V-Cymbal Ride

CY-15R V-Cymbal Crash CY-14C V-Cymbal Hi-Hat CY-12H

Owners Manual

Thank you and congratulations on your choice of the Roland V-Cymbal CY-15R/CY-14C/CY-12H.
Before using this unit, carefully read the sections entitled: USING THE UNIT SAFELY (p. 2) and IMPORTANT NOTES (p. 3). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owners manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference.

Before You Begin

When using a TD-10: 1. Make sure you are using a TDW-1 version that includes with V-Cymbal Control (see p. 4). 2. Select TRIGGER BANK 2 in the TD-10 for use with the V-Cymbals (see p. 9).
* If you are using another sound module, you have to set the trigger parameters. Refer to Trigger Parameter Settings for the Sound Module (p. 10).
How to mount the CY-15R (Ride)/CY-14C (Crash)

fig.01.e

Wing Nut (Tighten it to obtain the desired movement)

Felt Washer

Position the Roland logo on the opposite side of the playing area
Stopper (Be sure to orient it correctly)
Tighten the nut with a commercially available drum key

02457101 01-8-AE3-41N

* For more details, refer to p. 6.
Copyright 2000 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.

USING THE UNIT SAFELY

Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly. Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly. * Material damage refers other adverse effects respect to the home furnishings, as well animals or pets. to damage or caused with and all its to domestic
The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled. The q symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet.
Before using this unit, make sure to read the instructions below, and the Owners Manual....
Do not allow any objects (e.g., flammable material, coins, pins); or liquids of any kind (water, soft drinks, etc.) to penetrate the unit.
Do not open or perform any internal modifications on the unit....
Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the "Information" page....

In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit....

Do not drop it!....

Never use or store the unit in places that are: Subject to temperature extremes (e.g., direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are Damp (e.g., baths, washrooms, on wet floors); or are Humid; or are Exposed to rain; or are Dusty; or are Subject to high levels of vibration....
Try to prevent cords and cables from becoming entangled. Also, all cords and cables should be placed so they are out of the reach of children....
Never climb on top of, nor place heavy objects on the unit....
This unit should be used only with a rack or stand that is recommended by Roland....
Should you remove the stopper bolt, make sure to put them in a safe place out of children's reach, so there is no chance of them being swallowed accidentally....
When using the unit with a rack or stand recommended by Roland, the rack or stand must be carefully placed so it is level and sure to remain stable. If not using a rack or stand, you still need to make sure that any location you choose for placing the unit provides a level surface that will properly support the unit, and keep it from wobbling....

IMPORTANT NOTES

In addition to the items listed under USING THE UNIT SAFELY on page 2, please read and observe the following:

Additional Precautions

Use a reasonable amount of care when using the units jacks. Rough handling can lead to malfunctions.

Placement

Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Also, do not allow lighting devices that normally are used while their light source is very close to the unit (such as a piano light), or powerful spotlights to shine upon the same area of the unit for extended periods of time. Excessive heat can deform or discolor the unit.

When connecting / disconnecting all cables, grasp the connector itselfnever pull on the cable. This way you will avoid causing shorts, or damage to the cables internal elements.
To avoid possible breakdown, do not use the unit in a wet area, such as an area exposed to rain or other moisture.
This instrument is designed to minimize the extraneous sounds produced when its played. However, since sound vibrations can be transmitted through floors and walls to a greater degree than expected, take care not to allow these sounds to become a nuisance to neighbors, especially when performing at night and when using headphones.

Maintenance

When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials.
For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to wipe the unit thoroughly with a soft, dry cloth.
Use the included cable to make connections. If using some other make of connection cable, please note the following precautions. Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. Since the sensitivity of the pad will be diminished, the sound may become extremely soft or even inaudible. For information on cable specifications, contact the manufacturer of the cable.
Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation.

Getting Started

Features
Similar touch and feel as with acoustic cymbals
The superior design has taken into account not only the shape of the cymbal, but also the bounce of the stick, and even the movement caused by playing, making it possible to play with the same feel as an acoustic cymbal.

About the TDW-1

TDW-1 is an expansion board for TD-10. This adds new sounds (360 tones and 50 kits) and functions to TD-10. There are two versions of the TDW-1 (Original version and TDW-1 with V-Cymbal Control version). The TDW-1 with V-Cymbal Control provides trigger types exclusively for the V-Cymbals. This makes it possible to use three way triggering and positional sensing on the CY-15R (Ride), enabling the expressive power of the VCymbal to be used to the fullest. When using the V-Cymbals, Roland suggests using the TD-10 + TDW-1 with V-Cymbal Control as the sound module. * The screen displayed when powering up with the TDW-1 with V-Cymbal Control installed, is different than the Original version. Original Version

fig.TDW1old_80

Theyre quiet!
Rubber is used on the striking surface for a damping effect.
Edge shots and choking are possible
Sensors in the edge portion make it possible to get different sounds by striking the bow (upper surface) and the edge. Choke playstopping the sound by grasping the edge portionis also possible (p. 8). On the CY-15R (Ride), sensors in the bell portion make it possible to get different sounds by striking the bow (upper surface) and the bell (p. 8).
TDW-1 with V-Cymbal Control

fig.TDW1new_80

Three way triggering and positional sensing are possible (When using the TDW-1 with V-Cymbal Control)
Using the CY-15R (Ride) together with the TD-10 upgraded with the TDW-1 with V-Cymbal Control makes it possible to get different tones from the positional sensing of the bow portion (p. 8), and from three play methods: bow shot, bell shot, and edge shot (Three Way Triggering, see p. 9).

Whats in the Package

CY-15R (Ride)
CY-15R unit, Wing nut, Felt washer, Stopper, Connection cable (stereo) x 2, Cable tie, Owners manual (this document)
Compatible with all Roland sound modules
Compatible models: TD-10 + TDW-1, TD-10, TD-8, TD-7, TD-5, SPD-20/11, and HPD-15 Roland sound modules support methods of play such as edge shots and choke play (p. 11). * You have to set the trigger parameters. For details, refer to Trigger Parameter Settings for the Sound Module (p. 10).

CY-14C (Crash)

CY-14C unit, Wing nut, Felt washer, Stopper, Connection cable (stereo), Cable tie, Owners manual (this document)

CY-12H (Hi-Hat)

CY-12H unit, Connection cable (stereo), Owners manual (this document)
Definitions & Names of Parts

fig.02.e

Wing Nut Felt Washer
Stopper Bell Portion BOW/BELL OUTPUT Jack Bow Portion Edge Portion BOW/EDGE OUTPUT Jack

Diameter: 15 inches

fig.02a.e

Stopper

Bow Portion Edge Portion

BOW/EDGE OUTPUT Jack

* The CY-14C has no BOW/BELL OUTPUT Jack.

Diameter: 14 inches

fig.03.e
Bow Portion Edge Portion OUTPUT Jack Stand Fixing Screw

Diameter: 12 inches

Mounting on the Stand
CY-15R (Ride) CY-14C (Crash)
1. Use a commercially available drum key to tighten the stopper bolt. The stopper keeps the V-Cymbal from turning, and prevents the cables from catching or getting tangled on the stand.

fig.04.e

Bell Shot (CY-15R Only)

This playing method involves striking the bell. On the CY15R, when played as shown in the figure, the rim-side sound of the connected input is triggered.

fig.11

The CY-15R and CY-14C are capable of the positional detection feature. Positional detection is possible when plugged into the specified input on a Roland sound module with this feature.
* Strike the bell somewhat strongly with the shoulder of the stick. * Bell shots are possible when the connection is made to the CY15Rs BOW/BELL output. * On the CY-12H and the CY-14C, bell shots are not supported.
For TDW-1 with V-Cymbal Control Users
Playing Different Sounds with the CY-15Rs Bow, Bell, and Edge (Three Way Triggering Feature)
When you use the TDW-1 with V-Cymbal Control, which completely supports the V-Cymbal, three way triggering (bow, bell, and edge shot) performances that use both outputs on the CY-15R are possible.
The Original version of the TDW-1 and the non-expanded TD-10 do NOT support three way triggering (p. 11).

Connection Examples

As shown below, connect the two outputs on the CY-15R to the two trigger inputs on the TD-10 (TDW-1 with V-Cymbal Control) and make the settings for the corresponding trigger types.

fig.14.e

TD-10 (TDW-1 with V-Cymbal Control)

AUX 1 RIDE

Trigger Type Settings
TRIGGER BANK 2s factory defaults are set for using the three way triggering feature.
Correspondences Between Playing Methods and Trigger Input
Playing Methods TRIG INPUT 10/RIDE HEAD 10/RIDE RIM 11/AUX 1 RIM
How to Select the Trigger Bank
1. Press [SETUP] - [F1 (TRIG)] - [F1 (BANK)]. 2. Select the BANK 2 by turning the VALUE dial. OUTPUT BOW/BELL BOW/EDGE TRIG INPUT 10/RIDE 11/AUX 1 TRIGGER TYPE RdA (CY-15R Position) CTR (CY-15R CONTROL)
Bow Shot Bell Shot Edge Shot
Head-side tones for the trigger input 11/AUX 1 cannot be sounded.
If you connect a pad or a V-Cymbal ONLY to the trigger input for which trigger type is set to CTR (11/AUX 1), it will NOT work.
If you are using a sound module other than the TD-10 + TDW-1 with VCymbal Control (such as a non-expanded TD-10 or the Original version of TDW-1), then use either the BOW/BELL output or the BOW/EDGE output, but NOT both (p. 7). When the two outputs are used simultaneously, the two sounds of the connected trigger inputs are sounded at the same time. * For more details on three way triggering feature, refer to the owners manual for the TDW-1 with V-Cymbal Control.

Trigger Parameter Settings for the Sound Module
You may need to adjust the value since these are just the reference value.
CY-12H CY-14C PD3 Linear 1.CY-15R PD3 Linear 1.Pad Type (Trigger Type) Sensitivity PD3 Linear 1.8 40
CY-12H Trigger Type Sensitivity Threshold Curve * * HH Linear CY-14C CrB Linear CY-15R RdA Linear
Threshold Curve Scan Time Retrigger Cancel Mask Time Crosstalk Cancel *
Trigger parameters of TRIGGER BANK 2 at the factory defaults are set for using the V-Cymbals. TDW-1 with V-Cymbal Control provides trigger types exclusively for the V-Cymbals. Advanced Trigger Parameters (e.g. Scan Time) are set automatically when you set the trigger type. When using the CY-15Rs three way triggering, refer to p. 9.
You need to set each Advanced Trigger Parameter (e.g. Scan Time) after setting the trigger type.
CY-12H Cross Talk Group Velocity Curve 1 Norm3 ON 1 CY-14C 1 Norm3 ON 1 CY-15R 1 Norm3 ON 1
TD-10 (TDW-1 Original Version)
CY-12H Trigger Type Sensitivity Threshold Curve Scan Time Retrigger Cancel Mask Time Xtalk Cancel Mount Type * P7B Linear 1.CymMount CY-14C P7B Linear 1.CymMount CY-15R P7B Linear 1.CymMount
Choke Max Dyna Min Dyna Min Velo Mask Time Threshold *
Each trigger parameter can be set independently for the head-side and rim-side. Set to the same value for the head and rim. Also trigger parameters can be set in each patch.
CY-12H CY-14C P2 Lnr 1.CY-15R P2 Lnr 1.Trigger Type Sensitivity P2 Lnr 1.12 50

TD-10 (Non-expanded)

CY-12H Trigger Type Sensitivity Threshold Curve Scan Time Retrigger Cancel Mask Time Crosstalk Cancel * PD3 Linear 1.CY-14C PD3 Linear 1.CY-15R PD3 Linear 1.8 40

SPD-20

CY-12H Trig Sens Trig Threshold Trig Type Trig Curve PdCY-14C PdCY-15R Pd5 0

HPD-15

CY-12H Input Mode Trig Type Trig Sens Curve Threshold Scan Time HD/RM PD-Linear 40 CY-14C HD/RM PD-Linear 40 CY-15R HD/RM PD-Linear 40

SPD-11

CY-12H Trig Sens Trig Threshold Trig Mask Time Trig Scan Time CY-14C CY-15R 8 10
Retrig Cancel Mask Time X-Talk Rate
Playing Techniques Supported by Various Sound Modules
CY-15R/14C/12H Bow/Edge Shot TD-10 (TDW-1 with V-Cymbal Control) TD-10 (TDW-1 Original Version) TD-10 (Non-expanded) TD-8/7/5 SPD-20/11 HPD-15 * For more on TDW-1, refer to p. 4. o o o o o o CY-15R Bow/Bell Shot o o o o o o CY-15R CY-15R/14C Three Way Triggering Positional Sensing o x x x x x o x x x x x CY-15R/14C/12H Choke Play o o o o o x

Troubleshooting

Check these first
Is the trigger type set correctly?
Make the trigger parameter settings for your sound module. * Refer to Trigger Parameter Settings for the Sound Module (p. 10).
The sound does not change when a bell shot is made
The connection is to the BOW/EDGE output.
Make the connection to the BOW/BELL output to enable the CY-15R to support bell shots. * The CY-14C and CY-12H do not support bell shots.
Is a monaural cable being used?
When a monaural cable is used, the sound does not change when an edge shot or a bell shot is made. Choke play is not possible, either. Use a stereo cable.
Strike the bell somewhat strongly with the shoulder of the stick.
The sound may not change when the bell is struck with the tip of the stick.
Ride cymbal sounds odd (Other cymbal sound is heard simultaneously)
Is the TDW-1 with V-Cymbal Control being used?
Use a TD-10 equipped with a TDW-1 with V-Cymbal Control. If using a sound module other than a TD-10 equipped with the TDW-1 with V-Cymbal Control, connect either the CY-15R's Bow/Bell Output, or the Bow/Edge Output, but not both, to the TD-10 (p. 7).
Choke play is not possible
Choke an area where an edge sensor is located.
The CY-15R and CY-14C have edge sensors only at the areas closest to you, at the front (p. 8).

Sounds play twice

Are any of the cables touching the units (VCymbals)?
Secure the cables in place with the cable ties so that they do not touch the units. Also, be careful to make sure that the cables are not pulled by the movement of a cymbal when struck (p. 6).
Is TRIGGER BANK 2 selected?
Set to the trigger bank 2 factory settings. * Only the factory-default settings of trigger bank 2 can be copied.
[SETUP] - [F1 (TRIG)] - [F1 (BANK)] - [TOOLS] - [F1 (COPY)]
Are the stopper, felt washer, and wing nut attached correctly?
Double triggering may occur if the stopper and/or wing nut is loose. Use a drum key to tignten properly. * If double triggering still occurs, try adjusting trigger parameters, such as Retrigger Cancel, on the sound module you are using (TD-10, etc.).

No sound is heard

The trigger type is set to CTR (TDW-1 with V-Cymbal Control only).
When the trigger type is set to CTR, the head-side sound will not be heard (p. 9). Set the trigger type to a pad that you are using, such as RdA or CrB.
The sound does not vary when the striking position changes
The CY-15R and CY-14C are capable of the positional detection feature. Positional detection is possible when plugged into the specified input on a Roland sound module with this feature. Sounds that change according to playing position are certain ride cymbal tones. For more information, refer to the instrument list in the owners manual for the sound module. With trigger types RdB and CrB, positional sensing is not possible. Use RdA or CrA. * The CY-12H does not support positional sensing.

The sound does not change when an edge shot is made
The connection is to the BOW/BELL output.
Make the connection to the BOW/EDGE output to enable the CY-15R to support edge shots.
Strike an area where an edge sensor is located.
The Volume Level is Too Low
Striking the cymbal units when turning on the power of the sound module (TD-10, etc.) degrades the unit response when the units are struck lightly. Do not strike any cymbal units when turning on the power.

Specifications

Size: Trigger: Connectors: 15 inches 3 (Bow/Bell/Edge) * When the TDW-1 with V-Cymbal Control is not being used, select Bow/Bell or Bow/Edge. BOW/BELL Output Jack, BOW/EDGE Output Jack 14-13/16 (W) x 14-13/16 (D) x 2 (H) inches Weight: 1.6 kg 3 lbs 9 oz Accessories: Owners Manual, Wing Nut, Felt Washer, Stopper, Connection Cable x 2, Cable Tie Options: Cymbal Mount (MDY-10U)
Dimensions: 376 (W) x 376 (D) x 50 (H) mm
Size: Trigger: Connector: 14 inches 2 (Bow/Edge) BOW/EDGE Output Jack 13-7/8 (W) x 13-7/8 (D) x 1-15/16 (H) inches Weight: 1.4 kg 3 lbs 2 oz Accessories: Owners Manual, Wing Nut, Felt Washer, Stopper, Connection Cable, Cable Tie Options: Cymbal Mount (MDY-10U)
Dimensions: 352 (W) x 352 (D) x 48 (H) mm
Size: Trigger: Connector: 12 inches 2 (Bow/Edge) BOW/EDGE Output Jack 11-15/16 (W) x 11-15/16 (D) x 4-5/8 (H) inches Weight: 1.8 kg 4 lbs Accessories: Owners Manual, Connection Cable Options:
Dimensions: 302 (W) x 302 (D) x 116 (H) mm

Pad Mount (MDH-10U)

* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below.

Information

AFRICA

Al Fanny Trading Office

P.O. Box 2904, El Horrieh Heliopolos, Cairo, EGYPT TEL: (02) 4185531

SINGAPORE

Swee Lee Company
150 Sims Drive, SINGAPORE 387381 TEL: 846-3676

PANAMA

SUPRO MUNDIAL, S.A.
Boulevard Andrews, Albrook, Panama City, REP. DE PANAMA TEL: (507) 315-0101

Roland Italy S. p. A.

Viale delle Industrie 8, 20020 Arese, Milano, ITALY TEL: (02) 937-78300

ISRAEL

Halilit P. Greenspoon & Sons Ltd.
8 Retzif Ha'aliya Hashnya St. Tel-Aviv-Yafo ISRAEL TEL: (03) 6823666

CRISTOFORI MUSIC PTE LTD

Blk 3014, Bedok Industrial Park E, #02-2148, SINGAPORE 489980 TEL: 243 9555

PARAGUAY

Distribuidora De Instrumentos Musicales
J.E. Olear y ESQ. Manduvira Edeficio, El Dorado Planta Baja Asuncion PARAGUAY TEL: 595-21-492147

NORWAY

Roland Scandinavia Avd. Kontor Norge
Lilleakerveien 2 Postboks 95 Lilleaker N-0216 Oslo NORWAY TEL: 273 0074

JORDAN

AMMAN Trading Agency
Prince Mohammed St. P.O. Box 825 Amman 11118 JORDAN TEL: (06) 4641200

REUNION

Maison FO - YAM Marcel
25 Rue Jules Hermann, Chaudron - BP491 Ste Clotilde Cedex, REUNION ISLAND TEL: 16

TAIWAN

ROLAND TAIWAN ENTERPRISE CO., LTD.
Room 5, 9fl. No. 112 Chung Shan N.Road Sec.2, Taipei, TAIWAN, R.O.C. TEL: (02) 2561 3339

VIDEO Broadcast S.A.

Portinari 199 (ESQ. HALS), San Borja, Lima 41, REP. OF PERU TEL: 51-14-758226

POLAND

P. P. H. Brzostowicz
UL. Gibraltarska 4. PL-03664 Warszawa POLAND TEL: (022) 19

KUWAIT

Easa Husain Al-Yousifi
Abdullah Salem Street, Safat KUWAIT TEL: 5719499

SOUTH AFRICA

That Other Music Shop (PTY) Ltd.
11 Melle St., Braamfontein, Johannesbourg Republic of SOUTH AFRICA P.O.Box 32918, Braamfontein 2017 Republic of SOUTH AFRICA TEL: (011) 403 4105

THAILAND

Theera Music Co. , Ltd.
330 Verng NakornKasem, Soi 2, Bangkok 10100, THAILAND TEL: (02) 2248821

PORTUGAL

Tecnologias Musica e Audio, Roland Portugal, S.A.
Cais Das Pedras, 8/9-1 Dto 4050-465 PORTO PORTUGAL TEL: (022) 60

LEBANON

A. Chahine & Fils
P.O. Box 16-5857 Gergi Zeidan St. Chahine Building, Achrafieh Beirut, LEBANON TEL: (01) 335799

URUGUAY

Todo Musica S.A.
Cuareim 1844, Montevideo, URUGUAY, CP11200 TEL: 5982-924-2335

VIETNAM

Saigon Music
138 Tran Quang Khai St., District 1 Ho Chi Minh City VIETNAM TEL: (08) 844-4068

Al Emadi Co. (Badie Studio & Stores)
P.O. Box 62, DOHA QATAR TEL: 4423-554

VENEZUELA

Musicland Digital C.A.
Av. Francisco de Miranda, Centro Parque de Cristal, Nivel C2 Local 20 Caracas VENEZUELA TEL: (02) 285 9218

Paul Bothner (PTY) Ltd.

17 Werdmuller Centre Claremont 7700 Republic of SOUTH AFRICA P.O. Box 23032 Claremont, Cape Town SOUTH AFRICA, 7735 TEL: (021) 674 4030

ROMANIA

FBS LINES
Piata Libertatii 1, RO-4200 Gheorghehi TEL: (066) 164-609

AUSTRALIA/ NEW ZEALAND

AUSTRALIA
Roland Corporation Australia Pty., Ltd.
38 Campbell Avenue Dee Why West. NSW 2099 AUSTRALIA TEL: (02) 9982 8266

RUSSIA

3-Bogatyrskaya Str. 1.k.l Moscow, RUSSIA TEL: 5043

SAUDI ARABIA

aDawliah Universal Electronics APL
Corniche Road, Aldossary Bldg., 1st Floor SAUDI ARABIA P.O.Box 2154, Alkhobar 31952 SAUDI ARABIA TEL: (03) 898 2081

EUROPE

AUSTRIA
Roland Austria GES.M.B.H.
Siemensstrasse 4, P.O. Box 74, A-6063 RUM, AUSTRIA TEL: (0512) 260
Beijing Xinghai Musical Instruments Co., Ltd.
6 Huangmuchang Chao Yang District, Beijing, CHINA TEL: (010) 6774 7491
Roland Electronics de Espaa, S. A.
Calle Bolivia 239, 08020 Barcelona, SPAIN TEL: (93) 308 1000

NEW ZEALAND

Roland Corporation Ltd.
32 Shaddock Street, Mount Eden, Auckland, NEW ZEALAND TEL: (09) 3098 715
BELGIUM/HOLLAND/ LUXEMBOURG Roland Benelux N. V.
Houtstraat 3, B-2260, Oevel (Westerlo) BELGIUM TEL: (014) 575811
Technical Light & Sound Center
Khaled Ibn Al Walid St. P.O. Box 13520 Damascus - SYRIA TEL: (011) 2235 384

SWEDEN

Roland Scandinavia A/S SWEDISH SALES OFFICE
Danvik Center 28, 2 tr. S-Nacka SWEDEN TEL: (08) 702 0020
Shanghai Xingtong Acoustics Equipment CO.,Ltd.
Rm.1108, No.2240 Pudong South Road Shanghai, CHINA TEL: (021) 6873 4123

HONG KONG

Tom Lee Music Co., Ltd. Service Division
22-32 Pun Shan Street, Tsuen Wan, New Territories, HONG KONG TEL: 2415 0911

CENTRAL/LATIN AMERICA

ARGENTINA
Instrumentos Musicales S.A.
Florida 656 2nd Floor Office Number 206A Buenos Aires ARGENTINA, CP1005 TEL: (54-11) 4- 393-6057

DENMARK

Roland Scandinavia A/S
Nordhavnsvej 7, Postbox 880, DK-2100 Copenhagen DENMARK TEL: (039)16 6200

TURKEY

Barkat muzik aletleri ithalat ve ihracat Ltd Sti
Siraselviler cad.Guney is hani 8486/6, Taksim. Istanbul. TURKEY TEL: (0212) 2499324

SWITZERLAND

Roland (Switzerland) AG Musitronic AG
Gerberstrasse 5, Postfach, CH-4410 Liestal, SWITZERLAND TEL: (061) 921 1615

FRANCE

Roland France SA
4, Rue Paul Henri SPAAK, Parc de l'Esplanade, F St. Thibault, Lagny Cedex FRANCE TEL: 73 500

U.A.E.

Zak Electronics & Musical Instruments Co. L.L.C.
Zabeel Road, Al Sherooq Bldg., No. 14, Grand Floor DUBAI U.A.E. TEL: (04) 3360715

UKRAINE

TIC-TAC
Mira Str. 19/108 P.O. Box Munkachevo, UKRAINE TEL: (03131) 414-40
Rivera Digitec (India) Pvt. Ltd.
409, Nirman Kendra Mahalaxmi Flats Compound Off. Dr. Edwin Moses Road, Mumbai-400011, INDIA TEL: (022) 498 3079

BRAZIL

Roland Brasil Ltda
Rua San Jose, 780 Sala B Parque Industrial San Jose Cotia - Sao Paulo - SP, BRAZIL TEL: (011) 4615 5666

FINLAND

Roland Scandinavia As, Filial Finland
Lauttasaarentie 54 B Fin-00201 Helsinki, FINLAND TEL: (9) 682 4020

UNITED KINGDOM

Roland (U.K.) Ltd.
Atlantic Close, Swansea Enterprise Park, SWANSEA SA7 9FJ, UNITED KINGDOM TEL: (01792) 700139

NORTH AMERICA

CANADA
Roland Canada Music Ltd. (Head Office)
5480 Parkwood Way Richmond B. C., V6V 2M4 CANADA TEL: (0604) 270 6626

INDONESIA

PT Citra IntiRama
J1. Cideng Timur No. 15J-150 Jakarta Pusat INDONESIA TEL: (021) 6324170

COSTA RICA

JUAN Bansbach Instrumentos Musicales
Ave.1. Calle 11, Apartado 10237, San Jose, COSTA RICA TEL: (506)258-0211

GERMANY

Roland Elektronische Musikinstrumente HmbH.
Oststrasse 96, 22844 Norderstedt, GERMANY TEL: (040) 52 60090

MIDDLE EAST

BAHRAIN

Moon Stores

Bab Al Bahrain Road, P.O. Box 20077 State of BAHRAIN TEL: 211 005

Cosmos Corporation

1461-9, Seocho-Dong, Seocho Ku, Seoul, KOREA TEL: (02) 3486-8855
Roland Canada Music Ltd. (Toronto Office)
Unit 2, 109 Woodbine Downs Blvd, Etobicoke, ON M9W 6Y1 CANADA TEL: (0416) 213 9707

Comercial Fancy S.A.

Avenida Rancagua #0330 Providencia Santiago, CHILE TEL: 56-2-373-9100

GREECE

STOLLAS S.A. Music Sound Light
155, New National Road 26422 Patras, GREECE TEL: 061-435400

MALAYSIA

BENTLEY MUSIC SDN BHD
140 & 142, Jalan Bukit Bintang 55100 Kuala Lumpur,MALAYSIA TEL: (03) 2144-3333

U. S. A.

Roland Corporation U.S.
5100 S. Eastern Avenue Los Angeles, CA 90040-2938, U. S. A. TEL: (323) 890 3700

EL SALVADOR

OMNI MUSIC
75 Avenida Notre YY Alameda, Juan Pablo 2, No. 4010 San Salvador, EL SALVADOR TEL: (503) 262-0788

CYPRUS

Radex Sound Equipment Ltd.
17 Diagorou St., P.O. Box 2046, Nicosia CYPRUS TEL: (02) 453 426

HUNGARY

Intermusica Ltd.
Warehouse Area DEPO Pf.83 H-2046 Torokbalint, HUNGARY TEL: (23) 511011
PHILIPPINES G.A. Yupangco & Co. Inc.
339 Gil J. Puyat Avenue Makati, Metro Manila 1200, PHILIPPINES TEL: (02) 899 9801

MEXICO

Casa Veerkamp, s.a. de c.v.
Av. Toluca No. 323, Col. Olivar de los Padres 01780 Mexico D.F. MEXICO TEL: (525) 80

MOCO, INC.

No.41 Nike St.Dr.Shariyati Ave. Roberoye Cerahe Mirdamad Tehran, IRAN TEL: 285 4169

IRELAND

Roland Ireland
Audio House, Belmont Court, Donnybrook, Dublin 4. Republic of IRELAND TEL: (01) 2603501
As of May 15, 2001 (Roland)