RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET
RYOBI 10 in. (254 mm) TABLE SAW MODEL NUMBER BTS15

FIGURE A

The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your TABLE SAW or when ordering repair parts.

PARTS LIST FOR FIGURE A

Key No. Part Number A32503006000 AA608506000 A35010651010 A37110650000 A608513000 A08003060220 A608512000 A42001040300 A608501000 AA07153141146 A37130611065 A608508000 A36030612157 A07003060257 A31503006000 A42001050220 608A04010

Description

PUSH NUT.... 2 RIVET (6 X 8).... 2 HANDS-OFF LABEL... 1 WARNING LABEL... 1 BLADE GUARD... 1 HEX HEAD SCREW (1/4 in. X 1-1/2 in.).. 1 SPACER A.... 2 CUSHION PAD.... 1 FLAT WASHER.... 1 STAR WASHER (6.5)... 1 HEX NUT (1/4 in.)... 1 BRACKET... 1 TORQUE SPRING... 1 PHILIPS SCREW (M6 X 22 mm)... 1 FLAT WASHER.... 2 PAWL... 2 SPACER (SMALL)... 2 SPING PIN (4 X 30 mm)... 1 HEX NUT (M6)... 1 BLOCK.... 2 SPLITTER... 1 FIXING SCREW (M6 X 8 mm).. 1 SPLITTER MOUNTING BLOCK... 1 HEX SOCKET SCREW (1/4 in. X 1-1/4 in.).. 1 STAR WASHER (M6)... 1 FLAT WASHER.... 1 MOUNTING BRACKET.... 1 CARRIAGE SCREW (M6 X 18 mm)... 2 LOCK WASHER (M6)... 2 HEX SOCKET SCREW (M6 X 25 mm).. 2 HEX WASHER NUT (M6)... 2 SPRING PIN (5 X 22)... 1 BLADE GUARD ASSEMBLY
* Standard Hardware Item May Be Purchased Locally 3

FIGURE B

SEE NOTE
NOTE: The assembly shown represents an important part of the double insulated system. To avoid the possibility of alteration or damage to the system, service should be performed by your nearest Ryobi Authorized Service Center. For the service center nearest you call 1-800-525-2579. 4

PARTS LIST FOR FIGURE B

Key No. 15 Part Number 588007300 A95001050060 A18003050054 A644307000 9150A02000 A9053D01000 AA50006080049 Description Qty. 1 Key No. 30 Part Number AAA50060030040 AA608310000 608A03040 Description Qty. 1
BRUSH CAP.. CARBON BRUSH.. BRUSH HOLDER.. FIXING SCREW (M5 X 6 mm).. FIXING SCREW (M5 X 5 mm).. PHILLIP SCREW (M5 X 25 mm). MOTOR HOUSING.. RUBBER BAR.. FIELD ASSEMBLY.. SCREW (M5 X 60 mm).. FAN CASING.. ARMATURE.. O-RING (S32)... GEAR BOX.. BALL BEARING (608)..
RETAINING RING (S-15).. OUTPUT GEAR.. KEY.. ARBOR.. BALL BEARING (6003).. * O-RING (G35).. SPACER.. BEARING HOLDER.. BEARING COVER.. * SCREW (M4 X 25 mm).. INNER BLADE FLANGE.. BLADE... BLADE SPACER (SMALL).. OUTER BLADE FLANGE.. ARBOR ASSEMBLY.
WARNING: Improper repair of a double insulated tool can result in damage to the double insulation system possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call 1-800-525-2579. * Standard Hardware Item May Be Purchased Locally 5
RYOBI 10 in. (254 mm) TABLE SAW MODEL NUMBER BTS15 FIGURE C

PARTS LIST FOR FIGURE C

Key No. Part Number 608621000 AA01053560830 A608619000 A31703005005 ADescription Qty. Key No. 31 Part Number A35030451010 A608407000 A608427000 A36030508123 A07003050104 608A05020 608A05030 Description Qty. 4 1
END CAP.. MITER INDICATOR.. MITER FENCE.. MITER FENCE LABEL.. KNOB (5/16 in.).. FLAT WASHER.. MITER FENCE HOLDER.. * HEX HEAD SCREW (5/16 in. X 83 mm). * SELF-TAPPING SCREW (M4 X 8 mm). MITER TABLE SCALE (LARGE).. PIVOT.. LOCK NUT (M5).. * STAR WASHER (M5).. MITER TABLE.. UPPER SLIDER.. LOWER SLIDER..

ECCENTRIC SCREW (M5).. LOCK KNOB... KNOB SCREW.. * NON-ECCENTRIC SCREW (M5). FLAT WASHER.. LOCK NUT (#8-32).. QUICK STOP SCREW (#8-32). QUICK STOP... MITER TABLE SCALE (SMALL).. HEDGE.. * SCREW (M4 X 6 mm).. MITER TABLE BASE..
BUSHING... 2 * SPRING WASHER (M5). 2 * HEX SOCKET SCREW (M5 X 10 mm). 2 MITER FENCE ASSEMBLY SLIDING MITER TABLE ASSEMBLY
* STANDARD HARDWARE ITEM MAY BE PURCHASED LOCALLY 7
RYOBI 10 in. (254 mm) TABLE SAW MODEL NUMBER BTS15 FIGURE D

PARTS LIST FOR FIGURE D

Key No. Part Number A35030401018 A01003040100 A608418000 A35030616105 A36030612157 A13003060120 AA01053560150 A35030818152 Description Qty. Key No. Part Number AADescription Qty. 1 1

* * * *

PAN.. 1 REAR RAIL.. 1 SPRING WASHER.. 2 HEX HEAD SCREW (M4 X 10 mm). 2 SCREW (M5 X 10 mm).. 2 OUTFEED ROD.. 2 REAR OUTFEED... 1 FLAT WASHER.. 2 SPRING WASHER (M6).. 10 SCREW (M6 X 12 mm). 10 SCREW (M4 X 5 mm).. 2 EXTENSION TABLE.. 1 HEX HEAD SCREW (5/16 in. X 15 mm). 3 FLAT WASHER.. 3
MITER TABLE SCREW (5/16 in.). CHANNEL... EXTENSION SUPPORT. RIGHT HANDLE.. * HEX SOCKET SCREW (M6 X 12 mm). RIGHT RAIL CAP.. * HEX SOCKET SCREW (M3 X 6 mm). FRONT RAIL.. LEFT RAIL CAP.. SCALE... KNOB (M6 X 42 mm).. LEFT HANDLE.. MAIN TABLE.. TABLE INSERT..
* Standard Hardware Item May Be Purchased Locally 9
RYOBI 10 in. (254 mm) TABLE SAW MODEL NUMBER BTS15 FIGURE E

PARTS LIST FOR FIGURE E

Key No. 17 Part Number A35018518150 A608710000 AA13053140486 A35030651301 A30053014008 Description Qty.
TABLE LEG.... 3 UPPER TABLE BRACE (LONG).... 2 LOWER TABLE BRACE (LONG)... 1 UPPER TABLE BRACE (SHORT)... 2 LOWER TABLE BRACE (SHORT)... 2 L-SHAPED FOOT PAD... 3 FLAT WASHER.... 2 HEX NUT (5/16 in.)... 2 FOOT PAD... 1 TABLE LEG.... 1 LOWER TABLE BRACE.... 1 CARRIAGE SCREW (5/16 in. X 3/4 in.)... 24 HEX WASHER HEAD SCREW NUT (5/16 in.).. 24 HANGER.... 2 SCREW (1/4 in. X 1/2 in.)... 2 FLAT WASHER.... 2 HEX NUT (1/4 in. X 20)... 2
* Standard Hardware Item May Be Purchased Locally 11
RYOBI 10 in. (254 mm) TABLE SAW MODEL NUMBER BTS15 FIGURE F

PARTS LIST FOR FIGURE F

Key No. Part Number AAE608104000 E07000846157 AA70003040180 A628305000 A35010616105 AA35038518150 ADescription Qty.
KNOB.... 1 WRENCH.... 1 WRENCH.... 1 BLADE STORAGE BUSHING... 1 FLAT WASHER.... 1 BASE.... 1 TAPPING SCREW (M4 X 15 mm)... 6 CORD STORAGE CLEATS... 2 STRAIN RELIEF.... 1 POWER CORD.... 2 MOTOR LABEL.... 1 EXTENSION TABLE HANGER... 2 BASE FOOT PAD... 4 CORD CLAMP.... 2 SELF-TAPPING SCREW (M4 X 10 mm)... 2 SWITCH BOX.... 1 TAPPING SCREW (M4 X 18 mm)... 4 HEX WASHER HEAD SCREW (M6 X 20 mm)... 4 SWITCH ASSEMBLY... 1 SWITCH KEY.... 2 FLAT WASHER.... 4 HEX WASHER HEAD SCREW NUT (5/16 in.).. 4 CABINET WARNING LABEL.... 1 FLAT WASHER.... 4 HEX HEAD SCREW (5/16 in. X 2 in.)... 4 CARRIAGE SCREW (5/16 in. X 1-1/2 in.)... 1

* Standard Hardware Item May Be Purchased Locally 13
RYOBI 10 in. (254 mm) TABLE SAW MODEL NUMBER BTS15 FIGURE G

PARTS LIST FOR FIGURE G

Key No. Part Number 608124000 AAAA35030613010 A07003060150 A10003050100 AA42001040280 AA10003040107 AADescription Qty.
DUST FOAM.... 1 PANEL SUPPORT.... 1 WASHER.... 1 HEX HEAD BOLT (M6 X 15 mm)... 2 BLOCK..... 1 HEX WASHER HEAD SCREW (M6 X 10 mm)... 1 ANGLING PAD.... 2 SUPPORT RACK... 1 DUST FOAM.... 2 LOCK NUT... 2 DUST FOAM.... 1 FLAT WASHER.... 4 HEX SOCKET SCREW (M6 X 15 mm).. 3 SCREW (M5 X 10 mm)... 2 HEX SOCKET SCREW (M6 X 10 mm).. 1 FRONT PANEL STICKER.... 1 BEVEL LOCKER PAD... 1 BEVEL LOCKER.... 1 SPRING PIN (4 X 28 mm)... 1 SCREW (M4 X 6 mm).... 3 WEAR DISC.... 6 SCREW (M4 X 10 mm)... 1 FLAT WASHER.... 1 BEVEL INDICATOR.... 1 HEX SOCKET SCREW (M6 X 10 mm).. 2 FRONT PANEL.... 1
* Standard Hardware Item May Be Purchased Locally 15
RYOBI 10 in. (254 mm) TABLE SAW MODEL NUMBER BTS15 FIGURE H

PARTS LIST FOR FIGURE H

Key No. 19 Part Number A608210000 A36030612157 A608209000 A36030508123 A10003050083 E07050613002 A01003060820 AA09001060150 A30003006003 ADescription Qty. 1 Key No. 38 Part Number 608215000 A31503006000 A608219000 AA609202000 A42001040100 A07003060150 A36030612157 A37130510060 A10003050180 Description Qty. 2
* FIXING SCREW (M5 X 6 mm).. ROCKING ROD BASE.. ROCKING ROD.. * SPRING WASHER (M6). * HEX SOCKET SCREW (M6 X 15 mm). DRIVER SPRING (L). RAISE BASE.. DRIVER SPRING (R). STRAIN RELIEF BRACKET. * SPRING WASHER (M5). * SCREW (M5 X 8 mm).. STRAIN RELIEF.. * HEX HEAD SCREW (M6 X 82 mm). SPRING PIN (8 X 90 mm).. SPACER (9.5 X 69 mm). * HEX HEAD BOLT (M6 X 15 mm).. * HEX NUT (M6).. LOCK NUT.. BEVEL LOCK PILLAR..
BEVEL LOCK SHAFT.. BUSHING... BEVEL LOCK SPRING.. HEX WASHER HEAD NUT (M6). HEX HEAD BOLT (M4 X 13 mm). SPACER (9.5 X 84 mm). INDICATOR SUPPORT.. HEX HEAD BOLT (M6 X 100 mm). BEVEL STOPPER (14 X 34 mm). HEX HEAD BOLT (M5 X 10 mm). BEVEL CASE... RAISE SUPPORT.. PIVOT BASE.. BLOCK.. SPRING PIN (4 X 10 mm).. HEX SOCKET SCREW (M6 X 15 mm). SPRING WASHER (M6). STAR WASHER (M5).. SCREW (M5 X 18 mm)..

* Standard Hardware Item May Be Purchased Locally 17
RYOBI 10 in. (254 mm) TABLE SAW MODEL NUMBER BTS15 FIGURE I

PARTS LIST FOR FIGURE I

Key No. 19 Part Number A46000080005 AAA608204000 A35030410018 A10003040106 A31703006004 AS60800100 983000-290 983000-290R 2-13-04 Description Qty.
C-RING..... 2 FLAT WASHER.... 1 REAR BUSHING.... 1 FLAT WASHER.... 1 DRIVER.... 1 * HEX NUT (M10 X 4T)... 2 DRIVE BOLT (M10)... 1 FRONT BUSHING.... 1 SPRING.... 1 SPRING COVER.... 1 MITER HAND WHEEL... 1 HAND WHEEL.... 1 FLAT WASHER.... 1 * HEX SOCKET SCREW (M4 X 10 mm).. 1 LOCK NUT (M6).... 1 FLAT WASHER.... 1 HANDLE (SHORT).... 1 * BOLT (M6 X 52 mm).... 1 HANDLE CAP.... 1 HANDWHEEL ASSEMBLY OPERATOR'S MANUAL REPAIR SHEET
* Standard Hardware Item May Be Purchased Locally 19
RYOBI 10 in. (254 mm) TABLE SAW MODEL NUMBER BTS15 FIGURE J

PARTS LIST FOR FIGURE J

Key No. Part Number A608613000 A608604000 AA608606000 A10003040100 A608607000 A35030410018 A35036516010 A04053140150 608A05040 Description Qty.
REAR FENCE CAP... 1 FIXING SPRING.... 1 SCREW (M5 X 25 mm)... 1 REAR CLAMP... 1 COMPRESSION SPRING (17 X 45 mm)... 1 SPRING PIN (3.2 X 20 mm)... 1 ROD.... 1 PIN (4 X 33.5 mm).... 1 CLAMP PIN (6 X 33.5 mm)... 1 FENCE.... 1 FENCE BLOCK.... 1 FENCE CLAMP.... 1 BUSHING (22 X 14.5 mm)... 1 CAM (22 X 22 mm)... 1 SET SCREW (M4 X 6 mm)... 1 HANDLE.... 1 SELF-TAPPING SCREW (M4 X 6 mm).. 1 CAM BRACKET.... 1 SHAFT.... 1 SCREW (M4 X 10 mm)... 3 STAR WASHER (M4)... 2 PLASTIC PAD.... 2 FENCE INDICATOR.... 1 FLAT WASHER.... 1 FLAT WASHER.... 2 HEX SOCKET SCREW (1/4 in. X 15 mm)... 2 RIP FENCE ASSEMBLY
* Standard Hardware Item May Be Purchased Locally 21

NO MINIMUMS - NO RESERVES

James G. Murphy Inc.

PUBLIC AUCTION

Closing Company

Commercial & Industrial Auctioneers

Stearns

Construction, LLC
17256 NE Sacramento St Portland, OR 97230

November 17, 2010

Commercial & Industrial Auctioneers PO Box 82160 Kenmore, WA 98028
Shop Equipment & Tools, Rolling Stock

Wednesday

Auction Starts at 10:00 am
Preview 8 - 10am, Wednesday, Nov. 17
FIRST CLASS MAIL U.S. POSTAGE PAID BOTHELL, WA PERMIT No. 103 FIRST CLASS
for more information go to www.murphyauction.com Phone 425.486.1246

2006 Isuzu Flatbed Truck

NO MINIMUM / NO RESERVE AUCTION
Rolling Stock 2006 ISUZU NPR C/O flatbed truck 2003 FORD F350 Super Duty pickup 2000 FORD F250 pickup 1999 FORD F150 pickup 1996 FORD F250 pickup (3) 1995 FORD F250 pickups 1994 FORD F250 pickup 1992 FORD F250 pickup TOYOTA HRT forklift, propane Shop Equipment & Tools 2006 JET HVBS-56M horizontal band saw, s/n: 060320620 RYOBI BTStable saw, s/n: N040934338 MAKITA 2708 table saw, s/n: 291571E TAPCO MX10 Max Brake aluminum siding brake, SENCO portable jobsite air compressor, s/n: 357898 EMGLO portable jobsite air compressor, s/n: 061387180 RIDGID 0F45150B portable jobsite air compressor, s/n: 12220700003552 GRACO ULTRA 1000 airless paint sprayer DELTA 12 portable planer DELTA 37-variable speed bench jointer, s/n: 595 (6) Industrial shop vacs (5) ALUM-A-POLE CORP 24 scaffolding WERNER PJ-100 pump jack system (10) Portable jobsite halogen tripod lights FOSTORIA portable heater MAXX AIR high velocity portable shop fan (2) 6 ladders (4) 8 fiberglass ladders (2) 12 fiberglass ladders (3) 24 aluminum extension ladders (3) 20 fiberglass extension ladders 30 fiberglass ladder 32 fiberglass ladder (4) Job boxes (2) Hand trucks BIG JOE 3000 lb capacity pallet jack Assortment of contractors equipment including: roto hammer, sawzalls, chop saws, sanders, cordless drills, skill saws, SENCO nail guns, box fans, appliances, gas cans, extension cords, air lines, floor jack, propane tanks, portable heaters, fasteners, levels, spare tires, landscape pavers, electric chainsaws, much more Office Equipment Office equipment including: CANON Image Runner 2200 copier, file cabinets, printers, fire proof file cabinet, (7) office desks, (8) office chairs, bookcases, more
TERMS & CONDITIONS 10% BUYERS PREMIUM PAYMENT: Full payment must be made by the close of business, auction day. Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or company checks accepted ONLY with bank letter of guarantee. Absentee bids accepted with 25% deposit REMOVAL: No purchase may be removed during the auction unless otherwise announced by the auctioneer. All items must be removed between 8am & 4pm, Thursday & Friday, November 18 & 19. Announcements made by the auctioneer at the time of sale take precedence over printed matter. Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis. Due to safety & insurance reasons, persons under 12 not admitted. Washington Auctioneers License #1960 DRIVER DIRECTIONS From east or westbound I-84, take the NE 181st Ave exit (#13). Drive south on 181st approximately 2/10 mile to NE San Rafael St. Turn right on San Rafael and drive west approximately 1/10 mile to NE 178th Ave. Turn right and drive north on 178th approximately 2/10 mile where 178th turns into NE Sacramento St. Drive west on Sacramento approximately 3/10 mile to the auction site, located on the left. WATCH FOR AUCTION SIGNS FOOD SERVICE AVAILABLE AT THE AUCTION SITE
For additional descriptions and photos log onto www.murphyauction.com
Commercial & Industrial Auctioneers Seattle 425.486.1246 - Portland 503.463.4444