Type of product Date of purchase Name Address Tel RO102

P URE PRO

DRINKING WATER SYSTEM

REVERSE OSMOSIS SYSTEM

USER'S MANUAL
Introduction of RO102 What is reverse osmosis Components & Selected filters Cartridge filters The parts of RO102 Tubing connection diagram Installation diagram Change filters Change membrane Operation regulations How to apply manual-flushing function FAQ Maintenance checking list Memo

PURE-PRO

Thank you very much for selecting Pure-Pro Water Corp. In order to bring the best use of your system, please read the user's manual carefully before installation and follow
RO102 Manual Flushing Membrane System

the regulations.

Introduction of RO102
RO102 - Manual Flushing Membrane System
Comply with unique RO technology and built-in manual flushing membrane, RO102 brings you premium water quality at your finger tips! With this special easy-operated built-in manual flushing membrane function that can extend the service life of the membrane and wash away carbon fines when changing filters. RO102 provides a quickest way to know the quality of your water. It is capable to remove over 95% of total dissolved solids, +99% of all organics, and +99% of all bacteria. RO105 meets all different water quality needs.
Maintenance checking list
Filters 1st stage 2nd stage 3rd stage Date 4th stage 5th stage Other items

Specifications

Production: 80 GPD / 302 LPD Available in 110Volt, 220Volt Or 240Volt (50/60Hz) with a transformer Safety approval: TUV (EN60950) & CE MARK Special technical designs (Patented No.068018. flush membrane ) 100% factory tested and sterilized ready for installation Operation pressure: 5 -80 PSI 3.2 gallons NSF standards water storage tank FDA approved polypropylene made flat cap housing (double O'ring) Safety Approval: TUV (EN60950) & CE MARK Automatic shut-off valve Flow restrictor Stainless steel check valve Long reach attractive faucet Feed water connector & deliver valve Drain saddle valve Four color coded 1/4 inch tubing for system connection Completely assembled & water leaking testing Dimensions: (cm) 47 (L) x 20 (W) x 42(H) - System (cm) 28 (L) x 35 (W) x 28(H) - Tank Weight: 12 Kg - System 4 Kg - Tank
Q: What is the guarantee on the Pure-Pro system ? The Pure-Pro System (excluding filters) is guaranteed for 1 year for material and workmanship. All defective parts will be replaced free within the first year under natural breakdown. The membrane has one year pro-rated guarantee.

What is reverse osmosis

Reverse osmosis was originally designed to make sea water drinkable for the navy. It is ideal for anyone on a low sodium diet. An R.O. membrane has a pore size much smaller than bacteria virus, or the cryptosporidium parasite. When functioning properly it will remove all microorganisms from tap water and produce sterile water. Reverse osmosis is the reversal of the natural flow of osmosis. In a water purification system, the goal is not to dilute the salt solution, but to separate the pure water from the salt and other contaminants. When the natural membrane in the opposite direction by application of pressure-thus the term REVERSE OSMOSIS. Through this process, we are able to produce pure water by screening out the salts and other contaminants.
Q: What factors affect the quantity and the quality of the water production? There are four major variables to consider: 1.Pressure-The greater the water pressure, the better water quantity and quality it produced. Water pressure of 60 PSI is ideal. 2.Temperature-76 F is the ideal water temperature for R.O. 40 F water will 0 cause the production of R.O. water to fall to half of that at 76 F. The maximum 0 water temperature recommended is 85 F. 3. Total Dissolved Solids (TDS) -The higher the amount of dissolved contaminants in the water, the lower the quantity of water produced. A high level of TOTAL DISSOLVED SOLIDS can be overcome with additional water pressure. 4. Membrane -Different membranes have different characteristics. Some produce more water than others; some have better contaminant rejection capabilities; some have greater resistance to chemical abrasion for longer life. Pure-Pro system includes RE1812-70 The Thin Film Composite (TFC) membranes combine the best of these characteristics and are considered the finest membrane in the world.

osmotic flow is reversed, water from the salt solution is forced to pass through the

Reverse Osmosis

Pressure Membrane
Q: Can the Pure-Pro system be connected to an extra faucet? It only takes a 1/4" tee and tubing to run the water to a refrigerator or a extra faucet. Some families run Pure-Pro system to all of their bathrooms. Water flow Q: What does the Pure-Pro series drinking water taste like? The taste of the Pure-Pro water depends on the amount of contaminants in the tap water originally. If 95% of dissolved minerals and chemicals are removed, the R.O. water may taste like distilled water (no minerals), bottled water (low mineral), or natural spring water (moderate mineral content).
Components & Selected filters

Components

How to apply manual-flushing function

Deliver-valve

Water supply connector

Drain saddle

When need to apply this function, simply turn manual flushing switch on. Flushing for 30 seconds then turn switch back.

Tank ball shut-off valve

Four color coded 1/4 inch tubing for system connection
Suggestion for applying manual flushing function
We suggest you apply manual flushing function when: A.This is the first time you start to use RO102 system. B.It's time to change filters.

Selected filters

P URE PRO Mineral Filter

UVC-LIGHTING

ULTRAVIOLET WATER STERILIZER
Applying manual flushing function regularly (once a week) is also recommended. *Cautions! Keep the system running when manual flushing function is on. Have manual flushing function on for 30 seconds.

Mineral cartridge filter

UV water sterilizer

Infra-Red Filter

Infra-red cartridge filter

TDS meter

Do remember to turn the manual flushing switch back after finishing flushing.

European ceramic faucet

3.2G water storage tank

Housing wrench

Operation regulation
A.With everything connected, turn on the water check for leaks. B.Make sure the storage tank shut-off valve is "OFF". Open the sink top faucet. C.Within a few minutes (up to 15) the water will start to run from the faucet slowly. D.Let the water run for at least 30 minutes. This flushes the carbon filters on first time use.

Cartridge Filters

Cartridge Filters Filter Description
This 5micron sediment filter is made of 100% pure polypropylene fibers. High capacity filter removes dusts, particles and rusts.

Service Life

6 Months

Stage 1

5 Micron Sediment Filter
the sink top faucet. F.Tank will now full of water (usually 2 to 3 hours) after the tank has filled. Open the sink top faucet and drain all water until the storage tank is empty and there is only a small flow from the sink top faucet.*** DO NOT USE FIRST TANK OF WATER.*** G.Close the sink top faucet. The system is now ready for use. H.Change filters regularly every 6 to 12 months and have the membrane checked annually.

Block Carbon Filter

Stage3

1 Micron Sediment Filter

This 1micron sediment filter is made of 100% pure polypropylene fibers. High capacity filter removes dusts, particles and rusts.

Stage 4

Caution 1.Do not use hot water (over 45 C)! 2.Do not freeze the machine! 3.Switch off electricity and water source if away for more than 5 days, and drain out pure water.

TFC Membrane

Made in USA. High rejection TFC type membrane with the capacity of producing 80 gallons per day. This membrane removes the following hard water contaminants that may be present in your water: lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite, nitrate, and selenium. NSF approved. This post carbon filter is designed to improve taste. It removes any residual impurities and odors from the tank and provides a finer conditioning of pure water.

4 Years

Stage 5

Post Carbon Filter

1 Year
E.After initial flushing, open the shut-off valve on the tank and close

Stage 2

This block carbon filter is composed of highperformance carbon that removes free chlorine, odor, organic contaminants, pesticides and chemicals that contributed to taste and odor.

The parts of RO102

1 Plug in electricity. 2 Turn on water source.

To RO system

Post carbon filter

Flow restrictor 300ml

RO membrane housing Manual flushing

Transformer

IN Pump OUT IN

3 Switch on water tank.

4 Pump starts to function.
The 3rd stage housing The 2nd stage housing

The 1st stage housing

Flow restrictor 300ml Auto shut-off valve High pressure protector To drain out tube To the faucet Transformer RO membrane housing Post carbon filter Manual flushing
5 Let the water run for at least 30 minutes. This flushes the carbon filters on first time use.

To the tank

Housing bracket white

Change membrane

1 Unplug electricity. 2 Turn off water source.

Tubing connection diagram
CONNECTING THE COLOR TUBING: A. Connect the WHITE tubing to the water supply connector. B. Connect the BLUE tubing to the sink top faucet. C. Connect the BLACK tubing to the drain saddle. D. Connect the RED tubing to the storage tank.

3 Switch off water tank.

4 Loose the Joco fitting anticlockwise.
5 Remove the membrane housing cap anticlockwise.

Faucet

6 Remove the membrane by a pincer.
7 Install the membrane by carefully pushing the spigot end into the socket at the far end of the housing until completely in.

Input water

Installation diagram

Input water :

Change filters
1 Prepare a housing wrench. 2 Turn off water source.

Install water tank :

Hand tighten plastic shut-off valve to tank. Then connect color tubing.

Deliver valve

To faucet

To water source pipe

Install European ceramic faucet :

Install drain saddle :

Drill a 1/4" hole into the drain pipe.

4 Unplug electricity.

5 Open housings clockwise with a wrench.
Mount drain saddle aligning holes.

Assemble membrane :

6 Put the replacement filters in the housings and double O' ring.
7 Drain out 1 Gallon of water to purify replacement filters.
1.Remove the membrane housing cap. 2.Replace the membrane.
Be sure tighten with O-ring to prevent from leaking.