RYOBI ELECTRIC CULTIVATOR MODEL NO. RY46501B REPAIR SHEET
RYOBI ELECTRIC CULTIVATOR MODEL NUMBER RY46501B FIGURE A
RYOBI ELECTRIC CULTIVATOR MODEL NUMBER RY46501B
The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your ELECTRIC CULTIVATOR or when ordering repair parts.

PARTS LIST FOR FIGURE A

KEY NO.

PART NUMBER

000998261 660714002

DESCRIPTION

* * * * * *
GEAR BOX ASSY W/TUBE AND LINER....1 LINER-HELIX (47 mm)....1 TINE ASSEMBLY (A)....1 TINE ASSEMBLY (B)....1 TINE ASSEMBLY (C)....1 TINE ASSEMBLY (D)....1 FELT WASHER....2 CLEVIS CLIP.....2 WARNING LABEL (BACK LEFT)....1 WARNING LABEL (BACK RIGHT)...1 WARNING LABEL (FOOT)...1 RECEIVER RETAINER ASSEMBLY...1 KNOB....1 SCREW (M5 x 16 mm SOC. WASHER HD. CAP)...1 BOLT (1/4-20 x 3/4 in. HEX HD.)...4 LOCK NUT (1/4-20)...9 PLASTIC CLIP....2 BOLT (HANDLE) (1/4-20 x 1-1/2 in. HEX HD.)...4 KNOB (1/4-20)....2 CARRAIGE BOLT (1/4-20 x 2-1/4 in.)...2 NUT-ACORN, CENTERLOCK (1/4-20)...2 HANDLE, UPPER ASSEMBLY W/GRIP AND LABEL (INC. KEY NOS. 17, 23, 27 & 53)...1 BOOM LABEL....1 THROTTLE CABLE ASSEMBLY....1 WASHER (FOR ATTACHING THROTTLE CABLE TO MOTOR)..1 SCREW (M4 x 16 mm) (FOR ATTACHING THROTTLE CABLE TO MOTOR).1 CLIP....2 TRIGGER....1 LOCK OUT LEVER....1 PIN....1 SPRING....1 CLEVIS PIN....1 RETAINING RING....1 TANK, BALLAST ASSEMBLY (INC. KEY NO. 35)...1 LOGO LABEL....1 LID....1 MOUNTING BRACKET...1 DRIVE SHAFT....1 MOTOR AND PINION ASSEMBLY...1 LABEL, ELECTRIC AMP LOGO....1 SCREW (M5 x 19 mm SOC. HD. CAP)...2 SQUARE NUT (M5)....2 SCREW (8-16 x 1/2 in. PAN HD.)....1 WHEEL/DRAG STAKE ASSEMBLY (INC. KEY NOS. 45, 46, 47, 48, 49 AND 50).1 FRAME ASSEMBLY...1 DRAG STAKE....1 HITCH PIN....1 WASHER....2 WHEEL ASSEMBLY....2 PUSH CAP NUT (1/2 in.)....2 HANG TAG, WHEEL ASSEMBLY (NOT SHOWN)...1 TINE SHIELD ASSEMBLY (INC. KEY NOS. 9,10 AND 11)..1 GRIP.....1 REAR HOUSING ASSEMBLY (INC. KEY NOS. 40 & 55)...1 DATA LABEL....1 SCREW (M4 x 13 mm TF.)....2 LOWER HANDLE ASSEMBLY (INC. KEY NO. 17)...1 BOLT (1/4-20 X 5/8 in.)...1
* Standard Hardware Item May Be Purchased Locally 3
RYOBI ELECTRIC CULTIVATOR MODEL NUMBER RY46501B FIGURE B

PARTS LIST FOR FIGURE B

KEY NO. 37 PART NUMBER 983000885 983000884R 05-10-06
DESCRIPTION QTY. * SCREW (M5 X 26 mm).... 3 INNER HOUSING... 1 * SCREW (8-16 x 5/8 in. PAN HD.)... 2 BRUSH TUBE CLAMP.... 2 BRUSH TUBE ASSEMBLY.... 2 * SCREW (M3.5 X 16 mm)... 3 SWITCH COVER... 1 SWITCH, ON-OFF ASSEMBLY... 1 MOTOR HOUSING.... 1 SCREW (M4 x 12 mm PAN HD.)... 1 BALL BEARING (NTN 608ZZ C3/1E).. 1 FIELD ASSEMBLY.... 1 * SCREW (8-10 X 2-1/2 in. PAN HD.)... 2 FAN SHROUD.... 1 POWER CORD.... 1 ARMATURE ASSEMBLY... 1 RETAINING RING.... 2 GROMMET.... 1 BALL BEARING.... 1 FELT SEAL.... 1 FIBRE WASHER RING.... 1 RUBBER PLUG.... 1 GEAR BOX.... 1 FLANGE BEARING.... 1 WASHER.... 1 GEAR.... 1 CLUTCH.... 1 SPRING.... 8 BALL (5.96 mm).... 8 CLUTCH PLATE.... 1 OUTPUT SHAFT... 1 BALL BEARING (6003)... 1 GASKET.... 1 GEAR CASE.... 1 * SCREW (M5 x 14 mm).... 3 PLUG (6 mm x 17 mm)... 8 MOTOR ASSEMBLY (INC. KEY NOS. 12 AND 16)... 1 OPERATORS MANUAL (960994003) REPLACEMENT PARTS LIST (961032005) REPAIR SHEET (REV:01)
* Standard Hardware Item May Be Purchased Locally 5

BLACK MOTOR LEAD

WHITE POWER CORD LEAD

SWITCH

POWER CORD

RED BRUSH LEAD

BLACK POWER CORD LEAD

WHITE MOTOR LEAD

WIRING DIAGRAM