GAIN Not used in Chart mode. VRM/EBL Use to measure range and bearing to/between points. - Position cursor at start point, and press VRM/EBL key to display the Ruler data box. Select end point using trackpad, and press ENTER to fix end position of ruler. MULTI Controls display lighting and contrast (monochrome) or brightness (color). - Press to display sliders. Monochrome
DISPLAY Controls display mode and windows. - Press for display mode and soft keys display. - Press again to toggle through display modes, then ENTER. - Press and hold for 2 seconds for full screen display. Monochrome
WINDOWS OFF ON SELECT WINDOWS

Chartplotter

WINDOWS OFF ON SELECT WINDOWS OVERLAY OFF ON

CONTRAST

Soft Key Labels: Change when you press a key. Default soft key labels are shown.
ROUTE GOTO SCREEN FIND SHIP
Press soft keys to toggle window on/off and to select lower window. Press ENTER to finish.
Color - Press and hold MULTI key for brightness to 100%.
MARKS / MOB Controls waypoints, and Man Overboard function. - Press to display waypoint soft keys. - Press and hold for 2 seconds to activate or cancel MOB.
PLACE WPT PLACE WPT AT CURSOR AT VESSEL WAYPOINT LIST LOAD/SAVE USER CARD
Select a slider using the soft key or trackpad. Toggle between off/on by pressing the soft key again. Adjust slider using trackpad, and press ENTER to finish.

ALARMS

Soft keys Press to select option, or slider. Labels change when you press soft/dedicated key. Elipses (.) after the text indicate that pressing soft key leads to a further display of soft key options. ENTER Confirms selection and (if appropriate) clears current soft key labels. It performs the selected task, accepts changes, or displays more options. When cursor text is displayed, takes cursor control of the object. When arrow-head cursor symbol is displayed, drops the object under cursor control. CLEAR Cancels operation in progress and returns to the previous display. Deletes an object/function under cursor control. Trackpad Controls cursor position and the slider values. Hold the trackpad down to move the cursor faster. POWER Press and hold until unit beeps to turn on display. Press for 3 seconds to turn off display.
Press soft key to place waypoint at cursor or vessel, or display the waypoint list/user card menu and asscociated soft keys. Press ENTER to finish.
Use to set up the chartplotter alarms. - Press to display the Alarms set up menu and soft keys, the soft keys correspond to the selected alarm.

ALARMS SET UP

ARRIVAL ALARM OFF TRACK ALARM ANCHOR ALARM COUNTDOWN TIMER ALARM CLOCK 0.01nm OFF OFF 00:33:00 OFF
RANGE Controls chart scale. Displayed vertical distances shown in the Status Bar. - Press top of key to increase the chart distance. - Press bottom of key to decrease the chart distance. - Press and hold to change the scale faster.
Provides access to setup options. - Press to display soft keys.
SYSTEM SET UP CHART SET UP TRACK SET UP GPS SET UP

SELECT ARRIVAL ALARM RADIUS
Use the trackball to select the alarm, then use the soft keys to adjust parameters and/or toggle the alarm on/off. Press ENTER to finish.
Press soft key to display required setup menu, then use trackpad to select option and soft key to change option. Press ENTER to close menu, and CLEAR to finish.

D5983-1

Quick Reference Card: SL70RC PLUS Series Chart Displays

86079_1

Default Display

Chart Range Status Bar

Context Sensitive Cursor Control
When the cursor is positioned over special features on the display, a text label appears to identify the feature. Depending on the feature, you can then move, re-size or delete it. Move (for example, a waypoint) 1. Text Label A-B BOX COG HDG MOB MRK POS RTE TIDE WPT Feature Ruler line Data box (any type) Course Over Ground Vector Heading Vector Man OverBoard Marker Mark Vessel's Position Route Leg Tide Vector Waypoint
Chart Boundary Vessel Position Waypoint

2. WPT 3.

Cursor selecting chart object Depth Area
Delete (for example, a waypoint) 1.
Object data box for object selected by cursor
Cursor position box Shows the current cursor position as either Range/Bearing or Lat/Long. You can move this box to your preferred position on the screen or turn it off. Default soft key labels These can be turned off: press any soft key to redisplay them. Different labels are displayed when you press a key.

4. 2. WPT

GOTO ROUTE

MAKE ROUTE

Soft Keys
PLACE WAYPOINT UNDO WAYPOINT ACCEPT ROUTE USE WPT LIST

REVERSE ROUTE

GOTO WAYPOINT
Press to reverse the waypoint order in the current route. Use the soft keys to set up a series of waypoints as a route. Use the trackpad to move the cursor then press PLACE WAYPOINT, and/or select a waypoint from the Waypoint List. Continue until the route is complete. Press ACCEPT ROUTE to finish.
Use to navigate to a waypoint selected from the waypoint database list. Use the trackpad to select the waypoint then press the soft key to start the GOTO.

EDIT ROUTE

PLACE WAYPOINT

UNDO WAYPOINT

ACCEPT ROUTE

USE WPT LIST

SAVE ROUTE

GOTO CURSOR

NAME ROUTE YES NO

STOP GOTO

CLEAR ROUTE
Use the softkeys to edit the current route. Press UNDO WAYPOINT to remove the last waypoint in a route. Press PLACE waypoint and/or select a waypoint from the Waypoint List, to add a waypoint at the end of the route. Press ACCEPT ROUTE to finish.

Use to save and name the current route.
Press to navigate to the cursor position. When you press GOTO CURSOR, a temporary waypoint is added at the cursor position and the GOTO is started. Press STOP GOTO to cancel.

ROUTE LIST

SHOW ROUTE

ERASE ROUTE

ROUTE INFO

NAME ROUTE

FOLLOW ROUTE

STOP FOLLOW

RESTART XTE

WAYPOINT ADVANCE

Press to clear the current route from the display, if it is not saved you are prompted to save the route.
Use the soft keys to manage the route database list. Use the trackpad to select a route then press the required softkey.
Press to follow the current route. Use the softkeys to cancel the follow, or to modify the route whilst it is being followed

D5709_1