Plus U5-532 Manual
Plus U5-532 Home Cinema Projector, size: 3.7 MB
Here you can find all about Plus U5-532 like manual and other informations. For example: review.
Plus U5-532 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Plus U5-532 please write about it to help other people. [ Report abuse or wrong photo | Share your Plus U5-532 photo ]
User reviews and opinions
|apowell656||3:33pm on Saturday, September 4th, 2010|
|In recent years the cost of a digital data projector has reduced considerably and it is now possible to find small portable projectors for under £500.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Checking the Supplied Accessories
Remove the main unit and the accessories from the box and check that the following items are included. Wireless remote control unit with laser pointer  / Size AAA batteries  Applicable Projector: U5-632 This controls the projector. (See Page E-11.)
S-Video cable (Mini DIN 4-pin plug, 2 m / 6.6 feet)  This cable is used in the connection of video equipment that has an S-video connector. Connections are described on Page E-19. No. 777704000
* The wireless remote control is sold separately for the U5532 and U5-512. VR-100 remote mouse set (sold separately) (Ordering code: 28-052) Wireless remote control unit (includes one button battery)  Applicable Projector: U5-532/U5-512 This controls the projector. Please remove the transportation insulation sheet at time of purchase. (See Page E-12.) Video cable (RCA pin plug, 2 m / 6.6 feet)  This cable is used in the connection of video equipment that has a video connector. Connections are described on Page E-19. No. 777703000
T C E P S A
R E IM T
O T U A
ZE EE FR
R E T N E
L E C N A C
RGB signal cable (Mini D-sub 15-pin, 2 m / 6.6 feet)  This is used in making connections with a personal computer. See Page E-17 about connections. No. 777709000
E Z E E R
Audio cable (Mini plug, 2 m / 6.6 feet)  This cable is used with equipment that has phono type audio jacks. Connections are described on Page E-21. No. 777705000
Power cable (1.8 m / 5.9 feet)  This power cable supplies power to the unit. See Page E-23 about connections.
Audio conversion adapter (Mini-jack/ RCA pin plug, 15 cm / 0.5 feet)  This cable is used with equipment whose audio connector is of the phono pin type. Connections are described on Page E-21. No. 777706000
USB cable (type A, 2 m / 6.6 feet)  Applicable Projector: U5-632 Used to perform mouse operations on a computer using the projectors remote control unit. Connections are described on Page E-35. No. 777707000
* The wireless remote control is sold separately for the U5532 and U5-512. VR-100 remote mouse set (sold separately) (Ordering code: 28-052)
Storage case (for projector and accessories)  This case is designed to hold the projector itself and its accessories. Use it when storing the projector.
HOW TO PUT THE PROJECTOR INTO THE STORAGE CASE Close the lens shutter or lens cap before putting the projector in its case, then fasten the projector in place with the Velcro belt. Place the accessories in the storage pocket.
Velcro strap Pocket
Cable storage pouch 
Users Manual (CD-ROM edition)  Users Manual (Simplified Edition) 
3 Opening the lens cap 4 Connecting the power cable and switching on the power
See Operating on Page E-23. See Finishing on Page E-25.
5 When selecting the language of menu displays, etc.
(Only when the power is first switched on following purchase) See When [Menu Language Select] Is Displayed Upon Switching On the Power on Page E-24.
6 Switching on the power of the personal computer and video equipment 7 Properly adjust the projection image to the screen
See Adjustment of the Projection Screen on Page E-26.
8 Selecting input equipment
See Input Selection on Page E-28.
9 Adjust the screen or video image
Adjust the image to the optimum condition as required. See the Table of Contents for the adjustment items.
About DLP projectors Though careful attention is paid to providing optimum quality, please note that with DLP type projectors, in rare cases there may be black spots or bright spots among the picture elements.
Note: * Please purchase a screen. * A component cable (order code 28-690), which is available separately, is required to connect a DVD player or other equipment with YCbCr connectors. * A component cable (order code 28-690), which is available separately, is required to connect high definition (HD) video equipment or other equipment with YPbPr connectors.
Use this information as a guide to find out about the screen size when the projector is placed at a certain location, or to find out the approximate size of a screen that will be required. Refer to the projection distance table for your projector model. When suspending the projector from the ceiling, change the projection method. See Vertical Flip on E-53.
U5-632 Screen Size and Projection Distance
The projection distance over which focussing is adjustable is 1.20 m (3.94 feet) to 9.59 m (31.46 feet). The projector should be placed within this range. Screen Size Designation (Inches)
Height from center of lens to top edge of the projection
100 80" 60" 38.4 " " " " "
Height from center of lens to bottom edge of the projection
Unit: m (feet)
1 (3.20.9 4) 1.1.9 0(5 2. 10.6.23.5 ) 4( 2. 6. 3 8.1.3 8( 3) 3. 8. 3 1.8 0. 1( ).3. 4.5 0).7 8( 13.4. 15 77.8).7 3( 15 220.127.116.11 8( 0) 17.20.9 6. 3) 64 7.9 8( 21.26.1 7. 8) 97 9.5 9( 26.1 5
Lens surface of the main unit
Screen size (Diagonal)
Screen Size Designation (Inches)
Screen Size Width x Height (m) (feet)
Connecting Personal Computers and Video Equipment
Connecting this unit with a personal computer permits presentation data to be projected as a large screen display at conferences, lectures, and on other occasions. Furthermore, connecting this unit to a DVD player or other video equipment source in combination with an audio/video amplifier and speaker system will allow you to enjoy convincing home theater.
Connections with Personal Computer
Please check the following before making connections with the personal computer. A suitable resolution for the U5-512 is dots (S-VGA) and the maximum displayable resolution is XGA (dots). A suitable resolution for the U5-632/U5-532 is dots (XGA) and the maximum displayable resolution is S-XGA (dots). Make changes to a displayable resolution at the personal computer side. Please check with Table of Supported Frequency on Page E-69. The setting method for the personal computer will differ depending on the specific model. Please read the personal computer instruction manual or the on-line help information, or contact the manufacturer of your personal computer.
Connect the projectors RGB connector using the included RGB signal cable.
When making connections with the RGB connector of the projector, please make the connection via the supplied RGB signal cable. The projector has been set to Auto at the factory; however, if it does not project, please change the input setting to RGB using the menu sequence of [Setup] [Input Format] [RGB]. See Input Format on Page E-56. If the USB cable is connected to the projectors MOUSE connector, mouse operations can be performed on the computer from the projectors remote control unit. Applicable Projector: U5-632 See Performing Mouse Operations on the Computer with the Remote Control Unit on Page E-35.
RGB signal cable (Supplied item)
Note: * Before making connections, check the power of the projector and the equipment to be connected is switched off. * When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook computer startup procedure as well as the operation that follows startup. Please consult the instruction manual of your notebook computer or the online help.
To Output the External Output Signal of a Notebook Computer
When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook computer startup procedure as well as the operation that follows notebook startup. Please consult the instruction manual of your notebook computer or the on-line help while performing the following procedure. sent from the notebook computer to the projector. 1 Check whether a signal is beingliquid crystal display of the notebook computer does not necessarily mean that an external An indication appearing on the output signal is being output. REFERENCE: When Resolution or Frequency is not displayed under Info. on the menu of the projector, this means that the external output signal is not being output from the personal computer. See Resolution/Frequency on Page E-60.
Adjuster button Lowering the projection image Lower the front adjusters using the operation described above. To lower the projection screen further, raise the rear adjuster. Fine adjustments are made by turning the left and right front adjusters. Make adjustments so that there is no rattling.
US DB Y
Note: When the projector has a suspended or rear installation is used, the orientation of the projection will need to be changed. Please see Vertical Flip on Page E-53.
V ID E O
A U D IO
M O U S E
C O N TR O L
This section describes the use of direct operation with the main unit or remote control buttons. For information about operation using the menu, see Menu Operation Method on Page E-40 and the various items on Pages E-47 to E-60.
This operation selects the input signal to be projected.
Main unit operation: Press the SOURCE button. (It will not function while the menu or the quick menu is displayed.) When Auto Source is On Whenever the SOURCE button is pressed, the projector automatically selects another source that has the next input signal. When Auto Source is Off The input selection condition used last time will be set. Each press of the button moves the selection one step in the sequence of RGB VIDEO S-VIDEO. Note that the various input signals will become the signal type set with [Input Format] SeeInput Format on page E-56. Remote control operation: Press the desired input selection button. RGB button. Switches the RGB input. VIDEO button.. The input switches between VIDEO and S-VIDEO each time the button is pressed. When Auto Source is On When an input signal is not present at the selected source, the projector automatically selects the next source that has an input signal.
When Auto Source is Off The projector switches to the selected source regardless of whether an input signal is present.
Note: * When you do not operate source selection, the projector will assume the input selection condition that was previously used. * See Auto Source on Page E-54 for information about the Auto Source on and off conditions.
This function automatically adjusts the position shift, screen size, vertical stripes, and color infidelity of the projected analog RGB input signal. Normally automatic adjustment is performed at the time of signal selection. Main unit operation/Remote control operation: Press the AUTO button. (This will not function while the menu or the quick menu is displayed.) A press of the AUTO button starts the automatic adjustment.
Note: * If the display position is shifted, vertical lines appear on the picture, or the projection is not good even after using automatic adjustment, please perform image adjustment manually. See Picture Adj. / Fine Picture / H Position / V Position on Page E-47. * When the image extends beyond the boundaries of the screen or is smaller than the screen, set Aspect to Auto. See Selection of Aspect Ratio on Page E-29 and Aspect on Page E-52.
Controlling the Projector from a Computer
Applicable Projector: U5-632/U5-532
Use the control connector if the projector cannot be operated with the remote control unit, for example when it is suspended from the ceiling. Connecting the computer and projector Use a commercially available serial cable (D-Sub 9-pin, straight) to connect the computers RS-232C connector to the projectors control connector (PC CONTROL).
Serial cable (D-Sub 9-pin, straight) (commercially available)
Note: * This function may not work with some computers. * Specialized knowledge is required to use the control connector. Consult a specialist, such as the person suspending the projector from the ceiling.
Use as a High-Brightness Monochrome Projector
Data comprising a lot of black-and-white content such as documents and spreadsheets can be projected as a highbrightness black-and-white image. While being projected, the image can be switched between black-and-white and color. Switching between color and black-and-white is done using the menus. For instructions on operating the menus, see Menu Operation Method on E-40. Select Color B/W Switching in the Setup menu, then press one of the or SELECT buttons on the remote control unit to select B/W. When selected, the image switches to a high brightness blackand-white image. Select Color to switch back to a color image. Press the CANCEL button on the remote control unit to close the menu display.
Protecting the Projector with the Security Lock
A password can be registered and the security lock set in order to protect the projector from unauthorized use. Registering the password The password is registered using the menus. For instructions on operating the menus, see Menu Operations on E-40.
(1) Select Security Lock in the Option menu and set it to Enable. The menu closes and the password registration display appears.
(2) Use the number buttons (1 to 4) to register the password. Be sure to input a 4-digit number. Example: Registering the password 2441 (1) Press number button 2. An (asterisk) appears at the first place. Next press number buttons 4, 4 and 1 in that order. Asterisks appear in all four places.
(2) Input the password again. An appears when the input number matches. If there is a mistake, the asterisks turn off. Start over from step (1) above. If the password matches, the password registration display closes.
Using the Quick Menu
This function permits frequently used adjustments to be performed quickly. Note that the Quick Menu will not be displayed unless the signal of the connected equipment is input. Please select the input that you wish to adjust. (1) A press of the QUICK MENU button brings up the quick adjustment display. Further presses cause the adjustment display to change in sequence. The adjustment display can be selected with use of either the SELECT or button. (2) Press the cursor or button to make the adjustment. (3) To close the display immediately, press the CANCEL button. In the absence of operations for a period of about 10 seconds, the display will close automatically.
(2) (1) (3)
Content of Adjustments and Settings
Example: Brightness adjustment display
Brightness Contrast Keystone Volume Presentation timer Quick Color Adj.
Adjusts the brightness of the image. See page E-47. Adjusts the contrast of the image. See page E-47. Corrects (vertical) keystone distortion of the screen. See page E-31. This function adjusts the volume of the built-in speaker. See page E-31. Sets the time of the presentation timer. See page E-33. Select the preset color mode. See page E-49
Menu Operation Method
This section describes only the menu operation method. Please see this item should you need information while performing menu operations. For information about a menu function, adjustment, or setting, please see one of the pages containing such descriptions. Adjustments and settings are made by projecting an image and adjusting to an optimum condition. The remote control should be pointed toward the remote control sensor of the projector and operated. To return the various items that have been changed via the menu to their standard values (i.e., default values at time of shipping from the factory), see Factory Default on Page E-59. (Some items will not return to their initial values.) The adjustment/setting items and contents will differ depending on the input selection and the adjustment/setting items that can be used with the input signal are displayed on the menu.
Names and functions of remote control unit buttons used for menu operations
MENU button Used for menu display and menu closure.
SELECT () buttons Used in the selection of menu names and item names as well as in setting and adjusting the item contents. CANCEL button Used to return to menu name selection as well as to close the menu (and the sub menu display).
ENTER button Used to set the verification display.
SELECT () buttons Used in the selection of menu names and item names as well as in setting and adjusting the item contents. ENTER button Used to set the verification display.
CANCEL button Used to return to menu name selection as well as to close the menu (and the sub menu display).
Menu Screen Names and Functions
Menu Name This is the title of the menu. There is a change to the title screen when the menu is selected. The cursor moves to the selected menu name.
Cursor (Deep Blue) This permits setting/adjustment of the item located at the cursor position.
Applicable Projector: U5-632 Not selectable for other models.
Item Name This is the name of the adjustment or setting.
Icon: Pressing the ENTER button displays the sub menu or setting contents.
Adjustment Bar and Settings Contents Adjustment Bar: The increases and decreases in bar length express the adjustment condition. Setting Contents: Displays the contents that have been set. Sub menu Adjustment Bar
Performing Menu Operations
Only Setup, Options and Info. can be selected when no signal is being input. The menu display will close if, after pressing a button, the next button operation is not made within 30 seconds. The adjustment and the setting values are stored even when the power is switched off or the plug is disconnected from the power outlet. (Note that some items are not stored.) Preparation Switch on the power of the connected equipment, start the play operation or another operation, and input the signal to the projector. Select the input that you wish to adjust. The menu display of the description diagram depicts an example in which the Keystone item name is selected.
Press the MENU button to display the menu
The menu name that existed when the menu was closed previously will be displayed.
Selection of the Menu Name
Press the SELECT () button to select the menu name
Each press of the SELECT button advances the selection one step in the sequence of Color View Setup Option Info. Image. Each press of the SELECT button causes a return of one step. The cursor moves to the selected menu name.
Note: Please check that the cursor of the item name has disappeared at the time of menu name selection. Press the CANCEL button to make the cursor disappear.
Displaying the Cursor
Press the SELECT button to display the item name selection cursor.
This condition allows selection of the item name.
Selection of the Item Name
Press the SELECT () button to align the cursor with the item name
Items for which the Icon Is Displayed Press the ENTER button to display the submenu. Press the SELECT () button and align the cursor with the desired item name. There are also some items for which the setting display or the verification display will appear. Please see the various item descriptions.
Press the SELECT () button and make the adjustment (or setting) while viewing the image
When a button is pressed, the image will also change.
Adjustment display: Each press of the button results in a change of 1 point and continued presses cause changes to proceed in order. Setting display: The setting contents display changes with each press of the button.
Closing the Menu
Press the MENU button and close the menu display
Selecting Another Menu Name with Remote Control Operation
When a sub menu is displayed, press the CANCEL button and close the sub menu. Press the CANCEL button again to turn off the item name cursor.
Press the SELECT () button and select the menu name. (Menu names cannot be selected when the item name cursor is displayed.)
Note: A press of the QUICK button while the menu is displayed will close the menu and display the quick menu. A press of the MENU button while the quick menu is displayed will close the quick menu and display the menu.
List of Item Names Offering Input Selection and Adjustments/Settings
The item names that can be adjusted/set will differ depending on the input signal.
[Example of Menu Display Items at the Time of Input Signal RGB Selection]
Brightness Contrast Color Tint Sharpness Picture Adj. Fine Picture H Position V Position Reset
Sub Menu Item Name
Quick Color Adj. Gamma Color Temp. White Color Space White Balance
Aspect Filter Vertical Flip Horizontal Flip Keystone Keystone Save
Tint can be adjusted only at the time of NTSC composite/S signal input.
u om t Si gn R pon al G B en t VI D E S- O VI D EO
E-47 E-47 E-47 E-47 E-47 E-47 E-48 E-48 E-48
E-48 E-49 E-49 E-50 E-50 E-50 E-51 E-52 E-52 E-53 E-53 E-53 E-53
Color B/W Switching Auto Source Auto Power Off Memu Position Lamp Mode Input Format
RGB Video S-Video
Language On Screen Background Startup Screen Security Lock
Status Factory Default Lamp Timer Reset Resolution Frequency Lamp Timer
u om t Si gn R pon al G B en t VI D EO SVI D EO
E-54 E-54 E-54 E-55 E-55 E-56 E-56 E-56 E-56 E-57 E-57 E-57 E-58 E-58 E-59 E-59 E-59 E-60 E-60 E-60
Perform this operation while projecting the picture for which the adjustment/setting will be made. Select the menu name Image. See Menu Operation Method on Page E-40 for information about performing menu operations. The item name display will differ depending on the input signal. See List of Item Names Offering Input Selection and Adjustments/Settings on Page E-45.
Brightness / Contrast / Color / Tint / Sharpness
Picture qualities such as brightness and contrast will change depending on the whether the room is bright or dark. Please adjust to suit your preference. Select the desired item name and then adjust with the SELECT () buttons. Item Name Brightness Contrast Color Tint Sharpness SELECT Button Darker Less contrast Less dense color More red Softer image SELECT Button Brighter More contrast Denser color More green Sharper image
Note: * The adjustment values of the adjustable items are stored according to input source. * Tint can only be adjusted when inputting NTSC composite/S-Video signals or component signals.
Picture Adj. / Fine Picture / H Position / V Position
Usually, automatic adjustment is performed at the time of signal selection, but when automatic adjustment is not effective, these adjustments can be performed.
Note: When the image extends beyond the boundaries of the screen or is smaller than the screen, check that the View Aspect setting is set to Auto. See Aspect on Page E-52.
Picture Adj. (Picture Adjustment)
Adjust this when bright and dark vertical bands appear on the screen. Select the Picture Adj. item name and adjust with the SELECT () buttons so that the vertical bands disappear and brightness becomes uniform across the screen.
Adjust this when the picture shows a lack of color fidelity or flickering. Select the Fine Picture item name and adjust with the SELECT () buttons so that the lack of color fidelity or the flickering disappears.
Adjust this when the picture is shifted to the left or right. Select the H Position item name and adjust with the SELECT () buttons.
Adjust this when the picture is shifted up or down. Select the V Position item name and adjust with the SELECT () buttons.
This function resets (i.e., returns to the standard settings) the adjustment/setting value of the Image menu name. A press of the ENTER button forces the reset.
Note: * The item name Fine Picture at the time of RGB input will not be reset. * Reset of the menu name Image can be reset for each input source. * To reset the adjustments/settings of all the menu items (while noting that there are some items that cannot be reset), see Factory Default on Page E-59.
Do the following operation while displaying the image you want to adjust or set. Select the menu name Color. See Menu Operation Method on Page E-40 for information about performing menu operations. The item name display will differ depending on the input signal. See List of Item Names Offering Input Selection and Adjustments/Settings on Pages E-45.
Quick Color Adj.
Select the preset color mode. Select the Quick Color Adj. item name and select the setting contents with the SELECT () buttons. Picture. Select this to prioritize color. Standard.. This is the standard selection. (Default setting) Dynamic.. Select this for prioritizing brightness. * When Picture, Standard or Dynamic is selected, the Gamma, Color Temp. and White adjustment items are displayed in gray and cannot be selected or adjusted. Custom. Gamma, Color Temp. and White adjustment items can be selected and adjusted * The selected values for the different adjustment items are stored in the memory so the desired color adjustments can be set.
3. Press the ENTER button. The display will change to [Adjusting Black] and the black level will be adjusted.
The adjustment of the black level is completed and the display changes to [Input White Signal]. The screen background color of the connected personal computer will be set to white. Press the ENTER button. The display will change to [Adjusting White] and the white level will be adjusted.
[White balance complete] is displayed for a while and the adjustment is completed.
Perform this operation while projecting the picture for which the adjustment/setting will be made. Select the menu name View. See Menu Operation Method on Page E-40 for information about performing menu operations. The item name display will differ depending on the input signal. See List of Item Names Offering Input Selection and Adjustments/Settings on Page E-45.
This function sets the horizontal and vertical picture proportions of the input signal. Select the item name Aspect and select the setting contents with the SELECT () buttons. Personal Computer Signal Auto. Automatically enlarges or reduces the image to project a full screen in a ratio of 4:3 Direct.. Maintains the aspect ratio and projects a picture of the maximum displayable size Real. Projects the input signal without pixel conversion Video Signals Auto. While maintaining the aspect ratio, projects a full screen so that no portions extend beyond the boundaries of the screen. The top and bottom of the 16:9 image becomes black. Wide. Projects to fill the full width with the entire image at 16:9. (This feature is used to project a squeezed image in a proper aspect ratio.) Zoom.. Projects only the 4:3 portion within 16:9 image to fill the screen. (Portion that extend off screen is cut.) See Selection of Aspect Ratio on Page E-29 for diagrams of projection screen images that correspond to the input signals.
Note: Please note that using this monitor for the purpose of commercial gain or the attraction of public attention in a venue such as a coffee shop or hotel and projecting a 4:3 screen in wide mode or leaving a squeezed screen as a compressed image raises concern about the infringement of the copyright holders rights which are protected by copyright law.
This function sets the sharpness when the input signal is adjusted to the resolution of the projector and enlarged or reduced. Select the item name Filter and select the setting contents with the SELECT () buttons. Smaller numerical values result in a sharper picture and larger values result in a softer picture. Please select your desired setting value.
In selecting the method of projecting to the screen, these functions are set when the projector is in a suspended or a rear screen installation. Select the item name Vertical Flip or Horizontal Flip and select the setting contents with the SELECT () buttons.
Vertical Flip Off Horizontal Flip Off
Vertical Flip Off Horizontal Flip On
Vertical Flip On Horizontal Flip On
Vertical Flip On Horizontal Flip Off
Keystone distortion will occur when the projector and screen are on an angle (in the vertical orientation). This function is used to correct this distortion. Select the item name Keystone and correct the keystone distortion using the SELECT () buttons.
Note: * The menus and other on-screen displays cannot be adjusted. * Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion completely.
This function is used to save the keystone adjustment values. Setting Keystone Save to on will set the previous keystone adjustment values when projecting after the power cable has been disconnected and then reconnected. Select the item name Keystone Save and set with the SELECT () buttons. Off. The keystone adjustment values return to the initial values when the power cable is unplugged. On.. The keystone adjustment values are retained in storage even when the power cable has been unplugged.
Note: Regardless of whether Keystone Save is set to On or Off, when projection is from the standby condition, the picture is projected using the previous keystone adjustment values.
Select menu name Setup. See Menu Operation Method on Page E-40 for information about performing menu operations. The item name display will differ depending on the input signal. See List of Item Names Offering Input Selection and Adjustments/Settings on Page E-45.
Color B/W Switching
Documents, spreadsheets or other mostly black and white data can be projected with stronger brightness. It is possible to switch between the black/white and color mode while an image is being projected. Select the Color B/W Switching item name, then use the and SELECT buttons to select the desired setting. Color. The color image projection mode is set. B/W. The high brightness black/white image projection mode is set.
The Auto Source function automatically detects the input signal when the power supply is switched on and when the input is switched. Select the item name Auto Source and select the setting contents with the SELECT () buttons. On.. Switches on the automatic detection function Off. Switches off the automatic detection function Signal Detection Order When On The sequence of RGB VIDEO S-VIDEO is searched repeatedly. When a signal is detected, the search is stopped and the image is projected.
This function returns the adjustments and settings of all the input sources to the standard factory default values. Select item name Factory Default and press the ENTER button. There is a change to the display [Press ENTER to Factory Default Set]. Press the ENTER button to initialize. To cancel, press the CANCEL button and there will be a return to the menu. Items that are not set to the factory default: Projection method, Language and Lamp Timer and Security.
Lamp Timer Reset
This function resets the lamp timer. Be sure to perform the reset operation when the lamp cartridge has been replaced. Select item name Lamp Timer Reset and press the ENTER button. There is a change to the display Press ENTER to Lamp Timer Reset. Press the ENTER button to initialize. To cancel, press the CANCEL button and there will be a return to the menu.
Resolution / Frequency
This function displays the resolution and frequency of the detected input signal.
This displays the lamp timer. This projector has an Eco mode function. The lamp life will differ between Normal mode and Eco mode. Lamp Life Use only in Normal mode: approx.2000 hours Use only in Eco mode: approx.3000 hours * Lamp life will differ when there has been switching between the modes. When Lamp Life Has Been Reached Replace the Lamp Cartridge is displayed on the screen for 10 seconds in a 1-minute interval. Please replace the lamp with a new one. See Replacing the Lamp Cartridge on Page E-64 for information about lamp cartridge replacement. When Over 100 Hours Have Elapsed Since Reaching Lamp Life (Including Eco Mode) [Warning!! System Shutdown] is displayed for 10 seconds and the power is switched off. Pressing the STANDBY button under this condition will not switch on the power. Please replace the lamp cartridge.
When an Indicator is Lit or Flashing
The indicators on the projectors control panel light or flash to notify of problems, as described below. An indicator is also used to notify you of the currently set power mode (under normal circumstances). See Power Cable Connections and Switching the Power On/Off on page E-23. STATUS indicator
US AT ST Y DB AN ST
STANDBY indicator Indicator status
What you should do It is time to replace the lamp. Replace with a new lamp cartridge.
Lit red When the power is on (Lit green) Standby (Lit amber) Lit red
Flashing amber for 60 seconds, then lit amber Flashing red (lit for 1 seconds/off for 1 seconds) Lit red
1 Unplug the power cord. 2 Turn the projector upside-down. 3 Remove the lamp cover.
(1) Turn the lamp covers set screw counterclockwise and loosen until the screw turns freely. (The screw does not come off.) (2) Open the lamp cover a little, then pull it in the direction of the arrow and remove it.
4 Remove the lamp cartridge.
(1) Turn the lamp cartridges screw counterclockwise and loosen them until the screw turn freely. (The screw do not come off.) (2) Grasp the lamp cartridges handle and pull upward to remove the lamp cartridge.
5 Mount the new lamp cartridge.
(1) Push the lamp cartridge in slowly. (Line it up with the screw holes in the projector.) (2) Turn the lamp cartridge screw clockwise to tighten them.
6 Mount the lamp cover.
(1) Set the tip of the lamp cover in place, then close the lamp cover. (2) Turn the lamp covers screw clockwise to tighten it.
7 Reset the Lamp Timer.
Connect the power cable, switch on the power, and then reset. Select [Info.] [Lamp Timer Reset] on the menu and press the ENTER button. There is a change to the initialization verification display. Press the ENTER button again. See Lamp Timer Reset on Page E-59.
Note: After reaching the lamp service life, if the lamp is used for more than another 100 hours, it will not be possible to switch on the power. Should this happen, while the projector is in the standby mode, simultaneously holding down the projectors SOURCE button and AUTO button for more than 5 seconds will clear the lamp timer. Checking that the STATUS indicator is out will show that the lamp timer has been cleared. Contact a store that sells the U5-632/U5-532/U5-512 for a replacement lamp. Indicate you need a U5-200 replacement lamp for the U5-632/ U5-532/U5-512 (order code 28-050).
Method of projection : DMD Lamp Projection lens : Image size Light Output Contrast Ratio DLP (single chip DMD) 0.7 inches 1024 867dots 200 W high pressure mercury lamp Manual zoom ( ,)2.1Manual focus F = 2.6 2.9, f = 18.4 22.1 mm (f = 0.72 0.87 inch) Minimum: 38.4 inch (at projection distance of 1.2m(3.9 feet) telephoto) Maximum: 300 inch (at projection distance of 8.0m(26.2 feet) wide) Standard mode: 2200 lumens (in the Dynamic mode) B/W mode: 3000 lumens (in the Dynamic mode) 2000:1 (Full on/off) Video (NTSC3.58/NTSC4.43/PAL/PAL-N/PAL-M/PAL60/SECAM/YCbCr(NTSC, PAL)/ YPbPr(480p, 576p, 1080i, 720p)): (automatic or manual switching) RGB (Horizontal :15 to 80 kHz, Vertical 50 to 85 Hz) Full color (16,770,000 colors) VGA (640 )084expansion/true, S-VGA (800 )006expansion/true XGA (1024 )867true, S-XGA (1280 )4201compression 2.8/1.4 A 100 120/V AC, 50/60 Hz 280 watts (250 watts in eco mode) 216 mm (W) 06mm (H) 252mm (D) (not including protrusion) 8.5 in.(W) 4.2in.(H) 3.01in.(D) (not including protrusion) Approximately 2.0 kg / 4.4 lbs Data projector: 5 to 35C (41 to 95F), 30 to 85% humidity
XCA4500 2033 HA Singer 7466 GXT600VP4 C2000 P31 NEO MS-1922G 435DX MY220V RSH7znrs SA10109-11P1 53 HW Airblade AB03 MZ-R501 SLK350 2F2611 SDV4235 FX370C F1D104-USB TY-WK6p1RW 1 Twin SC6240 Printer 32WLA520HD SR-S20FTC SH12ZSG ROC 6505 535-1998 Gigaset SL74 P1130 FX-9860G AU GA-X58a-ud3R Mini 2102 TI-nspire Scanner Naturallyspeaking 7 Telecaster RMX 2000 Kansas DJ 62840 TX-32LX52F PS50B610 JX-3P Scenic XS Twin TWO TX-DS484 Ellipse 500 KRF-V5010 NAD PP1 Gen KX-TG9344 NV-HV60EBL Keypad Vity125-2008 Card NV-HD630B Luna 450 Optura 30 BMW 318 SGH-L810 Lovin HUG Enterprise TLP 650 Naturallyspeaking 8 MU-A09YV DEH-P2550 PI 2550 RT-250 HT-SF1100 B1415J HL-5130 DCR-SR80 AW-E650 ADC514E SA-HT75 TI8662N GR-D326E Review Temporis 250 Wl-578 Portable G-4100 HT-K170 Trifinder 2 NS-8390 20-0500 DES-1210-52 Lexmark E320 P4SDR-VM M-6500A PT-LC56U DCP 385 G7E XT Powermaxx LI I5801 Carrera 4 6000 CR Display Fp-IN9 SLI Travelmate 5520 SH12zwhd-XSA
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101