NAV360-S

Specifications

Connectors

NAV240-S
Audio: Multi-pin Phoenix RS-232: Female DB-9 USB: Type B Power: Standard IEC Socket
The Sabine Navigator NAV360-S is a 3 x 6 input/output configuration system processor. The NAV360-S is equally at home in both touring and installation applications, where it provides loudspeaker management, matrix mixing, and signal routing. Stateof-the-art hardware and firmware guarantee superior sound quality and reliability. All firmware and software can be upgraded using Sabines Upgrade Wizard software, included on your Navigator CD or, available at www.sabine.com. Aside from the powerful array of features packed into a single unit (multible crossovers, complete signal routing and mixing, FBX filters, parametric filters, high and low shelf filters, delay, compression, and limiting), the Navigator also offers a choice of user interfaces. Computer control: When you install the included Navigator Remote Control Software you will see a very powerful yet simple user interface. All parameters and system status monitors are available without burying you in cryptic menus. From here you control all audio, security, linking, and file saving functions, and you can manage your entire network of Navigators. Blank Front Panel: For maximum security. Navigator blank front panel versions include Sabines new Automatic Mic Mixing function, with independent control of mic priority, attack, release, threshold, and gain on each channel. Combined with the FBX Feedback Exterminator the Navigator will provide more gain before feedback than conventional automatic mic mixers. NAVRC-100 Wall-Mount Remote Panel: The remote control panel allows for control of presets, gain, muting, and other basic functions. One NAVRC-100 can control up to 8 Navigators, and one Navigator can be controlled by up to 8 NAVRD-100 panels. Serial Remote Control Devices: Navigators are compatible with all the major serial controllers, including Crestron, AMX, and Cue. Audio Performance

General Power:115 /230 VAC (50 /60Hz); 20 watts Dimensions:19 x1.75 x 8 (483 x 44 x 203mm) Weight: 6.4 lbs /2.9 kg

Audio Control Parameters

Gain:-40 to +15dB in 0.25dB steps Polarity:+/Delay: 80 ms per I/0 Equalizers (8 per I/O) Type: Parametric, Hi-shelf, Lo-shelf EQ Gain: -30 to +15 dB in 0.25 steps Crossover Filters (2 Filters per Output) Filter Types: Butterworth, Bessel, Linkwitz Riley Slopes: 6 to 48dB/oct 8 independent digital FBX filters per input channel, controlled automatically from 20 Hz to 20 KHz Filter depth: 3 dB steps from 0 dB to -84 dB Maximum depth adjustable from -4 to -84 dB Filter width: user-controllable from 1.00 to.01 octave Resolution: 1 Hz from 20 Hz to 20 KHz Time required to find and eliminate feedback: typically 0.3 seconds @ 1 KHz Threshold: +20 dBu to -20 dBu Ratio: 1:1 through infinity Attack: 0.3 to 100ms Release:2 to 32X the attack time Gain: 30dB, fixed Phantom Power: +48V, either on or off for all inputs Differential Input Impedance: 2Kohm
FBX Feedback Exterminator

Compressor/Limiter

Microphone Preamp

AutoMix/Ducker

Freq Response:+/-0.1dB (20 to 20kHz) Dynamic Range:115dB typ (unweighted) CMMR:>60dB (50 to 10kHz) Crosstalk:<-80dB Distortion:0.002%(1kHz @+4dBu) Processor: 32-bit floating point Sampling Rate: 48kHz Analog Converters: High Performance 24-bit Propagation Delay: 1.8 ms Blank front panel for maximum security Input Impedance:>10k Ohms Output Impedance:50 Ohms Maximum Level:+18dBu Type: Electronically balanced
Digital Audio Performance
Up to 8 priority levels Max attenuation: 90 dB Threshold: 0 to -90 dB Attack time: 8ms to 504 mS Release time: 8ms to 504 mS Trigger signal detection minimum dwell time: 0 to 1054 mS Pre-release delay: 0 to 1054 mS Number of Programs:30 Preset Configurations: Generic, 2, 3, 4-Way, plus others Front Panel & Software Security Locks: Any individual menu, password protected Operating system firmware stored in Flash RAM. All future upgrades for firmware and software downloadable from www.sabine.com using Upgrade Wizard. Below approximately 200 Hz the feedback filters become slightly wider to increase the feedback and rumble capture speed at these low frequencies. Tests performed using an Audio Precision System One model 322 or equal.

Global Parameters

Front Panel Blank

Upgrades

Inputs and Outputs

Notes:

Specifications continued
NAVRC-100 Wall-Mounted Remote Control PanelNAVRC-100

Options:

NAV360-S-ER: Ethernet, Remote Control Ready NAV360-S-MER: Includes Mic Preamp, Ethernet and Remote Control Ready
Architects and Engineers Specifications: Dimensions: 4.58 wide x 4.58 high x 1.36 deep Minimum hole for mounting: 3.5 wide x 2.6 high Included in the box:
Fits in standard 2-gang wall box Power is supplied by the connected Navigator
Not included but required for installation:
Complete controller mounted on cover plate, ready to install Programming port and ribbon cable CAT5 Ethernet cable - run from Navigator to NAVRC-100 Standard 9-pin RS232 serial cable (for setup only) Standard 2-gang wall box and mounting screws PC computer with Navigator Wall Panel Setup software installed and RS232 serial connection (for setup only)

Connections: NAVRC-100

Connections: Programming Port
To PC: DB9 RS232 connector To NAVRC-100: Ribbon Connector
To Navigator: 2 RJ-45 connectors for CAT5 cable To Programming Port: Ribbon Connector
Maximum number of Wall Panels per Navigator: 32 Maximum number of Navigators per Wall Panel: 2 Maximum CAT5 cable length per Wall Panel/Navigator setup: Available Control Parameters, selectable for input or output:
Signal Mute Signal Level Signal Polarity Signal Delay EQ Frequency EQ Level Mixer Program Recall (global) 200 feet
Front Panel Controls: Menu, Value, Enter, Exit Back Panel Controls:
Dipswitches, for identifying each Wall Panel
The loudspeaker controller/matrix mixer/parametric equalizer/automatic feedback controller/compressor/limiter/ delay/crossover/signal router shall be a three input / six output digital signal processor, programmable with provided Windows software, Navigator Remote, including linkable functions and remote programming. The unit shall automatically sense feedback and determine its pitch, then assign a digital notch filter to the resonating frequency to automatically eliminate the feedback. It shall effectively distinguish between music and feedback and shall be operational during the program. The product shall use five types of user-selectable filters: parametric, high-shelf, low shelf, fixed FBX or dynamic FBX. The user controls the parametric and shelving filters; the fixed FBX filters, controlled automatically, remain set on the initial feedback frequencies, and the dynamic FBX filters shall be automatically reassigned new frequencies as feedback occurs during the program. The NAV360-S shall also function as a eight-band parametric equalizer, full-featured compressor/limiter, multi-setting crossover, and digital delay for speaker alignment. The unit shall include a blank front panel for maximum security. The unit shall be provided with a front panel USB connector and a back panel RS232. The back panel will have MultiPin Phoenix connectors for each input and output; power connector with bulti-in fuse holder. The following performance criteria shall be met: FBX/PARAMETRIC FILTERS Eight independent digital notch filters controlled automatically or parametrically from 20 Hz to 20 kHz, each switchable between FBX fixed filters, FBX dynamic filters, shelving filters, and parametric filters. High and low shelf filters: user-controllable cutoff points between 20 Hz and 20 kHz, and 6 or 12 dB/octave rolloff. parametric filter depth: user-controllable in 3 dB steps from 0 dB to -84 dB (parametric mode), 3 dB steps from 0 dB to -40 dB (FBX mode), maximum automatic depth adjustable from -4 to -84 dB. Filter width: user-controllable from 1.00 octave to.01 octave (parametric), 1.0 to.02 oct. (FBX); constant Q (filter skirts do not widen as filters get deeper). Resolution: 1 Hz from 20 Hz to 20 kHz in FBX and parametric mode. Time required to find and eliminate feedback: user-controllable from 0.1 seconds to 5 seconds (typically 0.3 seconds). Total number of combined filters active: user selectable, 0-8 per output and 0-8 per input. Filters controllable via table or graphic interface. The unit shall be the Sabine NAV360-S Navigator System Processor.

(SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE) *Below approximately 200 Hz the feedback filters become slightly wider to increase the feedback and rumble capture speed at these low frequencies. **ND Series Receivers Only ***Company names, product names, and trademarks listed here are the property of their respective owners and are used only to identify evaluated microphones used to develop digital processing; they in no way imply association, endorsement, or approval by any named manufacturer.

ARCHITECTS and ENGINEERS SPECIFICATION
NAVIGATOR NAV360-S System Processor
The loudspeaker controller/matrix mixer/parametric equalizer/automatic feedback controller/compressor/limiter/ delay/crossover/signal router shall be a three input / six output digital signal processor, programmable with the provided Windows software, the Navigator Remote, including linkable functions and remote programming. The unit shall automatically sense feedback and determine its pitch, then assign a digital notch filter to the resonating frequency to automatically eliminate the feedback. It shall effectively distinguish between music and feedback and shall be operational during the program. The product shall use five types of user-selectable filters: parametric, high-shelf, low shelf, fixed FBX or dynamic FBX. The user controls the parametric and shelving filters; the fixed FBX filters, controlled automatically, remain set on the initial feedback frequencies, and the dynamic FBX filters shall be automatically reassigned new frequencies as feedback occurs during the program. The NAV360 shall also function as a eight-band parametric equalizer, fullfeatured compressor/limiter, multi-setting crossover, and digital delay for speaker alignment. The back panel will have 3-pin XLR connectors for each input and output; power connector with bulti-in fuse holder. The following performance criteria shall be met: FBX/PARAMETRIC FILTERS Eight independent digital notch filters controlled automatically or parametrically from 20 Hz to 20 kHz, each switchable between FBX fixed filters, FBX dynamic filters, shelving filters, and parametric filters4. High and low shelf filters: user-controllable cutoff points between 20 Hz and 20 kHz, and 6 or 12 dB/octave roll-off. parametric filter depth: user-controllable in 1 dB steps from +15 dB to -30 dB (parametric mode), 3 dB steps from 0 dB to -40 dB (FBX mode), maximum automatic depth adjustable from -6 to -40 dB. Filter width: user-controllable from 2.50 octave to.02 octave (parametric), 1.0 to.02 oct. (FBX1); constant Q (filter skirts do not widen as filters get deeper). Resolution: 1 Hz from 20 Hz to 20 kHz in FBX and parametric mode. Time required to find and eliminate feedback: user-controllable from 0.1 seconds to 5 seconds (typically 0.3 seconds). Total number of combined filters active: user selectable, 0-8 per output and 0-8 per input. Filters controllable via table or graphic interface. CROSSOVER: Two filters per output; Bessel, Linkwitz-Reily, or Butterworth filters; 12, 24, 36, 48 dB/ octave slopes. Multiple presets and graphic editing. COMPRESSOR/LIMITER Threshold: +20dBu to -20dBu in 0.5 dB steps (independently adjustable for compressor & limiter). Ratio: 1:1 through infinity. Knee: soft to hard, in 40 steps. Attack: 0.3 to 99 mSec in 1 mSec steps. Release:.05 to 100 msec. in.05 sec steps. Peak limits: -20 dBu to 32 dBu in.05 dB steps. DIGITAL DELAY 1.47 mSec to 650 mSec in 20 microsecond steps. Edit in milliseconds, feet, or meters. MIXER/ROUTER All inputs patchable to all outputs; mixer with levels levels for all inputs/outputs PASSWORD CONFIGURATION 4 levels SAVE & RECALL CONFIGURATIONS 30 user defined, 1 factory default, 1 most recent front panel configuration (power down save). INPUT/OUTPUT Input impedance: balanced 10K Ohms, PIN 2 high. Output impedance: balanced 50 Ohms nominal, PIN 2 high. Input/output maximum signal levels: balanced +20 dBu peak. Output load: 600 Ohms balanced. Bypass: true power-off bypass. PERFORMANCE Frequency response: 20 Hz to 20 kHz, 0.1 dB @+20 dBu. Dynamic range: >115 dB. Digital resolution: 24-bit, 48 KHz. POWER 50/60 Hz; 120V or 230V; 18W. DIMENSIONS 1-U rack mount; 19 x 1.75 x 8 (483 x 44 x 203 mm); Weight: 13.2 lb. (6 kg). The unit shall be the Sabine NAV360-S Navigator System Processor.

Options: NAV360-S-R: Ready for connection via CAT-5 cable to NAVRC100 Wall-mounted Remote Control; NAV360S-M: Includes Mic Preamp; NAV360-S-MR: Includes Mic Preamp and Remote Control.

2008 Sabine, Inc

Sabine, Inc. 13301 NW US Highway 441 Alachua, FL 32615-8544 (386) 418-2000 Fax: (386) 418-2001 Sabine.com
2008 Pro Audio Binder-Arch-Specs-080218.indd - ks