30cc STRING TRIMMERS 30cc BRUSHCUTTERS REPAIR SHEET
MODEL NUMBERS RY30120, RY30140, RY30160
RYOBI 30CC STRING TRIMMERS AND BRUSHCUTTERS MODEL NUMBERS RY30120, RY30140, RY30160

FIGURE A PARTS LIST

KEY NO. SERVICE NUMBER KEY NO. SERVICE NUMBER 983000855 983000855R 01-30-06

DESCRIPTION

SPARK PLUG (*CHAMPION RCJ4). 1 STARTING LABEL. 1 AIR BOX COVER. 1 AIR FILTER ELEMENT. 1 SWITCH (MOMENTARY CONTACT). 1 MODEL LABEL (CS30). 1 MODEL LABEL (SS30). 1 MODEL LABEL (BC30). 1 FUEL CAP ASSEMBLY. 1 LOGO PLATE. 1 WARNING DECAL (CS30 AND SS30). 1 WARNING DECAL (BC30). 1 UPPER BOOM ASSEMBLY (CS30 AND SS30). 1 UPPER BOOM ASSEMBLY UPPER (BC30). 1 CONTROL HANDLE ASSEMBLY. 1 * SCREW (10-14 X 1 in.). 9 TRIGGER LOCK. 1 TRIGGER. 1 TORSION SPRING. 1 COMPRESSION SPRING. 1
THROTTLE AND LEAD ASSEMBLY.1 FRONT HANDLE ASSEMBLY (CS30 AND SS30). 1 * HEX NUT (1/4-20) (BC30). 2 WASHER (BC30). 2 HANDLE BAR CLAMP (BC30). 2 * BOLT (1/4-20 X 1 in. HEX HD.) (BC30). 1 * BOLT (1/4-20 X 1-1/2 in. HEX HD.) (BC30) 1 J HANDLE AND GRIP (BC30). 1 LOCK WASHER (BC30). 2 SHOULDER STRAP (BC30). 1 HANGER CAP. 1 * SCREW (10-24 X 7/8 in.). 1 CHOKE LABEL. 1 * BOLT (M5 X 30 mm HEX HD.) (CS30 AND SS30). 2 * WING NUT (M5). 2 HANDLE BAR CLAMP (CS30 AND SS30). 1 OPERATOR'S MANUAL (960085001) REPAIR SHEET (REV:02) (940627026)
* PURCHASE LOCALLY FROM RETAILER WHERE UNIT WAS PURCHASED. 3
KEY NO. PART NUMBER DESCRIPTION QTY. SCREW (10-24 X 2-1/8 in. TORX TR. HD. ). 2 HEAT SHIELD.. 1 MUFFLER ASSEMBLY..1 SCREW (RECESSED PAN HD.).. 3 OUTLET TUBE.. 1 SCREEN... 1 MUFFLER GASKET.. 1 SHORT BLOCK ASSEMBLY (30 cc) (EXTERNAL GASKETS NOT INCLUDED). 1 INTAKE GASKET.. 1 COVER GASKET.. 1 REAR HOUSING.. 1 SCREW (10-14 X 7/8 in. TRUSS HD. T.F.). 2 SCREW W/LOCK WASHER (10-24 X 3/4 in. PAN HD. TORX).. 4 SCREW (PAN HD.).. 2 CARBURETOR GASKET.. 1 CARBURETOR GASKET (NON-STRATO). 1 AIR FILTER BASE.. 1 LOCK NUT (10-24).. 2 CARBURETOR ASSEMBLY.. 1 SPACER... 1 HEAT DAM.. 1 CARBURETOR MOUNTING BOLT (#10 X 2-1/2 in.)... 2 TANK INSULATION GASKET. 1 RUBBER BUMPER... 1 FUEL TANK ASSEMBLY W/CAP.. 1 BUMPER.. 2 KEY NO. 51 PART NUMBER 660342002 DESCRIPTION QTY.
ROTOR W/PAWLS ASSEMBLY.. 1 WASHER.. 1 LEAD W/TERMINALS.. 1 LEAD W/TERMINALS.. 1 IGNITION MODULE W/3 SEC. KILL SWITCH.. 1 SCREW (THD FORMING). 2 SPACER TUBE.. 1 WASHER (PKG)... 1 CLUTCH ASSEMBLY.. 1 CLUTCH WASHER... 1 DRUM AND CONNECTOR.. 1 * SCREW (10-24 X 3/4 in.).. 3 STARTER HOUSING AND EYELET ASSEMBLY... 1 SPRING AND CONTAINER.. 1 STARTER PULLEY ASSEMBLY.. 1 SCREW (THREAD FORMING). 3 BAFFLE/ISOLATOR.. 1 STARTER ROPE 42 (PKG).. 1 STARTER GRIP.. 1 STARTER HOUSING ASSEMBLY. 1 PISTON RING.. 2 PISTON W/ROD ASSEMBLY. 1 CYLINDER, 30CC.. 1 CYLINDER GASKET.. 1 SCREW (M5 X 20 MM).. 3
* STANDARD HARDWARE ITEM MAY BE PURCHASED LOCALLY ** STOCK ITEM MAY BE SECURED THROUGH THE HARDWARE DEPARTMENT OF MOST HOME DEPOT STORES 5
FIGURE B MODEL RY2 FIGURE B MODEL RY30140

FIGURE B MODEL RY30160

6 Key Service No. Number

308044002 678022001

8 Key Service No. Number

678022001 518367001

Description
Expand-it Label Warning Decal Curved Shaft Assembly (Incl. 1,2) Grass Deflector Fastener Kit Spool Retainer (Black) Complete String Head (.080 in.) (Incl. 6,8,9) Spool and String (.080 in.) Compression Spring
Expand-it Label Warning Decal Straight Shaft Assembly (Incl. 1,2) Grass Deflector Assembly (Incl. 7) Flanged Washer Shaft Adapter Screw (1/4-20 x 0.70-0.75 in.) Gear Case Assembly Screw (1/4-20 x 1-1/4 in.) Clamp Screw (10-24 x 5/8 in. Hex Hd.) Spool Retainer (Red) Spool and String (.095 in.) Complete String Head Assembly (.095 in.) (Incl. 12,13,15) Compression Spring Spacer

Key No.

Service Number

518367001 678019002

Expand-it Label Warning Decal Brushcutter Assy. (Incl. 1,2) Gear Case Assembly 8 in. Blade Guard Grass Deflector Assy. Tri-Arc Blade Screw (1/4-20 x 0.70-0.75 in.) Lock Nut Cupped Washer Flanged Washer Screw (10-24 x 1/2 in.) Screw (10-24 x 5/8 in.) Clamp Screw (1/4-20 x 1-1/4 in.) Holding Pin Spool Retainer (Red) Complete String Head (.095 in.) (Incl. 17,19,20) Spool and String (.095 in.) Compression Spring Spacer Shaft Adapter
* Purchase locally from retailer where unit was purchased.

30cc String Trimmer with Expand-It Edger Attachment Model No. RY30130 Replacement Parts List Taille-bordures ligne de 30 cc et Expand-it accessoire coupe-bordures No. de Modle RY30130 Liste des pices de rechange Recortadoras de hilo 30 cc y accesorio Expand-it para recortar borde Modelo No. RY30130 Lista de piezas de repuesto
TECHTRONIC INDUSTRIES NORTH AMERICA, INC.
983000-904 1-11-06 (REV:01) 1428 Pearman Dairy Road, Anderson, SC 29625 Phone 1-800-860-4050 www.ryobitools.com
RYOBI 30CC STRING TRIMMER WITH EXPAND-IT EDGER ATTACHMENT MODEL NUMBER RY30130

FIGURE A

RY30120

FIGURE A PARTS LIST

KEY NO. 13

PART NUMBER 518011002

DESCRIPTION

KEY NO. 24

PART NUMBER 983000904
Spark Plug (*Champion RCJ4). 1 Starting Label. 1 Air Box Cover. 1 Air Filter Element. 1 Switch (Momentary Contact). 1 Model Label. 1 Fuel Cap Assembly. 1 Logo Plate. 1 Warning Decal. 1 Upper Boom Assembly (Includes Key No. 9). 1 Control Handle Assembly. 1 * Screw (10-14 x 1 in.). 9 Trigger Lock. 1
Trigger. 1 Torsion Spring. 1 Compression Spring. 1 Throttle and Lead Assembly. 1 Front Handle Assembly. Hanger Cap. 1 Screw (10-24 x 7/8 in.). 1 Choke Label. 1 * Bolt (M5 x 30 mm Hex Hd.). 2 * Wing Nut (M5). 2 Handle Bar Clamp. 1 Operators Manual Replacement Parts List
* Purchase locally from retailer where unit was purchased.

KEY NO. 9 10

SERVICE NUMBER 308043001 678022001
DESCRIPTION QTY. Expand-it Label.....1 Warning Decal.....1 Curved Shaft Assembly......1 Grass Deflector.....1 Fastener Kit......1 Spool Retainer (Black).....1 Complete String Head (.080 in.).....1 Spool and String (.080 in.) w/Spring.....1 Housing and Eyelet.....1 Compression Spring......1 4

UT15518E

27 (25)

KEY NO. 21

PART NUMBER 099078001022

KEY NO. 38

PART NUMBER 099078001016
Blade Assembly (Includes Key Nos. 2-5).. 1 * Lock Nut (M8).. 1 Cupped Washer.. 1 Blade.. 1 Flanged Washer.. 1 Blade Guard Assembly.. 1 (Includes Key Nos. 7-15) * Screw (10-24 X 5/8 in. Hex Hd.). 3 * Lock Washer (5 mm).. 3 Flange... 1 Warning Decal... 1 Expand-it Logo Label.. 1 Blade Guard.. 1 Drag Flap.. 1 * Washer (6 mm).. 2 * Hex Nut (M6).. 2 Support Plate.. 1 Wheel Mounting Plate.. 1 * Washer (10 mm).. 1 Adjusting Knob With Hex Nut.. 1 * Hex Lock Nut (M8).. 1 * Screw (M5 X 16 mm Hex Hd.).. 1
* Washer (5 mm).. 1 Curb Guide... 1 Wheel Assembly.. 1 (Includes Key Nos. 25-27) * Washer (10 mm).. 2 Wheel.. 1 * Push Nut (10 mm)... 1 Gear Head & Screw Assembly. 1 (Includes Key Nos. 29-32) * Screw (M5 X 12 mm Hex Hd.).. 1 * Lock Washer (5 mm).. 1 * Cap Screw (M6 X 30 mm).. 1 Gear Head Assembly.. 1 Boom Assembly.. 1 (Includes Key Nos. 34-35) Warning Decal... 1 Warning Label (UL).. 1 Hanger Cap.. 1 Holding Pin... 1 Support Arm Assembly.. 1 (Includes Key Nos.16-24)