Film Data Sheet 690 Instant Pack Film

Description

&RORU ,QVWDQW 3DFN )LOP

[ LQFK [ FP

Medium-speed, medium-contrast, medium-grain, daylight and electronic flash balanced (5500K) color print film. Its easy to use, professional quality instant film, with sharp, bright, well-saturated colors, anytime, every time.

Key Application

Professional photography (proofing or final art) Passport/document photography

Film Speed

ISO 125/DIN 22

Compatible Hardware

Cameras or instruments with CB-103 Back or OEM CB-100 Back (these holders are supplied by medium format camera manufacturers such as Mamiya, Hasselblad, Konica, Pentax, and Bronica) Polaroid Model 405 Film Holder MiniPortrait Cameras, such as M203, M403, and SPd 360.

Special Instructions

Viewing: When evaluating the color balance of a print, use the same light source under which the print is to be viewed as a finished product. Laminating prints: This film is NOT recommended for use with laminates requiring a wet print to produce a photo-destruct bond. Not for use for emulsion lift.

Format

31/4 x 41/4 in. (8.5 x 10.8 cm) Pack Film

Image Area

27/8 x 33/4 in. (7.3 x 9.5 cm)

Alternative Product

Polacolor 669

Finish

Glossy
Processing Information Exposures per Unit
10 exposures per pack Temperature F C 70-105 65-69 61-64 55-60 21-40 18-20 16-17 13-15 Proc. Time

(sec.)

Equivalent Film Speed

(ISO/DIN)

Exposure Adjustment None None None None

Development Time

90 seconds at 70105F (21 40C)

150 180

125/22 125/22 125/22 125/22

Caution

This film uses a small amount of caustic paste. If any paste appears, avoid contact with skin, eyes and mouth and keep away from children and animals. If you get some paste on your skin, wipe it off immediately, then wash with water to avoid an alkali burn. If eye contact occurs, quickly wash the area with plenty of water and see a doctor. Keep discarded materials away from children, animals, clothing and furniture.

Limited Warranty

See information on the film box. Polaroid and Polacolor are trademarks of Polaroid Corporation, Waltham, MA 02451 USA. All other product names may be the property of their respective owners.
Film Data Sheet Technical Data
690 Instant Color Peel-Apart Film
Characteristic H&D Curves for Normal Development The information in this data sheet represents the typical performance of Polaroids 690 color film. Specific film lots may vary.
Recommended speed: ISO/DIN 125/22o Recommended processing time and temperature: 90 seconds at 70o -95o F (21o-35oC) Balance: Daylight and electronic flash (5500oK) Contrast: Medium

Relative Log Exposure

Sample Density
Characteristic H&D Curves for Cold Development
Characteristic H&D Curves for Hot Development

Spectral Sensitivity

Blue Green

Reciprocity Law Failure

Green Red

0.0001"

.001"

.01"

.1"

10"

100"

Wavelength (nm)

Exposure Time (seconds)

Action Sensitivity

Blue Green Red
Reciprocity: The ability of the film to respond in a constant manner to a constant exposure (light intensity x time ). Reciprocity failure occurs during very long or very short exposures, requiring the photographer to increase exposure. Spectral Sensitivity: Shows the equivalent energy needed at each wavelength in order to activate the emulsion dyes so that they produce a neutral density of 0.75. Action Spectra: Shows the films relative sensitivity throughout the visual spectrum.

Log Relative Sensitivity

-1 350

Wavelength

Polacolor T-79, T-579, T-679,T-690,T-879 Instant Color Peel-Apart Films
Intermittency Effect (Multi-Pop)

Polaroid Proof

# of Flashes *Exposure Change none 1 stop 2 stops 3 stops 4 stops **Color Correction

Ektachrome (100Plus)

Exposure Change none none +1/3 + 1/Color Correction none none none cc 5 magenta cc 5 magenta
none cc 5 red cc 10 magenta + 5 yellow cc 15 magenta + 5 yellow cc 25 magenta + 10 yellow
Exposure change from the best Polaroid Proof
** The Polaroid Proof has an increasing green color balance from 4 to 16 flashes. Use the above magenta filtration to subtract green. The recommended filters require the following exposure changes: cc 5m - none, cc 10m + 1/3, and cc 20m + 2/3.

Filter Recommendations

Color Temp ( K)

2800oK

Exposure
1/8 sec 1 sec. 4 sec. 15 sec.

Filtration

80A + 5M 80A + 20M 80A + 30M 80A + 40M 80A 80A + 10M 80A + 20M 80A + 30M

Effective ISO (approx.)

3200 K
1/8 sec. 1 sec. 4 sec. 15 sec.

Film Data Sheet Polacolor T-89 Color Pack Film

Description

3URIHVVLRQDO &RORU 3DFN )LOP

[ LQFK [ FP

Medium-speed, medium-contrast, medium-grain, daylight and electronic flash balanced (5500K) color print film. Its easy to use, professional quality instant film, with sharp, bright, well-saturated colors, anytime, every time.

Key Application

Professional photography (proofing or final art) Passport/document photography

Compatible Hardware

Cameras or instruments with CB-1034 or CB-80 camera backs MiniPortrait Camera models M484, M485b, M486V, and M488V ProPack Camera

Special Instructions

Viewing: When evaluating the color balance of a print, use the same light source under which the print is to be viewed as a finished product. Laminating prints: This film is NOT recommended for use with laminates requiring a wet print to produce a photo-destruct bond.

Film Speed

ISO 125/DIN 22

Format

31/4 x 33/8 in. (8.3 x 8.6 cm) Pack Film

Alternative Product

Image Area
23/4 x 27/8 in. (6.9 x 7.2 cm)

Processing Information

Temperature F C 70-105 65-69 61-64 55-60 21-40 18-20 16-17 13-15 Proc. Time

(sec.)

Equivalent Film Speed

(ISO/DIN)

Exposure Adjustment None None None None

Finish

Glossy

Exposures per Unit

10 exposures per pack

150 180

125/22 125/22 125/22 125/22

Development Time

90 seconds at 70-95F (21-35C)

Caution

This film uses a small amount of caustic paste. If any paste appears, avoid contact with skin, eyes and mouth and keep away from children and animals. If you get some paste on your skin, wipe it off immediately, then wash with water to avoid an alkali burn. If eye contact occurs, quickly wash the area with plenty of water and see a doctor. Keep discarded materials away from children, animals, clothing and furniture.

Limited Warranty

See information on the film box. Polaroid and Polacolor are trademarks of Polaroid Corporation, Waltham, MA 02451 USA. All other product names may be the property of their respective owners.
Film Data Sheet Technical Data
T-89 Instant Color Peel-Apart Film
Characteristic H&D Curves for Normal Development The information in this data sheet represents the typical performance of Polaroids 89 color film. Specific film lots may vary.
Recommended speed: ISO/DIN 125/22o Recommended processing time and temperature: 90 seconds at 70o -95o F (21o-35oC) Balance: Daylight and electronic flash (5500oK) Contrast: Medium

Relative Log Exposure

Sample Density
Characteristic H&D Curves for Cold Development
Characteristic H&D Curves for Hot Development

Spectral Sensitivity

Blue Green

Reciprocity Law Failure

Green Red

0.0001"

.001"

.01"

.1"

10"

100"

Wavelength (nm)

Exposure Time (seconds)

Action Sensitivity

Blue Green Red
Reciprocity: The ability of the film to respond in a constant manner to a constant exposure (light intensity x time ). Reciprocity failure occurs during very long or very short exposures, requiring the photographer to increase exposure. Spectral Sensitivity: Shows the equivalent energy needed at each wavelength in order to activate the emulsion dyes so that they produce a neutral density of 0.75. Action Spectra: Shows the films relative sensitivity throughout the visual spectrum.

Log Relative Sensitivity

-1 350

Wavelength

Polacolor T-79, T-579, T-679, T-690, T-879, T-89 Instant Color Peel-Apart Films
Intermittency Effect (Multi-Pop)

Polaroid Proof

# of Flashes *Exposure Change none 1 stop 2 stops 3 stops 4 stops **Color Correction

Ektachrome (100Plus)

Exposure Change none none +1/3 + 1/Color Correction none none none cc 5 magenta cc 5 magenta
none cc 5 red cc 10 magenta + 5 yellow cc 15 magenta + 5 yellow cc 25 magenta + 10 yellow
Exposure change from the best Polaroid Proof
** The Polaroid Proof has an increasing green color balance from 4 to 16 flashes. Use the above magenta filtration to subtract green. The recommended filters require the following exposure changes: cc 5m - none, cc 10m + 1/3, and cc 20m + 2/3.

Filter Recommendations

Color Temp ( K)

2800oK

Exposure
1/8 sec 1 sec. 4 sec. 15 sec.

Filtration

80A + 5M 80A + 20M 80A + 30M 80A + 40M 80A 80A + 10M 80A + 20M 80A + 30M

Effective ISO (approx.)

3200 K
1/8 sec. 1 sec. 4 sec. 15 sec.