Uso e manutenzione Emploi et entretien Gebrauch und Instandhaltung Use and maintenance Uso y manutencin Uso e manuteno

SILVIA

e pr s

ec ot s

les Sa & Se rvi
Macchina per caff Machine caf Kaffeemaschinen Coffee machine Mquina para caf Mquina para caf
20010 Villastanza di Parabiago (MI) Viale della Repubblica 40
DICHIARAZIONE DI CONFORMITA CE - DECLARATION DE CONFORMITE CE EG-KONFORMITTSERKLRUNG - EC DECLARATION OF CONFORMITY DECLARACIN DE CONFORMIDAD CE - DECLARAO DE CONFORMIDADE CE Noi
RANCILIO Macchine per caff S.p.A.
Dichiariamo sotto la nostra responsabilit che il prodotto: Macchina per caff per uso familiare Dclarons, sous notre responsabilit, que le produit : Machine caf dutilisation domestique Wir erklren auf unsere Verantwortung, da das Produkt: Kaffeemaschine fr Hausgebrauch Declare under our responsibility that the product: Espresso coffee makers for household use Declaramos bajo nuestra responsabilidad que el producto: Mquina para caf de uso familiar Declaramos sob a nossa responsabilidade que o produto: Mquina para caf para uso familiar
al quale riferita questa Dichiarazione, secondo quanto prescritto dalle direttive specifiche: laquelle se rfre cette dclaration, selon les prescriptions des directives spcifiques. auf das sich diese Erklrung bezieht, Entsprechend der Vorschriften der spezifischen Richtlinien. to which this declaration relates is, according to the provisions of the specific directives: al cual se refiere esta Declaracin, de acuerdo con lo prescrito por las especficas directivas:
ao qual se refere esta Declarao, segundo quanto prescrito pelas especficas diretrizes:
73/23/CEE, 93/68/CEE Direttiva Bassa Tensione - Direttiva Basse Tension - Niederspannungsrichtline - Low Voltage Directive - Directiva Baja Tensin - Diretriz Baixa Tenso: 89/336/CEE, 93/68/CEE, 92/31/CEE Direttiva EMC - Direttiva EMC - Richtlinie EMC - EMC Directive - Directiva EMC - Diretriz EMC
conforme alle seguenti norme: conforme aux normes suivantes : In bereinstimmung mit den folgenden Normen: it complies with the following norms: es conforme a las siguientes normas: conforme as seguintes normas:
EN 60335-1, EN 60335-2-15, EN 55014-1, EN 55014-2, EN61000-3-2, EN 61000-3-3, EN50366 Norme EN armonizzate - Normes EN harmonises - Harmonisierte EN-Norme - Harmonized EN norms Normas EN armonizadas - Normes EN Harmonia
Il presidente The president
La presente dichiarazione perde la sua validit se la macchina viene modificata senza la nostra espressa autorizzazione. La prsente dclaration perd sa validit ds lors que la machine est modifie sans notre expresse autorisation. Die vorliegende Erklrung verliert ihre Gltigkeit, wenn die Maschine ohne unsere ausdrckliche Genehmigung verndert wird. The present declaration will become invalid should the machine be modified without our specific authorization. La presente declaracin pierde su validez si la mquina es modificada sin nuestra expresa autorizacin. A presente declarao perde a validade se a mquina modificada sem a nossa expressa autorizao. MD-CER.02 rev.0.0 del 16/06/05

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

IT FR DE EN ES PT
ITALIANO FRANCAIS DEUTSCH ENGLISH ESPAOL PORTUGUS

9 - - - - - - 50

ENGLISH
CONTENTS Machine identification data. 31 1. 2. General safety rules.. 31 Description.. 32 2.1. Assembling information. 32 2.2. Protections.. 32 2.3. Aerial noise.. 32 2.4. Vibrations... 32 Technical data.. 32 Intended Use... 33 Transport.. 33 5.1. Packaging.. 33 Installation.. 33 6.1 Control description.. 34 Starting up.. 34 7.1. Filling.. 34 Funtion.. 34 8.1. Machine heating.. 35 8.2. Coffee preparation. 35 8.3. Steam delivery.. 35 8.4. To steam milk.. 35 8.5. Hot water delivery.. 35 8.6. Refilling water in the boiler. 35 8.7. Pump pressure adjustment. 35 Maintenance.. 36 9.1. Daily.. 36 9.2. Periodically or after a period of intensive machine use. 36
SCHEMI ELETTRICI SCHEMAS ELECTRIQUES SCHALTPLANE WIRING DIAGRAMS ESQUEMAS ELECTRICOS ESQUEMAS ELTRICOS

51 - 52

10. Placing out of action.. 36 10.1. Temporary.. 36 10.2. Definitive.. 36 11. Possible problems.. 36

PRODUCT RANGE: MODEL:

Coffee machine SILVIA

1. GENERAL SAFETY RULES

Any traces of coffee are due to testing of the machine The packing elements (plastic bags, expanded polystyrene, nails, cardboard, etc.) must not be left within the reach of children, as they are potential sources of danger. Check that the data on the machine corresponds to those of the electrical supply network, before connecting the equipment. It is advisable to unwind the supply cable for the whole length to avoid twisting or damages. Do not place the cable near water, liquids or heat sources. The cable must not be damaged (should the cable be damaged, contact qualified personnel to replace it). It is inadvisable to use adapters, multiple sockets and/or extensions. When their use is indispensable, only products with certificate of quality (e.g. UL, etc.) may be used. Check that the voltage capacity limit indicated on the adapters exceeds the absorption capacity (A = ampere) of the equipment. When in doubt, request an accurate check of the connections by qualified personnel. The wiring system must comply with the following safety regulations: - efficient grounding - section of conductors suitable for absorption capacity - efficient ear th leakage protection circuit breaker. Do not install the machine near heat sources (oven, cooking stove, fireplace, etc.) or in conditions in which the temperature may not go below 41F. IT MUST BE PROTECTED AGAINST FREEZING CONDITIONS. Do not leave the machine exposed to atmospheric agents (rain, sun, etc.) and do not install in damp rooms such as bathrooms. In the event of parts replacement, request original spares from an authorized retailer or dealer. Keep the packed machine in a dry place, not exposed to atmospheric agents and in conditions in which the temperature will fall below 41F. Do not stack more than three items of the same kind. Do not place heavy items on the packaging. Erroneous installation may cause damage to people and things for which the manufacturer cannot be considered responsible.

The label illustrated on the cover of this instruction manual corresponds to the identification label placed on the machine. Label data (Fig.1) 13 Manufacturer Model and version Voltage EC conformity mark (if required) Serial number Boiler data Machine total absorption Protection level Motor power Heating element power Frequency Conformity marks Year of manufacture
Symbols Warning symbols. The instructions which refer to this symbol must be followed with great care in order to avoid accidents or damage to the machine. This manual is an integral and essential part of the product and must be delivered to the user. The warnings contained in it must be read carefully, as they supply important indications related to the safety of installation, use and maintenance. Keep this manual for future reference.

2. DESCRIPTION

2.1 Assembling information
The machine is composed of a central structure for obtaining espresso and steam/hot water. The body is made up of a supporting structure in painted iron, suitably covered with stainless-steel panels.

2.2 Protections

Water boiler equipped with spring mechanical valves for over-pressures. Electro-magnetic pump equipped with thermal protection. All the moving and heating parts are inside the machine.
Key (Fig.2) : 1 Main power switch 2 Boiler resistance light 3 Coffee delivery switch 4 Hot water delivery switch 5 Steam delivery switch 6 Steam/water knob 7 Steam wand 8 Water tank 9 Lid 10 Drip tray 11 Discharge drawer 12 Coffee dispensing unit (group head) 13 Portafilter Accessories: 14 One two-cup portafilter with double spout 15 One one-cup filter basket 16 Coffee tamper 17 Coffee measuring scoop

2.3 Aerial noise

The noise level does not generally exceed 70dB(A) when the machine is in operation.

2.4 Vibrations

The machine is supplied with rubber vibration-suppressing feet. In normal working conditions, the machine does not produce vibrations harmful to the operator and/or the environment.

3. TECHNICAL DATA (Fig.3)
Machine dimensions Packing dimensions Packing volume Net weight Gross weight with packing No. of items Electromagnetic pump Electricity supply Resistance Water tank capacity Working place temperature A-290 B-325 H-340mm A-430 B-340 H-450 0,06mkg 15 kg 1 48W plate data plate data ~2l +5 +45 C

4. INTENDED USE

The machine has been designed and manufactured to obtain espresso and other hot beverages (tea, cappuccino, etc.). This machine is only intended for the purposes for which it was designed. Any other use is to be considered unsuitable and therefore dangerous. The user must always follow the indications contained in this manual. If the machine is not working properly, switch it off and do not attempt any direct repair. For service, contact the retailer. The user must not: Touch the hot surfaces of the machine with his hands, but use only proper the controls; Transport the machine or carry out maintenance operations with the plug connected and when the machine is warm; Use the machine if the supply cable is damaged Touch the machine with wet or damp hands or feet Overturn or place the packaging on one side Wash the machine with water or vapour jet Dip the machine in water or other liquid Use the machine when there are children in close proximity Allow the machine to be used by children or incapable persons Obstruct the aspirations or heat dissipation grills Place containers with liquids on the machine It is forbidden to install or use the machine if it is wet or damp. It is always necessary to request an accurate check by qualified personnel in order to find any possible damages to the electric components.

5. TRANSPORT

5.1. Packaging
The machine must always be transported in the correct position following the instructions on the cardboard box. Do not turn over the machine or lay it down on its side. The box also contains separate accessories and technical documentation which must be saved for further consultation. Open the top part of the packaging, remove the accessories and then remove the machine from its packaging. Check if the machine, the accessories, the electric cable and the plug are in perfect condition. Should one of these parts be damaged, immediately contact the retailer. The packing elements (plastic bags, expanded polystyrene, nails, cardboard, etc.) must not be left within reach of children as they are potential sources of danger. Do not dispose of the packing elements in the environment; consign them to firms authorized for their disposal.

6. INSTALLATION

The machine is delivered ready to be installed in accordance to the label data. Ensure that the electrical supply system has the same features as the machine. The electrical supply system must be equipped with a GFI (ground-fault interrupt) or a general automatic switch with an efficient grounding system. Should there be no electrical protection element, have a singlepole switch installed by qualified personnel, as outlined by the current safety regulations with a contact opening distance of either equivalent or over 3 mm. The grounding of the appliance is mandatory. The manufacturer declines all responsibility in the event of failure to respect the accident prevention norms. Take care not to damage the supply cable by placing undue weight upon it. Do not disconnect the machine by pulling the cable, but instead by gripping the plug. 33
This machine may be used only for the purposes for which it was designed. It cannot be used to dispense products other than coffee or any non food products. The manufacturer cannot be held responsible for any damage caused by unsuitable, erroneous or irrational use of the machine.

7. STARTING UP

In order to prevent problems relating to operation, supply and maintenance, the machine is not to be positioned in any recesses or similar difficult positions. The machine must be placed on a completely level surface, that is both dry and sufficiently stable and at a height of 80 cm from the ground. Position the machine and connect the plug to the power outlet.

7.1. Filling (Fig. 2)

Fill the water tank before using the machine and when it is necessary (always switch off the machine) Open the lid (9) and pour about 2 litres of water into the tank (use drinking water, softened if possible). Close the lid (9) making sure that the rubber water delivery tube (18) is at the bottom of the tank. Fill the water tank before using the machine, after a long period of inactivity or when the tank is empty. Detach the portafilter (13), turn the steam knob counter-clockwise to open the steam tap (6), then press the main switch (1) together with the coffee delivery switch (3). When the water comes out of the steam wand (7), turn the steam knob clockwise to close the steam tap (6) and allow water to escape from group head (12) for a few seconds, then switch off the coffee delivery switch (3). If water fails to come out after 30 seconds repeat the operation. Insert the portafilter (13) and wait until the machine heats up and reaches the correct temperature. On using the machine for the first time, allow about a litre of water to go through the machine in order to rinse the unit.

6.1. Control description (Fig.4)
1. Main power switch with orange on/off indicator light: On pressing this switch, when orange light is on, the machine is powered. 2. Boiler resistance light: This light comes on when the boiler water is being heated. 3. Coffee delivery switch with orange on/off indicator light: On pressing this switch, when orange light is on, coffee is delivered. 4. Hot water delivery switch with orange on/off indicator light: On pressing this switch, when orange light is on, the machine is ready to deliver hot water through the steam wand. 5. Steam delivery switch with orange on/off indicator light: On pressing this switch, when the orange light is on, the machine is ready to deliver steam. 6. Hot water/steam delivery knob: With switch (4) engaged, on turning the knob hot water comes out of the steam wand. With switch (5) engaged, on turning the knob, steam comes out of the steam wand. Note: Switches 4 and 5 must be used separately (water cannot be taken at the same time as steam or vice versa).

8. FUNCTION

8.1. Machine heating
To be undertaken on starting up (machine cold) Ensure you have water in the tank. Press main power switch (1); indicator light (2) comes on Never deliver steam longer than 4-5 minutes without filling the boiler water Wait until the machine reaches working temperature (when indicator light (2) goes off)

8.2. Coffee preparation

Detach the portafilter (13) from its slot by turning it in a clockwise direction and pulling in a downward motion. Using the measurement scoop (17) supplied, fill the filter with either one or two measurements of coffee according to the inserted filter (14/15). Press the coffee using tamper (16). Re-connect and tighten the portafilter (13) in its slot by turning it in a counter-clockwise direction. Position your espresso cup(s) under the exit outlets of the portafilter (13). Press the coffee delivery switch (3); delivery will begin after a few seconds. On obtaining the required amount turn off switch (3). Check frequently the water level in tank (8) in order to avoid causing the pump to pull in air during coffee delivery (which is noisy). If this should happen, immediately switch off the coffee delivery switch (3), fill the water tank and repeat the starting up operations. It is recommended to pay attention to the hot parts of the machine, especially the delivery group and the steam outlet steam wand. Never put your hands under the group or under the steam outlet while the machine is working. Silvia is designed for installation of our coffee pod kit. For further information, please contact your dealer accordingly.

8.4. To steam milk

Fill a steam pitcher approximately half-full with milk Immerse about half of the steam wand (7) in the liquid, open steam tap (6) and heat the milk to the desired temperature. Close steam tap (6), remove steam wand (7) from container. Restore the water level in the boiler (see relative paragraph 8.6).

8.5. Hot water delivery

Position a container under the steam wand (7). Open the steam tap (6) and discharge any steam present in the boiler. Press water delivery switch (4) and take the necessary amount of water. Close steam tap (6) and turn off water delivery switch (4).
8.6. Refilling water in the boiler
Check that switches (4) and (5) are off and that the portafilter (13) is disconnected; Press coffee delivery switch (3) and wait for the water to come out of group head (12) Turn off coffee delivery switch (3). In the event of a dangerous situation immediately turn off all the switches including main power and unplug the machine from the power source.

ADAPTABLE

8.7. Pump pressure adjustment (Fig.5)
Warning! This operation must strictly be conducted only by qualified technical personnel.

8.3. Steam delivery

Press the steam switch (5), wait a few seconds and then open the steam tap (6) to allow any condensed water to be expelled from the steam wand (7). Close the tap (6) again. Wait about 30 seconds, then immerse the steam wand (7) in the liquid to be heated. Open the steam tap (6), the steam will come out and heat the liquid to the desired temperature. Never deliver steam longer than 4-5 minutes without filling the boiler water Once the heating of the liquid is complete, discharge a little steam to clean out the sprayer hole in steam wand (7). Turn off the steam switch (5 )and clean the steam wand (7) with a damp cloth. Fill up the water in the tank (see relative paragraph 8.6)
To adjust the water pump pressure, unplug the machine so that it powers down completely. Wait until it has completely cooled down, then remove the top cover element by screwing out the relative lock screws. Once machine is open, proceed as follows: 1 Loosen the lock nut. 2 Act on the flexible hose connector fitting as illustrated i.e. screw it in to increase pressure or screw it out to decrease pressure. Take care to screw the connector fitting either in or out by maximum one turn. 3 Once the adjustment operation is complete, screw the lock nut back on again to close the connecting nozzle into position. Place the top cover element back on and lock the relative screws back in again.

9. MAINTENANCE

All maintenance operations must be carried out with the machine off and cold and with the power plug disconnected. Use a damp cloth or sponge for cleaning. Do not use any metallic or abrasive materials for cleaning (such as scourers, metal brushes, needles or detergents).

10.2. Definitive

Do the following in addition to the Temporarily placing out of service actions: Cut the power cable, Wrap cardboard or other material around the machine and consign to the authorized personnel (authorized refuse disposal center or used material collection center).

9.1. Daily (Fig.5)

Clean the bodywork, the steam wand* (7), the diffuser (19) and the cup-base seal (20) of group head (12). Check and clean the discharge drawer (11) as required. Rinse filters (14/15) and the portafilter (13) using hot water and a cloth or sponge. It is very important to clean the steam wand (7) with a damp cloth or sponge after each use, as well as discharging any milk residue from the wand by opening the steam tap (6) briefly, then closing again.

11. POSSIBLE PROBLEMS

In the event of damage to the power supply cable, contact an authorized service company for replacement as a special tool is required. The scrap materials used for processing or maintenance should be placed in containers and sent to special collection centers, unless they are biodegradable or non-polluting. Operations to be carried out by the user after having disconnected the electrical supply: A) The machine fails to start: - Check whether the power plug is connected - Check that the power is on and that the GFI (groundfault interrupt) or the main switch is engaged - Check the conditions of the plug and the power cable, should they be damaged have them replaced by authorized personnel B) Machine fails to deliver coffee - The water tank is empty; fill it - The boiler has not refilled after using the steam element C) Machine fails to deliver hot water and/or steam: - The water tank is empty; fill it - The boiler has not been refilled after using the steam element - Clogged nozzle: clean the steam delivery nozzle D) Irregular coffee delivery: - Rinse the portafilter - Rinse the dispersion screen by running water through the group head (12) to do so, press the coffee deliveryswitch (3) - Check that your grind is neither too coarse nor too fine. In the event of all problems not specified always detach the power cable, avoid undertaking any further diagnostic operations or direct repair, and contact the retailer or a qualified service company.
9.2. Periodically or after a period of intensive machine use
Do the following in addition to the Daily operations: Immerse filters (14/15) and the portafilter (13) in boiling water for a few minutes to allow the coffee grease to dissolve, then remove using a sponge or a cloth. Periodically use a special espresso machine-cleaning product. Carefully follow the instructions on the cleaning products packaging. For information concerning the choice of the cleaning product, contact the retailer. Clean water tank (8), carefully immerse water-delivery tube (18) (Fig.6) as far as possible into the water tank.

FS: Rancilio Audrey and El Cafe' Tranquilio Grinder
Source: http://newsgroups.derkeiler.com/Archive/Alt/alt.coffee/200908/msg00734.html
From: frijoli <cf@xxxxxxx> Date: Sun, 30 Aug 2009 18:31:59 0400
The Audrey works fine, and as most of you know the guts are the same as the Silvia. This is Silvia's UGLY sister. It does not have the water softener, but I descaled it at least once a month. It's missing the black plastic lid that covers the water tank. I also have a El Cafe Grinder which I really hate to part with but the bride says it must go. It's in fine condition We purchased a Jura F9 and she likes it because it's easy and makes better coffee than brewing. Anyway we're keeping the Jura. Asking 200 for everything, plus actual shipping costs(including packing materials). I don't want to split these up, but make an offer if you're interested in either.