Product Specification of WAP-4000A
Networking & Communication

Product Specification

54/108Mbps Wireless Access Point WAP-4000A Version 1.0
This document contains confidential proprietary information and is property of PLANET. The contents of this document should not be disclosed to unauthorized persons without the written consent of PLANET.
Change History: Revision Version 1.0 Date 2006/10/12 Author John Sung Change List Initial release

Author Reviewed by:

John Sung Tom Shih

Editor: Approved by:

Confidential

1. PRODUCT DESCRIPTION

The WAP-4000A is an IEEE 802.11g Wireless Access Point. IEEE 802.11g uses 2.4GHz frequency band, the same as IEEE 802.11b, but it provides more throughput rate than 802.11b. The maximum throughput rate of 802.11g can be up to 54Mbps. The WAP-4000A is also backward compatible and interoperable with compliant IEEE 802.11b wireless devices. Except 64/128bit WEP encryption, the WAP-4000A also integrates 802.1x authentication. Cooperating with a RADIUS server can make your wireless LAN more secure then ever. Provided with one reversed-polarity SMA male connector, the WAP-4000A is easy to connect external antenna and booster to extend the wireless distance. Four operational modes including AP, AP Client, Point to Point Bridge and Point to Multipoint Bridge widen the usage of WAP-4000A. Being a standard Wireless AP, WAP-4000A, together with any other wireless access points provides the seamless integration between Ethernet network and Wireless network and it also offers the roaming for all the Wireless mobile devices. AP client mode turns Ethernet devices into a wireless client. As switching to wireless for bridging operation mode, having two or more LANs in different buildings connected is no more need to through physical and costly wires. The WAP-4000A quickly installed in these buildings provides 54Mbps transfer rate 24/7 without any additional cost. Because of Cost effective in LAN-to-LAN and LAN-to-Multi-LAN connection, WAP-4000A would be the best choice of network extension.

2. PRODUCT FEATURES

Compliance with Wireless LAN IEEE 802.11g and IEEE 802.11b Strong network security with 802.1X authentication and 64/128-bit WEP encryption. One detachable reversed-polarity SMA connectors can connect to external antenna for expanding connection distance High speed data transfer rate up to 108Mbps Four operation modes selectable: AP / AP Client / Point to Point / Point to Multipoint Auto Fall-Back Data Rate for Long-Distance Communication and Noisy Environments Features Roaming, Best Access Point Selection, Load Balancing, and Network Traffic Filtering Supports 63 clients to connect the network. (For best performance, the suggested maximum number of clients to one WAP-4000A in AP mode is 25.) Provides Windows-based configuration utility and Web Configuration Supports DHCP Server and Client Supports MAC Filter

Filename: PS-WAP4000A

Page 2 of 5

Printed on 9/27/2007

PRODUCT SPECIFICATION
3.1 MAIN COMPONENT Single Chip 2.4GHz AP Solution: RAM: LAN Chip: 3.2 Functional Specifications Atheros AR2316A Mira P2V64S40ETP (64M bits) IC+ IP101A
Standard Signal Type Modulation Port Antenna Antenna Connector Output Power

Sensitivity

Operating Mode Security

Channel Data Rate

IEEE 802.11b, IEEE 802.11g DSSS (Direct Sequence Spread Spectrum) BPSK / QPSK / CCK / OFDM 10/100Base-TX (RJ-45) * 1 Detachable Dipole Antenna * 1 Reversed Polarity SMA Male 17dBm (max.) 11 Mbps (CCK): -82dBm 5.5 Mbps (QPSK): - 86dBm 802.11b 1, 2 Mbps (BPSK): - 90dBm (typically @PER < 8% packet size 1024 and @25C + 5C) 54 Mbps: -72dBm 48 Mbps: - 72dBm 36 Mbps: -76dBm 24 Mbps: -79dBm 802.11g 18 Mbps: -82dBm 12 Mbps: -86dBm 9 Mbps: -89dBm 6 Mbps: -90dBm (typically @PER < 8% packet size 1024 and @25C + 5C) AP, AP Client, Bridge: Point to Point, Point to MultiPoint 64/128-bit WEP encryption Password Protect 802.1X security (MD5 and TLS) MAC Filtering SSID Broadcast Disable function FCC: 11 Channels (US, Canada) ETSI: 13 Channels (Europe) TELEC: 14 Channels (Japan) 802.11g: Up to 108Mbps (6/9/12/18/24/36/48/54/108) 802.11b: Up to 11Mbps (1/2/5.5/11)
3.3 Physical Specification Dimensions
150 x 115 x 35 mm (W x D x H)
Weight: 215g (Net Weight)

Page 3 of 5

Front Panel:

Back Panel:

LED and button definition LED PWR Color Green Function Off: Power is not connected On: Device is ready Blink: During boot up procedure Off: LAN is not connected On: LAN is connected Blink: Transmitting or receiving data through the LAN Off: Wireless LAN is no function Blink: Transmitting or receiving data through the Wireless LAN

Reset Button Time Press less than 5 Sec. Press more than 5 Sec. Active Access Point will re-boot itself, keeping your original configurations Access Point will reset itself to the factory default settings
3.4 Environment Specification Operating Temperature: 0 ~ 55C
Relative Humidity: 10 ~ 90%(non-condensing) Storage Temperature: -20 ~ 70C
Relative Humidity: 10 ~ 90%(non-condensing) 3.5 Input power 7.5V DC, 1A

Page 4 of 5

3.6 Regulatory Compliance

FCC Class B, CE

3.7 BASIC PACKAGING
1 x WAP-4000A 1 x Quick Installation Guide 1 x User's manual CD 1 x Dipole Antenna 1 x Power Adapter
3.8 PACKAGING INFORMATION Dimension 255 x 207 x 65 mm (W x D x H) Weight 668 g (gross weight)

Page 5 of 5