Polaroid TLU-01541C Manual
Polaroid TLU-01541C Digital Camera, size: 2.1 MB
Here you can find all about Polaroid TLU-01541C like manual and other informations. For example: review.
Polaroid TLU-01541C manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Polaroid TLU-01541C please write about it to help other people. [ Report abuse or wrong photo | Share your Polaroid TLU-01541C photo ]
User reviews and opinions
|AllanP||8:43pm on Friday, July 9th, 2010|
|Polaroid flat screen white Perfect little telly, looks good in my bedroom! The picture is fantastic for the money.|
|gmac63||8:00am on Wednesday, May 26th, 2010|
|Problem with viewing angle I bought this tv because it is white and would go well with the kitchen, also the reviews were mostly excellent. low price - average product Bought this on the strength of other reviews and despite its low price I was a little disappointed with this product. Polaroid TLU01541WU High on spec - low on delivery. Can only think that all the good reviews were written by people viewing the screen straight on.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly. To nd out how to properly dispose of this product, please go to www.polaroid.com and click on Company or call the customer service number for your country listed in the instruction manual.
This TV incorporates High-Denition Multimedia Interface (HDMITM) technology. HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient/Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit which is different from what the receiver is connected to. 4. Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user authority to operate the equipment.
Warnings and Precautions
To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. This symbol is intended to alert the user to avoid the risk of electric shock. This equipment must not be disassembled by anyone except qualied service personnel. WARNING This symbol is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.
To reduce the risk of re or electric shock, do not expose this equipment to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Use of controls, adjustments or performance of procedures other than those specied herein may result in hazardous radiation exposure. Important Safety Instructions This symbol indicates caution points.
This symbol indicates actions that should not be done.
This symbol indicates actions that must be performed. Do not place the equipment on any uneven or unstable carts, stands, tables, shelves etc. The equipment may fall, causing serious injury to children or adults and serious damage to the equipment itself. Use only a cart or stand recommended by the manufacturer. This equipment and recommended cart or stand should be handled with care. Quick stops, excessive force, and uneven surfaces may cause the equipment and cart/stand to overturn. Do not disable the 3-wire grounding type plug. The grounding pin on the 3-prong plug is an important feature. Removing the grounding pin will increase the risk of damaging the equipment. If you can not t the plug into the electrical outlet, contact an electrician to install a grounding outlet. Always operate this equipment from the type of power source indicated on the rear of the serial/model plate. Never overload wall outlets and extensions.
Use and handle the power cord with care. Do not place any heavy objects on the AC power cord. Do not pull the AC power cord. Do not handle the AC power cord with a wet hand. Do not touch the power cord and antenna cable during lightning. Remove the plug from the wall outlet, if the equipment will not be used for a long period of time. Do not place, use or handle this equipment near water. Never expose the equipment to liquid, rain, or moisture. Seek for service if any of the above is spilled into the equipment. Do not expose the equipment to extreme temperature or to direct sunlight, as the equipment may heat up and suffer damage. Do not install the equipment near any heat sources such as radiators, heat registers, stoves, or any other apparatus that might produce heat. Do not attempt to service the equipment yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards and may void your warranty. Refer service to qualied personnel. Do not place or drop any other objects on top. Do not insert anything into the ventilation holes of your equipment. Inserting any metal or ammable objects may result to re or electric shock. Protect the power cord from being walked on or pinchrd particularly at plugs ,convenience receptacles, and the point where they exit from the apparatus. Do not place the equipment on uneven or unstable carts, stands, tables, shelves etc. The equipment may fall, causing serious injury to children or adults and serious damage to the equipment itself. Always place the equipment on the oor or on a surface that is sturdy, level, stable and strong enough to support the weight of the equipment. Do not block any ventilating openings. Leave an open space around the equipment. Never place the equipment : on a bed, sofa, rug, or any other similar surfaces; too close to drapes/curtains/walls, in a bookcase, built-in cabinet, or any other similar places that may cause poor ventilation. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Always remove the power cord from the outlet before cleaning the equipment. Never use liquid or aerosol cleaners on the equipment. Clean only with a soft dry cloth. Only use attachments/accessories specified by the manufacturer. ENGLISH
Outdoor Antenna Safety Instructions
If an outdoor antenna is connected, follow the precautions below: An outdoor antenna should not be located in any area where it could come in contact with overhead power lines, or any other electric light or power circuits. When installing an outdoor antenna system, extreme caution should be taken to prevent contact with power lines. Direct contact with power lines may be fatal and should be avoided at all costs.
Section 810 of National Electrical Code (NEC) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Antenna lead-in wire
Antenna discharge unit (NEC section 810-20) Electric service equipment
Grounding conductors (NEC section 810-20)
Power service grounding (NEC Art250 part H) NEC : National Electrical code
EXAMPLE OF OUTDOOR ANTENNA GROUNDING
TABLE OF CONTENTS
Important Safety Instructions... 1 Antenna Safety Instructions...4
Chapter 1 Introducing the LCD TV
Package Contents...6 Setting Your LCD TV.... 7 Your LCD TV....8 Remote Control...11
Chapter 2 Installing the LCD TV
Connecting a TV Cable or Aerial...14 Connecting a DVD Player...17 Connecting a VCR & Video Camera...18 Connecting a TV box and satellite Receiver..19 Connecting an Audio Receiver...20
Chapter 3 Using The Features
Basic Operation....21 OSD Menu Operation... 22 The Video Settings....23 The Audio Settings....23 The Setup Settings....24 The Parantal Settings.... 25 The Screen Settings....25 Using The DVD Features....26
Make sure all of the following contents are included. LCD TV
Remote Control/ AAA Batteries x 2
POWER CH LIST SUBTITLE
INFO P MODE
Quick Start Guide
These items are all you need to set up and operate the LCD TV in its basic conguration.
Make sure all of the above contents are included in the package. If you are missing any items, please contact the Polaroid customer service department.
Setting Up Your LCD TV
How to install the TV Stand Follow the instructions below to install the TV stand: Open the box, and make sure all necessary parts are in the box. The package contains:
Cover an even stable surface with a soft cloth. Place the LCD TV unit facedown on the cloth. Fit the stand onto the bottom of the LCD TV unit as shown:
Then push until the stand clicks into the LCD TVs stand socket.
To Remove the LCD TVs stand socket for wall mounting: Ensure the stand base is removed. For wall mounting the stand socket attached to the back of the TV should be detached. Using a Phillips screwdriver remove the screw which is inside the stand socket. The stand socket section should then slide off the locator rod connected to the TV. To attach this LCD TV to a wall a standard 100x100 VESA mounting bracket is required. 7
How to setup the TV
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TVs ANT. terminal (refer to page 15-18). Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
Insert the 2 batteries supplied in remote control.
Slide the back cover up to open the battery compartment of the remote control.
Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. Slide the cover back into place.
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner etc.) on the remote, as it may suffer damage.
Connect other an external AV device (refer to page 19-25).
Your LCD TV
Front/Left /Right Side View and Controls
Right Side View
Left Side View
IR Infrared Receiver LED The LED light indicates when the LCD TV is activated.
VOLUME+Adjusts the volume up and down. Selects the main-menu item and change values for items when in the OSD mode.
Connects to the external headphone for private listening.
CHANNEL Scans up and down through channels. Selects sub-menu item when in the OSD mode.
MENU Press once to display the OSD (on screen display), press again to turn the OSD off.
INPUT Chooses from different input signal sources.
Turns the LCD TV on and into standby mode. 9
Rear View and Jacks
1 AC IN / Power Switch
Connects the AC power cord to this socket./ Make sure that this switch is in the ON position (Red LED light will show on the bottom centre of the TV). Connect to external equipment with scart socket. This scart input allows audio and CVBS/YC/RGB+CVBS. RGB,S-VIDEO from an external devise to be shown on your TV. Connects to the S- VIDEO output sockets and Audio output sockets on your video equipment. Connects to the composite A/V output sockets on your video equipment. Connects to the component (Y, Pb, Pr) video sockets and audio (L/R) sockets of your DVD player, HDTV, or video equipment. Connects to a PC or other devices with a VGA interface.
2 AV1 SCART 3 AV2 S-VIDEO/AUDIO (L/R) 4 AV3 VIDEO/AUDIO(L/R) 5 AV4 Y, Pb, Pr /AUDIO(L/R) 6 AV5 PC/VGA IN/PC AUDIO IN 7 AV6 HDMI IN 8 DIGITAL OUT 9 VHF/UHF IN
Connects to devices with a HDMI interface. Connects to digital out socket on external digital audioequipment. Connects RF input from VHF/UHF antenna or cable to receive high/standard definition television.
Your Remote Control
Turns the LCD TV on and into standby mode.
Mutes and restores your LCD TV sound.
Pressing enter ATV (analogue) or Digital (DTV) Mode.
Select and switch to a channel by using 0-9 buttons.
In DTV mode,pressing GUIDE key displays the electronic program guide on the screen.
Changes the channels up and down.
Increases and decreases volume.
Sets the LCD TV sleep time. - Press the SLEEP button to select the number of minutes. followed by 15, 30, 60minutes and off. The timer begins to count down from the number of minutes selected. a.To check the remaining sleep time, press the SLEEP button once. b.To cancel the sleep time, repeatedly press the SLEEP button until the display off appears. c. If you turn the set off after setting the sleep timer, the setting will be erased.
Display all channel list & name.
Press the SUBTITLE key to display the subtitle which is broadcast with the program on the screen.
Turns on and off the Teletext function.
Selects picture mode: Custom, Vivid, Standard, Mild.
I-II Cycles through the TV Sound options: MONO/DUAL/STEREO.
Exits the OSD menu (on-screen display).
Pressing once displays a variety of information such as the current channel and the input source.
INPUT Cycles among the different input signal INPUT:
TV AV1(SCART) AV2(S-VIDEO) AV3(CVBS) AV4(Y Pb Pr) AV5(VGA) AV6(HDMI) DTV
Accesses the TELETEXT items or corresponding pages. The coloured buttons are used to access interactive modes when using Digital / Freeview TV channels.
Refer to the owners manual of any external equipment to be connected. When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed.
Connecting a TV Cable or an Antenna
Antenna Connection The antenna requirements for good color TV reception are more important than those for a black & white TV reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connection that is provided with the various antenna systems.
A 75-ohm system is generally a round cable (not included) with Ftype connector that can easily be attached to a terminal without tools.
75-ohm coaxial cable (round)
A 300-ohm system is a flat twin-lead cable (not included) that can be attached to a 75-ohm terminal through a 300-75-ohm adapter (not included).
300-ohm twin-lead cable (flat)
Use one of the following two diagrams when connecting an outdoor antenna. A: Shows how to use a VHF/UHF combination outdoor antenna. B: Shows how to use a separate VHF and/or UHF outdoor antenna. A. Combination VHF/UHF antenna
300/75-ohm adapter (not included)
300-ohm twinlead cable
75-ohm coaxial cable
B. Separate VHF and/or UHF antennas
Press the SOURCE button and choose TV or DTV mode then press OK to select.
Connecting a DVD Player
Rear of TV
Audio Audio (R) ( L)
METHOD A (AV4 ) Use a Component cable to connect the (Y Pb Pr ) sockets on the DVD player to your LCD TV. Use an audio cable to connect the DVDs audio sockets to your LCD TV. METHOD B (AV2) Use an Audio cable to connect the DVDs audio output sockets to your LCD TV. Use a S-Video cable to connect your LCD TV and DVD player. METHOD C (AV3) Use an A/V cable to connect the DVDs composite output sockets to your LCD TV. METHOD D (AV1) Use a SCART cable to connect the DVDs SCART socket to the LCD TVs SCART socket. Connect all power INPUTs before turning on the power switch of the LCD TV or other connected equipments.
Press the POWER button to turn on your LCD TV.
To watch DVD, press the INPUT button to select AV1,AV2, AV3,AV4.
Connecting a VCR&Video Camera
Audio Audio (R) (L )
METHOD A (AV2) Use an Audio cable to connect the VCRs/ the Video Cameras audio output sockets to your LCD TV. Use a S-Video cable to connect your LCD TV and VCR player/ video camera. METHOD B (AV3) Use an A/V cable to connect the VCRs/ video cameras composite output sockets to your LCD TV. METHOD C (AV1) Use a SCART cable to connect the VCRs SCART socket to the LCD TV s SCART socket. Connect all power INPUTs before turning on the power switch of the LCD TV or other connected equipments. Press the POWER button to turn on your LCD TV. To watch video camera, press the INPUT button to select AV2 or AV3.
To watch VCR, press the INPUT button to select AV1, AV2 or AV3.
Not all cameras have the ability to connect to a TV. Please check your video camera user guide for compatibility.
Connecting a TV Cable Box or Satellite Receiver
Audio Audio (R) (L)
Satellite antenna cable
TV CABLEBOX TV CABEL BOX
Method A(AV4) : Use a Component cable to connect the Y/Pb/Pr sockets on the TV Cable Box to your LCD TV. Use an Audio cable to connect TV cable boxs audio output sockets to LCD TV. Method B(AV2) : Use an Audio cable to connect the TV Cable Boxs audio output sockets to your LCD TV. Use a S-Video cable to connect your LCD TV and TV Cable Box. Method C(AV3) : Use an AV cable to connect the TV Cable Boxs composite output sockets to your LCD TV.
Method D(AV5) : Use a VGA 15 pins cable to connect the TV Cable Boxs RGB output sockets to your LCD TV. Use a 3.5mm socket to RCA adapter cable for connecting audio.
Method E(AV1) : Use a SCART cable to connect the TV Cable Boxs SCART socket to the LCD TVs SCART socket. Method F(AV6) : Use a HDMI cable to connect the Satellite Receiver HDMI connector to your LCD TV. Connect all power INPUTs before turning on the power switch of the LCD TV or other connected equipments. Press the POWER button to turn on your LCD TV.
To watch TV cable box, press the INPUT button to select AV1, AV2, AV3, AV4 ,AV5. To watch programs satellite receiver, press the INPUT button repeatedly to select AV6.
Connecting an Audio Receiver
Use an audio cable to connect the audio receivers audio LINE IN sockets to LCD TV s DIGITAL OUT sockets. Connect all power INPUTs before turning on the power switch of the LCD TV or other connected equipments. Press the POWER button to turn on your LCD TV.
Chapter 3 Using the LCD TV
Chapter 3 USING THE FEATURES
Tuning in the TV channels After connecting an aerial to your LCD TV and connecting the mains cable to the TV and 230VAC mains socket, turn the POWER SWITCH of rear TV on, a red light will show on the front centre panel of the TV. Press the POWER button, the red light will change to green and the First Time Installation screen will show: 1. Make sure an aerial is fitted then press OK button on the remote to start the Auto Programme Scan (APS).
2.In a short while you will see the TV programmes briefly as each channel is received and stored in the memory. When APS is completed BBC1 digital TV will show, press CH+/buttons to view the other channels stored.When finished ATV scan.TV will Auto change to DTV do the first installation channel. To view analogue TV press INPUT button and use the up / down arrow buttons to select TV and then Press the OK button.Change channels by pressing the CH +/- buttons. To power off press the POWER button, the green light will change to red. Selecting a INPUT Press the INPUT button to display the function required (TV/AV).Using the arrow buttons on the remote highlight the function required and press the OK button to select the function. Select TV Channel Press the CH.+/- button on the remote control and the CH.+/-button on the LCD TV to change the TV channels. You can directly select the TV channel required by pressing 1,2 or 3 etc on the remote button pad. Adjusting the Volume Press the VOL. +/ button on the remote control or the VOL. +/- button on the LCD TV to adjust the volume. To Mute the Sound Press MUTE and the sound cuts off. To turn mute off, press the MUTE button again, or simply press the VOL +/- button. Sleep Timer Press the SLEEP button continuously to select the sleep timer or turn the sleep timer from the OFF,15,30,60minutes; when the LCD TV has reached the set time, it will automatically turn off. If the TV has no input signal, it will automatically power down to standby after 15 minutes.
OSD Menu Operation
1 The main menu provides access to the following menus: Video Adjust picture setting such as picture mode, contrast, brightness,sharpness colour and advanced. Adjust sound option and effects. Adjust colour standard, sound standard, APS, Manual search, Channel setup. Adjust preferences such as OSD, blue screen, childlock, sleep timer, OSD timer, OSD reset.
Adjust screen such as horizontal size, horizontal position, vertical position, phase, auto sync. The DTV menu provide four submenus as follow: edit channel list,configuration,parental control, EPG (Electronic Programme Guide),with which you can set the DTV as you wish.
Audio Setup Preferences
DTV (Digital TV)
2 Press the MENU button on the remote control. The main menu will appear on the screen. 3 Use / to highlight your main menu option, then press OK to enter your selected option. Use /
to highlight an option of the sub-menu. Use /
to change the value of the
item.Press the EXIT button to exit menu.
VIDEO Use this Video setting menu to adjust the picture quality which best corresponds to your viewing requirements.The Video Menu includes the following options:
OPTION Picture Mode
Custom:Select for users settings. The items of video can be adjusted when the picture mode is for users settings except advanced item. Vivid:Select for enhanced picture contrast and sharpness. Standard:Select for standard picture settings. Recommended for home entertainment. Mild:Select for mild picture settings.
Contrast Brightness Colour Tint(NTSC) Sharpness
Adjust the difference between the brightness and darkness regions of the picture. Adjust to increase or decrease the brightness. Allows to adjust the colour from 0 to 100. Allows you to adjust the color tint of the picture.(Only for NTSC) Adjust to sharpen or soften the picture.
The VIDEO Settings
Display Mode Allows you to select the display mode to be Wide, 4:3,Original, Zoom. DCE Allows you to adjust the (Dynamic Contrast Enhancemen) to be off, low, mid, high. Allows you to adjust the blue stretch. Allows you to adjust the green stretch. Allows you to adjust the color temp. to be cool, warm , standard.
Blue Stretch Green Stretch Color Temp.
AUDIO Use this AUDIO setting menu to adjust the sound and balance and volume to your listening requirements.
presets the volume to a given setting. Adjust to emphasize left or right speaker balance.
The Setup Settings(Analogue TV)
Setup menu is only available when viewing Analogue TV. Use this Setup menu to select Colour Standard, Sound Standard, APS, Manual Search, Channel Setup.Use the Up/Down arrow buttons to highlight the required setting. Press the Press OK button to select the function. Use left / right arrow buttons to adjust the settings. Press OK to save the adjustment.
OPTION Colour Standard
DESCRIPTION Allows you to select the colour standard : AUTO,PAL, SECAM, UK = PAL.
APS Manual Search Channel Setup
Allows you to select the sound standard : DK, BG, I, L/L. DK PAL D/K, SECAM D/K (East Europe / China ) PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa /Australia) I PAL I (U.K. / Ireland / Hong Kong / South Africa) SECAM L/L
Start APS Press OK to start Auto Search and auto sort process. Note: Auto Sort will only operate in UK. Country Allows you select the country :Austria, Belgium, Switzerland, Czech Rep., Germany, Denmark, Spain, France, Finland, UK, Greece, Hungary, Italy, Norway, Netherlands, Portugal, Poland, Sweden, Slovenia, Slovakia, Turkey, Others.
Allows you to adjust the manual search by hand if signal is too weak or picture is blurry.
Press the button to select Sort, Delete, Skip, Finetune, Save.
Allows you to manually sort the stored programme. Allows you to delete the stored programme. Allows you to skip the stored programme. Allows you to finetune the stored programme. Allows you to save the setup.
The Preferences Settings
Use this Preferences setting menu to set up some features: OSD, Blue Screen, Childlock, Sleep Timer, OSD Timer, OSD Reset.
DESCRIPTION Language : Allows you to select the OSD to be English, French, Spanish, German, Italian, Portugese, Dutch, Polish. Transparency: Allows you to adjust transparency from 0 to15. Allows you to select the blue screen to be off or on. Allows you to select the childlock to be yes or no. (Default password is 0000. golden password is 3796.) Change Pin: Allows you to change the 4-digit password. Allows you to select the sleep timer to be off, 15min, 30min, 60min. Allows selection of the display time of the onscreen menu:5 s,10 s,15 s, 20 s, 25 s.
Allows you to restore the factory settings.
SCREEN(Only for VGA)
OPTION Horizontal Size
DESCRIPTION Allows you to adjust the Horizontal Size from 0 to 100.
Horizontal Position Vertical Position Phase
Allows you to adjust the Horizontal Position of the picture. Allows you to adjust the Vertical Position of the picture. Allows you to improve focus clarity and image stability. Allows to auto synchronize VGA signal.
Chapter 4 Using the DTV OSD Settings
OPTION Edit Channel List DESCRIPTION Lock some channels that are not suited for younger members of the family, skip/add the channel list as you wish. Configuration Add new channel, set audio language, subtitle language, as you wish. Upgrade the system. View the signal information. Enable or Disable the menu protection system and allows the PIN code to be changed. Electronic Program Guide
EDIT CHANNEL LIST
Highlight the Edit Channel List option, then press OK button,there are three Items in the menu.
C r eate a fa v our ite list M odifty a fav our ite list Delete a fav our ite list
E XI T
CREATE A FAVOURITE LIST
Highlight the Create a favourite list item, pressing OK button, then The menu is displayed on the screen now. Once you enter the Create a favourite list menu,a new channel list will be created,you can create four favourite lists at most. You can lock or unlock the selected channel by pressing the RED button, pressing the BLUE button to skip or add the selected channel. If you want to skip or add all, first press the GREEN button, then press either the RED button to skip all, or the GREEN button to add all. A channel selected as a locked appears in the channel list with a lock icon ( red button ) against the channel name, a channel selected as a added appears in the channel list with a add icon ( tick ) against the channel name.
Using the DTV OSD Settings
F AV 1 B B C O NE B B C TWO B B C THR EE C B B C C hannel B B C NEWS 24 BBCi
Sor t M ov e
If you want to install the channels by yourself, using the/buttons to highlight the channel installation (manual) option, and press ok to install manually. First you should choose the installation type, then you can see the following menu. Using / to cycle the channel option, then the bar graphs of signal level and signal quality will indicate whether any channels are likely to be found. You should choose the channel of which the signal quality bar is high as well, then press OK button to scan the channels.
NEW DETECTED CHANNELS The New Detected Channels menu shows the channels that you add in the channel list recently. The type icon of the program is displayed against the channel name.
Using the /buttons to highlight the user settings item in the configuration menu, then press OK button to display the user settings menu.
AUDIO LANGUAGE This function select which language soundtrack you will hear when switching to a channel broadcasting with multiple soundtracks. Highlight the audio language line in the user settings menu and use /buttons to cycle through the language options. SUBTITLE LANGUAGE This function selects the desired subtitle language whenever subtitle information is broadcast. Highlight the subtitle language line in the user settings menu and use/ buttons to cycle through the language option.
SYSTEM PARAMETERS Using the/buttons to highlight the system parameters item in the configuration menu, then press OK button to display the system parameters menu.
SYSTEM UPGRADE Highlight the System Upgrade item in the system parameter menu, pressing OK button to display the System Upgrade menu. press OK button to upgrade system. If there is a new software, the unit will upgrade itself.
SYSTEM INFORMATION Highlight the system information item in the system parameter menu, pressing OK button to display the system information menu. You can view the system information in this menu, however, you can modify nothing in this menu, Pressing OK button to quit.
SIGNAL INFORMATION Highlight the Signal information item in the configuration menu, pressing OK button to display the Signal information menu. Cycle through the channel option by using the /buttons on the remote control. The signal level and signal quality of the channel that offers the upgrade software can be observed on the two bar graphs. The bar graphs of signal quality and signal level give a good indication of whether the selected channel is likely to be found. If the signal quality bar is high as well then it is a digital frequency and digital channels will probably be found.
Highlight the parental control line in the parental control menu and use/ buttons to cycle through the enable and disable option. Toggle this option to enable, then the following items can be altered.
RECEIVER LOCK You should enter the PIN CODE before you can see the DTV program while you power on the TV and select the DTV INPUT.
Picture OK, poor sound
Sound may be muted. Press the
button on the remote.
Press the VOL+ button to increase the volume.
Move any infrared equipment away from the TV.
Various Audio/Video terminals for external equipment connection
1 set of composite A/V input terminals 1 SCART input terminals 1 set of component Video input terminals 1 VGA/ Audio input terminal 1 HDMI/Auido input terminals 1 Headphone terminal
High Definition Multimedia Interface (HDMI)
High Definition Multimedia Interface (HDMI) is a small, user-friendly interconnect that can carry up to 5
Gbps of combined video and audio in a single cable. This system eliminates the cost, complexity and confusion of multiple cables used to connect current A/V systems.
HDTV Component Video Inputs
Offers the best video quality for DVD(480p) and digital set-top-box (HD1080i, 720p) connections.
3D Digital Noise Reduction
This function can digitally reduce image noise to provide better picture quality.
WSS(Wide Screen Scale) Function
This function can automatically convert and display any aspect ration (4:3 / Wide) TV
Built-in ATV and DTV Tuners
The built-in DTV tuner allows the reception of DVB-T broadcasting without the addition of a set-top
The screen resolution has been optimized during production for the display modes listed below. If the signal from the system equals the standard signal mode, the screen adjusts automatically. If the signal from the system is not equal to the standard signal mode, adjust the screen resolution by referring to your video card user guide, otherwise there may be no video. Video signal: (VGA Standard)
Resolution (Dot X Line) 640 x 480 Vertical Frequency(Hz) 59.94 72.80 75.x 600 60.31 72.18 75.x 768 60.00 70.06 75.02 Horizontal Frequency(kHz) 31.46 37.86 37.50 37.87 48.07 46.87 48.36 56.47 60.0.2
MODEL LCD Panel Panel Size Brightness Contrast Ratio Max. Resolution Input Connector VIDEO S-VIDEO TLU-01541C 15.4 TFT LCD 200 400:1 1280x1 TLU-01941C 19 TFT LCD 300 850:1 1440x1 ENGLISH
YPbPr/ AUDIO IN(L/R) 1 AUDIO IN(L/R) PC/VGA IN HDMI IN PC AUDIO IN DIGITAL OUT HEADPHONE VHF/UHF IN Power Source Power Consumption Dimension WEIGHT 1
AC100~240V, 50/60HZ, 1.2A AC100~240V, 50/60HZ, 1.2A 50 W, standby < 3 W 15.2 w x 13.6 h x 5.2 d inch 7.1 LB 65 W, standby < 3 W 18 w x 15.9 h x 5.2 d inch 12.3 LB
NWZ-A815 PR55HY21CA Berserk Fury RC-960BX MF6550 FO-5550 SM 1102 Audio SDJ2 7C-2 4GHZ IN 1 Kenox S760 4X4 LE Assist Z301 TL-SG1016 HP-137R Celia Black Evo3 Harmony 890 Fostex D-5 HD2611 17000 TX-SA601 Headset 250-2005 UP102 Recipes GW71E-S ACC143 DFH755 ICF-C7IP DCR-DVD305 Turntable GO 2000 RM-VZ220 Hunters BV7970 STR-DB798 SUP 016 EWT1215 Precision 8D Cooker GXT400 REV12 Review LD-2293THB HBR556 C1000 D1976 6 03 AA-1030L 71003 Cadence G-40 FAV5071W WC003V3 RIM 2500 Audio PSX R-771 42LG30-UD 5nikkor DP-C264 CJ-765W HR-S7950EU ITD 59N V9122W Markus 800 CA-R-pi 151 KV-EF29m90 LC-37D5U E-300 RY08510 Wgps606 MX3000 SA-HT95 Doro 730R Scanner Toolbox Kxtca120FX TD-C70045E Watch C46 WJ-DR200 Xemio-654 RT-250 KLV-40W300A TX-32LX1A KX-TG1311TR WD-12380FBN SRU3003 GR-D230EK Plugin Card Game ES-727 L100T Deville 1996 RD 3000 El-900B Downr SRS-Z1000 Turbo Smartcast L1917S-SN Amis60
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101