Hola amigos de YouTube en este tutorial les enseñare a como descargar NORTON PARTITION MAGIC 8 PORTABLE. ANTES ...
que tal pues este es mi primer video, este programa es muy bueno porque nos permite crear particiones en el disco duro sin ...
http://www.megaupload.com/?d=U699M1RZ suscribance a mi canal xfaa!!!!
Creating System Maintenance and Network Boot Disks
You may download the most recent System Maintenance Disk (SMD) software directly from the DMU Downloads section of our website. Please note that you will also need to use the latest version of the Network Boot Disk (NBD). Compare the revision number on your disks to the revision numbers on the software links. If you do not have the latest versions of either the SBD and/or NBD, please download them at this time. The downloads for the SMD and the NBD are ISO CD images. Each of these ISO images must be burned to its own recordable CD using almost any CD burning software (i.e. Nero, Roxio, etc.) by selecting the equivalent of the "Burn image to disk" command. Follow the steps below to correctly burn the ISO CD images using both Nero Burning Rom and Easy CD Creator. If you use a different burning utility, the process will probably be very similar to one of these.
Nero Burning Rom
Figure 1: Start the Nero Burning Rom application.
Figure 2: Select the Burn Image ...
Printing a Poster on the HP DesignJet 500PS
Open your pdf in Acrobat and choose File > Print
Choose the HP DJ 500 (Postscript) driver
Click Properties and click on Advanced,
On the Paper Size dropdown menu, choose Postscript Custom Page Size
Enter the dimensions of your poster in the Width and Height fields. Your Height will normally be 42in. and Width will usually be larger. Click OK.
Scroll down and change the media type to Coated Paper and click OK. Click OK again to return to the main print window.
Check the orientation of your poster in the preview window. Page Scaling should be set to Fit to Printer Margins. Click OK to print.
Check the System Tray for the HP DesignJet 500PS Icon and doubleclick it.
If it is not there, start it by going to Start > All Programs > HP DesignJet 500PS > HP DesignJet 500PS. Then, doubleclick on the icon in the System Tray.
This will open the RIP software and you will be able to monitor the progess of your print job.
Partition Types
Partition Types
The number on the right is in Hexadecimal.
a 0a 0a 0b 0c 0e 0f 1b 1c 1e 3a 3b 3c 3d a 4a 4c 4d 4e DOS 12-bit fat XENIX root XENIX /usr DOS 3.0+ 16-bit FAT (up to 32M) DOS 3.3+ Extended Partition DOS 3.31+ 16-bit FAT (over 32M) OS/2 IFS (e.g., HPFS) Advanced Unix Windows NT NTFS QNX2.x (pre-1988) OS/2 (v1.0-1.3 only) AIX boot partition SplitDrive DELL partition spanning multiple drives Commodore DOS QNX 1.x and 2.x ("qny") AIX data partition Coherent filesystem QNX 1.x and 2.x ("qnz") OS/2 Boot Manager Coherent swap partition OPUS WIN95 OSR -bit FAT WIN95 OSR -bit FAT, LBA-mapped WIN95: DOS 16-bit FAT, LBA-mapped WIN95: Extended partition, LBA-mapped OPUS (?) Hidden DOS 12-bit FAT Compaq config partition Hidden DOS 16-bit FAT =32M Hidden IFS (e.g., HPFS) AST SmartSleep Partition Unused (Claimed for Willowtech Photon COS) Hidden WIN95 OSR -bit FAT Hidden WIN95 OSR -bit FAT, LBA-mapped Hidden WIN -bit FAT, LBA-mapped Unused Reserved Unused Unused ...