Distributed by
Any reference to Raytheon or RTN in this manual should be interpreted as Raymarine. The names Raytheon and RTN are owned by the Raytheon Company.

Electronics

GENERAL OPERATION

Alarms

NAV298 GPS/LORAN

Quick Reference Card

ARRIVAL ANCHOR OFF COURSE
SetDistance# ON=0.01-9.99 NauticalMile OFF=0.00
Saves and Returns to Position Screen

CLEAR ENTER

Pressing clear silences the alarm when it is ringing, but does not shut down the alarm.
Turning On/Off Backlighting

Hold for 4 Seconds

Hold for 6 Seconds to Escape

Man Overboard

Silence Alarm

M.O.B.

Marks Location and Plots Return Course

EVENTS

Saving Events into Waypoint Memory

Press for 5 Seconds

Pressfor5seconds OR Tocustomizeyour tosaveyourcurrent ownevent#, positioninnext press0,0,9,enter availableWpt. forWaypoint#9 Location#.
*NOWAYPOINTCANBEOVERWRITTENIFITISPARTOFAROUTE.
Navigating to Stored Waypoints
Thenenter 3digit Waypoint #
Displays Navigational Information for Selected Event

ENTERING WAYPOINTS

Saving Wpt's in Memory (Lat./Long.)

N XXXX.XX E TLT N. A.

N XXXXX.XX E TLN. N. O G
Saving Wpt's in Memory (T.D.)

LRN OA TD1 XXXXX.X

LRN OA TD2 XXXXX.X
USE 0 FIRST IF LONGITUDE IS LESS THAN 100 DEGREES

ROUTE PLAN

NOTE Pressclearifamistake ismadeanditwillput youtothepreviousscreen.

Making A Route

AUTOMATICALLY PROMPTS YOU TO MAKE A ROUTE

EnterFirst Leg#(ex.006)

F __ R _

F 06 R 0 t __ o _

EnterNext Leg

F 06 R 0 t 06 o 3

F 06 R 3 t __ o _

F 06 R 3 t 02 o 0

F 02 R 0 t __ o _
EnterLegsUntil Finished&Then PressEnter

Shows For 3 Seconds

R UE OT DN OE

R DS T IT 32 6

RETURNS TO POSITION SCREEN

Use Existing Route

UE_ S -N ET

Forward

REF R T O -N ET

Automatic

AT UO -N ET
GOES TO ROUTE NAVIGATION SCREEN

RERV T E -N ET

Reverse EnterNext Leg

MN A -N ET

Manual

F __ R _ T __ O _

1stLeg
EDITS "TO" WPTS.

RE_ T CL AC

MORE LEGS

6 0-3 RN R G RG N

LegB/R

RETURNS TO POS. SCREEN

E AE? RS C GE T H-N

SR ? UE C GE T H-N

KEYPAD FUNCTIONS

GO TO 3

D-GPS W

4 2. 2' 81.6'

ROUTE 5

EVENT 6

SET UP 7

M.O.B. 8

PWR EXIT STS CHG

KEY SYMBOL

FUNCTION
Selects digit 1; selects P osition displays.
Selects digit 2; selects Navigation displays.

GO TO 3 WPT

Selects digit 3; selects a W aypoint as a destination.
Selects digit 4; selects W aypoint entry function.
ROUTE 5 EVENT 6 SET UP 7 M.O.B. 8 ALM
Selects digit 5; selects Route functions.

Selects digit 6; Memorizes ship's present position into next empty W aypoint memory.
Selects digit 7; selects various MENU functions.
Selects digit 8; selects Man-Overboard special Alarm function.
Selects digit 9; fast escape k ey abandons entry modes and returns to P , osition display.
T urns power On/Off; turns backlighting On/Off.
Escape k ey abandons operation and returns to P , os display mode.
Accesses Loran or GPS signal status.
Rotates menus within a function, selects +/-, N/S, E/W in P , osition mode.
Removes data from entry; resets numeric values to 0; silences audio beeper.
Selects digit 0; Loran C or GPS operations.
Accepts data for entry; advances to the next menu.