SPECIFICATIONS

Specifications (VSX-D514)

Amplifier Section

Continuous average power output of 100 watts* per channel, min., at 8 ohms, from 20 Hz to 20,000 Hz with no more than 0.2 %** total harmonic distortion (front). Continuous Power Output (Stereo) Front..100 W (20 20,000 Hz, THD 0.2 %, 8) Continuous Power Output (Surround) Front.. 100 W per channel (1kHz, THD 1.0 %, 8) Center..100 W (1kHz, THD 1.0 %, 8) Surround..100 W per channel (1kHz, THD 1.0 %, 8) Input (Sensitivity/Impedance) CD, DVR/VCR , CD-R/TAPE/MD, DVD/LD, TV/SAT. 200 mV/47 k Frequency Response CD, DVR/VCR, CD-R/TAPE/MD, DVD/LD, TV/SAT. 5 Hz to 100,000 Hz

Video Section

Input (Sensitivity/Impedance) DVR/VCR, DVD/LD, TV/SAT. 1 Vp-p/75 Output (Level/Impedance) DVR/VCR..1 Vp-p/75 Frequency Response DVR/VCR, DVD/LD, TV/SAT] MONITOR.. 5 Hz to 7 MHz +03 dB Signal-to-Noise Ratio.. 55 dB Cross Talk.. 55 dB

FM Tuner Section

Frequency Range. 87.5 MHz to 108 MHz Usable Sensitivity.. Mono:13.2 dBf , IHF (1.3 V/ 75) 50 dB Quieting Sensitivity..Mono: 20.2 dB Stereo: 38.6 dBf Signal-to-Noise Ratio. Mono: 73 dB (at 85 dBf) Stereo: 70 dB (at 85 dBf) Distortion..Stereo: 0.5 % (1 kHz) Alternate Channel Selectivity. 60 dB (400 kHz) Stereo Separation.. 40 dB (1 kHz) Frequency Response. 30 Hz to 15 kHz (1 dB) Antenna Input (DIN).75 unbalanced
Output (Level/Impedance) DVR/VCR REC, CD-R/TAPE/MD REC..200 mV/2.2 k Tone Control BASS.. 6 dB (100 Hz) TREBLE.. 6 dB (10 kHz) LOUDNESS. +6.5 dB/+3 dB (100 Hz/10 kHz) (at volume level50 dB) Signal-to-Noise Ratio (IHF, shor t circuited, A network) CD, DVR/VCR, CD-R/TAPE/MD, DVD/LD, TV/SAT. 96 dB Signal-to Noise Ratio [EIA, at 1 W (1 kHz)] CD, DVR/VCR, CD-R/TAPE/MD, DVD/LD, TV/SAT. 79 dB

AM T uner Section

Frequency Range. 530 kHz to 1,700 kHz Sensitivity (IHF, Loop antenna).350 V/m Signal-to-Noise Ratio.. 50 dB Antenna.. Loop antenna
Specifications (VSX-D414)

Miscellaneous

Power Requirements. AC 120 V, 60 Hz Power Consumption.. 260 W In Standby.. 0.5 W AC Outlet.. 100 W MAX. (SWITCHED) Dimensions. 420 (W) x 158 (H) x 393 (D) mm (16-9/16 (W) x 6-1/4 (H) x 15-1/2 (D) in.) Weight (without package).. 9.3 kg (20.5 lb) Furnished Parts AM loop antenna.. 1 FM wire antenna.. 1 Dry cell batteries (AA size IEC R6). 2 Remote control.. 1 Operating instructions.. 1 Warranty Card..1

CR365 100k V-12

V+12 1SS355

R361 1K

C331 0.01

C332 0.01

100/1W

4.7/50

IC112 (2/2) uPC4570G2

SW 5 + 4

C366 4.7/25

D332 UDZS6.8B

470/10

C333 470/10

C367 0.01 YB

D331 UDZS6.8B
Q362 2SC3326 C R362 B 4.7k E

Q395 2SC3326 C

47/2 *1 R363 100p C363 CH C364 4700p V+12 YB R372 *1

R311 D311

FRONT, REAR R327 R328 R347 R348 GAIN(dB) (Ohm) 15K 14.1/24.1
Center R363 (Ohm) 8.2K 19.3 GAIN(dB)
SW R372 GAIN(dB) (Ohm) 15K 14.2/27.3

3.5 MAIN ASSY (3/3)

TO FM/AM TUNER UNIT

470 470

R5001 R5002 R5003 R5004

STBY C5005 GNDCH VT+12

0.01 C5002

52044-1145

D5007 UDZS10B

FM COMP 2 GNDT

TO TUNER ASSY

TO VIDEO ASSY

VIDEO1

52044-1345

VIDEO11 VIDEO3 AMUTE SWDET SROUT SRIN RMC FUR 4053A 4053 INH SRRXD SRTXD
V1 V2 V3 SWDET SROUT SRIN RMC FUR 4053A 4053INH

100/16 C5007

TUNER CE 11 TUNER DI 10 TUNER CLK 9 TUNER DO GNDT TL 6 +9V 5 TR VSM

T_CE T_DI T_CLK T_DO

Q5001 2SD1664 (PQR)-TRB

R5008 390

R9040 MICSW
VSX-D514/KUXJICA VSX-D414/KUXJICA

0 6.2K

BOARD_DET/6_OHM V+5U

D9012 1SS355 R9035 100K

AC_WP 1W_WP

D9001 D9002

1SS355 1SS355 Q9008 DTA143TK 1SS355

6_OHM MA NECK

D9003 SM+5V 1SS355 D9004 1SS355 D9005
PREG OLDT DCDT A MUTE V-12 V+12 YB YB C116 C115
0.01 0.01 D102 D101 RB501V-40 R9036 4.7 R9008 1K

SPB_RY

SPA_RY

L5002 QTL1013

L9001 ATL7002

ATL7002

R/C_RY

FL AC1

HP. SW

FL AC2

R/C RY

ST5.6V

D+5.6V

SP-B RY

SP-A RY

A 3/3 A

Unit: p-pF or F unless otherwise noted. Ratings: Capacity(F)/Voltage(V) unless otherwise noted. Rated Voltage: 50V expect for electrolytic capacitors.
TO REGULATOR ASSY (FOR FRONT CONTROL)

KP200TA20L

C9001 STBY

R9024 R9025 R9026

C9002 STBY R9033 C9003 R9001 100K ACH0.47pF C9004 0.01 C9005 2.2/50 B Q9001
C9011 0.047/16 R9006 10K D9006 1SS355 D9007 1SS355 V+5U C9014 0.047/16 C E R9002 47K R9007 47K

SWPR L9003 LFEA2R2J-T

FLAC 2 FLAC 1 -VF DISP RST DISP CLK DISP DI

DTC143EK-TLB R9062 470

M CN401

JA8101 (1/2) AKB7131 COAXL8101 QTL1013 R8102 47k IC8101 (6/6) TC74HCU04AF CR8109 2.2k : AWX1082,: AWX8250,8251 R8107 2.2k 0.01 YB 75
V52 IC8101(5/6) TC74HCU04AF 3

100 R8105

QTL1013 L8103

100 C8105

RC8108 stby RC8218 stby

(3/6) IC8101 TC74HCU04AF

47p CH

470p CH C8110

JA8101(2/2) AKBCOAXGP1FA513RZB
(4/6) IC8101 TC74HCU04AF 14 8

L8102 QTL1013

R8116 7

1 YB GNDD V31 V3D

R8110 C8219 stby 100 R8227 0

C8203 0.47 YB R8201 18k

CN1901

C8201 470p

OPT IN1

0.1 YB

RC8115 0.1 YB RV5D1 L8104 R8230 QTL1013 Cstby RC8222 stby GNDD Cstby

R8202 10k

YB 1000p C8205

stby C8206

stby C8207
47/6.3 C8210 X8201 XSS3003 24.576MHz CH 10p

JA8102

IC8101 (1/6) TC74HCU04AF R8111

IC8101 (2/6) TC74HCU04AF

100/16

L8201 QTL1013

VCOM RX2 RX1 AVSS RX0 AVDD AVSS AVSS AVSS R

OPT IN2 10

CN8017 V+5D

VKN1414

R8113 R8114 100k R8115 100k

FRONT OPT GNDD GNDD

R8222 stby

GNDD GNDD OPT OUT

R8221 stby

100 LRCK R8215

100 C8211

R8223 0

R8213 47
V32 L8205 stby R8219 C8216 stby
L8204 L8203 QTL1013 CH470p C8215 YB 0.1 C8225 47/6.3 QTL1013 C8212

(AWX8418)

RR8339 0

R8334 0

B 1/2 DSP ASSY

CH470p C8213

R8338 0

CH 10p

OPT IN3 (R6:NC)

DVSS MCKO1

R8220 0
RX4 AVSS 3 RXAVSS 5 RXAVSS 7 RXIIC 9 P/SN 10 XTLXTLVIN

INTCSN 35

RRRRR8210 stby

IC8201 AK4114VQ

CCLK 34 CDTI 33 CDTO PDN XTI XTO DAUX

DIR&DIT

32 RR8225
L8202 MCKO47 R8209 stby BICK 25 R8216 SDTO 24

R8340 0

IEDO IEIT

R8322 100k R8320 100k

B 1/2 A

R8321 100k

V5A L8401

C8404 CH

470p C8405

0.01 C8406

MCLK DRCS CLK DATA
R8401 R8402 RR100 C8401 stby C8402 stby C8403 stby

C8407 YB 0.1

CN8007

CH CH CH CH CH 5

C8408 47/6.3

DAN202K

DZF2/OVF

AKP7073

I2C SMUTE BICK LRCK SDTI1 SDTI2 SDTI3 SDTO TVDD DZFE DAUX DFS
2 D8402 DAP202K 3 C8409 470p C8410 470p CH C8416 470p CH C8417 470p CH C8001 stby C8002 stby R8009 stby 19
NC(TST) ROUT1 LOUT1 ROUT2 LOUT2 ROUT4 LOUT4 CAD1 CAD0

or AK4628VQ 8ch CODEC

DVDD DVSS PDN TST
R8408 R8409 R8410 R8411 R8414 RRR8416 100

0.01 C8419 CH

100/16 C8420
LOCK DRCS CLK DATA DRDO DRRT

C8414 470p

R8415 470p C8415 C8421 CH 4.7 100p

R8017 0

C8411 470p 100 C470p 100 C8413 470p

BCKO LCKO FDTO SDTO CDTO

IC8401 AK4529VQ

RIN LIN NC

RIN GNDA(DAG) LIN GNDA(DAG) FRO VCOMG FLO RECMUTE SRO GNDA(DAG) SLO GNDA(DAG) SWO GNDA(DAG) CO GNDA(DAG) SBRO GNDA(DAG) SBLO

12 R8417 0

V5D1 IC8901 NJM2391DL1-33 IN OUT 2 V3D

V5D1 R8006

R8016 0

GVCM C8004 stby

C8006 stby R8002 R8003 ATL7002 R8004 ATL7002 R8005 stby LL8003 stby L8004 V5DL8005 RR8011 R8019 RR8015 stby RRC8903 stby GNDD
IC8902 NJU7223DL1-18 IN 2 YB 0.OUT 1

R8012 0

GNDD GCH

C8011 stby C11

BCKI FDTI

CN8003

AKP7070 C8007 CH 470p C8008 CH 470p C8009 YB 0.01 C8010 YB 0.1 GNDD (DSP) GDAC GNDD (DSP) GNDD (DIR)

KN8201 VNF1084 stby

OPTOUT or uGRTN
GNDD (1394) V+5A GNDA (DAG) GNDA (DAG) V+5D V+5D GNDD GNDD OPTIN or DGRTN DGRTN OPTIN or uGRTN uGRTN

C8904 100/16

C8013 stby C8014 stby
NOTES: NO INDICATED PARTS IS. CCSRCH****50-T CKSRYB****50-T CKSRYB333K16-T CKSRYB104K16-T CKSRYB105K6R3-T CEV***M**-T RS1/16S***J-T UNLESS OTHERWISE NOTED

KN8501 VNF1084 stby

GNDD GNDD C8704 C8701 10/16 C8702 YB 0.1 C8703 CH 470p L8701 QTL1013 V38 V3D V5D1 L8702 QTL1013 V56 GNDD

B 2/2 A

R8811 100k R8812 100k R8813 100k

3.7 DSP ASSY (2/2)

HREQ SDO0 SDO1 SDO2 SDO3 VCCS GNDS SDI1 SDI0 FST FSR SCKT SCKR HCKT HCKR VCCQL GNDQ VCCQH PB12 MUTE PB11 PB15 PB14 VCCS GNDS ADO

Q8504 (2/2) UMD2N

JTAG TP5 TP4 TP3 TP2TP1

144143142141140139138137

Q8504 (1/2) UMD2N

470p CH C8513

IECK IERT IEDI 5V IEDI

RRR8706

10/16 C8705 YB 0.1 C8706 CH 470p
IEDI DSRT IECK DSSS CLK DATA

330 R8704 IC8702 330

IECK DSMD MODC IEIT IEDO
GNDD 1 52045-1945 R8807 100k R8806 100k R8805 100k R8802 100k 100k R8801 100k R8810
3V IC8701 Level shifter TC74LVX244FT
TC74VHCT244AFT Level shifter

MUTE MODC ERR

330 R8708 330
1G 1A1 2Y4 1A2 2Y3 1A3 2Y2 1A4 2Y1 GND VCC 2G 1Y1 2A4 1Y2 2A3 1Y3 2A2 1Y4 2A1
1G 1A1 2Y4 1A2 2Y3 1A3 2Y2 1A4 2Y1 GND
VCC 2G 1Y1 2A4 1Y2 2A3 1Y3 2A2 1Y4 2A1

A 3/3 CN112

DSMD DRCS DRRT L H XTL0 R8808 100k LSSN

0 RR8543

CLK R8803 100k DSRT DSSS R8804 100k DSRQ DSDO
MUTE OUT MUTE MODC DEC MUTE DSP DI DSP DO DSP CK DSP RST DSP SS BUSY DSP HREQ DSP MODE DIR DO DIR CS DIR RST DIR ERR XTL0 LSSN GNDD HI-Z ON

R8809 0

FDTO SDTO CDTO BDTO

1394 BCKO LCKI LSSN

1M R8538 R8558 47k 1 B Q8503 UN5112 C 1M R8547 D8502 DAP202K 10k 1 1M R8549 D8503 DAP202K R8548 V3D D8501 1SSE

R8534 10k

R424 D401 DAN202K 100k

L401 LFEA2R2J 220/6.3 -TS 2.2u YB C401 C402 0.01 0.01 C403 YB

C416 STBY

VENC A

FENC A

FENC B

VSS0 AVDD

VDD1 VSS1 X1 X2 IC(VPP) DISPRST DISPCK DISPDI DISPDO DISPRDY
DISPEN NC SRIN AVSS KEY4 KEY3 VDD0 NC
G1 G2 G3 G4 G5 G6 G7 G8 G9 G10

CN101 J31

(VSX-D514 : XWZ3755) (VSX-D414 : XWZ3754)

FRONT DISPLAY ASSY

220p CH

C483 220p CH

R492 R493 R494 R495

100k 100k 100k

4 47k 47k 47k 47k 47k 47k 47k 47k 47k 47k

S2 S3 S4

(402 FL HOLDER VNF1096)

3.TACT SWITCHES

Indicated in VSG1024
51048-1100(11P)(VSX-D514) 51048-0300(3P)(VSX-D414)
POWER SW ASSY S501 : DVD/VCR S502 : TV/SAT S503 : DVD5.1 S504 : DVD/LD S505 : POWER STANDBY/ON S506 : CD S507 : CDR/TAPE S508 : FM S509 : AM
S5 S6 S7 S8 S9 S10 S11 S12 S13 S14 S15 S16 S17 S18 S19 S20 S21 S22
Indicated in SLI-343DCW(STU)-TS
100k 100k 100k 100k 100k 100k 100k 100k 100k 100k 100k 100k 100k 100k 100k 100k 100k 100k
R496 R497 R498 R499 R500 R520 R521 R522 R523 R524 R525 R526 R527 R528 R529 R530 R531 R532

R467 R451 R459 4.7k

S1 S2 S3 S4 S5 S6 S7 S8 S9 S10

F.AV GND VDD

1000p YB 1000p YB R1504 STBY

GNDU F.AV

CN450 550

C453 C454

11 VIDEO LED VCR LED TV 9 LED DVD 8 LED CD 7 LED 6 CDR LED 5 TUNER LED 4 AUX LED 3 F.A

220/35 XCH3011 C414

S505 POWER S506
52151-1110(11P)(VSX-D514)
52151-0310(3P)(VSX-D414) R502 2.7k

CD S507

KEYKEY3 5
S451 RSTEREO/ DIRECT S452 SIGNAL SELECT S453 MIDNIGHT/ LOUDNESS S454 SPEAKER IMPEDANCE S455 VSB MODE S456 TONE S457 QUICK SETUP
S458 ADVANCED SURROUND S459 STANDARD S460 TUNING + S461 TUNING S462 STATION + S463

S466 MUTE S467

CDR/TAPE R507 1.2k S508

52151-0710

S11 S12 S13 S14 S15 S16 S17 S18 S19 S20 S21 S22

51048-0700

S11 S12 S13 S14 S15 S16 S17 S18 S19 S20 S13

R453 820

R461 820

R469 820

7 ENTER 7

FL DIMMER S468

S501 DVD/VCR S502

R456 2.7k

R464 2.7k

IC401 PE5420A

Display U-com

VOL LED

A4 A3 A2 A1 AV4 AV3 AV1 AV2
D20PYY1107E(VSX-D514) D20PYY0307E(VSX-D414)

R452 680

R468 680

FM S509

R454 1.2k

D20PYY0708E

R470 1.2k

R462 1.2k

INPUT ATT S469 MPX

1.8 KEY IN VOLTAGE [V]

1 F.AV 2 GNDU 3 VDD 4 KEYKEYKEYENTER

STATION -

STATION +
W288 S464 S465 S469 S468 W265 S467 W286

BAND (MPX)

MPX (INPUT ATT)
INPUT ATT (PTY SEARCH) (FL DIMMER)

(EON MODE) (MUTE)

O P. SW &

FUNC. KEY ASSY

C CN702
GNDU 2 HP SW 3 A MUTE 4 HP R 5 HP GND 6 HP L

Q H.P ASSY

S504 DVD/LD

11 KN1551 R1552

D501 W300
11 VIDEO LED 10 DVR LED 9 TV LED 8 DVD LED 7 CD LED
6 CDR LED 5 TUNER LED 4 AUX LED 3 F.A 2 GNDU 1 F.AV
POWER SW & FUNCTION KEY

XWZ3763 XWZ3764

S505 POWER

M O P Q

XWZ3768

S506 CD

S507 CDR/TAPE

S508 TUNER (FM)

S509 AUX (AM)

JA1551

S503 TV/SAT (DVD 5.1)

S502 DVR/VCR (TV/SAT)

S501 VIDEO (DVR/VCR)

40 S466 FL DIMMER

R1554 R1553

XWZ3758

ADVANCED SURROUND S451

STEREO/ DIRECT S452

W268 W252 WV401

W275 W267

WDISPDO 10 DISPRDY 9 DISPEN 8 SRIN 7 SROUT 6 RMC 5 1WUP 4 D+5.6V 3 STBY+5.6V 2 GNDU 1 GNDU 7 7

17 CN401 17

C442 1
7 LED 6 ENTER 5 FENC A 4 FENC B 3 GNDU 2 ENC B 1 ENC A
17 FLACFLAC-VF 14 DISPRST 13 DISPCK 12 DISPDI
W253 W284 WW272 W269 W270 W271 W273 X401 W251

FRONT DISPLAY

XWZ3755 XWZ3756

ED UND S451

MIDNIGHT/ LOUDNESS (MIDNIGHT) S453
SPEAKER (SPKR IMPEDANCE) (LOUDNESS) S454
SBch MODE (VSB MODE) S455

S456 TONE

S457 QUICK SETUP

4 KEYKEYKEYENTER

P FRONT KEY ASSY

W296 6

C403 CN402
1 VSSSISOSCKNC 6 RESET 7 VDD 8 VPP(IC) 9 NC

N R.ENCODER ASSY

R.ENCODER

XWZ3766 XWZ3822

7 LED 6 ENTER 5 FENC A 4 FENC B 3 GNDU 2 VENC B 1 VENC A

2 W291 W289

S511 ENTER
17 FLACFLAC-VF 14 DISPRST 13 DISPCK 17 R412 R414 R416 RDISPDI 11 DISPDO 10 DISPRDY Q442 R411
R490 R489 R488 R487 R486 R484 R485 R483 R482 RDISPEN 8 SRIN 7 SROUT 6 RMC 5 1WUP 4 D+5.6V R404 D404 C441 DSTBY+5.6V 2 GNDU DGNDU

OTHERS

J42 J47 J43 J41 Jumper Wire Jumper Wire Jumper Wire 7P Jumper Wire 11P D15A07-075-2651 D20PYY0630E D20PYY0708E D20PYY1107E

SEMICONDUCTORS

IC108 IC101 IC103-IC105, IC107 BD3813KS BD3841FS HA17558AF

COILS AND FILTERS

L9001, L9002 Chip Solid Inductor ATL7002

LFEA2R2J QTL1013

XKB3037
L9003 L101-L104, L111, L112, L5002 Chip Solid Inductor

JA105 6P Pin Jack

CAPACITORS
C9003 (0.22F/5.6V) C151, C152, C243, C244, C263 C317, C318, C323, C324 C343, C344, C363 C1031, C1041, C117, C118 C205-C208, C245-C248, C265 C267 C203, C204 C366 C123-C128, C131-C138 C141, C142, C167, C168 C209, C210, C213, C214 C249, C250, C269, C270 C301-C306, C321, C322 C341, C342, C361, C362 C5007 C169 C201, C202, C241, C242 C261, C262, C9005 C9007 C325, C326, C345, C346, C365 C155, C156 C333, C334 C9013 C165, C166, C370 C170 C320, C392, C5001, C9015, C9016 C115, C116, C153, C154, C171 C179, C180, C199, C215-C218 C251, C252, C266, C271, C272 C319, C327-C330, C347, C348
ACH7144 CCSRCH101J50 CCSRCH101J50 CCSRCH101J50 CCSRCH220J50 CCSRCH331J50 CCSRCH331J50 CCSRCH471J50 CEANP4R7M50 CEAT100M50 CEAT100M50 CEAT100M50 CEAT100M50 CEAT100M50 CEAT100M50 CEAT101M16 CEAT221M6R3 CEAT2R2M50 CEAT2R2M50 CEAT331M6R3 CEAT470M25 CEAT470M50 CEAT471M10 CEAT471M6R3 CEAT4R7M50 CKSQYB104K16 CKSRYB102K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB104K16 CKSRYB105K10 CKSRYB223K25 CKSRYB472K50 CKSRYB472K50 CKSRYB473K16 CKSRYB562K50 CKSRYF104Z16
IC8201 IC8401 IC8501 IC8901 IC8902 IC8101 IC8701 IC8702 IC8502 Q8504 Q8503 D8501 D8401 D8402, D8502, D8503 AK4114VQ AK4628VQ DSPD56367PV150 NJM2391DL1-33 NJU7223DL1-18 TC74HCU04AF TC74LVX244FT TC74VHCT244AFT TC7WU04FU UMD2N UN5112 1SS355 DAN202K DAP202K
L8002, L8004, L8501, L8502 Chip Solid Inductor L8101-L8104, L8201, L8203, L8204 L8401, L8402, L8504, L8701, L8702 Chip Solid Inductor ATL7002 QTL1013 QTL1013
C8209, C8210 C8421 C8107, C8112 C8007, C8008, C8109, C8201, C8212 C8214, C8404, C8409-C8414 C8416, C8417, C8419, C8505, C8507 C8509, C8511, C8512, C8515, C8518 C8520, C8522, C8524, C8526, C8528 C8530, C8532, C8534, C8536, C8539 C8541, C8543, C8545, C8551, C8703 C8706 C8548, C8549 C8701, C8704 C8105, C8406, C8415, C8546, C8547 C8902, C8904 C8217, C8225, C8408 C8204, C8555 C8009, C8104, C8114, C8405, C8418 C8517, C8554 C8010, C8115, C8202, C8207, C8213 C8215, C8407, C8420, C8422, C8504 C8513, C8521, C8523, C8525, C8527 C8529, C8531, C8533, C8535 C8537, C8538, C8540, C8542, C8544 C8550, C8702, C8705, C8901, C8903 C8110, C8516 C8514 C8203 CCSRCH100D50 CCSRCH101J50 CCSRCH470J50 CCSRCH471J50 CCSRCH471J50 CCSRCH471J50 CCSRCH471J50 CCSRCH471J50 CCSRCH471J50 CCSRCH471J50 CCSRCH471J50 CCSRCH8R0D50 CEVW100M16 CEVW101M16 CEVW101M16 CEVW470M6R3 CKSRYB102K50 CKSRYB103K50 CKSRYB103K50 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB105K6R3 CKSRYB333K16 CKSRYB473K50

1.When function chage 0 120ms pass 180ms pass 240ms pass 300ms pass 440ms pass 500ms pass
A.MUTE (port) E-volume (BD3813)

"L"(mute)

"L"or"H"

Mute data

Last data
function SW (BD3841) video select (NJM2595)

Now data

Full open

New data

DSP or direct change (BD3813) Now data speaker relay (port) Now data
condition of mute cancel (system mute & E-volume mute) 1) when tuner mute during Tuner function 2) when communicate to DSP 3) when initial processing 4) when detect trouble of AMP DC 5) when detect overload of AMP 6) when Power off 7) when muting by key input
2.When except function chage 0 120ms pass 180ms pass 240ms pass 300ms pass 440ms pass 500ms pass

A.MUTE (port)

E-volume (BD3812,13) Mute data DSP or direct change (BD3813) Now data speaker relay (port) Now data

New or last data

7.1.3 DETECTION CIRCUIT
1.DC Detection Circuit Diagram:
+5V AMP u-con IC9001 DC PROT IC601, IC602 DC DET. Q696 L : ON H : OFF Pin 23
2. Overload Detection Circuit Diagram:
+5V u-con IC9001 OL DET L : ON H : OFF Pin 73
Q605, Q606, Q633, Q683 Q655, Q656 O.L. DET IC601, IC602
3. PCB Board Protection Circuit Diagram

Main Assy

Amp Input Assy
Amp & Primary Assy Speaker

U-com IC9001 Pin 24

7.1.4 AMPLIFIER SYSTEM PROTECTION OPERATION SPECIFICATION
1. DC-abnormality detection DC detection is only enabled 2 seconds after power-on. If there is a fault in the power amplifier or a high-level signal lower than 5 Hz is input, the DC_DET port becomes L. If the L is detected, the microprocessor will perform as following flow chart. In the case of simultaneous detection with the overload protection circuit, DC-abnormality detection is performed preferentially to overload detection. When a DC abnormality is detected, A.MUTE* is turned on, speaker relay is turned off, then "AMP_ERR" flashes on the display.
*A.MUTE : Audio mute command

VLOAD 60 VDDIO FIPIO FIPIO FIPIO FIPIO FIP24/PIO FIP25/PIO FIP26/PIO FIP27/PIO FIP28/PIO FIP29/PIO FIP30/PIO FIP31/PIO FIP32/PIO FIP33/PIO FIP34/PO FIP35/PO FIP36/PO FIP37/PO
VF +5V S11 S12 S13 S14 S15 S16 S17 S18 S19 S20 S21 S22 FUNC_VIDEO LED FUNC_VCR/DVR LED FUNC_TV/SAT LED FUNC_DVD/LD LED FUNC_CD LED FUNC_CDR/TAPE LED
DISP RESET DISP CK DISP DTI DISP DTO DISP RDY NC NC NC NC DISP EN NC(PD)(MULTIROOM SRIN) SR IN GND KEY IN4 KEY IN3

P27/SCK1 C-MOS

IO 10 P24/BUSY C-MOS IO 11 P23 IO 12 P22 IO 13 P21/SO3
IO 14 P20/SCK3 C-MOS IO 15 P00/INTP0 C-MOS IO 16 P01/INTP1 C-MOS IO 17 P02/TAVSS I 19 ANI3 I 20 ANI2 COPM COMP COMP COMP C-MOS
P46/FIP38 P47/FIP39 P50/FIP40 P51/FIP41 P52/FIP42 P53/FIP43 P54/FIP44 P55/FIP45 P56/FIP46 P57/FIP47 P60/FIP48 P61/FIP49 P62/FIP50 P63/FIP51 P64/FIP52 VDD0 AVDD VSS0 ANI0 ANI21 O O IO IO IO IO IO IO IO IO IO IO IO IO IO I I
FUNC_TUNER LED FUNC_AUX LED MCACC LED VOLUME LED 1W WUP NC NC NC(PU)(KEY5) TEST NC(PU)(MIC IN) EN A EN B FEN B FEN A NC(PU)(HP IN) +5V +5V GND KEY IN1 KEY IN2
No. VDD1 VSS1 X1 X2 IC(VPP) RESET P27/SCK1 P26/SI1 P25/SO1 P24/BUSY P23 P22 P21/SO3 P20/SCK3 P00/INTP0 P01/INTP1 P02/T1 AVSS ANI3 ANI2 ANI1 ANI0 VSS0 AVDD VDD0 P64/FIP52 P63/FIP51 P62/FIP50 P61/FIP49 P60/FIP48 P57/FIP47 P56/FIP46 P55/FIP45 P54/FIP44 P53/FIP43 P52/FIP42 P51/FIP41 P50/FIP40 P47/FIP39 P46/FIP38 Port +5V GND Resonator Resonator GND DISP RESET DISP CK DISP DTI DISP DTO DISP RDY NC NC NC NC DISP EN NC SR IN GND KEY IN4 KEY IN3 KEY IN2 KEY IN1 GND '+5V '+5V NC FEN A FEN B EN B EN A NC TEST NC NC NC 1W WUP VOL LED MCACC LED FUNC/AUX FUNC_TUNER Pin Name I/O I I I I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I I I I I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O O O output wakeup signal to main u-com LED Output LED Output LED Output LED Output
Pin Function positive power supply ground potential crystal connection for system clock oscillation crystal connection for system clock oscillation receive reset signal from main u-com clock signal from main u-com datain from main u-com data out to main u-com ready signal from main u-com
enable signal from main u-com remote control signal input from main room ground potential for A/D converter
ground potential for ports analog power voltage input to A/D converter positive power supply to ports MULTI JOG(Right) MULTI JOG(Left) VOLUME JOG1(-) VOLUME JOG1(+) test mode input for checker

No. 79 80

Port FIP37/P45 FIP36/P44 FIP35/P43 FIP34/P42 FIP33/P41 FIP32/P40 FIP31/P37 FIP30/P36 FIP29/P35 FIP28/P34 FIP27/P33 FIP26/P32 FIP25/P31 FIP24/P30 FIP23 FIP22 FIP21 FIP20 VDD2 VLOAD FIP19 FIP18 FIP17 FIP16 FIP15 FIP14 FIP13 FIP12 FIP11 FIP10 FIP9 FIP8 FIP7 FIP6 FIP5 FIP4 FIP3 FIP2 FIP1 FIP0
Pin Name FUNC_CDR FUNC_CD FUNC_DVD FUNC_TV FUNC_VCR FUNC_VIDEO S22 S21 S20 S19 S18 S17 S16 S15 S14 S13 S12 S11 '+5V VF S10 S9 S8 S7 S6 S5 S4 S3 S2 S1 G10 G9 G8 G7 G6 G5 G4 G3 G2 G1
I/O O O O O O O I/O I/O I/O I/O I/O I/O I/O I/O O O O O O O O O O O O O O O O O O O O O O O O O LED Output LED Output LED Output LED Output LED Output LED Output Display Display Display Display Display Display Display Display Display Display Display Display

Pin Function

positive power supply to FIP controller. pull down resistor connection of FIP controller Display Display Display Display Display Display Display Display Display Display Display Display Display Display Display Display Display Display Display Display
7 BD3841FS (MAIN ASSY : IC101)

9ch Function Switch

7 Block Diagram
RECC1 RECA1 RECC2 RECA2 RECB1 RECB2 DGND OUT1 VCC OUT2 BIAS VEE INI1
* F-SW1 : INPUT FUNCTION1 F-SW2 : INPUT FUNCTION2

Description of terminal

Terminal Number 15 16
Terminal Name INA1 INA2 INB1 INB2 INC1 INC2 IND1 IND2 INE1 INE2 INF1 INF2 ING1 ING2 INH1 INH2
Description A 1ch input terminal A 2ch input terminal B 1ch input terminal B 2ch input terminal C 1ch input terminal C 2ch input terminal D 1ch input terminal D 2ch input terminal E1ch input terminal E 2ch input terminal F 1ch input terminal F 2ch input terminal G1ch input terminal G2ch input terminal H 1ch input terminal H 2ch input terminal

Terminal Number 31 32

Terminal Name INI2 INI1 OUT2 OUT1 RECC2 RECC1 RECB2 RECB1 RECA2 RECA1 VCC BIAS VEE DA

CL DGND

Description I 2ch input terminal I 1ch input terminal 2ch output terminal 1ch output terminal C 2ch REC output terminal
C 1ch REC output terminal B 2ch REC output terminal B 1ch REC output terminal
A 2ch REC output terminal A 1ch REC output terminal (+)Power supply terminal Bias input terminal

(-)Power supply terminal

Serial date anlatch input terminal
Serial clock input terminal Digital ground terminal
7 BD3813KS (MAIN ASSY : IC108)
6.1ch Audio Sound Processor

GOUTFR

GOUTFL
INFRA INFLA INSWA INSRA INSLA
GND8 OUTSW GND7 OUTSR GND6 OUTSL GND5 OUTC GND4 OUTSB VCC GND3 VEE VDD
INCA INSBA INFRB INFLB INSWB

SW2 A A B B

A B SW3

INSRB INSLB INCB INSBB

A A B B

16 LOGIC 15

GOUTSW
Terminal Terminal Description Number Name 1 GND1 Ground terminal 2 GOUTSW Sub woofer input gain output

Anode Connection 10G S1 P1 AUTO P2 SB P3 DIGITAL P4 ANALOG P5 DIGITAL (L) P6 DTS P7 MPEG (L) P8 P9 MPEG (R) P10 DIGITAL (R) P11 PRO LOGIC P12 Neo:6 P13 VIR.SB P14 ADV.SURR. P15 X P16 DIRECT P17 MIDNIGHT P18 LOUDNESS P19 P20 SLEEP STEREO P21 P22 MONO
a1 a2 h j k b f m g c e r p n d1 d2 Dp2 Dp1 S1 S4 S2 S3
ATT EON TUNED RDS S1 A B 1a 1b 1f 1g 1c 1e 1d

2a 2b 2f 2g

2c 2e 2d

8. PANEL FACILITIES

Front Panel
1 STANDBY/ON Switches the receiver between on and standby.
2 INPUT SELECT buttons Use to select the input source. 3 STATION (+/) buttons Select station presets when using the tuner. 4 TUNING (+/) buttons Select the frequency when using the tuner. 5 Remote sensor Receives the signals from the remote control. 6 ENTER
MUTE Use to mute the sound or restore the sound if it has been muted. LISTENING MODE buttons STANDARD Press for Standard decoding and to switch between the various P Logic II options. ro ADVANCED SURROUND Use to switch between the various surround modes. STEREO/DIRECT Switches direct playback on or off Direct. playback bypasses the tone controls and channel levels for the most accurate reproduction of a source.
7 MULTI JOG dial The MULTI JOG dial performs a number of tasks. Use it to select options after pressing TONE, QUICK SETUP or TUNER EDIT. 8 PHONES jack Use to connect headphones. 9 TUNER EDIT Press to memorize and name a station for recall. 10 CLASS Switches between the three banks (classes) of station presets.
16 SIGNAL SELECT Use to select between an analog or digital signal. 17 MIDNIGHT/LOUDNESS Use to switch to Midnight or Loudness listening. 18 SPEAKER IMPEDANCE Use to switch the speaker impedance when using low-impedance speakers. 19 VSB MODE Press to switch the Virtual Surround Back mode on or off. 20 TONE Press this button to access the bass and treble controls, which you can then adjust with the MULTI JOG dial. QUICK SETUP MASTER VOLUME
11 MPX Press the MPX button to receive a radio broadcast in mono. 12 INPUT ATT Use to attenuate (lower) the level of an analog input signal to prevent distortion. 13 FL DIMMER Use this button to make the fluorescent display (FL) dimmer or brighter.

When the headphones are connected, there is no sound output from the speakers.

Display

1 SIGNAL SELECT indicators Lights to indicate the type of input signal assigned for the current component: AUTO : Lights when AUTO signal select is on. DIGITAL : Lights when a digital audio signal is detected. 2 DIGITAL : Lights when a Dolby Digital signal is detected. ANALOG : Lights when an analog signal is detected. DTS : Lights when a source with DTS audio signal is detected. SB : Lights when a source (such as DTS-ES and Dolby Digital EX) with surround back channel information is detected. 2 When the Standard mode of the receiver is on , this lights to indicate decoding of a DTS signal. DIGITAL When the Standard mode of the receiver is on , this lights to indicate decoding of a Dolby Digital signal. PRO LOGIC II When the Standard mode of the receiver is on, this lights to indicate Prologic II decoding. 5 VIR.SB Lights during Virtual surround back processing. 6 DIRECT Lights when source direct playback is selected. Direct playback bypasses the tone controls and channel levels for the most accurate reproduction of a source.
7 MIDNIGHT Lights during Midnight listening. 8 SLEEP Lights when the receiver is in sleep mode. 9 ATT Lights when INPUT ATT is used to attenuate (reduce) the level of the input signal (can only be used with an analog signal). 10 Speaker indicator Shows if the speaker system is on or not. SP 3 A means speakers are switched on. SP 3 means the headphones are connected. 11 Character display
12 ADV. SURR. (Advanced Surround) Lights when one of the Advanced Surround listening modes of the receiver is selected. 13 LOUDNESS Lights during Loudness listening. 14 TUNER indicators STEREO Lights when a stereo FM broadcast is : being received in auto stereo mode. MONO : Lights when the mono mode is set using the MPX button. TUNED : Lights when a broadcast is being received. 15 Master volume level Shows the overall volume level. dB indicates --the minimum level, and 0dB indicates the maximum level.

Depending on the level settings you make for each channel, the maximum level can range between 10dB and 0dB.

Remote Control

STEREO Switches direct playback on or off Direct. playback bypasses the tone controls and channel levels for the most accurate reproduction of a source.
MIDNIGHT/LOUDNESS Use to switch to Midnight or Loudness listening. TOP MENU (DVD control) Displays the disc top menu of a DVD. TUNER EDIT(receiver control) Press to memorize and name a station for recall. 4 DVD Use to switch over to the DVD controls on the remote control.
The DVD controls on the remote control (TOP MENU, MENU, | / \ / / and ENTER/SETUP buttons) can only be used for DVD control after pressing DVD/LD on the remote. See below for more on the seperateDVD CONTROL buttons. 5 VOLUME Use to set the overall listening volume.
AUDIO TUNING STATION DISPLAY
CH SELECT Use to select a channel when setting up the surround sound of the receiver. TEST TONE Use to sound the test tones when setting up the surround sound of the receiver.
LEVEL +/ Use to set up the levels of the surround sound of the receiver.
EFFECT +/ Use to add or subtract the amount of effect in the Advanced Surround modes.
1 RECEIVER Switches the receiver between on and standby.
STANDARD Press for Standard decoding and to switch between the various Pro Logic II options. ADVANCED SURROUND Use to switch between the various surround modes.
MUTE Use to mute the sound or restore the sound if it has been muted. 7 SLEEP Use to put the receiver in sleep mode and select the amount of time before the receiver turns off. FL DIMMER Use this button to make the fluorescent display (FL) dimmer or brighter. INPUT ATT Use to attenuate (lower) the level of an analog input signal to prevent distortion. 8 INPUT SELECTOR buttons Use to select the input source. 9 MENU (DVD control) Use to access different menus associated with your DVD player.
MPX Use to switch between auto stereo and mono reception of FM broadcasts. If the signal is weak then switching to mono will improve the sound quality. DISPLAY Use to switch the display between the station preset name and the frequency. 13 DVD CONTROL buttons You can use these buttons to control a Pioneer DVD player connected to your system. Button DVD AUDIO SUBTITLE What it does T urns DVD power on/off. Changes the audio language or channel. Displays/changes the subtitles included in multilingual DVDVideo discs. Press to start fast reverse scanning. Starts playback. Press to start fast forward scanning. Stops playback. Pauses a disc thats playing, or restarts a paused disc. Skips to the star of the current t track or chapter, then to previous tracks/chapters. Skips to the next track or chapter.
10 | / \ / / and ENTER/SETUP buttons Use these arrow buttons when setting up your surround sound system. These buttons are also used to control DVD menus/options. 11 RECEIVER Use to switch to the receiver controls on the remote control. Also used when setting up the surround sound for the receiver. 12 Tuner controls The TUNING +/ buttons can be used to find radio frequencies. TheSTATION +/ buttons can be used to select preset radio stations. CLASS Use to switch between the three banks (classes) of station presets.

doc1

AUDIO/VIDEO MULTI-CHANNEL RECEIVER

VSX-D514

DVD/LD

DVD 5.1

TV/SAT

DVR/VCR

MULTI JOG

CD-R/ TAPE/MD

MASTER VOLUME

STANDBY/ON

STATION

TUNING

STANDARD

ADVANCED SURROUND

STEREO/ DIRECT

SIGNAL SELECT

MIDNIGHT/ LOUDNESS

SPEAKER IMPEDANCE

VSB MODE

QUICK SETUP

LISTENING MODE

TUNER EDIT

INPUT ATT

FL DIMMER

PHONES

ORDER NO.

RRV2936

VSX-D514-K

VSX-D514-S
VSX-D514-K VSX-D514-K VSX-D514-S VSX-D514-S VSX-D514-S
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
MYXJI MYXJIFG MYXJI MYXJIFG MVXJI AC220-230V AC220-230V AC220-230V AC220-230V AC230V

Power Requirement

Remarks
For details, refer to "Important symbols for good services". PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936

PIONEER CORPORATION 2004

T ZZV APR. 2004 printed in Japan

SAFETY INFORMATION

This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so and refer the repair to a qualified service technician.
WARNING This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to cause cancer, birth defects or other reproductive harm. Health & Safety Code Section 25249.6 Proposition 65
NOTICE (FOR CANADIAN MODEL ONLY) Fuse symbols (fast operating fuse) and/or (slow operating fuse) on PCB indicate that replacement parts must be of identical designation. REMARQUE (POUR MODLE CANADIEN SEULEMENT)

Les symboles de fusible

(fusible de type rapide) et/ou
(fusible de type lent) sur CCI indiquent que
les pices de remplacement doivent avoir la mme dsignation.
(FOR USA MODEL ONLY) 1. SAFETY PRECAUTIONS
The following check should be perfor med for the continued protection of the customer and ser vice technician.

LEAKAGE CURRENT CHECK

Measure leakage current to a known ear th ground (water pipe, conduit, etc.) by connecting a leakage current tester such as Simpson Model 229-2 or equivalent between the ear th ground and all exposed metal par ts of the appliance (input/output terminals, screwheads, metal overlays, control shaft, etc.). Plug the AC line cord of the appliance directly into a 120V AC 60 Hz outlet and turn the AC power switch on. Any current measured must not exceed 0.5 mA.

ANY MEASUREMENTS NOT WITHIN THE LIMITS OUTLINED ABOVE ARE INDICATIVE OF A POTENTIAL SHOCK HAZARD AND MUST BE CORRECTED BEFORE RETURNING THE APPLIANCE TO THE CUSTOMER. 2. PRODUCT SAFETY NOTICE
Many electrical and mechanical parts in the appliance have special safety related character istics. These are often not evident from visual inspection nor the protection afforded by them necessarily can be obtained by using replacement components rated for voltage, wattage, etc. Replacement par ts which have these special safety character istics are identified in this Service Manual. Electr ical components having such features are identified by marking with a on the schematics and on the parts list in this Service Manual. The use of a substitute replacement component which does not have the same safety characteristics as the PIONEER recommended replacement one, shown in the parts list in this Service Manual, may create shock, fire, or other hazards. Product Safety is continuously under review and new instructions are issued from time to time. For the latest infor mation, always consult the current PIONEER Service Manual. A subscription to, or additional copies of, PIONEER Ser vice Manual may be obtained at a nominal charge from PIONEER.
Device under test Test all exposed metal surfaces

Leakage current tester

Reading should not be above 0.5 mA
Also test with plug reversed (Using AC adapter plug as required)

Earth ground

AC Leakage Test
[ Important symbols for good services ]
In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely. When you find the procedures bearing any of the symbols, be sure to fulfill them:

1. Product safety

You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual.

2. Adjustments

To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable. In accordance with the procedures or instructions described in this manual, adjustments should be performed.

3. Cleaning

For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning, proper cleaning should be performed to restore their performances.
4. Shipping mode and shipping screws
To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or the shipping screws should be installed before shipping out in accordance with this manual, if necessary.
5. Lubricants, glues, and replacement parts
Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed ones should be used.

CONTENTS

SAFETY INFORMATION..... 2 1. SPECIFICATIONS..... 5 2. EXPLODED VIEWS AND PARTS LIST... 8 2.1 PACKING..... 8 2.2 EXTERIOR SECTION.... 10 2.3 FRONT PANEL SECTION.... 12 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM... 14 3.1 BLOCK DIAGRAM..... 14 3.2 OVERALL WIRING CONNECTION DIAGRAM... 16 3.3 MAIN ASSY (1/3)..... 18 3.4 MAIN ASSY (2/3)..... 20 3.5 MAIN ASSY (3/3)..... 22 3.6 DSP ASSY (1/2)..... 24 3.7 DSP ASSY (2/2)..... 26 3.8 AMP & PRIMARY (1/2), TRANS2 and TRANS3 ASSYS... 28 3.9 AMP & PRIMARY (2/2), REGULATOR, AMP INPUT and TRANS1 ASSYS.. 30 3.10 VIDEO and 5.1CH ASSYS.... 32 3.11 FRONT DISPLAY, R. ENCODER, P. SW&FUNC KEY and F. KEY ASSYS.. 34 3.12 H.P. ASSY..... 36 4. PCB CONNECTION DIAGRAM.... 37 4.1 TRANS2, TRANS3 and TRANS1 ASSYS... 38 4.2 REGULATOR ASSY.... 39 4.3 MAIN ASSY..... 40 4.4 DSP ASSY..... 44 4.5 AMP & PRIMARY and AMP INPUT ASSYS.... 46 4.6 F. DISPLAY, R. ENCODER, P. SW & FUNC KEY, H. P. and F. KEY ASSYS.. 48 4.7 VIDEO and 5.1CH ASSYS.... 52 5. PCB PARTS LIST.... 54 6. ADJUSTMENT..... 58 7. GENERAL INFORMATION..... 59 7.1 DIAGNOSIS..... 59 7.1.1 POWER ON AND OFF INITIAL TIMING CHART... 59 7.1.2 IC DATA TRANSMISSION TIMING CHART.... 61 7.1.3 DETECTION CIRCUIT..... 62 7.1.4 AMPLIFIER SYSTEM PROTECTION OPERATION SPECIFICATION... 63 7.1.5 AMPLIFIER FAILURE DIAGNOSIS FLOW CHART... 65 7.1.6 DISASSEMBLY..... 66 7.2 PARTS..... 68 7.2.1 IC..... 68 7.2.2 DISPLAY..... 77 8. PANEL FACILITIES..... 79

1. SPECIFICATIONS

Amplifier Section
Continuous Power Output (Stereo RMS) Front... 80 W (1 kHz, THD 1.0 %, 8 ) Continuous Power Output (Surround RMS) Front.. 80 W per channel (1kHz, THD 1.0 %, 8 ) Center. 80 W (1kHz, THD 1.0 %, 8 ) Surround.. 80 W per channel (1kHz, THD 1.0 %, 8 ) Above specifications are applicable when the power supply is 230V. Input (Sensitivity/Impedance) CD, DVR/VCR, CD-R/TAPE/MD, DVD/LD, TV/SAT.. 200 mV/47 k Frequency Response CD, DVR/VCR, CD-R/TAPE /MD, DVD/LD, +0 TV/SAT.. 5 Hz to 100,000 Hz 3 dB Output (Level/Impedance) DVR/VCR REC, CD-R/TAPE/MD REC..200 mV/2.2 k Tone Control BASS.. 6 dB (100 Hz) TREBLE.. 6 dB (10 kHz) LOUDNESS. +6.5 dB/+3 dB (100 Hz/10 kHz) (at volume level50 dB) Signal-to-Noise Ratio [DIN (Continuous rated power output/50 mW)] CD, DVR/VCR, CD-R/TAPE/MD, DVD/LD, TV/SAT. 88/64 dB

Video Section

Input (Sensitivity/Impedance) DVR/VCR, DVD/LD, TV/SAT. 1 Vp-p/75 Output (Level/Impedance) DVR/VCR.. 1 Vp-p/75 Frequency Response DVR/VCR, DVD/LD, TV/SA ] MONITOR. 5 Hz to 7 MHz +03 dB T Signal-to-Noise Ratio.. 55 dB

FM Tuner Section

Frequency Range. 87.5 MHz to 108 MHz Usable Sensitivity. Mono:13.2 dBf, IHF (1.3 V/ 75 ) 50 dB Quieting Sensitivity.. Mono: 20.2 dB Stereo: 38.6 dBf Signal-to-Noise Ratio. Mono: 73 dB (at 85 dBf) Stereo: 70 dB (at 85 dBf) Signal-to-Noise Ratio (DIN). Mono: 62 dB Stereo: 58 dB Distortion.. Stereo: 0.5 % (1 kHz) Alternate Channel Selectivity.. 60 dB (400 kHz) Stereo Separation.. 40 dB (1 kHz) Frequency Response. 30 Hz to 15 kHz (1 dB) Antenna Input (DIN). 75 unbalanced

AM T uner Section

Frequency Range. 531 kHz to 1,602 kHz Sensitivity (IHF Loop antenna). 350 V/m , Signal-to-Noise Ratio.. 50 dB Antenna.. Loop antenna

Miscellaneous

Power Requirements UK model.. AC 230 V, 50/60 Hz European model. AC 220-230 V, 50/60 Hz Power Consumption.. 220 W In Standby... 0.5 W Dimensions. 420 (W) x 158 (H) x 393 (D) mm Weight (without package).. 9.3 kg Furnished Parts AM loop antenna.. FM wire antenna.. Dry cell batteries (AA size IEC R6). Remote control... Operating instructions..
Specifications and the design are subject to possible modifications without notice, due to improvements.

Accessories

RECEIVER SLEEP FL DIMMER INPUT ATT
INPUT SELECTOR DVD/LD DVD 5.1CH TV/SAT DVR/VCR
ADVANCED MIDNIGHT/ STANDARD SURROUND STEREO LOUDNESS

TOP MENU

RECEIVER

VOLUME

CH SELECT

TEST TONE

LEVEL EFFECT CLASS TUNER

TUNING STATION DISPLAY

SUB TITLE

DVD CONTROL

AM loop antenna (ATB7013)
FM wire antenna (ADH7030)
AA size IEC R6 Dry cell batteries (x2)
Remote control unit (XXD3067)
2. EXPLODED VIEWS AND PARTS LIST

NOTES:

Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List. The mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. Screws adjacent to mark on product are used for disassembly. For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions, apply as you think it appropriate.)

2.1 PACKING

PACKING parts List
Mark No. 1 NSP NSP Description FM wire antenna Warranty Card AM loop antenna Dry cell batteries (AA/R6) Operating instructions (English, Italian) Operating instructions (Dutch, Spanish) Operating instructions Part No. ADH7030 ARY7065 ATB7013 VEM1031 See Contrast table(2) Mark No. NSP 14 NSP 15 Description (French, German) Remote Control Unit Battery Cover Literature Bag Packing Sheet Left Pad V1 Right Pad V1 Packing Case Accessory Board Part No. XXD3067 XZN3139 AHG1180 AHG7069 XHA3141 XHA3142 See Contrast table(2) XHB3008

R5014 47K CH C5013 27p C5015 100/10 TS

D.GND MODE TEST

Q5004 2SA1037K(QRS)-TLB L5001 LFEA2R2J-T

ASS7004- -T

4.332MHz

CH C5014

TO FM/AM TUNER UNIT

RDS CK

470 470

R5001 R5002 R5003 R5004

DTC143EK-TLB B Q5003

C 10 9

C5016 1000p GNDU

52044-1145

GNDCH VT+12 Q5002 STBY

IC5001 BU1924F-TBB

RDS DATA QUALITY COMP.IN A.GND

D5007 UDZS10B

100/16 C5007

C5012 STBY

R5006 100

TO VIDEO ASSY

VIDEO1

52044-1345

VIDEO11 VIDEO3 AMUTE SWDET
V1 V2 V3 SWDET SROUT SRIN RMC FUR 4053A 4053INH
R9040 BOARD_DET/6_OHM V+5U
RMC FUR 4053A 4053 INH SRRXD SRTXD

D9012 1SS355 R9035

V5R6 D9001 D9002 1SS355 1SS355

AC_WP 1W_WP

6_OHM NECK
Q9008 DTA143TK 1SS355 D9003 SM+5V 1SS355 D9004 1SS355 D9005
PREG OLDT DCDT A MUTE V-12 V+12 YB YB C116 C115
0.01 0.01 D102 D101 RB501V-40 R9036 4.7 R9008 1K

SPB_RY

SPA_RY

L5002 QTL1013

L9001 ATL7002

ATL7002

R/C_RY

FL AC2

FL AC1

SP-B RY

SP-A RY

R/C RY

HP. SW

ST5.6V

D+5.6V

A 3/3 A

Unit: p-pF or F unless otherwise noted. Ratings: Capacity(F)/Voltage(V) unless otherwise noted. Rated Voltage: 50V expect for electrolytic capacitors.
TO REGULATOR ASSY (FOR FRONT CONTROL)

KP200TA20L

C9001 STBY

SROUT SRIN

RDS_CLK

RDS_DT

R5016 Q5009 STBY 2SC2412K (QRS)-TLB

TO TUNER ASSY

RSD_ON_/_OFF

FM COMP 2 GNDT

R5009 B

0.01 C5008

C5017 560p

TS 1K 4700p STBY

C5020 STBY C5009
TUNER CE 11 TUNER DI 10 TUNER CLK 9 TUNER DO GNDT TL 6 +9V 5 TR VSM

T_CE T_DI T_CLK T_DO

C5010 C E STBY E R5012 1K B R5011 C C5018 STBY

R5008 390

C5011 2.2/50

SC OUT

Q5001 2SD1664 (PQR)-TRB
C9002 STBY R9033 C9003 R9001 100K ACH0.47pF C9004 0.6 C9005 2.2/50 B 7 Q9001 R9002 47K C E
C9011 0.047/16 R9006 10K D9006 1SS355 V+5U D9007 1SS355 C9014 0.047/16 R9007 47K L9003 LFEA2R2J-T

SWPR 8

FLAC 2 FLAC 1 -VF DISP RST DISP CLK DISP DI

9 GNDU

DTC143EK-TLB R9062 470

K CN401

stby R9004
* D9009 1SS355 D9008 1SS355 D9010 1SS355 R9013 R9014 R9015 R9016 R9017 R470 R9037 C9006 100K 1u/10
GAV XSS3004- STBY X9001 STBY 15.7MHZ R9003 100K R9041 100K R9038 STBY R9010 5.1k GNDU CC9010 R9005 Cp

R8228 0

stby C8207
47/6.3 C8210 X8201 XSS3003 24.576MHz CH 10p

C8201 470p

JA8102
IC8101 (1/6) TC74HCU04AF R8111

IC8101 (2/6) TC74HCU04AF

100/16
47k IC8101 (6/6) TC74HCU04AF C2 1
V52 IC8101(5/6) TC74HCU04AF 3

100 R8105

QTL1013 L8103

L8201 QTL1013

VCOM RX2 RX1 AVSS RX0

CN8017

OPT INV+5D GNDD

0 C8221 stby RC8222 stby

Not used
FRONT OPT GNDD GNDD OPT IN3 (R6:NC) GNDD GNDD OPT OUT
R8113 R8114 100k R8115 100k GNDD

R8222 stby

R8221 stby

100 LRCK R8215

100 C8211

R8223 0

VKN1414

R8213 47

V32 L8205 stby R8219 C8216 stby
L8204 L8203 QTL1013 CH470p C8215 YB 0.1 C8225 47/6.3 QTL1013 C8212

(AWX8418)

RR8339 0

R8334 0

B 1/2 DSP ASSY

CH470p C8213

R8338 0

CH 10p

DVSS MCKO1

R8220 0

RX4 AVSS 3 RXAVSS 5 RXAVSS 7 RXIIC 9 P/SN 10 XTLXTLVIN

INTCSN 35

RRRRR8210 stby

IC8201 AK4114VQ

DIR&DIT

R8204 CDTO 32 PDN 31 0

XTI 30 XTO 29

CCLK 34 CDTI 33

R8225 DAUX 28 L8202 MCKO47 R8209 stby BICK 25 R8216 SDTO 24

R8340 0

100k R8320 100k

B 1/2 A

R8321 100k

V5A L8401

C8404 CH

470p C8405

0.01 C8406

MCLK DRCS CLK DATA

R8401 R8402 RR100 C8401 stby C8402 stby C8403 stby

C8407 YB 0.1

CN8007

CH CH CH CH CH 5

C8408 47/6.3

DAN202K

DZF2/OVF

AKP7073

I2C SMUTE BICK LRCK SDTI1 SDTI2 SDTI3 SDTO TVDD DZFE DAUX DFS
2 D8402 DAP202K 3 C8409 470p C8410 470p CH C8416 470p CH C8417 470p CH C8001 stby C8002 stby R8009 stby 19
NC(TST) ROUT1 LOUT1 ROUT2 LOUT2 ROUT4 LOUT4 CAD1 CAD0

or AK4628VQ 8ch CODEC

DVDD DVSS PDN TST
R8408 R8409 R8410 R8411 R8414 RRR8416 100

0.01 C8419 CH

100/16 C8420 YB
LOCK DRCS CLK DATA DRDO DRRT

C8414 470p

R8415 470p C8415 C8421 CH 4.7 100p

R8017 0

C8411 470p 100 C470p 100 C8413 470p

BCKO LCKO FDTO SDTO CDTO

IC8401 AK4529VQ

RIN LIN NC

RIN GNDA(DAG) LIN GNDA(DAG) FRO VCOMG FLO RECMUTE SRO GNDA(DAG) SLO GNDA(DAG) SWO GNDA(DAG) CO GNDA(DAG) SBRO GNDA(DAG) SBLO

R8016 0

C8006 stby R8002 R8003 ATL7002 R8004 ATL7002 R8005 stby LL8003 stby L8004 V5DL8005 RR8011 R8019 RR8015 stby RRC8903 stby GNDD
IC8902 NJU7223DL1-18 IN 2 0.YB OUT 1

R8012 0

C8904 100/16

12 GVCM V5D1

V5D1 IC8901 C8004 stby NJM2391DL1-33 IN OUT 2

R624 22k

C614 C606 4.7/50 KN601

VNF1084

R602 2.2k
(FR) IC601 : POWER AMP (2ch POWER PACK)

AEK7009

TP+ TP-

R618 (1A) GND 330

Q606 O.L. 2SC2240 D604 1SS133

G CN253

R631 (FL) 2.2k R634 R632 4.7k R633 1000P C631 4.7k
R639 R640 R641 1.8k 820 330

1SS133

C633 C637 4.7/100p

IC602 (1/3) PAC11A

R638 0.22 ACN7094

Q631 2SC5974A

R636 27k C634 C635 6.8p 6.8p

Q633 2SC2240

Q632 2SC5974A
R642 D633 MTZJ8.2A R643 6.8k R644 D634 MTZJ8.2A 6.8k

R645 33k

R651(SL) 2.2k
IC602: POWER AMP (3ch POWER PACK)
C655 C663 100p 4.7/50 RQ651 2SC5974A

R667 R671 1.8k

D653 1SS133 Q655 2SC2240 R673 22k
R653 4.7k R655 1000P C651 4.7k

C665 NP

Q653 2SC5974A

IC602(3/3) PAC11A

0.22 ACN7094
R661 27k C657 C659 6.8p 6.8p 1000P C691 10k
R656 4.7k R654 4.7k R652 2.2k

Q652 2SC5974A R658 430

6.8p 6.8p R662 27k 21
R674 IC602(2/3) PAC11A 22k 1SS133 D652 C666 2.2/50 NP

R666 0.22 ACN7094

C656 4.7/50
1.RESISTORS Unit:k-k,M-M or unless otherwise noted. Rated power:1/4W unless otherwise noted. Tolerance:(J) 5% unless otherwise noted. 2.CAPACITORS Umit: p-pF or F unless otherwise noted. Ratings:Capacity(F)/Voltage(V) unless otherwise noted. Rated Voltage:50V except for electrolytic capacitors. 3.DIODES Indicated in 1SS133-T

R668 330

Q656 2SC2240

D654 1SS133

Q654 2SC5974A

C658 C660

2SC5511 Q701 R721 15k Q721 2SA1145 R723 47k IC701 ICP-N10 (400mA) 10/100 R703 C705 R708 150k

R701 6.8k 68k

J3 J4 J5 J6 J7 J8
MY,MV DB227NB0 DB925NB0 DB217NB0 DB917NB0 DB617NB0

R881 4.7 1/4W C882 NP

CAUTION : FOR CONTINUED PROTECTION AGAINST RISK OF FIRE. REPLACE ONLY WITH SAME TYPE NO. 49101.6 FOR IC853 MFD, BY LITTELFUSE INC.

Q722 2SC1845

15k R722

2SA1145 Q703

STANDBY

R882 C883

J8 47k C881 ACH1237 NP

10/100 R704 68k

4.7 1/4W NP

Q704 2SC1845

R707 150k

R705 47k

C852 R852
R702 6.8k C707 Q702 2SA2005 D701 ACG1005-A-T

POWER TRANSFORMER

STANDBY STANDBY
AEK7012 (1.6A) IC851 AEK7012 (1.6A) AEK7012 (1.6A)

C XCH3012 (3300uF/42V)

1000p YB 1000p YB R1504 STBY

S505 POWER S506

52151-0310(3P)

CD S507

S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 VF 60

KEYKEY3 5

S451 RSTEREO/ DIRECT S452 SIGNAL SELECT S453 MIDNIGHT/ LOUDNESS S454 SPEAKER IMPEDANCE S455 VSB MODE S456 TONE S457 QUICK SETUP
S458 ADVANCED SURROUND S459 STANDARD S460 TUNING + S461 TUNING S462 STATION + S463

S466 MUTE S467

CDR/TAPE R507 1.2k S508

R452 680

R468 680

FM 1.6k S509

52151-0710

R502 2.7k

S11 S12 S13 S14 S15 S16 S17 S18 S19 S20 S21 S22

51048-0700

S11 S12 S13 S14 S15 S16 S17 S18 S19 S20 S13

R453 820

R461 820

R469 820

R456 2.7k

R464 2.7k

IC401 PE5420A

Display U-com

VOL LED
A4 A3 A2 A1 AV4 AV3 AV1 AV2

7 ENTER 7

E ON MODE S468

S501 DVR/VCR S502

D20PYY0708E

S469 MPX

KEY IN VOLTAGE [V]

R454 1.2k

R470 1.2k

R462 1.2k

PTY SEARCH

R503 5.1k

TV/SAT S503 DVD5.1 S504 DVD/LD

4.2 3.6

R455 1.6k

R463 1.6k

R471 1.6k

R504 13k

R457 5.1k

STATION R465 5.1k S464

R458 13k

R466 13k

TUNER EDIT S465

100k R426

C415 C410 R425 100k R427 100k 0.01 YB C411 0.01 YB

C412 47/50 -TS

FRONT KEY ASSY S451 : STEREO/DIRECT S452 : SIGNAL SELECT S453 : MIDNIGHT/LOUDNESS S454 : SPEAKER IMPEDANCE S455 : VSB MODE S456 : TONE S457 : QUICK SETUP S458 : ADVANCED SURROUND S459 : STANDARD S460 : TUNING +

R1503 STBY

S461 : TUNING S462 : STATION + S463 : STATION S464 : TUNER EDIT S465 : CLASS S466 : MUTE S467 : E ON MODE S468 : PTY SERACH S476 : MPX

3.12 H.P. ASSY

R2W 330 2w R3 2

JA1551 RKB1014

C 1/2 CN702
HP L HP G HP R AMUTE HP SW GNDU

HEADPHONE

DREG DREG DREG DREG REG REG GND GND REG REG AC1 AC2 -VF W UP ACRY U+5V GNDU GNDU A RY +12V B RY

VLVL+ VH-

AMP&PRIMARY XWZ3783 XWZ3784 XWZ3785 XWZ3788

R758 CN753

W570 R755 00BPCA C760
HP L HP G HP R MUTE HP SW U GND

REAR Rch

TUBE SIDE

D57 R54

RED BLACK

5 W617 RY753

NEUTRAL

LIVE AC IN

C770 C758
4.6 F. DISPLAY, R. ENCODER, P. SW & FUNC KEY, H. P. and F. KEY ASSYS
3 F.A 2 GNDU 1 F.AV W259 3

I.C.T. F.C.

W254 W255 W260

CMKI-P3X

1 F.AV 2 GNDU 3 VDD 4 KEYKEYKEYENTER

(XNP3073-B)

S463 STATION -

S462 STATION +

S461 TUNING -

S460 TUNING +

S459 STANDARD

S458 ADVANCED SURROUND

S467 FL DIMMER/ EON MODE
W286 TUNER EDIT CLASS INPUT ATT/ PTY SEARCH MUTE 1 F.AV 2 GNDU 3 VDD 4 KEYKEYKEYENTER

FRONT KEY

XWZ3757

M P. SW &

FUNC. KEY ASSY

C CN702

O H.P ASSY

S503 DVD 5.1

S502 TV/SAT

S501 DVR/VCR

3 F.A 2 GNDU 1 F.AV

CDR/TAPE

POWER SW & FUNCTION KEY XWZ3762

S505 POWER

K M N O

JA1551

KN1551

XWZ3767

S504 DVD/LD

K FRONT DISPLAY ASSY

XNP3073-B

C412 W252 W266

S451 STEREO/ DIRECT
1551 R6 R1554 RGNDU 2 HP SW 3 AMUTE 4 HP R 5 HP GND 6 HP L

W268 V401 W252 W266 30

W275 W267 C442 1
6 ENTER 5 FENC A 4 FENC B 3 GNDU 2 ENC B 1 ENC A 6 6
17 FLACFLAC-VF 14 DISPRST 13 DISPCK 17 WDISPDI 11 DISPDO 10 DISPRDY 9 DISPEN 8 SRIN 7 SROUT 6 RMC 5 1WUP 4 D+5.6V 3 STBY+5.6V 2 GNDU 1 GNDU

W276 404

W253 W284
ICW272 W270 W273 X401 W251 W262 W263 W264 W269 W271

IC402 W287

FRONT DISPLAY

XWZ3754

S452 SIGNAL SELECT

S453 MIDNIGHT/ LOUDNESS

S454 SPEAKER IMPEDANCE

S455 VSB MODE

S456 TONE

S457 QUICK SETUP

N FRONT KEY ASSY
2 GNDU 3 VDD 4 KEYKEYKEYENTER

L R.ENCODER ASSY

1 VSSSISOSCKNC 6 RESET 7 VDD 8 VPP(IC) 9 NC
6 ENTER 5 FENC A 4 FENC B 3 GNDU 2 VENC B 1 VENC A

W291 W289

S511 ENTER

R.ENCODER

XWZ3765
11 DISPDO 17 FLACFLACDISPRDY 15 -VF 9 DISPEN 14 DISPRST 8 SRIN 13 DISPCK 7 SROUT 12 DISPDI QR414 R416 R417 R411 RGNDU 1 GNDU 6

R404 Q441 CRMC 5 1WUP 4 D+5.6V 3 STBY+5.6V R481 R482 D403 R402 R403 C422 D404 D405 Q484 R405 R406 C413 C C483 RC482

R413 R415 R430

6 ENTER 5 FENC A 4 FENC B 3 GNDU 2 ENC B 1 ENC A C418 C417
R483 R484 R485 R486 R487 R488 R489 R490 R407 R408
R492 R493 R494 R495 R496 R497 R498 R499 R500
R419 R420 RVSSSISOSCKNC 6 RESET 7 VDD 8 VPP(IC) 9 NC 9

R423 R422

R457 R456 R455 R454 R458 R453 QUICK SETUP TONE VSB MODE SPEAKER IMPEDANCE MIDNIGHT/ LOUDNESS SIGNAL SELECT R452 STEREO/ DIRECT
6 ENTER 5 FENC A 4 FENC B 3 GNDU 2 VENC B 1 VENC A 1

5 KEYKEYENTER

7 ENTER 6 KEY4
R494 R495 R496 R497 R498 R499 R500 R520 R521 R522 R523 R524 R525 R526 R527 R528 R529 R530 R531 R532
R485 R486 R487 R488 R489 R490

Q441 Q442 Q484 IC401

C419 C483 C482

R423 C416

7 ENTER 6 KEYKEYKEYVDD 2 GNDU 1 F.AV

(XNP3073-B) CN450

R452 R460 R464 R462 C452 C453 R467 STEREO/ DIRECT ADVANCED SURROUND C451 R451 STANDARD R461 TUNING + TUNING R463 STATION + STATION R465
R468 R466 R469 R470 R471 R1504

DVR/VCR 3

HP GND C1557 Q1552

3 F.A 2 GNDU 1 F.AV AM

C1552 R1556

C1556 C1558

FL DIMMER/ EON MODE

INPUT ATT/ PTY SEARCH

POWER SW & FUNCTION KEY

XWZ3762

2 HP SW 1 GNDU
6 HP L 5 HP GND 4 HP R 3 AMUTE

C1551 R1555

C1555 C1554 C1553
4.7 VIDEO and 5.1CH ASSYS

J 5.1CH ASSY

W202 W201 C324 C332
8 AG 7C 6 -12V 5 SW 4 12V 3 SL 2 AG 1 SR
JA352 W152 W137 W153 W176 JA351
CN304 JA305 CN308 jp050a C309 CN-12V 6 ADG 5 +12V 4 GNDU 3 SWOUT 2 GNDA 1 SBOUT W191 jp075a W190 jp075a W167 W168

A CN105

jp150a W138

I VIDEO ASSY

W139 W140 W169 jp150a

F CN803

R 31 3
1 TXD 2 RXD 3 4053INH 4 4053A 5 FURN. 6 RMC 7 SRIN 8 SROUT 9 SWDET 10 AMUTE 11 VV13 V1 1

jp250a

Q301 CN390

5 CH. IN

XWZ3759

C331 W196

W198 CN307

XWZ3749

1 CNWW141 W171 W172 W173 W142 W170 W175 W174

W203 CN302

ADG -5V
9 V+5.6V 8 ADG 7 V-5.6V 6 VVVFRONT V 2 4053A 1 4053INH

R321 C319 C318 C317 R331

8 C C320 R324

R334 R332

R336 R333 SW CG C322

8 R344 C328 5C326 5

4 R338
1 SR 2 AG 3 SL 4 12V 5 SW 6 -12V 7C 8 AG

5 CH IN

CMKI-P3X XWZ3759

R343 C327

C345 4

C316 R340 C325 C344

Resonator Resonator GND DISP RESET DISP CK DISP DTI DISP DTO DISP RDY NC NC NC NC DISP EN NC SR IN GND KEY IN4 KEY IN3 KEY IN2 KEY IN1 GND '+5V '+5V NC FEN A FEN B EN B EN A NC TEST NC NC NC 1W WUP VOL LED MCACC LED FUNC/AUX FUNC_TUNER
crystal connection for system clock oscillation crystal connection for system clock oscillation receive reset signal from main u-com clock signal from main u-com datain from main u-com data out to main u-com ready signal from main u-com
enable signal from main u-com remote control signal input from main room ground potential for A/D converter
analog power voltage input to A/D converter positive power supply to ports
output wakeup signal to main u-com LED Output LED Output LED Output LED Output
No. Port FIP37/P45 FIP36/P44 FIP35/P43 FIP34/P42 FIP33/P41 FIP32/P40 FIP31/P37 FIP30/P36 FIP29/P35 FIP28/P34 FIP27/P33 FIP26/P32 FIP25/P31 FIP24/P30 FIP23 FIP22 FIP21 FIP20 VDD2 VLOAD FIP19 FIP18 FIP17 FIP16 FIP15 FIP14 FIP13 FIP12 FIP11 FIP10 FIP9 FIP8 FIP7 FIP6 FIP5 FIP4 FIP3 FIP2 FIP1 FIP0 Pin Name FUNC_CDR FUNC_CD FUNC_DVD FUNC_TV FUNC_VCR FUNC_VIDEO S22 S21 S20 S19 S18 S17 S16 S15 S14 S13 S12 S11 '+5V VF S10 S9 S8 S7 S6 S5 S4 S3 S2 S1 G10 G9 G8 G7 G6 G5 G4 G3 G2 G1 I/O O O O O O O I/O I/O I/O I/O I/O I/O I/O I/O O O O O O O O O O O O O O O O O O O O O O O O O LED Output LED Output LED Output LED Output LED Output LED Output Display Display Display Display Display Display Display Display Display Display Display Display positive power supply to FIP controller. pull down resistor connection of FIP controller Display Display Display Display Display Display Display Display Display Display Display Display Display Display Display Display Display Display Display Display

E D C B

7 BD3841FS (MAIN ASSY : IC101)

9ch Function Switch

7 Block Diagram
RECC1 RECA1 RECC2 RECA2 RECB1 RECB2 DGND OUT1 VCC OUT2 BIAS VEE INI1
* F-SW1 : INPUT FUNCTION1 F-SW2 : INPUT FUNCTION2

Description of terminal

Terminal Number
Terminal Name INA1 INA2 INB1 INB2 INC1 INC2 IND1 IND2 INE1 INE2 INF1 INF2 ING1 ING2 INH1 INH2
Description A 1ch input terminal A 2ch input terminal B 1ch input terminal B 2ch input terminal C 1ch input terminal C 2ch input terminal D 1ch input terminal D 2ch input terminal E1ch input terminal E 2ch input terminal F 1ch input terminal F 2ch input terminal G1ch input terminal G2ch input terminal H 1ch input terminal H 2ch input terminal

GOUTFR Rch input gain output terminal
Lch volume Input terminal
7.2.2 DISPLAY 7 XAV3022 (FRONT ASSY : V401)
FL DISPLAY Pin Assignment 49 1
SIGNAL AUTO SB DIGITAL DIGITAL ANALOG DTS MPEG
DIGITAL VIR.SB DIRECT SLEEP PROLOGIC X MIDNIGHT STEREO ADV.SURR. MPEG LOUDNESS MONO

ATT EON TUNED RDS SP AB

Grid Assignment

Segment Designation

S1 a1 S2 S3 S4 a2 a

SIGNAL

b f m g b

e Dp2 d c

S1 (10G)

(2G to 9G)

Pin Connection

Pin No.

Connection F2 F2 NP NP P22 P21 P20 P19 P18 P17 P16 P15 P14 P13 P12 P11 P10 P9 P8 P7 P6 P5 P4 P3 P2 Pin No. 2 1
Connection P1 NX NX NX NX NX NX NX NX NX 10G 9G 8G 7G 6G 5G 4G 3G 2G 1G NP NP F1 F1 NOTE 1) F1, F2.. Filament 2) NP. No pin 3) NX. No extend pin 4) DL.. Datum Line 5) 1G to 10G.. Grid 6) Field of vision is a minimum of 21.8 from the lower side.
Anode Connection 10G S1 P1 AUTO P2 SB P3 DIGITAL P4 ANALOG P5 DIGITAL (L) P6 DTS P7 MPEG (L) P8 P9 MPEG (R) P10 DIGITAL (R) P11 PRO LOGIC P12 Neo:6 P13 VIR.SB P14 ADV.SURR. P15 X P16 DIRECT P17 MIDNIGHT P18 LOUDNESS P19 P20 SLEEP STEREO P21 P22 MONO
a1 a2 h j k b f m g c e r p n d1 d2 Dp2 Dp1 S1 S4 S2 S3
ATT EON TUNED RDS S1 A B 1a 1b 1f 1g 1c 1e 1d

2a 2b 2f 2g

2c 2e 2d

8. PANEL FACILITIES

Front Panel

AUDIO/VIDEO

MULTI-CHANNEL

PTY SEARCH EON MODE

1 ST ANDBY/ON Switches the receiver between on and standby. 2 INPUT SELECT buttons Use to select the input source. 3 STATION (+/) buttons Selects station presets when using the tuner. 4 TUNING (+/) buttons Selects the frequency when using the tuner. 5 Remote sensor Receives the signals from the remote control. 6 ENTER 14
MUTE Use to mute the sound or restore the sound if it has been muted. LISTENING MODE buttons STANDARD Press for Standard decoding and to switch between the various Pro Logic II options. ADVANCED SURROUND Use to switch between the various surround modes. STEREO/DIRECT Switches direct playback on or off Direct. playback bypasses the tone controls and channel levels for the most accurate reproduction of a source.
7 MULTI JOG dial The MULTI JOG dial performs a number of tasks. Use it to select options after pressing TONE,QUICK SETUP or TUNER EDIT. 8 PHONES jack Use to connect headphones. 9 TUNER EDIT Press to memorize and name a station for recall. 10 CLASS Switches between the three banks (classes) of station presets. 11 MPX Press the MPX button to receive a radio broadcast in mono. 12 PTY SEARCH Use to search for different program types in RDS mode. 13 EON MODE Use to search for different programs that are transmitting traffic or news information (this search method is called EON).

 

Tags

- 09 2-1880 CDX-GT300 309008X51 3 0 329 16 STR-DA50ES M-CR603 KAC-723 SA-VE345 Tvxl105-115 PRE 2 KX-TCD755 Portege M800 Travelmate 3010 CDE-9871R Photosmart 8450 CE107B-S PCG-Z1M RP-42PX11H DL3850 AG91850-4I 2 0 Urc-4080 X1230 LC-19A1E TX-SV525 NN-8507 990 IS Vm SE PDK-50HW2A Casio 4334 GSA-5169D Omni-848 FS-1503 Aficio 615C ASD-51N TTM57 PL-Z92 SP-404 Canon S600 Canon XL1 Series NV-GS75GN VL-tone Vl-1 ZDF2020 Nokia 3210 A300D CD-300 Sp-GPS-22a0933 Encoder MRV-F405 LH-D6245A XM444W 5000P Review Fus 32 CD-GT1 Dry Bf8 DVX162 Laserjet 3550 Electramacel1750-14 MVX2I HF3480 DEH-P6900IB Revolution SLV3220-00 Pctv 400I LF-U850A Hoist Saab 9-3X EM-120 BHD-301-D CF-21F80K FX 600 C4080I PCG-K23 DAB 53 VN-3200PC 3M X66 CT470 MHC-3500 Motopure H12 DSC-T11 RY41002 VRX610 DTH5000 MY600X Speed ML-2240 XEU Finisher PMP518M UE-55C6700 OT-710 Gpsmap 640 PB-G11 KDL-20G2000 CDX-L360 F1245 BR-6204WG Veriton T661

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101