7 Two Screen Car Portable DVD Player PDM-2727M

Users Manual

20060628
Important Safety Instructions
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE.
CAUTION: Laser radiation when open. Do not stare into beam.
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. POWER SUPPLY: Connect the supplied adapter to the side of the DVD player in the slot marked Power In. Plug the two-prong end of the power cord to an AC100-120V outlet. If you have difficulty inserting the plug, turn it over and reinsert it, if the unit will not the used for a long time, disconnect the plug from the outlet. NOTE: Before plugging the power cord into an AC outlet, make sure that all the connections have been made.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer to service manual for servicing instructions. 1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use near water. Clean only with dry cloth. Do not block any ventilation openings. Maintain well ventilated conditions around the product, Do not put product on bed, sofa or anything that blocks ventilation. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

10) 11) 12)

13) 14)
Note: Do not touch the color TFT LCD screen by hand directly.
Copyright Protection This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT 2. DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit. Leave all servicing to qualified service personnel. Region code information DVD players and discs are coded by region. If the region number described on the DVD disc does not correspond to the region number of this product, this product cannot play the disc. The region code of this unit is 4.

Features

High-quality audio and video
Excellent sound: Dolby Decoder delivers great sound. AV Out: Analog audio output and video output.
Advanced Playing Functions
Compatibility: Compatible DVD, CD and JPEG. with On-screen Display: You can choose English, French or Spanish for the On-screen Display language.
Particular Performance: Multi-speed, fast forward, fast backward and slow forward.
Search by Time: Search for a certain track of a disk by selected time.
Last Memory Playback: Memorizes the stopped playback track and continues playing the disk from this spot when the power is kept to supply. (Only available for DVD and CD disc).
Special Functions: Supports screen aspect ratio changing, screen saver, multi-languages subtitle, multi-angles etc. functions.

Accessories

Accessories List ITEM NAME
Remote Controlwith battery

Power Adapter

Car Adapter

Power Supply Cord

Earphone Game handle

Audio/Video Cable

Owners Manual
Accessories and their parts numbers are subject to modification without prior notice due to improvements.

Contents

Important Safety Instructions Features Accessories View of Front Panel View of Side Panels View of Main Unit Bottom View of Remote Control Battery Installation for RC System Connections Power Supply Preparation Notes on Discs Playback Operation DVD Playback CD Playback JPEG Playback System Setup Use of Straps Definitions Troubleshooting Specifications
.1.4.5.7.9.11.12.14.15.17.18.19.20.24.26.28.32.34.35.37

View of Front Panel

(PLAY/PAUSE) button Press once to pause the playback, and press it again to resume the playback. (Stop) button Press to stop playback. Then press the button to resume playback from the stopped spot. Press this button twice to stop playback completely.

3. 4. 5. 6.

SLOW button Press to activate the slow playback function. A-B Repeat button Press to play a certain selected segment repeatedly. TITLE button Press to access to or exit from the title menu if it exists in the disc. MENU button Press to access to or exit from the menu.
7. 8. 9. 10. 11. 12. 13. / / / / button button button button
Press to select different options, or to return to the previous list, track or chapter. Press to select different options, or to search forward fast. Press to select different options, or to search backward fast. Press to select different options, or to skip to the next list, track or chapter. Setup button Press to enter the players system setup. ENT button Press to access playback, or confirm your selection. AUDIO button Press to select different languages when a DVD disc which contains multiple audio languages is played. Press to select different audio track when a CD disc is played. 14. 15. -/+ button Press to adjust the value of brightness and color. FUNC button Press the FUNC button to change the brightness and color level. Press and hold for 1-2 seconds to change the aspect ratio. 16. Speaker 17. Remote Control Sensor 18. LCD Screen

View of Side Panels

Right Side View

3. 4. 5. 6. 7.

Volume Control Used to adjust the volume of the headphone and speaker. Headphone Jack Used to connect headphones for private listening. When the headphones are connected to this jack, the speaker will be turned off automatically. Audio Output Jack Used to connect to an external amplifier. Video Output Jack Used to connect to an external monitor. DC 9.5V Input Jack Used to connect the power adapter, including the car adapter. OPEN Switch Push to open the disc tray cover. Disc tray cover When the disc is loaded gently press the cover to close it.

Left Side View

Headphone Jack Used to connect headphones for private listening. When the headphones are connected to this jack, the speaker will be turned off automatically.
Power Switch Used to turn the power on or off.

View of Main Unit Bottom

Rechargeable Battery Contacts For connecting the rechargeable battery pack.

View of Remote Control

MUTE button Press to turn off or on the speaker output. INFO button Press repeatedly to display or conceal the detailed information of the disc during playback. TITLE button Press to access to or exit from the title menu if it exists in the disc. Direction button Press to select different options. ENTER button Press to access playback or confirm your selection. SETUP button Press to enter the players setup menu. 0-9 number buttons Press to select number.

8. 9. 10.

13. 14. 15. 16. 17.

18. 19.

20. 21. 22. 23. 24.
NEXT button Press to skip to the next list, track or chapter. PREV button Press to return to the previous list, track or chapter. SUBT button When playing a DVD coded with multi-subtitles, press to select a subtitle language or to turn subtitles off. ANGLE button Press to access various camera angles if the DVD disc contains multiple camera angles. A-B button Press to play a section of the disc from point A to point B. Press once to select the starting point A, press again to select the end point B. During A-B repeat playback, press this button to stop the repeat. ZOOM button Press to realize various zoom functions. REP button Press to repeat a chapter, title, the entire disc or close this function. MENU button Press to access to or exit from the menu during playback. PAUSE button Press to pause playback. Press the PLAY button to resume normal playback. STOP button Press to stop playback. Then press the PLAY button to resume playback from the stopped spot. Press this button twice to stop playback completely. PLAY button Press to start playback. +10 button Press this button first and then the additional number buttons as needed to select number greater than 9. GOTO button Press to select the desired title, chapter or playback start time. REV SCAN button Press to search backward fast during playback. FWD SCAN button Press to search forward fast during playback. SLOW button Press to activate slow playback function. AUDIO button Press to select different languages when a DVD disc with multiple audio languages is played. Press to select different audio track when a CD disc is played.

Battery Installation for Remote Control

Installation Steps

Follow the steps below to install the battery.
Step1: Pull the battery holder out from the remote control in the direction of the arrow.
Step 2: Load a new battery properly with the (+) side up.
Step3: Insert the battery holder back into the remote control.

Battery Property

Battery Type: CR2025 3V Battery Life: Approximately 1 year under normal use (at room temperature).

Caution

1. 2. 3. 4. 5. Improper use of the battery may cause overheating, explosion or ignition, which can result in an injury or fire. Battery leakage may damage the remote control. Do not expose the remote control unit to direct sunlight. Do not recharge, disassemble, deform or heat the battery. Do not put the battery in fire or water. Immediately replace the exhausted battery.

System Connections

Always ensure that the DVD player, TV and any other electrical equipment to be connected with are switched off and unplugged from the power supply. Ensure that you observe the color coding when connecting audio and video cables.

Connecting to TV

Audio/Video connections Follow the drawings below to connect the DVD player to TV's Audio/Video inputs with Audio/Video cables.

Connecting to Amplifier

Refer to your Audio equipment's manual before connection. Follow the drawings below to connect the DVD player to AV amplifier.

Connecting to Headphones

Connect the headphones to the right side of the player for private listening.
When headphone is connected, the speakers will automatically turn off.

Power Supply Preparation

Using the AC Adapter
The player is supplied with an AC adapter for powering the unit and charging the battery.
Connect AC adapter to the right side of the DVD player in the jack marked DC 9.5V IN, as shown on the right. Plug the other end of the power cord into the wall AC outlet.
NOTE: Turn player's power off before unplugging.

Using of Car Adapter

The player is supplied with a Car Adapter for powering the unit while in a vehicle.
Connect the Car Adapter Power Plug to the units power jack and plug the other end to the vehicles cigarette socket, as shown right.

Attention

Do not operate the unit or view video software while driving a vehicle. Place the unit in a proper position for viewing. Disconnect the player from the Car Adapter when starting the vehicle.

Notes on Discs

Compatible Disc Formats
DISC LOGO DIAMETER PLAYBACK TIME/ PLAYABLE SIDES 133 min (SS-SL) 242 min (SS-DL) 266 min (DS-SL) 484 min (DS-DL) 41 min (SS-SL) 75 min (SS-DL) 82 min (DS-SL) 150 min (DS-DL) 74 min 20 min

12cm DVD 8cm

12cm CD 8cm JPEG 12cm
Operation methods of some DVD discs are specified by the software manufacturer. Please follow the instructions of those discs.

Care of Discs

Holding Discs
When loading or removing discs, do not touch their playing surfaces as the right figure.

Cleaning

Fingerprints or stain on the disc may affect the quality of sound and picture. To clean your discs, use a soft clean cloth to wipe them. If necessary, moisten a soft cloth with diluted neutral detergent to remove heave dirt or fingerprints.
Do not wipe in a circular direction as the figure in the right middle (concentric scratches on the disc groove tend to cause noise). Gently wipe from the center of the disc to the outer edge as the right figure.

Playback Operation

READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING YOUR DVD PLAYER FOR THE FIRST TIME. WARNING: Do not play poor-quality discs to avoid damaging the lens.

Pre-operation

1. Connect the unit to power supply through the provided AC adaptor. 2. Switch POWER ON/OFF to ON on the left panel to turn on the DVD player. 3. Press OPEN button on the unit to open the disc tray cover, put a disc in the disc tray with printed side facing up. Close the disc cover. (See below)
4. The player will read the disc automatically. 5. Adjust the volume with the VOLUME control on the right panel to the desired level. 6. To turn the player off, switch the POWER ON/OFF on the left panel to OFF.

Using of General Button

FUNC button
Press the FUNC button to change the brightness and color level. Adjust these values with + and - buttons on the front panel. Press and hold the FUNC button for about 1 or 2 seconds to change the aspect ration between 16:9 and 4:3. See the below for details:

DVD Playback

Buttons Operation

ENTER/ENT button

Press the ENTER/ENT button to start playback; press the direction buttons to select a title/chapter to play or use 0-9 buttons to select directly.

PAUSE/ button

Press the PAUSE/
button to pause playback or start step frame by frame playback, and press the PLAY/
button to resume normal playback.

STOP/ button

During playback, press the Stop/ button once to stop playing, then press the PLAY/ button to resume normal playback from the stopped point. Press the STOP/ button twice repeatedly to stop playback completely. Then press the PLAY/ button and the player will play from the beginning.

ZOOM button

Press the ZOOM button repeatedly to shift among 1X, 2X, 3X zooming effects and normal playback.

A-B Button

Press the A-B button once to set the starting point A, press it again to set the end point B. Then the player will play the segment between A and B continuously. Press this button a third time to stop the A-B repeat.

DVD Playback (continued)

TITLE button
Press the TITLE button during playback. The title menu will appear on the screen. Press the direction buttons to select the title/chapter to play, and press the ENTER/ENT button to confirm your selection. Or press the 0-9 buttons to select directly.

MENU button

Press the MENU button during playback. The root menu will appear on the screen. Press the direction buttons to select the title/chapter to play, and press the ENTER/ENT button to confirm your selection. Or press the 0-9 buttons to select directly.

buttons

Press the Press the
button to go to the previous chapter. button to play the next chapter.
Press the button to start fast forward playback. Press it repeatedly to fast forward at the speed of 2X, 4X, 8X, 16X and normal playback in sequence. Press the button to fast backward. Press it repeatedly to fast backward at the speed of 2X, 4X, 8X, 16X and normal playback in sequence. Press the PLAY/ button to resume normal playback.
Press the SLOW button repeatedly, and the slow playback will be undergoing at the speed of 1/2, 1/4, 1/6, 1/8 and normal playback in sequence. Press the PLAY/ button to resume normal playback during slow playback.

SLOW button

INFO button
Press the INFO button to display or conceal the detailed information.

AUDIO button

DVD discs can contain up to 8 audio bit streams. For example: English, French etc. To select the audio bit stream you prefer, press the AUDIO button during playback. The DVD player will play the next audio bit stream if exists every time you press the AUDIO button in succession. NOTE: This function is available for DVD discs recorded multi-audio languages.
When a DVD disc is playing, press the SUBT button to select a subtitle language or to turn the subtitle off. A DVD disc can be recorded with up to 32 subtitles. Press the SUBT button repeatedly, the mode of subtitles will recycle as follows:

SUBT button

SUBTITLE 1/N: Subtitle 1 appears on the screen. SUBTITLE 2/N: Subtitle 2 appears on the screen. SUBTITLE */N: Subtitle * appears on the screen SUBTITLE OFF: No subtitle. N refers to the total number of subtitles that the current disc contains.
NOTE: This function is available for DVD discs recorded with multi-subtitles
Press the REP button to repeat a Chapter, Title or cancel the repeat in sequence.

REP button

Press the ANGLE button to play the disc in multi-angle. Multi-angle means that a scene is shot from different angle so that audience can watch from any angle, like the drawings below:

ANGLE button

If there are multiple angles in a scene, you can use the ANGLE button to select the angle you like to enjoy. Press the ANGLE button repeatedly to view from different angle. NOTE: This function is only available for the DVD disc that coded with multi-angles.

GOTO button

Press the GOTO button to select desired disc title, chapter or time. Use the direction buttons to highlight Title, Chapter or Time. Use the 0-9 number buttons to input numbers of the desired title, chapter or time and press the ENTER/ENT button to confirm. Then the player will begin playing from the selected title, chapter or time. Press the button again to cancel the item.

CD Playback

When a CD disc is loaded, the player will read the disc. Then a playback menu will appear on the screen and the player will play the disc automatically by the default sequence of the disc. You can use the buttons to select the desired track. Or press the number buttons to input the number of the desired track first and then press the ENTER/ENT button to confirm to play.
Press the PAUSE/ button to pause during playback, and press the PLAY/ button to resume normal playback.
During playback, press the Stop/ button once to stop playing and press the PLAY/ button to resume normal playback from the stopped point. Press the STOP/ button twice repeatedly to stop playback completely. Then press the PLAY/ button and the player will play from the beginning.
Press the button to start fast forward playback. Press it repeatedly to fast forward at the speed of 2X, 4X, 8X, 16X and normal playback in sequence. Press the button to fast backward. Press it repeatedly to fast backward at the speed of 2X, 4X, 8X, 16X and normal playback in sequence. Press the PLAY/ button to resume normal playback during fast playback.

CD Playback (continued)

Press the REP button to repeat signal, folder or cancel the repeat in sequence.
Press the GOTO button to select desired track, track time or disc time. Use the direction buttons to highlight Track, Time or Disc Time. Use the 0-9 number buttons to input the desired numbers of track or time. And press the ENTER/ENT button to confirm. Then the player will begin playing from the selected track or time. Press it repeatedly to cancel the item.
Press the AUDIO button to select desired sound effect. Press it repeatedly, the display will be as follows: Left Right Mix Stereo

JPEG Playback

1. 2. Load a JPEG in the disc tray, the player will read the disc automatically. The screen displays the root folder with several subdirectories/subfolders. Press the ENTER/ENT button to enter. Use the buttons to select a desired folder and press the ENTER/ENT button to confirm your selection. The screen enters the selected subfolder with several pictures. Press the buttons to select the desired picture and press the ENTER/ENT button to enter the playback. Press the buttons to highlight , then press the ENTER/ENT button to return to the last folder or directory.
NOTE: Many discs have other items besides pictures. Filter and Repeat setup
Under the folder mode, press the direction buttons to highlight Filter and you can change its settings according to the steps below: 1. Press the ENTER/ENT button to enter the setup menu. 2. Press the button to select the item you want to set. 3. Press the ENTER/ENT button to select or cancel. 4. Press the button to exit. Under the folder mode, press the direction buttons to highlight Repeat and press ENTER/ENT button repeatedly to change its setting. You can also press the REP button on the remote control to change its setting.

Button Operation

Press the Stop/ button to return to the folder during playback. Press the PLAY/ button to return to normal playback.
Press the PAUSE/ button to pause during playback, and then press the PLAY/ button to resume normal playback.
JPEG Playback (continued)
During playback, press the button to go to the previous picture; press the button to go to the next picture.
Press the REP button to repeat single, folder or cancel the repeat in sequence.

Picture Rotate

During browsing a picture, you can use the direction buttons to rotate the current picture. f Press the button to rotate the current picture 90 clockwise, as shown below:

Press the

button to rotate the current picture 180 clockwise, as shown below:
button to rotate the current picture 270 clockwise, as shown below:

System Setup

You can change the default settings of this unit to customize its performance to your own preference. Read this section to learn how to set up the system. Follow the steps below to set up your system: 1. Press the SETUP button and the setup menu will appear on the screen. 2. Press the buttons to select a sub-menu that you want to set up and press the button to enter the menu.
Press the button to return to the previous menu. Or press the SETUP button again at any time during the setting to exit from the setup menu.

Language setup

Press the SETUP button and press the buttons to select Language. The screen will display as shown left.
1. OSD language This item is used to set the OSD (on-screen display) language. Press the buttons to highlight this item. Press the ENTER/ENT or button to enter the setup of this item. There are several languages for you to choose. Press the buttons to choose the proper one. Press the ENTER/ENT button to confirm your selection and return.
Language setup (continued)
2. Subtitle This item is used to set the subtitle language. Press the buttons to highlight this item. Press the ENTER/ENT or button to enter the setup of this item. There are several items for you to choose. Press the buttons to choose the proper one. Press the ENTER/ENT button to confirm your selection and return.
3. Audio This item is used to set the audio output language. Press the buttons to highlight this item. Press the ENTER/ENT or button to enter the setup of this item. There are several languages for you to choose. Press the buttons to choose the proper one. Press the ENTER/ENT button to confirm your selection and return.

4. DVD menu This item is used to set the disc menu language. Press the buttons to highlight this item. Press the ENTER/ENT or button to enter the setup of this item. There are several languages for you to choose. Press the buttons to choose the proper one. Press the ENTER/ENT button to confirm your selection and return.

Video setup

Press the SETUP button and press the buttons to select Video. The screen will display as shown left.
1. Aspect Ratio This item is used to set aspect ratio. Press the buttons to highlight this item. Press the ENTER/ENT or button to enter the setup of this item. Press the buttons to choose 4:3 or 16:9. Press the ENTER/ENT button to confirm your selection and return. NOTE: Select 4:3 when a 4:3 TV is connected. Select 16:9 when a 16:9 wide screen TV is connected.
2. View Mode This item is used to set the video mode of the unit screen display. Press the buttons to highlight this item. Press the ENTER/ENT or button to enter the setup of this item. There are several items for you to choose. Press the buttons to choose the proper one. Press the ENTER/ENT button to confirm your selection and return.

Misc setup

Press the SETUP button and press the buttons to select Misc. The screen will display as shown left.
1. Use Default Settings This item is used to reset the unit to the default. Press the buttons to highlight this item. button to enter the Press the ENTER/ENT or setup of this item. Use the buttons to choose Yes or No and press the ENTER/ENT button to confirm Choose Yes, all the setting of the unit will return to the default status; choose No, it will return.
2. Screen saver This item is used to set screen saver On or Off. Press the buttons to highlight this item. Press the ENTER/ENT or button to enter the setup of this item. Press the buttons to choose On or Off. Press the ENTER/ENT button to confirm your selection and return.

Usage of straps

Follow the steps below to fix the DVD Player onto the of a car seat headrest. 1. 2. 3. 4. Place the DVD player on a soft and smooth surface with the bottom facing up. Loose the strap and remove the buckle from the strap. Insert the strap through the holes as the Fig.1. Make sure the inside of the strap faces up. Thread the strap into the buckle as Fig.2 and Fig.3. After threading, make sure the outside of the buckle faces up.

5. 6. 7.

Repeat these steps for the other strap. Adjust the length of the strap according to the backrest of the seat. Fasten the straps on the headrest of the seat as in Fig.4. Make sure the two straps are between the headrest support rods (if your car has them).
The drawings show the outside and the inside of the buckle and the strap.

Definitions

Letterbox screen
This refers to a screen on which the playback picture of wide-screen DVDs appears with black bands running along the top and bottom.

Pan & Scan screen This refers to a screen on which the playback picture of wide-screen DVDs is cut off at the left and right sides. Title, Chapter (DVD)
DVDs are divided into some large sections (titles) or some small sections (chapters). Each section is numbered: these numbers are called "Title number" or "Chapter number". Title 1 Title 2 Chapter1 Chapter 1 Chapter2

Track (CD)

CDs are divided into some sections (tracks). Each section is numbered; these numbers are called "Track number". Track 1 Track 2 Track 3
JPEG is a common picture format that has small file size and low quality loss rate of picture. Hundreds of pictures can be stored in a disc in this format. In order to utilize real digital album, use film to make a "PICTURE CD" in JPEG format.

Troubleshooting

Take steps described in the tables below to solve simple problems before contacting after-sales service. If You Suspect Something Wrong, immediately turn the power off. Disconnect the power connector and check that there is neither smoke nor heat from the unit before asking for repairs. Never try to repair the unit by yourself because it is dangerous to do so. PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The disc cover may not be closed. There may not be any discs in the DVD drive. The disc may not be put in with the right way. The disc may be dirty or warped. The player's region code may not as the same as the region code of DVD disc. There may be water on the lens.
Close the disc cover. Put a disc in to the DVD drive. Put the disc in with the label side up. Clean or change the disc. Make sure the player's region code is the same as the region code of DVD disc. Remove the disc and keep the player being powered off for at least two hours.

The player cannot play.

The system connection may be not correct. The speaker may not be turned on. The sound setup of the DVD disc may be not correct. The disc may be dirty or warped.

Connect correctly.

system
Turn on the speaker. Setup the sound of the DVD correctly. Clean or change the disc.

There is no sound

PROBLEM POSSIBLE CAUSE
The LCD may be off or not be in correct video mode. There is no picture. The system connection may be not correct. The unit may be not in AV out mode.

POSSIBLE SOLUTION

Turn on the LCD and choose the correct video mode. Connect correctly. the system
Switch AV tab on the bottom of the unit to out.

Poor AV performance.

The disc may be dirty or warped.
Clean or change the disc.
There may be some obstructions between the remote control and the player. The remote control may not be pointed at the player. The batteries of remote control may not be inserted correctly. The batteries of remote control may be out of power or weak.
Remove the obstruction between the remote control and the player.
The remote control does not work
Point the remote control at the player directly. Make sure the polarity of each battery is correct. Replace the batteries.

Other possibilities:

Static or other external interference may cause the player function abnormally. In order to recover normal status, unplug the power-supply cord and then plug it into the outlet again to reset the player. If the problems still exist, cut off the power supply and consult your service center or the qualified technician.

Specifications

TFT screen size Laser Wavelength Video System Frequency Response Audio Signal-to-noise Rate Audio distortion+noise Channel Separation Dynamic Range Audio Out Video Out Power Power Consumption Dimensions Weight Analog Audio Out Video Out 7 inches 780/650 nm NTSC 20Hz20kHz 85dB 70dB (1kHz) 70dB (1kHz) 80dB (1kHz) Output Level: 1.5V1.0 , Load: 10K Output Level: 1VP-P0.2, Load: 75 Unbalanced Negative AC 120V < 25W 230mmX154mmX40mm (L*W*D) About 0.85kg
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. 1992 -1997 Dolby Laboratories, Inc. All rights reserved.
For service, support and warranty information, visit www.polaroid.com. "Polaroid" and Polaroid and Pixel are trademarks of Polaroid Corporation, Waltham, MA, USA.

7 Portable DVD Player PDM-2727
Important Safety Instructions
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: Laser radiation when open. Do not stare into beam.
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. POWER SUPPLY: Connect the supplied adapter to the side of the DVD player in the slot marked Power In. Plug the two-prong end of the power cord to an AC100-120V outlet. If you have difficulty inserting the plug, turn it over and reinsert it, if the unit will not the used for a long time, disconnect the plug from the outlet. NOTE: Before plugging the power cord into an AC outlet, make sure that all the connections have been made.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer to service manual for servicing instructions. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use near water. Clean only with dry cloth. Do not block any ventilation openings. Maintain well ventilated conditions around the product, Do not put product on bed, sofa or anything that blocks ventilation. Install in accordance with the manufacturers instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Note: Do not touch the color TFT LCD screen by hand directly.

1) 2) 3) 4) 5) 6) 7)

Copyright Protection This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
1. CLASS 1 LASER PRODUCT 2. DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit. Leave all servicing to qualified service personnel. This unit complies with FDA regulation for radiation control of laser products.
IMPORTANT FOR LASER PRODUCTS
Region code information: DVD players and discs are coded by region. If the Region number described on the DVD disc does not correspond to the Region number of this product, this product cannot play the disc. The region code of this unit is 1.

Features

Advanced Playing Functions
Compatibility: Compatible DVD, CD and Picture CD. with Performance: Multi-speed, fast forward, fast backward and slow forward.
On-screen Display: Choose from English, Spanish, French, German or Italian for the On-screen Display language.
Last Memory Playback: This unit will memorize where you stopped playback and continue playing the disk from that spot when power is restored (as long as the disc tray is not opened).
Search by Time: Search for a certain track of a disk by selected time.
Special Functions: Change screen aspect ratio, languages, and multi-angles.

Other Special Functions

High Resolution: MPEG-2 decoding format achieves more than 500 lines of horizontal resolution. Power Adapter Switch: Automatically adapts to voltage requirements in U.S.

Accessories

Remote Control (& battery)
Owners Manual Audio/Video Cable

Power Adapter Car Adapter Power Supply Cord

Earphone Game Controller

Accessories and their parts numbers are subject to modification without prior notice due to improvements.

Contents

Safety Instructions Features Accessories View of Front Panel View of Side Panels View of Main Unit Bottom Remote Control System Connections Power Supply Preparation Notes on Discs Playback Operation
.2.5.6.8.10.12.13.16.18.19.20.21.25.27.29.33.35.36.38
DVD Playback CD Playback Picture CD Playback
System Setup Use of Straps Definitions Troubleshooting Specifications

View of Front Panel

(PLAY/PAUSE) button
Press once to pause playback; press again to resume the playback. (Stop) button Press to stop playback. Press button to resume playback from the stopped spot. Press twice to stop playback completely.

3. 4. 5. 6.

SLOW button Press to activate slow playback function. A-B Repeat button Press to play a certain selected segment repeatedly. TITLE button Press to display the title menu if it exists in the disc. MENU button Press to display or cancel the menu.

7. / button

Press to select different options, or to return to the previous list or the previous track or chapter. 8. 9. / / button button button Press to select different options, or to search forward fast. Press to select different options, or to search backward fast. 10. / Press to select different options, or to skip to the next list, track or chapter. 11. Setup button Press to enter the players system setup. 12. ENT button Press to access playback, or confirm your selection. 13. AUDIO button Press to select different language (depends on availability on your disc). Press to select different audio track when a CD disc is played. 14. -/+ button Press to adjust the value of brightness and color. 15. FUNC button Press to change the brightness and color level; press and hold for 1-2 seconds to change the aspect ratio. 16. Speaker 17. Remote Control Sensor 18. LCD Screen

View of Side Panels

Right Side View

1. 2. 3. 4. 5. 6. 7.

Volume Control Use to adjust the volume of the headphone and speaker. Headphone Jack Use to connect headphones for private listening. When headphones are connected to this jack, the speaker will be turned off automatically. Audio Output Jack Used for audio output. Video Output Jack Use for connecting to an external monitor. DC 9.5V Input Jack Used to connect the power adapter, including the car adapter. OPEN Switch Push to open the disc tray cover. Disc tray cover When the disc is loaded gently press the cover to close it.

Left Side View

Headphone Jack Use to connect headphones for private listening. When headphones are connected to this jack, the speaker will be turned off automatically. 2. Power Switch Used to turn power on or off.

View of Main Unit Bottom

Rechargeable Battery Contacts For connecting the rechargeable battery pack.

Remote Control

1. 2. 3. 4. 5. 6.
MUTE Button Press to turn on/off the speaker output. INFO Button Press to display the detailed information of the disc during playing. Press this button again to exit from the information display. TITLE Button Press to display title menu if it exists in the disc. Direction Button Press to select different options. ENTER Button Press to access playback, or confirm your selection. SETUP Button Press to enter the players system setup.
7. 8. 9. 10. 11. 12. 0-9 Number Buttons Press to select an option in the menu. PREV Button Press to return to the previous list or the previous track or chapter. If it is a DVD disc, it needs to press this button twice to return to the previous track. NEXT Button Press to skip to the next list, track or chapter. SUBT Button Press to select different subtitle languages if there are multiple subtitle languages existing in the disc. ANGLE Button Press to access various camera angles if the DVD disc contains multiple camera angles. A-B Button Press to play a section of the disc from point A to point B. Press once to select the starting point (A), press again to select the end point (B). In A-B repeat playback, press this button to stop the repeat. ZOOM Button Press to enter and cycle through zoom functions, use the direction buttons ( ) to move around the screen. REP Button Press to repeat a chapter, track, title, or the entire disc. MENU Button Display the actual DVD Disc Menu on screen in play mode. PAUSE Button Press to pause playback. STOP Button Press to stop playback. Then press the PLAY button to resume playback from the stopped spot. Press this button twice to stop playback completely. PLAY Button Press to begin to play. GOTO Button Press to select the desired disc starting time, track or title. +10 Button Press this button and the additional number buttons to select item numbers which are greater than 9. FWD SCAN Button Press to search forward fast. REV SCAN Button Press to search backward fast. SLOW Button Press to activate slow playback function. AUDIO Button Press to select different languages when a DVD disc which contains multiple audio languages is played. Press to select different audio track when a CD disc is played.

13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24.

Installation Steps

Follow the steps below to install the battery. Step1: Pull the battery holder out from the remote control in the direction of the arrow.
Step 2: Load a new battery properly with the (+) sided up.
Step3: Insert the battery holder back into the original position.

Battery Property

Battery Type: CR2025 3V Battery Life: Approximately 1 year under normal use (at room temperature).

Caution

1. Improper use of the battery may cause overheating, explosion or ignition, which can result in an injury or a fire. Battery leakage may damage the remote control. 2. Do not expose the remote control unit to direct sunlight. 3. Do not recharge, disassemble, deform or heat the battery. 4. Do not put the battery in fire or water. 5. Replace an exhausted battery immediately.

System Connections

Always ensure that the DVD player, TV and any other electrical equipment to be connected with are switched off and unplugged from the power supply. Ensure that you observe the color coding when connecting audio and video cables.

Connecting to TV

Audio/Video connections Follow the drawings below to connect the DVD player to TV's Audio/Video inputs with Audio/Video cables.

Connecting to Amplifier

Refer to your Audio equipment's manual before connection. Follow the drawings below to connect the DVD player to AV amplifier.

Connecting to Headphones

Connect the headphones to the right side of the player for private listening.
When headphone is connected, the speakers will automatically turn off.

Power Supply Preparation

Using the AC Adapter
The player is supplied with an AC adapter for powering the unit and charging the battery. 1. Connect AC adapter to the right side of the DVD player in the jack marked DC 9.5V IN, as shown on the right. Plug the two-prong end of the power cord into a grounded electrical outlet.
Note: Turn player's power off before unplugging.

Using of Car Adapter

The player is supplied with a Car Adapter for powering the unit while in a vehicle.
Connect the Car Adapter Power Plug to the units power jack and plug the other end to the vehicles cigarette socket, as shown on the right figure.

Attention

Do not operate the unit or view video software while driving a vehicle. Place the unit in a proper position for viewing. Disconnect the player from the Car Adapter when starting the vehicle.

Notes on Discs

Compatible Disc Formats
DISC LOGO DIAMETER PLAYBACK TIME/ PLAYABLE SIDES 3 mi n ( SS- SL ) 242 min (SS-DL) 266 min (DS-SL) 484 min (DS-DL) 41 min (SS-SL) 75 min (SS-DL) 82 min (DS-SL) 150 min (DS-DL) 74 min 20 min

Pause/ button

Press PAUSE button to pause during playback, then press PLAY button to resume normal playback.
Press button to pause during play, then press it again to resume normal play.

button

During playback, press STOP button once to stop playing, then press PLAY button to resume normal playback from the stopped point. Press STOP button twice repeatedly to stop playback completely. Then when you press PLAY button, the player will play from the beginning.
During playback, press button once to stop playing, then press button to resume normal playback from the stopped point. Press it twice repeatedly to stop playback completely. Then button, the press player will play from the beginning.

Zoom button

Press ZOOM button repeatedly to shift among 1X, 2X, 3X, 4X zooming effect and normal playback.

A-B Button

Press A-B button once to set the starting point A, press it again to set the end point B. Then the player will play the segment between A and B continuously. Press this button a third time to stop the A-B repeat.

DVD Playback (continued)

Press TITLE button during play. The title menu will appear on the screen. Press (direction buttons) to select the title or disc menu item you wish to play, then press ENTER button to confirm your selection. Or press 0-9 buttons to select the item you prefer directly.

TITLE button

MENU button
Press MENU button during play. The root menu will appear on the screen. Press (direction buttons) to select the item you wish to play, then press ENTER button to confirm your selection. Or press 0-9 buttons to select the item you prefer directly.

buttons

Press button to go to the beginning of the previous chapter. Press button to play the next chapter.
Press the button to start fast forward playback. Press it repeatedly to fast forward at the speed of 2X, 4X, 8X, 16X and normal playback in sequence. Press the button to fast reverse. Press it repeatedly to fast reverse at the speed of 2X, 4X, 8X, 16X and normal playback in sequence. Press the PLAY button to resume normal playback.

SLOW button

Press SLOW button repeatedly, the slow playback will be under going at the speed of 1/2, 1/4, 1/8, 1/16 and normal playback in sequence. Press the PLAY button to resume normal playback.
Press INFO button repeatedly for different detailed information about the disc during the disc playback and to cancel the information.

INFO button

AUDIO button
DVD discs can contain up to 8 audio bit streams. For example: English, French etc. To select the audio bit stream you prefer, press AUDIO button during playback. The DVD player will play the next audio bit stream if exists every time you press AUDIO button in succession. NOTE: This function is available for DVD discs recorded with multi-audio languages.

SUBT button

When a DVD disc is playing, press SUBT button to select a subtitle language or to turn the subtitle off. A DVD disc can be recorded with up to 32 subtitles. Press SUBT button repeatedly, the mode of subtitles will recycle as follows:
SUBTITLE 1/N: Subtitle 1 appears on the screen. SUBTITLE 2/N: Subtitle 2 appears on the screen. SUBTITLE */N: Subtitle * appears on the screen SUBTITLE OFF: No subtitle. N refers to the total number of subtitles that the current disc contains.
NOTE: This function is available for DVD discs recorded with multi-subtitles

REP button

Press REP button to repeat a Chapter, Title or cancel the repeat in sequence.
Press ANGLE button to play the disc in multi-angle. Multi-angle means that a scene is shot from different angle so that audience can watch from any angle, like the drawings below:

ANGLE button

If there are multiple angles in a scene, you can use the ANGLE button to select the angle you like to enjoy. Press the ANGLE button repeatedly to view from different angle. NOTE: This function is only available for the DVD disc that coded with multi-angles.

GOTO button

Press GOTO button to select desired disc title, chapter or time. Use or direction button to move the blue bar to TITLE, CHAPTER or TIME. Use 0-9 number buttons to enter the desired title, chapter or time directly. And press ENTER button to confirm. Then the player will begin playing from the selected title, chapter or time. Press it repeatedly to cancel the item.

CD Playback

When a CD disc is loaded, the player will play it automatically by the default sequence of the disc. You can use , or number buttons to select a certain track to play.

Pause/

During playback, press PAUSE button to pause the playback, then press PLAY button to resume playback.
During playback, press button once to pause the playback, then press it again to resume playback.
During playback, press the STOP button once to stop playback. Then press PLAY button, the player will resume playback from the stopped point. Press this button twice to stop playback completely.
During playback, press button once to stop playback. Then press button, the player will resume playback from the stopped point. Press button twice to stop playback completely.

Press the button to start fast forward playback. Press it repeatedly to fast forward at the speed of 2X, 4X, 8X, 16X and normal playback in sequence. Press the button to fast reverse. Press it repeatedly to fast reverse at the speed of 2X, 4X, 8X, 16X and normal playback in sequence. Press the PLAY button on the remote control to resume normal playback.
Press REP button repeatedly to repeat a Track, All or cancel the repeat.

CD Playback (continued)

A-B button

Press Press

button to play the previous track. button to play the next track.
Press GOTO button to select desired track, track time or disc time. Use or direction button to move the blue bar to track time, track or disc time Use 0-9 buttons on the remote control to enter the desired time and press ENTER button to confirm. Press it repeatedly to cancel the item.
Press INFO button for detailed information about the disc during playback. Press it again to cancel the information.
Press AUDIO button to select desired sound effect. Press it repeatedly, the display will be as follows: LEFT RIGHT STEREO

Picture CD Playback

1. Load a Picture CD in the disc tray, the player will search for disc automatically. 2.The screen displays the Root Folder with several subdirectories/subfolders. Use , buttons to select a desired folder. Then press ENTER button on remote control or front panel to confirm your selection. 3.The screen enters the selected subfolder with several pictures. Use , buttons to select the desired picture. Then press ENTER button on remote control or front panel to confirm your selection. 4.Press button to return to last folder or directory. Or move the yellow bar to , then press ENTER button on remote control or front panel to return to the last folder or directory.
Note: Many discs have other items besides pictures. Buttons Operation
During playback, press the STOP button once to stop playback. Then press PLAY button, the player will resume playback from the stopped point. Press this button twice to stop playback completely. During playback, press button once to stop playback. Then press button, the player will resume playback from the stopped point. Press button twice to stop playback completely.

STOP/ button

PAUSE/ button
Press PAUSE button to pause during playback. Press PLAY button to resume normal playback.
Press button to pause during playback. Press it again to resume normal playback.
During playback, press the the previous picture. Press the next picture.
PREV button to go to NEXT button to go to
Press REP button to repeat a track, all or cancel the repeat.
Picture CD Playback (continued)
Press GOTO button to select the desired folder or picture. Press 0-9 buttons to select your favorite folder or picture directly.

Picture Rotate

While browsing a picture, you can use direction picture. Press
buttons to rotate the current
button to rotate the current picture clockwise, as following drawings:
button to rotate the current picture anti-clockwise, as following drawings:

System Setup

You can change the default settings of this unit to customize its performance to your own preference. Read this section to learn how to set up the system. Note: the system should only be set up in the state that no disc (the disc tray should be closed) is in the DVD drive or the unit is in the completely stop mode. Follow the steps below to set up your system: 1.Press the SETUP button. The setup menu will appear on the screen. It includes language setup and preferences. You can exit from the setup menu by pressing SETUP button again at any time during the setting. or button to select a sub-menu that you want to set up. 2.Press 3.Press or button to select the item that you want to set up in the sub-menu.
Press SETUP button, then the screen will display as the left.

Language Setup

1. OSD LANG This item is used to set the OSD (on-screen display) language. Press to enter the setup of this item. There are eight languages for you to choose. English by default. Press or button to choose the proper one. Press ENT button to confirm your selection. Press to exit from this item.
2. AUDIO This item is used to set the audio output language. Press or button to highlight this item. Press to enter the setup of this item. There are several languages for you to choose. English by default. Press or button to choose the preferred Language. Press ENT button to confirm your selection. Press to exit from this item.

3. DISC MENU This item is used to set the menu language. Press or button to highlight this item. Press to enter the setup of this item. There are several languages for you to choose. English by default. Press or button to choose the preferred Language. Press ENT button to confirm your selection. Press to exit from this item.
4. SUBTITLE This item is used to set the subtitle language. Press or button to highlight this item. Press to enter the setup of this item. There are several languages for you to choose. Off by default. Press or button to choose the preferred Language. Press ENT button to confirm your selection. Press to exit from this item.

Preferences

1.TV DISPLAY This item is used to set TV display mode. Press button to enter the setup of this item. It includes 4:3 PS (default), 4:3 LB and 16:9,. Press or button to choose the proper one. Press ENT button to confirm your selection. Press to exit from this item. Note: Select 4:3 PS or 4:3 LB when a 4:3 TV is connected. Select 16:9 when a 16:9 wide screen TV is connected.

2. ANGLE MARK

If the scene was shot from multiple angles, you can change the camera angle of the scene you are watching. Not all DVD discs have this feature. Press or button to highlight this item. Press button to enter the setup of this item. On (default): Select on, an angle icon will appear on the screen. You will be notified if alternative viewing angles are available. Off: There will no angle icon appear on the screen. Press or button to select on or off. Press ENT button to confirm your selection. Press to exit from this item.
3. RESUME This item is used to set last memory state. Note: The last memory is referred to the state that if you press PWR button, or open the disc tray cover by accident but still keep the disc in during playback, then when you start playback again, the player will begin playing from where you are left off. Press or button to highlight this item. Press to enter the setup of this item. The default setting of this item is ON. Press or button to choose on or off. Press ENT button to confirm your selection. Press to exit from this item.
4. DEFAULTS This item is used to reset the unit. Press or button to highlight this item. Press to enter this item. Press ENT button to reset. Then all the settings of your unit are back to the original state.

Use of Straps

Follow the steps below to fix the DVD Player onto the back of a car seat headrest. 1. 2. 3. 4. Place the DVD player on a soft and smooth surface with the bottom facing up. Loosen the strap and remove the buckle from the strap. Insert the strap through the holes as in Fig.1. Make sure the inside of the strap faces up. Thread the strap into the buckle as in Fig.2 and Fig.3. After threading, make sure the outside of the buckle faces up.

5. 6. 7. Repeat these steps for the other strap. Adjust the length of the straps according to the car seat. Fasten the straps on the headrest of the seat as in Fig. 4. Make sure the two straps are between the headrest support rods (if your car has them). NOTE: The drawings show the outside and the inside of the buckle and the strap.

Outside

Inside

Outside Inside

Definitions

Letterbox screen

This refers to a screen on which the playback picture of wide-screen DVDs appears with black bands running along the top and bottom.

Pan & Scan screen

This refers to a screen on which the playback picture of wide-screen DVDs is cut off at the left and right sides.

Title, Chapter (DVD)

DVDs are divided into some large sections (titles) or some small sections (chapters). Each section is numbered: these numbers are called "Title number" or "Chapter number". Title 1 Title 2 Chapter1 Chapter 1 Chapter2

Track (CD)

CDs are divided into some sections (tracks). Each section is numbered; these numbers are called "Track number". Track 1 Track 2 Track 3
JPEG is a common picture format that has small file size and low quality loss rate of picture. Hundreds of pictures can be stored in a disc in this format. In order to utilize real digital album, use film to make a "PICTURE CD" in JPEG format.

Troubleshooting

Take steps described in the tables below to solve simple problems before contacting after-sales service. If You Suspect Something Wrong, immediately turn the power off. Disconnect the power connector and check that there is neither smoke nor heat from the unit before asking for repairs. Never try to repair the unit by yourself because it is dangerous to do so. PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The disc cover may not be closed. There may not be any discs in the DVD drive. The disc may not be put in with the right way. The disc may be dirty or warped. The player's region code may not as the same as the region code of DVD disc. There may be water on the lens.
Close the disc cover. Put a disc in to the DVD drive. Put the disc in with the label side up. Clean or change the disc. Make sure the player's region code is the same as the region code of DVD disc. Remove the disc and keep the player being powered off for at least two hours.

The player cannot play.

The system connection may be not correct. The speaker may not be turned on. The sound setup of the DVD disc may be not correct. The disc may be dirty or warped.

For service, support and warranty information, visit www.Polaroidelectronics.com or in the US call 1-886-289-5168, in Canada call 1-886-301-7922 and in Mexico call 01-800-400-2443. Polaroid is a registered trademark of Polaroid Corporation of Waltham, MA USA.
7 Portable DVD Player PDM-2727 Extra Screen
Contents Safety Instructions View of Front Panel View of Side Panel System Connection Power Supply Preparation Troubleshooting Specifications

.2.3.4.5.6.7.8.9

Safety Instructions
The lighting flash with arrowhead symbol, within a triangle, alerts the user to dangerous voltage which could cause electric shock. The exclamation point within a triangle is indicates to the user to read important operating and maintenance instructions in the manual. Notes 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Maintain well-ventilated conditions around the product. Do not put product on bed, sofa or anything that blocks ventilation. Install in accordance with the manufacturers instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) This unit is equipped with a polarized plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the plug provided doesnt fit in your outlet, consult an electrician for replacement of the obsolete outlet. Removal of the polarized plug will diminish the plugs level of safety. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, for example, power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15) Apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the apparatus. Note: Do not touch the color TFT LCD screen by hand directly.

POWER button Press to access to or exit from the standby mode. -/+ button Press to adjust the value of brightness and color
MODE button Press to change the brightness and color level, press and hold for 1-2 seconds to change the aspect ratio.
Speaker Power Indicator In normal playback status, it doesnt indicate and it turns red in standby mode.

LCD Screen

View of Side Panel
Volume Control Used to adjust the volume of the headphone and speaker.
Headphone Jack Used to connect headphones for private listening. When the headphones are connected to this jack, the speaker will be turned off automatically.
Audio Input Jack Used for audio input.
Video Input Jack Use for video input.
DC 9.5V Output Jack Used for output power to the master DVD player.
DC 9.5V Input Jack Used to connect the power adapter, including the car adapter.
Connect to Master DVD player
Make sure that the master DVD player, slave LCD screen and any other electrical equipment are off before connection. 2. Connect the AC adapter to the slave LCD screen and connect the slave LCD screen with the master DVD player using power supply cord to supply power to the master DVD player. 3. Use audio and video cables to connect the slave LCD screen with the master DVD player so that the master DVD player can input audio and video to the slave LCD screen. Please see the figure below for details. 1.
Note: The AC adapter must connect to the slave LCD screen, or the slave screen will have no power supply.
1. 2. Connect AC adapter to the jack marked DC IN on the right side of the slave LCD screen in, as shown below. Plug the two-prong end of the power cord into a grounded electrical outlet.
Connect the Car Adapter Power Plug to the slave LCD screens power jack and plug the other end to the vehicles cigarette socket as the figure shows below.

SYMPTOM

HOW TO CHECK
- Make sure system connection is correct. - Make sure the speakers are turned on. - Make sure the audio source is correct.

There is no sound.

There is no picture.
- Make sure LCD screen is on and in correct video mode. - Make sure your system connection is correct. - Make sure the video source is correct.