RYOBI TP30 Gas Pruner MODEL NO. RY52014 REPAIR SHEET
RYOBI TP30 GAS PRUNER MODEL NO. RY52014

1 SEE FIGURE B

Figure A

PARTS LIST (FIGURE A)

KEY NO. 17
PART NUMBER 870170001 940967004 308439001

DESCRIPTION

KEY NO.
PART NUMBER 983000882R 02-09-06
SPARK PLUG (*CHAMPION RCJ4). 1 STARTING LABEL.. 1. AIR BOX COVER... 1 AIR FILTER ELEMENT.. 1 SWITCH (MOMENTARY CONTACT). 1 MODEL LABEL (TP30).. 1 FUEL CAP ASSEMBLY.. 1 LOGO PLATE... 1 WARNING DECAL (TP30).. 1 UPPER BOOM ASSEMBLY (TP30). 1. CONTROL HANDLE ASSEMBLY.. 1. * SCREW (10-14 X 1 in.).. 9 TRIGGER LOCK.. 1 TRIGGER... 1 TORSION SPRING.. 1 COMPRESSION SPRING.. 1 THROTTLE AND LEAD ASSEMBLY.. 1
STRAP HANGER (TP30). 1 * HEX NUT (1/4-20)... 2 WASHER.. 2 HANDLE BAR CLAMP. 2 * BOLT (1/4-20 X 1 in. HEX HD.).. 1 * BOLT (1/4-20 X 1-1/2 in. HEX HD.). 1 J HANDLE AND GRIP.. 1 LOCK WASHER.. 2 SHOULDER STRAP... 1. HANGER CAP.. 1 * SCREW (10-24 X 7/8 in.).. 1 CHOKE LABEL.. 1 COMBINATION WRENCH.. 1 OPERATORS MANUAL (961031001) REPAIR SHEET (REV:00)
* STANDARD HARDWARE ITEM MAY BE PURCHASED LOCALLY

Figure B

PARTS LIST (FIGURE B)
KEY NO. PART NUMBER * * * * KEY NO.
PART NUMBER 660342002 * *
screw (10-24 x 2-1/8 in. torx tr. hd. ).. 2 heat shield... 1 MUFFLER ASSEMBLY...1 screw (recessed pan hd.).. 3. outlet tube.. 1 screen... 1 MUFFLER GASKET.. 1. short block assembly (30 cc) (external gaskets not included). 1. intake gasket... 1 cover GASKET... 1 rear housing... 1 screw (10-14 x 7/8 in. tRUSS hd. T.f.). 2 SCREW W/LOCK WASHER (10-24 x 3/4 in. pan hd. TORX).. 4 screw (10-24 pan hD.).. 2 CArBURETOR GASKET.. 1 CArBURETOR GASKET (non-strato). 1 AIR FILTER base.. 1 LOCK nut (10-24).. 2 carburetor assembly.. 1 spacer... 1 heat dam.. 1 carburetor mounting bolt (#10 x 2-1/2 in.).. 2 tank insulatION gasket.. 1 rubber bumper.. 1 fuel tank assembly w/cap.. 1 bumper... 2
rotor w/pawls assembly.. 1. washer... 1 lead W/TERMINALS.. 1. lead W/TERMINALS.. 1. ignition module w/3 sec. kill SWITCH. 1. screw (8-32 thd forming). 2 spacer tube.. 1 washer (pkg)... 1. clutch assembly.. 1 clutch washer... 1. drum and connector.. 1 screw (10-24 x 3/4 in.).. 3 starter housing and eyelet assembly.. 1. spring and container.. 1 starter pulley assembly.. 1. screw (thread formING). 3. baffle/isolator.. 1. starter rope 42 (pkg).. 1. starter grip.. 1 starter housing assembly.. 1. piston ring.. 2. piston w/rod assembly.. 1 cylinder, 30cc.. 1 cylinder gasket.. 1. screw (m5 x 20 mm).. 3

Figure C

PARTS LIST (FIGURE C)

KEY NO. 3

PART NUMBER 090038001024 090038001001 090038001002

PART NUMBER 308400002

* HEX NUT (M8)... 1 BAR CLAMP ASSEMBLY.. 1 GUIDE BAR ADJUSTMENT SCREW (M5 X 50 mm)... 1 * RETAINING RING (4 mm).. 1 GUIDE BAR PLATE.. 1 GUIDE BAR ADJUSTING PIN (M5).. 1 * E-RING (6 mm).. 2 CUPPED WASHER.. 1 SPROCKET.. 1. CHAIN (3/8,.043, 10).. 1 GUIDE BAR.. 1 BAR PAD PLATE.. 1 OIL PUMP SEAL ASSEMBLY.. 1 OIL PINION GEAR & PLUNGER.. 1 WORM GEAR.. 1 OIL PUMP HOUSING W/CAM PIN ASSEMBLY. 1 * SCREW (M5 X 13 mm).. 2 OIL CAP WITH RETAINER (PKG.). 1 * SCREW (M5 X 18 mm).. 4
OIL TANK COVER ASSEMBLY.. 1 OIL COVER GASKET... 1 * SCREW (M5 X 25 mm, SHOULDER SCREW). 3 * SCREW (M5 X 25 mm).. 1 * SCREW (M5 X 15 mm).. 1 * SPRING WASHER (M5). 1 PINION GEAR ASSEMBLY. 1 WAVY WASHER... 1 PICK-UP TUBE ASSEMBLY.. 1 OUTPUT SHAFT ASSEMBLY.. 1 GEAR CASE AND COVER ASSEMBLY. 1 EXPAND-IT LABEL.. 1 WARNING LABEL... 1 PRUNER BOOM ASSEMBLY (INCLUDES KEY. NOS. 31 AND 32). 1. INTERMEDIATE BOOM ASSEMBLY. 1 BLADE COVER.. 1 PRUNER GEAR HEAD (INCLUDES KEY. NOS. 1-9 AND 12-30). 1