Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 6a

Fig. 7

Fig. 8

Fig. 9

Fig. 10

Fig. 11a

Fig. 11b

Fig. 12

Fig. 13

Fig. 14

Fig. A

Fig. C

Fig. B

Fig. D

E3 A1 C P O1 E5 E4 E2 G C 20-A B1 B3
B2 R K S F D Q M Z B2 L K1 T B3

W1 X X1

LECOASPIRA AS720 LUX
KEY 1) Main switch 2) Boiler switch 3) Out of water switch 4) Pressure indicator lamp 5) Suction UP indicator lamps 6) Carrying handle 7) Sealing cap of the self-filling tank 8) Steam control knob 9) Flap of the built-in socket 10) Built-in socket 11) Air outlet grill 12) Pivoting wheels 13) Power supply cable 14) Supply cable canal 15) Supply cable storage 16) Accessories holder 17) Hepa filter 18) Unhooking lever for Hepa filter 19) Hepa filter holders 20) Water container 21) MAX level (fig. 5) 22) Water container handle 23) EcoActive Filter water filter assembly 24) EcoActive Filter water filter assembly cover 25) Shaped filtering sponge 26) Filter body with microholed net 27) Elbow tube KEY TO ACCESSORIES A1) Fitting for connecting accessories A2) Handle A3) Safety button A4) Suction button A5) Steam button B1) Steam+suction hose B2) Monobloc plug B3) Locking button of the monobloc plug C) Button for locking accessories in place D) Flexible steam + suction tube E) Universal brush E2) Brisled inserts E3) Liquid suction inserts E4) Insert for fitted carpet E5) Cotton cloths F) Joker brush G) Parquet accessory K) 120 steam-suction accessory K1) Steam lance L) Small coloured 120 steam-suction brushes M) Small steam-suction nozzle N) Small steam-suction upholstery nozzle O) Window-cleaning fitting for small steam suction upholstery nozzle (130 mm) O1) Window-cleaning fitting for small steam suction upholstery nozzle (200 mm) P) Bristle fitting for small steam-suction upholstery nozzle Q) Upholstery nozzle R) Lance S) Radiator brush T) Suction brush U) Filler bottle V) Spare gaskets 20-A) Water container cleaning brush OPTIONAL ACCESSORIES W) Iron W1) Continuous steam button X) Steam request button X1) Iron heating indicator light Y) Temperature control knob Z) Iron mat

ENGLISH

Dear Customer, We wish to thank you for placing your trust in us and choosing a Polti product. In choosing your Vaporetto Lecoaspira, you were thinking of the hygiene of your home and of the health of your family, because Vaporetto Lecoaspira allows you to clean most surfaces with the pure power that steam provides. It dissolves and collects dirt and traps dust-mites and allergens in the water. Thanks to the unique EcoActive-Filter, after vacuuming you can pour away the dirty water without the risk of spreading dust everywhere. The air-filtering system is completed by the air outlet filter, which retains the fine particles, so that the output air is thoroughly cleaned. Thanks to the complete set of accessories, you will be able to tackle your cleaning problems, solving them effortlessly and saving time. The controls of the equipment are also available on the handle so that they are right there within easy reach, without having to bend down. With Vaporetto Lecoaspira you will be able to use steam and suction together for a complete clean, suction alone so as to collect all the dust efficiently, or steam alone for specific cleaning tasks. We strongly recommend reading this instruction booklet carefully before using the Vaporetto Lecoaspira. What is EcoActive-Filter? EcoActive-Filter is a revolutionary water filter patented by Polti. EcoActive-Filter uses the natural purifying property of water to capture the dirt, thus avoiding unpleasant contact with the dust and its harmful dispersion into the environment. It is precisely the flow of water contained in the special filter and its bubbling that make cleaning done with Vaporetto Lecoaspira so efficient.

This unit conforms with EC-directives 89/336 as amended by 93/68 (EMC) and 73/23 as amended by 93/68 (low voltage).
Polti S.p.A. reserves the right to change equipment or accessory specification without prior notice.
PRECAUTIONS KEEP THESE INSTRUCTIONS Read these instructions for use carefully before using the appliance. Any use which does not comply with these instructions will invalidate the warranty. The wiring system to which the appliance is connected must always comply with the laws in force. Before connecting the appliance, make sure that the mains voltage is the same as the voltage indicated on the data label of the appliance and that the power outlet is connected to earth Always turn off the appliance at the on/off switch before unplugging it. If the appliance is left unused, always disconnect it from the mains. Never leave the appliance unattended with the cable plugged into the mains. Always make sure the appliance is unplugged before performing maintenance work of any kind Do not pull the power cord out of the socket, but grasp the plug itself to avoid damage to the socket. Do not allow the power cord to be twisted, crushed, stretched, or come into contact with sharp or hot surfaces. Do not use the appliance if the power cable or other important parts are damaged. Do not use electric extension leads that are not authorized by the manufacturer, as they may cause damage or fire. If it is necessary to replace the power supply cable, please refer to the nearest Polti authorised service centre, since the use of a special tool is necessary. Never touch the appliance with wet hands or feet with the cable plugged into the mains. Do not use the appliance when barefoot. Do not use the appliance near a bathtub, shower or container full of water Never immerse the appliance, the cable or the plugs in water or another liquid. Use of the appliance in places where there is a danger of explosions is prohibited. Do not use the product with toxic substances. Do not lay the hot appliance on surfaces sensitive to heat. Do not leave the appliance exposed to wind or rain. Do not place the appliance near a live element, an electric stove or any other source of heat. Do not expose the appliance to extreme temperatures Never let children or people who are not familiar with how the appliance works use it. Do not press the buttons hard or with a pointed object such as a pen. Always rest the appliance on a stable surface. In case of accidental fall of the appliance it is necessary to have it checked by an authorized Service Centre as the internal safety features may have been affected. In case of breakdown or malfunction switch off the appliance and never attempt to disassemble it, but refer to an authorized Service Centre. In order to avoid prejudicing the safety of the appliance, use only original spare parts and accessories approved by the manufacturer. Do not wind the power cord around the appliance, especially when the appliance is still hot. Do not use the appliance to suck up acids or solvents, as these might cause serious damage to the appliance and above all do not suck in explosive dust or liquids, as these could cause explosions on coming into contact with the inside components of the appliance. Do not vacuum up toxic substances. Do not suck up burning or incandescent objects such as embers, ash or other material in which combustion is taking place.

Water tank can be filled with tap water. Do not vacuum up materials such as cement, chalk etc. which solidify once they came in contact with water thus damaging the appliance During refilling with water, switch off and disconnect the appliance from the mains. It is necessary to keep the unit in horizontal position during operation. Do not direct the steam jet on electrical appliances. Leave the appliance to cool down before cleaning it. Before storing the appliance be sure that it has completely cooled down. This appliances is equipped with safety devices which are to be replaced only by a suitably qualified technician. Do not put any detergent or chemical substance in the boiler. Water by its nature contains magnesium, mineral salts and other deposits which in hard water areas can contribute to limescale build up in the tank. To avoid these problems, it is necessary to swill out with tapwater and empty the generator tank after every 3 or 4 uses.In very hard water areas we recommend the use of our KALSTOP FP 2003, a special natural-base decalcifier which inhibits and breaks down limescale, making it easy to remove just by swilling out the tank with a little tapwater. This is a preventive against scale build-up and protects the metal walls of the steam generator tank. KALSTOP is available from Polti dealers or by mail-order from your Polti Service Centre. If you iron sitting down, do not place your legs under the ironing board, the steam can cause burns. Iron only on heat resistant surfaces and on surfaces that allow the steam to escape e.g. mesh ironing boards. For iron stand replacement use only original spare parts. Check that the continuous steam request button is switched off before connecting the appliance to the mains. CORRECT USE OF THE PRODUCT This appliance is intended for home use as a steam generator and for sucking liquids and solids as described and in accordance with the instructions provided in this manual. Please read these instructions carefully and keep them, as you may find them useful in future. P R E PA R AT I O N F O R U S E Unscrew the self-refilling tank cap (7) (Fig.1) and fill the tank with about 560 cc of water by using the filler bottle (U) supplied. Water by its nature contains magnesium, mineral salts and other deposits which in hard water areas can contribute to limescale build up in the tank. To avoid these problems, it is necessary to swill out with tapwater and empty the generator tank after every 3 or 4 uses.In very hard water areas we recommend the use of our KALSTOP FP 2003, a special natural-base decalcifier which inhibits and breaks down limescale. This is a preventive against limescale build-up and protects the metal walls of the steam generator tank. KALSTOP is available from Polti dealers or by mail-order from your Polti Service Centre. Carefully screw on the sealing cap (7) to hand tight. Lift the water container handle (22) unhooking it from its position (Fig. 2) and remove the container (20) (Fig. 3). Turn the container handle (22) as shown in figure 4, so as to remove the Eco ActiveFilter water filter assembly (23). Fill the water container (20) with about 1,2 litres of simple tap water until the MAX level indicator (21) is reached, as in fig. 5. Put the filter assembly (23) back into place in the water container (20) returning

it to its initial position. Replace the water container back into position. Support the handle (22) until it hooks into its place on the water container (20). O P E R AT I O N Open the flap of the built-in socket (9); fit the monobloc plug (B2) by pushing it, without pressing the button, until you hear the click of the locking mechanism, then make sure it is well locked (fig.6). To disconnect the monobloc plug (B2) from the appliance, push the button (B3) and pull the monobloc so as to separate it from the appliance (fig.6a). Connect the plug to the mains. Operation with steam + suction Press the main switch (1), the first level of suction indicators (5) will start to flash. Press the boiler switch (2) which will light up. Wait for the pressure indicator lamp (4) to light up. When it does the Vaporetto Lecoaspira will be ready to generate steam. Press the suction button (A4) on the handle (A2). The suction function will start up at the minimum speed and the first stage of the indicator lamp set (5) will stop flashing and remain on. For correct use of the suction function read the section Suction control/ switching off. Note: The handle (A2) has a safety button (A3) which when set in locked position prevents activation of the delivery of steam. If the appliance is left temporarily unattended while it is in an activated condition, please remember to place the safety button (A3) in the locked position. To resume delivery, return the button to its initial position. You can supply steam by pressing the steam button (A5) on the handle. At the same time you can also control suction by pressing the suction button (A4). Operation with suction only If you wish to use the suction function only, press the main switch (1), the first level of the suction indicators (5) will start to flash. By pressing the suction button (A4) on the handle (A2), the suction fan will start to run at the lowest speed and the first stage of the indicator lamp (5) will stop flashing and remain steadily lit. For correct use of the suction read the section Suction control/switching off. Operation with steam only Press the main switch (1), the first level of the suction indicators (5) will start to flash. Press the boiler switch (2) which will light up. Wait for the pressure indicator lamp (4) to light up. When it does, the Vaporetto Lecoaspira will be ready to generate steam. You may now deliver steam by pressing the steam button (A5) on the handle. If you decide not to use the steam anymore, you may switch off the boiler by pressing the boiler switch (2). FILLING THE BOILER Thanks to the self-filling function, there is no longer any need to stop and wait to fill up the boiler the again. When the water inside the boiler reaches its low level, the level probe will automatically activate a pump that will fill the boiler from the tank. When there is no more water left in the selffilling tank, this will be shown by the out of water switch (3) and you will also be warned by an audible signal. In order to continue working, proceed as described in the section on "Preparation for use". R E G U L AT I O N O F T H E S T E A M F L O W

Vaporetto Lecoaspira will enable you to optimise the steam flow by means of the control knob (8) (Fig. 7). To obtain a higher flow rate turn the knob in a clockwise direction. When the knob is turned in an anti-clockwise direction, the flow rate decreases. High flow rate of steam: to remove caked dirt, stains, grease and to sanitise; Normal flow rate of steam: for wall-to-wall and loose carpeting, windows, floors; Low flow rate of steam: for spraying plants, cleaning delicate fabrics, wallpaper.
SUCTION CONTROL / SWITCHING OFF
its compartment (15) proceeding as follows: Take out the water container (20) as indicated in the paragraph preparation for use. Manually wind the cable evenly and put it in the storage (15), making it go through the power supply cable canal (14) (Fig.8). Put the water container (20) back in its place making sure it is correctly positioned. USE OF THE ACCESSORIES HOLDER The accessories holder (16) allows you to fix the tube with the brush mounted on it on the body of the appliance. To attach the hose to the appliance, slide the hook on the hose into the accessories holder slot on the appliance (Fig. 9). CONNECTION OF ACCESSORIES All the accessories of Vaporetto Lecoaspira can be connected to the handle (A2) or to the extension tube (D). To connect accessories for suction and steaming (D-E-K-N) proceed as follows: couple the handle or the extension tube to the required accessory until the connector button (C) is hooked (Fig. A) to disconnect the accessory just keep the connector button pressed (C) and separate the two parts (Fig. B) before using the accessories check they are fully connected To connect the accessories for suction only (F-M-Q-R-T) just connect them without hooking with connector button (C). CAUTION: in this case it is important to disconnect the steam function by using the safety device (A3) in order to prevent the steam leaking. SUCTION OF SOLIDS AND LIQUIDS This appliance can be used to suck up dust or liquids equally easily. However, if the water in the filter is very
You will be able to control the force of suction depending on the type of surface to be treated. The numbers are those indicated on the control panel. 1 for curtains 2 for sofas and cushions 3 for carpets 4 for hard flooring and for collecting liquids Use of the suction controls Simply by pressing the suction button (A4) you will be able to start suction. You will be able to select the speed required for the type of surface to be treated by keeping the suction button (A4) pressed. When you increase the suction power, one of the indicator lamps (5) on the control panel will light up, and when you lower it one of the lamps (5) will extinguish. To turn the appliance off just press the suction button (A4). NOTE: when you switch on the suction, the appliance will restart from the speed it was at the time of switching off. S U P P LY C A B L E S T O R A G E Before putting away the Vaporetto Lecoaspira, store the supply cable (13) in

dirty it should be replaced proceeding as described in the section Emptying and cleaning the water container. When the dirt sucked in reaches the maximum permitted level in the water container (20), suction is stopped automatically by the safety float provided for this purpose (you will notice that the engine speed has increased). ATTENTION: switch off the appliance, and only switch on again after restoring the water level in the tank as described in the emptying and cleaning the water container paragraph. IMMEDIATE RESTART WITHOUT RESTORING THE WATER LEVEL CAN DAMAGE THE AIR OUTLET FILTER. Before resuming your cleaning operations, proceed as illustrated in the section Emptying and cleaning the water container, and then top up the level of the water in the container. BIOECOLOGICO NB DO NOT USE BIOECOLOGICO OR ANY OTHER PRODUCT IN THE STEAM GENERATOR TANK, USE IT ONLY IN THE WATER CONTAINER (20) Bioecologico is available for sanitising while using the suction function. It is a scented antibacterial product with natural-based anti-allergenic substances. If it is added regularly to the water in the water container (20) of the Vaporetto Lecoaspira, it will prevent the proliferation of bacteria and microorganisms and inhibit the action of allergens. In addition to assuring a sanitising action, Biecologico will eliminate smells due to the presence of dust in the water, leaving a pleasant smell of cleanness in the room. Use:add 8 ml each time you fill the watercontainer. Bioecologico is sold by Polti dealers or by our authorised Assistance Centres. Bioecologico is available in the "neutral" unscented version or in mountain pine or citrus. EMPTYING AND CLEANING THE WAT E R C O N TA I N E R Switch off the appliance at the main switch (1) and disconnect the supply cable from the mains. Lift the water container (20) out of its compartment by means of the container handle (22) (Fig. 3). Turn the handle and take out the EcoActiveFilter water filter assembly (23), as in picture 4. Empty the container tilting it towards the small groove (Fig. 10). Pull the elbow tube (27) away from the filter body with microholed net (26) until it is removed (Fig. 11a). Take all the components apart and rinse them in running water. (If the filter sponge has any tears, it should be replaced. The filter can be purchased from an authorised Polti Assistance centre). If you wish to continue working, top up the level of the water. Put the EcoActiveFilter water filter assembly (23) back into the water container (20). ATTENTION: make the arrow on the elbow tube (27) coincide with the reference on the filter body with microholed net (26) (Fig. 11b). Put the water container (20) back in its place as described in the preparation for use paragraph. Note: make sure you empty the water container (20) before putting your Vaporetto Lecoaspira away. One of the great advantages of Vaporetto Lecoaspira is precisely the fact that it is possible to put it away clean. TIP FOR USING THE ACCESSORIES Before treating leather, special fabrics (especially dralon and velvet) or wooden surfaces with steam, consult the manufacturers instructions and always proceed only after carrying out a test on a hidden part or a sample. Allow the area treated with steam to dry and then check whether

any changes in colour or deformations have occurred before proceeding further, ensuring exactly the same steam power and distance as in the test. When cleaning wooden surfaces (furniture, doors, etc.) and brick floors always proceed with caution since excessive use of steam could damage the wax, the polish or the colour of the surface to be cleaned. It is therefore advisable to apply the steam to these surfaces only for short periods at a time or to clean them with a cloth that has been treated with steam. On particularly delicate surfaces (e.g. synthetic materials, enamelled surfaces, etc.) we strongly recommend using the steam at its lowest output power. When cleaning glazed surfaces, if the weather is particularly cold pre-heat the glass working at distance of about 50 cm away from the surface. To take care of your plants, we recommend spraying them from a distance of at least 50 cm. UNIVERSAL BRUSH (E) It is advisable to use this brush to clean large surfaces, tiled or marble covered floors, parquet, carpets etc., using the following inserts supplied with it. Bristled inserts (E2), for use only when vacuuming. Squeegee inserts (E3), to pick up liquids; recommended for smooth surfaces. Carpeting inserts (E4), suitable for fitted and loose carpets. The multi-purpose brush can be connected directly to the pistol, or to the hose by means of the extension tubes (D). ASSEMBLING INSERTS: to change the inserts, slide out the insert from its position on the brush and slid in the replacement (Fig.C). When assembling the two inserts with bristles (E2), position the solid insert towards the BACK of the brush and the grooved insert towards the front. When assembling the inserts for suctioning up liquids (E3), take care to ensure that their SMOOTH side faces inward. 120 STEAM-SUCTION A C C E S S O RY ( K ) We suggest to use this accessory to clean areas that are difficult to reach with the other accessories. The 120 accessory may be used for: treating stains on carpeting or loose carpets, before going over them with the brush; cleaning stainless steel, windows, mirrors, layered coating and paintwork; cleaning corners such as stairs, windows frames, door jambs, aluminium sections; cleaning the bases of taps; cleaning blinds, radiators, the interiors of cars; atomising house plants from a distance. The 120 accessory can also be fitted directly onto the handle (A2) or it can be connected to the flexible tube by means of the extension tubes (D). It is possible to combine the 120 accessory with the following other accessories: small coloured 120 brushes (L), suitable for removing caked dirt from very small surfaces such as cooking rings, shutters, between tiles, sanitary fittings and so on. The different colours mean that you can always keep the same small brush for use on the same type of surface. The steam lance (K1) allows you to reach the most inaccessible places. Ideal for cleaning radiators, door posts, sills, shutters and toilet bowls. To connect the lance to the 120 accessory screw it on the 120 accessory, as you screw the coloured brushes. The coloured brushes can be screwed on the lance itself. SMALL STEAM-SUCTION U P H O L S T E RY N O Z Z L E ( N ) We suggest to use this accessory on large windows, large mirrors and smooth sur-

faces, or to clean upholstery surfaces such as sofas, mattresses, etc., using the following attachments supplied with it: 130 mm squeegee attachment (O), for smaller windows; 200 mm squeegee attachment (O1) for larger windows and surfaces; bristled attachment (P) is recommended for carpeting, stairs, car interiors, and upholstered surfaces (AFTER TESTING FIRST ON A HIDDEN PART, WAITING AND SEEING HOW IT REACTS TO STEAM TREATMENT). It is also useful for removing animal hair from the same surfaces; a sponge cover (E5) may also be attached to the nozzle. Fit the attachments and slide them onto the nozzle as shown in the diagram D. To correctly use the steam-suction squeegee proceed as follows: apply steam uniformly to the surface to be cleaned to dissolve the soiling. Press the rubber squeegee against the surface to be cleaned, moving it vertically from top to bottom with the suction function switched on. Warning: in particularly cold weather, preheat the windows by applying steam from a distance of about 50 cm from the surface to be cleaned. JOKER BRUSH (F) With the Joker brush it is possible to remove all types of solid or liquid dirt, and it will work on any type of surface. PA R Q U E T A C C E S S O R Y ( G ) This accessory is for use solely with the Joker brush. Put the joker brush into place on the parquet accessory as illustrated in figure 12. Apply the brush to the accessory as indicated by the arrow so that the two pieces fit onto each other and then hook them together. To unhook the parquet accessory from the joker brush pull the two levers on the sides of the fitting outwards and then lift the brush off (Fig. 13). USING THE IRON (optional) Connect the iron to the monobloc plug (B2) proceeding as shown in the Operation paragraph. For steam ironing, adjust the temperature of the iron by positioning the temperature control knob (Y) to COTTON-LINEN. Wait for a few minutes until the Iron heating indicator light (X1) goes out, to show that the soleplate of the iron has reached the required temperature. Press the steam request button (X) to enable the steam to come out. The steam flow will stop when the button is released. When you first start to use the iron, a few drops of water may come out of the soleplate mixed with the steam due to imperfect heat stabilisation. It is therefore advisable to direct the first jet of steam onto a rag. In order to obtain a continuous jet of steam move the sliding switch (W1). The steam will continue to come out even when the steam request button (X) is released. To stop the flow of steam push the sliding switch backwards (W1). FOR DRY IRONING ONLY (NOT steam ironing), press the main switch (1) and adjust the temperature of the iron by turning dial (Y) to the temperature required for the fabric (as shown on the dial).

NOTE: using the iron, it is advisable to adjust the steam jet at a medium range, or to do some testing in order to find the jet which is more suitable to the fabric to be ironed. IMPORTANT NOTE Do not leave the iron unattended whilst connected to the mains. Iron only on heat resistant surfaces and on surfaces that allow the steam to escape e.g. mesh ironing boards. In case of accidental fall of the appliance it is necessary to have it checked by an authorized service center as the internal safety features may have been affected. ATTENTION: if you iron sitting down, do not place your legs under the ironing board, the steam can cause burns. GENERAL MAINTENANCE Before carrying out any type of maintenance make sure that the power cable has been disconnected from the mains. After using the brushes it is advisable to allow the bristles to cool in their natural position so as to avoid them getting deformed in any way. Check the conditions of the gaskets located inside the monobloc plug (B2) periodically. If necessary, replace them with the appropriate spares. Also carry out the same check on the gaskets for connecting the extension tubes (D) and the handle (A2). To clean the outside of the appliance, just use a damp cloth. Do not use solvents or detergents as these might damage the plastic surface. To clean the ECOACTIVE-FILTER holder and clean or change the sponge filter, follow the instructions in the paragraph headed EMPTYING AND CLEANING THE WATER CONTAINER. WASHABLE HEPA FILTER WARNING: Vaporetto Lecoaspira is equipped with a washable filter. To clean the filter, proceed as follows: Unfasten the handle (22) of the water container and remove the container (20) as described in the paragraph headed PREPARING THE APPLIANCE FOR USE. Lift the Hepa filter release lever (18) and remove the filter from its recess (Fig. 14). Rinse the filter in cold running water. Shake it gently after washing to eliminate any residual dirt and excess water. NOTE: let the filter dry naturally, far away from light and heat sources. You should wait 24 hours before reassembling the filter in the appliance. Replace the filter if it is torn. The filter should be cleaned every 4 months. To correctly position the Hepa filter (17) make sure that it fits properly into its recess (19) and then that the release lever closes over it holding it in place (18) (Fig.14). WARNING: Do not clean the filter with the brush, as this could damage it, decreasing its filtering capacity. Do not use detergents, do not scrape filter, and do not attempt to wash it in a dishwasher.
AT T E N T I O N This appliance is built according to current regulations for recycling. Do not throw the appliance and packing materials used to protect the appliance during transportation, but take them to relevant collecting centers. Use only original Polti spare parts. Filters are sold in authorised assistance centres and in all major appliance shops. Polti declines liability for any damage or accident derived from any use of Vaporetto Lecoaspira which is not in conformity with the instructions contained in this booklet. FOR YOUR OWN SAFETY READ FOLLOWING INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO CONNECT THIS UNIT TO THE MAINS.

GREEN & YELLOW (Earth) FUSE (13 amp)

BLUE (Neutral)

BRAWN (Live)
M A I N S ( A C ) O P E R AT I O N ( o n l y U. K. ) This unit is designed to operate on 240V, 50 Hz current only. Connecting it to other power sources may damage the unit. WARNING -This appliance must be earthed. This appliance may be fitted with a non rewirable plug, if it is necessary to change the fuse in a non rewirable plug the fuse cover must be refitted. If the fuse cover is lost or damaged, the plug must not be used until a replacement, available from the appliance manufacturer, is obtained. It is important that the colour of the replacement fuse cover corresponds with the colour marking on the base of the plug. If the plug requires to be changed because it is not suitable for your socket, or becomes damaged, it should be cut off and an appropriate plug fitted following the wiring instruction (below). The plug removed must be disposed of safely as insertion into a 13A socket is likely to cause an electrical hazard.
IMPORTANT These wires in this mains lead are coloured in accordance with the following code. Green-and-yellow: Earth Blue: Neutral Brown: Live As the colours of the wires in the mains leads of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol or green-and-yellow. The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
TROUBLESHOOTING TROUBLE CAUSE The suction fan does not start No power supply SOLUTION Check the cable, plug and socket The boiler filling pump can be Air in the boiler circuit. Switch off the appliance, allow heard working continuously it to cool and repeat the operations described in the OPERATION chapter. The suction power drops The upholstery nozzle, the Clen the filter and remove any flexible tube or the stiff suc- obstruction from the tubes tion tube are clogged. and accessories. Follow the instructions in the paragraph headed GENERAL MAINTENANCE Water is spilled while sucking Float device clogged Clean the EcoActive Filter up liquids. water filter assembly. Appliance has stopped vacu- Float has interrupted suction Switch the appliance off, uming make sure that water level in the tank is correct and switch the appliance back on. The Hepa filter is exhausted