Plantronics Explorer 200 Series

User Guide

Welcome
Congratulations on purchasing a Plantronics headset. This User Guide contains instructions for setting up and using your Plantronics Explorer 200 series headset. Please refer to the separate For Your Safety booklet for important product safety information prior to installation or use of the product.

Getting Assistance

The Plantronics Technical Assistance Centre is ready to assist you. You can nd answers to frequently asked questions, ask a question using e-mail, receive service over the Internet, or speak directly with a representative. Visit www.plantronics.com/support or call your country support line mentioned at the back of this user guide.

Registering Your Product

Visit www.plantronics.com/productregistration to register your product online so we can provide you with the best service and technical support.

Contents

Welcome....ii What is Bluetooth?...iv Package Contents, Features and Accessories.. 1 Charging Your Headset.. 2 How to Charge Your Headset Using the AC Charger. 2 Pairing Your Headset... 3 Plantronics QuickPair Technology.. 3 How to Pair Your Phone With Your Headset for the First Time.. 4 How to Pair Your Headset if it Has Been Previously Paired With Another Device... 5 Adjusting the Fit... 6 Headset Controls... 7 Range... 8 Indicator Lights... 9 Hands-Free Features... 10 Troubleshooting... 11 Product Specications... 12

What is Bluetooth?

Bluetooth wireless technology provides a way for devices to communicate with each other using short-range radio frequency instead of wires. Any two Bluetooth devices can communicate as long as they both have Bluetooth turned on, they are within range and they have been paired a quick handshake process that connects the two devices. Bluetooth range is up to 10 metres (33 feet). Obstructions such as walls or other electronics devices can cause interference or shorten the effective range. NOTE For optimal performance, place your headset and phone on the same side of your body.
Package Contents and Features
Headset Front Call Control Button (on/off) Indicator Light Volume Control Earloop

Headset Back Microphone

Speaker / Eartip Charging Jack AC Charger 100 240V
Plantronics Explorer 200 Series Accessories*
Vehicle Charging Adapter #76777-01
USB Headset Charger #76016-01
Vehicle Power Charger #78583-01
* Not included. To order, please contact your Plantronics supplier or go to www.plantronics.com 1

Charging Your Headset

How to Charge Your Headset Using the AC Charger Before using your headset for the rst time, charge it for at least 20 minutes. A full charge takes approximately two hours.
Connect the AC charger to a power outlet. Plug the AC jack into the charging jack on the headset.
While your headset is charging, the indicator glows red. When your headset is fully charged, the indicator turns off. WARNING Do not use your headset while it is connected to the charger. CHARGING TIME 2 hours.

Full charge

20 minutes.
Minimum charge before rst use

Pairing Your Headset

Pairing is the process of introducing your headset to your phone. Before using your headset for the rst time, you must pair it with your Bluetooth phone. Normally, you need to pair your headset with your phone only once. To see a demo of the pairing process, visit www.plantronics.com/ EasyToPair (only available in English). Plantronics QuickPair Technology Your new headset includes Plantronics QuickPair technology to simplify the Bluetooth setup process. The rst time you turn your headset on, your headset automatically enters pairing mode for 10 minutes (the indicator light ashes red and blue). Once paired successfully, your headset stays on for instant use. If not sucessfully paired after 10 minutes, your headset automatically powers off. When you turn the headset on again, it automatically goes into pairing mode until successfully paired with a Bluetooth phone.

Pairing Your HeadsetFirst Time
SETTINGS Time and Date Phone Settings

Bluetooth

Sound Settings Network Services Security Reset Settings

BLUETOOTH

Discover/ Search

PASSKEY

How to Pair Your Phone With Your Headset for the First Time
Turn on the Bluetooth feature on your phone. For most phones, select Settings/Tools > Connections > Bluetooth > On. See your phones user guide for more information. Turn the headset on. Press and hold the call control button until the indicator light continues to ash red and blue. The headset is now in pairing mode. If you dont see the red/blue ash, press and hold the call control button to turn your headset off, and then press and hold the call control button again until you see the red/blue ash.
Use the commands on your phone to locate your headset. For most phones, select Settings/Tools > Connections > Bluetooth > Search > 2XXPlantronics. See your phones user guide for more information. When prompted for the passkey, enter 0000. Pairing is successful when the indicator on your headset ashes blue. Your headset is now connected and ready to use.
How to Pair Your Headset if it Has Been Previously Paired With Another Device
Turn the headset off. Press and hold the call control button until the indicator turns red and then turns off. Turn the headset on. Press and hold the call control button until the indicator light continues to ash red and blue. The headset is now in pairing mode. Use the commands on your phone to locate your headset. For most phones, select Settings/Tools > Connections > Bluetooth > Search > 2XXPlantronics. See your phones user guide for more information. When prompted for the passkey, enter 0000. Pairing is successful when the indicator on your headset ashes blue. Your headset is now connected and ready to use.

Adjusting the Fit

To remove the earloop, gently pull up on earloop near the Plantronics name until you hear a snap. To replace, gently snap back onto post. Position earloop as shown above. Place the earloop behind your ear. Rotate the headset so that the speaker/eartip rests comfortably in your ear. Align the microphone with the corner of your mouth. Callers can hear you best when you point the microphone towards the corner of your mouth.

Headset Controls

Turn on the headset Press and hold the call control button until the indicator glows blue. You will hear ascending tones. Turn off the headset Press and hold the call control button until the indicator glows red. You will hear descending tones. When power is off, indicator stays off. Answer a call Briey press the call control button. When you receive a call, your phone may ring before your headset rings. Wait until you hear the ring in your headset before you press the call control button to answer the call. Reject a call Make a call Press the call control button for 2 seconds. Enter number on your phone, press send, and the call is automatically transferred to headset; no need to press call control button. Briey press volume button to increase volume. At upper limit you will hear two tones. Press again for lowest volume level. There are ve volume levels. WARNING Do not use headphones/headsets at high volumes for an extended period of time. Doing so can cause hearing loss. Always listen at moderate levels. See www.plantronics.com/ healthandsafety for more information on headsets and hearing.

Adjust the volume

Transfer a call from headset to phone Transfer a call from phone to headset While in a call, press and hold the call control button until you hear a tone. While in a call, press and hold the call control button until you hear a tone.
To maintain a connection, keep your headset within 10 metres (33 feet) of the Bluetooth device. If there are obstacles between your headset and the device, you may experience interference. For optimal performance, place your headset and phone on the same side of your body. Audio quality degrades as you move out of range. When you are far enough away to lose the connection, you hear a high tone in the headset.
NOTE The headset attempts to reconnect after 30 seconds. If you move back in range, you can manually reconnect by pressing the call control button. NOTE Audio quality is also dependent upon the device with which the headset is paired.

Indicator Lights

Headset Status Powering on Powering off Standby Charging battery Low battery Pairing mode Missed call Incoming call Headset Indicator Light Steady blue, then intermittent ashes (changes to standby mode) Red appears and goes off Blue intermittent ashes Red solid light. Light indicator turns off when battery is fully charged and headset is off. Triple red ashes Blue/red alternating ashes Purple ashes. Press the call control button to cancel ashing light. Triple blue ashes when ringing.

Hands-Free Features

If your phone and your wireless service provider both support hands-free operation, you can use the following features: Redial the last number To activate last number redial, double press the call control button. You will hear a double tone after each double-button press. With the headset on, press the call control button for 2 seconds to activate the voice dialling. NOTE To use voice-activated dialling, the voice-dialling feature must be enabled on your phone. See your Bluetooth phone manual for instructions. Reject a call When receiving an incoming call, press the call control button for 2 seconds to reject the call.

Using Voice Dialling

Troubleshooting
My headset does not work with my phone. Headset was not in pairing mode when mobile phone menu selections were made. See page 5 Pairing Your Headset. Incorrect menu selections were made on your mobile phone. See page 5 Pairing Your Headset. I did not enter my passkey. Your phone did not locate the headset. Repeat the pairing process on page 5. Incorrect menu selections were made on your mobile phone. Repeat the pairing process on page 5. Callers cannot hear me, or I cannot hear caller/dialling tone. The headset is not turned on or the headset is not connected to mobile phone. Press the call control button for 2 seconds until you hear a beep or see the indicator light glow blue to turn headset on. Your headset is out of range. Move the headset closer to the phone or Bluetooth device. Your headset battery is drained. Charge your battery using the AC power adapter supplied. The listening volume is too low. Press the volume key up (toward the earloop) to increase the sound heard in the headset.

Product Specications

Talk Time* Standby Time* Charge Time Range Power Requirements Battery Type Storage/Usage Temperature Version Up to 8 hours Approximately 9 days or 218 hours 2 hours Up to Bluetooth standard 10 metres (33 feet) 5V DC 180 mA Lithium ion polymer 50 F 104 F (10 C 40 C) Bluetooth 2.0
Supports Bluetooth hands-free and headset proles. * Battery enabled. Performance may vary by device.
For safety information, see the separate For Your Safety booklet. For warranty information, see the separate 2 Year Warranty leaet or visit www.plantronics.com
Plantronics Ltd Wootton Bassett, UK Tel: 0800 410014

Finland Tel: 0800 117095

Plantronics B.V. Hoofddorp, Nederland Tel: (0)0800 Plantronics (NL) (BE/LUX)
Plantronics Sarl Noisy-le-Grand France
Middle East Region : www.plantronics.com

Norge Tel: 80011336

Czech Republic www.plantronics.com
Plantronics BV Regus House Harcourt Centre Harcourt Road Dublin 2 Ireland Office: +353 (0) 3919 Service ROI: 896
Aby uzyska wicej informacji: www.plantronics.com

Danmark Tel: 05 35

Portugal Tel: 45 17
Plantronics GmbH Hrth, Deutschland Kundenservice: Deutschland 400 sterreich 500 Schweiz 340
he : , www.plantronics.com hu
Tovbbi informcik: www.plantronics.com
Pentru informaii www.plantronics.com

: www.plantronics.com

Plantronics Acoustics Italia Srl Milano, Italia Numero Verde: 800 950934

Sverige Tel: 031-00

Plantronics Iberia, S.L. Madrid, Espaa Tel: 51 91
Daha fazla bilgi iin: www.plantronics.com
Plantronics, Inc. 345 Encinal Santa Cruz, CA 95060 USA Tlf.: 800-544-4660 www.plantronics.com
2008 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics Explorer, QuickPair and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth word mark and logo are owned by Bluetooth SIG, Inc. and any use of such marks by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners. U.S. Patents Pending 78563-03 Rev A