Primea Cappuccino - Primea Ring (Technology and Features )
SBS - Saeco Brewing System One twist. Infinite types of coffee. An absolutely revolutionary innovation. Saeco's new patented international exclusive: SBS (Saeco Brewing System) is the avant -garde technology which has changed the world of coffee machines. This ingenious system allows you to make an infinite variety of coffee beverages from just one fully automatic machine and at the mere twist of a knob. Whether it is an intense Italian ristretto (turn the knob to the right) or an American-style long coffee (turn the knob to the left) SBS satisfies all tastes, giving a full flavour and a truly unique creamy layer. In addition, the coffee dose in the extraction chamber is fully manipulated, thanks to the pressure, which remains constant throughout the extraction cycle. Through this process, all of the aro ma is concentrated in the cup, offering you a superb crema finish and a truly rich flavour.
Rapid Steam Rapid Steam technology reduces the normal waiting tim e between coffee brewing and steam output to just a few seconds, so you can froth milk to make cappuccinos, lattes, and macchiato coffee at the simple turn of the steam knob.
Click Wheel Interface The easy-to-use click wheel interface allows you to scroll through and select each menu option on the display with just a slight touch of the click wheel.
Ceramic Grinder For perfect-tasting coffee every time. The ceramic grinder is Saeco's most rece nt innovation, available in all new models of the Saeco range of automatic coffee machines. After careful research, Saeco finally chose this material to put an end to grinding with metal components. Ceramic is inert, and thus ensures the best results witho ut altering the flavour of the coffee. Moreover, it is perfectly safe to use. The new ceramic grinder also provides a more consistent grind, allowing perfect dosing and blending, and giving you more control over the density and body of your coffee. And tha t's not all - the amount of coffee residue left in the cup is substantially reduced. Long -lasting, minimum noise! Thanks to its sturdy build, the ceramic coffee grinder will quietly grind to the same consistency and high standards for a longer period of time.
Touch Lift The drip tray can be easily raised or lowered manually or electrically with a simple touch, allowing for different cup sizes. Espresso cups or glasses can easily be accommodated.
Touch2Cappuccino Touch2Cappuccino is a patented revo lutionary Saeco technology, which allows you to prepare 2 cappuccinos or 2 latte macchiatos simultaneously. The Touch2Cappuccino system consists of a milk container placed directly inside the machine. The milk is drawn from this container, frothed interna lly, and then dispensed into the cup.
Nanotechnology Nanotechnology substantially facilitates the cleaning process. The pr oven properties of nanotechnology guarantee that all components in contact with milk are perfectly clean.
Aqua Prima Water Filter The Aqua Prima water filter was developed to remove impurities from your water that alter the taste of your coffee. The AquaPrima water filters purpose is to improve the taste of your coffee while protecting your machine from lime scale damage.
Image used only as an example.

GENERAL INFORMATION

The coffee machine is intended for preparing espresso by using either coffee beans or ground coffee. It includes an automatic device for preparing milk beverages and a hot water dispenser. The machine is elegantly designed for domestic use and is not suitable for continuous heavy duty or professional use. Warning: no liability is assumed for any damage caused by: Incorrect use not in accordance with the intended uses; Repairs not carried out by authorized customer service centers; Tampering with the power cord; Tampering with any part of the machine; The use of non-original spare parts and accessories; Failure to descale the machine or use at temperatures below 0C.
IN THESE CASES, THE WARRANTY IS NOT VALID.
A WARNING TRIANGLE DRAWS ATTENTION TO ALL THE INSTRUCTIONS THAT ARE IMPORTANT FOR USER SAFETY. PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY TO AVOID SERIOUS INJURY!
HOW TO USE THESE OPERATING INSTRUCTIONS
Keep these operating instructions in a safe place and make them available to anyone else who may use the coffee machine. For further information or if you experience problems not completely or sufciently addressed in these instructions, please contact an Authorized Customer Service Center.

KEEP THESE INSTRUCTIONS

APPLIANCE
Open coffee bean hopper button Cup warming plate Control panel SBS Dispensing head Drip tray + grill and oat Service door Coffee grounds drawer Coffee bean hopper Coffee bean hopper cover Compartment for preground coffee Main switch
Compartment for milk container Button for raising/lowering the drip tray Milk compartment button Hot water spout

Water tank

Socket for power cord

Brew group Drip tray

ACCESSORIES

Grinder adjustment key

C Cappuccinatore i t maintenance kit

Intenza water lter

Water hardness tester
Lubricant for the brew group
i detergent Cleaning d t (Brew group)
Detergent for cleaning milk container
Ground coffee measuring scoop

INSTALLATION

STARTING THE MACHINE
Make sure that the main power button is not switched to the ON position.
Press the button on the coffee hopper to open the cover. Fill the hopper with coffee beans.
Close the cover pushing it down completely.
Remove the water tank. We recommend installing the water lter (see page 7).
Fill the tank with fresh drinking water. Do not exceed the max level indicated on the water tank. Once lled place the tank back into the machine.

Attach the female end of the power cord to the machine. Insert the male end into the power outlet.
Place a container beneath the hot water spout.
BEFORE PERFORMING ANY OPERATION, COMPLETE THE INSTALLATION (PAGES 6 7). TO ADJUST THE WATER HARDNESS LEVEL AND SET THE INTENZA AROMA SYSTEM SEE THE WATER
Press the main switch to the On position.
HARDNESS MENU ON PAGE 21.

SETTING THE LANGUAGE

When the machine is switched-on for the rst time, it requires the selection of the desired language. This allows you to adjust the parameters of the beverages to the typical parameters of the country where the machine is used. This is why some languages are differentiated also by country.

english language

water filter inserted yes
Select the language by navigating the click wheel with your nger.
When the desired language is displayed, press. The machine now displays the messages in the selected language.
The machine displays the following menu. Wait before making the selection.
In this phase you must decide whether to install the water lter. Its use is recommended by Saeco. The water lter puries water and allows you to taste the full aroma of coffee. If you want to install the water lter, go to page 7.

water filter inserted no

press ok boiler filling
1. 2. Otherwise, select and press. Press to prime the circuit; wait until the machine stops.

warming up please wait

rinsing please wait
strong aroma espresso coffee 08:33
When the priming is completed, wait until the machine has nished the heating phase.
Once the heating phase is completed, a small quantity of water is dispensed. Wait for this cycle to be completed automatically. Refer to page 21 to enable/disable the function.
The screen for product dispensing appears on the display.

INTENZA WATER FILTER

To improve the quality of the water you use, and extend the life of your machine at the same time, it is recommended that you install the water lter. After installation, go to the water lter initialization program (see programming). In this way, the machine informs the user when the water lter must be replaced. Remove the water lter from its packaging, immerse it vertically (with the opening facing upwards) in cold water and gently press its sides so as to let the air bubbles out.
Remove the small white lter from the tank and store it in a dry place sheltered from dust.
Set the Intenza Aroma System: A = Light water B = Medium water (standard) C = Hard water For further details see page 21

Insert the lter in its place within the empty tank (see gure); Press down until it clicks into place.
Fill the tank with fresh drinking water and reinsert it into the machine.
Place a container under the spout.

push ok initialisation

in progress initialisation

done initialisation

again.
The machine initialises the lter.
Then, press repeatedly. When the exit message is displayed, press. In this way, the machine ends the start-up phase. Wait until at the end of the procedure, the display shows what is shown on page 8. NOTE: if the Intenza water lter is not available, insert the small white lter previously removed (see point 1) into the tank.

DISPLAY

Enter the programming menu
Select dispensing of beverages with milk

Click wheel

Conrmation key
Select the coffee bean dose or the quantity of preground coffee
Hot water brewing selection key

Press the complete.

key twice to make 2 cups. This operation can be performed until the grinding is Press twice
strong aroma double espresso 08:33
To brew 2 cups, the machine dispenses half of the entered quantity and briey interrupts dispensing in order to grind the second serving of coffee. Coffee dispensing is then restarted and completed. If a milk beverage has been chosen, the machine automatically manages milk dispensing.

COFFEE AROMA

By pressing the key, there are three possible selections (strong, medium, mild) that indicate the aroma (coffee quantity to be ground by the machine) for the beverage selected. This key enables you to select also the ground coffee function.
strong aroma espresso coffee 08:33 medium aroma espresso coffee 08:33 mild aroma espresso coffee pre-ground espresso coffee 08:33 08:33
SELECT THE DESIRED AROMA BEFORE DISPENSING THE BEVERAGE.

ADJUSTMENTS

COFFEE INTENSITIY
The SBS system has been carefully designed to give your coffee the intense taste you desire. Simply turn the dial and you will notice that the coffee goes from mild intensity to strong intensity.

SBS SAECO BREWING SYSTEM

SBS adjusts the intensity of the brewed coffee, and can even be adjusted while brewing. Any adjustment has an immediate effect on the brewing coffee.

MEDIUM COFFEE

MILD COFFEE

STRONG S COFFEE C

ADJUSTING THE HEIGHT OF THE DRIP TRAY
Adjust the drip tray before dispensing any beverages. Height-adjustable drip tray. To raise the drip tray, press lightly on the lower part of the button. To lower the tray, press lightly on the upper part of the button; when the desired height is reached, release the button. Note: there is a red oater in the drip tray. When it rises, the tray must be emptied and washed.
FILLING THE MILK CONTAINER
The container with the cappuccinatore must be lled before preparing any milk beverage. Do not use milk after the best-before date. (Important! Refer to the instructions for maintenance and cleaning of the cappuccinatore on page 38).

Open the milk compartment by pressing the button and remove the milk container.
Remove the cover and pour in the milk. DO NOT EXCEED THE MAXIMUM LEVEL shown in the gure.
Replace the lid on the container and place it back in the milk compartment. Make sure to carefully close the compartment.

BEVERAGE DISPENSING

THE DISPENSING OF COFFEE, HOT WATER AND MILK MAY BE STOPPED AT ANY TIME BY PRESSING THE KEY AGAIN. THE DISPENSED MILK MAY BE VERY HOT: DANGER OF SCALDING. AVOID TOUCHING IT DIRECTLY WITH YOUR HANDS. THE USED MILK HAS TO BE PROPERLY PRESERVED. DO NOT USE IT AFTER THE BEST-BEFORE DATE SHOWN ON THE PACK AGE.
Check that all the containers are clean. To do this operation, follow the instructions in the Cleaning and Maintenance chapter (see page 37)
WHEN YOU HAVE FINISHED PREPARING BEVERAGES CONTAINING MILK, PROCEED BY CLEANING THE CONTAINER AND THE MACHINES CIRCUIT.
To brew 2 cups, the machine dispenses half of the entered quantity and briey interrupts dispensing in order to grind the second serving of coffee. Coffee dispensing is then restarted and completed. If a milk beverage has been chosen, the machine automatically manages milk dispensing.
ESPRESSO / COFFEE / LONG COFFEE
This procedure shows how to dispense an espresso. To dispense another type of coffee, select it by sliding the click wheel with a nger. Use appropriate espresso or coffee cups so that the coffee will not overow.
brewing in progress espresso coffee
Select the desired beverage by navigating the click wheel with your nger.
Select the coffee aroma by pressing the key one or more times.
Press the key once for 1 cup and twice for 2 cups. The selected beverage will be brewed.
The machine ends dispensing automatically according to the quantity determined by the manufacturer. It is possible to customize this quantity. See page 16.
DISPENSING BEVERAGES WITH GROUND COFFEE
Pre-ground coffee must be poured into the appropriate compartment positioned next to the coffee bean hopper. Pour in only coffee ground for espresso machines and never coffee beans or instant coffee. (see the Beverage programming chapter on page 16). WARNING: PUT PRE-GROUND COFFEE IN THE COMPARTMENT ONLY WHEN YOU WISH TO DISPENSE THIS TYPE OF BEVERAGE. INSERT ONLY ONE SCOOP OF GROUND COFFEE AT A TIME. TWO CUPS OF COFFEE CANNOT BE DISPENSED AT THE SAME TIME. In the example given below, we chose to dispense an espresso using pre-ground coffee. The customized choice of using pre-ground coffee is shown on the display.

CUP WARMER MENU

3 Select by navigating the click wheel with your nger. It is possible to set: - always on - always off - off in stand-by
Press the button to save.

WATER FILTER MENU

> machine settings > water filter. This function provides better management of the lter notifying the user when the lter is to be replaced. This function must: activated when you wish to use the water lter; deactivated when you do not wish to use the water lter.
water filter water filter activation
1. 2. The lter control can be activated or deactivated from this menu.
4 Select by navigating the click wheel with your nger. It is possible to set: - on
- off Press the button to save.
water filter initialization
Refer to the lter initialisation procedure described on page 7. 2.
A newly installed lter can be initialised from this menu.

RINSE MENU

> machine settings > rinse cycle. To clean the internal tubes in order to guarantee that the beverages are dispensed only with fresh water. This function has been enabled by the manufacturer on all new appliances.
3 Select by navigating the click wheel with your nger. It is possible to set: - yes
- no Press the button to save.
Note: This rinse cycle is performed every time the machine is turned on after the warming phase.
WATER HARDNESS MENU - INTENZA AROMA SYSTEM
> machine settings > water hardness. With the Water hardness function you can adjust your machine and the Intenza water lter to the level of hardness of the water you use, so that the machine will request descaling at the right moment. The water hardness in the Intenza water lter is expressed on a scale from A to C. The water hardness in the machine is expressed on a scale from 1 to 4.

Intenza Aroma System B A

1 Immerse the water hardness tester (included in the accessories) for one second in water. The test can be used only for one measurement.
4 Machine water hardness setting
Check the water hardness level obtained from the test. The measurement can be used to set the Intenza Aroma System correctly (see page 7). Matching parameters are described on the upper part.

3 + water hardness

1. 2. Set and store the water hardness according to the value on the tester.
> machine settings > acoustic alerts To enable/disable the acoustic alarms of the machine.

ACOUSTIC ALARM MENU

acoustic alerts key tone
Select by navigating the click wheel with your nger. You may set: - key tone: to activate/deactivate a tone each time a key is pressed. - milk quality warning: to activate/deactivate a tone when the milk container has been in the machine for too long. - confirmation tone: to activate/deactivate a tone to conrm that a command (beverage saved, etc.) has been performed. - milk circ. rinsing tone: to activate/deactivate a tone when the machine requires milk circuit cleaning. - milk circ. rinse warning: to activate/deactivate a tone when the milk circuits have to be rinsed.

Milk wash cycle

> machine settings > maintenance > milk cleaning cycle To clean the machines internal circuits used for preparing milk. This cycle is proposed after 14 days from the rst dispensing of a milk-based beverage. After 14 days, the milk circuit washing message starts ashing (see page 13). Perform the washing cycle as indicated in this section. If the milk circuit washing cycle is not performed, dispensing milk-based products will be possible for only 7 more days. After 21 days (the machine warns the user 3 days before the deadline is reached with the message milk circuit washing -3), the milk circuit washing message stops ashing and appears any time the button to select a milk-based beverage is pressed. At this point, the milk circuit washing cycle must be performed, because the dispensing of milk-based beverages is disabled. (The machine still enables dispensing hot water and coffee). When the message milk circuit washing appears on the display, press the button page 26, step 4. The screen will appear as shown in step 9. Note: before performing this function make sure that: 1. a large enough container is at hand; 2. the milk container has been adequately cleaned of all milk residue; 3. the water tank contains a sufcient quantity of water. THE WASH CYCLE CANNOT BE INTERRUPTED. A PERSON MUST BE PRESENT DURING THE OPERATION. USE ONLY AND EXCLUSIVELY THE PROVIDED DETERGENT. and instructions on

yes milk cleaning cycle

1. 2. Select and press.
Detergent residue or water may remain in the container during the wash and rinse cycles. In this case, empty the container from any residue before lling it again.
Open the compartment and remove the milk container.
Insert the content of the detergent packet into the container.
Fill the milk container with fresh water up to the max level.
add cleaner into milk cleaning cycle
Open the compartment and insert the container with the detergent.
Position an adequately sized container under the milk spout.
Close the compartment. Press to start.
in progress milk cleaning cycle
rinse milk cleaning cycle
The wash cycle starts automatically. Wait for the wash cycle to nish.
When the wash cycle has nished the following appears The machine emits a tone.
Remove the milk container.
fill with water milk cleaning cycle
push ok milk cleaning cycle
rinsing milk cleaning cycle
Rinse the container and ll it with fresh water.
Insert the container and press.
When the rinse cycle is nished the following appears
Perform another rinse cycle as shown previously. At the end, press the key.
> machine settings > maintenance > descaling cycle

descaling descaling cycle
fill water tank descaling cycle
insert tank descaling cycle
The machine begins to dispense the descaling solution through the hot water spout. The dispensing occurs at preestablished intervals, in order to allow the solution to be more effective.
Remove the water tank, rinse with fresh drinking water to eliminate traces of descaling solution, then rell with fresh drinking water.
Insert the tank with fresh drinking water.
rinse cycle descaling cycle

rinsing descaling cycle

done descaling cycle
Rinse the machine circuits by pressing the key.
The machine performs the rinse cycle. During the rinse cycle, the machine may require the water tank to be lled.
key and exit the Press the programming by pressing the key. Check the quantity of water contained in the tank and, if desired, install the water lter or reinsert the small white lter (see page 7).
> machine settings > clock settings To set the current time, date and hour format to display.

CLOCK SETTINGS

In this menu you can set: - the current time (hour and minutes) - the hour format (24 hours - AM/PM) - the current date (day month year day of the week).

Time setting

> machine settings > clock settings > time settings To set the current time on the machine
clock settings time setting

09h (am) + time setting

1. 2. Set the time by navigating the click wheel with your nger. Save using the button.

43 min + time setting

1. 2. Set the minutes by navigating the click wheel with your nger. Save using the button.

Date setting

> machine settings > clock settings > date setting To set the date (day, month, year, day of the week). Same procedure for all parameters.
clock settings date setting

date setting day

1. 2. Select the parameter you want to set, for example day. Press the key to conrm.

12 day +

The machine stores the selected value, returns to the previous screen and enables another parameter to be set.
1. 2. Set by navigating the click wheel with your nger. Save using the button.

Time format

> machine settings > clock settings > time format To set the time view mode. The modication of this setting adjusts all the parameters that require viewing/ setting the time.
clock settings time format

am/pm time format

The machine also allows displaying the time in the international format (24h). 2.
> machine settings > stand-by setting

This menu allows you to access special functions present on the machine. To access, press the key and select special functions. Turn the click wheel with a nger to:
special functions cancel settings special functions coffee of the world
restore the factory settings.
special function product counters
prepare coffee according to the most famous recipes in the world.
Display how many beverage have been prepared for each single type of beverage.
DELETING ALL THE SETTINGS
> special funtions > cancel settings The function for restoring all the factory settings is contained in this menu. This function is particularly important for restoring the base parameters. ALL THE CUSTOM SETTINGS WILL BE LOST AND CANNOT BE RECOVERED. AFTER RESTORING FACTORY SETTINGS, YOU MUST, IF DESIRED, REPROGRAM ALL THE MACHINES FUNCTIONS.
special functions cancel settings

yes cancel settings

1. 2. If yes is selected, a subsequent conrmation is requested to be sure that you want to perform the reset.
are you sure? cancel settings
all factory settings have been restored

key to reset.

The display shows for 2 seconds the parameter reset conrmation.

COFFEE IN THE WORLD

> special funtions > coffee of the world This function enables the user to:
coffee of the world ristretto
coffee of the world espresso italiano

coffee of the world caf

prepare true ristretto allitaliana
coffee of the world caf crme
prepare a typical Italian espresso
coffee of the world american coffee
prepare a typical North European coffee
coffee of the world good morning coffee
prepare a typical French/ Swiss coffee
coffee of the world good night milk
prepare a typical American coffee
prepare a coffee for a day full of energy
prepare a avourful latte macchiato without the fear of not being able to sleep
If for example, you want to taste a typical American coffee, you must select American coffee.
special functions coffee of the world

yes american coffee

1. 2. Select the desired beverage.
1. 2. Conrm the selection.
sbs position: crme american coffee
brewing in progress american coffee
Set the SBS to the position shown (see page 9). Press to start.

The dispensing starts.

At the end, the machine returns to the main screen.

BEVERAGE COUNTERS

> special funtions > product counters This function shows how many beverages have been prepared for every single type of beverage.

23 espresso coffee

1. 2. You may display the data of every single type of beverage by navigating the click wheel with your nger.

to exit.

CLEANING AND MAINTENANCE
MAINTENANCE DURING OPERATION
During normal operation, the empty grounds drawer message may appear. This operation must be performed when the machine is on.
If you remove grounds with the machine off or when not signaled on the display, the count of the grounds emptied into the drawer is not reset. For this reason the machine might display the empty grounds drawer message even after preparing just a few coffees. Remove the grounds drawer and empty and wash it.

GENERAL MACHINE CLEANING

The cleaning described below must be performed once a week. Note: if water remains for several days in the tank, do not reuse it. WARNING! Do not immerse the machine in water. Clean the cappuccinatore as shown in the corresponding section on page 38.
Switch off the machine and unplug it.
Clean the tank and the cover.
Remove the drip tray, empty and wash it
Clean the pre-ground coffee compartment with a dry cloth. Clean the display.
Clean the cappuccinatore as shown in the corresponding section on page 38.
MILK CONTAINER MAINTENANCE AND CLEANING
The milk container and the cappuccinatore have been designed to optimize the milk froth. Thorough cleaning and maintenance of the milk container and cappuccinatore will allow you to savour excellent milk-based beverages. It is recommended to rinse the cappuccinatore before the rst daily dispensing of milk-based products and however to wash it thoroughly at least once a week.
QUICK MAINTENANCE OF THE CAPPUCCINATORE
If you notice a reduction in the milk froth, simply turn the ow regulator as shown in the gure. Turn the regulator 2-3 times to perform quick maintenance. Note: if the adjusting device installed is missing, replace it with the adjusting device supplied with the cappuccinatore maintenance kit.
WASHING TO STORE THE CONTAINER IN THE MACHINE.
After using milk to prepare beverages, the container may be stored in the machine only if it has been washed with fresh drinking water. These few simple steps guarantee that the machine will operate properly.
Pour any extra milk into a container.
Rinse all the parts in contact with milk with lukewarm water.
Dry and replace the milk container into the compartment.
MAINTENANCE OF O-RING FOR MILK CONTAINER
In the machine there is an O-ring which guarantees the correct operation of the milk container. Every 6 months, remove the water tank, open the milk container and lubricate the O-ring using the grease supplied with the machine. The grease for the Brew Groups lubrication may be purchased in authorized service centres.

DANGERS

Children should be supervised to ensure that they do not play with the appliance. The appliance is dangerous to children. When left unattended, unplug from the electrical outlet. Keep the coffee machine packaging out of the reach of children. Never direct the jet of hot water and/or steam towards yourself or others. Danger of scalding. Do not insert objects through the appliances openings. (Danger! Electrical Current!). Do not pull out the plug by yanking on the power cord or touching it with wet hands. Warning. Danger of burning when in contact with hot water, steam and the hot water spout.

FAILURES

Do not use the appliance if a failure has been veried or suspected, for example after being dropped. Any repairs must be performed by an authorized customer service center. Do not use the appliance with a defective power cord. The manufacturer or its customer service center will have to replace the power cable if damaged. (Caution! Electrical Current!) Turn off the appliance before opening the service door. Danger of burns!

CLEANING / DESCALING

Clean the milk circuit only with the recommended detergent powder supplied with the machine. Carefully follow the safety instructions given on the packaging. Clean the coffee circuit only with the recommended detergent tablets supplied with the machine. Carefully follow the safety instructions given on the packaging. Before cleaning the machine, the main switch must be turned to OFF (0), unplugged from the socket and cooled down. Keep the appliance from coming into contact with splashes of water or immersing in water. Do not dry the machines parts in conventional or microwave ovens. The machine and its components must be cleaned and washed after the machine has not been used for a certain period.

REPLACEMENT PARTS

For safety reasons, use only original replacement parts and original accessories.

WASTE DISPOSAL

- The packing materials can be recycled. - Appliance: unplug the appliance and cut the power cord. - Deliver the appliance and power cord to a service center or public waste disposal facility
This product complies with EU Directive 2002/96/EC. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city ofce, your household waste disposal service or the shop where you purchased the product.

FIRE SAFETY

In case of re, use Carbon Dioxide extinguishers (CO 2). Do not use water or dry-powder extinguishers.

TECHNICAL DATA

ADDITIONAL INFORMATION FOR THE CORRECT USE OF THE INTENZA WATER FILTER
To correctly use the Intenza water lter, please consider the following instructions: 1. Store the water lter in a cool area in which the room temperature is between +1C - +50C (34F to 122F). Do not store it in direct sunlight. 2. Carefully read the operating instructions and the safety warnings provided with each lter. 3. Keep the lter instructions together with the manual. 4. These instructions integrate those contained in the manual, as they focus on the specic application of the lter in the machine.
Nominal voltage Power rating Power supply Shell material Size (w x h x d) Weight Cord length Control panel Water tank Milk Tank Coffee Bean Hopper Capacity Pump pressure Boiler Coffee grinder Pressure safety device Temperature safety device See label on the appliance See label on the appliance See label on the appliance Plastic 355 x 380 x 460 mm - 13.8 x 15.4 x 16.Kg - 30.9 lbs 1200 mm - 42.2 Front (display 2x24) 2 liters - 68 oz. / Removeable ca. 0.400 liters - 12.5 oz. / Removeable 350 grams - 8.9 oz. / of coffee beans 15 bar Stainless steel Ceramic Boiler pressure safety valve Boiler thermostats and thermal fuses
Subject to engineering and manufacturing changes due to technological developments. The machine conforms to European Directive 89/336/EEC (Italian Legislative Decree 476 dated 04/12/92) concerning electromagnetic compatibility.
EC DECLARATION OF CONFORMITY EC 2006/95, EC 2004/118, EC 1992/31, EC 1993/68
SAECO INTERNATIONAL GROUP S.P.A
- Via Torretta, 240 - 40041 Gaggio Montano (Bo) - Italy declare under our responsability that the product: AUTOMATIC COFFEE MAKER

SUP 030 ND

to which this declaration relates is in conformity with the following standards or other normative documents :
Safety of household and electrical appliances - General requirements EN 60335-1(2002) + A1(2004) + A2(2006) + A11(2004) + A12(2006) Safety of household and electrical appliances - Part 2-15 Particular requirements for appliances for heating liquids EN 60335-2-15(2002) + A1(2005) Household and similar electrical appliances - Electromagnetic elds - methods for evaluation and measurement EN 50366 (2003) + A1 (2006). Household and similar electrical appliances - safety - Part 2-14 Particular requirements for kitchen machines EN 60335-2-14 (2006). Electromagnetic compatibility (EMC) - Requirements for household appliances , electric tools and similar apparatus - Part 1 Emission EN 55014-1 (2000) + A1 (2001) + A2 (2002). Electromagnetic compatibility (EMC) Part. 3^ Limits - Section 2 : Limits for harmonic current emissions (equipment input current 16A for phase) - EN 61000-3-2 (2000) Electromagnetic compatibility (EMC) Part 3^ : Limits - Section 3 : Limitation of voltage changes , voltage uctuations and icker in public low - voltage supply systems , for equipment with rated current 16 A for phase and not subject to conditional connection EN 61000-3-3 (1995) + A1 (2001) Electromagnetic compatibility - Requirements for household appliances , electric tools and similar apparatus - Part 2. Immunity - Product family standard EN 55014-2 (1997) + A1 (2001)

Following the provision of the directives: EC 73/23, EC 89/336, EC 92/31, EC 93/68

R & D Manager

Gaggio Montano - li, 27/06/2007 Mr. Andrea Castellani
Saeco International Group S.p.A. Via Torretta, 240 I-40041 Gaggio Montano, Bologna Tel: + 771111 Fax: + 31025 www.saeco.com
The manufacturer reserves the right to change the features of the product without prior notice.
Saeco International Group S.p.A.

Type SUP030ND

Cod.15001343 Rev.00 del 15-09-07