Parrot 3400 LS GPS with Qtek 8100 and Navigon 5

Navigon 5 Qtek 8100

Features
GPS and Handsfree connection at the same time. Voice navigation instructions through PDA headspeakers. Automatic switch between GPS and phone applications. Voice navigation instructions are not played during a call Automatic GPS connection

Setup Procedures

Setup Procedure.
Navigon 5 Setup Procedure.

Step 1 - Setup Procedure

Parrot 3400 LS GPS start screen

Go to the SETTINGS menu

In the car kit, review the PAIRED DEVICES / select OTHER PHONES menu. The car kit will display a PIN code.
In the START menu, please select the CONFIGURATIONS folder.
Select the BT SERIALPORTSETUP icon
Check the OUTBOUND COM PORT 7 and please press on DONE
You will select a GPS device, please press on OK
Please make sure BLUETOOTH is ON
Press on MENU and select the DEVICES command
You will select a new Bluetooth device
Please press on MENU and then select NEW
The phone is searching for Bluetooth devices in range
Please select Parrot 3400 LS
Enter the Pin code displayed by the car kit and select DONE
Please accept to define the Parrot 3400LS as a HandsFree device
HandsFree connexion is establihed
Qtek 8100 and Parrot 3400 LS are connected
Step 2 NAVIGON Setup Procedure
Navigate to the Parrot CK3400 GPS menu
Consult the ACTIVATE / DEACTIVATE menu of the Parrot 3400 LS GPS
Make sure the GPS feature is activated
Press on the car kits red button. Your car kit and your mobile phone will be disconnected
Please start the MOBILE NAVIGATOR software

NAVIGONs start screen

Select the SETTINGS icon
Step 2 - NAVIGON Setup Procedure

Select the GPS command

Please select MANUAL SETTINGS
Please set the receiver model as OTHER GPS RECEIVER
Please set the Interface with the COM7
Please set the Baud option Select the NAVIGATION icon at 9600
Select ADDRESS to define a destination

Set your address

Select START NAVIGATION
Navigation with Navigon 5

Parrot CK3300 with Qtek 8100 and Navigon 5
Tested with ROM operator 2.0.32.42

Navigon 5 Qtek 8100

Features
GPS and Handsfree connection at the same time. Voice navigation instructions through PDA headspeakers. Automatic switch between GPS and phone applications. Voice navigation instructions are not played during a call Automatic GPS connection

SetUp Procedures

Setup Procedure. Navigon Setup Procedure.

Step 1 - Setup Procedure

CK3300s start screen
From the Smartphones Today screen, please consult the START menu
In the START menu, please select the ADVANCED CONFIG. file.
Select the BT SERIALPORTSETUP icon
Check the OUTBOUND COM PORT 7 and please press on DONE
You will select a GPS device, please press on OK
Please make sure BLUETOOTH is ON
Press on MENU and select the DEVICES command
You will select a new Bluetooth device
Please press on MENU and then select NEW
The phone is searching for Bluetooth devices in range
Please select Parrot CK3300
Please enter 1234 as PASSKEY and select DONE
The pairing is completed: press on DONE
Please accept to define the CK3300 as a HandsFree device
HandsFree connexion is done
Navigate to the Parrot CK3300 GPS menu
Then consult the ACTIVATE / DEACTIVATE menu of the CK3300
Activate the GPS function of the kit
CK3300s GPS function is now activated
Step 2 NAVIGON Setup Procedure
Please start the MOBILE NAVIGATOR software

NAVIGONs start screen

Select the SETTINGS icon
Step 2 - NAVIGON Setup Procedure

Select the GPS command

Please select MANUAL SETTINGS
Please set the receiver model as OTHER GPS RECEIVER
Please set the Interface with the COM7
Please set the Baud option at 9600
Select the NAVIGATION icon
Select ADDRESS to define a destination

Set your address

Select START NAVIGATION
Your GPS system is set up