HOW TO USE THESE OPERATING INSTRUCTIONS
Keep these operating instructions in a safe place and make them available to anyone else who may use the coffee machine. For further information or if you experience problems not completely or sufciently addressed in these instructions, please contact an Authorized Customer Service Center.

KEEP THESE INSTRUCTIONS

MACHINE
Open coffee bean hopper button Cup warming plate TOUCH SCREEN Display SBS Dispensing head Drip tray + grill and oat Service door Coffee grounds drawer Coffee bean hopper Coffee bean hopper cover Compartment for preground coffee Main switch
Compartment for milk container Button for raising/lowering the drip tray

Hot water spout

Water tank Socket for power cord

Brew group Drip tray

ACCESSORIES
Additional milk container (without cappuccinatore)
Cappuccinatore maintenance kit
"Aqua Prima" Filter

Water hardness tester

Grinder adjustment key
Lubricant for the brew group
Cleaning detergent (Brew group)
Detergent for cleaning milk container
Ground coffee measuring scoop

INSTALLATION

STARTING THE MACHINE
Make sure that the main power button is not switched to the ON position.
Press the button on the coffee hopper to open the cover. Fill the hopper with coffee beans.
Close the cover pushing it down completely.
Remove the water tank. We recommend installing the "Aqua Prima" lter (see page 7).
Fill the tank with fresh drinking water. Do not exceed the max level indicated on the water tank. Once lled place the tank back into the machine.
Attach the female end of the power cord to the machine. Insert the male end into the power outlet.
Place a container beneath the hot water spout.
The machine automatically primes the water circuit. The machine is now ready for use. Press the main switch once to turn on the machine. The appliance automatically performs a diagnosis of its functions. This test is performed each time the machine is turned on. Water may not be dispensed into the glass. This should not be considered a malfunction.
TO ASSESS WATER HARDNESS, SEE "WATER HARDNESS MENU" ON PAGE 20.
MANUAL PRIMING OF THE WATER CIRCUIT
Manually prime the water circuit only when the following display appears. Note: rst make sure that the water tank is full.

priming the machine

Position a container under the hot water spout (it is possible that water will not come out of the spout).
Press the display once and the machine will begin priming the water circuit.
When the prime circuit cycle is nished, remove the container. The machine is now ready for use.

TEXT FORMAT

latte espresso macchiato cappuccino macchiato medium hot water long coffee medium medium strong

coffee medium

my custom coffee

espresso strong

programming menu

show icon explanation

show icon
Go to the "text format" menu

Beverage programming

Accessing the programming menu
Go to the "icon format" menu
To get the desired beverage, press the corresponding symbol on the display. The machine automatically performs all the necessary operations. To make 2 cups, press the beverage symbol twice. press twice

CHOOSE COFFEE AROMA

The intensity of the color on the cup icon (only valid for coffee beverages) indicates the aroma, or quantity of coffee to be ground, for preparing the beverage. The greater the quantity of coffee ground the stronger the coffee will taste.

medium

strong
When the machine is programmed to use pre-ground coffee or when a beverage is customized, the icon is displayed in a different way and/or accompanied by an asterisk (see section on programming beverages.)

pre-ground

customization

ADJUSTMENTS

COFFEE INTENSITIY
The SBS system has been carefully designed to give your coffee the intense taste you desire. Simply turn the dial and you will notice that the coffee goes from mild intensity to strong intensity.

SBS SAECO BREWING SYSTEM

SBS adjusts the intensity of the brewed coffee, and can even be adjusted while brewing. Any adjustment has an immediate effect on the brewing coffee.

MEDIUM COFFEE

MILD COFFEE

STRONG COFFEE

ADJUSTING THE HEIGHT OF THE DRIP TRAY.
Adjust the drip tray before dispensing any beverages. Height adjustable drip tray. To raise the drip tray, press lightly on the lower part of the button. To lower the tray, press lightly on the upper part of the button; when the desired height is reached, release the button. Note: There is a red oater in the drip tray. When it rises, the tray must be emptied and washed.
FILLING THE MILK CONTAINER
Only the container with the cappuccinatore must be lled before preparing beverages with milk. Do not use milk after the best-before date. (Important! Refer to the instructions for maintenance and cleaning of the cappuccinatore on page 40).
We recommend using the other supplied container to store any remaining milk in the refrigerator. Clean the circuits using only the container with the cappuccinatore.
Open the milk compartment and remove the container located within.
Remove the container cover and pour in the milk. DO NOT EXCEED THE MAXIMUM LEVEL shown in the gure. Close the container and place it back in the milk compartment. Make sure to carefully close the compartment.

BEVERAGE DISPENSING

DISPENSING COFFEE, HOT WATER AND MILK CAN BE INTERRUPTED AT ANY TIME BY SELECTING THE "STOP. DISPENSING" BUTTON. THE DISPENSED MILK CAN REACH HIGH TEMPERATURES: THERE IS A DANGER OF SCALDING. DO NOT TOUCH IT WITH BARE HANDS. THE MILK USED MUST HAVE BEEN PROPERLY PRESERVED. DO NOT USE IT AFTER THE EXPIRATION DATE ON THE PACK AGE.
Check that all the containers are clean. To do this operation, follow the instructions in the "Cleaning and Maintenance" (see page 39).
WHEN YOU HAVE FINISHED PREPARING BEVERAGES CONTAINING MILK, PROCEED WITH CLEANING THE CONTAINER AND THE MACHINE'S CIRCUIT.
To brew 2 cups, the machine dispenses half of the entered quantity and briey interrupts dispensing in order to grind the second serving of coffee. Coffee dispensing is then restarted and completed.If a milk beverage has been chosen, the machine automatically dispenses the milk. If the rst coffee is interrupted, the second will not be dispensed.
ESPRESSO / COFFEE / LONG COFFEE
This procedure shows how to dispense an espresso. To dispense another type of coffee, press the appropriate icon. Use appropriate espresso or coffee cups so that the coffee will not overow.

espresso

stop coffee dispensing
Choose the beverage and press the corresponding icon on the display: once for 1 cup and twice for 2 cups.
The machine begins grinding the quantity of coffee entered.
Begin dispensing the selected beverage.
The machine ends dispensing automatically according to the quantity determined by the manufacturer. It is possible to customize this quantity. See page 15. If you wish to interrupt the dispensing cycle, press the " stop coffee dispensing" button.
DISPENSING BEVERAGES WITH GROUND COFFEE
Pre-ground coffee must be poured into the appropriate compartment positioned next to the coffee bean hopper. Pour in only coffee ground for espresso machines and never coffee beans or instant coffee. (see the "Beverage programming" chapter on page 15). WARNING: PUT PRE-GROUND COFFEE IN THE COMPARTMENT ONLY WHEN YOU WISH TO DISPENSE THIS TYPE OF BEVERAGE. INSERT ONLY ONE SCOOP OF GROUND COFFEE AT A TIME. TWO CUPS OF COFFEE CANNOT BE DISPENSED AT THE SAME TIME. In the example given below, we chose to dispense a long coffee using pre-ground coffee. The customized choice of using pre-ground coffee is shown on the display with an asterisk next to the chosen beverage.

add preground coffee start!
Press the appropriate button and the display will show:
A message appears, reminding the user ground coffee in the appropriate compartment.
Pour ground coffee into the preground coffee compartment using the measuring scoop provided with the accessories.

long coffee

stop coffee dispensing go back
Press the "start! "button to start dispensing.
Begins dispensing the selected beverage.
Note: After 1 minute from when the message appears (2), if brewing has not started the machine will return to the main menu and dump any inserted coffee into the coffee grounds drawer. If no pre-ground coffee is poured into the compartment, only water will be dispensed. If 2 or more scoops of coffee are added, the machine will not dispense the beverage and the coffee in the compartment will be dumped into the coffee grounds drawer.

HOT WATER DISPENSING

WHEN THE HOT WATER BEGINS TO DISPENSE, SHORT SPURTS OF HOT WATER MAY BE DISPENSED WHICH POSE A RISK OF SCALDING. THE HOT WATER SPOUT CAN REACH HIGH TEMPERATURES: AVOID TOUCHING IT WITH BARE HANDS.

hot water

To dispense another cup of hot water, repeat this operation.

stop water dispensing

Press the hot water icon once.
Begin hot water dispensing.

LATTE MACCHIATO

SEE INSTRUCTIONS ON PAGE 40 FOR OPTIMAL MILK DISPENSING Fill the milk container

latte macchiato

stop milk dispensing
Select the beverage and press the corresponding icon on the display: once for 1 cup and twice for 2 cups.
When the coffee nishes grinding, the machine will automatically dispense the programmed quantity of hot milk.

add milk

milk rinsing
Once milk has been dispensed, the machine automatically prepares the coffee.
After this, the machine allows you to dispense more milk if you wish. This option remains active for approximately 2 seconds. To activate, press the add milk button.
The milk rinsing icon will ash once the machine is done dispensing in order to clean the milk circuit. Press the milk rinsing icon to clean the internal milk circuit.

If the user wishes to continue preparing other drinks the machine will keep the milk rinsing signal active. After 20 minutes of inactivity, the machine requires the user to perform a rinsing cycle as described in Step 7. If the machine is turned off immediately after dispensing a milk beverage, the next time the machine is turned on it will require the user to perform a rinsing cycle. Note: Before performing the milk rinsing function make sure that: 1. an adequate sized container is placed under the dispensing head 2. the milk container with the cappuccinatore is lled with fresh drinking water and inserted in the machine. 3. the water tank is full of fresh water.

milk cleaning

After 14 days from the rst dispensing of a milk-based beverage, the message milk cleaning is displayed; it is advisable to clean the milk circuits as shown on page 28. After another 7 days the machine stops dispensing milk-based beverages and the milk circuits must be washed; during this phase, coffee and hot water may be brewed.
milk rinsing cycle rinse the milk container

start rinsing

rinsing milk circuitplease wait

rinsing.

Remove the milk container from the machine. If it still contains milk, pour the milk in the additional container, to store in the refrigerator for future use. Rinse the container with the cappuccinatore and ll it with fresh water; place it in the machine and press the start rinsing key.
While the machine is rinsing the user cannot interrupt the cycle, but must wait until the cycle is completed. Once completed the machine returns to the main menu.
Remove the container, rinse and dry.
THIS PROCEDURE MUST BE PERFORMED FOR ALL MILK BEVERAGES!

DISPENSING HOT MILK

Fill the milk container
To dispense another cup of milk, repeat this operation. When the "milk rinsing" symbol ashes, clean the milk circuits as described for latte macchiato (see page 12, Step 6).
Press the hot milk icon once.
The hot milk is dispensed.

ESPRESSO MACCHIATO

espresso macchiato
Press the icon once for 1 cup and twice for 2 cups.
Espresso macchiato begins brewing.
When the "milk rinsing" symbol ashes, clean the milk circuits as described for latte macchiato (see page 12, Step 6).
Once the coffee has been brewed, the machine automatically prepares the hot milk.
To dispense more milk, press the add milk icon.

CAPPUCCINO

cappuccino
When the coffee nishes grinding, the machine will dispense the programmed quantity of hot milk. When the "milk rinsing" symbol ashes, clean the milk circuits as described for latte macchiato (see page 12, Step 6).
After this, the machine allows you to dispense more milk if you wish. Press the add milk button within 2 seconds.

BEVERAGE PROGRAMMING

BEVERAGE PROGRAMMING MENU
Each beverage can be programmed according to your individual taste. Customization is shown on the display with the addition of an asterisk.
Once a beverage has been customized it will only dispense that type of beverage. To change or modify the beverage a new customization must be done. To program the desired beverage:
show icon explanation my custom coffee programming menu show icon explanation my custom coffee programming menu
Hold down the beverage button for two seconds
Press the button "my coffee" and within two seconds, press the beverage button
ESPRESSO / COFFEE / LONG COFFEE PROGRAM

In this menu you can:

select the quantity of coffee to be ground (aroma).

my espresso

start!

preground

return to the previous window.
select the use of pre-ground coffee.

restore settings

save settings
Enter the menu of the beverage to be customized; press and hold the button for 2 seconds.
restore factory settings.

save settings.

Selecting a different quantity of coffee changes the aroma of the beverage.

3 light

4custom coffee
After pressing the start! button, the brew cycle will start.

preground amount

Pressing start! allows the machine to brew coffee.

custom coffee amount

The machine automatically starts and nishes brewing the coffee, according to the standard settings.
To brew an amount of coffee greater than that preset by the manufacturer, press custom coffee amount before the end of the brew cycle in progress. When the quantity is reached, press stop coffee dispensing.
The brew cycle may be interrupted only by pressing stop coffee dispensing. If the button is not pressed, the coffee can overow in the cup.
If the "save settings" button is not pressed the machine returns to the main menu and the customized settings will not be saved.

saved!

Once the brew cycle nishes, press "save settings" within ve seconds.
The display shows the conrmation of the memorized settings, and the machine automatically returns to the main menu. Fill the milk tank In this menu you can: 2 light my latte

macchiato

set the operation of the cup warming plate.

LANGUAGE MENU

For changing the language of the display.

deutsch Italiano (i)

This function was described at the beginning of the manual. This setting is of fundamental importance for correctly adjusting the parameters of the machine according to the country where the machine is used. Press to display the next page.

CUP ILLUMINATION MENU

This function allows activating/ deactivating the dispensing area illumination. In this menu you can:

turn off illumination.

restore default settings save settings

turn on illumination.

AQUA PRIMA FILTER MENU
The "Aqua Prima" lter puries water and allows you to taste all the aroma of the coffee. In this menu you can:
proceed with the initialization (cleaning) of the water lter (see page 7). After initialization the insert option is activated. set the machine to operate with the Aqua Prima lter.
set the machine to operate without theAqua Prima lter.
Note: Press "activate lter" each time a new "Aqua Prima" lter is installed. Press "not inserted" when an "Aqua Prima" lter is not used. Press inserted when an Aqua Prima lter is used. This function operates even after pressing the activate lter button.

WATER HARDNESS MENU

To adjust the level of water hardness, shown on a scale of 1 to 4. The machine is preset at a hardness value of 3.
1 Immerse the water hardness strip included in the welcome pack for one second in water.
Check the value. The test can be used only for one measurement.
Press the "water hardness" button.
Set the water hardness on the machine by pressing + or go back restore default settings save settings back to menu

RINSE MENU

To clean the internal circuits for coffee brewing in order to guarantee that beverages are brewed with fresh water only. In this menu you can:
Note: This rinse cycle is performed every time the machine is turned on when it is cool.
deactivate the rinse cycle.
activate the rinse cycle.

CUP WARMING PLATE MENU

To activate the cup warming plate on the upper part of the machine. In this menu you can:

always on

keep the cup warming plate always on.
keep the cup warming plate off when the machine is in stand-by.

off in standby

keep the cup warming plate always off.
ACOUSTIC TONES AND ALARMS MENU

continue the tour

exit and activate the machines normal functions
BEVERAGE COUNTER FUNCTION
This function shows how many beverages have been prepared for every single type of beverage.

beverage counters

hot milk latte macchiato cappuccino espresso macchiato hot water coffee long coffee espresso 0 0

MAINTENANCE

To clean/maintain all of the machines internal circuits, press the maintenance button on the main menu. In this menu you can: lock the Touch Screen (to preform cleaning of the display). begin washing the milk circuits. begin rinsing the milk circuits.
lock display milk cleaning cycle milk circuit rinsing cycle

coffee cleaning cycle

begin the wash cycle of the brew group.

descaling cycle

perform the descaling cycle.

MILK CIRCUIT RINSE CYCLE

To rinse the machines internal circuits used for preparing milk. This short cycle must be performed after 20 minutes from the last dispensing of a beverage with milk. If this rinse cycle is not performed, the machine comes to a halt and does not allow the dispensing of milk-based beverages. Before performing this function make sure that: 1. a large enough container is positioned under the spout. 2. the milk container has been adequately cleaned of all milk residue and contains fresh drinking water. 3. the water tank contains a sufcient quantity of water. Press the "milk rinsing cycle" button and then "start rinsing" to start the milk circuit rinse cycle.
milk circuit rinsing cycle
Wait for the cycle to nish. The machine will return to the main menu.

MILK CIRCUIT WASH CYCLE

To rinse the machines internal circuits used for preparing milk. This cycle is proposed after 14 days from the rst dispensing of a milk-based beverage. After 14 days, the milk cleaning message starts ashing (see page 13). Perform the wash cycle as described in this section.
Push the milk cleaning button and refer to the instructions below, at step 2. The machine switches to the status described at point 7. If the milk circuit wash cycle is not performed after 14 days, the dispensing of milk-based beverages will be still be possible for only 7 more days. After 7 days, the wash cycle must be performed because the dispensing of milk-based beverages is disabled. (The machine still enables dispensing hot water and coffee). To remind the user of this important operation, the message milk cleaning -3 is shown on the display 3 days before the deadline and is updated on subsequent days.

with descaling solution

start descaling

descaling 200

The machine indicates to the user the need to complete the descaling through the message on the main menu. This does not block the machines operation. The number under the message indicates the number of beverages that can be dispensed before the machine before the machine needs to be descaled. 30 beverages before descaling, the button will begin to ash. When the number reaches zero, the machine must be descaled. Pressing the descaling button accesses the descaling menu.
When in the descaling menu, the message ll the water tank with descaling solution appears on the display. Perform the descaling cycle by pressing start descaling as shown.
In order to run a descaling cycle before the machine indicates the necessity to do so, press the button "descaling cycle" and then "start descaling" to start the descaling cycle.
descaling cycle start descaling
descaling cycle please wait

descaling.

pause descaling
The machine begins to dispense the descaling solution through the hot water spout. The dispensing occurs at preestablished intervals, in order to allow the solution to be more effective.
insert the water tank with fresh water
rinsing ciclo di risciacquo cycle
When the solution is nished the following message appears on the display:
Remove the water tank and rinse with fresh drinking water to eliminate traces of descaling solution. Then, rell with fresh drinking water and reinsert water tank.
Rinse the machine circuits by pressing "start rinsing".

pause rinsing

The machine performs the rinse cycle. At the end of the rinse cycle you are requested to ll the tank with fresh drinking water. Before relling the tank, reinsert the Aqua Prima lter if desired.
Put a container under the water spout. When the water tank is inserted the machine automatically proceeds to prime the water circuit. If this operation is not successful, consult "manually priming the circuit" (see page 6)

CLOCK SETTINGS

To adjust the current date and time, the timer for stand-by (energy savings) and the times for automatically turning on and turning off the machine. Press the "clock settings" button on the main menu. In this menu you can:

GUIDE MESSAGE THAT APPEARS restart the machine call assistance insert drip tray close coffee bean container add ground coffee
insert brew group insert dreg drawer empty dreg drawer
close side door rell water tank empty drip tray insert the milk container prime the machine
To be able to make the machine functional, the side door must be closed. The tank must be removed and relled with fresh drinking water. Open the side door and empty the drip tray under the brew group) Insert the milk container in the appropriate compartment Press on the display in order to proceed with manually priming the water circuit. The machine performs an automatic attempt to prime the circuit. If this attempt does not perform correctly you must proceed with these instructions. Contact the customer service center (toll free number) to request assistance on how to resolve the problem. Repeat the operation as described in the appropriate section. see page 13 and 27. see page 13 and 28.
circuit priming failure the descaling cycle has not been completed correctly milk rinsing milk cleaning
ERROR CODES / TECHNICAL DATA
GUIDE MESSAGE THAT APPEARS change acqua prima lter HOW TO REMOVE THE MESSAGE
The Aqua Prima lter must be replaced in the following cases: 1. 60 liters of water has been dispensed; 2. 90 days have passed since its installation; 3. 20 days have passed and the machine has not been used. Note: this message appears only when "inserted" has been selected in the water lter function (See page 19). Repeat the operation as described in the appropriate section. Insert the cappuccinatore in the milk container. Without the cappuccinatore no beverage containing milk can be dispensed. The user must wash the milk tank after it has been used. A descaling cycle must be performed on the machine's internal circuits. Press the "start" button
the cleaning cycle has not been completed correctly insert milk container with cappuccinatore
rinse the milk tank descale the machine energy saving

TECHNICAL DATA

Nominal voltage Power rating Power supply Shell material Size (w x h x d) Weight Cable length Control panel Water tank Milk Tank Coffee Bean Hopper Capacity Pump pressure Boiler Coffee grinder Pressure safety device Temperature safety device See label on the appliance See label on the appliance See label on the appliance Plastic 355 x 380 x 460 mm - 13.8 x 15.4 x 16.Kg - 30.9 lbs 1200 mm - 42.2 (Digital) Front 2 liters - 68 oz. / Removeable ca. 0.400 liters - 12.5 oz. / Removeable 350 grams - 8.9 oz. / of coffee beans 15 bar Two in stainless steel With ceramic grinders Boiler pressure safety valve Boiler thermostats and thermal fuses

Subject to engineering and manufacturing changes due to technological developments. The machine conforms to the European Directive 89/336/EEC (Italian Legislative Decree 476 dated 04/12/92) concerning electromagnetic compatibility.

SAFETY RULES

IN CASE OF EMERGENCY
Immediately unplug the cord from the outlet.

ONLY USE THE APPLIANCE

Indoors. For preparing coffee, hot water and for foaming milk. For domestic use. By adults in non altered psycho-physical conditions.
PRECAUTIONS FOR THE USE OF THE MACHINE
Do not use the machine for purposes other than those indicated above, in order to avoid danger. Do not introduce any substances other than those indicated in the instruction manual. During the normal lling of any reservoirs, all nearby reservoirs must be closed. Fill the water tank only with fresh drinking water: Hot water and/or any other liquid may damage the machine. Do not use water with carbon dioxide added. Do not put ngers or any material other than coffee beans in the coffee grinder. Before manipulating the coffee grinder, turn of the machine's main switch and unplug the cord. Do not put instant coffee or whole bean coffee in the ground coffee container. To operate the machine with the touch screen, use only your ngers.
CONNECTION TO ELECTRICAL POWER
The connection to the electrical network must be carried out in accordance with the safety regulations in force in the user's country. The machine must be connected to a socket which is: compatible with the type of plug installed on the machine; suitably sized to comply with the ratings shown on the machine identication plate. effectively grounded. The power cord must not: come into contact with any type of liquid: danger of electric shocks and/or re; be crushed and/or come in contact with sharp surfaces; be used to move the machine; be used if damaged; be handled with damp or wet hands; be wound in a coil when the machine is being operated. be tampered with.
Choose a solid, stationary at surface (no more than 2 of inclination). Do not install the machine in areas where water could be sprayed. Optimal operational temperature: 10C - 40C / 50-104 degrees Fahrenheit maximum humidity: 90%. The machine should be installed in an adequately lit, ventilated, hygienic location and the electric socket should be within easy reach. Do not place on heated surfaces! Install it at least 10 cm / 4" from the walls and cooking surfaces. Do not use in places where the temperature may drop to a level equal to and/or lower than 0C / 32 degrees Fahrenheit. If the machine has been exposed to such conditions notify the customer service center, who will have to carry out a safety check. Do not use the machine near inammable and/or explosive substances. The machine must not be used in an explosive or volatile atmosphere or where there is a high concentration of dust or oily substances suspended in the air. Do not install the machine on top of other appliances.

DANGERS

The appliance must not be used by children and persons who have not been informed of its operation. The appliance is dangerous to children. When left unattended, unplug from the electrical outlet. Keep the coffee machine packaging out of the reach of children. Never direct the jet of hot water and/or steam towards yourself or others. Danger of scalding.
Do not insert objects through the appliances openings. (Danger! Electrical Current!). Do not pull out the plug by yanking on the power cord or touching it with wet hands. Warning. Danger of burning when in contact with hot water, steam and the hot water spout.

FAILURES

Do not use the appliance if a failure has been veried or suspected, for example after being dropped. Any repairs must be performed by an authorized customer service center. Do not use the appliance with a defective power cord. The manufacturer or its customer service center will have to replace the power cable if damaged. (Caution! Electrical Current!) Turn off the appliance before opening the service door. Danger of burns!

CLEANING / DESCALING

Clean the milk circuit only with the recommended detergent powder supplied with the machine. Carefully follow the safety instructions given on the packaging. Clean the coffee circuit only with the recommended detergent tablets supplied with the machine. Carefully follow the safety instructions given on the packaging. Before cleaning the machine, the main switch must be turned to OFF (0), unplugged from the socket and cooled down. Keep the appliance from coming into contact with splashes of water or immersing in water. Do not dry the machines parts in conventional or microwave ovens. The machine and its components must be cleaned and washed after the machine has not been used for a certain period.

REPLACEMENT PARTS

For safety reasons, use only original replacement parts and original accessories.

WASTE DISPOSAL

- The packing materials can be recycled. - Appliance: unplug the appliance and cut the power cord. - Deliver the appliance and power cord to a service center or public waste disposal facility This product complies with EU Directive 2002/96/EC. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city of ce, your household waste disposal service or the shop where you purchased the product.

FIRE SAFETY

In case of re, use Carbon Dioxide extinguishers (CO 2). Do not use water or dry-powder extinguishers.
ADDITIONAL INFORMATION FOR CORRECTLY USING THE AQUA PRIMA FILTER.
Please follow these simple instructions to correctly use the Aqua prima lter: 1. Keep the Aqua prima lter cool and away from sunlight; the room temperature should be between +5C and +40C; 2. Do not use the lter in temperatures over 60C. 3. If the coffee machine is not used for 3 days, we recommend washing the Aqua prima lter; 4 If the coffee machine is not used for more than 20 days, it is advisable to replace the lter. 5. To store an already opened lter, seal it in a nylon bag and keep in the fridge; do not store it in the freezer to avoid damaging the lter properties. 6. Before using the lter, leave it to soak in the water tank for 30 minutes. 7. Once it is taken out of its pack, do not keep the lter in the open air. 8. The lter must be replaced 90 days after opening the packing or after treating 60 litres of drinking water.

Primea: A Masterpiece in Design and Innovation
Saeco, the world leader in automatic espresso machines, offers you an ultra automatic machine producing maximum taste with a bold and impressive statement. Thanks to superior innovations in design and technology, the Primea line prepares espresso with perfect crema, aroma and flavor every time. Prepare every type of coffee to appeal to your senses, such as espresso, cappuccino, latte macchiatto and many more. The Primea line combines exclusive technology with top of the line style and sophistication. The Saeco Advantage: Advanced Display Panels: A large color touch screen with sensitive touch technology or a LCD display screen with click-wheel technology both allow you to easily operate and program your machine. Touch2Cappuccino: Prepare two cappuccinos with just one touch with the built-in Cappuccinatore. Saeco Brewing System (SBS): Make an infinite variety of coffees from one machine with just the twist of a dial. Cup Illumination: A soft light will turn off and on with just the touch of a button to spotlight the drink being brewed.
Features Display Programmable Drink Options Temperature Control Cup Warming Surface Removable Brew Group Automatic Decalcifying Cycle Rapid Steam Insta Steam Frothing Device Touch2Cappuccino Cup Illumination Hot Water Dispenser Saeco Brewing System (SBS) Saeco Aroma System Saeco OptiDose Built-In Grinder Adjustable Grinder Pre-Ground Bypass Doser Adjustable Dispensing Head Adjustable Drip Tray Base Removable Water Tank Aqua Prima Water Filter Bean Hopper Capacity Used Grounds Capacity Boiler Material Machine Housing Unit Size Unit Weight UPC Code Warranty MSRP
Primea Touch Plus color touch screen 6 beverages
Primea Ring LCD display 6 beverages

active

Cappuccinatore (built-in)
7 - 10.5 gr. capacity ceramic disc
motorized sliding wheels 62 oz
10 oz 24 pucks stainless steel ABS plastic 14W x 18D x 15H 33 lbs. 7-08461-80000-year
10 oz 24 pucks stainless steel ABS plastic 14W x 18D x 15H 33 lbs. 7-08461-00002-year
For more information, please contact: Saeco USA 7905 Cochran Road, Suite 100, Glenwillow, OH 44139 Tel: (800) 933-7876 Fax: (440) 542-9173 www.saeco-usa.com
Talea: A New Line of Taste.
From any point of view, the Talea line is a delight to your eyes and your tastebuds. Exclusively designed by BMW Designworks USA, the Talea line features the elegant color combination of silver and titanium. All the traditional tastes of Saeco are included in these new machines with an ergonomic shape and advanced technology. The stunning exterior and high-tech interior make all of the Talea models a pleasant delight.
The Saeco Advantage: Milk Island: The Milk Island prepares a creamy froth in just a few seconds with the simple twist of a dial. User Friendly Interface: Brew the perfect espresso easily at the touch of a button. Rapid Steam: Rapid Steam technology reduces normal waiting time between brewing coffee and steam output to just a few seconds. Cup Warming Surface: Keep your cups and espresso at an optimal temperature while enhancing the full flavors and aromas extracted from the coffee beans.
Talea Touch b/w touch screen 3 beverages
Talea Ring Plus LCD display 3 beverages
Talea Giro indicator lights passive
Milk Island & Pannarello -
Milk Island (optional) & Pannarello -
motorized sliding wheels 57 oz
manual sliding wheels 57 oz
8 oz 14 pucks stainless steel ABS plastic 13W x 16D x 14.5H 21 lbs. 7-08461-00016-year
8 oz 14 pucks stainless steel ABS plastic 13W x 16D x 14.5H 21 lbs. 7-08461-00017-year

8 oz 14 pucks stainless steel ABS plastic 13W x 16D x 14.5H 21 lbs. 7-08461-00018-year

Espresso Italiano Line

Bringing the caf into your own home has never been easier than with the Espresso Italiano. Just add whole beans and water, and instantly you will have a perfectly extracted espresso. With state-of-the-art technology, including a tri-colored digital display screen that helps to easily identify the machines functions, you can make all of your favorite espresso-based drinks, including cappuccino, latte and Americano. Every cup of coffee is freshly ground, dosed, tamped, and brewed with consistent high quality in one cycle, all at the push of a button. The Saeco Advantage: OptiDose: Adjustable 6-9 gram doser to regulate the amount of beans to grind per serving. Conical Burr Grinder: With automatic shut-off, the built-in conical burr grinder is the optimal way to grind beans. Rapid Steam: No waiting between frothing milk with the Pannarello attachment and brewing espresso. Easy Clean System: Fully extractable brew group grinds, doses, tamps, brews and discards used grounds internally.
Espresso Italiano tri-colored digital display 2 -

Pannarello -

6 - 9 gr. capacity conical burr
swivel base 57 oz optional 8 oz 14 pucks stainless steel ABS plastic 13W x 19D x 14.5H 20 lbs. 7-08461-10004-year

Odea: Meet the Future.

The Odea line is characterized by a new touch of purity. Its design is made to please all coffee lovers, who prefer a beautiful, stream-lined style. The parts of the machine are prominently placed to simplify every choice in the coffee making process. The Odea line is built with Saeco quality, and technical innovations that are truly state of the art. Dressed to impress, these models are just hot.
The Saeco Advantage: Steam/Hot Water Wand: The long Pannarello steam wand can froth milk in almost any sized container, and also dispenses hot water. Giro Interface: It is easy to choose the amount and aroma of coffee to brew with just one turn of the dial. Adjustable Drip Tray: The manual drip tray is easily raised or lowered with just a light push. Ceramic Disc Grinder: Provides an even, consistent grind every time.
Odea Giro (Grey) indicator lights passive
Odea Giro (Orange) indicator lights passive
Odea Go indicator lights passive

ceramic disc

manual sliding wheels 50 oz optional 6 oz 14 pucks stainless steel ABS plastic 11.5W x 15D x 14.5H 19 lbs. 7-08461-00022-year
manual sliding wheels 50 oz optional 6 oz 14 pucks stainless steel ABS plastic 11.5W x 15D x 14.5H 19 lbs. 7-08461-00032-year

-. manual sliding wheels 50 oz optional 6 oz 14 pucks stainless steel ABS plastic 11.5W x 15D x 14.5H 19 lbs. 7-08461-00021-year

The Royal Line

Bring the coffeehouse directly into your business or small office with Saecos super automatic Royal line of espresso machines. With all of the programmable features available, the Royals are some of Saecos most impressive machines. The LCD display and programmable push-button technology make it easy for anyone to become a barista. Whole beans are perfectly ground, tamped, brewed and discarded into a used grounds container. Use the steam wand or the built-in Cappuccinatore to easily froth milk directly into your cup.
The Saeco Advantage: LCD Display: Program up to three drink buttons with the easy-to-read interface. Conical Burr Grinder: With automatic shut-off, the built-in conical burr grinder is the optimal way to grind beans. Cappuccinatore Frothing Attachment: Automatically steam and froth milk directly into your cup. Easy Clean System: Fully extractable brew group grinds, doses, tamps, brews and discards used grounds internally.
Royal Coffee Bar LCD display 3 beverages
Royal Professional LCD display 3 beverages
Cappuccinatore & Pannarello -
swivel base 82 oz tank or 3/4 plumbed line optional 10 oz 15 pucks stainless steel metal 15.2W x 15.8D x 19.2H 35 lbs. 7-08461-10055-year
swivel base 82 oz tank optional 10 oz 15 pucks stainless steel metal 15.2W x 15.8D x 19.2H 35 lbs. 7-08461-12110-year

Incanto Line

The Incanto line of super automatic espresso machines feature innovative Saeco technologies including three programmable brew settings and ceramic disc grinders. The Saeco Brewing System makes it easier than ever before to customize and brew espresso at home. Thanks to the Rapid Steam technology, you can easily froth milk to quickly turn your espresso into a cappuccino or latte. The elegant finish and compact footprint make the Incanto line a perfect fit for any kitchen.
The Saeco Advantage: Programmable Brew Settings: Program up to three drink buttons with the easy-to-read interface. Ceramic Disc Grinder: With automatic shut-off, the built-in grinder is safe, quiet and long-lasting. Saeco Brewing System: Make an infinite variety of coffees from one machine with just the twist of a dial. Rapid Steam: Rapid Steam technology reduces the normal waiting time between brewing coffee and steam output to just a few seconds.

Incanto Deluxe LCD display 3 beverages
Incanto Classic indicator lights 2 beverages active
6 - 12 gr. capacity ceramic disc

swivel base 68 oz

10 oz 13 pucks stainless steel metal 12W x 15.5D x 15H 26 lbs. 7-08641-30091-year
10 oz 13 pucks stainless steel metal 12W x 15.5D x 15H 26 lbs. 7-08461-30020-year

Spidem Line

Bringing the caf into your own home has never been easier with the Spidem Villa by Saeco. Just add whole beans and water, and instantly you will have a perfectly extracted espresso. With state-of-the-art technology, you can make all of your favorite espresso-based drinks, including cappuccino, latte, and even regular-strength coffee. Every cup of coffee is freshly ground, dosed, tamped, and brewed with consistent high quality in one cycle, all at the push of a button.
The Saeco Advantage: Coffee Dial Control: Dial display easily adjusts the preferred amount of brewed coffee for each cup. Conical Burr Grinder: With automatic shut-off, the built-in conical burr grinder is the optimal way to grind beans. Pannarello Steam Wand: Quickly steam and froth milk for cappuccinos and lattes perfectly. Easy Clean System: Fully extractable brew group grinds, doses, tamps, brews and discards used grounds internally.
Spidem Villa (Silver) indicator lights -
Spidem Villa (Black) indicator lights -
swivel base 57 oz optional 12 oz 15 pucks stainless steel ABS plastic 15W x 14D x 15.5H 18 lbs. 7-08461-10003-year
swivel base 57 oz optional 12 oz 15 pucks stainless steel ABS plastic 15W x 14D x 15.5H 18 lbs. 7-08461-10004-year

Traditional Line

The traditional line of espresso machines is perfect for those who love the nitty gritty ritual of making an espresso. Each machine is equipped with a pressurized portafilter and an optional pod adapter for the choice of using ground coffee or pre-packed ESE pods for brewing. The Pannarello steam wand froths milk consistently for the perfect cappuccino or latte every time.
The Saeco Advantage: P ressurized Portafilter: The patented filter holder pressurizes the brewing chamber, ensuring a great extraction of espresso. Pannarello Steam Wand: Used to manually froth milk for cappuccinos and lattes. Also produces hot water for tea. ESE Pod Adapter Capability: A pod adapter and special filter basket enable the portafilter to handle single serve prepackaged shots (pods). Cup Warming Surface: Comfortably holds espresso cups and is heated by the residual heat of the boiler.
Features Pressurized Portafilter Pannarello Steam Wand Plug-In Cappuccinatore Pod Adaptable Filter Holder Cup Warming Surface Hot Water Dispenser Dual Spout Dispensing Head Removable Water Tank Water Tank Capacity Boiler Pump Pressure Machine Housing Unit Size Unit Weight UPC Code Warranty MSRP

Magic Cappuccino Plus

included

optional

passive
68 oz stainless steel 15 bar ABS plastic 9.5W x 11D x 14H 13.5 lbs. 7-08461-00033-year
85 oz stainless steel 15 bar metal 8W x 10D x 11.75H 14 lbs. 7-08461-00035-4 (SS) 7-08461-00034-7 (Blk) 1 year

450-$400

Nina Line
The new Nina series of espresso machines completes the BMW-designed Saeco line with sleek lines, compact construction and a modern color palette. These traditional machines are equipped with a stainless steel boiler, a pressurized portafilter, and an optional pod adapter to choose between ground coffee or pre-packed ESE coffee pods. The Pannarello steam wand or Cappuccinatore froths milk consistently for the perfect cappuccino or latte every time. The Saeco Advantage: P ressurized Portafilter: The patented filter holder pressurizes the brewing chamber, ensuring a great extraction of espresso. Pannarello Steam Wand: Used to manually froth milk for cappuccinos and lattes. Also produces hot water for tea. ESE Pod Adapter Capability: A pod adapter and special filter basket enable the portafilter to handle single serve prepackaged shots (pods). Cup Warming Surface: Comfortably holds espresso cups and is heated by the residual heat of the boiler.
Features Display Pressurized Portafilter Pannarello Steam Wand Plug-In Cappuccinatore Pod Adaptable Filter Holder Cup Warming Surface Hot Water Dispenser Dual Spout Dispensing Head Removable Water Tank Water Tank Capacity Boiler Pump Pressure Machine Housing Unit Size Unit Weight UPC Code Warranty MSRP

Nina Bar touch interface

Nina Cappuccino coffee dial

Nina coffee dial

50 oz stainless steel 15 bar metal 11W x 12D x 14H 9 lbs. 7-08461-00038-year
50 oz stainless steel 15 bar ABS plastic 11W x 12D x 14H 9 lbs. 7-08461-00040-year
50 oz stainless steel 15 bar metal 11W x 12D x 14H 9 lbs. 7-08461-00041-year

Drip Coffeemakers

Saeco, the leading manufacturer of espresso machines, is taking its passion for coffee in new directions. These urns and drip coffee products join the industry leaders highly successful product lines that include automatic and traditional home espresso machines, professional and foodservice equipment, vending machines and coffee accessories. Renaissance Coffee Urn: While bringing the knowledge of proper brewing techniques to larger volume customers and events, the Renaissance Coffee Urn delivers the freshest cups of coffee to home entertaining, catering and restaurant service. Renaissance Portable Coffee Urn: Freshly brewed coffee is made even more accessible with the Renaissance Portable Coffee Urn. Holding 25 cups of coffee, this urn is perfect for family gatherings, parties or meetings. The large, heat resistant handle makes it easy to transport. Renaissance Glass: The Renaissance Glass sets out to change the way coffee lovers think of the drip coffeemaker. Combining European styling with the latest innovations, this machine makes brewing a carafe of hot, flavorful coffee easier than ever.

Renaissance Urn Large 60 Cup Capacity Heat Resistant Handle Built-In Cord Storage Stainless Steel Housing Water Indicator Tube Digital Display Control Panel Detachable Power Cord Two Way Dripless Spout Unit Size: 12.5W x 11D x 20H Unit Weight: 9.5 lbs. UPC Code: 7-08461-00098-9 Warranty: 1 year MSRP Price: $179
Renaissance Portable Urn 25 Cup Capacity Large Heat Resistant Handle Stainless Steel Housing Water Indicator Tube Digital Display Control Panel Detachable Power Cord Newly Designed Dripless Spout Unit Size: 8.75W x 11.5D x 13.5H Warranty: 1 year Unit Weight: 9.5 lbs. MSRP Price: $149 UPC Code: 7-08461-11008-4
Renaissance Glass Top Loading Filter Basket 55 oz. Top Filling Water Tank Pause n Serve Glass Carafe and Hot Plate with Keep Warm Function Built-In Cord Storage Programmable LED Control Panel Automatic Shut-Off Unit Size: 8.25W x 12.25D x 14.5H Warranty: 1 year Unit Weight: 6 lbs. MSRP Price: $149 UPC Code: 7-08461-10011-5