Chapter 2:

81236_1.book Page x Monday, January 5, 2004 3:41 PM
RC435 and RC435i Chartplotters Initial Switch On... 20 Checking Chartplotter Operation.. 21

Chapter 3:

Getting Started....23 3.1 Introduction... 23 Simulator... 23 3.2 Switching On/Off.. 24 Changing the Lighting and Contrast.. 24 3.3 Simulator Mode... 25 3.4 Controlling the Display... 26 Selecting the Display Mode... 26 Moving Around the Chart... 28 Using FIND SHIP... 28 Changing the Chart Scale.. 29 3.5 Using Navionics Gold Chart Cards.. 31 Inserting a Gold Chart Card... 32 Removing a Gold Chart card.. 32 Loading the Chart Data... 33 Displaying the Chart Data... 34 Setting Up....35 4.1 Introduction... 35 4.2 System Set Up Parameters... 35 Bearing Mode.... 37 Key Beep... 37 Units.... 38 Variation... 38 Variation Mode... 38 Date Format... 38 Time Offset... 38 Language... 38 Simulator... 38 Simulated SOG... 39 Simulated COG... 39 4.3 Chart Set Up Parameters... 40 Orientation.... 42 Plotter Mode... 42 Show Waypoints... 43 Waypoint Symbol... 43 Autozoom... 43 Screen Amplifier... 43 COG Vector... 43 Arrival Circle... 43 Anchor Alarm.... 44

Chapter 4:

81236_1.book Page xi Monday, January 5, 2004 3:41 PM
xi XTE Alarm... 44 Select Chart... 44 Chart Text... 44 Chart Boundaries.. 45 Safety Contours... 45 Depth Contours... 45 Spot Soundings... 45 Light Sectors... 45 Presentation... 45 Position Calibration... 45 GPS Setup... 46

4.4 Chapter 5:

Operation....49 5.1 Introduction... 49 Safety... 49 5.2 Working with Waypoints.. 50 Placing a Waypoint... 51 Selecting a Waypoint... 53 Waypoint Data Display... 54 Editing Waypoint Details.. 55 Erasing Waypoints... 57 Moving Waypoints... 57 5.3 Working with Routes... 58 Creating a New Route... 59 Saving the Current Route.. 61 Clearing the Current Route from the Screen. 62 Retrieving a Route from the Database.. 62 Displaying Route Leg and Waypoint Information.. 63 Erasing or (re)Naming a Route... 64 Route Info... 64 Editing a Route... 66 Inserting/Deleting Waypoints in a Route.. 66 5.4 Following Routes and Going to Target Points.. 68 Follow a Route... 69 Reverse a Route... 69 Target Point Arrival... 70 Alter a Route... 70 Join a Route... 70 Advance to a Waypoint.. 71 Restart Cross Track Error (XTE).. 71 Going to an Individual Target... 72 Go to a Waypoint.. 72 Go to Cursor... 73
81236_1.book Page xii Monday, January 5, 2004 3:41 PM
RC435 and RC435i Chartplotters Go to a Port.... 74 Stop Follow or Stop GoTo... 75 5.5 Changing the Display Mode.. 75 CDI Display... 76 BDI Display... 77 Waypoint Data... 78 Navigation Data... 80 Time/Date Data... 81 5.6 Transferring Waypoints and Routes.. 83 Displayed Waypoints... 83 5.7 Using Tracks... 85 Setting up a Track.. 85 Clearing the Current Track.. 87 SmartRoute... 87 5.8 Object Information... 88 5.9 Using Archives... 89 Archiving a Route... 89 Loading or Deleting an Archived Route.. 91 Archiving a Track... 92 Loading or Deleting an Archived Track.. 93 Archiving a Waypoint Set... 95 Loading or Deleting an Archived Waypoint Set.. 96 5.10 Displaying Chart Information... 99 Port Services... 99 Tide Information... 101 5.11 Man Overboard (MOB).. 107 5.12 Alarms.... 108

Chapter 6:

Maintenance & Troubleshooting...109 6.1 Maintenance.... 109 Routine Checks... 109 Servicing and Safety... 109 6.2 Resetting the System... 110 6.3 Problem Solving... 110 Fault Finding.... 111 6.4 How to Contact Raymarine.. 112 On the Internet... 112 Customer Support... 112 In the US... 112 In Europe... 114
Appendix A: Specifications...115 Appendix B: List of Abbreviations...117 Index....119
81236_1.book Page 1 Monday, January 5, 2004 3:41 PM

Chapter 1: Overview

1.1 RC435 and 435i Chartplotters
Display Features and Functions
The RC435/435i Chartplotter includes the following features: Detailed navigation information from installed Navionics Gold Chart card Positional information from Satellite Differential GPS GPS satellite status Create, Place, Move, Edit or Erase a Waypoint GoTo Waypoint, Port, Facility or Cursor Create, Save, Name, Edit or Follow a Route Review Route and Waypoint Lists Display Tide Heights, Tide Currents, Sun and Moon data Display vessels position, direction and track on-screen Convert a track to a route (SmartRoute) Alarms and Timers Man OverBoard (MOB) to navigate back to a missing person or object Display and keys illuminated for night-time use
Operating Controls and Display Layout
The chartplotter is operated by means of the following controls: A multi-direction trackpad with context sensitive cursor Six dedicated and labelled push-buttons
The main navigation display also features: Dedicated status panel Dynamic function bar On-screen pop-up menus Database lists for storing waypoints and routes
81236_1.book Page 2 Monday, January 5, 2004 3:41 PM

Status bar

PAGE key GOTO key CLEAR key ENTER key RANGE key

Trackpad

Chart card compartment
FIND SHIP ROUTES WAYPOINTS MORE

D6231-2

POWER key Cursor Vessel Symbol Primary Function Bar
Figure 1-1: RC435/435i Chartplotter Operating Controls

Trackpad and Cursor

On the primary chart display, the trackpad is used to move the cursor horizontally, vertically or diagonally. The cursor is the cross-hair symbol (+) which is used to select a position or item on the chart. The longer the trackpad is pressed, the faster the cursor moves. The current cursor position (in latitude and longitude) is shown in the status bar at the top of the screen. The cursor is context-sensitive. Some items on the screen, such as waypoints and chart objects have information associated with them. When the cursor is placed over such objects, this information is displayed in the status bar. Some items may also have options or settings. If available, these are displayed in a function bar at the bottom of the screen.

Database Lists

Waypoints and routes created on the chartplotter are stored in database lists. These lists can be viewed and items selected for editing. As with pop-up menus, when a database list is on-screen, a set of associated soft keys is also displayed; use the trackpad to select an item from the list, then use the appropriate function to edit the item. For example, a Waypoint or a Route can be erased.
1.2 Satellite Differential System
The RC435/435i GPS Antenna utilizes a satellite differential correction system to improve the accuracy and integrity of the basic GPS signals. Three separate compatible systems currently exist or are in development: 1. Wide Area Augmentation System (WAAS). Developed by the Federal Aviation Administration (FAA) in the USA. 2. European Geostationary Navigation Overlay System (EGNOS). This system is being developed by a European consortium.
81236_1.book Page 5 Monday, January 5, 2004 3:41 PM
3. The MTSAT Satellite-Based Augmentation System (MSAS). Being developed by the Japan Civil Aviation Bureau (JCAB) for civil aviation use. The area covered by the WAAS system includes the entire United States of America but also extends to a much wider area as detailed below.
135E 75N 150E 165E 180 165W 150W 135W 120W 105W 90W 75W 60W 45W 30W 15W 0 15E

D4910-1

Figure 1-2: WAAS Coverage Map The combination of the WAAS, EGNOS and MSAS systems will provide global satellite based differential GPS augmentation into the future.

How it Works

The following description is based on WAAS, but the principles apply equally to the EGNOS and MSAS systems. WAAS comprises the following components: Ground Reference Stations across the USA. Master Stations located at East Coast and West Coast. Geostationary Satellites located above the equator.
The Ground Reference Stations are located at known positions and receive data continuously from GPS. The Ground Reference Stations send their data to the Master Stations which calculate the error of the GPS-received positions and generate correctional data.
81236_1.book Page 6 Monday, January 5, 2004 3:41 PM
RC435 and RC435i Chartplotters The corrected differential signals are then sent to the two Geostationary Satellites which broadcast the corrected data on the standard GPS frequency, making it available to the GPS Antenna. The RC435/435i GPS uses the correctional data transmitted by the Geostationary Satellites to refine the basic GPS positional data for greater accuracy.

Surface Mounting

Top view

Underside view

D4725_1
81236_1.book Page 11 Monday, January 5, 2004 3:41 PM
1. Select a suitable area which allows access to the underside of the mounting surface for fixing and, using the template supplied in this document, carefully drill the two 6mm (0.25in) fixing holes marked. 2. If the cable is to pass through the mounting surface drill the 6mm (0.25in) or 19mm (0.75in) center hole depending on whether the plug is to pass through the surface or not. If the cable is to exit from the side of the GPS Antenna above the mounting surface, remove the two plastic tabs (1) obstructing the cable channel. Note: Failure to remove the plastic tabs from within the cable channel could result in cable damage. 3. Screw the supplied brass studs (2) into the underside of the GPS Antenna. 4. Stick the supplied gasket (3) to the mounting surface ensuring that the holes match and pass the cable through the center hole or the cable exit channel. 5. Carefully position the GPS Antenna, passing the studs through the holes in the mounting surface and secure to the mounting surface using the thumb nuts provided (4).
81236_1.book Page 12 Monday, January 5, 2004 3:41 PM

Pole Mounting

D4726-2
1. Screw the pole mount base to a suitable pole or rail mount bracket, having an industry standard 1inch 14TPI thread, until secure. 2. Pass the cable through the center hole of the pole mount base (A) or insert the cable into the side exit channel (B). 3. Check that the cable is positioned correctly and secure the GPS Antenna to the pole mount base using the two screws provided. If the cable is to exit from the side of the GPS Antenna through the side channel, remove the two plastic tabs obstructing the cable channel. Note: Failure to remove the plastic tabs from within the cable channel could result in cable damage.
81236_1.book Page 13 Monday, January 5, 2004 3:41 PM
2.4 Installing the Chartplotter
When planning the installation of your RC435/435i, the following points should be considered to ensure reliable and trouble free operation: Convenience: The unit should be installed in a convenient position where it can be viewed straight on or with a viewing angle of less than 35. You may wish to apply power before you install the unit, to determine the best viewing angle prior to fixing. The mounting location should be easily accessible to allow operation of the front panel controls. Access: There must be sufficient space behind the unit to allow cable connections to the rear panel connectors, avoiding tight bends in the cable. At least 50mm (2in) should be allowed at the right of the chartplotter to enable chart cards to be inserted and removed. Interference: The selected location should be far enough away from devices that may cause interference, such as motors and generators. Power Source: The unit should be located near a DC power source. The power cable supplied is 1.5m (5ft), but a longer cable can be used if required. Power must be supplied via a 1A quick blow fuse or circuit breaker. Refer to Running the Cable on page 17. Interconnections: The unit transmits navigation and waypoint data on NMEA and, therefore, can be connected to an NMEA compatible autopilot or compatible instrument repeater(s). The navigation data transmitted by the chartplotter is detailed in Appendix A. Environment: The unit should be protected from physical damage, heat sources and excessive vibration. Although the unit is waterproof, it is good practice to mount it in a protected area away from prolonged and direct exposure to rain and/or salt spray. When surface mounting the unit to an enclosed compartment, make sure that the compartment is ventilated and drained. Failure to meet this requirement may lead to excessive build up of moisture within the unit, leading to condensation on the screen. The dimensions of the unit, including the bracket, are shown in Figure 22.

81236_1.book Page 32 Monday, January 5, 2004 3:41 PM
Inserting a Gold Chart Card
CAUTION: To prevent the ingress of water and consequent damage to the unit, ensure that the chart card door is firmly closed. This can be confirmed by an audible click.
To insert a Gold Chart card, refer to Figure 3-2 :
1. Check that you are using the correct Gold Chart card for the required area. 2. Open the chart card door on the right-hand side of the unit. 3. Insert the card as shown with the smooth edge of the card outermost. 4. Gently press the card home. If inserted correctly the card release button will move outwards as the card is inserted. If this is not the case, flip the card and retry. 5. To prevent the ingress of water, close the chart card door and press firmly until an audible click is heard.
Removing a Gold Chart card
CAUTION: DO NOT use a metallic instrument, e.g. a screwdriver or pliers, to aid removal, as doing so can cause irreparable damage.
To remove a Gold Chart card:
1. 2. 3. 4. Open the chart card door. Gently press the card release button. Grip the card and pull to remove it from its slot. To prevent the ingress of water, close the chart card door and press firmly until an audible click is heard.
81236_1.book Page 33 Monday, January 5, 2004 3:41 PM

Card release button

To insert chart card

To remove chart card

D6235-1
Figure 3-2: Insertion and Removal of Gold Chart cards

Loading the Chart Data

A Gold Chart Card can hold multiple chart area portfolios. When the flash card is inserted for the first time and the display powered on the following is displayed.
81236_1.book Page 34 Monday, January 5, 2004 3:41 PM

1G737T32-FLORIDA SE

LOAD CHART
"ENTER" TO LOAD "CLEAR" TO QUIT

D6249-1

Note: Only one chart portfolio can be loaded from the Gold Chart Card to the display memory at a time. Use the trackpad up/down to select the desired chart and press ENTER to load it into the chartplotters memory. If a different portfolio is desired this can be accessed by the SELECT CHART option (see Select Chart on page 40).

Autozoom

When autozoom is enabled, initializing any navigation function or selecting FIND SHIP activates Autozoom. When active, this selects the chart range and position such that the vessel and the target waypoint are both on screen but at the largest scale possible. Moving the cursor off the vessel, or changing scale, deactivates Autozoom. Autozoom will not zoom in beyond the largest cartographic scale (unless Plotter Mode is activated). When in MOB mode, Autozoom is selected automatically and will zoom in as far as possible, irrespective of the selection of Plotter Mode.

Screen Amplifier

Screen amplifier mode makes best use of the screen by positioning the vessel on the screen so as to increase forward visibility. The screen amplifier is only active when the cursor is homed on the vessel.

COG Vector

When ON, a vector line from the vessel is drawn in the direction of COG. This line extends to the edge of the screen. If COG is not valid, no line is drawn. The selected setting is retained when the unit switched off.

Arrival Circle

The selected value is used as the arrival circle radius. When approaching the target waypoint, this is the distance at which the arrival alarm sounds. The selected setting is retained when unit switched off. Arrival criteria are met when the arrival circle is entered or a line perpendicular to the desired track and passing through the waypoint is crossed.
81236_1.book Page 40 Monday, January 5, 2004 3:41 PM

Anchor Alarm

The selected value is used as the anchor alarm distance. If the vessel moves outside of the selected distance from its position (at the time that the alarm was enabled) the alarm sounds and an alarm message is displayed. To silence the alarm, press any key. This removes the warning and resets the distance. The alarm will not be triggered again unless the vessel moves the selected distance from its position (at the time that the alarm was turned off). The alarm is set to OFF on power up.

81236_1.book Page 44 Monday, January 5, 2004 3:41 PM
To enable or disable SD-GPS mode.
1. Using the trackpad left/right highlight SD-GPS in the function bar.
2. Press ENTER to toggle between SD-GPS ON and SD-GPS OFF. Select ON to allow the unit to use SD corrections if available. Select OFF to force the unit to calculate a normal GPS fix with no satellite GPS corrections. 3. Press CLEAR twice to return to the normal display.

To reset SD-GPS.

1. Using the trackpad left/right highlight RESET GPS in the function bar and press ENTER. 2. Press CLEAR twice to return to the normal display.
81236_1.book Page 47 Monday, January 5, 2004 3:41 PM

Chapter 5: Operation

5.1 Introduction
This chapter explains how to use the chart functions to navigate with the RC435/435i.

Safety

The RC435 and RC435i chartplotters make it very easy to mark a waypoint and travel towards it. However, always check first that the route is safe. If you are using the chartplotter in combination with an autopilot, the autopilot will normally prompt for confirmation before it steers the vessel towards a waypoint. If a route has been entered using a less detailed chart, zoom in for more detail to check for hazards, such as small shoals, that may not be shown on the less detailed charts. Note: Until you are familiar with interpreting the chart display, you should take every opportunity to compare the displayed objects with visual targets, such as buoys and coastal structures. You should practice harbor and coastal navigation during daylight and in clear weather conditions. The equipment should not be used as a substitute for good navigational practice.
81236_1.book Page 48 Monday, January 5, 2004 3:41 PM
5.2 Working with Waypoints
The RC435 and 435i Chart plotters enable you to place up to 500 waypoints. A waypoint is a position entered on a chart as a reference or destination point. All waypoints placed on the chartplotter are stored in a waypoint database list which includes symbol, position, bearing, range, date and time. All waypoints in the database are displayed on screen, unless the SHOW WAYPOINTS is set to OFF in the Chart Set Up menu, as described in page 39. A waypoint can be selected, either on-screen or from the list, for editing. Waypoints can be placed either using the cursor, or at the vessels position, or at a specific lat./long. Waypoints can also be placed before the chartplotter is installed on your vessel. When a new waypoint is placed, it is displayed using either the default symbol of a cross or an alternative symbol available from the Chart Set Up menu, as described in Chapter 4. The waypoint is added to the waypoint list and named with the next available number. The edit functions can be used to change the symbol and name. When the cursor is positioned over a waypoint, the waypoint bearing and range are displayed. Waypoints can also be transferred between the chartplotter, other NMEA connected instruments or a PC, using the Waypoint Transfer functions. This section explains how to perform the following tasks using the onscreen cursor and the waypoint list: Placing a Waypoint Selecting a Waypoint Displaying Waypoint data Editing a Waypoint (symbol, name & position) Erasing a Waypoint Moving a Waypoint

Note: A waypoint that is the target waypoint or waypoints that are also used in any saved route(s) cannot be erased. If an attempt is made to erase a waypoint that is used in a saved route, the warning WAYPOINT IS USED IN ROUTE(S) AND CANNOT BE ERASED is displayed.
To delete a waypoint using the cursor:
1. Place the cursor over the waypoint; see Selecting a Waypoint on page 51. 2. Select WAYPOINT OPTIONS and press ENTER to display the Waypoint function bar. 3. Select ERASE WAYPOINT. A warning box appears. Press ENTER to erase or CLEAR to retain. If erased, the waypoint list is updated and the screen is cleared.
To delete a waypoint using the waypoint list:
1. Select the waypoint from the waypoint list as previously described. The waypoint list function bar is displayed. 2. Use trackpad up/down to move through the list to highlight the required waypoint. 3. Select EDIT WAYPOINT and press ENTER to display the Edit Waypoint function bar. 4. Select ERASE WAYPOINT. Press ENTER to erase the waypoint. To return to chart mode, press CLEAR three times.

Moving Waypoints

Any waypoint, except the target waypoint, can be moved. The Waypoint function bar and cursor are used to move the selected waypoint, or the waypoint position can be edited. Note: Take care when editing waypoints as it is possible to move waypoints that are used in routes stored in the Route Database List.
To move a waypoint using the cursor:
1. Place the cursor over the waypoint; see Selecting a Waypoint on page 51. 2. Select WAYPOINT OPTIONS and press ENTER to display the Edit Waypoint function bar. 3. Select MOVE WAYPOINT. The selected (highlighted) function now has help text appended to it.
81236_1.book Page 56 Monday, January 5, 2004 3:41 PM
CURSOR SELECT POS, "ENTER" MOVES WPT, "CLEAR" TO QUIT
4. Move the cursor to the required waypoint position. 5. When the cursor is in the correct position, press ENTER to set the new position and return to normal cursor control. To return to chart mode, press CLEAR twice.
To move a waypoint using the Waypoint List:
1. Select the waypoint using the Waypoint List as described above. The waypoint functions are displayed. 2. To edit the waypoint position proceed as previously described in Editing Waypoint Details on page 53.

5.3 Working with Routes

A route is made up of a series of waypoints (maximum 50). A route is made by placing a series of waypoints on the chart. When a route is created it becomes the current route and is displayed onscreen. The current route is maintained after power-off. Only one route can be current and is displayed (if it is in the field-of-view) as solid lines connecting waypoints. If following the route, the current leg is shown as a dotted line. After a route has been created, the GOTO key can be used to follow the route. The GOTO key provides various other options as described in Section 5.4, Following Routes and Going to Target Points. Up to 20 routes can be saved in the route database. Any one of these can be selected from the database to be used as the current route. The current route can be edited by adding and/or moving waypoints. When a route has been saved, options are also provided to name or erase a route. This section explains how to perform the following tasks: Create a new route. Save the current route in the database. Clear the current route. Retrieve a route from the database list as the current route. Display route information, including route leg data and waypoint details.

STOP GOTO RESTART XTE

D4689 1

STOP FOLLOW

WAYPOINT ADVANCE
The dotted line from the vessel to the target waypoint disappears.
5.5 Changing the Display Mode
Use the PAGE key to select the required display mode. Repeat presses of the PAGE key provide the following display modes: Set Up functions (see Chapter 4) Course Deviation Indicator (CDI) Bearing & Distance Indication (BDI) Waypoint data Navigation data Time/Date data Return to Chart display
Note: Press the GOTO key in any display mode to return to normal Chart display.
To change the display mode:
1. Press the PAGE key to show the SET UP functions with SYSTEM SET UP highlighted:
SYSTEM SETUP CHART SETUP TRACK SETUP GPS SETUP

D4699_1

2. Repeat Step 1 to cycle through each of the available display modes.
81236_1.book Page 74 Monday, January 5, 2004 3:41 PM
RC435 and RC435i Chartplotters Note: The Set Up Function Bar remains displayed in each display mode. To remove the Set Up Function Bar, press CLEAR.

CDI Display

The CDI display shows Cross Track Error (XTE) and distance to waypoint presented in a runway format:

D6241-1

Figure 5-5: CDI Display The runway represents a 0.3nm width with the vessel symbol shown on the center line when the vessel is on course. Cross Track Error (XTE), Bearing to Waypoint, Distance to Waypoint, Time to Go (TTG), Course Over Ground (COG) and Speed Over Ground (SOG) are also shown. Time to Go is calculated on the basis of distance to destination and Speed Over Ground (SOG) towards the destination. At waypoint ranges greater than 4nm, the symbol remains at the top of the screen. As the waypoint range falls below 4nm, the symbol moves down the center line. The checkered pattern moves down the screen to simulate movement when SOG is greater than 2 knots.
81236_1.book Page 75 Monday, January 5, 2004 3:41 PM
The steering instruction is STEER STARBOARD if the XTE is 0.01nm or more to port, STEER PORT if the XTE is 0.01nm or more to starboard or ON COURSE if the XTE is less than 0.01 on either side. If no GoTo or Follow is in progress, the steering instruction is NOT TRACKING. The graphical XTE indication places arrows either side of the steering instruction and pointing towards it, dependent on the value of XTE. The first arrow is shown when the XTE reaches 0.01nm, the second at.05nm and subsequently at 0.1nm intervals.

1. Select CLEAR TRACK. The current track is cleared from the screen and memory. 2. If no further track points are to be placed, select TRACK OFF and press ENTER; the TRACK OFF text changes to indicate TRACK ON.

SmartRoute

SmartRoute enables the latest track to be converted to a route.
To convert a track to a route:
1. Select MAKE INTO ROUTE and press ENTER. The current track is converted to a new route, with the most recently placed track point as the start of the route. In other words, the track is reversed. If there is an unsaved current route on screen, the option to save the route is given, see Section 5.3, Working with Routes. 2. Check the calculated route and that the route deviation from the original, given in the warning box, is within navigable limits.
81236_1.book Page 86 Monday, January 5, 2004 3:41 PM

5.8 Object Information

The OBJECT INFO function provides detailed information about objects displayed on the chart.
To display detailed object information:
1. Using the trackpad, place the cursor over the desired object. 2. In chart mode, press ENTER; the primary function bar is displayed:
3. Using trackpad left/right, select OBJECT INFO. A list of cartography objects under the cursor is displayed. 4. Use the trackpad up/down to select the required object and press ENTER for detailed information. 5. Use the trackpad up/down and left/right to scroll through the detailed information. 6. Press CLEAR three times to return to normal operation. Note: For best results, use the OBJECT INFO function in a close range chart view.
81236_1.book Page 87 Monday, January 5, 2004 3:41 PM

5.9 Using Archives

The ARCHIVE function is used to save routes, tracks and waypoints to the Gold Chart card. This is particularly useful if you use a lot of routes, tracks or waypoints and do not wish to repeatedly re-enter these. Once you have archived your data to the card, the copy on the chartplotter can be deleted, thus freeing up memory. Note: A typical 32Mb Gold Chart card will hold up to 500 waypoints or 20 routes, each with up to 50 waypoints. If the Gold Chart card also contains chart files then these values will be lower.

Archiving a Route

To archive a route:
2. Using trackpad left/right, select ARCHIVES.
ARCHIVE ROUTE ARCHIVE TRACK ARCHIVE WAYPOINT MORE

D6254-1

3. Select ARCHIVE ROUTE. A list of routes currently loaded in the chartplotter is displayed. Use trackpad up/down to select the route you wish to archive and press ENTER. To leave without archiving, press CLEAR.
81236_1.book Page 88 Monday, January 5, 2004 3:41 PM

81236_1.book Page 101 Monday, January 5, 2004 3:41 PM
To display Sun/Moon data:
1. Select SUN/MOON DATA. The SUN rise/set and MOON rise/set times are displayed. The MOON PHASE box indicates the number of days referred to full moon, together with a pictorial representation.
SUN RISES SETS MOON RISES SETS 4:50 19:45 4:18 19:13
TODAY DATE:13/ 7/99 TIME:04:13:56 MOON PHASE FIRST QRT IN 7 DAYS

TIDAL HEIGHTS

PREVIOUS DAY

NEXT DAY

D4976_2
Figure 5-20: Tidal Heights & Sun/Moon Data Display 2. Select TIDAL HEIGHTS or press CLEAR to return to the Tidal Heights data.
81236_1.book Page 102 Monday, January 5, 2004 3:41 PM

Tidal Current

To obtain Tidal Current Data:
1. Place the cursor over a Tide Current symbol. The Tidal Current soft key and help text appear.
TIDAL CURRENT "ENTER"FOR TIDAL INFORMATION, "CLEAR" OR MOVE CURSOR QUITS

D4978_1

2. Press ENTER to show the Tidal Current information and soft keys or CLEAR to cancel the operation.

NANTUCKET HARBOR

1.75 1.46 1.18 0.89 0.60 0.32 0.22 24

TIDAL CURRENT

TIME CURSOR TIME SET DRIFT MAX EBB FLOOD EBB FLOOD 4:1.1Kts TIME 3:21 8:02 15:59 20:24 SET DATE: TIME: TODAY 13/ 7/99 01:15:10
DRIFT 1.7Kts 1.3kts 1.6Kts 1.2Kts
SLACK --:-12:02 5:56 18:31

D4979_3

Figure 5-21: Tidal Current Display
81236_1.book Page 103 Monday, January 5, 2004 3:41 PM
The Port Name is that supplied by the Gold Chart cartridge. The Tidal Current graph is automatically scaled. The cursor, represented by a dashed line, can be moved along the horizontal axis by means of the Trackpad. A CURSOR data box below the graph shows corresponding TIME, SET and DRIFT. DATE and TIME for TODAY (default) are shown with PREVIOUS/NEXT DAY information available via the MORE OPTIONS soft key; repeated presses of these two soft keys moves the date back/forward one day at a time. Times of MAXimum EBB and FLOOD Tides, together with SET and DRIFT figures are shown. A separate box shows corresponding SLACK figures. This data corresponds to the selected Date/Time. 3. To return to chart display, press CLEAR.
To display the Tidal Current data for a particular Date:
1. Press ENTER to select MORE OPTIONS; the SUN/MOON DATA soft keys are shown.
2. Using trackpad left/right, select PREVIOUS DAY or NEXT DAY soft key; press ENTER the appropriate number of times to select the required Date. 3. Select TODAY to return to current Date/Time.
1. Select SUN/MOON DATA; the SUN rise/set and MOON rise/set times are shown in individual boxes. The MOON PHASE box indicates the number of days referred to full moon, together with a pictorial representation. 2. Select TIDAL CURRENT or press CLEAR to return to the Tidal Current data.

81236_1.book Page 104 Monday, January 5, 2004 3:41 PM
TIME SUN RISES SETS MOON RISES SETS 4:50 19:45 4:18 19:13 TODAY DATE:13/ 7/99 TIME:01:16:56 MOON PHASE FIRST QRT IN 7 DAYS

D4980_2

Figure 5-22: Tidal Current & Sun/Moon Data Display
81236_1.book Page 105 Monday, January 5, 2004 3:41 PM

5.11 Man Overboard (MOB)

If a person or object is lost overboard, and you need to return to the location, use the Man Overboard (MOB) function. Note: To obtain MOB position, a valid GPS fix must be available.
To initiate the MOB procedure from the Chart display, press and hold
the GOTO key for two seconds. The system performs the following tasks automatically: Stops any GoTo or Follow operation. Selects a / nm scale (even if cartography is not available). Marks the current position as a temporary waypoint with an MOB symbol which replaces any current active waypoint and route. Displays the MOB data box, showing the bearing and range to the MOB position, the elapsed time since the MOB was initiated and COG data.
Sends an MOB message, including bearing and range, to other units in the system, via NMEA.
Notes: (1) A suffix (c) to the POSition data indicates that the vessels position has been User Calibrate., (See Chapter 4, Setting Up.) Notes: (2) The RANGE key operates normally to change chart scale.
To cancel MOB, press and hold he GOTO key for 2 seconds.
The MOB symbol and data box are removed and the unit returns to normal Chart mode.
81236_1.book Page 106 Monday, January 5, 2004 3:41 PM

5.12 Alarms

The chartplotter reports the following alarms
Alarm Arrival Indicates The vessel has arrived at the active waypoint: it has either reached the arrival circle (the radius of which is specified) or, has reached its closest point of approach (defined by a line passing through the waypoint and perpendicular to the track). The vessel has exceeded the specified distance (maximum cross track error) from the active route leg. The vessel has drifted from its anchor position (set when the alarm was turned on) by more than the specified distance. GPS fix or Differential data has been lost for more than 30 s.

XTE Anchor No Fix

new GPS

Chartplotters

RC400 RC435 RC435i

GPS Chartplo
Portable GPS Chartplotter
The RC400 packs big navigation features into a compact and portable GPS that harnesss the power of Navionics Gold cartography for paper chart like clarity, and fast screen updates. Both fixed mount and portable, the RC400 comes standard with a mounting bracket and cables for 12-volt power and NMEA 0183 interfacing. The battery compartment holds 4 AA rechargeable Nickel metal hydride (NiMH) batteries and also accepts alkaline batteries for added convenience.
3.5 Daylight viewable transflective color LCD Submersible to IPX7 Standard: Submersible to 1 meter for at least 30min. 12 Channel Satellite Differential GPS with WAAS Built in world map and Navionics Gold chart support on compact flash cards Unlimited waypoint, route and track storage using compact flash cards Raymarine SmartRoute automatically builds routes and waypoints from previous tracks Autozoom Mode intelligently maintains your vessel and your waypoint on the best chart scale while underway Screen Amplifier automatically offsets your vessel position for maximum look ahead on the chart display

Submersible

Chart rotation modes: North Up; Course Up and Head Up Accepts 4 AA NiMH rechargeable (included) or alkaline batteries for handheld operation Supplied with Cradle/Charger and NMEA/Power cable
About Navionics Gold Charts
Familiar appearance of a paper charts A clear uncluttered chart display on every range scale Shaded Depth Contours Real-world shapes and colors of buoys and navaids. Spot Soundings Tides and Currents Port Plans and Port Service Guides
To learn more about Navionics Gold charts and to browse the complete Navionics chart catalog go to www.navionics.com

otters

RC435 RC435i
Essential navigation data is clearly displayed in one of three information pages.
The RC435 and 435i are full-featured compact chartplotters designed for fast performance and uncomplicated navigation. Featuring high-resolution color displays, professional quality vector cartography, and point and shoot navigation RC435 is the clear and simple choice for advanced electronic charting. This compact charting powerhouse is available in two versions, the RC435 with external antenna or the easy-to-install RC435i with a built in antenna.
Bold 5.7 Daylight Viewable color display Paper like color chart display using Navionics Gold Chart cartography Compact Flash support for cartography and unlimited waypoint, route and track storage Raymarine SmartRoute automatically builds routes and waypoints from previous tracks
BDI (Bearing Distance Indicator) combines digital and graphic "steer to waypoint" information on a full screen display
Autozoom Mode intelligently maintains your vessel and your waypoint on the best chart scale while underway Screen Amplifier automatically offsets your vessel position for maximum look ahead on the chart display Standard 12 channel Satellite Differential GPS receiver for extreme accuracy using WAAS Rugged waterproof (CFR46 standard) display and Raymarine reliability backed by a two-year limited warranty
Full screen CDI (Course Deviation Indicator) graphics guide you to your waypoint.

RC400 Specifications

Display Size and Type Dimensions Weight Operating Temp Range Storage Temp Range Humidity Controls Interface Cartography 3.5 Advanced Transflective TFT Color LCD (H x W x D) 6.48 x 3.57 x 1.75 (164.6mm x 90.6mm x 44.5mm) 15.2 oz (431g), including batteries -10 deg C to 50 deg C -20 deg C to 70 deg C up to 95% RH 7 defined keys and trackpad NMEA 0183 - receive and transmit, waypoint upload and download Navionics Gold Charts on compact flash
Chartplotter Specifications Waypoints Waypoint Names Routes Route Names 8 character Alarms Arrival / XTE / Anchor / No Fix Tides/Current Predictions Sunrise/Sunset Predictions External Memory GPS Specifications
character 20 routes with up to 50 waypoints each

Via chart Via chart

Store Waypoints / Routes / Tracks on Compact Flash cards up to 128MB
Signal Acquisition Satellite Differential Type Differential Acquisition: Position Accuracy (RMS) Position Accuracy (SD GPS) Time to First Fix
12-channel parallel (C / A Code) WAAS / EGNOS / MSAS ready Automatic < 15 m <5m (from cold start ) Typically < 3 min, 4 minutes max
RC435/RC435i Specifications
Display type Nominal Voltage Power Consumption Interface Cartography Waypoints Waypoint Names Routes Route Names Alarms Tides/Current Predictions Sunrise/Sunset Predictions GPS Specifications Signal Acquisition Antenna Satellite Differential Type Differential Acquisition Position Accuracy (RMS) Position Accuracy (SD GPS) Time to First Fix (from cold start) Time to First Fix (after initial cold start) 12-channel parallel (C / A Code) RC435i: Internal passive RC435: External passive with 10m cable WAAS / EGNOS / MSAS ready Automatic < 15 m <5m Typical < 2.5 min (< 40 sec) Typically < 8 seconds 5.7" 1/4 VGA 16 Color TFT Display 10-18 Volts 10 Watts (backlights on full) NMEA 0183 output (GGA, GLL, RMC, VTG, GSA, GSV, ECXTE, ECBWR, ECRMB, ECAPB) Navionics Gold Chart character 20 routes with up to 50 waypoints each 8 character Arrival / XTE / Anchor / Fix Via chart Via chart Chartplotter Specifications

Raymarine Incorporated 22 Cotton Road, Unit D Nashua, NH 03063-4219 USA Tel: 603.881.5200 Fax: 603.864.4756
Raymarine Limited Robinson Way Anchorage Park Portsmouth Hampshire PO3 5TD England Tel: +44 (0)3611 Fax: +44 (0)4642
Raymarine develops and manufactures an extensive range of marine electronics. Please visit our website at www.raymarine.com to learn more about our complete line of radar, GPS, chartplotters, instruments, fishfinders, VHF radios, software and integrated systems.

www.raymarine.com

Specifications subject to change without notice