Primea Cappuccino - Primea Ring (Technology and Features )
SBS - Saeco Brewing System One twist. Infinite types of coffee. An absolutely revolutionary innovation. Saeco's new patented international exclusive: SBS (Saeco Brewing System) is the avant -garde technology which has changed the world of coffee machines. This ingenious system allows you to make an infinite variety of coffee beverages from just one fully automatic machine and at the mere twist of a knob. Whether it is an intense Italian ristretto (turn the knob to the right) or an American-style long coffee (turn the knob to the left) SBS satisfies all tastes, giving a full flavour and a truly unique creamy layer. In addition, the coffee dose in the extraction chamber is fully manipulated, thanks to the pressure, which remains constant throughout the extraction cycle. Through this process, all of the aro ma is concentrated in the cup, offering you a superb crema finish and a truly rich flavour.
Rapid Steam Rapid Steam technology reduces the normal waiting tim e between coffee brewing and steam output to just a few seconds, so you can froth milk to make cappuccinos, lattes, and macchiato coffee at the simple turn of the steam knob.
Click Wheel Interface The easy-to-use click wheel interface allows you to scroll through and select each menu option on the display with just a slight touch of the click wheel.
Ceramic Grinder For perfect-tasting coffee every time. The ceramic grinder is Saeco's most rece nt innovation, available in all new models of the Saeco range of automatic coffee machines. After careful research, Saeco finally chose this material to put an end to grinding with metal components. Ceramic is inert, and thus ensures the best results witho ut altering the flavour of the coffee. Moreover, it is perfectly safe to use. The new ceramic grinder also provides a more consistent grind, allowing perfect dosing and blending, and giving you more control over the density and body of your coffee. And tha t's not all - the amount of coffee residue left in the cup is substantially reduced. Long -lasting, minimum noise! Thanks to its sturdy build, the ceramic coffee grinder will quietly grind to the same consistency and high standards for a longer period of time.
Touch Lift The drip tray can be easily raised or lowered manually or electrically with a simple touch, allowing for different cup sizes. Espresso cups or glasses can easily be accommodated.
Touch2Cappuccino Touch2Cappuccino is a patented revo lutionary Saeco technology, which allows you to prepare 2 cappuccinos or 2 latte macchiatos simultaneously. The Touch2Cappuccino system consists of a milk container placed directly inside the machine. The milk is drawn from this container, frothed interna lly, and then dispensed into the cup.
Nanotechnology Nanotechnology substantially facilitates the cleaning process. The pr oven properties of nanotechnology guarantee that all components in contact with milk are perfectly clean.
Aqua Prima Water Filter The Aqua Prima water filter was developed to remove impurities from your water that alter the taste of your coffee. The AquaPrima water filters purpose is to improve the taste of your coffee while protecting your machine from lime scale damage.
Image used only as an example.

Operation and maintenance manual
Before using the machine, please read the attached operating instructions. Carefully read the safety rules

FOR HOUSEHOLD USE ONLY

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid. 4. Close supervision is necessary when the appliance is used by or near children. 5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment. 7. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons. 8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter, or touch hot surfaces. 10. Do not place on or near a hot gas or electric burner, or in a heated oven. 11. Always attach plug to appliance first, then plug cord into wall outlet. To disconnect, turn any control to off, then remove plug from wall outlet. 12. Do not use appliance for other than intended use. 13. Save these instructions.

SAVE THESE INSTRUCTIONS

CAUTION
This appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service centre. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the machine serviceable by the user. Repair should be done by authorized service personnel only. 1 Check voltage to be sure that the voltage indicated on the nameplate corresponds with your voltage. 2 Never use warm or hot water to fill the water tank. Use cold water only. 3 Keep your hands and the cord away from hot parts of the appliance during operation. 4 Never clean with scrubbing powders or harsh cleaners. Simply use a soft cloth dampened with water. 5 For optimal taste of your coffee, use purified or bottled water. Periodic descaling is still recommended every 2-3 months. 6 Do not use caramelized coffee
INSTRUCTIONS FOR THE POWER SUPPLY CORD
A. A short power-supply cord (or detachable power-supply cord) is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. B. Longer detachable power-supply cords or extension cords are available and may used if care is exercised in their use. C. If a long detachable power-supply cord or extension cord is used, 1. The marker electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance 2. If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord, and 3. The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.
WARNING....2 APPLIANCE....4

ACCESSORIES.....4

INSTALLATION....5
STARTING THE MACHINE.....5 SETTING THE LANGUAGE.....6 INTENZA WATER FILTER....7

DISPLAY.....8

COFFEE AROMA.....8

ADJUSTMENTS....9

COFFEE INTENSITIY....9 ADJUSTING THE HEIGHT OF THE DRIP TRAY....9 FILLING THE MILK CONTAINER....9
BEVERAGE DISPENSING....10
ESPRESSO / COFFEE / LONG COFFEE....10 DISPENSING BEVERAGES WITH GROUND COFFEE....11 LATTE MACCHIATO.....12 ESPRESSO MACCHIATO.....14 CAPPUCCINO....14 DISPENSING HOT MILK.....15 HOT WATER DISPENSING.....15
BEVERAGE PROGRAMMING....16
1. PROGRAMMING FOR SELF-INSTRUCTING....16 2. PROGRAMMING FROM THE BEVERAGE SETTINGS MENU...16
PROGRAMMING THE MACHINE....18
MACHINE SETTINGS.....19 LANGUAGE MENU.....19 CUP WARMER MENU....20 WATER FILTER MENU.....20 RINSE MENU.....21 WATER HARDNESS MENU - INTENZA AROMA SYSTEM....21 ACOUSTIC ALARM MENU.....22 MAINTENANCE MENU....23 MILK CIRCUIT RINSE CYCLE....23 COFFEE WASH CYCLE.....24 MILK WASH CYCLE.....25 DESCALING CYCLE....28 CLOCK SETTINGS....30 TIME SETTING.....30 DATE SETTING.....31 TIME FORMAT.....31 STANDBY SETTING.....32 ENERGY SAVING....32 TIMER SETTING.....32 SPECIAL FUNCTIONS.....34 DELETING ALL THE SETTINGS....34 COFFEE IN THE WORLD....35 BEVERAGE COUNTERS.....36
CLEANING AND MAINTENANCE....37
MAINTENANCE DURING OPERATION....37 GENERAL MACHINE CLEANING.....37 MILK CONTAINER MAINTENANCE AND CLEANING....38 CLEANING THE BREW GROUP.....40 GRINDER MAINTENANCE....41
ERROR CODES.....42 SAFETY RULES....43 TECHNICAL DATA....45

GENERAL INFORMATION

The coffee machine is intended for preparing espresso by using either coffee beans or ground coffee. It includes an automatic device for preparing milk beverages and a hot water dispenser. The machine is elegantly designed for domestic use and is not suitable for continuous heavy duty or professional use. Warning: no liability is assumed for any damage caused by: Incorrect use not in accordance with the intended uses; Repairs not carried out by authorized customer service centers; Tampering with the power cord; Tampering with any part of the machine; The use of non-original spare parts and accessories; Failure to descale the machine or use at temperatures below 0C.

HARDNESS MENU ON PAGE 21.

SETTING THE LANGUAGE

When the machine is switched-on for the rst time, it requires the selection of the desired language. This allows you to adjust the parameters of the beverages to the typical parameters of the country where the machine is used. This is why some languages are differentiated also by country.

english language

water filter inserted yes
Select the language by navigating the click wheel with your nger.
When the desired language is displayed, press. The machine now displays the messages in the selected language.
The machine displays the following menu. Wait before making the selection.
In this phase you must decide whether to install the water lter. Its use is recommended by Saeco. The water lter puries water and allows you to taste the full aroma of coffee. If you want to install the water lter, go to page 7.

water filter inserted no

press ok boiler filling
1. 2. Otherwise, select and press. Press to prime the circuit; wait until the machine stops.

warming up please wait

rinsing please wait
strong aroma espresso coffee 08:33
When the priming is completed, wait until the machine has nished the heating phase.
Once the heating phase is completed, a small quantity of water is dispensed. Wait for this cycle to be completed automatically. Refer to page 21 to enable/disable the function.
The screen for product dispensing appears on the display.

INTENZA WATER FILTER

To improve the quality of the water you use, and extend the life of your machine at the same time, it is recommended that you install the water lter. After installation, go to the water lter initialization program (see programming). In this way, the machine informs the user when the water lter must be replaced. Remove the water lter from its packaging, immerse it vertically (with the opening facing upwards) in cold water and gently press its sides so as to let the air bubbles out.
Remove the small white lter from the tank and store it in a dry place sheltered from dust.
Set the Intenza Aroma System: A = Light water B = Medium water (standard) C = Hard water For further details see page 21

Insert the lter in its place within the empty tank (see gure); Press down until it clicks into place.
Fill the tank with fresh drinking water and reinsert it into the machine.
Place a container under the spout.

push ok initialisation

in progress initialisation

done initialisation

again.
The machine initialises the lter.
Then, press repeatedly. When the exit message is displayed, press. In this way, the machine ends the start-up phase. Wait until at the end of the procedure, the display shows what is shown on page 8. NOTE: if the Intenza water lter is not available, insert the small white lter previously removed (see point 1) into the tank.

DISPLAY

Enter the programming menu
Select dispensing of beverages with milk

Click wheel

Conrmation key
Select the coffee bean dose or the quantity of preground coffee
Hot water brewing selection key

Press the complete.

key twice to make 2 cups. This operation can be performed until the grinding is Press twice
strong aroma double espresso 08:33
To brew 2 cups, the machine dispenses half of the entered quantity and briey interrupts dispensing in order to grind the second serving of coffee. Coffee dispensing is then restarted and completed. If a milk beverage has been chosen, the machine automatically manages milk dispensing.

COFFEE AROMA

By pressing the key, there are three possible selections (strong, medium, mild) that indicate the aroma (coffee quantity to be ground by the machine) for the beverage selected. This key enables you to select also the ground coffee function.
strong aroma espresso coffee 08:33 medium aroma espresso coffee 08:33 mild aroma espresso coffee pre-ground espresso coffee 08:33 08:33
SELECT THE DESIRED AROMA BEFORE DISPENSING THE BEVERAGE.

ADJUSTMENTS

COFFEE INTENSITIY
The SBS system has been carefully designed to give your coffee the intense taste you desire. Simply turn the dial and you will notice that the coffee goes from mild intensity to strong intensity.

SBS SAECO BREWING SYSTEM

SBS adjusts the intensity of the brewed coffee, and can even be adjusted while brewing. Any adjustment has an immediate effect on the brewing coffee.

MEDIUM COFFEE

MILD COFFEE

STRONG S COFFEE C

ADJUSTING THE HEIGHT OF THE DRIP TRAY
Adjust the drip tray before dispensing any beverages. Height-adjustable drip tray. To raise the drip tray, press lightly on the lower part of the button. To lower the tray, press lightly on the upper part of the button; when the desired height is reached, release the button. Note: there is a red oater in the drip tray. When it rises, the tray must be emptied and washed.
FILLING THE MILK CONTAINER
The container with the cappuccinatore must be lled before preparing any milk beverage. Do not use milk after the best-before date. (Important! Refer to the instructions for maintenance and cleaning of the cappuccinatore on page 38).
Open the milk compartment by pressing the button and remove the milk container.
Remove the cover and pour in the milk. DO NOT EXCEED THE MAXIMUM LEVEL shown in the gure.
Replace the lid on the container and place it back in the milk compartment. Make sure to carefully close the compartment.

BEVERAGE DISPENSING

THE DISPENSING OF COFFEE, HOT WATER AND MILK MAY BE STOPPED AT ANY TIME BY PRESSING THE KEY AGAIN. THE DISPENSED MILK MAY BE VERY HOT: DANGER OF SCALDING. AVOID TOUCHING IT DIRECTLY WITH YOUR HANDS. THE USED MILK HAS TO BE PROPERLY PRESERVED. DO NOT USE IT AFTER THE BEST-BEFORE DATE SHOWN ON THE PACK AGE.
Check that all the containers are clean. To do this operation, follow the instructions in the Cleaning and Maintenance chapter (see page 37)
WHEN YOU HAVE FINISHED PREPARING BEVERAGES CONTAINING MILK, PROCEED BY CLEANING THE CONTAINER AND THE MACHINES CIRCUIT.
To brew 2 cups, the machine dispenses half of the entered quantity and briey interrupts dispensing in order to grind the second serving of coffee. Coffee dispensing is then restarted and completed. If a milk beverage has been chosen, the machine automatically manages milk dispensing.

ESPRESSO / COFFEE / LONG COFFEE
This procedure shows how to dispense an espresso. To dispense another type of coffee, select it by sliding the click wheel with a nger. Use appropriate espresso or coffee cups so that the coffee will not overow.
brewing in progress espresso coffee
Select the desired beverage by navigating the click wheel with your nger.
Select the coffee aroma by pressing the key one or more times.
Press the key once for 1 cup and twice for 2 cups. The selected beverage will be brewed.
The machine ends dispensing automatically according to the quantity determined by the manufacturer. It is possible to customize this quantity. See page 16.
DISPENSING BEVERAGES WITH GROUND COFFEE
Pre-ground coffee must be poured into the appropriate compartment positioned next to the coffee bean hopper. Pour in only coffee ground for espresso machines and never coffee beans or instant coffee. (see the Beverage programming chapter on page 16). WARNING: PUT PRE-GROUND COFFEE IN THE COMPARTMENT ONLY WHEN YOU WISH TO DISPENSE THIS TYPE OF BEVERAGE. INSERT ONLY ONE SCOOP OF GROUND COFFEE AT A TIME. TWO CUPS OF COFFEE CANNOT BE DISPENSED AT THE SAME TIME. In the example given below, we chose to dispense an espresso using pre-ground coffee. The customized choice of using pre-ground coffee is shown on the display.
pre-ground espresso coffee 08:33
add pre-ground coffee espresso coffee
2. 1. Select the desired beverage by navigating the click wheel with your nger. Select the function by pressing the key one or more times. Press the key. A message appears, reminding the user to pour ground coffee in the appropriate compartment.
Pour ground coffee in the appropriate compartment using the measuring scoop provided in the accessories.

Press the brewing.

key to start
Note: After 1 minute from when the message appears (2), if brewing has not started the machine will return to the main menu and dump any inserted coffee into the coffee grounds drawer If no pre-ground coffee is poured into the compartment, only water will be dispensed If 2 or more scoops of coffee are added, the machine will not dispense the beverage and the coffee in the compartment will be dumped into the coffee grounds drawer.

LATTE MACCHIATO

SEE INSTRUCTIONS ON PAGE 38 FOR OPTIMAL MILK DISPENSING Fill the milk container
strong aroma latte macchiato 08:33

Press the

Select latte macchiato by navigating the click wheel with your nger.
Select the aroma by pressing the key one or more times.
brewing in progress latte macchiato
add milk? latte macchiato
rinsing milk circuit latte macchiato 08:33
Press the key once for 1 cup and twice for 2 cups. The latte macchiato will be brewed.

After this, the machine allows you to dispense more milk if you wish. This option remains active for approx. 3 seconds. To activate it, press the button. Once the desired quantity has been reached, press the button again to stop dispensing.
The machine will propose cleaning the milk circuits. Press the key to clean the internal circuits.
If the user wishes to continue preparing other drinks the machine will keep the rinsing milk circuit signal active. After 20 minutes of inactivity, the machine requires the user to perform a rinsing cycle as described in Step 7. If the machine is turned off immediately after dispensing a milk beverage, the next time the machine is turned on it will require the user to perform a rinsing cycle. Note: Before performing the milk rinsing circuit function make sure that: 1. a large enough container is positioned under the dispensing spout; 2. the water tank contains a sufcient quantity of water.
milk circuit washing espresso coffee 08:33
After 14 days from the rst dispensing of a milk-based beverage, the message milk circuit washing is displayed; it is advisable to clean the milk circuits as shown on page 25. After another 7 days the machine stops dispensing milk-based beverage only and the milk circuits must be washed; during this phase, coffee and hot water may be dispensed.

rinsing milk circuit

in progress milk circ. rinse cycle

Press cycle.

to perform the rinse
In this phase the user cannot intervene and must wait until the cycle nishes. After this, the machine returns to the main menu.
Remove the container, rinse and dry.
THIS PROCEDURE MUST BE PERFORMED FOR ALL MILK BEVERAGES! AFTER USE, ALWAYS REMOVE THE MILK CONTAINER AND PUT IT IN THE REFRIGERATOR IF IT CONTAINS REMAINING MILK.
remove milk espresso coffee 08:33
After performing the rinse cycle, the machine reminds the user to remove the container with the remaining milk through the message remove milk.
REMOVE THE MILK CONTAINER ONLY WHEN THE MACHINE IS ON.
THE CONTAINER MAY BE LEFT IN THE MACHINE ONLY IF IT HAS BEEN WASHED WITH DRINKING WATER AND IT DOES NOT CONTAIN MILK (SEE PAGE 38).

ESPRESSO MACCHIATO

Fill the milk container
strong aroma espresso macchiato 08:33
Select espresso macchiato by navigating the click wheel with your nger.
add milk? espresso macchiato
When the milk circuit rinsing symbol ashes, rinse the milk circuits as described for the latte macchiato (see page 12, step 6).
key once or twice Press the to start brewing.
If you wish, press the button. Once the desired milk quantity has been reached, press the button again.

CAPPUCCINO

strong aroma cappuccino 08:33
Select cappuccino by navigating the click wheel with your nger.
brewing in progress cappuccino

add milk? cappuccino

If you wish, press the button. Once the desired milk quantity has been reached, press the button again. Fill the milk container

DISPENSING HOT MILK

hot milk 08:33

add milk? hot milk

1. 2. Press the key. Select the hot milk and press the key. If you wish, press the button. Once the desired milk quantity has been reached, press the button again.
Repeat the operation to brew another cup of milk. When the rinsing milk circuit symbol ashes, rinse the milk circuits as described for the latte macchiato (see page 12, step 6).

HOT WATER DISPENSING

AT THE START, SHORT SPURTS OF HOT WATER MAY BE DISPENSED WHICH POSE A RISK OF SCALDING. THE HOT WATER SPOUT CAN REACH HIGH TEMPERATURES: DO NOT TOUCH IT WITH BARE HANDS.

hot water 08:33

brewing in progress hot water
The machine brews the preset water quantity. Press the key after brewing, to exit the Hot water function.

Press the key brewing.

to start

BEVERAGE PROGRAMMING

Every beverage can be programmed according to your own tastes.
1. PROGRAMMING FOR SELF-INSTRUCTING
For all beverages you can quickly program the quantity of coffee and/or milk dispensed in the cups whenever the key is pressed. Select the type of beverage you want to program, then press and hold the key until the display shows (for example): self-instruction active

espresso coffee

The machine dispenses coffee or milk. When the desired amount is reached, press the The display will show: new quantity saved

key again.

rinsing milk cleaning cycle
Rinse the container and ll it with fresh water.
Insert the container and press.
When the rinse cycle is nished the following appears
Perform another rinse cycle as shown previously. At the end, press the key.
> machine settings > maintenance > descaling cycle

Descaling cycle

To perform the automatic descaling cycle. Descaling is necessary every 2-3 months, depending on the volume of use and hardness of the local water supply.The machine must be turned on and will automatically manage the distribution of the descaling agent. A PERSON MUST BE PRESENT DURING THE OPERATION. WARNING! NEVER USE VINEGAR AS A DESCALER. Saeco descaler is recommended, however you can use a non-toxic and/or non-harmful descaling product for coffee machines, commonly available online or in coffeeshops. The solution used must be disposed of according to the manufacturers instructions and/or according to regulations in force in the country of use. Note: Before beginning the descaling cycle make sure that: 1. a container of adequate dimensions is positioned under the water spout and dispensing head; 2. THE WATER FILTER HAS BEEN REMOVED. 3. The water tank has been lled with the descaling solution up to the level indicated with. Pause descaling. The descaling and/or rinsing can be paused and then restarted. When descaling is interrupted the machine will warn the user that it must be turned off. WARNING! DESCALING MUST BE COMPLETED WITHIN 24 HOURS FROM ITS INTERRUPTION. The next time the machine is turned on, the machine will warn the user that the descaling and/or rinse process must be completed.
descale espresso coffee 200 08:33

descale

The machine will indicate the need to perform a descaling cycle through a ashing message. This message is displayed 200 beverages before descaling must be performed. Each time a beverage is dispensed, the machine will count down the number of remaining beverages, which will be displayed on the right. When 30 beverages remain, the display will begin to ash.
When the remaining beverages are nished, the machine will block and must be descaled. Run the descaling cycle as described on page 28.
To perform descaling before the machine blocks, or before the descaling message appears:

yes descaling cycle

Insert the descaler and press the key to begin.
When the solution is nished the following message appears on the display:
descaling descaling cycle
fill water tank descaling cycle
insert tank descaling cycle
The machine begins to dispense the descaling solution through the hot water spout. The dispensing occurs at preestablished intervals, in order to allow the solution to be more effective.

> machine settings > stand-by setting

STANDBY SETTING

In this menu you can:
stand-by setting energy saving stand-by setting timer setting
set the energy saving mode (time that must elapse from the last beverage made before the machine switches to energy saving mode).
set the timers (activation of on/off times setting one on/off time a day)

Energy saving

> machine settings > stand-by setting > energy saving By default, the off delay is set to 3 hours.
stand-by setting energy saving
after 3 hours energy saving
3 Select by navigating the click wheel with your nger. It is possible to set: - after 15 minuters - after 30 minuters - after 1 hour - after 3 hours Press the button to save.

Timer setting

> machine settings > stand-by setting > timer setting The timers can operate only if activated by the timer activation function. If this is not the case, the timers will have no effect on the machine.

1. Activating the timers

timer setting timer activation

no timer activation

You can set: - yes (the machine turns on and off at the times set) - no (the machine ignores the times set) Press the button to save.
2. Setting an interval for turning on the machine
You can set an on/off time for each day of the week (in this case, the procedure for setting an interval for Monday is displayed).
stand-by setting timer setting

timer setting monday

monday switch on
08h (am) + switch on monday
00 min + switch on monday
1. 2. Set the turn on time by navigating the click wheel with your nger.
1. 2. Set the turn on minute by navigating the click wheel with your nger.

monday switch off

09h (am) + switch off monday
00 min + switch off monday
1. 2. Set the turn off time by navigating the click wheel with your nger.
1. 2. Set the turn off minute by navigating the click wheel with your nger.
You can set the on/off times for all the days of the week.
Press to exit the programming of the selected day.
Navigate the click wheel with your nger to select the other days you want to program.

SPECIAL FUNCTIONS

This menu allows you to access special functions present on the machine. To access, press the key and select special functions. Turn the click wheel with a nger to:
special functions cancel settings special functions coffee of the world
restore the factory settings.
special function product counters
prepare coffee according to the most famous recipes in the world.
Display how many beverage have been prepared for each single type of beverage.

DELETING ALL THE SETTINGS
> special funtions > cancel settings The function for restoring all the factory settings is contained in this menu. This function is particularly important for restoring the base parameters. ALL THE CUSTOM SETTINGS WILL BE LOST AND CANNOT BE RECOVERED. AFTER RESTORING FACTORY SETTINGS, YOU MUST, IF DESIRED, REPROGRAM ALL THE MACHINES FUNCTIONS.
special functions cancel settings

yes cancel settings

1. 2. If yes is selected, a subsequent conrmation is requested to be sure that you want to perform the reset.
are you sure? cancel settings
all factory settings have been restored

key to reset.

The display shows for 2 seconds the parameter reset conrmation.

COFFEE IN THE WORLD

> special funtions > coffee of the world This function enables the user to:
coffee of the world ristretto
coffee of the world espresso italiano

coffee of the world caf

prepare true ristretto allitaliana
coffee of the world caf crme
prepare a typical Italian espresso
coffee of the world american coffee
prepare a typical North European coffee
coffee of the world good morning coffee
prepare a typical French/ Swiss coffee
coffee of the world good night milk
prepare a typical American coffee
prepare a coffee for a day full of energy
prepare a avourful latte macchiato without the fear of not being able to sleep
If for example, you want to taste a typical American coffee, you must select American coffee.
special functions coffee of the world

yes american coffee

1. 2. Select the desired beverage.
1. 2. Conrm the selection.
sbs position: crme american coffee
brewing in progress american coffee
Set the SBS to the position shown (see page 9). Press to start.

The dispensing starts.

At the end, the machine returns to the main screen.

BEVERAGE COUNTERS

> special funtions > product counters This function shows how many beverages have been prepared for every single type of beverage.

23 espresso coffee

1. 2. You may display the data of every single type of beverage by navigating the click wheel with your nger.

to exit.

CLEANING AND MAINTENANCE
MAINTENANCE DURING OPERATION
During normal operation, the empty grounds drawer message may appear. This operation must be performed when the machine is on.
If you remove grounds with the machine off or when not signaled on the display, the count of the grounds emptied into the drawer is not reset. For this reason the machine might display the empty grounds drawer message even after preparing just a few coffees. Remove the grounds drawer and empty and wash it.

GENERAL MACHINE CLEANING

The cleaning described below must be performed once a week. Note: if water remains for several days in the tank, do not reuse it. WARNING! Do not immerse the machine in water. Clean the cappuccinatore as shown in the corresponding section on page 38.
Switch off the machine and unplug it.
Clean the tank and the cover.
Remove the drip tray, empty and wash it
Clean the pre-ground coffee compartment with a dry cloth. Clean the display.
Clean the cappuccinatore as shown in the corresponding section on page 38.
MILK CONTAINER MAINTENANCE AND CLEANING
The milk container and the cappuccinatore have been designed to optimize the milk froth. Thorough cleaning and maintenance of the milk container and cappuccinatore will allow you to savour excellent milk-based beverages. It is recommended to rinse the cappuccinatore before the rst daily dispensing of milk-based products and however to wash it thoroughly at least once a week.
QUICK MAINTENANCE OF THE CAPPUCCINATORE
If you notice a reduction in the milk froth, simply turn the ow regulator as shown in the gure. Turn the regulator 2-3 times to perform quick maintenance. Note: if the adjusting device installed is missing, replace it with the adjusting device supplied with the cappuccinatore maintenance kit.
WASHING TO STORE THE CONTAINER IN THE MACHINE.
After using milk to prepare beverages, the container may be stored in the machine only if it has been washed with fresh drinking water. These few simple steps guarantee that the machine will operate properly.
Pour any extra milk into a container.
Rinse all the parts in contact with milk with lukewarm water.
Dry and replace the milk container into the compartment.
MAINTENANCE OF O-RING FOR MILK CONTAINER
In the machine there is an O-ring which guarantees the correct operation of the milk container. Every 6 months, remove the water tank, open the milk container and lubricate the O-ring using the grease supplied with the machine. The grease for the Brew Groups lubrication may be purchased in authorized service centres.
THOROUGH MAINTENANCE OF THE CAPPUCCINATORE
Thoroughly wash the cappuccinatore at least once a week. The components should be hand-washed with household detergents.

Safety of household and electrical appliances - General requirements EN 60335-1(2002) + A1(2004) + A2(2006) + A11(2004) + A12(2006) Safety of household and electrical appliances - Part 2-15 Particular requirements for appliances for heating liquids EN 60335-2-15(2002) + A1(2005) Household and similar electrical appliances - Electromagnetic elds - methods for evaluation and measurement EN 50366 (2003) + A1 (2006). Household and similar electrical appliances - safety - Part 2-14 Particular requirements for kitchen machines EN 60335-2-14 (2006). Electromagnetic compatibility (EMC) - Requirements for household appliances , electric tools and similar apparatus - Part 1 Emission EN 55014-1 (2000) + A1 (2001) + A2 (2002). Electromagnetic compatibility (EMC) Part. 3^ Limits - Section 2 : Limits for harmonic current emissions (equipment input current 16A for phase) - EN 61000-3-2 (2000) Electromagnetic compatibility (EMC) Part 3^ : Limits - Section 3 : Limitation of voltage changes , voltage uctuations and icker in public low - voltage supply systems , for equipment with rated current 16 A for phase and not subject to conditional connection EN 61000-3-3 (1995) + A1 (2001) Electromagnetic compatibility - Requirements for household appliances , electric tools and similar apparatus - Part 2. Immunity - Product family standard EN 55014-2 (1997) + A1 (2001)
Following the provision of the directives: EC 73/23, EC 89/336, EC 92/31, EC 93/68

R & D Manager

Gaggio Montano - li, 27/06/2007 Mr. Andrea Castellani
Saeco International Group S.p.A. Via Torretta, 240 I-40041 Gaggio Montano, Bologna Tel: + 771111 Fax: + 31025 www.saeco.com
The manufacturer reserves the right to change the features of the product without prior notice.
Saeco International Group S.p.A.

Type SUP030ND

Cod.15001343 Rev.00 del 15-09-07