RESETS.TXT FACTORY RESET PROCEDURES / RESET SEQUENCES 01/26/03
MAKE MODEL =========================================================================== ALESIS QUADRAVERB HOLD BYPASS AND PROGRAM THEN POWER ON. ALESIS SR-16 HOLD PLAY AND ERASE THEN POWER ON. ART BCC HOLD STORE, PARAMETER, AND VALUE BUTTONS + POWER ON. ART ECC HOLD STORE, PARAMETER, AND VALUE BUTTONS + POWER ON. ART PRO GATE PRESS BYPASS, 8, AND SELECT SIMULTANEOUSLY. ART PROVERB no reset. remove battery for more than 5 hours. ART PROVERB 200 no reset. remove battery for more than 5 hours. ART SGE HOLD PRESET DOWN, ADD EFFECT, AND MIDI/UTILITY W HILE POWERING ON. DIGITECH DHP 33 PRESS UTILITY BUTTON, SCROLL TO THE FACTORY REST ORE MENU, TURN EITHER DATA KNOB COUNTER-CLOCK WISE, THEN PRESS STORE. DIGITECH DHP 55 PRESS UTILITY BUTTON, SCROLL TO THE FACTORY REST ORE MENU, PRESS PARAMETER EDIT, THEN LOAD. DIGITECH DSP 128 HOLD PARAMETER EFFECT AND SELECT, THEN POWER ON. DIGITECH DSP 128+ HOLD PARAMETER DOWN AND LEFT, THEN POWER ON. DIGITECH DSP 256 HOLD UTILITY, POWER ON, THEN PRESS PARAMETER UP. DIGITECH DSP 256XL HOLD UTILITY, POWER ON, THEN PRESS PARAMETER UP. DIGITECH FX 7 PRESS/HOLD STORE, POWER ON, WAIT UNTIL "RS" APPE ARS IN THE DISPLAY THEN RELEASE STORE. DIGITECH G7 PRESS AND HOLD PROGRAM, POWER ON THEN PRESS THE STORE BUTTON. Page 1
RESETS.TXT DIGITECH GFX 1 HOLD UTILITY BUTTON, POWER ON, THEN PRESS PARAME TER UP. DIGITECH GSP 21 HOLD TITLE BUTTON, POWER ON. DIGITECH GSP 21 LEGEND HOLD UTILITY BUTTON, POWER ON, THEN PRESS PARAME TER UP. DIGITECH GSP 21 PRO HOLD UTILITY BUTTON, POWER ON, THEN PRESS PARAME TER UP. DIGITECH GSP 2112 HOLD THE PREAMP BUTTON, POWER ON. WHEN THE ASTER ISK APPEARS IN THE TOP OF THE DISPLAY, PRESS THE MOD BUTTON. DIGITECH GSP 5 HOLD PARAMETER DOWN THEN POWER ON. DIGITECH GSP 7 HOLD UTILITY BUTTON, POWER ON, THEN PRESS PARAME TER UP. DIGITECH GSP2101 HOLD ACCESS 1 BUTTON, POWER ON. AFTER * APPEARS IN THE UPPER LEFT OF THE LCD PRESS PROGRAM UP DIGITECH IPS 33 HOLD BOTH FUNCTION SELECT BUTTONS THEN POWER ON. DIGITECH IPS 33B PRESS UTILITY BUTTON, SCROLL TO THE FACTORY REST ORE MENU, PRESS PARAMETER DOWN, THEN STORE. DIGITECH LEGEND II HOLD STORE, POWER ON. AFTER * APPEARS IN THE UPP ER LEFT CORNER OF THE LCD PRESS PARAMETER UP. DIGITECH MEQ 14 HOLD PROGRAM BUTTON THEN POWER ON. DIGITECH MEQ 28 HOLD PROGRAM BUTTON THEN POWER ON. DIGITECH MEQ 7 HOLD PROGRAM BUTTON THEN POWER ON. DIGITECH MSP 4 HOLD THE DOWN AND LEFT BUTTONS THEN POWER ON. DIGITECH PMC 10 PRESS AND HOLD FOOTSWITCH "ONE", POWER ON, THEN PRESS THE "SELECT" FOOTSWITCH. DIGITECH RP 1 HOLD UTILITY BUTTON, POWER ON, THEN PRESS PARAME TER UP. DIGITECH RP 10 Page 2
RESETS.TXT HOLD NAME, POWER ON. AFTER * APPEARS IN THE UPPE R LEFT CORNER OF LCD PRESS PROGRAM UP. DIGITECH RP 12 HOLD NAME, POWER ON. AFTER * APPEARS IN THE UPPE R LEFT CORNER OF LCD PRESS PROGRAM UP. DIGITECH RP 5 HOLD PARAMETER SELECT UP BUTTON THEN POWER ON. DIGITECH RP 6 HOLD PARAMETER SELECT UP BUTTON THEN POWER ON. DIGITECH S-5000 PRESS UTILITY BUTTON, SCROLL TO THE FACTORY REST ORE MENU, PRESS PARAMETER EDIT, THEN LOAD. DIGITECH STUDIO 400 PRESS AND HOLD THE "1" BUTTON, POWER ON. WHEN TH E ASTERISK APPEARS IN THE TOP OF THE DISPLAY, PRESS PROGRAM. DIGITECH STUDIO QUAD PRESS AND HOLD THE "1" BUTTON, POWER ON. WHEN TH E ASTERISK APPEARS IN THE TOP OF THE DISPLAY, PRESS PROGRAM. DIGITECH SV 5 PRESS UTILITY BUTTON, SELECT THE INIT MENU, PRES S THE STORE BUTTON TWICE (AS PROMPTED). DIGITECH TEC 8 PRESS AND HOLD BOTH LOW EQ AND MID EQ, POWER ON. DIGITECH TSR 12 HOLD NAME + POWER ON. AFTER * APPEARS IN THE UPP ER LEFT CORNER OF LCD PRESS PROGRAM UP. DIGITECH TSR 24 HOLD ACCESS 1 BUTTON, POWER ON. AFTER * APPEARS IN THE UPPER LEFT OF THE LCD PRESS PROGRAM UP. DIGITECH TSR 6 PRESS AND HOLD EQ BUTTON, POWER ON. WAIT FOR "FA " TO APPEAR IN THE DISPLAY THEN PRESS STORE. NOTE: "FH" WILL APPEAR BRIEFLY TO ACKNOWLEDGE. DIGITECH VALVE FX HOLD STORE, POWER ON. AFTER * APPEARS IN THE UPP ER LEFT CORNER OF LCD PRESS PARAMETER UP. DIGITECH VHM 5 PRESS UTILITY BUTTON, SCROLL TO THE FACTORY REST ORE MENU, PRESS PARAMETER DOWN, THEN STORE. DIGITECH VOCALIST II PRESS UTILITY BUTTON, SCROLL TO THE FACTORY REST ORE MENU, PRESS PARAMETER DOWN, THEN STORE. DIGITECH XP PEDALS PRESS/HOLD THE BYPASS/(HOLD)TUNER FOOTSWITCH AND POWER ON. Page 3

RESETS.TXT ENSONIQ DP-PRO HOLD SYSTEM BUTTON AND PRESS CANCEL. RELEASE BOT H BUTTONS, PRESS ENTER. ENSONIQ DP/2 HOLD SYSTEM/MIDI AND PRESS THE "B" BUTTON, THEN RELEASE BOTH. PRESS RIGHT ARROW ONCE. PRESS W RITE BUTTON AT PROMPT. ENSONIQ DP/4 HOLD SYSTEM/MIDI AND PRESS THE "B" BUTTON, THEN RELEASE BOTH. PRESS RIGHT ARROW ONCE. PRESS W RITE BUTTON AT PROMPT. ENSONIQ DP/4+ HOLD SYSTEM/MIDI AND PRESS THE "B" BUTTON, THEN RELEASE BOTH. PRESS RIGHT ARROW ONCE. PRESS W RITE BUTTON AT PROMPT. ENSONIQ ESQ-M PRESS PARAM, PRESS STORAGE. HOLD SCROLL, PRESS M ASTER. RELEASE BOTH, SCROLL TO SELECT MEMORY PRESET PAGE. HOLD SCROLL, PRESS STORAGE. RELEASE BOTH, PRESS ( [ ). ENSONIQ FIZMO HOLD THE SAVE BUTTON AND PRESS COMPARE. PRESS TH E YES BUTTON AT THE PROMPT. ENSONIQ FIZMO RACK HOLD THE SAVE BUTTON AND PRESS COMPARE. PRESS TH E YES BUTTON AT THE PROMPT. ENSONIQ KS-32 PRESS EDIT/SEQUENCES (PRESETS). PRESS AND HOLD B ANK 9 (SYSTEM) AND THEN PRESS SCREEN 9. RELEA SE BOTH AND PRESS YES AT THE PROMPT. ENSONIQ KT-76 PRESS EDIT/SEQUENCES (PRESETS). PRESS AND HOLD T HE UPPER 9 BUTTON AND THEN PRESS THE LOWER 9. RELEASE BOTH AND PRESS YES AT THE PROMPT. ENSONIQ KT-88 PRESS EDIT/SEQUENCES (PRESETS). PRESS AND HOLD T HE UPPER 9 BUTTON AND THEN PRESS THE LOWER 9. RELEASE BOTH AND PRESS YES AT THE PROMPT. ENSONIQ MR-61/76 HOLD THE ERASE BUTTON (IN THE SONG EDITOR SECTIO N) AND POWER ON. ENSONIQ MR-RACK HOLD SAVE AND PRESS ENTER, THEN PRESS ENTER AT T HE PROMPT. ENSONIQ SD-1 HOLD PRESET BUTTON AND PRESS SOFT #1 BUTTON (UPP ER LEFT CORNER OF SCREEN). RELEASE BOTH, PRES S YES AT THE PROMPT. ENSONIQ SQ-1 ( 21 VOICE ) PRESS EDIT/SEQUENCES (PRESETS). PRESS AND HOLD B Page 4
RESETS.TXT ANK 9 (SYSTEM) AND THEN PRESS SCREEN 9. RELEA SE BOTH AND PRESS YES AT THE PROMPT. ENSONIQ SQ-1/32 PRESS EDIT/SEQUENCES (PRESETS). PRESS AND HOLD B ANK 9 (SYSTEM) AND THEN PRESS SCREEN 9. RELEA SE BOTH AND PRESS YES AT THE PROMPT. ENSONIQ SQ-2 ( 21 VOICE ) PRESS EDIT/SEQUENCES (PRESETS). PRESS AND HOLD B ANK 9 (SYSTEM) AND THEN PRESS SCREEN 9. RELEA SE BOTH AND PRESS YES AT THE PROMPT. ENSONIQ SQ-2/32 PRESS EDIT/SEQUENCES (PRESETS). PRESS AND HOLD B ANK 9 (SYSTEM) AND THEN PRESS SCREEN 9. RELEA SE BOTH AND PRESS YES AT THE PROMPT. ENSONIQ SQ-80 HOLD THE RECORD BUTTON AND PRESS THE #1 SOFT BUT TON (UPPER LEFT CORNER OF SCREEN). RELEASE BO TH BUTTONS, PRESS YES AT THE PROMPT. ENSONIQ SQ-R HOLD SYSTEM BUTTON. QUICKLY PRESS "NO" THEN RELE ASE BOTH BUTTONS. PRESS YES AT PROMPT. ENSONIQ TS-10 HOLD PRESETS BUTTON AND PRESS SOFT 1 BUTTON (UPP ER LEFT CORNER OF DISPLAY). RELEASE BOTH BUTT ONS. SELECT YES AT THE PROMPT. ENSONIQ TS-12 HOLD PRESETS BUTTON AND PRESS SOFT 1 BUTTON (UPP ER LEFT CORNER OF DISPLAY). RELEASE BOTH BUTT ONS. SELECT YES AT THE PROMPT. ENSONIQ VFX HOLD PRESETS BUTTON, PRESS SOFT 1 BUTTON (UPPER LEFT CORNER OF SCREEN). SELECT YES AT PROMPT. ENSONIQ VFX/SD HOLD PRESET BUTTON AND PRESS SOFT #1 BUTTON (UPP ER LEFT CORNER OF SCREEN). RELEASE BOTH, PRES S YES AT THE PROMPT. ENSONIQ ZR-76 HOLD THE ERASE BUTTON (IN THE SONG EDITOR SECTIO N) AND POWER ON. KORG 01W HOLD RESET AND COMPARE THEN POWER ON. KORG 01WFD HOLD RESET AND COMPARE THEN POWER ON. KORG A1 HOLD WRITE AND -1 THEN POWER ON. KORG A2 HOLD DOWN ARROW AND UP ARROW, POWER ON, PRESS "E " (YES). Page 5

RESETS.TXT KORG A3 HOLD DOWN ARROW AND UP ARROW, POWER ON, PRESS "E " (YES). KORG A4 HOLD WRITE AND BYPASS, THEN POWER ON. KORG AM8000-R HOLD FX1 AND FX2 THEN POWER ON. KORG C-505 MIDI/TRANSPOSE + SPLIT AND RESTART UNIT. KORG DDD-1 HOLD YES AND NO, THEN POWER ON. KORG DL8000-R HOLD "MS/D" AND "HOLD", THEN POWER ON. KORG DS-8/707 HOLD UP AND DOWN, THEN POWER ON. KORG I1 HOLD PROGRAM AND DISK, THEN POWER ON. KORG I2 HOLD ARR PLAY AND EDIT STYLE THEN POWER ON. KORG I3 HOLD ARR PLAY AND EDIT STYLE THEN POWER ON. KORG I30 HOLD ARRANGE PLAY AND GLOBAL, THEN POWER ON. KORG I4S HOLD ARR. PLAY AND PROGRAM, THEN POWER ON. KORG I5M HOLD ARR. PLAY AND GLOBAL, THEN POWER ON. KORG I5S HOLD ARR. PLAY AND GLOBAL, THEN POWER ON. KORG IH HOLD DETUNE AND BASS, THEN POWER ON. KORG IS40/50/I40M HOLD ARR. PLAY AND GLOBAL, THEN POWER ON. KORG KARMA HOLD ENTER AND 0, THEN POWER ON. KORG M1 HOLD INT, CARD, AND COMBI THEN POWER ON. KORG M1R HOLD INT, PROG, AND COMBI THEN POWER ON. KORG M3R PAGE 5D OF GLOBAL MODE. KORG N264 HOLD ENTER AND 7, THEN POWER ON. Page 6
RESETS.TXT KORG N364 HOLD ENTER AND 7, THEN POWER ON. KORG O5RW HOLD +1 AND -1 THEN POWER ON. KORG SG-PROX HOLD PROGRAM AND PIANO 1, THEN POWER ON. KORG SG-RACK HOLD EDIT AND A4, THEN POWER ON. KORG T SERIES HOLD LOWER KEYPAD 0 AND PROG A, POWER ON, AND TH EN IMMEDIATELY TURN OFF. KORG TR-RACK HOLD EDIT AND A4, THEN POWER ON. KORG TRITON HOLD ENTER AND 0, THEN POWER ON. KORG TRITON RACK HOLD ENTER AND 0, THEN POWER ON. KORG X3 HOLD ENTER AND CURSOR DOWN THEN POWER ON. KORG X3R HOLD ENTER AND CURSOR DOWN THEN POWER ON. KORG X5 HOLD +1 AND -1, THEN POWER ON. KORG X5D HOLD +1 AND -1 THEN POWER ON. KORG X5DR HOLD +1 AND -1 THEN POWER ON. KORG Z1 HOLD SW1 AND SW2, THEN POWER ON. KORG Z1EX HOLD SW1 AND SW2, THEN POWER ON. OBERHEIM MATRIX-6 HOLD STORE WHILE POWERING ON. PEAVEY ADDVERB HOLD THE - AND 5 KEYS THEN POWER ON. PEAVEY ADDVERB II HOLD THE - AND 5 KEYS THEN POWER ON. PEAVEY ADDVERB III HOLD THE ADD/DEL AND GLOBAL BUTTONS, POWER ON. PEAVEY AEQ 2800 HOLD THE MIDI AND ASSIGN KEYS THEN POWER ON. PEAVEY AUTOGRAPH Page 7
RESETS.TXT HOLD THE MIDI AND ASSIGN KEYS THEN POWER ON. PEAVEY BASSFEX HOLD THE PLAY AND GLOBAL BUTTONS THEN POWER ON. PEAVEY CEQ 28 HOLD THE MIDI AND ASSIGN KEYS THEN POWER ON. PEAVEY CEX 4 HOLD THE MASTER AND STORE/MEMORY BUTTONS THEN PO WER ON. PEAVEY CEX 4L HOLD THE MASTER AND STORE/MEMORY BUTTONS THEN PO WER ON. PEAVEY CYBERBASS (MODULE) HOLD THE PROGRAM AND RIGHT CURSOR BUTTONS THEN P OWER ON. PEAVEY DPM 2 HOLD 0 BUTTON, PRESS ENTER. RELEASE BOTH BUTTONS AND PRESS ENTER. PEAVEY DPM 4 HOLD SAVE BUTTON, PRESS PAUSE. PRESS ENTER WHEN PROMPTED. PEAVEY DPM C8 HOLD THE 0 AND ENTER BUTTONS, POWER ON, WAIT FOR THE "UNIT INITIALIZED" DISPLAY THEN RELEASE T HE BUTTONS. PEAVEY DPM C8P HOLD THE 0 AND COPY BUTTONS, POWER ON, WAIT FOR THE "UNIT INITIALIZED" DISPLAY THEN RELEASE T HE BUTTONS. PEAVEY DSR 1000 HOLD THE - AND 5 KEYS THEN POWER ON. PEAVEY LIBRARIAN HOLD LOAD, SAVE, AND UTIL BUTTONS AND POWER ON. PEAVEY MAP 8X4 HOLD BYPASS + POWER WHILE PLUGGING UNIT IN. PEAVEY MFP 2128/MIDI MANA HOLD + AND - KEYS THEN POWER ON. PEAVEY MIDI MANAGER HOLD + AND - KEYS THEN POWER ON. PEAVEY MIDI MASTER HOLD FUNCTION AND PROC A KEYS THEN POWER ON. PEAVEY MIDI MASTER II HOLD FUNCTION AND PROC A KEYS THEN POWER ON. PEAVEY MIDI STREAMER HOLD THE RECORD (SYSX, SAMP, + SEQ) KEYS AND POW ER ON. AT PROMPT PRESS START TO RE-INIT. Page 8

RESETS.TXT PEAVEY MULTIFEX HOLD THE 2 KEYS NEXT TO DISPLAY AND POWER ON. PEAVEY PC 1600 HOLD THE UTILITY + ENTER KEYS AND POWER ON. PEAVEY PC4-X HOLD THE MASTER + MIDI KEYS AND POWER ON. PEAVEY PC4-XL HOLD THE MASTER + MIDI KEYS AND POWER ON. PEAVEY PGP 20 HOLD THE A/B + MUTE KEYS AND POWER ON. PEAVEY PLM 8128 PRESS TWO RIGHT-MOST SOFT KEYS IN BOTTOM ROW AND POWER ON. (VCA CAL UNAFFECTED) PEAVEY PLM 8128E HOLD THE SOLO AND MUTE KEYS, POWER ON. (VCA CAL UNAFFECTED) PEAVEY PROFEX HOLD THE PLAY AND MIDI KEYS THEN POWER ON. PEAVEY PROFEX II HOLD THE PLAY AND GLOBAL BUTTONS, POWER ON. PEAVEY PROGRAMAX HOLD THE A/B AND MUTE KEYS THEN POWER ON. PEAVEY PV LITE 3000 FACTORY PRESETS: HOLD CHASE + AUTO SOUND, POWER ON. HARD RESET: HOLD DOWN + STORE, POWER ON. IN BOTH CASES, HOLD UNTIL 00 APPEARS IN THE DISPLAY. PEAVEY SDR 20/20 HOLD THE PLAY AND STORE KEYS THEN POWER ON. PEAVEY SPECTRUM ANALOG FI HOLD THE DEC AND EXEC BUTTONS, POWER ON. ( TO IN IT. FOR USE W/ CYBERBASS, HOLD DEC AND BYPASS THEN POWER ON. PEAVEY SPECTRUM BASS II HOLD THE + AND - BUTTONS THEN POWER ON. PEAVEY SPECTRUM ORGAN HOLD THE + AND - BUTTONS THEN POWER ON. PEAVEY SPECTRUM SYNTH HOLD THE + AND - BUTTONS THEN POWER ON. PEAVEY ULTRAVERB HOLD THE - AND 5 KEYS THEN POWER ON. PEAVEY ULTRAVERB II HOLD THE + AND 9 BUTTONS THEN POWER ON. ROLAND A-220 HOLD B AND MEMORY THEN POWER ON. Page 9
RESETS.TXT ROLAND A-30 WRITE + POWER ON (15 SECONDS) ROLAND A-33 WRITE + POWER ON (15 SECONDS) ROLAND A-50 HOLD 1ST+3RD+4TH BUTTONS UNDER DISPLAY, PRESS CH ANNEL, THEN PRESS ANY CURSOR KEY. ROLAND A-80 HOLD 1ST+3RD+4TH BUTTONS UNDER DISPLAY, PRESS CH ANNEL, THEN PRESS ANY CURSOR KEY. ROLAND A-880 HOLD SIGNAL AND MEMORY THEN POWER ON. ROLAND A-90 HOLD EDIT, POWER ON THEN PRESS ENTER. WITH VOICE EXPANDER BOARD: HOLD MANUAL, POWER ON, THEN PRESS ENTER. ROLAND no rom reset. ROLAND no rom reset. ROLAND no rom reset. ADA-8024 ALPHA JUNO-1 ALPHA JUNO-2
ROLAND AP-700 PWR ON, EXIT REPEATEDLY TO ANALYZER/FILTER SCREE N. CURSOR TO: MENU + ENTER, SYSTEM + ENTER, I NIT + ENTER. USE VALUE SELECT ALL THEN EXEC + ENTER TWICE. ROLAND no rom reset. AR SERIES
ROLAND AT SERIES ONE TOUCH PROGRAM + POWER ON. ROLAND AX-1 WRITE + POWER ON (30 SECONDS). ROLAND AXIS-1 HOLD FUNCTION; PRESS F#0, C#2, AND D#2 KEYS. ROLAND CA-30 RESETS EVERY TIME TOGGLED OF AND THEN ON. ROLAND no rom reset. CR ( ALL OTHER)
ROLAND CR-80 DEL + REPEAT + POWER ON, THEN PRESS ENTER. ROLAND CSQ SERIES no rom reset. {*} ROLAND D-10 no rom reset. {*} Page 10
RESETS.TXT ROLAND D-110 no rom reset. {*} ROLAND D-20 no rom reset. {*} ROLAND D-5 no rom reset. {*} ROLAND D-50 TUNE/FUNCTION AND MIDI DATA INIT: HOLD 0 AND DAT A TRANSFER, POWER ON. PATCH + REVERB MUST BE LOADED FROM CARD OR SYSEX FILE. ROLAND D-550 TUNE/FUNCTION AND MIDI DATA INIT: HOLD PATCH BAN K 2, PATCH NUMBER6, AND ENTER, POWER ON. PATC H AND REVERD DATA MUST BE LOADED FROM CARD OR SYSEX FILE. ROLAND D-70 no rom reset. {*} ROLAND DDR-30 HOLD #1 BUTTON + POWER ON. ROLAND DEP-3 MEMORY NO UP AND DOWN + POWER ON. ROLAND DEP-5 MEMORY NO UP AND DOWN + POWER ON. ROLAND no rom reset. ROLAND no rom reset. ROLAND no rom reset. DJ-70 DJ-70MKII DM SERIES

ROLAND DR-5 FRET LEFT + FRET RIGHT + POWER ON; 2 X ENTER. ROLAND DR-550 HOLD -1 AND +1 AND POWER ON, THEN PRESS START. ROLAND DR-550MKII HOLD -1 AND +1 AND POWER ON, THEN PRESS START. ROLAND DR-660 UTILITY THEN CURSOR TO SELECT (8) INIT; 2 X ENTE R. ROLAND DS-330 REVERB + SPLIT + PWR ON; PRESS YES. ROLAND E-10 HOLD WRITE + POWER ON. ROLAND no rom reset. ROLAND E-12 E-14US Page 11
RESETS.TXT no rom reset. ROLAND E-14US resets at power on. ROLAND E-15 resets at power on. ROLAND E-16 resets at power on. ROLAND E-20 HOLD WRITE + POWER ON. ROLAND E-28US resets at power on. ROLAND E-30 HOLD WRITE + POWER ON. ROLAND E-35 HOLD REC/PUNCH IN + POWER ON. ROLAND E-36 RECORDER + POWER ON. ROLAND no rom reset. E-5
ROLAND E-56 HOLD WRITE + POWER ON. ROLAND E-66 RECORD (IN DISK RECORDER SECTION) + POWER ON. ROLAND E-68US HOLD WRITE + POWER ON. ROLAND E-70 HOLD WRITE + POWER ON. ROLAND E-86 HOLD WRITE + POWER ON. ROLAND E-96 HOLD WRITE + POWER ON. ROLAND no rom reset. EM-101
ROLAND EM-303 resets at power on. ROLAND EM-305 resets at power on. ROLAND no rom reset. EP (ALL OTHER)
ROLAND EP-3 resets at power on. ROLAND EP-5 Page 12
RESETS.TXT HOLD REC + PLAY, PRESS STRINGS, POWER OFF / ON. ROLAND EP-7 HOLD REC + PLAY, PRESS STRINGS, POWER OFF / ON. ROLAND EP-707 resets at power on. ROLAND EP-7MKII HOLD REC + PLAY, PRESS STRINGS, POWER OFF AND ON. ROLAND EP-9 HOLD REC + PLAY, PRESS CHOIR, POWER OFF AND ON. ROLAND no rom reset. FC-100
ROLAND FC-100MKII HOLD #1 + #2 + #8 AND POWER ON. ROLAND FC-200 HOLD #10 AND POWER ON, THEN PRESS CTL PEDAL. ROLAND FG-10 HOLD CLEAR AND EXIT THEN POWER ON. ROLAND FG-1000 HOLD CLEAR AND EXIT THEN POWER ON. ROLAND FP-1 resets at power on. ROLAND FP-8 PRESS FUNC AND RELEASE HOLD PIANO PRESS FUNC AGA IN. ROLAND G-800 HOLD WRITE, THEN POWER ON. ROLAND no rom reset. GC-8
ROLAND GI-10 HOLD PARAMETER + AND -, POWER ON THEN PRESS VALU E +. ROLAND GM-70 POLY MODE: HOLD PLAY, GENERAL EDIT, + IND EDIT T HEN POWER ON. MONO MODE: HOLD TUNE, CONTROL A SSIGN, AND DATA TRANSFER THEN POWER ON. ROLAND GP-100 HOLD IN PARAMETER KNOB, POWER ON, PRESS WRITE. ROLAND GP-16 HOLD #6, #7, #8, THEN POWER ON. USE FUNCTION LEF T AND RUGHT TO SELECT "2. ALL FACTORY PRESET" THEN PRESS WRITE 3 TIMES. ROLAND no rom reset. GP-8 Page 13
RESETS.TXT ROLAND no rom reset. GR (ALL OTHER)
ROLAND GR-09 HOLD PEDAL #2 THEN POWER ON. PRESS VALUE+ THEN P RESS EDIT/PLAY. ROLAND GR-1 HOLD WRITE/COPY THEN POWER ON THEN PRESS YES. ROLAND GR-30 HOLD PEDAL #2, POWER ON. PRESS PATCH + TO SELECT INIT. PRESS EDIT/PLAY, THEN PATCH + AND - SI MULTANEOUSLY. ROLAND GR-50 no rom reset. {*} ROLAND no rom reset. GS-6

ROLAND GT-5 HOLD MOD + FEED BACKER/SLOW GEAR, POWER ON. THEN PRESS WRITE. ROLAND GX-700 PRESS TUNER/UTILITY. USE PARAMETER LEFT AND RIGH T TO SELECT FACT INIT. CURSOR TO LEFT, DIAL S YSTEM, THEN RIGHT AND DIAL P#100. PRESS WRITE THEN TUNER/UTILITY. ROLAND HP (ALL OTHER) resets at power on. ROLAND no rom reset. ROLAND no rom reset. ROLAND no rom reset. ROLAND no rom reset. HP-100 HP-300 HP-400 HS SERIES
ROLAND JD-800 PRESS DATA TRANSFER. PAGE UP TO SELECT FACTORY P RESET, PRESS YES. ROLAND JD-990 HOLD EXIT AND PRESS UTILITY. PRESS F6 THEN F5. ROLAND no rom reset. ROLAND no rom reset. JP-6 JP-8
ROLAND JP-8000 HOLD SHIFT, PRESS INIT/BULK. PRESS BUTTON 7, USE UP/DOWN (SELECT FACTORY RESET), PRESS WRITE TO SELECT FACTORY PRESET. Page 14
RESETS.TXT ROLAND JS-30 HOLD RECORD BUTTON (SEQUENCER SECTION), POWER ON. ROLAND no rom reset. ROLAND no rom reset. ROLAND no rom reset. ROLAND no rom reset. ROLAND no rom reset. ROLAND no rom reset. ROLAND no rom reset. JUN0-106 JUN0-60 JUNO-1 JUNO-2 JUNO-6 JUPITER-6 JUPITER-8
ROLAND JV-1000 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE. ROLAND JV-1080 PRESS UTILITY. CURSOR DOWN ONCE THEN RIGHT 3 TIM ES TO FACTORY PRESET. PRESS ENTER TWICE, THEN UTILITY. ROLAND JV-2080 PRESS UTILITY. PRESS F6 TWICE TO MENU 3. PRESS F 1 THEN F6. IF REQ'D USE VALUE DIAL TO TURN OF F MEM. PROT. AND PRESS F6 TWICE. ROLAND JV-30 PRESS CHORUS + REVERB (ABOVE INIT) TOGETHER THEN PRESS VALUE UP. ROLAND JV-35 PRESS CONTROL + MASTER TOGETHER. USE PARAMETER U P AND DOWN TO SELECT ALL. PRESS VALUE UP. ROLAND JV-50 PRESS CONTROL + MASTER TOGETHER. USE PARAMETER U P AND DOWN TO SELECT ALL. PRESS VALUE UP. ROLAND JV-80 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE. ROLAND JV-880 PRESS UTILITY, USE DATA DIAL TO SELECT FACTORY P RESET. PRESS ENTER TWICE. ROLAND JV-90 HOLD NUMBER 8, POWER ON. PRESS ENTER THEN WRITE. ROLAND JW-50 PRESS TUNE/FUNCTION. PRESS F5 THEN F4 THEN F3 TH EN F4. Page 15
RESETS.TXT ROLAND JX-1 HOLD WRITE AND FLUTE THEN POWER ON. ROLAND no rom reset. ROLAND no rom reset. ROLAND no rom reset. JX-10 JX-3P JX-8P
ROLAND KR-100 resets at power on. ROLAND KR-3000 HOLD FROM AND TO, THEN PRESS WRITE. ROLAND KR-33 resets at power on. ROLAND KR-350 HOLD LOAD AND SAVE, THEN PRESS WRITE. ROLAND KR-3500 HOLD LOAD AND SAVE, THEN PRESS WRITE. ROLAND KR-370 resets at power on. ROLAND KR-4500 HOLD LOAD AND SAVE, THEN PRESS WRITE. ROLAND KR-4700 HOLD LOAD AND EDIT, THEN PRESS SAVE. ROLAND KR-500 HOLD FROM AND TO, THEN PRESS WRITE. ROLAND KR-5000 HOLD LOAD AND EDIT, THEN PRESS SAVE. ROLAND KR-55 HOLD MIDI FUNCTION AND PRESS CARDS (5 SECONDS). ROLAND KR-5500 HOLD LOAD AND SAVE, THEN PRESS WRITE. ROLAND KR-650 HOLD LOAD AND SAVE, THEN PRESS WRITE. ROLAND LVC-1N HOLD ENTER BUTTON THEN POWER ON. ROLAND M-760 HOLD EDIT, PRESS WRITE. PARAMETER UP/DOWN TO SEL ECT ALL + PRESS WRITE. ON COMPLETION PRESS ED IT TO RETURN TO PLAY. ROLAND M-DC1 HOLD F3 AND THEN POWER ON. Page 16

RESETS.TXT ROLAND M-GS64 HOLD F3 AND THEN POWER ON. ROLAND M-OC1 HOLD F3 AND THEN POWER ON. ROLAND M-SE1 HOLD F3 AND THEN POWER ON. ROLAND M-VS1 HOLD F3 AND THEN POWER ON. ROLAND MBD1 HOLD F3 AND THEN POWER ON. ROLAND no rom reset. MC SERIES; EXC 303
ROLAND MC-303 HOLD SHIFT AND THEN POWER ON, THEN PRESS ENTER. ROLAND ME-10 HOLD BANK DOWN PEDAL, THEN PRESS WRITE. ROLAND ME-5 HOLD PEDALS 1 AND 2, POWER ON; PRESS WRITE IMMED IATELY. ROLAND ME-6 HOLD LEFT + DOWN AND POWER ON; THEN PRESS WRITE. ROLAND ME-6B HOLD LEFT + DOWN AND POWER ON; THEN PRESS WRITE. ROLAND ME-8 HOLD LEFT + DOWN AND POWER ON; PRESS WRITE/COPY. ROLAND ME-8B HOLD PARAMETER LEFT + DOWN BUTTONS, THEN PRESS W RITE/COPY. ROLAND ME-X HOLD PARAMETER LEFT + DOWN AND POWER ON, THEN PR ESS WRITE. ROLAND MK-80 HOLD WRITE, PRESS EDIT. HOLD LEFT AND RIGHT CURS OR BUTTONS AND PRESS UP. ROLAND no rom reset. MKB SERIES
ROLAND MKS-50 POLY MODE: HOLD 4 AND 8 AND POWER ON. MONO MODE: HOLD 3 AND 7 THEN POWER ON. ROLAND no rom reset. ROLAND no rom reset. ROLAND MP SERIES MS-1 MSQ-100 Page 17
RESETS.TXT no rom reset. ROLAND no rom reset. MSQ-700
ROLAND MT-100 HOLD STOP, PRESS DELETE. AFTER THE DISPLAY FLASH ES "ALL CLEAR" PRESS EXECUTE. ROLAND MT-120 HOLD REPEAT, SONG (BLUE), AND PLAY, POWER ON. PR ESS FWD REPEATEDLY UNTIL READS T13. PRESS PLA Y THEN RECORD, THEN POWER OFF/ON. ROLAND MT-120S HOLD REPEAT, SONG (BLUE), AND PLAY, POWER ON. PR ESS FWD REPEATEDLY UNTIL READS T13. PRESS PLA Y THEN RECORD, THEN POWER OFF/ON. ROLAND MT-200 HOLD REPEAT, SONG (BLUE), AND PLAY, POWER ON. US E DIAL TO SELECT T-15 ON DISPLAY. PRESS PLAY THEN RECORD, THEN POWER OFF/ON. ROLAND MT-32 HOLD MASTER VOLUME, PRESS RHYTHM PART, PRESS PAR T 1. ROLAND MT-80 resets at power on. ROLAND no rom reset. MV-30
ROLAND OCTAPAD HOLD MIDI CH AND NOTE NUMBER, POWER ON. POWER OF F, THEN POWER ON AGAIN. ROLAND OCTAPAD II HOLD BOTH VALUE BUTTONS, POWER ON. ROLAND no rom reset. P-330
ROLAND P-55 HOLD BOTH INSTRUMENT BUTTONS, POWER ON, THEN PRE SS PARAM 1. ROLAND PAD-8 HOLD MIDI CH AND NOTE NUMBER, POWER ON. POWER OF F, THEN POWER ON. ROLAND PAD-80 HOLD BOTH VALUE BUTTONS, POWER ON. ROLAND PC-150 HOLD COMMAND (LEFT), POWER ON. ROLAND PC-200 HOLD THE 2 BUTTONS UNDER "STANDARD", POWER ON. ROLAND no rom reset. PIANO PLUS (ALL) Page 18
RESETS.TXT ROLAND no rom reset. ROLAND no rom reset. PLANET-P PLANET-S
ROLAND PMA-5 HOLD VALUE, POWER ON. TOUCH 2 CAL. POINTS TOP RI GHT + BOTTOM LEFT OF DISPLAY W/ TOUCH PEN. DI SPLAYS COMPLETED THEN INITIALIZE, TOUCH EXEC. ROLAND PRO-E HOLD WRITE, POWER ON. ROLAND R-5 HOLD PAGE + SELECT AND POWER ON. PRESS ENTER TWI CE AT PROMPTS. ROLAND R-70 HOLD MIDI + ASSIGN AND POWER ON. PRESS YES TWICE AT PROMPTS. ROLAND R-8M HOLD CURSOR RIGHT AND ENTER, POWER ON. PRESS ENT ER TWICE AT PROMPTS. ROLAND RA-50 HOLD WRITE THEN POWER ON. ROLAND RA-90 HOLD WRITE THEN POWER ON. ROLAND RA-95 HOLD REC, POWER ON. ROLAND RSP-550 POWER ON WHILE HOLDING PROG PAGE UP AND DOWN, TH EN PRESS WRITE. ROLAND SB-55 POWER ON WHILE CLEAR. ROLAND SC-33 HOLD SPLIT AND REVERB WHILE POWERING ON, THEN PR ESS YES. ROLAND SC-50 HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL. ROLAND SC-55 HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL. ROLAND SC-55MKII HOLD BOTH INSTRUMENT BUTTONS AND POWER ON. THEN PRESS ALL. ROLAND TD-8 V CUSTOM PRESS SETUP THEN [F3 (MENU)]. PRESS INC/+, ROTAT E THE VALUE DIAL, OR PRESS CURSOR TO MOVE THE CURSOR TO "RESET". Page 19

RESETS.TXT ROLAND TR-505 HOLD PATTERN GROUP A AND MODE AND POWER ON. ROLAND TR-626 HOLD TRACK #1 AND MODE AND POWER ON. ROLAND TR-707 HOLD TRACK WRITE AND PATTERN 1 AND POWER ON. ROLAND TR-727 HOLD TRACK WRITE AND PATTERN 1 AND POWER ON. ROLAND TR-909 HOLD TRACK #1 AND PATTERN #1 AND POWER ON. ROLAND U-110 HOLD THE EDIT AND PART BUTTONS AND POWER ON. ROLAND VP-70 HOLD MIDI, PLAY, AND VOICE EXP AND POWER ON. YAMAHA 02R HOLD "CURSOR LEFT" AND POWER ON. YAMAHA CLP-100 HOLD KEY "F0" AND POWER ON. YAMAHA CLP-121 HOLD KEY "F0" AND POWER ON. YAMAHA CLP-121S HOLD KEY "F0" AND POWER ON. YAMAHA CLP-122 HOLD KEY "F0" OR KEY "B1" AND POWER ON. YAMAHA CLP-122S HOLD KEY "F0" OR KEY "B1" AND POWER ON. YAMAHA CLP-123 HOLD KEY "F0" OR KEY "B1" AND POWER ON. YAMAHA CLP-124 HOLD KEY "F0" OR KEY "B1" AND POWER ON. YAMAHA CLP-133 HOLD KEY "F0" OR KEY "B1" AND POWER ON. YAMAHA CLP-134 HOLD KEY "F0" OR KEY "B1" AND POWER ON. YAMAHA CLP-152 HOLD KEY "F0" AND POWER ON. YAMAHA CLP-152S HOLD KEY "F0" AND POWER ON. YAMAHA CLP-153 HOLD KEY "F0" OR KEY "B1" AND POWER ON. YAMAHA CLP-153S HOLD KEY "F0" OR KEY "B1" AND POWER ON. Page 20
RESETS.TXT YAMAHA CLP-153SG HOLD KEY "F0" OR KEY "B1" AND POWER ON. YAMAHA CLP-154 HOLD KEY "F0" OR KEY "B1" AND POWER ON. YAMAHA CLP-154F HOLD KEY "F0" OR KEY "B1" AND POWER ON. YAMAHA CLP-154S HOLD KEY "F0" OR KEY "B1" AND POWER ON. YAMAHA CLP-155 HOLD KEY "F0" OR KEY "B1" AND POWER ON. YAMAHA CLP-156 HOLD KEY "F0" OR KEY "B1" AND POWER ON. YAMAHA CLP-157 HOLD KEY "F0" OR KEY "B1" AND POWER ON. YAMAHA CLP-158 HOLD KEY "F0" OR KEY "B1" AND POWER ON. YAMAHA CLP-20 HOLD KEY "F0" AND POWER ON. YAMAHA CLP-250 HOLD KEY "F0" AND POWER ON. YAMAHA CLP-260 HOLD KEY "F0" AND POWER ON. YAMAHA CLP-30 HOLD KEY "B1" AND POWER ON. YAMAHA CLP-311 HOLD KEY "B1" AND POWER ON. YAMAHA CLP-350 HOLD KEY "B1" AND POWER ON. YAMAHA CLP-360 HOLD KEY "F0" AND POWER ON. YAMAHA CLP-411 HOLD KEY "B1" AND POWER ON. YAMAHA CLP-500 HOLD KEY "B1" AND POWER ON. YAMAHA CLP-511 HOLD KEY "B1" AND POWER ON. YAMAHA CLP-550 HOLD KEY "B1" AND POWER ON. YAMAHA CLP-555 HOLD KEY "B1" AND POWER ON. YAMAHA CLP-560 HOLD KEY "B1" AND POWER ON. Page 21

RESETS.TXT YAMAHA CLP-570 HOLD KEY "B1" AND POWER ON. YAMAHA CLP-611 HOLD KEY "B1" AND POWER ON. YAMAHA CLP-705 HOLD KEY "B1" AND POWER ON. YAMAHA CLP-711 HOLD KEY "B1" AND POWER ON. YAMAHA CLP-760 HOLD KEY "B1" AND POWER ON. YAMAHA CLP-811 HOLD KEY "B1" AND POWER ON. YAMAHA CLP-911 HOLD KEY "B1" AND POWER ON. YAMAHA CLW-12 HOLD KEY "B1" AND POWER ON. YAMAHA CLW-14 HOLD KEY "B1" AND POWER ON. YAMAHA CS1X HOLD BUTTONS 7, 8, AND 9, AND POWER ON. YAMAHA CS2X HOLD BUTTONS 7, 8, AND 9, AND POWER ON. YAMAHA CVP-35 HOLD KEY "B1" AND POWER ON. YAMAHA CVP-45 HOLD KEY "B1" AND POWER ON. YAMAHA CVP-49 HOLD KEY "F0" AND POWER ON. YAMAHA CVP-50 HOLD KEY "B1" AND POWER ON. YAMAHA CVP-55 HOLD KEY "B1" AND POWER ON. YAMAHA CVP-59 HOLD KEY "B1" AND POWER ON. YAMAHA CVP-65 HOLD KEY "B1" AND POWER ON. YAMAHA CVP-69 HOLD KEY "B1" AND POWER ON. YAMAHA CVP-69A HOLD KEY "B1" AND POWER ON. YAMAHA CVP-70 HOLD KEY "B1" AND POWER ON. Page 22
RESETS.TXT YAMAHA CVP-75 HOLD KEY "B1" AND POWER ON. YAMAHA CVP-79 HOLD KEY "B1" AND POWER ON. YAMAHA CVP-79A HOLD KEY "B1" AND POWER ON. YAMAHA CVP-83 HOLD KEY "B1" AND POWER ON. YAMAHA CVP-83S HOLD KEY "B1" AND POWER ON. YAMAHA CVP-85 HOLD KEY "B1" AND POWER ON. YAMAHA CVP-85A HOLD KEY "B1" AND POWER ON. YAMAHA CVP-87 HOLD KEY "B1" AND POWER ON. YAMAHA CVP-87A HOLD KEY "B1" AND POWER ON. YAMAHA CVP-89 HOLD KEY "B1" AND POWER ON. YAMAHA CVP-89WH HOLD KEY "B1" AND POWER ON. YAMAHA D5000 PRESS STORE AND POWER THEN PRESS RECALL. YAMAHA DEQ7 HOLD DELAY/LEVEL AND PROTECT ON/OFF, POWER ON. YAMAHA DMP-11 PRESS FADER FLIP, PARAMETER LEFT, POWER ON. YAMAHA DMP-7 PRESS FADER FLIP, PARAMETER LEFT, POWER ON. YAMAHA DMP9-16/8 PRESS MEMORY [RECALL], RETURN [SEL], [UTILITY], THEN POWER ON. YAMAHA FX-500 HOLD COMP AND MOD WHILE POWERING ON. YAMAHA FX-770 HOLD COMP AND PLAY WHILE POWERING ON. YAMAHA GW-10 HOLD CHO WHILE POWERING ON. YAMAHA GW-33 HOLD DOWN/NO AND UP/YES WHILE POWERING ON. YAMAHA MDP-2 Page 23
RESETS.TXT HOLD SHIFT AND POWER ON. YAMAHA MFC-10 HOLD MEMORY, EDIT, AND FC EDIT AND POWER ON. YAMAHA MLP-11 HOLD KEY "B1" AND POWER ON. YAMAHA MLP51 HOLD KEY "F0" AND POWER ON. YAMAHA MU-90 HOLD ENTER AND UTIL, THEN POWER ON. YAMAHA P-100 HOLD KEY "B1" AND POWER ON. YAMAHA P-150 HOLD KEY "B1" AND POWER ON. YAMAHA P-300 HOLD KEY "B1" AND POWER ON. YAMAHA P-500 HOLD KEY "B1" AND POWER ON. YAMAHA PDP-300 HOLD KEY "F0" AND POWER ON. YAMAHA PDP-400 HOLD KEY "B1" AND POWER ON. YAMAHA PDP-500 HOLD KEY "B1" AND POWER ON. YAMAHA PSR-410 HOLD [+] AND [-] AND POWER ON. YAMAHA PSR-420 HOLD [+/YES] AND [-/NO] AND POWER ON. YAMAHA PSR-510 HOLD [+] AND [-] AND POWER ON. YAMAHA PSR-520 HOLD [+/YES] AND [-/NO] AND POWER ON. YAMAHA PSR-6000 UTILITY MODE, RECALL PRESET DATA, SELECT ALL DAT A. YAMAHA PSR-620 HOLD [+/YES] AND [-/NO] AND POWER ON. YAMAHA PSR-6300 HOLD KEY "C6" AND POWER ON. YAMAHA PSR-70 HOLD KEY "C5" AND POWER ON. YAMAHA PSR-9000 HOLD DEMO AND POWER ON. Page 24

RESETS.TXT YAMAHA PSR-A3 HOLD [+/YES] AND [-/NO] AND POWER ON. YAMAHA RX-8 HOLD STOP/CONTINUE, +1/YES, AND -1/NO AND POWER ON. YAMAHA SPX-90 HOLD BALANCE, FOOT TRIGGER AND POWER ON. YAMAHA SPX-90II HOLD BALANCE, FOOT TRIGGER AND POWER ON. YAMAHA TMX HOLD UTILITY AND STORE THEN POWER ON. YAMAHA YDP-200 HOLD KEY "F0" OR KEY "B1", THEN POWER ON. YAMAHA YDP-300 HOLD KEY "F0" OR KEY "B1", THEN POWER ON. YAMAHA YDP-301 HOLD KEY "B1", THEN POWER ON. YAMAHA YDP-88 HOLD KEY "B1", THEN POWER ON. YAMAHA YDP-88II HOLD KEY "B1", THEN POWER ON.
Backups should be performed BEFORE executing factory resets or restoring factory presets data. This information is provided as a courtesy. NO claims are made as to the accuracy of this data.

Page 25

Factory Reset Procedures
Caution: Many of these procedures will erase all memory in the unit. Make sure you have backed up any data you wish to keep before performing these procedures! If a unit is not listed here, it does not have an initialization procedure that is user-executable.
Model A-30/33/37 A-50/80 A-70/90/90EX A-220 A-300PRO A-500PRO A-500S A-800PRO A-880 AD-8 AP-700 AT-Series AX-09 AX-1/7 AXIS-1 AX-Synth
Procedure Power on while holding WRITE. (Hold for 15 seconds) While holding the first, third, and fourth buttons under the display, press CHANNEL. Then press any cursor button Power on while holding down MANUAL, then press ENTER Power on while holding B and MEMORY Hold ACT and <, use the VALUE dial to select FACTORY RESET. Press ENTER twice. Hold ACT and <, use the VALUE dial to select FACTORY RESET. Press ENTER twice. Hold MIDI CH and PGM CHANGE, press the SYSTEM key, Use the VALUE dial to select SY6, press ENTER 3 times. Hold ACT and <, use the VALUE dial to select FACTORY RESET. Press ENTER twice. Power on while holding SIGNAL and MEMORY Power on while holding WRITE. Confirm that F flashes in the display, then release WRITE. Press WRITE again Power on, then press EXIT repeatedly to get ANALYZER/FILTER screen. Cursor to MENU, press ENTER. Cursor to SYSTEM, press ENTER. Cursor to INITIALIZE, press ENTER. Use VALUE to select ALL MEMORY, then press ENTER twice (Make sure disk drive is empty.) Power on while holding ONE TOUCH PROGRAM Power on while holding FAVORITE A, B, and WRITE. Press TONE 5, then press WRITE. Power on while holding WRITE. (Hold for 30 seconds) While holding FUNCTION, press the F#0, C#2, and D#2 keys Power on while holding INC/+, DEC/-, and TONE 7(ORGAN/CLAVI), then press WRITE. Procedure Press UTILITY. Cursor to Initialize. Press ENTER. Cursor to All. Press ENTER twice Power on while holding GUITAR, MIC, and LINE. Press ENTER. Press MENU. Cursor to Factory Reset. Press ENTER three times. Power on while holding INPUT SELECT/GUITAR/BASS, MIC, and LINE. Press ENTER Press UTILITY. Press CURSOR Right to select Initialize. Press ENTER. Press CURSOR Right to select All. Press ENTER twice Press UTILITY. Cursor to Initialize. Press ENTER. Cursor to All. Press ENTER twice Procedure Press MENU. Use the DATA dial to select INITIALIZE. Press ENTER twice. Press MENU. Use the < / > buttons to select Factory Reset. Press ENTER twice. Press UTILITY. Cursor right to INIT. Press ENTER/YES. Use CURSOR buttons to select desired target to be initilaized, (GLOBAL, FX, MIXER, ALL). Press ENTER/YES twice Power on while holding WRITE. Release WRITE then press WRITE again Power on while holding DEL and REPEAT, then press ENTER Procedure With the unit on, Hold WRITE and press SYSTEM. Press ENTER twice Power on while holding the START/STOP button until F shows in the display Power on while holding the MEMORY button until F shows in the display Power on while holding METRONOME MODE and LOOP MODE. Press WRITE Power on while holding MEMORY Power on while holding WRITE. Release, then press WRITE again
Model BR-8/532/1180 BR-600 BR-800 BR-864 BR-900CD/ 1200CD BR-1600CD Model CD-2 CD-2E/2i CDX-1 CE-20 CR-80
Model D-2 DB-30 DB-60 DB-88 DB-90 DD-20
2010 Roland Corporation U.S.

Page 1

DDR-30 DEP-3/5 DJ-70/70MKII DR-3 DR-5 DR-202 DR-550/550MKII DR-660 DR-670 DR-770 DR-880 DS-330
Power on while holding the #1 button Power on while holding MEMORY NO UP (^) and DOWN (v) Power on while holding the UP ARROW button to enter test mode. Press A, press C, press S1. When finished the screen will display IC21 = OK Press EDIT. CURSOR Right to select SYSTEM. Press ENTER. CURSOR Right to select <FACTORY RESET>. Press ENTER twice Power on while holding FRET LEFT (<) and RIGHT (>), then press ENTER twice Power on while holding MUTE and ROLL. Press TAP/ENTER. Cursor to YES in the display. Press TAP/ENTER Power on while holding -1 and +1, then press START Press UTILITY, then use LEFT (<) and RIGHT (>) to select [8] INIT. Press ENTER twice Power on while holding REC and STOP / CONT. Press ENTER twice Press UTILITY, then use LEFT (<) and RIGHT (>) to select [9] F. RST. Press ENTER twice Press EDIT. Press CURSOR Right to select Factory Reset. Press ENTER twice Power on while holding REVERB and SPLIT, then press YES Procedure Press FUNCTION so it is lit. Use the FAMILY </> buttons to select Utility, then use the SELECT </> buttons to select Factory Reset. Press TEMPO >/YES twice Power on while holding WRITE Power on while holding REC/PUNCH IN Power on while holding RECORDER Press MENU. Press UTILITY then press FACTORY RESET. Press EXECUTE. Power on while holding WRITE Power on while holding REC in the DISK RECORDER section Power on while holding WRITE Press UTILITY. Use the buttons under the display that correspond to <<PAGE>> to select FACTORY PRESET. Press EXECUTE, then press OK. When the screen displays RESET COMPLETE, turn the unit off, then on Press FUNCTION and use the PAGE (<) (>) buttons to select Factory Preset. Touch the Execute icon followed by the OK icon on the display screen. Power off then on Power on while holding WRITE Power on while holding USER PROGRAM/WRITE With the unit on, press FUNCTION until RESUME shows in the display. Then press TEMPO+ Power on while holding USER PROGRAM/WRITE Performance Sets need to be loaded from disk to restore factory default settings. Insert the factory ZIP Disk into the drive and power on. Press F5 (Disk), then F1 (Load). Press PAGE ^ / v to select PRF MEM and press UPPER 1(Execute) While holding REC and PLAY, press STRINGS. Power off and then back on While holding REC and PLAY, press CHOIR. Power off and then back on Power on while holding REC Power on holding LIGHT and SELECT. Release, then press LIGHT and SELECT again Power on while holding USER PROGRAM/WRITE Power on while holding USER PROGRAM/WRITE Procedure Hold REVERB and press TRANSPOSE, hold OTHERS and use the +/- buttons to select Fct in the display. Press the Stop/Start button twice. With the unit on, press MENU. Press the UP or DOWN cursor buttons to select FACTORY RESET. Press 8 (EXECUTE) twice Press MENU. Use the CURSOR Up and Down buttons to select Factory Reset, then press F8 [Select] followed by F7 [OK]. Press F7 [OK] when completed.

Model E-09 E-10/20/30 E-35 E-36 E-50/60/80 E-56 E-66 E-68/70/86/96 E-300/500 E-600 EG-101 EM-10 EM-15/25 EM-20/30/50/55 EM-2000 ep-5/7/7MKII ep-9 ep-75/85 EQ-20 EXR-3/5 EXR-40/46OR
Model F-110 Fantom Fantom-G6/7/8

Page 2

Fantom-S/S88 Fantom-Xa Fantom-XR Fantom-X6/7/8 FC-100MKII FC-200 FG-10/1000 FP-2 FP-4 FP-5 FP-7 FP-8 FR-3 FR-5/7
Press MENU. Use the CURSOR Up or Down buttons to select Utility, then press ENTER. Press 3 (Factory Reset) Press 8 (Execute) Press EXIT. Press MENU. Turn the VALUE dial to select Utility and then press ENTER. Press F3. Press F6 Press MENU. Press CURSOR Down to select UTILITY. Press ENTER. Press CURSOR Down to select FACTORY RESET. Press ENTER twice Press MENU. Press the CURSOR DOWN button to select Utility. Press button 3 (Factory Reset). Press Button 8 (Exec). Cycle the power Power on while holding pedals #1, #2, and #8 Power on while holding the #10 pedal, then press the CTL pedal Power on while holding CLEAR and EXIT Power on while holding REVERB until Fct shows in the display Power on while holding FUNCTION Power on while holding PEDAL CONTROL Power on while holding FUNCTION Press FUNC and release. While holding PIANO, press FUNC again Power on while holding SET and ORCHESTRA. Power on while holding MENU/WRITE. Press the DATA/ENTER button Procedure Press MENU. Touch UTILITY, then touch FACTORY RESET. Touch EXECUTE Power on while holding WRITE Performance Sets need to be loaded from disk to restore factory default settings. Insert the factory ZIP Disk into the drive and power on. Press F5 (Disk), then F1 (Load). Press PAGE ^ / v to select PRF MEM and press UPPER 1 (Execute) Power on while holding PARAMETER + and -, then press VALUE + With the power off, set the GUITAR /BASS switch to match the instrument you are using. Power on while holding TUNER(STRING SEL). Press WRITE Poly Mode: Power on while holding PLAY, GENERAL EDIT, and IND EDIT. Mono Mode: Power on while holding TUNE, CONTROL ASSIGN, and DATA TRANSFER Power on while holding the #6, #7, and #8 buttons. Use the FUNCTION LEFT (<) and RIGHT (>) buttons to select 2.All Factory Preset, then press WRITE three times Power on while holding WRITE. Release WRITE, (The MEMORY indicator will flash), then press WRITE again Power on while pressing in the PARAMETER knob, then press WRITE Power on while holding Pedal #2, then press the VALUE + button. Now press EDIT/PLAY Power on while holding WRITE/COPY, then press YES Power on while holding WRITE, then press WRITE again Power on while holding Pedal #2, then press the PATCH+ button to select INI. Press EDIT/PLAY. Then press PATCH+ and PATCH- simultaneously Press SYSTEM. Press PARAMETER (>) right to select FACTORY RESET. Use VALUE to select ALL. Press WRITE twice Power on while holding the CHANNEL SELECT A and B buttons (within the PREAMP/SPEAKER section), then press WRITE Power on while holding MOD and SFX. Press WRITE Power on while holding MOD and FEEDBACKER/SLOW GEAR. Press WRITE Power on while holding the PREAMP ON/OFF and (PREAMP)TYPE/VARIATION buttons. Press WRITE Power on while holding COMP/LIMITER ON/OFF and TYPE VARIATION. Press WRITE Press SYSTEM. CURSOR right to select FACTORY RESET then press ENTER twice. Press FUNCTION. Press SELECT Left or Right to choose Utility. Press ENTER twice Press MENU. Use the CURSOR Up and Down buttons to select Utility then press ENTER. Use the CURSOR buttons to select Factory Reset then press ENTER twice. Power off and on. Press TUNER/UTILITY. Use PARAMETER LEFT (<) and RIGHT (>) buttons to select FACT Page 3

Model G-70 G-600/800 G-1000 GI-10 GI-20 GM-70 GP-16 GP-20 GP-100 GR-09 GR-1 GR-20 GR-30 GR-33 GS-10 GT-3 GT-5 GT-6/8/Pro GT-6B GT-10/10B GW-7 GW-8 GX-700
Model HP-130 HP-557 HPD-10 HPD-15
INIT. Cursor to left and dial SYSTEM, then right and dial P#100. Press WRITE, then TUNER/UTILITY Procedure Power on while holding REC Press GUIDE button until it is NOT lit. Touch PIANO, then touch FUNCTION. Use Page (<) (>) to select the function page. Touch FACTORY RESET. Touch OK While holding SHIFT, press EDIT. Press the V button until you see FACTORY RESET. Press >, then use the +/- buttons to select ALL. Press V, then press 4/OK Press SYSTEM and use the PARAMETER (>) to select FACTORY RESET SYSTEM. Use the VALUE dial to select ALL and press WRITE Procedure Press DATA TRANSFER. Use PAGE UP (^) and DOWN (v) to select FACTORY PRESET. Press YES While holding EXIT, press UTILITY. Press F6 (EXECUTE), then F5 (YES) While holding SHIFT, press INIT/UTIL. Press INIT/UTIL repeatedly to select INITIALIZE WRITE. Use the DOWN/UP buttons to select FACTORY PRESET, then press WRITE Press EDIT. Press INIT/UTIL (Bank 7) repeatedly to select Factory Reset. Press REC then press WRITE Power on while holding RECORD located in the SEQUENCER section Press UTILITY. Use CURSOR buttons to select 16 SYSTEM FACTORY RESET. Press ENTER twice Press MENU. Press PAGE/CURSOR Right to select Factory Reset. Press ENTER twice Press MENU. Use ^/v to select UTILITY then press ENTER. ^/v to select FACTORY RESET then press ENTER twice. Press MENU. Use ^/v to select UTILITY then press ENTER. Press F3 FACTORY then press F6 EXECUTE. Press MENU. Use the VALUE Dial to select 5. Utility then press ENTER. Use the VALUE Dial to select Factory Reset then press ENTER. Press Button 5 [EXEC]. Press MENU. Use the CURSOR buttons to select UTILITY, then press ENTER. Use the CURSOR buttons to select FACTORY RESET, then press ENTER. Press 7 [EXEC] to confirm. Power off then back on when finished. Press CHORUS and REVERB (above INITIALIZE) simultaneously. Press VALUE UP (^) Press CONTROL and MASTER simultaneously. Use PARAMETER UP (^) and DOWN (v) to select ALL. Press VALUE UP (^) Power on while holding NUMBER 8 (also labeled PERFORM 16 and CAPS). Press ENTER and then press WRITE Press UTILITY, then use the DATA dial to select FACTORY PRESET. Press ENTER twice Power on while holding NUMBER 8 (also labeled PERFORM 16 and CAPS). Press ENTER, then press WRITE Press VALUE to select Performance Mode. While holding VOLUME press VALUE. Use the CATEGORY/BANK dial to select Piano (LCD will display Fct). Press VALUE twice Press UTILITY. Cursor down once, then cursor right three times to select FACTORY PRESET. Press ENTER twice, then press UTILITY Press UTILITY. Press F6 twice to select MENU 3. Press F1. Then press F6. If necessary, use the VALUE DIAL to turn Memory Protect OFF and press F6 twice Press TUNE/FUNCTION. Press F5 (FACTORY), then F4 (JW RESET), then F3 (GS RESET), then F4 (YES) Power on while holding WRITE and FLUTE Press UTILITY. Use PAGE </> to select Factory Preset and press ENTER. Use PAGE </> to select ALL and press ENTER twice Procedure Press FUNCTION. Touch [System Setting]. Touch [Facotry Reset]. Touch [Execute Press the One Touch Program PIANO button. Touch FUNCTIONS. Touch FACTORY RESET

Model JD-800 JD-990 JP-8000 JP-8080 JS-30 JS-5 Juno-D Juno-Di Juno-G Juno-Gi Juno-Stage JV-30 JV-35/50 JV-80/90 JV-880 JV-1000 JV-1010 JV-1080 JV-2080 JW-50 JX-1 JX-305

Model KF-90 KR-5/7

Page 4
KR-15/15M KR-55 KR-75 KR-177 KR-277/375 KR-350 KR-377 KR-500 KR-570 KR-575 KR-577/977 KR-650 KR-770 KR-1070 KR-1077 KR-3000 KR-3500/4500 KR-4700/5000 KR-5500
Press the One Touch PIANO button. Touch FUNCTION SETTINGS. Touch FACTORY RESET. Touch EXECUTE. Touch YES Hold MIDI/FUNC and press CARD. Hold both VARIATION buttons for 5 seconds Press UTILITY and use the PAGE <</>> buttons to select Factory Preset. Press EXECUTE, then press OK In the Utility menu screen, press PAGE < (left) or PAGE >(right) to select the FACTORY PRESET page. Press EXECUTE. Press OK Press FUNCTION until it is lit. Use BEAT and TEMPO buttons to display FNC41. Press TRANSPOSE twice While holding LOAD and SAVE, press WRITE Press FUNCTION until it is lit. Use the PAGE left or PAGE right buttons at the bottom of the display until Factory Reset appears. Press FACTORY RESET next to the display. Press EXECUTE at the bottom of the display. Press OK While holding FROM and TO, press WRITE While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons (Composer section) simultaneously. Press PART VOLUME ACCOMP repeatedly to get FACTORY SETUP LOAD in the window. After loading is complete, power off and then back on Press FUNCTION and use the PAGE left or right buttons to select Factory Preset. Touch the Execute icon followed by the OK icon on the display screen. Power off then on Press FUNCTION until it is lit. Touch [Factory Reset]. Touch [Execute]. Touch [OK] While holding LOAD and SAVE, press WRITE While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons (Composer section) simultaneously. Press PART VOLUME ACCOMP repeatedly to get FACTORY SETUP LOAD in the window. After loading is complete, power off and then back on Press UTILITY and use the PAGE <</>> buttons to select Factory Preset. Press EXECUTE, then press OK Press FUNCTION until it is lit. Touch [Factory Reset]. Touch [Execute]. Touch [OK] While holding FROM and TO, press WRITE While holding LOAD and SAVE, press WRITE While holding EDIT, press LOAD and SAVE While holding LOAD and SAVE, press WRITE Procedure Power on while holding ENTER Procedure Power on while holding FINALIZE and ROOM ACOUSTIC While holding EDIT, press WRITE. Use PARAMETER UP (^) and DOWN (v) to select ALL, then press WRITE. When completed, press EDIT to return to Play Mode Set the SELECT switch to the OPTICAL Input setting, then power on while holding the CLOCK SOURCE button Power on while holding F3 Power on while holding F3 Power on while holding F3 Press SETUP. Press INC or DEC until Fct shows in the display. Press ENTER, then press WRITE Power on while holding down SHIFT, then press ENTER With unit on, Press SYSTEM. Press F2 UTIL. Press CURSOR DOWN until Factory Reset appears. Press F1. Press F4 Power on while holding down SHIFT, then press ENTER. Note, this procedure takes several minutes Press SYSTEM, then hold SHIFT and press keyboard pad 16. CURSOR to Factory Rest and press ENTER twice. With the unit on, press MENU. Use CURSOR to select Utility. Press ENTER. Press F4 (Factory Reset.) Press F6 (Execute)

Model LVC-1N Model M-10/16DX M-660/760 M-1000 M-BD1/DC1 M-GS64/OC1 M-SE1/VS1 MC-09 MC-303 MC-307 MC-505 MC-808 MC-909

Page 5

ME-5 ME-6/6B ME-8/8B ME-10 ME-20/20B ME-25 ME-30 ME-33 ME-50/50B ME-70 ME-X MICRO BR MK-80 MKS-50 MMP-2 MT-32 MT-90S MT-100 MT-120/120S MT-200 MT-300S MV-8000/8800
Power on while holding pedals #1 and #2, then press WRITE immediately Power on while holding PARAMETER DOWN (v) and LEFT (<), then press WRITE Power on while holding PARAMETER LEFT (<) and DOWN (v), then press WRITE/COPY Power on while holding the BANK DOWN (v) pedal, then press WRITE In Manual Mode, hold EDIT/EXIT and press PEDAL 2. Press WRITE twice. Hold EXIT and press the MEMORY v (down) pedal. Press WRITE twice. Power on while holding PARAMETER RIGHT (>) and VALUE DOWN (-), then press WRITE/COPY Power on while holding the AMP/EFFECT right button and EZ TONE. Release, then press WRITE and wait for WRITE to stop flashing in the LCD. Power off, then on again Power on while holding WRITE and BANK Left <, then Press WRITE Twice Press Pedals 3 & 4 at the same time to switch to Manual Mode. Hold down EDIT / EXIT and press the MOD pedal. Press WRITE twice. Power on while holding PARAMETER DOWN (v) and LEFT (<), then press WRITE Power on while holding UTILITY. Press YES twice. While holding WRITE, press EDIT. While holding the LEFT (<) and RIGHT (>) cursor buttons, press UP (^) Poly Mode: Power on while holding NUMBER 4 and 8. Mono Mode: Power on while holding NUMBER 3 and 7 With the unit on press SYSTEM until it is orange. Press PAGE until INITIALIZE appears. Use the left VALUE control to select the desired target to be initialized. (SYSTEM, USER PATCHES, ALL). Press ENTER twice While holding MASTER VOLUME, press RHYTHM PART. Press PART 1 With the unit on, Press SONG and [4]. Press <(Bwd) or >(Fwd) until Factory Reset is displayed. Press (+). Press > (PLAY). Turn off the power, then on again While holding STOP, press DELETE. After the display flashes ALL CLEAR, press EXECUTE Power on while holding REPEAT, SONG (blue button), and PLAY. Press FWD repeatedly, until the window reads T-13. Press PLAY, then press REC. Power off, then on Power on while holding REPEAT, SONG (blue button), and PLAY. Use the DIAL to select T-15 in the window. Press PLAY, then press REC. Power off, then on Press MENU and use the VALUE DIAL to select 13:Factory Prset. Press ENTER/TRANSPOSE twice. Power off then on Press SYSTEM, press F5 (SysInfo), press F3 (Initialize), press F5 (Yes). Please note that all factory patches need to be reinstalled via CD-ROM. Procedure Power on while holding both INSTRUMENT buttons, then press PARAM 1 Power on while holding MIDI CH and NOTE NUMBER. Power off, then back on Power on while holding both VALUE (solid < and >) buttons Power on while holding COMMAND on the left edge of the keyboard Power on while holding the two buttons under the word STANDARD Press EDIT. Press the SYSTEM key, then press the # 8 key. SY8 will show in the display. Press ENTER three times Press EDIT. Press the SYSTEM key, then press the # 8 key. SY8 will show in the display. Press ENTER three times Press EDIT. Use the VALUE knob to select SYS, then press ENTER. Use the VALUE knob to select SY16, then press ENTER. Press ENTER twice. Power on while holding OCT/PARAM Power on while holding NUMBER buttons 1 and 2. (This reloads the first BANK of settings) Press UTILITY, then press the RIGHT (>) cursor button repeatedly to select INITIALIZE. Press ENTER, then [EXEC] Press MENU. Use the ^/v buttons to select Utility then press ENTER. Use the Cursor buttons to select Factory Reset then press ENTER. Power on while holding WRITE With the unit off, turn the TYPE knob to VO-WAH. Power on while holding

Model P-55 Pad-8 Pad-80 PC-150 PC-200/200MKII PCR-30/50/80 PCR-M30/50/80 PCR-300/500/800 PK-5 PM-16 PMA-5 Prelude Pro-E PW-10

Page 6

Model R-09/HR R-5/8/8MKII R-8M R-70 RA-50/90 RA-95 RA-800 RC-50 RD-150 RD-170 RD-300GX RD-300SX RD-500 RD-600 RD-700/GX/SX RM-2 RMP-3/5 RS-5/9 RS-50/70 RSP-550 RSS-10 RV-70
MANUAL/MEMORY. (ON/OFF will blink three times, then the MEMORY indicator blinks). Release MANUAL/MEMORY, then press MANUAL/MEMORY again Procedure Press MENU. Use the ^/v buttons to select FACTORY RESET. Press REC twice. Power on while holding CURSOR PAGE and PARAM SELECT, then press ENTER twice Power on while holding ENTER and the RIGHT (>) CURSOR button, then press ENTER twice Power on while holding MIDI and ASSIGN, then press YES twice Power on while holding WRITE Power on while holding REC (WARNING: This will erase the original factory Performance settings. However, you can save them to disk before doing this procedure.) Power on while holding WRITE Power on while holding PLAY MODE and LOOP SYNC. Press ENTER. Power on while holding REC and PLAY Power on while holding WRITE Press EDIT. Use INC/DEC to select Utility, then press ENTER. Use INC/DEC to select Factory Reset, then press ENTER twice. Press EDIT. Use INC/DEC to select UtL, then press ORGAN. Press ENTER twice. Power on while holding NUMBER 1 and 8. Press DEC/YES Press EDIT. Press the RIGHT PAGE button until Initialize All is displayed. Press INC/YES twice. Press EDIT to return to Play mode Press EDIT. CURSOR down to 9 UTILITY and press ENTER. CURSOR down to Factory Reset All and press ENTER three times Power on while holding VALUE UP, SELECT and METRONOME. When rSt flashes in the display, press METRONOME again Power on while holding STOP/START. Press and hold STOP/START until reset is completed. With the unit on, press UTILITY. Use VALUE + / - to select Factory Reset. Press ENTER. Use VALUE + / - to select All. Press ENTER twice Press PATCH so it is lit. Press UTILITY so it is lit. Use PAGE/CURSOR Left or Right to select Ag5: FACTORY RESET. Press ENTER twice Power on while holding PROGRAM/PAGE UP (^) and DOWN (v), then press WRITE Power on while holding LOCK and OPTION. (The MCR-8 LED lights.) Press DEMO PROGRAM four times. Press DEVICE ID Power on while holding WRITE and DOWN. Use the UP (^) and DOWN (v) buttons to select AL. Press WRITE. Power off, then back on Procedure Power on while holding CLEAR Power on while holding REVERB and SPLIT, then press YES Power on while holding both INSTRUMENT buttons, then press ALL While holding SELECT, press both INSTRUMENT buttons. Press ALL Power on while holding both INSTRUMENT buttons, then press ALL Press UTILITY. CURSOR UP and use the VALUE DIAL to select Factory Preset. CURSOR DOWN and use the VALUE DIAL to select ALL. Press ENTER twice Power on while holding CLEAR, then press REC Power on while holding SYSTEM and PROGRAM. Use the DATA dial to select SYSTEM + PROGRAM. Press MEMORY Power on while holding SYSTEM and PROGRAM. Use the DATA dial to select SYSTEM + PROGRAM. Press MEMORY Power on while holding PARAM UP (^) and VALUE UP (^). Press WRITE. Wait three seconds and press WRITE again Power on while holding in the NUMBER/VALUE knob. Press PARAMETER LEFT (<), then dial to STANDARD mode or GUITAR mode. Press WRITE Power on while holding PRESET PATCH and USER PATCH (keep holding until TAP TEMPO Page 7

Model SB-55 SC-33 SC-50/55/MKII SC-88 SC-155 SC-880 SD-35 SDE-330 SDX-330 SE-50 SE-70 SH-01
SH-32 SH-201 Sonic Cell SP-202 SP-303 SP-404 SP-505 SP-606 SP-808 SPD-S SPD-6 SPD-8 SPD-11/20 SPD-30 SRV-330 SRV-2000 SRV-3030/D SX-700
goes out). Press WRITE. Power on while holding 1/A. Press the VALUE UP/DOWN buttons to select the desired target to be initialized. Press WRITE/EXEC twice Power on while holding PRESET and USER. Press WRITE. Press MENU, then select UTILITY. Select FACTORY RESET, then select OK and press CURSOR/VALUE. CAUTION: This procedure will erase all of the internal samples and initialize the unit: Hold down CANCEL and press DEL, then press the A/B button. Press DEL Power on while holding CANCEL, REMAIN, DEL. Press REC Power on while holding CANCEL, REMAIN, and DEL. When ini shows in the display, press REC Press SONG or PTN to display the Play screen. Press SYSTEM to display the system screen. Press F1 (UTILITY). Press F3 (INIT). Set desired target to be initialized with VALUE dial.(ALL, SYSTEM, SAMPLE, SEQ). Press F1 twice Caution: Initializing the unit permanently deletes all samples out of the internal memory. Press MENU. Press CURSOR to select SYSTEM and then press ENTER. Press F3 twice Press SYSTEM/DISK and CURSOR to 4.Init SystemParam?. Press ENTER Press SETUP. Press PAGE Right to select INIT/DELETE. Press ENTER. Use + or to select ALL. Press ENTER Power on while holding DRUMS/U1, PERC/U2, SFX/U3 and OTHERS/U4. Press OTHERS/U4 to execute the reset Power on while holding EDIT, then press COPY. Use the VALUE UP (^) and DOWN (v) to select F A L in the window. Press ALL/ENTER Power on while holding ALL/ENTER and the DOWN ARROW button. Press ALL/ENTER Press MENU. Use Knob 1 to select SYSTEM then press Button 3 [ENTER]. Press Button 2 to select the F.RESET tab. Use Knob 1 to select Factory Reset then press Button 3 [ENTER]. Power on while holding SYSTEM and PROGRAM. Use the DATA dial to select SYSTEM + PROGRAM. Press MEMORY Factory: Power on while holding WRITE and REVERB NON-LINEAR. Delay Mode: Power on while holding WRITE, REVERB NON-LINEAR and ROOM SIMULATE With the unit on, press MEMORY. Use NUMBER/ENTER dial to select FACTORY RESET. Press NUMBER/ENTER twice Press UTILITY. Use PARAMETER LEFT (<) and RIGHT (>) to select FACT INIT. Press WRITE Procedure Power on while holding the + and buttons. Release them, and then press DRUM KIT Press MENU. Use the ^/v buttons to select 9 OPTIONS then press OK. Use the ^/v buttons to select Factory Reset then press OK. Use the Dial to select All then press the SEL [v] button. Press OK. Power on while holding EDIT and START/STOP, then press START/STOP again Power on while holding SHIFT and EDIT SETUP. Press INC/+ to select ALL. Press ENTER twice Press SYSTEM. Use the LEFT (<) and RIGHT (>) CURSOR buttons to select INI, then press ENTER. Cursor to HI HAT and use the DATA dial to select ALL. Press ENTER twice Power on while holding SYSTEM and JUMP, then press ENTER Press SETUP, then F3 MENU. Rotate VALUE to select RESET. Press F3 and use VALUE to select ALL. Press F3 EXEC to execute Press SETUP, then press F3 four times. Press SETUP, then press F4 four times Press SETUP, then press F5 three times Press SETUP. Press F5 twice Power on while holding TRIGGER SELECT and EDIT, release both then press EDIT again Power on while holding MODE and PATTERN GROUP KEY A Power on while holding MODE and TRACK #1 Power on while holding TRACK WRITE and TRACK #1 Page 8

Model TD-3 TD-4 TD-5 TD-6/V TD-7 TD-7T TD-8 TD-9 TD-10 TD-12 TD-20/20X TMC-6 TR-505 TR-626 TR-707/727

TR-909

Power on while holding TRACK #1 and PATTERN #1 Procedure Power on while holding PART and EDIT Procedure Press FUNCTION/MENU. Touch [Global Parameter]. Touch [ALL] Power on while holding MELODY/INTELL, CONTROLLERS and EFFECTS With the unit on, press the FUNCTION/MENU button. Press GLOBAL PARAMETER on the touch screen. Then press ALL on the touch screen Power on while holding PAGE left and PAGE right. Press WRITE Press [SYSTEM]. Press Page [>] to display Page 3. Press F2 [F.RST]. Select ALL , then press F6 [EXEC]. Press WRITE. With the unit on press UTILITY. Use NUMBER/VALUE dial to select Factory Reset. Press NUMBER/VALUE three times Power on while holding F1, F3, and F5. Press F6 for All, F4 for Patches, or F2 for System Power on while holding PAGE (>) and PAGE (<). Press WRITE twice Press SYSTEM. Press PAGE (>) to display page 3. Press F1 F.RST. Press F6 EXEC then press WRITE. Power on while holding WRITE. Release WRITE, then press WRITE again Power on while holding MAIN, SUB and PEDAL in the HARMONIC BAR PART section Power on while holding the UPPER, LOWER, and PEDAL buttons in the HARMONIC BAR PART section. Release and re- press the UPPER, LOWER, and PEDAL buttons once again With the unit on, confirm that the VOLUME is at the MIN position, then power off. Power on while holding BAND, WRITE, and H-BAR MANUAL Press EDIT. Use the RIGHT/LEFT ARROW buttons to select UTILITY and press ENTER. Use the UP/DOWN ARROW buttons to select Factory Reset. Press WRITE, then press ENTER Power one while holding BANK, WRITE, and H-BAR MANUAL. Continue holding BANK, WRITE, and H-BAR MANUAL until all panel indicators light. Press WRITE, then press F3 to access the INIT MENU screen. Press F4 to access the COLD BOOT screen, then press ENTER Press SYSTEM, then press F1-F4 ON/OFF. Use the VALUE dial to put a check in the ALL box and press ENTER three times Power on while holding PROJECT/SYS and F1. Continue to press F1 until completed Press FUNCTION so it is lit. Press F4 [UTILITY]. Use the VALUE dial to select 9. Initialize then press ENTER. Use the VALUE dial to select 2. Factory Reset All then press ENTER. Press F4 [Execute] then press F4 [OK]. Power on while holding BYPASS and FEMALE CHOIR. Power on while holding PLAY, VOICE EXPANSION, and MIDI Press MENU. Cursor to Factory Reset then press F2 [ENTER]. Press F1 [OK]. With the unit on, press UTILITY until it is lit. If the UTILITY Menu1 screen is displayed, press PART/ >. (the UTILITY Menu2 screen will appear). Press F1 (FACTORY). Press F6(EXEC) Press FUNCTION/ENTER. Use the +/- buttons to display Utl. Press STRINGS, then press FUNCTION/ENTER twice. With the unit on, Press MODE. Touch FACORY RESET, then touch EXECUTE Press UTILITY. Touch FACTORY RESET, then touch EXECUTE. Press MODE. Touch SYSTEM. Touch INIT. Touch EXECUTE. Hold shift and press F5/. Page to INIT. Press F1. Press ENTER/YES Hold SHIFT and press F4 (Utility). Press PAGE to get to page 3. Press F1 (PrmIni). Press F5. Press ENTER/YES Hold SHIFT and press F4 (Utility). Press PAGE to get to page 3. Press F6 (PrmIni). Press F5. Press ENTER/YES Press UTILITY. Press PAGE to get to page 3. Press F6 (PrmIni). Press F5. Press Page 9

Model U-110

Model VA-3 VA-5/7 VA-76 V-BASS VB-99 VF-1 VG-8/8EX VG-88 VG-99 VGA-5/7 VK-7 VK-8 VK-8M VK-77 VK-88 VK-1000 VM-3100/Pro VM/C-7100/7200 V-Piano VP-7 VP-70 VP-770 VP-9000 VR-700 V-Synth V-Synth GT V-SynthXT VS-1880/1824CD VS-2000CD VS-2400CD VS-2480
ENTER/YES Power on while holding down the PRESET/USER button Procedure Press CONTROL and MASTER simultaneously. Use PARAMETER UP (^) and DOWN (v) to select ALL. Press VALUE UP (^) Procedure Press UTILITY. Use VALUE + and - to select INITIALIZE, then press ENTER. Use VALUE + and - to select FACTORY PRESET, then press ENTER Press UTIL/CARD and use the CURSOR buttons to select 4:FACTORY RESET. Press ENTER three times. If Write Protect is on, press DEC once, then press ENTER three times Press DISK/UTILITY, select SOUND, select PRESET, then press ENTER. Use the dial to turn Memory Protect OFF if necessary, then press ENTER twice Press UTILITY, press F6 (MENU) twice to select Factory, then ENTER. Press F6 (EXECUTE). Use the dial to turn Memory Protect OFF if necessary, press ENTER, then press F6 (EXECUTE) With the unit on, press UTILITY. Cursor down to Utility Menu 2. Cursor right 3 times to select FACTORY RESET. Press ENTER twice. If Internal Write Protect is set to ON, turn the VALUE dial to select OFF, then press ENTER 3 times While holding down VOLUME, press VALUE. Release them, then turn CATEGORY/BANK to select PIANO. Rotate VALUE until Fct shows in the display. Press VALUE Twice With unit on, press UTILITY. Press UP or DOWN cursor buttons to select the UTIL 2 page. Use LEFT or RIGHT cursor buttons to select FACTORY RESET. Press ENTER twice With the unit on, press UTILITY. Press CURSOR left until FACTORY RESET shows in the display. Press ENTER twice. If WRITE PROTECT ON is displayed, turn the VALUE dial to select OFF, then press ENTER twice With the unit on, press SYSTEM/UTILITY. Press F6 [MENU] to select menu 3. Press F1[FACTORY], then press F6 [FACTORY]. If INT WRITE PROTECT=ON is displayed, press DEC, then press F6 twice

Model W-50

Model XP-10 XP-30 XP-50 XP-60/80 XV-88 XV-2020 XV-3080 XV-5050 XV-5080

Page 10