PB-6 G X PB-336GX PB-536GX PB-736GX PB-936GX PB-1236GX PB-1836GX

PB-236GX PB- 8 36GX

PB- 6 36GX PB-1036GX

USER'S MANUAL

www.pyramidcaraudio.com

congratulations.

on your purchase of a Pyramid Royal Blue Series amplifier. This amplifier extends the Pyramid tradition into a totally new series of amps, designed from the ground up to deliver the power, performance and flexibility the modern car audio enthusiast demands.
When you check the list of features offered by the PB-136GX, PB-236GX, PB-336GX, PB-536GX, PB636GX, PB-736GX, PB-836GX, PB-936GX, PB-1036GX, PB-1236GX, PB-1836GX, youll know you made the right choice with a Pyramid Power amplifier.

table of contents

general features features and specifications
high level input connections
27-28 PB-636GX/PB-836GX/PB-1036GX

mono input connections

PB-136GX 6-7 PB-236GX 8-9 10-15 PB-336GX/PB-536GX/PB-736GX PB-936GX/PB-1236GX/PB-1836GX PB-636GX 16-17 PB-836GX/PB-1036GX 18-19

electrical connections

29 PB-636GX/PB-836GX/PB-1036GX
high level mono input connections
30 PB-636GX/PB-836GX/PB-1036GX

speaker connections

20-21 PB-136GX/PB-236GX/PB-336GX PB-536GX/PB-636GX/PB-736GX PB-836GX/PB-936GX/PB-1036GX PB-1236GX/PB-1836GX

stereo input connections

PB-136GX/PB-336GX 31 PB-536GX/PB-736GX PB-936GX/PB-1236GX/PB-1836GX
PB-236GX/PB-636GX 32-33 PB-836GX/PB-1036GX
mounting and installation protection circuitry and troubleshooting precautions
PB-136GX/PB-336GX/PB-536GX 22-23 PB-736GX/PB-936GX/PB-1236GX PB-1836GX
PB-336GX/PB-536GX 24 PB-736GX/PB-936GX PB-1236GX/PB-1836GX
2/4 channel input connections

PB-236GX 25-26

general features

PB-136GX

120 Watts x 2 Output Variable Input Level (Gain) Control Remote Turn On/Off Gold Plated RCA Inputs High Level MOLEX Input Power ON LED Indicator S/N Ratio: > 95 dB THD: <0.04% Thermal Protection Overload Protection Short Circuit Protection Anti-Thump Turn-On
High Performance 240 Watt 2 Channel Amplifier

PB-236GX

100 Watts x 4 Output Variable Input Level (Gain) Control Remote Turn On/Off Gold Plated RCA Inputs High Level MOLEX Input Power ON LED Indicator S/N Ratio: > 95 dB THD: <0.04% Thermal Protection Overload Protection Short Circuit Protection Anti-Thump Turn-On
High Performance 400 Watt 4 Channel Amplifier

PB-336GX

High Performance 600 Watt 2 Channel Bridgeable MOSFET Amplifier
300 Watts x 2 Output 600 Watts x 1 Bridged Output Variable Hi/Lo Electronic Crossover Network Variable Bass Boost (0 - +18 dB @ 60Hz) Variable Input Level (Gain) Control Remote Turn On/Off Gold Plated RCA Inputs High Level MOLEX Input Power ON LED Indicator LED Protection Indicator S/N Ratio: > 95 dB THD: <0.04% Thermal Protection Overload Protection Short Circuit Protection Anti-Thump Turn-On

PB-536GX

High Performance 800 Watt 2 Channel Bridgeable MOSFET Amplifier

PB-636GX

High Performance 1000 Watt 4 Channel Bridgeable MOSFET Amplifier

PB-736GX

High Performance 1000 Watt 2 Channel Bridgeable MOSFET Amplifier
400 Watts x 2 Output 800W x 1 Bridged Output Variable Hi/Lo Electronic Crossover Network Variable Bass Boost (0 - +18 dB @ 60Hz) Variable Input Level (Gain) Control Remote Turn On/Off Gold Plated RCA Inputs High Level MOLEX Inputs Power ON LED Indicator LED Protection Indicator Remote Bass Boost S/N Ratio: > 95 dB THD: <0.04% Thermal Protection Overload Protection Short Circuit Protection Anti-Thump Turn-On

250 Watts x 4 Output 500W x 2 Bridged Output (250W x 2 + 500W x 1) Dual Variable Hi/Lo Electronic Crossover Network Dual Variable Bass Boost (0 - +18 dB @ 60Hz) Variable Input Level (Gain) Control Remote Turn On/Off Gold Plated RCA Inputs High Level MOLEX Inputs Power ON LED Indicator LED Protection Indicator S/N Ratio: > 95 dB THD: <0.04% Thermal Protection Overload Protection Short Circuit Protection Anti-Thump Turn-On Tri-Mode Configurable
500 Watts x 2 Output 1000W x 1 Bridged Output Variable Hi/Lo Electronic Crossover Network Variable Bass Boost (0 - +18 dB @ 60Hz) Variable Input Level (Gain) Control Remote Turn On/Off Gold Plated RCA Inputs High Level MOLEX Inputs Power ON LED Indicator LED Protection Indicator Remote Bass Boost S/N Ratio: > 95 dB THD: <0.04% Thermal Protection Overload Protection Short Circuit Protection Anti-Thump Turn-On

PB-836GX

High Performance 1600 Watt 4 Channel Bridgeable MOSFET Amplifier

PB-936GX

High Performance 1200 Watt 2 Channel Bridgeable MOSFET Amplifier

PB-1036GX

High Performance 2000 Watt 4 Channel Bridgeable MOSFET Amplifier
400 Watts x 4 Output 800 Watts x 2 Bridged Output(400Wx2+800Wx1) Dual Variable Hi/Lo Electronic Crossover Network Dual Variable Bass Boost (0 - +18 dB @ 60Hz) Variable Input Level (Gain) Control Remote Turn On/Off Gold Plated RCA Inputs High Level MOLEX Input Power ON LED Indicator LED Protection Indicator Remote Bass Boost S/N Ratio: > 95 dB THD: <0.04% Thermal Protection Overload Protection Short Circuit Protection Anti-Thump Turn-On
600 Watts x 2 Output 1200 Watts x 1 Bridged Output Variable Hi/Lo Electronic Crossover Network Variable Bass Boost (0 - +18 dB @ 60Hz) Variable Input Level (Gain) Control Remote Turn On/Off Gold Plated RCA Inputs High Level MOLEX Input Power ON LED Indicator LED Protection Indicator Remote Bass Boost S/N Ratio: > 95 dB THD: <0.04% Thermal Protection Overload Protection Short Circuit Protection Anti-Thump Turn-On
500 Watts x 4 Output 1000 Watts x 2 Bridged Output(500Wx2+1000Wx1) Dual Variable Hi/Lo Electronic Crossover Network Dual Variable Bass Boost (0 - +18 dB @ 60Hz) Variable Input Level (Gain) Control Remote Turn On/Off Gold Plated RCA Inputs High Level MOLEX Input Power ON LED Indicator LED Protection Indicator Remote Bass Boost S/N Ratio: > 95 dB THD: <0.04% Thermal Protection Overload Protection Short Circuit Protection Anti-Thump Turn-On

Tri-Mode Configurable

PB-1236GX
High Performance 1600 Watt 2 Channel Bridgeable MOSFET Amplifier

PB-1836GX

High Performance 2400 Watt 2 Channel Bridgeable MOSFET Amplifier
800 Watts x 2 Output 1600W x 1 Bridged Output Variable Hi/Lo Electronic Crossover Network Variable Bass Boost (0 - +18 dB @ 60Hz) Variable Input Level (Gain) Control Remote Turn On/Off Gold Plated RCA Inputs High Level MOLEX Inputs Power ON LED Indicator LED Protection Indicator

Remote Bass Boost

1200 Watts x 2 Output 2400W x 1 Bridged Output Variable Hi/Lo Electronic Crossover Network Variable Bass Boost (0 - +18 dB @ 60Hz) Variable Input Level (Gain) Control Remote Turn On/Off Gold Plated RCA Inputs High Level MOLEX Inputs Power ON LED Indicator LED Protection Indicator
S/N Ratio: > 95 dB THD: <0.04% Thermal Protection Overload Protection Short Circuit Protection Anti-Thump Turn-On

features and controls

2 ch amp PB-136GX

pb-136GX

CH R CH L
2 CHANNEL POWER AMPLIFIER

LOW IN

high level inputs low level inputs input level control

+ - - +

power LED

REM GROUND +12V BATT

power terminals

power fuse

features and specifications
input level control use this control to match the outputs of your head unit to the amplifier. Starting with your head unit set at about the 2 oclock position, increase the amp level control until distortion begins to occur, and reduce slightly from this point. low level inputs this amp features gold-plated RCA input jacks for high impedance input. Use these with car stereo output which uses RCA-type connector cables. high level inputs if your car stereo lacks RCA-type output jacks, you may connect speaker output leads to these input connectors. power LED this indicator is illuminated when power is applied. power fuse the fuse protects the amplifier and your cars electrical system from short circuit conditions. power terminals use these connectors to deliver power, ground and remote turn-on control to the amplifier. speaker connections these terminals are 14K gold plated to guarantee high conductivity and minimum signal loss.
output power @ 14.4v DC, 1KHz RMS Power @ 4 Ohms Maximum Power Output frequency response input impedance low level inputs high level inputs input sensitivity low level inputs high level inputs power supply voltage matching speaker impedance stereo mode bridged mode maximum current draw dimensions (W x H x L) mm inches

30 Watts x Watts x Hz-30 KHz 10K Ohms 100 Ohms 250mV 2.5V 14.4V DC Neg. Ground (10.5-16V) 2-4 Ohms 5A 278 x 81 x 209 10.9 x 3.2 x 8.25

4 ch amp PB-236GX

pb-236GX

CH4 CH3

4 CHANNEL POWER AMPLIFIER

CH 4 CH 3

CH 2 CH 1

CH2 CH1

30 Watts x Watts x 4
15 Hz-30 KHz 10K Ohms 100 Ohms 250mV 2.5V 14.4V DC Neg. Ground (10.5-16V) 2-4 Ohms
278 x 81 x 235 10.9 x 3.2 x 9.25

pb-336GX pb-536GX

power LED protection LED Remote Bass Boost

(PB-336GX Without )

2 ch amp PB-336GX PB-536GX
2 CHANNEL MOSFET AMPLIFIER

REMOTE BASS BOOST

PROTECT POWER
LPF BASS BOOST LEVEL FREQ. HI IN

80 Hz 2.5k 35 Hz +18db

HPF LPF FULL
high pass frequency control low pass frequency control bass boost level crossover mode selector

BRIDGED

crossover mode selector when used with normal, full range systems, set this switch to FULL. If you wish to use the internal crossover to power a driver of specific frequency range, use the LOWPASS or HIGHPASS settings. use this control to match the outputs of your head unit to the amplifier. Starting with your head unit set at about the 2 oclock position, increase the amp level control until distortion begins to occur, and reduce slightly from this point. when the crossover selector switch is in low pass mode, this control sets the upper frequency limit for audio program sent to the speakers. when the crossover selector switch is in high pass mode, this control sets the lower frequency limit for audio program sent to the speakers. Plug in the Remote Bass Boost Control wire in here. this control permits adjustment of the bass level up to an increase of approximately 18 dB. this amp features gold-plated RCA input jacks for high impedance input. Use these with car stereo output which uses RCA-type connector cables. if your car stereo lacks RCA-type output jacks, you may connect speaker output leads to these input connectors. this indicator is illuminated when power is applied. this indicator is illuminated when built-in protection circuitry is activated. the fuse protects the amplifier and your cars electrical system from short circuit conditions. use these connectors to deliver power, ground and remote turn-on control to the amplifier. these terminals are 14K gold plated to guarantee high conductivity and minimum signal loss. input level control

40 Watts x Watts x Watts x Watts x Watts x Watts x 2
output power @ 14.4v DC, 1KHz RMS Power @ 4 Ohms RMS Power @ 2 Ohms Maximum Power Output frequency response input impedance low level inputs high level inputs input sensitivity low level inputs high level inputs power supply voltage matching speaker impedance stereo mode bridged mode maximum current draw dimensions (W x H x L) mm inches
15 Hz-30 KHz 10K Ohms 100 Ohms 250mV 2.5V 14.4V DC Neg. Ground (10.5-16V) 2-4 Ohms 4-8 Ohms 15A
278 x 81 x 209 10.9 x 3.2x 8.25
low pass frequency control high pass frequency control Remote Bass Boost bass boost level control low level inputs high level inputs power LED protection LED power fuse power terminals speaker connections
278 x 81 x 235 10.9 x 3.2x 9.25
2 ch amp PB-736GX PB-936GX PB-1236GX
pb-736GX pb-936GX pb-1236GX
power LED protection LED Remote Bass Boost high pass frequency control low pass frequency control bass boost level crossover mode selector
crossover mode selectors when used with normal, full range systems, set these switches to FULL. If you wish to use the internal crossovers to power a driver of specific frequency range, use the LOWPASS or HIGHPASS settings. use these controls to match the outputs of your head unit to the amplifier. Starting with your head unit set at about the 2 oclock position, increase the amp level controls until distortion begins to occur, and reduce slightly from this point. when one or both of the crossover selector switches is in low pass mode, one can set the upper frequency limit for audio program sent to the speakers. when the one or both of crossover selector switch is in high pass mode, one can set the lower frequency limit for audio program sent to the speakers. Plug in the Remote Bass Boost Control wire in here. this control permits adjustment of the bass level up to an increase of approximately 18 dB in either or both pairs of channels. this amp features gold-plated RCA input jacks for high impedance input. Use these with car stereo output which uses RCA-type connector cables. if your car stereo lacks RCA-type output jacks, you may connect speaker output leads to these input connectors. this indicator is illuminated when power is applied. this indicator is illuminated when built-in protection circuitry is activated. the fuse protects the amplifier and your cars electrical system from short circuit conditions. use these connectors to deliver power, ground and remote turn-on control to the amplifier. these terminals are 14K gold plated to guarantee high conductivity and minimum signal loss.
2 ch amp PB-736GX PB-936GX

input level controls

75 Watts x Watts x Watts x 2
90 Watts x Watts x Watts x 2
15 Hz-30 KHz 10K Ohms 100 Ohms 250mV 2.5V 14.4V DC Neg. Ground (10.5-16V) 2-4 Ohms 4-8 Ohms 20 A 278 x 81 x 305 10.9 x 3.2 x A 278 x 81 x 343 10.9 x 3.2 x 13.5

low pass frequency controls
high pass frequency controls
Remote Bass Boost bass boost level controls low level inputs high level inputs power LED protection LED power fuse power terminals speaker connections

2 ch amp PB 1836GX

pb-1836GX
2 ch amp PB-1236GX PB-1836GX
125 Watts x Watts x Watts x 2
150 Watts x Watts x Watts x 2
15 Hz-30 KHz 10K Ohms 100 Ohms 250mV 2.5V 14.4V DC Neg. Ground (10.5-16V) 2-4 Ohms 4-8 Ohms 30 A 278 x 81 x 381 10.9 x 3.2 x A 278 x 81 x 432 10.9 x 3.2 x 17

4 ch amp PB-636GX

ch 3/4 input level control ch 1/2 input level control

pb-636GX

ch 3/4 high level inputs

BASS BOOST

HPF PROTECT POWER

ch 1/2 high level inputs

+18db 35

400 80

2.5k 35

HPF LPF MIN FULL

CHANNEL 3/4

CHANNEL 1/2

4 CHANNEL MOSFET AMPLIFIER
ch 3/4 low level inputs ch 3/4 crossover mode selector switch ch 3/4 bass boost level control ch 3/4 low pass frequency control ch 3/4 high pass frequency control

protection LED power LED

ch 1/2 low level inputs ch 1/2 crossover mode selector switch ch 1/2 bass boost level control ch 1/2 low pass frequency control ch 1/2 high pass frequency control
dual crossover mode selectors when used with normal, full range systems, set these switches to FULL. If you wish to use the internal crossovers to power a driver of specific frequency range, use the LOWPASS or HIGHPASS settings. dual input level controls use these controls to match the outputs of your head unit to the amplifier. Starting with your head unit set at about the 2 oclock position, increase the amp level controls until distortion begins to occur, and reduce slightly from this point. dual low pass frequency controls when one or both of the crossover selector switches is in low pass mode, one can set the upper frequency limit for audio program sent to the speakers. dual high pass frequency controls when the one or both of crossover selector switch is in high pass mode, one can set the lower frequency limit for audio program sent to the speakers. dual bass boost level controls this control permits adjustment of the bass level up to an increase of approximately 18 dB in either or both pairs of channels. low level inputs this amp features gold-plated RCA input jacks for high impedance input. Use these with car stereo output which uses RCA-type connector cables. high level inputs if your car stereo lacks RCA-type output jacks, you may connect speaker output leads to these input connectors. power LED this indicator is illuminated when power is applied. protection LED this indicator is illuminated when built-in protection circuitry is activated. power fuse the fuse protects the amplifier and your cars electrical system from short circuit conditions. power terminals use these connectors to deliver power, ground and remote turn-on control to the amplifier. speaker connections these terminals are 14K gold plated to guarantee high conductivity and minimum signal loss.

35 Watts x Watts x Watts x 4
15 Hz-30 KHz 10K Ohms 100 Ohms 250mV 2.5V 14.4V DC Neg. Ground (10.5-16V) 2-4 Ohms 4-8 Ohms
278 x 81 x 305 10.9 x3.2 x 12

pb-836GX pb-1036GX

ch 3/4 low level inputs ch 3/4 crossover mode selector switch ch 3/4 bass boost level control ch 3/4 low pass frequency control ch 3/4 high pass frequency control ch 3/4 input level control ch 3/4 high level inputs
4 ch amp PB-836GX PB-1036GX
ch 1/2 input level control

REMOTE BASS BOOST(CH3/4)

power LED protection LED
dual crossover mode selectors when used with normal, full range systems, set these switches to FULL. If you wish to use the internal crossovers to power a driver of specific frequency range, use the LOWPASS or HIGHPASS settings. use these controls to match the outputs of your head unit to the amplifier. Starting with your head unit set at about the 2 oclock position, increase the amp level controls until distortion begins to occur, and reduce slightly from this point. when one or both of the crossover selector switches is in low pass mode, one can set the upper frequency limit for audio program sent to the speakers. when the one or both of crossover selector switch is in high pass mode, one can set the lower frequency limit for audio program sent to the speakers. Plug in the Remote Bass Boost Control wire in here. this control permits adjustment of the bass level up to an increase of approximately 18 dB in either or both pairs of channels. this amp features gold-plated RCA input jacks for high impedance input. Use these with car stereo output which uses RCA-type connector cables. if your car stereo lacks RCA-type output jacks, you may connect speaker output leads to these input connectors. this indicator is illuminated when power is applied. this indicator is illuminated when built-in protection circuitry is activated. the fuse protects the amplifier and your cars electrical system from short circuit conditions. use these connectors to deliver power, ground and remote turn-on control to the amplifier. these terminals are 14K gold plated to guarantee high conductivity and minimum signal loss.
75 Watts x Watts x Watts x 4
dual input level controls
50 Watts x Watts x Watts x 4
dual low pass frequency controls
dual high pass frequency controls
CH 3/4 Remote Bass Boost dual bass boost level controls low level inputs high level inputs power LED protection LED power fuse power terminals speaker connections

pb-136GX pb-336GX pb-536GX pb-736GX pb-936GX pb-1236GX pb-1836GX

12V battery

L R FUSE REM GROUND +12V BATT
2 ch amp PB-136GX PB-336GX PB-536GX PB-736GX PB-936GX PB-1236GX PB-1836GX

head unit

to remote turn-on +12V
pb-236GX pb-636GX pb-836GX pb-1036GX

CH1 CH2 CH3 CH4

FUSE REM GROUND +12V BATT
4 ch amp PB-236GX PB-636GX PB-836GX PB-1036GX

low level inputs

L/R Audio Outputs

high level inputs

wiring harness

from speaker terminals

PLEASE NOTE! If using high level inputs, do not use the low level RCA inputs at the same time!
2 ch amp PB-336GX PB-536GX PB-736GX PB-936GX PB-1236GX PB-1836GX
pb-336GX pb-536GX pb-736GX pb-936GX pb-1236GX pb-1836GX
head unit L/R Audio Outputs Y Adaptors
To a second amplifier Y Adaptors

To a second amplifier

wiring harness from speaker terminals
4 CH input connections using

L/R REAR Audio Outputs

2 CH input connections using

L/R FRONT Audio Outputs

Y adaptors
4 CH floating ground connections

ORANGE

BLACK BLACK
4 CH harness wiring for common ground connections

CH 3/4 CH 1/2

4 CH Stereo input connections using
4 ch amp PB-636GX PB-836GX PB-1036GX

Stereo input connections

MIN MAX HPF LPF FULL 0 +18db 35 Hz Hz 2.5k 80 Hz 2.5k 35 Hz 400 0

HPF LPF MIN +18db FULL

L/R FRONT Audio Outputs L/R REAR Audio Outputs
2 CH Stereo input connections using
MIN MAX HPF LPF FULL 0 +18db 35 Hz Hz 2.5k 80 Hz 2.5k 35 Hz +18db
high level Stereo input connections
4 CH floating ground connections 4 CH floating ground connections
pb-636GX pb-836GX pb-1036GX

CH 3/4 REAR

CH 1/2
4 CH mono input connections using
head unit LEFT FRONT Audio Outputs RIGHT FRONT Audio Outputs RIGHT REAR Audio Outputs LEFT REAR Audio Outputs
2 CH mono input connections using

CH 3/4

Stereo Output Mode
2 ch amp PB-136GX PB-336GX PB-536GX PB-736G PB-936GX PB-1236GX PB-1836GX

LEFT speaker

RIGHT speaker
Bridged Mono Output Mode (PB-136GX WITHOUT)

speaker

MINIMUM SPEAKER IMPEDANCE 4 OHMS!

4 CH Output Mode

FUSE REM GROUND

+12V BATT

L FRONT speakers

R REAR speakers

Bridged Dual Mono Output Mode (PB-236GX WITHOUT)

speakers L R

2 CH Bridged Output Mode with Subwoofer Output

R L SUBWOOFER SPEAKERS