CLEANING AND MAINTENANCE....39
MAINTENANCE DURING OPERATION.....39 GENERAL MACHINE CLEANING....39 MILK CONTAINER MAINTENANCE AND CLEANING.....40 CLEANING THE BREW GROUP.....42 GRINDER MAINTENANCE.....43
ERROR CODES.....44 TECHNICAL DATA.....45 SAFETY RULES.....46

GENERAL INFORMATION

The coffee machine is intended for preparing espresso by using either coffee beans or ground coffee. It includes an automatic device for preparing milk beverages and a hot water dispenser. The machine is elegantly designed for domestic use and is not suitable for continuous heavy duty or professional use. Warning: no liability is assumed for any damage caused by: Incorrect use not in accordance with the intended uses; Repairs not carried out by authorized customer service centers; Tampering with the power cord; Tampering with any part of the machine; The use of non-original spare parts and accessories; Failure to descale the machine or use at temperatures below 0C.
IN THESE CASES, THE WARRANTY IS NOT VALID.
A WARNING TRIANGLE DRAWS ATTENTION TO ALL THE INSTRUCTIONS THAT ARE IMPORTANT FOR USER SAFETY. PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY TO AVOID SERIOUS INJURY!
HOW TO USE THESE OPERATING INSTRUCTIONS
Keep these operating instructions in a safe place and make them available to anyone else who may use the coffee machine. For further information or if you experience problems not completely or sufciently addressed in these instructions, please contact an Authorized Customer Service Center.

KEEP THESE INSTRUCTIONS

MACHINE
Open coffee bean hopper button Cup warming plate TOUCH SCREEN Display SBS Dispensing head Drip tray + grill and oat Service door Coffee grounds drawer Coffee bean hopper Coffee bean hopper cover Compartment for preground coffee Main switch
Compartment for milk container Button for raising/lowering the drip tray Milk compartment button Hot water spout
Water tank Socket for power cord

Brew group Drip tray

ACCESSORIES

Grinder adjustment key

C Cappuccinatore i t maintenance kit

Intenza water lter

Water hardness tester
Lubricant for the brew group
Cleaning detergent (Brew group)
Detergent for cleaning milk container
Ground coffee measuring scoop

INSTALLATION

STARTING THE MACHINE
Make sure that the main power button is not switched to the ON position.
Press the button on the coffee hopper to open the cover. Fill the hopper with coffee beans.
Close the cover pushing it down completely.
Remove the water tank. We recommend installing the water lter (see page 7).
Fill the tank with fresh drinking water. Do not exceed the max level indicated on the water tank. Once lled place the tank back into the machine.
Attach the female end of the power cord to the machine. Insert the male end into the power outlet.

CHOOSE COFFEE AROMA

The intensity of the color on the cup icon (only valid for coffee beverages) indicates the aroma, or quantity of coffee to be ground, for preparing the beverage. The greater the quantity of coffee ground the stronger the coffee will taste.

medium

strong
When the machine is programmed to use pre-ground coffee or when a beverage is customized, the icon is displayed in a different way and/or accompanied by an asterisk (see section on programming beverages.)

pre-ground

customization

ADJUSTMENTS

COFFEE INTENSITIY
The SBS system has been carefully designed to give your coffee the intense taste you desire. Simply turn the dial and you will notice that the coffee goes from mild intensity to strong intensity. MEDIUM COFFEE

SBS SAECO BREWING SYSTEM

SBS adjusts the intensity of the brewed coffee, and can even be adjusted while brewing. Any adjustment has an immediate effect on the brewing coffee.

MILD COFFEE

STRONG S COFFEE C
ADJUSTING THE HEIGHT OF THE DRIP TRAY
Adjust the drip tray before dispensing any beverages. Height adjustable drip tray. To raise the drip tray, press lightly on the lower part of the button. To lower the tray, press lightly on the upper part of the button; when the desired height is reached, release the button. Note: There is a red oater in the drip tray. When it rises, the tray must be emptied and washed.
FILLING THE MILK CONTAINER
Only the container with the cappuccinatore must be lled before preparing beverages with milk. Do not use milk after the best-before date. (Important! Refer to the instructions for maintenance and cleaning of the cappuccinatore on page 40).
Open the milk compartment by pressing the button and remove the milk container.
Remove the cover and pour in the milk. DO NOT EXCEED THE MAXIMUM LEVEL shown in the gure.
Replace the lid on the container and place it back in the milk compartment. Make sure to carefully close the compartment.

BEVERAGE DISPENSING

DISPENSING COFFEE, HOT WATER AND MILK CAN BE INTERRUPTED AT ANY TIME BY SELECTING THE "STOP. DISPENSING" BUTTON. THE DISPENSED MILK CAN REACH HIGH TEMPERATURES: THERE IS A DANGER OF SCALDING. DO NOT TOUCH IT WITH BARE HANDS. THE MILK USED MUST HAVE BEEN PROPERLY PRESERVED. DO NOT USE IT AFTER THE EXPIRATION DATE ON THE PACK AGE.

Check that all the containers are clean. To do this operation, follow the instructions in the "Cleaning and Maintenance" (see page 39).
WHEN YOU HAVE FINISHED PREPARING BEVERAGES CONTAINING MILK, PROCEED WITH CLEANING THE CONTAINER AND THE MACHINE'S CIRCUIT.
To brew 2 cups, the machine dispenses half of the entered quantity and briey interrupts dispensing in order to grind the second serving of coffee. Coffee dispensing is then restarted and completed.If a milk beverage has been chosen, the machine automatically dispenses the milk. If the rst coffee is interrupted, the second will not be dispensed.
ESPRESSO / COFFEE / LONG COFFEE
This procedure shows how to dispense an espresso. To dispense another type of coffee, press the appropriate icon. Use appropriate espresso or coffee cups so that the coffee will not overow.

espresso

stop coffee dispensing
show icon explanation my custom coffee programming menu
Choose the beverage and press the corresponding icon on the display: once for 1 cup and twice for 2 cups.
The machine begins grinding the quantity of coffee entered.
Begin dispensing the selected beverage.
The machine ends dispensing automatically according to the quantity determined by the manufacturer. It is possible to customize this quantity. See page 15. If you wish to interrupt the dispensing cycle, press the " stop coffee dispensing" button.
DISPENSING BEVERAGES WITH GROUND COFFEE
Pre-ground coffee must be poured into the appropriate compartment positioned next to the coffee bean hopper. Pour in only coffee ground for espresso machines and never coffee beans or instant coffee. (see the "Beverage programming" chapter on page 15). WARNING: PUT PRE-GROUND COFFEE IN THE COMPARTMENT ONLY WHEN YOU WISH TO DISPENSE THIS TYPE OF BEVERAGE. INSERT ONLY ONE SCOOP OF GROUND COFFEE AT A TIME. TWO CUPS OF COFFEE CANNOT BE DISPENSED AT THE SAME TIME. In the example given below, we chose to dispense a long coffee using pre-ground coffee. The customized choice of using pre-ground coffee is shown on the display with an asterisk next to the chosen beverage.
add preground coffee start!
Press the appropriate button and the display will show:
A message appears, reminder the user to pour ground coffee in the appropriate compartment.
Pour ground coffee into the preground coffee compartment using the measuring scoop provided with the accessories.

long coffee

stop coffee dispensing go back
Press the "start! "button to start dispensing.
Begins dispensing the selected beverage.
Note: After 1 minute from when the message appears (2), if brewing has not started the machine will return to the main menu and dump any inserted coffee into the coffee grounds drawer. If no pre-ground coffee is poured into the compartment, only water will be dispensed. If 2 or more scoops of coffee are added, the machine will not dispense the beverage and the coffee in the compartment will be dumped into the coffee grounds drawer.

my espresso

start!

preground

return to the previous window.
select the use of pre-ground coffee.

restore settings

save settings
Enter the menu of the beverage to be customized by pressing and holding the button for 2 seconds.
restore factory settings.

save settings.

Selecting a different quantity of coffee changes the aroma of the beverage.

3 light

4custom coffee
After pressing the start! button, the brew cycle will start.

preground amount

Pressing start! allows the machine to brew coffee.

custom coffee amount

The machine automatically starts and nishes brewing the coffee, according to the standard settings.
To brew an amount of coffee greater than that preset by the manufacturer, press custom coffee amount before the end of the brew cycle in progress. When the quantity is reached, press stop coffee dispensing.
The brew cycle may be interrupted only by pressing stop coffee dispensing. If the button is not pressed, the coffee can overow in the cup.
If the "save settings" button is not pressed the machine returns to the main menu and the customized settings will not be saved.

saved!

Once the brew cycle nishes, press "save settings" within ve seconds.
The display shows the conrmation of the memorized settings, and the machine automatically returns to the main menu. Fill the milk tank In this menu you can: 2 light my latte

macchiato

PROGRAMMING MILK BEVERAGES
select the quantity of coffee to be ground.

my latte macchiato

custom milk amount
Pressing start! allows the machine to start the brewing cycle.
The machine automatically starts and nishes dispensing the milk, according to the standard settings.

5 custom coffee

amount

6custom coffee

The dispensing cycle may be interrupted only by pressing stop milk dispensing. If the button is not pressed, the milk may overow.

To dispense an amount of milk greater than that preset by the manufacturer, press custom milk amount before the end of the dispensing cycle in progress. When the quantity is reached, press stop milk dispensing.
The brew cycle may be interrupted only by pressing stop coffee dispensing. If the button is not pressed, the coffee may overow.
To brew an amount of coffee greater than that preset by the manufacturer, press custom coffee amount before the end of the brew cycle in progress. When the desired quantity is reached, press stop coffee dispensing. If the "save settings" button is not pressed the machine returns to the main menu and the customized settings will not be saved.
The display shows the conrmation of the saved settings, and the machine automatically returns to the main menu.

PROGRAMMING THE MACHINE

Some of the machines functions can be programmed to customize operations according to your own requirements.
Press the "programming menu" button. The programming menu will access: Programming the machine operations (see page 18) Special functions (see page 38) Maintenance (cleaning the machine) (see page 27)
machine settings beverage settings
In depth beverage programming (see page 22) Extra functions (see page 24) - Current date and time - Standby timer - Times to turn on/turn off over the span of a day (see page 34).

specials

Activate standby
After having set each of the following menus, press - "go back" to return to the previous screen - "restore default settings" to restore the initial values - "save settings" to save the settings - "back to menu" to return to the main menu

MACHINE SETTINGS

When the machine settings are selected the following screen appears. Here you can: set the illuminate cups function. set the language of the menus. set the brightness of the display colors. set/activate the tones.
cup illumination water lter water hardness
set the machine operation through the water lter set the water hardness. set the circuit rinse cycle.

To clean the internal circuits for coffee brewing in order to guarantee that beverages are brewed with fresh water only. In this menu you can:
Note: This rinse cycle is performed every time the machine is turned on when it is cool.
deactivate the rinse cycle.
activate the rinse cycle.

CUP WARMING PLATE MENU

To activate the cup warming plate on the upper part of the machine. In this menu you can:

always on

keep the cup warming plate always on.
keep the cup warming plate off when the machine is in stand-by.

off in standby

keep the cup warming plate always off.
ACOUSTIC TONES AND ALARMS MENU
To activate/deactivate the machines acoustic tones. Pressing the button does not immediately change the status.
alerts & acoustic settings

machine ready tone

milk quality alert
activate/deactivate a machine ready tone. activate/deactivate a tone each time a button is pressed.

key tones

milk rinsing alert
activate/deactivate a tone that reminds the user to proceed with washing the circuits to prepare milk. activate/deactivate a tone that reminds the user to perform the rinse cycle of the milk circuits (the tone is activated after one minute from the beverage brewing).
Note: The tones are divided in the following way: Long continuous tone indicates a machine malfunction; Brief tone when a button is pressed and to indicate that the machine is ready for use; Intermittent tone to indicate that the machine needs to be cleaned.

DISPLAY MENU

To set the correct brightness of the display colors, press the display button.

display

Adjust the brightness by pressing + or restore default settings save settings back to menu

BEVERAGE SETTINGS

To adjust the general brew parameters of the various beverages containing coffee, press the beverage settings button on the main menu.
espresso espresso macchiato

coffee long coffee

latte macchiato cappuccino
For every single beverage, you can adjust:

temperature

the coffees brew temperature.

coffee settings

prebrewing

strength

the coffees pre-brewing.

normal

the quantity of coffee to be ground and the use of pre-ground coffee.
The current programming status is indicated according to each parameter.
ADJUSTMENT OF THE COFFEE BREW TEMPERATURE
To set the temperature for preparing coffee, press the temperature button and select the desired temperature.
low temperature medium temperature high temperature

coffee temperature

restore default settings save settings back to menu
AROMA ADJUSTMENT FOR COFFEE BREWING

To set the Aroma function, that is to say the quantity of coffee to be ground, and to set the use of pre-ground coffee. You can have your beverage with the quantity of coffee you desire or you can choose to prepare it with decaffeinated coffee by using the preground function.

strenght

light medium strong

coffee strength

PREBREWING ADJUSTMENT (ONLY COFFEE BEVERAGES)
To set the prebrewing function. The coffee is slightly dampened before brewing, bringing out the full aroma of the coffee and extracting the best avor.
normal prebrewing strong prebrewing (longer) deactivate prebrewing

coffee prebrew

ADDITIONAL FUNCTIONS
There are some additional functions of the machine. Pressing the extras button allows you to access the menu and the following message will appear on the display.
In this menu you can: access the menu where some of the most famous recipes in the world are kept.

coffee of the world demo

activate the demo function to show the machines main functions.
view the quantities of every type of product brewed.

beverage counters

go back restore default settings save settings back to menu
COFFEE OF THE WORLD FUNCTION
This function allows the user to prepare coffee according to the most famous recipes in the world.

coffee of the world

In this menu you can: prepare a typical American coffee. prepare a true Italian ristretto. prepare a typical Italian espresso. prepare a typical North European coffee. prepare a typical French/ Swiss coffee. prepare a avorful latte macchiato without the fear of not being able to sleep.
ristretto espresso italiano

american coffee

good morning coffee
caf creme good night milk
prepare a coffee for a day full of energy.
If, for example, you want to taste a typical American coffee, you must press the American coffee button. In this case, the following message appears in the display.
the position of the SBS knob is shown with the best cup size to use
Pressing the go! button starts the brewing process.

After brewing the desired beverage, it can be saved on one of the icons of the main menu.
do you want to save this beverage?
return to the recipe preparation menu

save the beverage

To save the beverage you just made, the display shows the icon that allows this function. This message remains active for approximately 5 seconds and then returns to the main message.
is now saved under the icon
The beverages in the Coffee of the World function, if saved, will be associated with the following buttons, and accompanied by an asterisk: ristretto: Italian espresso: coffee: caf crme: American coffee: good morning coffee: good night milk: espresso (small cup) espresso (small cup) coffee (medium cup) coffee (medium cup) long coffee (glass) espresso (small cup) latte macchiato
choose an icon to brew it
You can associate only one beverage with a single icon. The original settings can be restored using the Beverage Settings menu.

DEMO MODE

This function shows the machines potential.
Note: When this function is activated, the machine is in stand-by and all the functions are disabled. The demo mode is saved even when the machine is turned off by the main switch. The next time the machine is turned on, the machine will still be in the demo mode. Pressing the demo button on the display shows:

leave demo mode?

no yes
This is the way the demo mode operation begins. The messages that follow illustrate the machines functionality. To exit this mode, press anywhere on the display.

continue the tour

exit and activate the machines normal functions
BEVERAGE COUNTER FUNCTION
This function shows how many beverages have been prepared for every single type of beverage.
hot milk latte macchiato cappuccino espresso macchiato hot water coffee long coffee espresso 0 0

MAINTENANCE

To clean/maintain all of the machines internal circuits, press the maintenance button on the main menu. In this menu you can: lock the Touch Screen (to preform cleaning of the display). begin washing the milk circuits. begin rinsing the milk circuits.
lock display milk cleaning cycle milk circuit rinsing cycle

coffee cleaning cycle

begin the wash cycle of the brew group.

DESCALING

To perform the automatic descaling cycle. Descaling is necessary every 3-4 months, according to the water hardness, when water comes out more slowly than normal or when the machine indicates it. The machine must be turned on and will automatically manage the distribution of the descaling agent. A PERSON MUST BE PRESENT DURING THE OPERATION. WARNING! NEVER USE VINEGAR AS A DESCALER. Saeco descaler is recommended, however you can use a non-toxic and/or non-harmful descaling product for coffee machines, commonly available online or in coffeeshops. The solution used must be disposed of according to the manufacturers instructions and/or according to the regulations enforced in the country of use. Note: Before beginning the descaling cycle make sure that: 1. a large enough container is positioned under the water spout and the brew head. 2. THE WATER FILTER HAS BEEN REMOVED. 3. the water tank has been lled with the descaling solution up to the level indicated with an
Pause descaling. The descaling and/or rinsing can be paused and then restarted. When descaling is interrupted the machine will warn the user that it must be turned off. WARNING! DESCALING MUST BE COMPLETED WITHIN 24 HOURS FROM ITS INTERRUPTION. The next time the machine is turned on, the machine will warn the user that the descaling and/or rinse process must be completed.
descaling cycle ll the water tank with descaling solution

start descaling

descaling 200
The machine indicates to the user the need to complete the descaling through the message on the main menu. This does not block the machines operation. The number under the message indicates the number of beverages that can be dispensed before the machine needs to be descaled. 30 beverages before descaling, the button will begin to ash. When the number reaches zero, the machine must be descaled. Pressing the descaling button accesses the descaling menu.
When in the descaling menu, the message ll the water tank with descaling solution appears on the display. Perform the descaling cycle by pressing start descaling as shown.
In order to run a descaling cycle before the machine indicates the necessity to do so, press the button "descaling cycle" and then "start descaling" to start the descaling cycle.
descaling cycle start descaling
descaling cycle please wait

descaling.

pause descaling
The machine begins to dispense the descaling solution through the hot water spout. The dispensing occurs at preestablished intervals, in order to allow the solution to be more effective.
insert the water tank with fresh water
rinsing ciclo di risciacquo cycle
When the solution is nished the following message appears on the display:
Remove the water tank and rinse with fresh drinking water to eliminate traces of descaling solution. Then, rell with fresh drinking water and reinsert water tank.

Rinse the machine circuits by pressing "start rinsing".

pause rinsing

The machine performs the rinse cycle. At the end of the rinse cycle ll the tank with fresh drinking water. Before lling the tank reinsert, if desired, the water lter again, or reinsert the small white lter (see page 7).
Put a container under the water spout. When the water tank is inserted the machine automatically proceeds to prime the water circuit. If this operation is not successful, consult "manually priming the circuit" (see page 6)

CLOCK SETTINGS

To adjust the current date and time, the timer for stand-by (energy savings) and the times for automatically turning on and turning off the machine. Press the "clock settings" button on the main menu. In this menu you can:

time settings

clock settings
set the parameters for stand-by after the last brew.

energy saving settings

set - the current time - the current date - the view format (24 hour AM/PM) set the intervals for turning the machine on and off (three intervals that can be activated separately).

TIME SETTING

To set all the parameters relating to the clock and calendar. Important: To correctly program the times for turning the machine on and off, press the timer settings button.

time weekday

current time

09:45 (am)

modify the settings related to the current time and the day of the current week.
view the current time setting. view the current day of the week setting. view the current time format setting.

time format

current weekday

thursday

current format
modify the settings relating to viewing the time (in 24 hour or am/pm format).
Current time/day of the week
To set the day of the week and the current time on the machine. Press the "time/weekday" button. In this menu you can:

time weekday 09h (am)

43 min
Adjust the hour by pressing + or Adjust the minutes pressing + or Adjust the day pressing or

weekday

go back save settings

Time format

To set the time view mode. This setting adjusts all clock functions to either am/pm or 24 hour formats. To set the time view mode, press the time format button. The modicatino is immediately applied and in small writing appears am/pm or 24 hour.

AUTOMATIC TIMER SETTINGS

With this function you can turn on (activate) and turn off (energy savings) the machine at the desired times. Remember that the machine manages this function only if it is turned on.
In this menu you can: set the rst interval for turning on

setting 1

on 07:00 am off 09:00 am

setting 2

on 12:00 pm off 14:00 pm
set the second interval for turning on

select a timer setting

setting weekday
choose on what days the intervals are active

setting 3

on 17:00 pm off 19:00 pm
set the third interval for turning on
To correctly program the automatic timer settings, you must: - set the individual intervals for turning on and turning off the machine. - choose on which days to apply these auto on/off intervals. It is recommended to not overlap intervals for turning on the machine.
Setting an interval for turning on the machine
In order to program an interval for turning on the machine, press the button for the interval that you wish to set.

08h (am)

Adjust the hour to turn on by pressing + or -

turn machine on

15 min
save settings back to menu
Adjust the minutes by pressing + or -
To save the adjusted settings and go to the next screen

09h (am)

Adjust the hour to turn off by pressing + or -

turn machine off

To save the adjusted setting
For every day, choose the intervals for turning on
Arrow through the days of the week, and for each day, select the automatic timer intervals you wish to activate.
Interval not active for the selected day
Interval active for the selected day

edit weekday timer

monday
Select the day by pressing or
To save the settings Each day you can select various intervals.

ENERGY SAVING SETTINGS

To set after what duration of time, from the last dispensed beverage, the machine will go into stand-by mode. The default setting is "after 3 hours".

energy saving setting

after 15 min

after 30 min

standby setting

after 3 hours

Select the desired time to activate stand-by.

after 1 hour

When the selected duration of time has passed, the display reads stand-by.

energy saving

To activate the machine, press start. After having performed the function diagnostics and the heating up phase, the machine is once again ready for use.

SPECIAL

GUIDE MESSAGE THAT APPEARS restart the machine call assistance insert drip tray close coffee bean container add ground coffee
insert brew group insert dreg drawer empty dreg drawer
close side door rell water tank empty drip tray insert the milk container prime the machine
In order for the machine to operate, the side door must be closed. The tank must be removed and relled with fresh drinking water. Open the side door and empty the drip tray under the brew group. Insert the milk container in its compartment. Press on the display in order to proceed with manually priming the water circuit. The machine performs an automatic attempt to prime the circuit. If this attempt does not perform correctly you must proceed with these instructions. Contact the customer service center (toll free number) to request assistance on how to resolve the problem. Repeat the operation as described in the descaling section. see page 13 and 27. see page 13 and 28.
circuit priming failure the descaling cycle has not been completed correctly milk rinsing milk cleaning
ERROR CODES / TECHNICAL DATA
GUIDE MESSAGE THAT APPEARS change water lter HOW TO REMOVE THE MESSAGE
The water lter must be replaced in the following cases: 1. 60 liters of water has been dispensed; 2. 60 days have passed since its installation; 3. 20 days have passed and the machine has not been used. Note: this message appears only when "inserted" has been selected in the water lter function (See page 19). Repeat the operation as described in the appropriate section. Insert the cappuccinatore in the milk container. Without the cappuccinatore, milk-based beverages cannot be dispensed. Close the milk compartment in order to dispense the beverage. The user must wash the milk tank after it has been used. A descaling cycle must be performed on the machine's internal circuits. Press the "start" button
the cleaning cycle has not been completed correctly insert milk container with cappuccinatore

Close milk container drawer rinse the milk tank descale the machine energy saving

TECHNICAL DATA

Nominal voltage Power rating Power supply Shell material Size (w x h x d) Weight Cable length Control panel Water tank Milk Tank Coffee Bean Hopper Capacity Pump pressure Boiler Coffee grinder Pressure safety device Temperature safety device See label on the appliance See label on the appliance See label on the appliance Plastic 355 x 380 x 460 mm - 13.8 x 15.4 x 16.Kg - 30.9 lbs 1200 mm - 42.2 (Digital) Front 2 liters - 68 oz. / Removeable ca. 0.400 liters - 12.5 oz. / Removeable 350 grams - 8.9 oz. / of coffee beans 15 bar Two in stainless steel With ceramic grinders Boiler pressure safety valve Boiler thermostats and thermal fuses
Subject to engineering and manufacturing changes due to technological developments. The machine conforms to the European Directive 89/336/EEC (Italian Legislative Decree 476 dated 04/12/92) concerning electromagnetic compatibility.

SAFETY RULES

IN CASE OF EMERGENCY
Immediately unplug the cord from the outlet.

ONLY USE THE APPLIANCE

Indoors. For preparing coffee, hot water and for foaming milk. For domestic use. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
PRECAUTIONS FOR THE USE OF THE MACHINE
Do not use the machine for purposes other than those indicated above, in order to avoid danger. Do not introduce any substances other than those indicated in the instruction manual. During the normal lling of any reservoirs, all nearby reservoirs must be closed. Fill the water tank only with fresh drinking water: Hot water and/or any other liquid may damage the machine. Do not use water with carbon dioxide added. Do not put ngers or any material other than coffee beans in the coffee grinder. Before manipulating the coffee grinder, turn of the machine's main switch and unplug the cord. Do not put instant coffee or whole bean coffee in the ground coffee container. To operate the machine with the touch screen, use only your ngers.
CONNECTION TO ELECTRICAL POWER
The connection to the electrical network must be carried out in accordance with the safety regulations in force in the user's country. The machine must be connected to a socket which is: compatible with the type of plug installed on the machine; suitably sized to comply with the ratings shown on the machine identication plate. effectively grounded. The power cord must not: come into contact with any type of liquid: danger of electric shocks and/or re; be crushed and/or come in contact with sharp surfaces; be used to move the machine; be used if damaged; be handled with damp or wet hands; be wound in a coil when the machine is being operated. be tampered with.

Primea: A Masterpiece in Design and Innovation
Saeco, the world leader in automatic espresso machines, offers you an ultra automatic machine producing maximum taste with a bold and impressive statement. Thanks to superior innovations in design and technology, the Primea line prepares espresso with perfect crema, aroma and flavor every time. Prepare every type of coffee to appeal to your senses, such as espresso, cappuccino, latte macchiatto and many more. The Primea line combines exclusive technology with top of the line style and sophistication. The Saeco Advantage: Advanced Display Panels: A large color touch screen with sensitive touch technology or a LCD display screen with click-wheel technology both allow you to easily operate and program your machine. Touch2Cappuccino: Prepare two cappuccinos with just one touch with the built-in Cappuccinatore. Saeco Brewing System (SBS): Make an infinite variety of coffees from one machine with just the twist of a dial. Cup Illumination: A soft light will turn off and on with just the touch of a button to spotlight the drink being brewed.
Features Display Programmable Drink Options Temperature Control Cup Warming Surface Removable Brew Group Automatic Decalcifying Cycle Rapid Steam Insta Steam Frothing Device Touch2Cappuccino Cup Illumination Hot Water Dispenser Saeco Brewing System (SBS) Saeco Aroma System Saeco OptiDose Built-In Grinder Adjustable Grinder Pre-Ground Bypass Doser Adjustable Dispensing Head Adjustable Drip Tray Base Removable Water Tank Aqua Prima Water Filter Bean Hopper Capacity Used Grounds Capacity Boiler Material Machine Housing Unit Size Unit Weight UPC Code Warranty MSRP
Primea Touch Plus color touch screen 6 beverages
Primea Ring LCD display 6 beverages

active

Cappuccinatore (built-in)
7 - 10.5 gr. capacity ceramic disc
motorized sliding wheels 62 oz
10 oz 24 pucks stainless steel ABS plastic 14W x 18D x 15H 33 lbs. 7-08461-80000-year
10 oz 24 pucks stainless steel ABS plastic 14W x 18D x 15H 33 lbs. 7-08461-00002-year
For more information, please contact: Saeco USA 7905 Cochran Road, Suite 100, Glenwillow, OH 44139 Tel: (800) 933-7876 Fax: (440) 542-9173 www.saeco-usa.com
Talea: A New Line of Taste.
From any point of view, the Talea line is a delight to your eyes and your tastebuds. Exclusively designed by BMW Designworks USA, the Talea line features the elegant color combination of silver and titanium. All the traditional tastes of Saeco are included in these new machines with an ergonomic shape and advanced technology. The stunning exterior and high-tech interior make all of the Talea models a pleasant delight.
The Saeco Advantage: Milk Island: The Milk Island prepares a creamy froth in just a few seconds with the simple twist of a dial. User Friendly Interface: Brew the perfect espresso easily at the touch of a button. Rapid Steam: Rapid Steam technology reduces normal waiting time between brewing coffee and steam output to just a few seconds. Cup Warming Surface: Keep your cups and espresso at an optimal temperature while enhancing the full flavors and aromas extracted from the coffee beans.
Talea Touch b/w touch screen 3 beverages
Talea Ring Plus LCD display 3 beverages
Talea Giro indicator lights passive
Milk Island & Pannarello -
Milk Island (optional) & Pannarello -
motorized sliding wheels 57 oz
manual sliding wheels 57 oz
8 oz 14 pucks stainless steel ABS plastic 13W x 16D x 14.5H 21 lbs. 7-08461-00016-year
8 oz 14 pucks stainless steel ABS plastic 13W x 16D x 14.5H 21 lbs. 7-08461-00017-year

8 oz 14 pucks stainless steel ABS plastic 13W x 16D x 14.5H 21 lbs. 7-08461-00018-year

Espresso Italiano Line

Bringing the caf into your own home has never been easier than with the Espresso Italiano. Just add whole beans and water, and instantly you will have a perfectly extracted espresso. With state-of-the-art technology, including a tri-colored digital display screen that helps to easily identify the machines functions, you can make all of your favorite espresso-based drinks, including cappuccino, latte and Americano. Every cup of coffee is freshly ground, dosed, tamped, and brewed with consistent high quality in one cycle, all at the push of a button. The Saeco Advantage: OptiDose: Adjustable 6-9 gram doser to regulate the amount of beans to grind per serving. Conical Burr Grinder: With automatic shut-off, the built-in conical burr grinder is the optimal way to grind beans. Rapid Steam: No waiting between frothing milk with the Pannarello attachment and brewing espresso. Easy Clean System: Fully extractable brew group grinds, doses, tamps, brews and discards used grounds internally.
Espresso Italiano tri-colored digital display 2 -

Pannarello -

6 - 9 gr. capacity conical burr
swivel base 57 oz optional 8 oz 14 pucks stainless steel ABS plastic 13W x 19D x 14.5H 20 lbs. 7-08461-10004-year

Odea: Meet the Future.

The Odea line is characterized by a new touch of purity. Its design is made to please all coffee lovers, who prefer a beautiful, stream-lined style. The parts of the machine are prominently placed to simplify every choice in the coffee making process. The Odea line is built with Saeco quality, and technical innovations that are truly state of the art. Dressed to impress, these models are just hot.
The Saeco Advantage: Steam/Hot Water Wand: The long Pannarello steam wand can froth milk in almost any sized container, and also dispenses hot water. Giro Interface: It is easy to choose the amount and aroma of coffee to brew with just one turn of the dial. Adjustable Drip Tray: The manual drip tray is easily raised or lowered with just a light push. Ceramic Disc Grinder: Provides an even, consistent grind every time.

Odea Giro (Grey) indicator lights passive
Odea Giro (Orange) indicator lights passive
Odea Go indicator lights passive

ceramic disc

manual sliding wheels 50 oz optional 6 oz 14 pucks stainless steel ABS plastic 11.5W x 15D x 14.5H 19 lbs. 7-08461-00022-year
manual sliding wheels 50 oz optional 6 oz 14 pucks stainless steel ABS plastic 11.5W x 15D x 14.5H 19 lbs. 7-08461-00032-year
-. manual sliding wheels 50 oz optional 6 oz 14 pucks stainless steel ABS plastic 11.5W x 15D x 14.5H 19 lbs. 7-08461-00021-year

The Royal Line

Bring the coffeehouse directly into your business or small office with Saecos super automatic Royal line of espresso machines. With all of the programmable features available, the Royals are some of Saecos most impressive machines. The LCD display and programmable push-button technology make it easy for anyone to become a barista. Whole beans are perfectly ground, tamped, brewed and discarded into a used grounds container. Use the steam wand or the built-in Cappuccinatore to easily froth milk directly into your cup.
The Saeco Advantage: LCD Display: Program up to three drink buttons with the easy-to-read interface. Conical Burr Grinder: With automatic shut-off, the built-in conical burr grinder is the optimal way to grind beans. Cappuccinatore Frothing Attachment: Automatically steam and froth milk directly into your cup. Easy Clean System: Fully extractable brew group grinds, doses, tamps, brews and discards used grounds internally.
Royal Coffee Bar LCD display 3 beverages
Royal Professional LCD display 3 beverages
Cappuccinatore & Pannarello -
swivel base 82 oz tank or 3/4 plumbed line optional 10 oz 15 pucks stainless steel metal 15.2W x 15.8D x 19.2H 35 lbs. 7-08461-10055-year
swivel base 82 oz tank optional 10 oz 15 pucks stainless steel metal 15.2W x 15.8D x 19.2H 35 lbs. 7-08461-12110-year

Incanto Line

The Incanto line of super automatic espresso machines feature innovative Saeco technologies including three programmable brew settings and ceramic disc grinders. The Saeco Brewing System makes it easier than ever before to customize and brew espresso at home. Thanks to the Rapid Steam technology, you can easily froth milk to quickly turn your espresso into a cappuccino or latte. The elegant finish and compact footprint make the Incanto line a perfect fit for any kitchen.

The Saeco Advantage: Programmable Brew Settings: Program up to three drink buttons with the easy-to-read interface. Ceramic Disc Grinder: With automatic shut-off, the built-in grinder is safe, quiet and long-lasting. Saeco Brewing System: Make an infinite variety of coffees from one machine with just the twist of a dial. Rapid Steam: Rapid Steam technology reduces the normal waiting time between brewing coffee and steam output to just a few seconds.
Incanto Deluxe LCD display 3 beverages
Incanto Classic indicator lights 2 beverages active
6 - 12 gr. capacity ceramic disc

swivel base 68 oz

10 oz 13 pucks stainless steel metal 12W x 15.5D x 15H 26 lbs. 7-08641-30091-year
10 oz 13 pucks stainless steel metal 12W x 15.5D x 15H 26 lbs. 7-08461-30020-year

Spidem Line

Bringing the caf into your own home has never been easier with the Spidem Villa by Saeco. Just add whole beans and water, and instantly you will have a perfectly extracted espresso. With state-of-the-art technology, you can make all of your favorite espresso-based drinks, including cappuccino, latte, and even regular-strength coffee. Every cup of coffee is freshly ground, dosed, tamped, and brewed with consistent high quality in one cycle, all at the push of a button.
The Saeco Advantage: Coffee Dial Control: Dial display easily adjusts the preferred amount of brewed coffee for each cup. Conical Burr Grinder: With automatic shut-off, the built-in conical burr grinder is the optimal way to grind beans. Pannarello Steam Wand: Quickly steam and froth milk for cappuccinos and lattes perfectly. Easy Clean System: Fully extractable brew group grinds, doses, tamps, brews and discards used grounds internally.
Spidem Villa (Silver) indicator lights -
Spidem Villa (Black) indicator lights -
swivel base 57 oz optional 12 oz 15 pucks stainless steel ABS plastic 15W x 14D x 15.5H 18 lbs. 7-08461-10003-year
swivel base 57 oz optional 12 oz 15 pucks stainless steel ABS plastic 15W x 14D x 15.5H 18 lbs. 7-08461-10004-year

Traditional Line

The traditional line of espresso machines is perfect for those who love the nitty gritty ritual of making an espresso. Each machine is equipped with a pressurized portafilter and an optional pod adapter for the choice of using ground coffee or pre-packed ESE pods for brewing. The Pannarello steam wand froths milk consistently for the perfect cappuccino or latte every time.
The Saeco Advantage: P ressurized Portafilter: The patented filter holder pressurizes the brewing chamber, ensuring a great extraction of espresso. Pannarello Steam Wand: Used to manually froth milk for cappuccinos and lattes. Also produces hot water for tea. ESE Pod Adapter Capability: A pod adapter and special filter basket enable the portafilter to handle single serve prepackaged shots (pods). Cup Warming Surface: Comfortably holds espresso cups and is heated by the residual heat of the boiler.

Features Pressurized Portafilter Pannarello Steam Wand Plug-In Cappuccinatore Pod Adaptable Filter Holder Cup Warming Surface Hot Water Dispenser Dual Spout Dispensing Head Removable Water Tank Water Tank Capacity Boiler Pump Pressure Machine Housing Unit Size Unit Weight UPC Code Warranty MSRP

Magic Cappuccino Plus

included

optional

passive
68 oz stainless steel 15 bar ABS plastic 9.5W x 11D x 14H 13.5 lbs. 7-08461-00033-year
85 oz stainless steel 15 bar metal 8W x 10D x 11.75H 14 lbs. 7-08461-00035-4 (SS) 7-08461-00034-7 (Blk) 1 year

450-$400

Nina Line
The new Nina series of espresso machines completes the BMW-designed Saeco line with sleek lines, compact construction and a modern color palette. These traditional machines are equipped with a stainless steel boiler, a pressurized portafilter, and an optional pod adapter to choose between ground coffee or pre-packed ESE coffee pods. The Pannarello steam wand or Cappuccinatore froths milk consistently for the perfect cappuccino or latte every time. The Saeco Advantage: P ressurized Portafilter: The patented filter holder pressurizes the brewing chamber, ensuring a great extraction of espresso. Pannarello Steam Wand: Used to manually froth milk for cappuccinos and lattes. Also produces hot water for tea. ESE Pod Adapter Capability: A pod adapter and special filter basket enable the portafilter to handle single serve prepackaged shots (pods). Cup Warming Surface: Comfortably holds espresso cups and is heated by the residual heat of the boiler.
Features Display Pressurized Portafilter Pannarello Steam Wand Plug-In Cappuccinatore Pod Adaptable Filter Holder Cup Warming Surface Hot Water Dispenser Dual Spout Dispensing Head Removable Water Tank Water Tank Capacity Boiler Pump Pressure Machine Housing Unit Size Unit Weight UPC Code Warranty MSRP

Nina Bar touch interface

Nina Cappuccino coffee dial

Nina coffee dial

50 oz stainless steel 15 bar metal 11W x 12D x 14H 9 lbs. 7-08461-00038-year
50 oz stainless steel 15 bar ABS plastic 11W x 12D x 14H 9 lbs. 7-08461-00040-year
50 oz stainless steel 15 bar metal 11W x 12D x 14H 9 lbs. 7-08461-00041-year

Drip Coffeemakers

Saeco, the leading manufacturer of espresso machines, is taking its passion for coffee in new directions. These urns and drip coffee products join the industry leaders highly successful product lines that include automatic and traditional home espresso machines, professional and foodservice equipment, vending machines and coffee accessories. Renaissance Coffee Urn: While bringing the knowledge of proper brewing techniques to larger volume customers and events, the Renaissance Coffee Urn delivers the freshest cups of coffee to home entertaining, catering and restaurant service. Renaissance Portable Coffee Urn: Freshly brewed coffee is made even more accessible with the Renaissance Portable Coffee Urn. Holding 25 cups of coffee, this urn is perfect for family gatherings, parties or meetings. The large, heat resistant handle makes it easy to transport. Renaissance Glass: The Renaissance Glass sets out to change the way coffee lovers think of the drip coffeemaker. Combining European styling with the latest innovations, this machine makes brewing a carafe of hot, flavorful coffee easier than ever.

Renaissance Urn Large 60 Cup Capacity Heat Resistant Handle Built-In Cord Storage Stainless Steel Housing Water Indicator Tube Digital Display Control Panel Detachable Power Cord Two Way Dripless Spout Unit Size: 12.5W x 11D x 20H Unit Weight: 9.5 lbs. UPC Code: 7-08461-00098-9 Warranty: 1 year MSRP Price: $179
Renaissance Portable Urn 25 Cup Capacity Large Heat Resistant Handle Stainless Steel Housing Water Indicator Tube Digital Display Control Panel Detachable Power Cord Newly Designed Dripless Spout Unit Size: 8.75W x 11.5D x 13.5H Warranty: 1 year Unit Weight: 9.5 lbs. MSRP Price: $149 UPC Code: 7-08461-11008-4
Renaissance Glass Top Loading Filter Basket 55 oz. Top Filling Water Tank Pause n Serve Glass Carafe and Hot Plate with Keep Warm Function Built-In Cord Storage Programmable LED Control Panel Automatic Shut-Off Unit Size: 8.25W x 12.25D x 14.5H Warranty: 1 year Unit Weight: 6 lbs. MSRP Price: $149 UPC Code: 7-08461-10011-5