Reviews & Opinions
Independent and trusted. Read before buy Plus V-332!

Plus V-332

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Plus V-332 Home Cinema Projector, size: 2.8 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Plus V-332Plus 28-056 Original Replacement Lamp
Do not hesitate to contact our sales staff if you have any questions.

Details
Brand: PLUS
Part Number: 28-056
UPC: , 086035280563


Here you can find all about Plus V-332, for example manual and review. You can also write a review.

 

[ Report abuse or wrong photo | Share your Plus V-332 photo ]

Video review

Turtle setup plus building process

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 4. Page 1 of 1. Average Rating:
jameschu 5:25pm on Monday, August 30th, 2010 
The Lexmark X2350 prints, scans and copies making it the smallest all-in-one. There is a single ink cartridge and is easy to replace.
p0732658 8:10am on Monday, August 30th, 2010 
very nice, not to big. copy fast and with great quality also the price is right. thank newegg. your the best none Shoulda stuck with HP. Prints pretty fast Software is screwy.
edjac 10:48am on Sunday, July 18th, 2010 
Great Printer This, is not the best printer.. But it does the job. I have had it for over 5 years, and the only reason it broke. Lexmark All-inOne Sirs; I purchased this for the first one and rate it with a 3 because of that fact. I use it occasionally but do enjoy it.
adozier 1:35am on Sunday, May 9th, 2010 
Tim Robertson MyMac.com Review Lexmark E332n Laser Printer - Review Company: Lexmark Price: $499 US http://www.lexmark.com

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Unplug

&G
Ultraportable at just 2 lbs. P LU S

INTRODUCES THE

V-332,

AN ADDITION TO THE FIRST

1,200 ANSI lumens corner-tocorner brightness Manual Zoom and Focus
PROJECTORS EVER TO WEIGH ONLY TWO POUNDS.

THE V-332 PICO

Digital zoom instantly targets and enlarges the fine print at the touch of a button Connects to virtually any computer or video source Digital keystone correction Wireless remote control and built-in control panel
PROJECTOR MAY BE SMALL, BUT IT IS MIGHTY POWERFUL.

WITH 1,200

LUMENS,
XGA CLARITY, NEW FEATURES LIKE UNPLUG & GO AND

THE NEWLY PATENTED

IRIS LENS COVER, THE V-332 IS THE MOST
Unplug & Go HDTV compatible
IDEAL PROJECTOR TO TAKE ANYWHERE.

Presentation Timer

9610 SW SUNSHINE CT. SUITE 800 BEAVERTON, OR 97005 866-427-8855 503-748-8700 www.plus-america.com
Newly Patented Iris Lens Cover
Specifications Resolution RGB Signal V-332 XGA, 1024 x 768 pixels XGA (true) SXGA (compressed) SVGA/VGA (expansion/true) 1200 Lumens 2000:1 (Full on/off) 4:3, supports 16:9 F=2.6-2.9 f=27.5-33mm 1:1.2 Manual Zoom Manual Focus +17/-22 degrees 2x 190-watt lamp, 1,500 hrs. 2,000 hrs. in Eco-mode 16.7 million colors Front/rear, Table/ceiling (upright) 3.9-38ft / 1.2-11.8 m 26-300 diagonal NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM, YCbCr (NTSC, PAL), YPbPr (480p, 576p, 720p, 1080i) Mono 0.5 watt 1.8 in./46 mm 7.3 in./186 mm 6.9 in./176 mm 2.8 lb./1.3 kg
Brightness Contrast Ratio Aspect Ration Projection Lens

Presentation Screens

Choose from a variety of portable presentation screens from PLUS. They will save the day in any presentation environment.
Digital Keystone Correction Digital Zoom Light Resource Color Palette Projection Positions Projection Distance Image Size Video Signal

Replacement Bulbs

PLUS offers a wide array of replacement bulbs so you can carry a spare anywhere.
Audio Dimensions Excluding Lens and Stand: Height Width Length Weight
Included Accessories: Wireless remote control Power cable (6 ft./1.8 m) Video cable (6.5 ft./2 m) Soft carrying case Users manual
Optional Accessories: ATA shipping cases VGA cables (9-12 ft./2.7-3.6 m) 3.5mm, 4-pole plug to RCA component cable (5ft./1.5 m) 15-pin to RCA component cable (10 ft./3 m) Presenter-2-Go - laptop-free presentation system Display-to-Go - output DVI from any laptop Ceiling mount kit

Remote Controls

Choose from a variety of wireless remotes to fit any presentation environment.

doc1

DATA PROJECTOR

Users Manual

IMPORTANT

* DLP (Digital Light Processing) and DMD (Digital Micromirror Device) are registered trademarks of Texas Instruments Incorporated (U.S.A.). * VGA and XGA are trademarks or registered trademarks of International Business Machines Corporation (U.S.A.). * S-VGA is a registered trademark of Video Electronics Standards Association. * Microsoft, Windows, and PowerPoint are registered trademarks of Microsoft Corporation (U.S.A. and other countries). * Macintosh is a trademark of Apple Computer Inc. (U.S.A.). Note that even in the absence of explanatory notes, serious attention is paid to the trademarks of the various companies and to the product trademarks.
IMPORTANT SAFETY INFORMATION

Precautions

Please read this manual carefully before using your PLUS Data Projector and keep the manual handy for future reference.

CAUTION

TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PLUS SERVICE PERSONNEL. This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside of this unit. This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems. The above cautions are given on the bottom of the product.

WARNING

TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNITS GROUNDED PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THREE PRONGS CAN BE FULLY INSERTED. DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. ALL SERVICING MUST BE DONE BY QUALIFIED PLUS SERVICE PERSONNEL.
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

RF Interference WARNING

The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by PLUS Vision Corp. in this manual. Failure to comply with this government regulation could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

DOC Compliance Notice

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Hg: Lamp in This Product Contains Mercury. Dispose of Lamp According to Local, State or Federal Law.

Important Safeguards

These safety instructions are to ensure the long life of the unit and to prevent fire and shock. Please read them carefully and heed all warnings.

Installation

For best results, use the unit in a darkened room. Place the unit on a flat, level surface in a dry area away from dust and moisture. Do not place the unit in direct sunlight, near heaters or heat radiating appliances. Exposure to direct sunlight, smoke or steam can harm internal components. Handle the unit carefully. Dropping or jarring can damage internal components. Do not place heavy objects on top of the unit.

Power Supply

The unit is designed to operate on a power supply of 100 - 240 V 50/60 Hz AC. Ensure that your power supply fits these requirements before attempting to use the unit. Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or fire. Disconnect the power cable (mains lead) from the power outlet after using the unit. Before disconnecting the power cable, make sure that the STANDBY indicator lights in amber (not blinking or in green).

Sharp, clear picture

The DLP display system affords RGB color fidelity and inconspicuous gaps between the individual dots, thereby permitting the display of small characters and diagrams with distinct clarity.
High contrast ration of 2000:1
Use of a new generation of DMD devices has given birth to an amazing 2000:1 high contrast ratio. By widening the difference of brightness between black and white, you can see a degree of sharpness that is greater than just the brightness based on specifications.
Powerful functions for presentations
A wide variety of easy-to-set functions have been built into the projector, from a digital keystone correction function (used when making settings) that corrects picture distortion, to an auto adjustment function that automatically identifies the PC signal. There is also a built-in Presentation Timer function for further presentation convenience.
Great moving image playback capabilities using the same principles as DLP Cinema technology
Plus DLP type projectors have the same makings as the DLP Cinema technology used in movie theaters. Because of their extremely fast response, even images with much movement sports, movies play smoothly without blurring.

Security lock function

The lock can be set so that a password must be input when the projector is started up. Without the correct password, no operations other than turning the power on and off can be performed. This function effectively protects the projector from unauthorized use.
Eco-mode switch function for the lamp output
Using the lamp Eco-mode will extend the life of the lamp and lower the power consumption. By switching the lamp mode to suit your operating environment, you will save on lamp cost as well as contribute to energy conservation and ecology.

Table of Contents

IMPORTANT SAFETY INFORMATION... E-2 Major Features.... E-4 Table of Contents.... E-5 Checking the Supplied Accessories... E-7 Names of the Main Unit Parts.... E-8 Names of the Remote Control Parts... E-10 Preparing the Remote Control.... E-11 Button Battery Replacement... E-11 Remote Control Range... E-11 The Procedure Up to Projecting to the Screen... E-12 Placement Guide.... E-13 Screen Size and Projection Distance.. E-13 Connecting Personal Computers and Video Equipment.. E-14 Connections with Personal Computer... E-14 Connect the projectors RBG connector using the included RGB signal cable. E-14 To Output the External Output Signal of a Notebook Computer.. E-15 Connections with Composite Signals.. E-16 Video Equipment with VIDEO Connectors... E-16 Video Equipment with S-VIDEO Connectors.. E-16 Connections with Component Signals... E-17 When the Video Equipment Has a YCbCr Connector or YPbPr Connector. E-17 Connections with the AUDIO Jack... E-18 Power Cable Connections and Switching the Power On/Off.. E-19 Operating.... E-19 Finishing.... E-21 Adjustment of the Projection Screen... E-22 Adjustment of the Projection Screen... E-22 Making Adjustments with the Adjusters.. E-23 General Operation.... E-24 Input Selection.... E-24 Automatic Adjustment.... E-24 Selection of Aspect Ratio... E-25 Freezing a Moving Picture.... E-26 Cancelling Video and Audio Temporarily.. E-26 Lamp Mode.... E-26 Keystone.... E-27 Adjustment of the Volume... E-27 Enlargement of the Image and Video Movement.. E-28 Using the Presentation Timer... E-29 Protecting the Projector with the Security Lock.. E-30 Using the Quick Menu.... E-32 Menu Operation Method.... E-33 Performing Menu Operations... E-35 List of Item Names Offering Input Selection and Adjustments/Settings.. E-38 Image..... E-40 Brightness / Contrast / Color / Tint / Sharpness... E-40 Picture Adj. / Fine Picture / H Position / V Position.. E-40 Reset.... E-41 Color.... E-42 Quick Color Adj.... E-42 Gamma.... E-42 Color Temp.... E-43 White.... E-43 Color Space.... E-43 White Balance.... E-44

Speaker Zoom ring [E-22]

Ventilation slots
M EN U Q ME UIC NU K ST AT US
Remote control sensor [E-11] Lens Lens cover
Lamp cover [E-58] Rear adjuster [E-23]

Front adjusters [E-23]

Built-in Security Slot
This security slot supports the MicroSaver Security System manufactured by Kensington Microware Inc.

Exhaust vents

CLOZ E
Built-in security slot (See description below.) Focus ring [E-23]
Adjuster button [E-23] (Also on opposite side)
STANDBY indicator [E-19, 54]
Buttons used in menu and quick menu operations [E-32, 33]

STATUS STANDBY

STATUS indicator [E-19, 54] AUTO button [E-24]

SOURCE

STANDBY button [E-19]
SELECT () buttons ENTER button [E-20] SOURCE button [E-24]

MENU button [E-33]

MENU QUICK MENU

QUICK MENU button [E-32]

S ST AN D BY
Remote control sensor [E-11]

NU Q ME UIC NU K

AC IN connector [E-19]

Ventilation slot

MOUSE connector A separately sold VR-100 Remote Mouse Set (ordering code: 28-052) is required to use the MOUSE connector. VIDEO connector [E-16]

MOUSE AUDIO

S-VIDEO
S-VIDEO connector [E-16] RGB connector [E-14, 17] AUDIO connector [E-18]

SE U O M IO D AU B G R

EO D VI

EO D VI S-

Names of the Remote Control Parts
T E IM T E C A U O T M O O Z R
Infrared transmitter [E-11]
STANDBY button [E-19, 21] This button is used to switch ON the power and set the unit to the STANDBY mode.
Buttons used for input selection [E-24] RGB button and VIDEO button (Video / S-Video)
Buttons used for menu operations [E-33] and buttons are The , , the select (, , and ) buttons.

STANDBY

QUICK button [E-32] (Displays a simplified menu)
MUTE button [E-26] (Temporarily cancels the video and audio) Number buttons [E-30] (Used for the security lock.) FREEZE button [E-26] (Freezes moving pictures) VOL button [E-27] (Volume adjustment)

STANDBY QUICK MENU

STATUS

50 7m/23.0 feet

Remote control infrared transmitter Remote control sensor Top View
Note * Exposure of the main unit's remote control sensor or the remote control infrared transmitter to bright light or the obstruction of the signal by an obstacle located in the pathway may prevent operation. * The remote control will not function when the battery is exhausted.

C R 2 5

3m. /et fe
The Procedure Up to Projecting to the Screen
Perform setup adjustments in the following order.

1 Position the projector

Determine the locations to set up the screen and the projector. See Placement Guide on Page E-13.
2 Connect the video equipment and personal computer
Connect your equipment to the projector. When making connections with the personal computers RGB connector, see Connections with Personal Computer on Page E-14. When making connections with the video equipments video connector or an S-video connector, see Connections with Composite Signals on Page E-16. When making connections with the video equipments YCbCr connector or YPbPr connector, see Connections with Component Signals on Page E-17. When playing the audio through the built-in speaker of the projector, see Connections with the AUDIO Jack on Page E-18.
3 Connect the power cable and open the lens cover.
See Operating on Page E-19. See Finishing on Page E-21.
4 When selecting the language of menu displays, etc.
(Only when the power is first switched on following purchase) See When [Menu Language Select] is Displayed Upon Switching On the Power on Page E-20.
5 Switching on the power of the personal computer and video equipment 6 Properly adjust the projection image to the screen
See Adjustment of the Projection Screen on Page E-22.
7 Selecting input equipment
See Input Selection on Page E-24.
8 Adjust the screen or video image
Adjust the image to the optimum condition as required. See the Table of Contents for the adjustment items.
About DLP projectors Though careful attention is paid to providing optimum quality, please note that with DLP type projectors, in rare cases there may be black spots or bright spots among the picture elements.
Note: * Please purchase a screen. * A component cable (order code 28-690), which is available separately, is required to connect a DVD player or other equipment with YCbCr connectors. * A component cable (order code 28-690), which is available separately, is required to connect high definition (HD) video equipment or other equipment with YPbPr connectors.

Placement Guide

Use this information as a guide to find out about the screen size when the projector is placed at a certain location, or to find out the approximate size of a screen that will be required. The projection distance over which focussing is adjustable is 1.20 m (3.9 feet) to 14.17 m (46.50 feet). The projector should be placed within this range.

Screen Size and Projection Distance
Screen Size Designation (Inches)

30 0"

0"
Height from center of lens to top edge of the projection
Height from center of lens to bottom edge of the projection

"

.5 0) 46

Unit: m (feet)

1. 20 ( (5 1.5 3.4).1 .(7 2.3.0 5.7) 3. . 12 9. 80 3. 91 3.(1 ) 0 4. 70.4. 70 (12 2.3.8 0) 3 5. 5. ( 42 5. 15 ) 89.7. 8. 5 (1 0) 9. 7. 8. 23. ) 7. ( 86 23.9. (2 7.5. 79 ) 9. 1.95 ) 1. 81 (3 2. 38.8.3) 14.(3 8. 76

STATU S STAN DBY

Lens surface of the main unit
* There is a tolerance of 5% due to design values. * This table uses the lens apex and lens center as references and requires that the projector be in a horizontal condition (with front and rear adjusters fully withdrawn).

QUICK MENU

MOUSE AUDIO RGB S-VIDE O VIDEO

Screen size (Diagonal)

Height
Screen Size Width x Height (m) 0.53 04.0 0.81 16.0 1.22 19.0 1.63 22.1 2.03 25.1 2.44 38.1 (feet) 1.73 03.1 2.67 00.2 4.00 00.3 5.33 00.4 6.67 00.5 8.00 00.6
Projection Distance (m) Wide Tele (feet) Wide Tele 3.94 5.04 6.08 7.64 9.19

Height h1 (m) (feet)

Height h2 (m) (feet)
26" 40" 60" 80" 100" 120" 150" 180" 200" 250" 300"

1.20 1.54 1.85 2.33 2.80

0.47 0.71 1.07 1.43 1.78 2.14 2.68 3.21 3.57 4.46 5.35
1.52 2.34 3.51 4.68 5.85 7.02 8.78 10.53 11.70 14.63 17.55
0.07 0.10 0.16 0.21 0.26 0.31 0.39 0.47 0.52 0.65 0.78
0.22 0.34 0.51 0.68 0.85 1.02 1.28 1.53 1.70 2.13 2.55
3.12 3.75 10.23 12.30 3.91 4.70 12.82 15.41 4.70 5.64 15.42 18.52 5.89 7.07 19.31 23.18 7.07 8.49 23.20 27.84 7.86 9.44 25.79 30.95 9.84 11.81 32.28 38.73
3.05 05.7 00.01 92.2 3.66 00.9 00.21 47.2 4.06 00.01 33.31 50.3 5.08 05.21 76.61 18.3
6.10 05.64 67.83 71.41 18.11 00.51 00.02 75.4
Connecting Personal Computers and Video Equipment
Connecting this unit with a personal computer permits presentation data to be projected as a large screen display at conferences, lectures, and on other occasions. Furthermore, connecting this unit to a DVD player or other video equipment source in combination with an audio/video amplifier and speaker system will allow you to enjoy convincing home theater.
Connections with Personal Computer

Please check the following before making connections with the personal computer. A suitable resolution for this projector is dots (XGA). The maximum displayable resolution is dots (SXGA). Make changes to a displayable resolution at the personal computer side. Please check with Table of Supported Frequency on Page E-61. The setting method for the personal computer will differ depending on the specific model. Please read the personal computer instruction manual or the on-line help information, or contact the manufacturer of your personal computer.
Connect the projectors RBG connector using the included RGB signal cable.
When making connections with the RGB connector of the projector, please make the connection via the supplied RGB signal cable. The projector has been set to Auto at the factory; however, if it does not project, please change the input setting to RGB using the menu sequence of [Setup] [Input Format] [RGB]. See Input Format on Page E-49.

MONITOR OUT

Personal computer
RGB signal cable (Supplied item)
Note: * Before making connections, check the power of the projector and the equipment to be connected is switched off. * When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook computer startup procedure as well as the operation that follows startup. Please consult the instruction manual of your notebook computer or the online help.
To Output the External Output Signal of a Notebook Computer
When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook computer startup procedure as well as the operation that follows notebook startup. Please consult the instruction manual of your notebook computer or the on-line help while performing the following procedure. sent from the notebook computer to the projector. 1 Check whether a signal is beingliquid crystal display of the notebook computer does not necessarily mean that an external An indication appearing on the output signal is being output. REFERENCE: When Resolution or Frequency is not displayed under Info. on the menu of the projector, this means that the external output signal is not being output from the personal computer. See Resolution/Frequency on Page E-53.

a sign not try below. 2 ShouldIBM PC/ATbe output from the notebook computer, pleaseany the operation described keys. (See the table below.) For an compatible computer, press the [Fn] key plus one of the [F1] to [F10]
Manufacturer Model Key DELL All computers Fn + F8 EPSON All computers Fn + F8 FUJITSU All computers Fn + F10 iiyama All computers Fn + F3 IBM All computers Fn + F7 NEC All computers Fn + F3 Panasonic All computers Fn + F3 SHARP All computers Fn + F5 SONY All computers Fn + F7 SOTEC All computers Fn + F3F5 TOSHIBA All computers Fn + F5 Victor All computers Fn + F10 Note: Table information is current to December 2003.
Note: When the liquid crystal display of the notebook computer and the projector are displayed at the same time, the projected image might not be correct even though the liquid crystal display shows a correct indication. Should this occur, stop the simultaneous display of the notebook computer and try the mode with external output only. Try an operation such as that described in aforementioned Step 2 and try closing the liquid crystal panel which might result in external output only.
Connections with Composite Signals
Video Equipment with VIDEO Connectors
Connect to the projectors VIDEO connector using a commercially available video cable. The input setting of the VIDEO connector has been set to Auto at the factory; however, if the projector does not project, please change the input setting to Your Countrys Television Broadcast System using the menu sequence of [Setup] [Input Format] [Video]. See Input Format on Page E-49.
Video Equipment with S-VIDEO Connectors
Connect to the projectors S-VIDEO connector using a commercially available S-Video cable. The input setting of the S-VIDEO connector has been set to Auto at the factory; however, if the projector does not project, please change the input setting to Your Countrys Television Broadcast System using the menu sequence of [Setup] [Input format] [S-Video]. See Input Format on Page E-49.
Video deck, DVD player, document camera, etc.
Video cable (RCA pin plug) (Commercially available)
S-Video cable (Mini DIN 4-pin plug) (Commercially available)
Connections with Component Signals

Selection of Aspect Ratio
This function selects horizontal and vertical picture proportions of the input signal. Press the ASPECT button while viewing the projected image and select the aspect ratio. Personal Computer Signal Each press of the ASPECT button advances the selection one step in the sequence of Auto Direct Real, and then repeats. Auto. Automatically enlarges or reduces the image to project a full screen in a ratio of 4:3 Direct.. Maintains the aspect ratio and projects a picture of the maximum displayable size Real. Projects the input signal without pixel conversion. Input Signal The setting is higher than the display resolution of the projector. Auto Direct Real
The setting is lower than the display resolution of the projector.
Video Signals / Component Signals Each press of the ASPECT button advances the selection one step in the sequence of Auto Wide Zoom, and then repeats. Auto. While maintaining the aspect ratio, projects a full screen so that no portions extend beyond the boundaries of the screen. The top and bottom of the 16:9 image becomes black. Wide. Projects to fill the full width with the entire image at 16:9. (This feature is used to project a squeezed image in a proper aspect ratio.) Zoom.. Projects only the 4:3 portion within 16:9 image to fill the screen. (Portion that extend off screen is cut.) Aspect ratio selection Auto Wide Zoom

4:3 screen

16:9 screen
Note: When selection has been made for the Real setting of the personal computer signal (i.e., when the input signal and the projector display resolution are high) and the Zoom setting of the video signal, pressing the SELECT () buttons on the remote control will permit movement of the display position. Note that there will not be any movement when the menu or the quick menu is displayed.
Freezing a Moving Picture
This function is used to stop and view a moving picture. Note that the input image continues to advance even though the picture there is a still picture condition. A press of the FREEZE button changes the screen to a still picture. A further press returns the screen to a moving picture.

FREEZE MUTE ECO

Cancelling Video and Audio Temporarily
This function is used to cancel the video and audio at the same time.
A press of the MUTE button will blank the picture and the sound, and the screen will take on the background color that has been set. Another press will cause a return to the original conditions.

Protecting the Projector with the Security Lock
A password can be registered and the security lock set in order to protect the projector from unauthorized use. Registering the password The password is registered using the menus. For instructions on operating the menus, see Menu Operation Method on E-33.
(1) Select Security Lock in the Option menu and set it to Enable. The menu closes and the password registration display appears.
(2) Use the number buttons (1 to 4) to register the password. Be sure to input a 4-digit number. Example: Registering the password 2441 (1) Press number button 2. An (asterisk) appears at the first place. Next press number buttons 4, 4 and 1 in that order. Asterisks appear in all four places.
(2) Input the password again. An appears when the input number matches. If there is a mistake, the asterisks turn off. Start over from step (1) above. If the password matches, the password registration display closes.
Note: To cancel the number you have input, press the CANCEL button. The asterisks disappear and the display returns to the input standby mode at the first place. To cancel the password registration mode, press the CANCEL button again. The Password display turns off.
This completes password registration. The Password input display appears the next time the power is turned on.
Note: The numbers you have input are not displayed. Be sure to write down the password and store it in a safe place.
If the password input display appears when the power is turned on When a password has been registered, the Password input window appears on the projected image when the power is turned on. The projector continues projecting this image until the correct password is input. At this time, only the STANDBY button (power off) works. Use the procedure described below to input the registered password. For instructions on registering the password, see E-30. Input the password using the number buttons (1 to 4). Be sure to input the registered 4-digit number. Example: To input the password 2441 Press number button 2. An (asterisk) appears at the first place.
Next press number buttons 4, 4 and 1 in that order. Asterisks appear in all four places. If the password matches, the window turns off and the projector can be used normally.

[Password input window]

Canceling the password/Changing the password The password is canceled and changed using the menus. For instructions on operating the menus, see Menu Operation Method on E-33. Canceling the password Select Security Lock in the Option menu and set it to Disable. This clears the password and disables the security lock. The password input display no longer appears when the power is turned on. Changing the password After setting Security Lock to Disable as described above, set it back to Enable. The menu closes and the password registration display appears. Register the new password. See Registering the password on E-30.

Using the Quick Menu

This function permits frequently used adjustments to be performed quickly. Note that the Quick Menu will not be displayed unless the signal of the connected equipment is input. Please select the input that you wish to adjust. Main unit operation (1) Press the QUICK MENU button to display the quick adjustment display. Further presses cause the adjustment display to change in sequence. Press the SELECT or button to switch to the desired adjustment display. (2) Press the SELECT or button to adjust.
(1) Remote control operation (1) A press of the QUICK MENU button brings up the quick adjustment display. Further presses cause the adjustment display to change in sequence. The adjustment display can be selected with use of either the SELECT or button. (2) Press the cursor or button to make the adjustment. (3) To close the display immediately, press the CANCEL button. In the absence of operations for a period of about 10 seconds, the display will close automatically.

(2) (1) (3)

Content of Adjustments and Settings
Example: Brightness adjustment display

Display Item

Adjustment/Setting
Brightness Contrast Keystone Volume Presentation timer Quick Color Adj.
Adjusts the brightness of the image. See page E-40. Adjusts the contrast of the image. See page E-40. Corrects (vertical) keystone distortion of the screen. See page E-27. This function adjusts the volume of the built-in speaker. See page E-27. Sets the time of the presentation timer. See page E-29. Select the preset color mode. See page E-42.

Menu Operation Method

This section describes only the menu operation method. Please see this item should you need information while performing menu operations. For information about a menu function, adjustment, or setting, please see one of the pages containing such descriptions. Adjustments and settings are made by projecting an image and adjusting to an optimum condition. The remote control should be pointed toward the remote control sensor of the projector and operated. To return the various items that have been changed via the menu to their standard values (i.e., default values at time of shipping from the factory), see Factory Default on Page E-52. (Some items will not return to their initial values.) The adjustment/setting items and contents will differ depending on the input selection and the adjustment/setting items that can be used with the input signal are displayed on the menu.

Factory Default

This function returns the adjustments and settings of all the input sources to the standard factory default values. Select item name Factory Default and press the ENTER button. There is a change to the display [Press ENTER to Factory Default Set]. Press the ENTER button to initialize. To cancel, press the CANCEL button and there will be a return to the menu. Items that are not set to the factory default: Vertical Flip / Horizontal Flip, Language and Lamp Timer and Security Lock.

Lamp Timer Reset

This function resets the lamp timer. Be sure to perform the reset operation when the lamp cartridge has been replaced. Select item name Lamp Timer Reset and press the ENTER button. There is a change to the display Press ENTER to Lamp Timer Reset. Press the ENTER button to initialize. To cancel, press the CANCEL button and there will be a return to the menu.

Resolution / Frequency

This function displays the resolution and frequency of the detected input signal.

Lamp Timer

This displays the lamp timer. This projector has an Eco mode function. The lamp life will differ between Normal mode and Eco mode. Lamp Life Use only in Normal mode: approx.2000 hours Use only in Eco mode: approx.2500 hours * Lamp life will differ when there has been switching between the modes. When Lamp Life Has Been Reached Replace the Lamp Cartridge is displayed on the screen for 10 seconds in a 1-minute interval. Please replace the lamp with a new one. See Replacing the Lamp Cartridge on Page E-57 for information about lamp cartridge replacement. When Over 100 Hours Have Elapsed Since Reaching Lamp Life (Including Eco Mode) [Warning!! System Shutdown] is displayed for 10 seconds and the power is switched off. Pressing the STANDBY button under this condition will not switch on the power. Please replace the lamp cartridge.
When an Indicator is Lit or Flashing
The indicators on the projectors control panel light or flash to notify of problems, as described below. An indicator is also used to notify you of the currently set power mode. See Power Cable Connections and Switching the Power On/Off on page E-19.

N E M U

Indicator status
What you should do It is time to replace the lamp. Replace with a new lamp cartridge.
When the power is on (Lit green) Standby (Lit amber) Lit red
Flashing amber for 60 seconds, then lit amber Lit red
The lamp has reached the end of its service life. The power will no longer turn on. The projector can be used for 100 hours after the lamp has reached the end of its service life. Replace with a new lamp cartridge.
Lit red Flashing red (lit for 1 seconds/off for 1 seconds)
The lamp cover is open. The lamp cover is not properly mounted. Mount it properly.
Lit red Flashing red (lit for 0.5 seconds/off for 0.5 seconds)
The temperature is abnormally high. The temperature protector has been activated. If the room temperature is high, move the projector to a cool place. If the projectors internal temperature is high, check the cooling fans ventilation slots and clean them if they are clogged. When the temperature protector is activated, the power turns off and in some cases will not turn back on immediately. In this case wait about 90 seconds, then try again. The fan has stopped. Unplug the power cable and contact a store that sells the V-332 for repairs.

Lit amber Flashing red (lit for 0.5 seconds/off for 0.5 seconds)
When the lamp has burned out during use Flashing amber for 90 seconds, then lit amber When the lamp does not come on from the start Lit amber Flashing red (lit for 1 seconds/off for 1 seconds)
The lamp will not light. Wait at least 90 seconds, then turn the power back on. If the problem persists, unplug the power cable and contact a store that sells the V-332 for repairs.
Should an indicator be in a condition other than normal or flash at a rate other than the aforementioned, disconnect the power cable and contact your store of purchase.

Thermal Protector

When the temperature inside the projector becomes abnormally high, the STATUS indicator flashes red (0.5 seconds on/0.5 seconds off), the STANDBY indicator is a steady red, and at the same time the temperature protector operates and switches off the power of the projector. Should this happen, please take the following actions. 1. Switch off the power and disconnect the power plug from the wall outlet. 2. Check the following matters and take the required measures. When the projector is being used in a location that has a high ambient temperature, set it up again in a cool location. Check the outflow and intake holes and clean them if they are obstructed. 3. Wait about 60 minutes until the temperature of the projector drops. If after having performed the above matters, the problem still has not been solved, please contact your store of purchase.

STANDBY indicator

A T U S T S A N

Troubleshooting

Check the following matters before requesting servicing.
Problem Power does not turn on Check Is the power cord plugged into a power outlet? Is the lamp cover properly mounted? Is the projectors temperature high? To protect the projector, the power cannot be turned on when the projectors temperature is abnormally high. Has the lamp reached the end of its service life? Is a connected input selected? Is the cable properly connected to the input terminal? When a computer is connected, are signals being output from the computer? Does the signal being input have a frequency usable with this projector? Are the brightness and contrast adjusted to the minimum? Is the STATUS indicator lit a steady red or flashing red? When the component signal of the DVD player is connected with the RGB connector and the image is not output, is [Input Settings] of the RGB connector properly selected? For a RGB input, has the picture been properly adjusted? Is the projector properly installed? For trapezoidal (keystone) distortion, perform keystone adjustment. Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion completely. Is the lens properly focused? Are the screen and projector installed at the proper distance? Does the projection distance exceed the focusing range? Is there condensation on the lens, etc.? If the projector is moved from a cool storage area to a warm place and the power is turned on, condensation may form on the lens or internal optical parts. If this happens, wait until the condensation has evaporated before using the projector. Reference Page E-19 E-59 E-54 E-54 E-24 E-E-53 E-61 E-40 E-54 E-49 E-40, 41 E-23 E-27, 46

Dirty Lens

Clean using the same method you would use to clean a camera lens: Use a commercial blower for camera use or cleaning paper for eye glasses. Be careful not to scratch the lens at this time.
Dust of the Intake and Outflow Holes
Dust that collects in the intake and outflow holes will obstruct the ventilation and cause the internal temperature to rise which could cause damage. Clean this area carefully. As a guideline, clean at least every 100 hours of usage. Switch off the power, check that the STANDBY indicator has changed to a steadily lit amber, then unplug the power cable. Clean out the holes from the outside using a vacuum cleaner. Use the brush adapter of the vacuum cleaner to do this. Avoid using the vacuum directly without attaching the adapter as well as the use of a nozzle adapter.
Cleaning the Inside of the Projector
Cleaning of the inside of the projector is required about once a year. Failure to clean over a long period while dust has collected inside the projector could cause a fire or breakdown. Do not clean the inside of the projector by yourself. Please be sure to contact your dealer.

Q ME UIC NU K ST AT U S

ST AN DB Y
Replacing the Lamp Cartridge
The lamp that is used as a light source in the projector has a limited service life. The rated service life of the lamp is about 2000 hours (when used in normal mode only). This could be shortened depending on conditions of use and other factors. Note that lamp life will be extended when the projector is often used in Eco mode. (The rated service life of the lamp means the average value of lamp life for lamps that have been manufactured over a long period, and it is derived from test conditions at this company.) When the life of the lamp is exceeded, the STATUS indicator lights a steady red and the message [Replace the Lamp Cartridge] is displayed on the screen. When this occurs, it is time to replace the lamp cartridge. Please make the replacement following the procedure below. If the projector is used another 100 hours after the lamps service life is reached, the power is set to the standby mode and no longer turns on. Contact a store that sells the V-332 for a replacement lamp. Indicate you need a V-121 replacement lamp for the V-332 (order code 28-056).
Replacement of the lamp cartridge is performed after switching off the power, waiting for the cooling fan to stop, disconnecting the power plug from the power outlet, and then leaving the projector for about 60 minutes before replacement is started. Replacement of the lamp cartridge during operation or immediately after operation stops will cause burns because of the high temperature. Do not remove any screws other than those specified. Do not touch the lamp with bare hands. Doing so could shorten the life of the lamp. If lamp has reached the end of its usable life, the lamp bulb may shatter. When this happens, an explosive sound can be heard and pieces of glass may be scattered in the lamp cartridge. Do not touch them as the pieces of glass may cause injury. If this happens, contact your dealer or the store the projector was purchased.

 

Tags

KX25-KX49-kx61 P350QS Urc-8800 Tsl 60 LSM304V-4 Philips FW91 GMR325-2 CCD-TRV228E Sl Universelle RX-ED50 AJ-D92 Nokia 8890 AR-651 GE-60 Doro 720 SRU9400 Motorola V620 LF-020S 30159 GR-P207tuja PV-S660 GSM708 KX-TG2314 MX-6000 XP200A 5100 Bike EMP-1710 KDL-46HX705 SHR-2162P750 Series 25060 R MF-JM53s8K L100 EB 271 VT-14GH10 W200I Laserjet 4200 AEQ6Q BL-C111 CQ-C1103NE Samsung C100 KX-TCD200SP LN40A450c1D Toptec 2100 AR-5320 KDL-46HX900 LT-42WX70 Dmreh59 ES-762 Series RX-330 XM-754SX KX-TC1701B EX-Z850 Dvdr5520H-31 EB 291 H3850 Rising SUN Review Strav550 MP 203 Argos SAL-55200-2 Citroen Saxo CDX-GT430U Alertegps G50 21 S0 Gigaset E150 Ericsson P900 Racing LM2576 Uk EWW12470W 08MP08 Photo 750 LN32C550 AL-1217 P2B-IDE P5GPL SM-820 DR-BT21G LBP5000 Motorola 2500 CP-X955 V1 00 DN-S5000 ES-8807 Canon A480 HD7612 LE23R32B 40 KW MRD-M500 X-950T Printer Stylus C45 DS6628 KS 54 Foxsat-HD NWZ-X1050 System-2005

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101