RYOBI 18 in. CHAIN SAW MODEL NO. RY43006 REPAIR SHEET
RYOBI CHAIN SAW MODEL NUMBER RY43006

SEE FIGURE B 31

Figure A
The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your CHAIN SAW or when ordering repair parts.

PARTS LIST (FIGURE A)

KEY NO. 9
PART NUMBER 301139003 940299891

DESCRIPTION

KEY NO.
PART NUMBER 983000640R 07-01-05
* SCREW (M4 X 12 mm PAN HD.).. 3 * FLAT WASHER (OD10 X ID4.2 X 1.0). 1 BAR COVER KNOB WITH BEVEL GEAR. 1 BAR COVER... 1 GUIDE BAR NUT... 1 GUIDE BAR NUT BUSHING.. 1 E-RING.. 2 ADJUST SCREW ASSEMBLY.. 1 RUBBER SEAL.. 1 * WASHER (OD9.5 X ID5.3 X 1).. 1 GUIDE BAR ADJUST PLATE.. 1 COVER PLATE.. 1 C-RING (1 mm).. 1 WASHER... 1 SPROCKET.. 1 WASHER... 1 SAW BAR ASSEMBLY (18 in.) (INCLUDES KEY NOS. 20-21).. 1 CHAIN TENSIONER LABEL.. 1
SAW CHAIN ASSEMBLY.. 1 SAFE-T-TIP (SCREW AND WASHER). 1 CHAIN TIP...1 BRUSH ASSEMBLY..2 SCREW (M8 X 1/2 in. PAN HD.).. 2 LOGO LABEL... 1 SCREW (M4 X 16 mm PAN HD.).. 4 BRUSH CLAMP.. 2 BLADE GUARD (SCABBARD).. 1 SCRENCH... 1 SCREW (M4 X 22 mm PAN HD.).. 1 BAR COVER W/ LABEL ASSEMBLY.. 1 (INCLUDES KEY NOS. 1-4, 7-12, 18). 1 MOTOR END CAP W/ LABEL ASSEMBLY. 1 (INCLUDES KEY NO. 24).. 1 CARRYING CASE.. 1 SCREW (M4.5 X 22 mm PAN HD.). 1 OPERATORS MANUAL (960986002) REPAIR SHEET (REV:01)
WARNING: Improper repair of a double insulated tool can result in damage to the double insulation system possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call 1-800-860-4050.
* STANDARD HARDWARE ITEM MAY BE PURCHASED LOCALLY 3

Figure B

PARTS LIST (FIGURE B)

PART NUMBER * * * *

PART NUMBER 940186111
SCREW (M4 X 12 mm PAN HD.)..1 SCREW (M4 X 14 mm PAN HD.)..3 SCREW (M4 X 22 mm PAN HD.)..9 SCREW (M4.5 X 22 mm PAN HD.)..1 OIL RESERVOIR CAP..1 LONG OIL TUBE..1 * SCREW (M4.5 X 14 mm PAN HD.)..3 OIL PUMP ASSEMBLY..1 SHORT OIL TUBE..1 * SCREW (M4.5 X 18 mm PAN HD.)..2 HOUSING COVER ASSEMBLY..1 HOUSING SUPPORT W/ LABEL ASSEMBLY (INCLUDES KEY NO. 29)..1 OIL TANK ASSEMBLY (INCLUDES KEY NO. 5).1 GEAR ASSEMBLY W/ BEARING..1
GEAR CASE ASSEMBLY..1 MOTOR ASSEMBLY W/ BEARING.1 RECEPTACLE & RECESS PLUG ASSEMBLY.1 SWITCH... 1 SPRING (0.5 X ID4.5 X 23)..1 SWITCH LEVER..1 TRIGGER...1 MAIN TRIGGER SPRING (0.8 X OD7.9 X 34)..1 LOCK OFF BUTTON..1 SPRING...1 FAN BAFFLE...1 * SCREW (#8 X 2-1/8 in. PAN HD.)..2 SAFETY GUARD.. 1 FRONT HANDLE... 1 DATA LABEL..1
* STANDARD HARDWARE ITEM MAY BE PURCHASED LOCALLY 5

POWER CORD SWITCH

WHITE LEAD

BLACK LEAD

MOTOR BRUSHES

RED LEAD

WIRING DIAGRAM

For Parts Call 606-678-9623 or 606-561-4983
RYOBI 18 in. CHAIN SAW MODEL NO. RY43006 REPAIR SHEET

www.mymowerparts.com

RYOBI CHAIN SAW MODEL NUMBER RY43006

SEE FIGURE B 31

Figure A
The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your CHAIN SAW or when ordering repair parts.

PARTS LIST (FIGURE A)

KEY NO. 9
PART NUMBER 301139003 940299891

DESCRIPTION

KEY NO.
PART NUMBER 983000640R 02-28-06
* SCREW (M4 X 12 mm PAN HD.).. 3 * FLAT WASHER (OD10 X ID4.2 X 1.0).. 1 BAR COVER KNOB WITH BEVEL GEAR. 1 BAR COVER... 1 GUIDE BAR NUT... 1 GUIDE BAR NUT BUSHING.. 1 E-RING.. 2 ADJUST SCREW ASSEMBLY. 1 RUBBER SEAL.. 1 * WASHER (OD9.5 X ID5.3 X 1). 1 GUIDE BAR ADJUST PLATE.. 1 COVER PLATE.. 1 C-RING (1 mm).. 1 WASHER... 1 SPROCKET.. 1 WASHER... 1 SAW BAR ASSEMBLY (18 in.) (INCLUDES KEY NOS. 20-21). 1 CHAIN TENSIONER LABEL.. 1
SAW CHAIN ASSEMBLY.. 1 SAFE-T-TIP (SCREW AND WASHER).. 1 CHAIN TIP...1 BRUSH ASSEMBLY..2 SCREW (M8 X 1/2 in. PAN HD.).. 2 LOGO LABEL... 1 SCREW (M4 X 16 mm PAN HD.).. 4 BRUSH CLAMP.. 2 BLADE GUARD (SCABBARD). 1 SCRENCH... 1 SCREW (M4 X 22 mm PAN HD.).. 1 BAR COVER W/ LABEL ASSEMBLY. 1 (INCLUDES KEY NOS. 1-4, 7-12, 18).. 1 MOTOR END CAP W/ LABEL ASSEMBLY. 1 (INCLUDES KEY NO. 24).. 1 CARRYING CASE.. 1 SCREW (M4.5 X 22 mm PAN HD.). 1 OPERATORS MANUAL (960986002) REPAIR SHEET (REV:02)
WARNING: Improper repair of a double insulated tool can result in damage to the double insulation system possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call 1-800-860-4050.
* STANDARD HARDWARE ITEM MAY BE PURCHASED LOCALLY

Figure B

PARTS LIST (FIGURE B)

PART NUMBER * * * *

PART NUMBER 940186111 512196001
SCREW (M4 X 12 mm PAN HD.)..1 SCREW (M4 X 14 mm PAN HD.)..3 SCREW (M4 X 22 mm PAN HD.)..9 SCREW (M4.5 X 22 mm PAN HD.)..1 OIL RESERVOIR CAP..1 LONG OIL TUBE..1 * SCREW (M4.5 X 14 mm PAN HD.)..3 OIL PUMP ASSEMBLY..1 SHORT OIL TUBE...1 * SCREW (M4.5 X 18 mm PAN HD.)..2 HOUSING COVER ASSEMBLY (INCLUDES KEY NO. 30)..1 HOUSING SUPPORT W/ LABEL ASSEMBLY (INCLUDES KEY NO. 29)..1 OIL TANK ASSEMBLY (INCLUDES KEY NO. 5)..1 GEAR ASSEMBLY W/ BEARING..1
GEAR CASE ASSEMBLY..1 MOTOR ASSEMBLY W/ BEARING..1 RECEPTACLE & RECESS PLUG ASSEMBLY.1 SWITCH... 1 SPRING (0.5 X ID4.5 X 23)..1 SWITCH LEVER..1 TRIGGER...1 MAIN TRIGGER SPRING (0.8 X OD7.9 X 34)..1 LOCK OFF BUTTON...1 SPRING...1 FAN BAFFLE..1 * SCREW (#8 X 2-1/8 in. PAN HD.)..2 SAFETY GUARD... 1 FRONT HANDLE... 1 DATA LABEL..1 RUBBER SEAL..1

POWER CORD SWITCH

WHITE LEAD

BLACK LEAD

MOTOR BRUSHES

RED LEAD

WIRING DIAGRAM