F52 F32 M22

PERFORM

C52 C32 LISTEN
Owning Revel loudspeakers is a pleasurable experience for both the ears and eyes. Learning about
the finer details of their design and construction will deepen your appreciation of their lasting value.
The Revel Performa Series represents the culmination of Revels tremendous acoustical research and technological resources. Revels world-class team of engineers, designers, and acoustical researchers was challenged to create premium loudspeakers that combine superior audio performance with handsome aesthetics. The resulting Performa Series loudspeakers feature proprietary drivers housed in beautiful cabinetry that attains stunning sonic performance and placement flexibility while complementing the dcor in most homes.
THE LISTENING LAB The Performa Series offers truly superior sound quality and incomparable technical pedigree, thanks in part to Revels sophisticated laboratory listening technique that for the first time provides an accurate correlation between loudspeaker measurements and sonic performance. Though laboratory measurements are critical, human hearing is the ultimate evaluation tool. Revels Multichannel Listening Lab (MLL) represents the industrys most sophisticated loudspeaker listening facility, allowing loudspeakers to be compared as single speakers, stereo pairs, or multiple speaker groups. Revels tests are based on extensive real world listening in more than five different environments that simulate a wide range of residential settings and room sizes. The MLL facility features a remarkable, exclusive computer-controlled speaker switching stage that eliminates the problems associated with speaker placement and aural memory variables. Loudspeakers are placed on computer-controlled, movable platforms that can quickly be arranged during testing. As a
result, the speaker repositioning process takes only a few seconds, allowing listeners to quickly and accurately compare speakers to each other from the same room position and with minimal time in-between models. All tests are conducted double-blind. Once the loudspeakers are installed on the MLL platforms, an acoustically transparent but visually opaque veil obscures loudspeaker identities from the listening panelists to prevent human bias from tainting the results. Even the computer operator is not aware of the loudspeaker identities, as the computer randomly determines the listening order prior to the test.
ANECHOIC CHAMBERS While few loudspeaker companies have access to one, Revel has three different anechoic (echo-free) chambers. Unlike most other companies, Revel does not depend on electronic anechoic simulator testing methods that often fail to reveal critical performance flaws such as resonances. Revels anechoic chambers are state-of-the-art in design, allowing for accurate and useful loudspeaker measurements of complete loudspeaker models and individual driver elements.
TRANSDUCERS, TESTING & QUALITY CONTROL Most loudspeaker manufacturers out-source their transducers, purchasing off-the-shelf tweeters, midranges, and woofers from vendors. Revel loudspeakers feature proprietary transducer designs found in no other companys products. These transducers are exclusively designed,
engineered, and manufactured for Revel loudspeakers. Revel engineers use Computer Aided Design (CAD) software to design transducers that are optimized for each Revel model. A powerful Finite Element Analysis (FEA) system provides a comprehensive computer simulation of the entire driver assembly, allowing engineers to optimize every aspect of a transducer assembly. FEA produces precise models of the drivers magnetic system, which is used to optimize the electro-magnetic circuits for each transducer according to the individual drivers application. Transducer components such as cones, domes, surrounds, and centering mechanisms (the spider) also benefit from FEA scrutiny in the design process. An in-house Stereo Lithography Apparatus (SLA) is used during development to help assure very tight tolerances and minimize development times. The SLA utilizes a high-power laser to precisely solidify a liquid polymer into the 3-dimensional shapes specified in CAD drawings. This allows designs to be turned in real prototypes very quickly so they can be verified before going into production. During development, Revel also uses the industrys most sophisticated driver distortion analyzer to pinpoint the precise source and location of undesirable distortions within the driver assembly. In addition, a high-resolution Laser Interferometer scans the entire radiating surface of the driver for evidence of breakup, which occurs when the radiating surface flexes undesirably. This incredible tool helps Revel drivers to achieve more linear piston-like behavior, delivering minimal coloration and excep-

tionally low distortion. The Laser Interferometer also contributes to the design of the loudspeaker cabinet. To avoid undesirable coloration, the cabinet enclosure must not cause unwanted resonances. Laser scanning the loudspeaker enclosure allows for optimization of the cabinet design, including proper placement of internal bracing to create an acoustically inert enclosure conducive to the most neutral and honest sound reproduction. Prior to installation in the loudspeaker enclosure, each loudspeaker driver complement and associated crossover elements are subjected to rigorous testing as a complete sub-assembly. Components are tested in an anechoic chamber and then compared to production reference standards. But even with the tightest production tolerances, slight deviations still might occur from one loudspeaker to the next. To prevent this, a technician compares each loudspeaker to the reference standard, making careful adjustments by hand as needed. All tuning adjustments and specifications are then recorded and retained for archive purposes, referenced to the loudspeakers serial number. This careful attention to detail allows Revel to achieve unparalleled consistency among all loudspeakers, alleviating the need for matched pairs. Instead, all Revel loudspeakers are matched within a fraction of a decibel to achieve superior soundstage imaging and accuracy. Each pair of Performa loudspeakers sounds the same as the original reference pair as well as the loudspeakers that have won accolades from reviewers around the world. Physically separated circuit boards for each
frequency range prevent degrading mutual interference caused by component-to-component interaction. The result is distinctly more transparent and distortion-free sound reproduction. With the premiere of the Ultima Series, Revel earned a reputation for producing the worlds finest loudspeakers. Since then, Revel loudspeakers have won accolades from discerning audiophiles and critical reviewers alike. Collectively, the Performa Series offers an impressive combination of advanced design, precision manufacturing, stunning audio performance, and handsome aesthetics. Individually, each Performa loudspeaker is a standout performer that delivers a performance as powerful as it is precise. The following pages detail the unique design, engineering, and capabilities of each Performa loudspeaker model.

F52 Shown in Natural Cherry finish
At left, the F52 driver complement:
ly inert MDF and features substantial internal bracing for added rigidity. The F52 tweeter assembly features a proprietary 1-inch aluminum dome tweeter housed in an integrated Constant Acoustic Impedance waveguide, which provides both optimum acoustic loading as well as optimized horizontal and vertical dispersion. The result is a virtually seamless transition from the midrange to the treble frequencies that also provides virtual acoustic invisibility, where the tweeter itself cannot be localized as A five-driver, three-way design, the Performa F52 includes a trio of high performance 6 2-inch
612-inch woofers 514-inch midrange 1-inch tweeter

F52 crossovers woofer

midrange
an individual driver. As with other Performa models, each F52 is individually calibrated during production, hand-tuned to within a fraction of ence standard, assuring unparalleled unit-to-unit consistency. Three physically separated high order, steep slope crossovers each feature tight tolerance components, and two pairs of inputs on the rear panel allow for bi-wiring or bi-amping, while a precision tweeter adjustment allows fine tuning of

tweeter

woofers that incorporate our exclusive Organic Ceramic provides the ultimate combination of rigidity and lightness. Featuring butyl surrounds and high strength magnetic motor structures, together these woofers provide the deep bass response commonly associated with a much larger single driver, along with low distortion and wide frequency response, allowing a
F52 shown in Black Ash finish
Composite cone technology, which a decibel to the production refer-
much narrower cabinet profile. The the high frequency balance in 514-inch OCC cone midrange driver exact.5 dB increments. is similarly equipped, and is housed in its own sub-enclosure within the F52s elegant cabinet, which is The Performa F52 is available in your choice of elegant wood veneer finishes Natural
The F52 rear panel tweeter level control and binding posts (shown with shorting straps)
constructed of thick and acoustical- Cherry, Maple or Black Ash.
F32 Shown in Natural Cherry Finish
Sophisticated Dual Neodymium magnetic motor systems optimize linearity over a wide operating range, resulting in consistent timbre and low distortion over a wide dynamic range. These remarkable drivers also feature 2inch high power-handling flat-wire edge-wound voice coils for unprecedented power handling capability and low distortion. Virtually identical to the woofer except for size, the 514-inch midrange driver is optimized for the crucial midrange frequencies, providing remarkably smooth timbral response and wide dynamic range with vanishingly low distorThe F32 combines large floor-standing loudspeaker perdesign with a small footprint for maximum placement versatility and high visual appeal. It features four magnetically-shielded proprietary drivers that offer a host of improvements in vital areas such as dynamics, distortion, and dynamic compression along with improved low-frequency reproduction and wider placement versatility. The F32 features two highperformance 6 2-inch woofers that

At left, the F32 driver complement: 612-inch woofers 514-inch midrange 1-inch tweeter

F32 crossovers woofer

tion. The treble frequencies are faithfully reproduced by a newlytweeter
formance in an elegant slim cabinet developed 1-inch pure titanium dome tweeter that features true pistonic behavior over its entire operating range and incorporates Ferrofluid cooling. Nearly half the width of its predecessor, the F32 cabinetry features tapered sides that provide a svelte appearance and improved placement flexibility, aided by a Contour setting for various inroom acoustical conditions as well as a Boundary setting that allows for near-wall and in-wall installations. Each F32 is carefully calireference standard to within a fraction of a decibel and is superbly finished in a choice of Natural Cherry, Maple or Black Ash wood veneer.
F32 shown in Maple finish
provide the surface area of a much larger single driver and produce authoritative bass with tremendous Ceramic Compound cone material assures piston-like diaphragm operation, contributing to the very low distortion and freedom from coloration.
output capability. Exclusive Organic brated to match the production
Rear panel with tweeter level control, low-frequency compensation control and binding posts
M22 Shown in Maple Finish on optional pedestals
At left, the M22 driver complement:
well as an aluminum flux stability ring for unparalleled magnetic linearity and incredibly low distortion. Treble frequencies are ably reproduced by our exclusive pure, magnetically-shielded 1-inch titanium dome wide dispersion tweeter, featuring an advanced co-polymer surround and Ferrofluid cooling, Reviewed as Class-A sound quality from a small loudspeaker, the Performa M20 set the standard for state-of-the-art compact monitor performance. The new M22 continues to elevate the performance standard, featuring newly developed driver technology shared with the F32 floor-standing speaker system, along with a new slim cabinet design that allows tremendous placement versatility and high visual appeal. Featuring a high power handling, magnetically-shielded 6 -inch

612-inch woofer 1-inch tweeter

M22 crossovers woofer

providing true pistonic behavior for reproduction beyond the limits of human hearing. Internally, the M22 features physically separated high-order crossover boards that incorporate precise fixed-resistor, high-frequency level trimming, as well as a boundary compensation system that allows for optimum timbral response with either stand mounting or shelf mounting. During production, each M22 is individually calibrated to match the production reference standard to within a fraction of a decibel, assuring outstanding consistency and timbral accuracy. The elegant cabinetry feaally suggest an even smaller appearance and is finished in a choice of Natural Cherry, Maple or Black Ash fine wood veneers. A beautifully designed optional black pedestal elevates the M22 to an ideal height and aesthetically matches the optional C32 pedestal.
M22 shown in Natural Cherry finish
cast-frame woofer incorporating Revels exclusive Organic Ceramic Composite Cone technology along with a substantial 2-inch diameter M22 woofer also includes a proprietary Dual Neodymium magnetic motor system for tremendous dynamic range and freedom from compression. This remarkable driver also features sophisticated magnetic flux focusing systems, comprising a copper modulation control cap as
flat-wire edge-wound voice coil, the tures gently tapered sides that visu-
Rear panel with placement compensation control, tweeter level control and binding posts
C52 Shown in Maple Finish on optional pedestal
At left, the C52 driver complement: 8-inch woofers 514-inch midrange 1-inch tweeter
As the most important reproducer in a multi-channel surround sound system, the center channel speaker must deliver vocals and dialog with the utmost clarity along with music and special effects, and must also match the tonality of the main left and right front speakers. The Performa C52 center channel loudspeaker is the ideal companion to our F52 and F32 models, delivering a combination of tonal neutrality and outstanding dynamic range, fully up to the task of providing faithful reproduction with todays explosive movie soundtracks and high resolution multi-channel music sources, such as DVD-Audio and SACD. Featuring a pair of 8-inch Organic Ceramic Composite cone high performance woofers, along with a 5 4-inch OCC cone

dome tweeter is housed in the specially-shaped CAI waveguide, which provides optimum acoustic impedance loading along with precise horizontal and vertical dispersion. Together, these components contribute to the virtual acoustic invisibility of the tweeter, which cannot be localized as an individual driver, providing a seamless acoustic blend and a broad and expansive soundstage. The three high order, steep slope crossovers are physically separated to prevent mutual interference, and each C52 is individually hand-tuned to within a fraction of a decibel to match the production reference standard. A rear panel control allows acoustic optimization for stand mounting, on-monitor, and in-cabinet placement. Another control provides high frequency level adjustment in.5 dB increments. The elegant cabinetry is available in your choice of Natural Cherry, Maple or Black Ash natural wood veneers.

C52 crossovers woofer

C52 shown in Natural Cherry finish
midrange driver, the F52 also features our recently developed and proprietary Constant Acoustic Impedance tweeter waveguide technology. The 1-inch aluminum
C52 Rear panel with placement compensation, high frequency level controls and binding posts
C32 Shown in Black Ash Finish on optional pedestal
At left, the C32 driver complement: 514-inch woofers 4-inch midrange 1-inch tweeter
The C32 mates with the F32 floor-standing loudspeaker and the M22 monitor. Featuring broad dispersion, low coloration and consistent off-axis response, the C32 is remarkably versatile, with an adjustable boundary compensation system that provides monitor placement or stand mounting, and even for built-inwall applications. A three-way design, the C32 features a pair of 514-inch woofers and a 4-inch midrange; all magnetically-shielded and equipped with newly developed Organic Composite Ceramic cones for improved transparency, timbral accuracy, and freedom from distorNeodymium magnet motor system, these drivers also incorporate large flat-wire edge-wound voice coils for maximum dynamic range and freedom from dynamic compression. A precision switchedresistor high frequency level control provides exact treble level tuning
for optimal high frequency balance from the 1-inch pure titanium dome tweeter. Precise multi-element highorder crossovers are individually divided on separate circuit boards to prevent degradation due to component interaction. As with all individually tuned to match the production reference standard to within a fraction of a decibel, assuring outstanding consistency and optimal blend with other Revel speakers. Two sets of binding posts provide for bi-amping and biwiring as well. The elegant slim cabinet features sophisticated internal bracing that eliminates cabinetin a choice of three beautiful wood veneer finishes: Natural Cherry, Maple or Black Ash. An optional black pedestal raises the C32 off the floor and also provides optimal tilt toward the listening area.

C32 crossovers woofer

optimum timbral accuracy with on- Revel speaker systems, each C32 is
C32 shown in Maple finish
tion. Featuring a sophisticated Dual induced coloration, and is available
Rear panel with placement compensation, high frequency level controls and binding posts
S30 Shown in Black Finish
At left, the S30 driver complement: 612" woofer 4" full-ranges 1" tweeter
The versatile four-driver S30 surround speaker offers unmatched surround sound envelopment for both motion picture soundtracks and discrete multichannel music recordings, providing a choice of dispersion patterns for optimum listening enjoyment. For movie soundtracks, the S30 provides, in its dipole mode, a diffuse sound field, enveloping the audience in an expansive, ambient surround environment, while minimizing speaker localization even with a large number of listeners. For discrete music recordings, the S30 features a monopole mode, providing the pinpoint imaging that discrete music surround mixes demand. The dispersion mode can be manually selected or activated remotely (depending on system configuration). Featuring a high output 6 2-inch woofer and a 1-inch metal
sound throughout the listening area. The handsome cabinetry features angled baffles in a stylish three-panel configuration and can be wall or ceiling mounted using the integrated mounting system for maximum flexibility. The S30s timbre is carefully tailored to blend seamlessly with all of the Performa loudspeakers, with extended and airy high frequency response to beyond 20kHz. The S30 is available in either a black or white finish to integrate easily with dark or light colored room dcor. The versatile S30 surround speaker can be integrated with select A/V processors or control systems to enable automatic dispersion switching, customized to the user's preferences for various program sources.

S30 crossovers woofer

One of two 4-inch controlled dispersion drivers
Rear panel with binding posts and monopole/ dipole remote switch connection
dome tweeter, the S30 is also equipped with two 4-inch fullrange drivers with dispersion characteristics optimized for consistent
B15a Shown in Natural Cherry Finish

a B15a

At left, the B15a driver
of any listening room introduces significant and degrading response variations caused by room-induced Power. Authority. Control. The Performa B15a subwoofer feano other subwoofer provides, for authoritative low frequency reproduction. Featuring a massive longexcursion, 15-inch driver that is equipped with an inverted metal dome that delivers incredible acoustic output at the very lowest deep bass registers, the B15as prodigious deep bass capabilities movie soundtracks, as well as the newest generation of high resolution music formats, such as DVDAudio and Super Audio Compact Disc (SACD). A built-in 1,000-watt power amplifier featuring a tremendous 40% reserve capacity powers the 15-inch driver, delivering up to 1.4 kilowatts to handle and the lowest musical octaves. Revels extensive research into room acoustics has revealed that even a theoretically ideal subwoofer would fail to provide accurate deep bass response due to the fact that the mere placement of the subwoofer within the confines resonances. Conventional subwoofer trols alone cannot compensate for these inevitable and inescapable timbre response irregularities. Therefore, the Performa B15a subwoofer is equipped with a sophisticated tuning system featuring a three-band parametric equalizer that allows room-induced resonance peaks to be tamed. This and delivers tuneful and musical low bass reproduction without the boomy and irritating one-note bass response typical of conventional subwoofers. Fully adjustable high- and low-pass filters with adjustable slopes are also provided to allow the B15a to seamlessly mate with virtually any combinament flexibility beyond what is typically provided in surround processors. The B15a also includes adjustable spikes for different floor types and is available in a choice of elegant wood veneer finishes: Natural Cherry, Maple or Black Ash.

Driver detail without grille The B15a shown in Maple finish B15a rear panel
tures unique Revel advantages that crossover frequency and level con-
will do justice to the most explosive smooths the response dramatically
the most thunderous special effects tion of loudspeakers with adjust-
All Performa loudspeakers, except the S30, are available in Natural Cherry, Maple or Black Ash veneer finish, as shown below.* The S30 is available in black or white finish with matching grilles (not shown).

PERFORM SPECIFICATIONS

Sensitivity Sensitivity provides an indication of how much amplifier power is required for the loudspeaker to play at satisfactory volume levels. Conservatively rated specifications indicate moderate sensitivity and denote that Revel loudspeakers do not require huge amplifiers to achieve realistic levels in all but the largest rooms. 4 pi anechoic represents testing done in a true anechoic (echo or reflection-free) listening environment. Impedance Impedance indicates whether the speaker system presents a hard or easy load on the amplifier. Moderate minimum impedance values and phase angles signify that almost any amplifier can easily drive Revel Performa loudspeakers. Filters (crossover) Steep filter slopes ensure good acoustical behavior in the crossover regions, with a minimum of acoustical interference, along with low distortion and wide dynamic range. Revel filters feature specially selected components. Woofer and tweeter filter boards are physically independent. F52, F32 and C32 models include a provision for bi-amping or bi-wiring, while all models include rear panel compensation controls. Frequency responses In-room response is a breakthrough measurement that, in a single curve, closely correlates to sound quality and has been a goal of loudspeaker engineers for years. Research, and simple observation, reveals that ubiquitous on-axis response curves often cannot distinguish between two loudspeakers with radically different sound quality. This specification for Revel loudspeakers is even more powerful when it is taken in context with the other measurements presented here. A target response is the ideal response goal and is not flat at the frequency extremes and is used when the ideal reference is not a flat line. A target response must be tailored to the loudspeakers intended application and takes into account the acoustic impact of the loudspeakers location, such as freestanding or placement near a wall. First reflections response is a measure of the response a listener hears that is contributed by the first reflections from the walls, floor, and ceiling. This superb specification indicates that Revel loudspeakers will remain accurate even in the presence of strong reflections.

*Cabinet finish representation is subject to the limitations of the full-color printing process. Actual cabinet finishes may vary.
The listening window response (on-axis) measurement reduces the visual confusion of inaudible local interference, yet still retains full accuracy without using spectral smoothing which results in significant data loss. Studies have shown that the 10 dB low frequency extension specification is the one that best correlates to controlled listening tests. At low frequencies, most loudspeaker/room combinations exhibit significant room gain, which is an increasing rise in level as frequencies decrease. In addition, the 10 dB specification reflects the steepness (i.e., order) of the low-frequency roll-off, which is not significantly indicated in 3 dB specifications.
PERFORMA F52 Sensitivity: Impedance: Filters (crossover): Frequency responses: 87.5 dB SPL, with 2.83 V rms @ 1 m (4 pi anechoic) 6.5 (nominal), 3.5 (minimum @ 373 Hz) 3-way, high-order, acoustic response @ 200 Hz and 2.3 kHz In-room response; 0.5 dB from 33 Hz to 18 kHz In-room response relative to target response; 0.5 dB from 31 Hz to 20 kHz First reflections response; 0.5 dB from 33 Hz to 17 kHz Listening window response; 1.0 dB from 32 Hz to 18 kHz Low frequency extension; 10 dB @ 23 Hz Bandwidth -6 dB @ 25 Hz and 45 KHz Dimensions: width: height: depth: 912" (24.1 cm) 431516" (111.6 cm) (44.5 cm) 1712" (includes grille) Spikes add 112" (3.81 cm) to height Weight: 87.7 lb (39.8 kg) net (without packing) Specifications are subject to change without notice.
PERFORMA F32 Sensitivity: Impedance: Filters (crossover): Frequency responses: 86 dB SPL, with 2.83 V rms @ 1 m (4 pi anechoic) 6.5 (nominal), 3.7 (minimum @ 260 Hz) 3-way, high-order @ 190 Hz and 2.7 kHz In-room response; 1.0 dB from 33 Hz to 16 kHz In-room response relative to target response; 0.75 dB from 34 Hz to 20 kHz First reflections response; 1.0 dB from 33 Hz to 15 kHz Listening window response; 1.5 dB from 31 Hz to 16 kHz Low frequency extension; 10 dB @ 24 Hz Bandwidth -6 dB @ 26 Hz and 50 KHz Dimensions: width: height: depth: 834" (22.2 cm) 4112" (105.4 cm) (38.7 cm) 1514" (includes grille) Spikes add 112" (3.8 cm) to height Weight: 70 lb (31.7 kg) net (without packing) Specifications are subject to change without notice.
PERFORMA M22 Sensitivity: Impedance: Filters (crossover): Frequency responses: 85 dB SPL, with 2.83 V rms @ 1 m (4 pi anechoic) 6.4 (nominal), 4.8 (minimum @ 160 Hz) 2-way, high-order, @ 2.2 kHz In-room response; 1.0 dB from 52 Hz to 16 kHz In-room response relative to target response; 0.75 dB from 46 Hz to 20 kHz First reflections response; 1.5 dB from 50 Hz to 15 kHz Listening window response; 1.5 dB from 45 Hz to 16 kHz Low frequency extension; 10 dB @ 36 Hz Bandwidth; -6 dB @ 41 Hz and 50 KHz Dimensions: width: height: depth: 858" (21.9 cm) (36.8 cm) 1412" 1178" (30.2 cm) (includes grille)

With optional pedestal width: 938" (23.8 cm) height: 391516" (101.4 cm) depth: 1178" (30.2 cm) (includes grille) Weight: 24 lb (10.8 kg) net (each, without packing) With optional pedestal 42 lb (18.9 kg) net (each, without packing) Specifications are subject to change without notice.
PERFORMA C52 Sensitivity: Impedance: Filters (crossover): Frequency responses: 90 dB SPL, with 2.83 V rms @ 1 m (4 pi anechoic) 6 (nominal), 3.1 (minimum) @ 292 Hz 3-way, high-order acoustic response @ 235 Hz and 2 kHz In-room response; 0.5 dB from 65 Hz to 18 kHz Target response; 0.5 dB from 60 Hz to 20 kHz First reflections response; 0.5 dB from 70 Hz to 17 kHz Listening window response; 1.0 dB from 65 Hz to 18 kHz Low frequency extension; 10 dB @ 36 Hz Bandwidth; -6 dB @ 49 Hz and 45 KHz Dimensions: Without spikes* width: 2458" (62.6 cm) height: 1078" (27.6 cm) depth: 10916" (26.8 cm) (includes grille) With optional pedestal width: 2458" (62.6 cm) height: 23" (58.4 cm) depth: 11716" (29.1 cm) (includes grille) Weight: 40.75 lb (18.5 kg) net (without packing) With pedestal 58.75 lb (29.9 kg) net (without packing) Specifications are subject to change without notice.
*Refer to user guide for details on spikes
PERFORMA C32 Sensitivity: Impedance: Filters (crossover): Frequency responses: 86.5 dB SPL, with 2.83 V rms @ 1 m (4 pi anechoic) 5.8 (nominal), 3.3 (minimum) @ 80 Hz 3-way, high-order @ 300 Hz and 2.7 kHz In-room response; 1.0 dB from 70 Hz to 16 kHz In-room response relative to target response; 0.75 dB from 90 Hz to 18 kHz First reflections response; 1.0 dB from 75 Hz to 15 kHz Listening window response; 1.5 dB from 67 Hz to 15 kHz Low frequency extension; 10 dB @ 38 Hz Bandwidth; -6 dB @ 51 Hz and 44 KHz Dimensions: Without spikes* width: 21" (53.3 cm) height: 812" (21.6 cm) depth: 9" (22.9 cm) (includes grille) With optional pedestal (53.3 cm) width: 21" height: 20" (50.8 cm) depth: 11716" (29.1 cm) (includes grille) Weight: 30 lb (13.6 kg) net (without packing) With pedestal 48 lb (21.8 kg) net (without packing) Specifications are subject to change without notice.
PERFORMA S30 Sensitivity: Impedance: 90 dB SPL, with 2.83 V rms @ 1 m (2 pi anechoic) Monopole mode; 6 (nominal), 3 (minimum) @ 3.6 kHz Dipole mode; 6 (nominal), 3 (minimum) @ 355 Hz Filters (crossover): Monopole mode; 2-way, high-order, in-phase @ 2.5 kHz Dipole mode; 2-way, high-order @ 250 Hz Frequency responses: In-room response; 1.5 dB from 85 Hz to 16 kHz In-room response relative to target response; 0.75 dB from 80 Hz to 20 kHz First reflections response; 1.75 dB from 84 Hz to 14 kHz Listening window response; 1.5 dB from 85 Hz to 18 kHz Low frequency extension; 10 dB @ 50 Hz Bandwidth; -6 dB @ 65 Hz and 42 KHz Dimensions: width: height: depth: 14316" (36 cm) 1212" (31.7 cm) 838" (21.2 cm) (includes grilles)

Weight:

36 lb (16 kg) per pair net (without packing) 18 lb (8 kg) individual net (without packing) Specifications are subject to change without notice.
Revel I30 & I20 in-wall speakers also available for surround speaker applications. For more information, please visit www.revelspeakers.com/iseries
PERFORMA B15a SUBWOOFER Low frequency extension: Frequency response: True linear volume displacement: Dimensions: 3 dB @ 18 Hz (up to full-rated power) 20 Hz to fc 0.5 dB, 3 dB @ 18 Hz 275 in3 1734" (45.1 cm) 1834" (47.6 cm) 18516" (46.5 cm) (includes grille) Spikes add 112" (3.8 cm) to height 110 lb (49.9 kg) net (without packing, includes amplifier) At least 1,000 W rms 1,400 W peak Type; Three independent parametric equalizers Frequency; Continuously variable from 18 to 80 Hz Bandwidth; Continuously variable from 0.1 to 1 octave Level; Continuously variable from 14.5 to +6 dB Low-pass filter: Type; Low-pass with ON/OFF switch Slope; Selectable 24 or 48 dB per octave Frequency; Selectable @ 30, 40, 50, 60, 70 or 80 Hz Phase; Continuously variable from 0 to 180 Level; Continuously variable High-pass filter: Type; High-pass, always on Slope; Selectable 12 or 24 dB per octave Frequency; Selectable @ 30, 40, 50, 60, 70 or 80 Hz Inputs: Outputs: Left and right balanced (XLR) and unbalanced (RCA) line level Left and right balanced (XLR) and unbalanced (RCA) high-pass line level to main amplifier Left and right balanced (XLR) and unbalanced (RCA) high-pass line level to auxiliary components Power: Switch: OFF or Auto-ON Specifications are subject to change without notice. width: height: depth:
Weight: AMPLIFIER Output power: Equalization:
OUR PARTNERS We devote a great deal of time and attention to selecting the best people to represent our company and products. The people we choose as dealers, distributors, and representatives share our passion for music and video. They are committed to providing their customers with sound, accurate advice about audio and home theater components. They are professionals who want to make your high-end experience an enjoyable one. More than ever, getting expert advice on component purchase and integration is essential. Our specialist dealers will ensure proper installation, setup, and calibration of your system. As much as any other professional you deal with, your music and theater specialist ensures your satisfaction.
The Revel experience is special. Beyond the enjoyment of one of the worlds most highly prized loudspeakers, it is about the appreciation of fine detail
and high technology. The Performa series offers the performance and beauty of the worlds finest loudspeakers.
Revel is a registered trademark of Harman International Industries, Incorporated. Ferrofluid is a registered trademark of Ferrotec (USA) Corporation. Revel is not responsible for typographic errors. Other company and product names may be trademarks of the respective companies with which they are associated.

Revel Performa loudspeakers are designed and assembled in Northridge, California, USA
3 Oak Park Drive Bedford, MA 01730-1413 USA Tel: 781.280.0300 Fax: 781.280.0490 www.revelspeakers.com
2005 Harman Specialty Group Part Number: 072-17002 Rev.3