OPERATOR'S MANUAL String Trimmer PLT3043A RY70101
Your new trimmer has been engineered and manufactured to Ryobis high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operators manual.
Thank you for buying a Ryobi trimmer.
SAVE THIS MANUAL FOR FUTURE REFERENCE

TABLE OF CONTENTS

Safety..... 2 - 3 Symbols...... 4 - 5 Technical Data..... 5 Unpacking..... 6 Features...... 6 Assembly...... 7 Operation..... 8 - 10 Maintenance..... 11 - 13 Troubleshooting..... 14 - 15 Warranty...... 16 Safety Directive..... 16

SAFETY

WARNING:
Do not attempt to operate this trimmer until you have read thoroughly and understand completely all instructions, safety rules, etc. contained in this manual. Failure to comply can result in accidents involving fire, electric shock, or serious personal injury. Save operator's manual and review frequently for continuing safe operation, and instructing others who may use this tool.

READ ALL INSTRUCTIONS

GENERAL SAFETY RULES For safe operation, read and understand all instructions before using the trimmer. Follow all safety instructions. Failure to follow all safety instructions listed below, can result in serious personal injury. Do not allow children or untrained individuals to use this unit. Never start or run the engine in a closed or poorly ventilated area; breathing exhaust fumes can kill.
Clear the work area before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the string head. Wear full eye and hearing protection while operating this unit. Wear heavy long pants, boots, and gloves. Do not wear loose fitting clothing, short pants, jewelry of any kind, or go barefoot.
Secure long hair so it is above shoulder level to prevent entanglement in any moving parts. Keep all bystanders, children, and pets at least 15 m (50 ft.) away. Do not operate this unit when you are tired, ill, or under the influence of alcohol, drugs, or medication. Do not operate in poor lighting. Keep firm footing and balance. Do not overreach. Overreaching can result in loss of balance or exposure to hot surfaces. Keep all parts of your body away from any moving part. Do not touch areas around the muffler or cylinder of the trimmer, these parts get hot from operation. Always stop the engine and remove the spark plug wire before making any adjustments or repairs except for carburetor adjustments. Inspect the unit before each use for loose fasteners, fuel leaks, etc. Replace any damaged parts before use. The string head will rotate during carburetor adjustments. It has been reported that vibrations from hand-held tools may contribute to a condition called Raynauds Syndrome in certain individuals. Symptoms may include tingling, numbness and blanching of the fingers, usually apparent upon exposure to cold. Hereditary factors, exposure to cold and dampness, diet, smoking and work practices are all thought to contribute to the development of these symptoms. It is presently unknown what, if any, vibrations or extent of exposure may contribute to the condition. There are measures that can be taken by the operator to possibly reduce the effects of vibration: a) Keep your body warm in cold weather. When operating the unit wear gloves to keep the hands and wrists warm. It is reported that cold weather is a major factor contributing to Raynauds Syndrome. b) After each period of operation, exercise to increase blood circulation. c) Take frequent work breaks. Limit the amount of exposure per day. d) Keep the tool well maintained, fasteners tightened and worn parts replaced. If you experience any of the symptoms of this condition, immediately discontinue use and see your physician about these symptoms. Mix and store fuel in a container approved for gasoline. Mix fuel outdoors where there are no sparks or flames. Wipe up any fuel spillage. Move 9 m (30 ft. ) away from refueling site before starting engine. Stop the engine and allow to cool before refueling or storing the unit. Allow the engine to cool; empty the fuel tank and secure the unit from moving before transporting in a vehicle.
SPECIFIC SAFETY RULES FOR TRIMMER USE Replace string head if cracked, chipped, or damaged in any way. Be sure the string head is properly installed and securely fastened. Failure to do so can cause serious injury. Make sure all guards, straps, deflectors and handles are properly and securely attached. Use only the manufacturer's replacement string in the cutting head. Do not use any other cutting attachment. Never operate unit without the grass deflector in place and in good condition. Maintain a firm grip on both handles while trimming. Keep string head below waist level. Never cut with the string head located over 76 cm (30 in.) or more above the ground.

SYMBOLS

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME Safety Alert Symbol EXPLANATION Indicates danger, warning or caution. It means attention!!! Your safety is involved. Your manual contains special messages to bring attention to potential safety concerns as well as operating and servicing information. Please read all the information carefully to assure satisfaction and safe use. Wear eye, hearing and protection when operating this equipment.
Read Your Operators Manual
Wear eye and hearing protection.

Keep bystanders away.

Keep all bystanders at least (15 m) 50 feet away.

Ricochet.

Danger of Ricochet.

No blade.

Do not install any type of blade on this unit.

RPM Decal

min -1
Rotational direction and maximum speed of the shaft for the cutting attachment. Wear non-slip safety footwear when using this equipment. Wear non-slip, heavy-duty gloves.

Gloves

No Smoking
Do not smoke when mixing fuel or filling fuel tank.

Gasoline

Use unleaded gasoline intended for automotive use with an octane rating of 87 ([R + M] / 2) or higher.
Use 2-cycle oil for air cooled engines.

Mix Gasoline and Oil

Mix the fuel mix thoroughly and also each time before fueling.

Switch

On/Off Switch I = ON to Run O = OFF to Stop
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

SYMBOL

MEANING
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury.

injury.
Indicates a potentially hazardous situation which, if not avoided, could result in serious

CAUTION:

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices that may cause property damage. Advises you of information or instructions vital to the operation or maintenance of the equipment.

SAVE THESE INSTRUCTIONS

TECHNICAL DATA
Without fuel and string head.... 4.48 Kg Without fuel with string head.... 4.67 Kg Fuel tank volume..... 42.5 cm3 Cutting swath...... 432 mm Engine displacement.... 30 cm3 Maximum engine performance (in accordance with ISO 8893)... 0.78 kW Maximum rotational frequency of the spindle.... 9000 min-1 Engine Speed (rotational frequency) at recommended max. spindle rotational frequency.. 12500 min-1 Engine speed (rotational frequency) at idle.... 3100 - 4300 min-1 Fuel consumption (in accordance with ISO 8893) at max. engine performance... 0.52 kg/h Specific fuel consumption (in accordance with ISO 8893) at max. engine performance.. 0.47 kg/h Vibration level idling Front Handle.... 4.8 Rear Handle.... 4.3 Vibration level racing Front Handle.... 7.1 Rear Handle.... 9.0 Sound pressure level (in accordance with EN ISO 11806:1997, ISO 7917:1987)... 100 Sound power level (in accordance with ISO 10884)... 114 Weight

UNPACKING

INSTRUCTIONS
Carefully remove the product from the carton. Inspect the product to make sure no breakage or damage occurred during shipping. Do not discard the packing material until you have inspected and operated the product.
PACKING LIST FOR OWNER'S KIT
Grass deflector Front handle Muffler guard, torx wrench and screws Hardware Operator's manual

FEATURES

MUFFLER GUARD CHOKE LEVER THROTTLE CONTROL AND REAR HANDLE IGNITION SWITCH STARTER GRIP
THROTTLE TRIGGER DRIVE SHAFT HOUSING

FRONT HANDLE

GRASS DEFLECTOR

STRING HEAD Fig. 1

Petrol powered line trimmers 30 cc
Large cutting width : 430 mm Light weight, well balanced handy tool TTI powerful 2 stroke engine Diaphragm carburettor allowing for operation in any position Electronic ignition for easy start Anti-vibration adjustable loop handle Dual line cutting head Automatic bump feed head Rust proof driving tube
Non contractual document and photos.

PLT-3043A

PLT-3043E
Safety centrifugal clutch

PLT-3043A PLT-3043E

Technical specifications TTI 2 stroke engine, displacement Maximum power at 6500 rpm Cutting width Cutting line diameter Tank capacity Maximum sound pressure Weight
30 cc 0,9 cv / 700 W 430 mm 2 mm 0,5 l 104 dB(A) 4,6 kg
Standard accessories Dual line cutting head
gencod PLT-3043A PLT-3043E
496067109102 496067109119

22-05-03