Descaling Touch Screen Display

(Touch Plus)

Descaling is as important as changing the oil in your car every 3,000 miles. It is a process that eliminates mineral build up inside your boiler and ensures the machines longevity. For normal household use we recommend descaling at least once every 3 months, depending on the volume of use and hardness of your local water supply. There are many good descaling agents on the market today including Saecos own product: Part number 524000, 3 packets, $4.90 plus $5.90 shipping and handling. Any descaling product used with Saeco machines should be citric based. Do not use vinegar or lemon juice as this will cause damage to the machine. Tip: To ensure that the descaling solution completely dissolves, mix 1 packet of descaling solution with 1 cup of water, stir until powder is completely dissolved and pour into the water tank. Then add additional 3 cups of water.
WARNINGS Do not swallow. Avoid eye contact. Wash hands after use. Do not expose to heat. Keep out of reach of children. This product is non-toxic, biodegradable and odorless.
Step by Step For use with Primea Touch Plus. 1. Start with the machine turned off. 1. Remove the Aqua Prima water filter from the tank and fill with descaling solution. (1 packet of Saeco descaling solution to 4 cups of water.) 2. Turn the machine on and press the descaling cycle button, and then press start descaling. 3. The machine will dispense the solution at pre-established intervals until the water tank is empty. 4. Remove the water tank and rinse thoroughly. Refill with fresh drinking water and replace on machine. 5. Rinse the machine circuits by pressing the start rinsing. (You may need to refill the water tank during this rinse cycle.) 6. When the rinse cycle is complete, refill the water tank and reinsert the Aqua Prima filter. 7. Place a container under the water spout as the machine will automatically prime the water circuit.
For questions or concerns please contact Saeco Customer Service at 800.933.7876 or email at support@saeco-usa.com.

TABLE OF CONTENTS

s re sp

ec ot s

Sa le s& Se rvi
Operation and maintenance manual
Before using the machine, please read the attached operating instructions. Carefully read the safety rules

Mode d'emploi

Veuillez lire attentivement le mode d'emploi (notamment les consignes de scurit) avant d'utiliser l'appareil.
FOR HOUSEHOLD USE ONLY USAGE DOMESTIQUE SEULEMENT

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1 Read all instructions and information in this instruction book and any other literature included in this carton referring to this product before operating or using this appliance. 2 Do not touch hot surfaces. Use handles or knobs. 3 To protect against fire, electric shock and personal injury do not immerse cord, plugs or appliance in water or other liquid. 4 Close supervision is necessary when any appliance is used by or near children. 5 Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance. 6 Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any way. Return appliance to the nearest authorized service centre for examination, repair or adjustment. 7 The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or personal injury. 8 Do not use outdoors. 9 Do not let cord hang over edge of table or counter, or touch hot surfaces. 10 Do not place on or near a hot gas or electric burner, or in a heated oven. 11 Always turn appliance OFF, then plug cord into the wall outlet. To disconnect, turn switch to OFF, then remove plug from wall outlet. 12 Do not use appliance for other than intended household use. 13 Use extreme caution when using hot steam.

SAVE THESE INSTRUCTIONS

This appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service centre. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the machine serviceable by the user. Repair should be done by authorized service personnel only. 1 Check voltage to be sure that the voltage indicated on the nameplate corresponds with your voltage. 2 Never use warm or hot water to fill the water tank. Use cold water only. 3 Keep your hands and the cord away from hot parts of the appliance during operation. 4 Never clean with scrubbing powders or harsh cleaners. Simply use a soft cloth dampened with water. 5 For optimal taste of your coffee, use purified or bottled water. Periodic descaling is still recommended every 2-3 months. 6 Do not use caramelized coffee

CAUTION

A A short power-supply cord is provided to reduce risks of tangling or tripping over a longer cord. B Longer extension cords are available and may be used if care is exercised in their use. C If a long extension cord is used:
1 the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance. 2 if the appliance is of the grounded type, the extension cord should be a grounding type 3 the cord should not hang from the table to avoid the risk of tangling or tripping.
INSTRUCTIONS FOR THE POWER SUPPLY CORD
GENERAL INFORMATION....3 MACHINE.....4

ACCESSORIES......4

INSTALLATION....5
STARTING THE MACHINE.....5 MANUAL PRIMING OF THE WATER CIRCUIT....6 SETTING THE LANGUAGE AND THE CLOCK....6 "AQUA PRIMA" FILTER......7

DISPLAY.....8

CHOOSE COFFEE AROMA.....8

ADJUSTMENTS.....9

COFFEE INTENSITIY.....9 ADJUSTING THE HEIGHT OF THE DRIP TRAY....9 FILLING THE MILK CONTAINER.....9
BEVERAGE DISPENSING.....10
ESPRESSO / COFFEE / LONG COFFEE..... 10 DISPENSING BEVERAGES WITH GROUND COFFEE..... 11 HOT WATER DISPENSING..... 12 LATTE MACCHIATO..... 12 DISPENSING HOT MILK..... 13 ESPRESSO MACCHIATO..... 14 CAPPUCCINO..... 14
BEVERAGE PROGRAMMING.... 15
BEVERAGE PROGRAMMING MENU..... 15 ESPRESSO / COFFEE / LONG COFFEE PROGRAM..... 15 PROGRAMMING MILK BEVERAGES..... 16

MACHINE SETTINGS.....18

PROGRAMMING THE MACHINE.... 18 LANGUAGE MENU..... 19 CUP ILLUMINATION MENU..... 19 AQUA PRIMA FILTER MENU..... 19 WATER HARDNESS MENU..... 20 RINSE MENU..... 20 CUP WARMING PLATE MENU..... 21 ACCOUSTIC TONES AND ALARMS MENU.... 21 DISPLAY MENU..... 21 BEVERAGE SETTINGS......22 ADJUSTMENT OF THE COFFEE BREW TEMPERATURE.... 22 AROMA ADJUSTMENT FOR COFFEE BREWING.... 23 PREBREWING ADJUSTMENT (ONLY COFFEE BEVERAGES).... 23 ADDITIONAL FUNCTIONS.....24 COFFEE OF THE WORLD FUNCTION..... 24 DEMO MODE..... 26 BEVERAGE COUNTER FUNCTION..... 26 MAINTENANCE.....27 MILK CIRCUIT RINSE CYCLE..... 27 MILK CIRCUIT WASH CYCLE..... 28 COFFEE CIRCUIT CLEANING CYCLE (BREW GROUP WASH CYCLE )... 31 BLOCK DISPLAY..... 31 DESCALING...... 32 CLOCK SETTINGS.....34 TIME SETTING...... 34 AUTOMATIC TIMER SETTINGS.... 35 ENERGY SAVING SETTINGS..... 37 SPECIAL......38 FACTORY SETTINGS..... 38

CLEANING AND MAINTENANCE....39
GENERAL MACHINE CLEANING....39 MILK CONTAINER MAINTENANCE AND CLEANING.....40 CLEANING THE BREW GROUP.....42 GRINDER MAINTENANCE.....43
ERROR CODES.....44 TECHNICAL DATA.....45 SAFETY RULES.....46

GENERAL INFORMATION

The coffee machine is intended for preparing espresso by using either coffee beans or ground coffee. It includes an automatic device for preparing milk beverage and a hot water dispenser. The machine is elegantly designed for domestic use and is not suitable for continuous heavy duty or professional use. Warning: no liability is assumed for any damage caused by: Incorrect use not in accordance with the intended uses; Repairs not carried out by authorized customer service centers; Tampering with the power cord; Tampering with any part of the machine; The use of non-original spare parts and accessories; Failure to descale the machine or use at temperatures below 0C.
IN THESE CASES, THE WARRANTY IS NOT VALID.
A WARNING TRIANGLE DRAWS ATTENTION TO ALL THE INSTRUCTIONS THAT ARE IMPORTANT FOR USER SAFETY. PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY TO AVOID SERIOUS INJURY!
HOW TO USE THESE OPERATING INSTRUCTIONS
Keep these operating instructions in a safe place and make them available to anyone else who may use the coffee machine. For further information or if you experience problems not completely or sufciently addressed in these instructions, please contact an Authorized Customer Service Center.

KEEP THESE INSTRUCTIONS

MACHINE
Open coffee bean hopper button Cup warming plate TOUCH SCREEN Display SBS Dispensing head Drip tray + grill and oat Service door Coffee grounds drawer Coffee bean hopper Coffee bean hopper cover Compartment for preground coffee Main switch
Compartment for milk container Button for raising/lowering the drip tray

Hot water spout

Water tank Socket for power cord

Brew group Drip tray

ACCESSORIES
Additional milk container (without cappuccinatore)
Cappuccinatore maintenance kit
"Aqua Prima" Filter

Water hardness tester

Grinder adjustment key
Lubricant for the brew group
Cleaning detergent (Brew group)
Detergent for cleaning milk container
Ground coffee measuring scoop

INSTALLATION

STARTING THE MACHINE
Make sure that the main power button is not switched to the ON position.

Press to select the desired language.

Press ok.

self-test
See manual on page 34 to adjust the clock.
The machine starts and displays the menu in the selected language.
If desired, the demo function (see page 26) may be activated by pressing the key, each time the machine carries out a self-diagnosis.

AQUA PRIMA FILTER

To improve the quality of the water used, install the "Aqua Prima" lter. After installation, go to the lter activation program (see programming). In this mode the machine advises the user when the lter must be replaced.
Remove the "Aqua Prima" lter from its packaging. Enter the date of the current month.
Insert the lter in its place within the empty tank (see gure). Press down until it clicks into place.
Fill the tank with fresh water. Let the lter soak for 30 minutes. After 30 minutes discard the water in the tank and rell with fresh water.

6machine

settings specials

beverage settings

main menu

extras

maintenance
show icon explanation my custom coffee programming menu
clock settings back to coffee menu

energy saving

Press "programming menu".
Press "machine settings".

language

cup illumination

not inserted

go back restore default settings save settings

activate

display alerts & acoustic settings

go back

machine settings

cup warmer

restore default settings

water hardness

rinsing

back to menu

inserted
Press "water lter".
Press "activate lter".
The machine then activates the "Aqua Prima" lter. Wait for the cycle to nish automatically. When the activation cycle ends, the machine proceeds to the choose beverage menu. NOTE: occasionally, the machine may not dispense the desired quantity of water for the correct water lter initialization. In this case, repeat the operations described from point 6 and following.

DISPLAY

It is possible to change the type of display and choose between " icon format" and "text format"

ICON FORMAT

hot milk

TEXT FORMAT

latte espresso macchiato cappuccino macchiato medium hot water long coffee medium medium strong

coffee medium

my custom coffee

espresso strong

programming menu

show icon explanation

show icon
Go to the "text format" menu

Beverage programming

Accessing the programming menu
Go to the "icon format" menu
To get the desired beverage, press the corresponding symbol on the display. The machine automatically performs all the necessary operations. To make 2 cups, press the beverage symbol twice. press twice

Check that all the containers are clean. To do this operation, follow the instructions in the "Cleaning and Maintenance" (see page 39).
WHEN YOU HAVE FINISHED PREPARING BEVERAGES CONTAINING MILK, PROCEED WITH CLEANING THE CONTAINER AND THE MACHINE'S CIRCUIT.
To brew 2 cups, the machine dispenses half of the entered quantity and briey interrupts dispensing in order to grind the second serving of coffee. Coffee dispensing is then restarted and completed.If a milk beverage has been chosen, the machine automatically dispenses the milk. If the rst coffee is interrupted, the second will not be dispensed.
ESPRESSO / COFFEE / LONG COFFEE
This procedure shows how to dispense an espresso. To dispense another type of coffee, press the appropriate icon. Use appropriate espresso or coffee cups so that the coffee will not overow.

espresso

stop coffee dispensing
Choose the beverage and press the corresponding icon on the display: once for 1 cup and twice for 2 cups.
The machine begins grinding the quantity of coffee entered.
Begin dispensing the selected beverage.
The machine ends dispensing automatically according to the quantity determined by the manufacturer. It is possible to customize this quantity. See page 15. If you wish to interrupt the dispensing cycle, press the " stop coffee dispensing" button.
DISPENSING BEVERAGES WITH GROUND COFFEE
Pre-ground coffee must be poured into the appropriate compartment positioned next to the coffee bean hopper. Pour in only coffee ground for espresso machines and never coffee beans or instant coffee. (see the "Beverage programming" chapter on page 15). WARNING: PUT PRE-GROUND COFFEE IN THE COMPARTMENT ONLY WHEN YOU WISH TO DISPENSE THIS TYPE OF BEVERAGE. INSERT ONLY ONE SCOOP OF GROUND COFFEE AT A TIME. TWO CUPS OF COFFEE CANNOT BE DISPENSED AT THE SAME TIME. In the example given below, we chose to dispense a long coffee using pre-ground coffee. The customized choice of using pre-ground coffee is shown on the display with an asterisk next to the chosen beverage.
add preground coffee start!
Press the appropriate button and the display will show:
A message appears, reminding the user ground coffee in the appropriate compartment.
Pour ground coffee into the preground coffee compartment using the measuring scoop provided with the accessories.

long coffee

stop coffee dispensing go back
Press the "start! "button to start dispensing.
Begins dispensing the selected beverage.

milk rinsing cycle rinse the milk container

start rinsing

rinsing milk circuitplease wait

rinsing.

Remove the milk container from the machine. If it still contains milk, pour the milk in the additional container, to store in the refrigerator for future use. Rinse the container with the cappuccinatore and ll it with fresh water; place it in the machine and press the start rinsing key.
While the machine is rinsing the user cannot interrupt the cycle, but must wait until the cycle is completed. Once completed the machine returns to the main menu.
Remove the container, rinse and dry.
THIS PROCEDURE MUST BE PERFORMED FOR ALL MILK BEVERAGES!

DISPENSING HOT MILK

Fill the milk container
To dispense another cup of milk, repeat this operation. When the "milk rinsing" symbol ashes, clean the milk circuits as described for latte macchiato (see page 12, Step 6).
Press the hot milk icon once.
The hot milk is dispensed.

ESPRESSO MACCHIATO

espresso macchiato
Press the icon once for 1 cup and twice for 2 cups.
Espresso macchiato begins brewing.
When the "milk rinsing" symbol ashes, clean the milk circuits as described for latte macchiato (see page 12, Step 6).
Once the coffee has been brewed, the machine automatically prepares the hot milk.
To dispense more milk, press the add milk icon.

CAPPUCCINO

cappuccino
When the coffee nishes grinding, the machine will dispense the programmed quantity of hot milk. When the "milk rinsing" symbol ashes, clean the milk circuits as described for latte macchiato (see page 12, Step 6).
After this, the machine allows you to dispense more milk if you wish. Press the add milk button within 2 seconds.

BEVERAGE PROGRAMMING

BEVERAGE PROGRAMMING MENU
Each beverage can be programmed according to your individual taste. Customization is shown on the display with the addition of an asterisk.
Once a beverage has been customized it will only dispense that type of beverage. To change or modify the beverage a new customization must be done. To program the desired beverage:
show icon explanation my custom coffee programming menu show icon explanation my custom coffee programming menu

milk circuit rinsing cycle
Wait for the cycle to nish. The machine will return to the main menu.

MILK CIRCUIT WASH CYCLE

To rinse the machines internal circuits used for preparing milk. This cycle is proposed after 14 days from the rst dispensing of a milk-based beverage. After 14 days, the milk cleaning message starts ashing (see page 13). Perform the wash cycle as described in this section.
Push the milk cleaning button and refer to the instructions below, at step 2. The machine switches to the status described at point 7. If the milk circuit wash cycle is not performed after 14 days, the dispensing of milk-based beverages will be still be possible for only 7 more days. After 7 days, the wash cycle must be performed because the dispensing of milk-based beverages is disabled. (The machine still enables dispensing hot water and coffee). To remind the user of this important operation, the message milk cleaning -3 is shown on the display 3 days before the deadline and is updated on subsequent days.

milk cleaning -3

Before performing this function make sure that: 1. a large enough container is at hand. 2. the milk container has been adequately cleaned of all milk residue. 3. the water tank contains a sufcient quantity of water. THE WASH CYCLE CANNOT BE INTERRUPTED. A PERSON MUST BE PRESENT DURING THE OPERATION. USE ONLY AND EXCLUSIVELY THE PROVIDED DETERGENT.

1 lock

display milk cleaning cycle milk circuit rinsing cycle
Select the function by pressing the milk cleaning cycle button.
Open the compartment and remove the milk container.
Insert the content of the detergent packet into the container.
Fill the milk container with fresh water up to the max level.
Insert the container into the drawer and close the drawer.
Position an adequately sized container under the milk spout. The second milk container may be used as well.

milk cleaning cycle

add cleaner to milk conteiner

cleaning.

rinse the milk container
Close the compartment. Press the button.
The wash cycle starts automatically. Wait for the wash cycle to nish.
When the wash cycle has nished the following appears The machine emits a tone.
fill milk container with cold water

start rinsing cycle

Remove the milk container.
Rinse the container and ll it with fresh water.
Insert the container and press the button.
When the rinse cycle has nished the above message will appear.

Pause descaling. The descaling and/or rinsing can be paused and then restarted. When descaling is interrupted the machine will warn the user that it must be turned off. WARNING! DESCALING MUST BE COMPLETED WITHIN 24 HOURS FROM ITS INTERRUPTION. The next time the machine is turned on, the machine will warn the user that the descaling and/or rinse process must be completed.

with descaling solution

start descaling

descaling 200

The machine indicates to the user the need to complete the descaling through the message on the main menu. This does not block the machines operation. The number under the message indicates the number of beverages that can be dispensed before the machine before the machine needs to be descaled. 30 beverages before descaling, the button will begin to ash. When the number reaches zero, the machine must be descaled. Pressing the descaling button accesses the descaling menu.
When in the descaling menu, the message ll the water tank with descaling solution appears on the display. Perform the descaling cycle by pressing start descaling as shown.
In order to run a descaling cycle before the machine indicates the necessity to do so, press the button "descaling cycle" and then "start descaling" to start the descaling cycle.
descaling cycle start descaling
descaling cycle please wait

descaling.

pause descaling
The machine begins to dispense the descaling solution through the hot water spout. The dispensing occurs at preestablished intervals, in order to allow the solution to be more effective.
insert the water tank with fresh water
rinsing ciclo di risciacquo cycle
When the solution is nished the following message appears on the display:
Remove the water tank and rinse with fresh drinking water to eliminate traces of descaling solution. Then, rell with fresh drinking water and reinsert water tank.
Rinse the machine circuits by pressing "start rinsing".

pause rinsing

The machine performs the rinse cycle. At the end of the rinse cycle you are requested to ll the tank with fresh drinking water. Before relling the tank, reinsert the Aqua Prima lter if desired.
Put a container under the water spout. When the water tank is inserted the machine automatically proceeds to prime the water circuit. If this operation is not successful, consult "manually priming the circuit" (see page 6)

CLOCK SETTINGS

To adjust the current date and time, the timer for stand-by (energy savings) and the times for automatically turning on and turning off the machine. Press the "clock settings" button on the main menu. In this menu you can:

time settings

clock settings
set the parameters for stand-by after the last brew.

energy saving settings

set - the current time - the current date - the view format (24 hour AM/PM) set the intervals for turning the machine on and off (three intervals that can be activated separately).

TIME SETTING

To set all the parameters relating to the clock and calendar. Important: To correctly program the times for turning the machine on and off, press the timer settings button.

time weekday

current time

09:45 (am)

modify the settings related to the current time and the day of the current week.
view the current time setting. view the current day of the week setting. view the current time format setting.

time format

current weekday

thursday

current format
modify the settings relating to viewing the time (in 24 hour or am/pm format).
Current time/day of the week
To set the day of the week and the current time on the machine. Press the "time/weekday" button. In this menu you can:

time weekday 09h (am)

43 min
Adjust the hour by pressing + or Adjust the minutes pressing + or Adjust the day pressing or

weekday

go back save settings

Time format

To set the time view mode. This setting adjusts all clock functions to either am/pm or 24 hour formats. To set the time view mode, press the time format button. The modicatino is immediately applied and in small writing appears am/pm or 24 hour.

AUTOMATIC TIMER SETTINGS

With this function you can turn on (activate) and turn off (energy savings) the machine at the desired times. Remember that the machine manages this function only if it is turned on.
In this menu you can: set the rst interval for turning on

setting 1

on 07:00 am off 09:00 am

setting 2

on 12:00 pm off 14:00 pm
set the second interval for turning on

select a timer setting

setting weekday
choose on what days the intervals are active

setting 3

on 17:00 pm off 19:00 pm
set the third interval for turning on
To correctly program the automatic timer settings, you must: - set the individual intervals for turning on and turning off the machine. - choose on which days to apply these auto on/off intervals. It is recommended to not overlap intervals for turning on the machine.

Setting an interval for turning on the machine
In order to program an interval for turning on the machine, press the button for the interval that you wish to set.

08h (am)

Adjust the hour to turn on by pressing + or -

turn machine on

15 min
save settings back to menu
Adjust the minutes by pressing + or -
To save the adjusted settings and go to the next screen

09h (am)

Adjust the hour to turn off by pressing + or -

turn machine off

To save the adjusted setting
For every day, choose the intervals for turning on
Arrow through the days of the week, and for each day, select the automatic timer intervals you wish to activate.
Interval not active for the selected day
Interval active for the selected day

edit weekday timer

monday
Select the day by pressing or
To save the settings Each day you can select various intervals.

ENERGY SAVING SETTINGS

To set after what duration of time, from the last dispensed beverage, the machine will go into stand-by mode. The default setting is "after 3 hours".

energy saving setting

after 15 min

after 30 min

standby setting

after 3 hours

Select the desired time to activate stand-by.

after 1 hour

When the selected duration of time has passed, the display reads stand-by.
To activate the machine, press start. After having performed the function diagnostics and the heating up phase, the machine is once again ready for use.

SPECIAL

This menu allows you to access special functions present on the machine. Press the "specials" button on the main menu.

factory settings

FACTORY SETTINGS
The function for restoring all the factory settings is contained in this menu. This function is particularly important for restoring the original settings. Press the factory settings button.
do you really want to restore all factory settings? all custom settings will be lost!

attention!

If "yes" is selected, a subsequent conrmation by inverted switch buttons is requested to be sure that you want to perform the reset. ALL THE CUSTOM SETTINGS WILL BE LOST AND CANNOT BE RECOVERED. AFTER RESTORING FACTORY SETTINGS, YOU MUST, IF DESIRED, REPROGRAM ALL THE MACHINE'S FUNCTIONS.
all default settings are restored

are you sure?

Selecting "yes" restores the settings.
On the display, the message all default settings are restored appears for two seconds.
After this period, the machine returns to the main display.

ERROR CODES

HOW TO REMOVE THE MESSAGE Turn off and after 30 minutes turn the machine on again to restore normal operation. Problem that requires the intervention of the customer service center. Insert drip tray under the brew group. Close the coffee bean hopper cover to be able to brew any beverage. This message guides the user when, in the customized beverage programming, the use of this type of coffee has been chosen. Insert the brew group in its place. Insert the grounds drawer. Remove the grounds drawer and empty the grounds in an appropriate container. Note: The grounds drawer must be emptied only when the machine requires it and when the machine is turned on. Emptying the drawer with the machine turned off does not allow the machine to register that it has been emptied.
GUIDE MESSAGE THAT APPEARS restart the machine call assistance insert drip tray close coffee bean container add ground coffee
insert brew group insert dreg drawer empty dreg drawer
close side door rell water tank empty drip tray insert the milk container prime the machine
To be able to make the machine functional, the side door must be closed. The tank must be removed and relled with fresh drinking water. Open the side door and empty the drip tray under the brew group) Insert the milk container in the appropriate compartment Press on the display in order to proceed with manually priming the water circuit. The machine performs an automatic attempt to prime the circuit. If this attempt does not perform correctly you must proceed with these instructions. Contact the customer service center (toll free number) to request assistance on how to resolve the problem. Repeat the operation as described in the appropriate section. see page 13 and 27. see page 13 and 28.
circuit priming failure the descaling cycle has not been completed correctly milk rinsing milk cleaning
ERROR CODES / TECHNICAL DATA
GUIDE MESSAGE THAT APPEARS change acqua prima lter HOW TO REMOVE THE MESSAGE
The Aqua Prima lter must be replaced in the following cases: 1. 60 liters of water has been dispensed; 2. 90 days have passed since its installation; 3. 20 days have passed and the machine has not been used. Note: this message appears only when "inserted" has been selected in the water lter function (See page 19). Repeat the operation as described in the appropriate section. Insert the cappuccinatore in the milk container. Without the cappuccinatore no beverage containing milk can be dispensed. The user must wash the milk tank after it has been used. A descaling cycle must be performed on the machine's internal circuits. Press the "start" button

the cleaning cycle has not been completed correctly insert milk container with cappuccinatore
rinse the milk tank descale the machine energy saving

TECHNICAL DATA

Nominal voltage Power rating Power supply Shell material Size (w x h x d) Weight Cable length Control panel Water tank Milk Tank Coffee Bean Hopper Capacity Pump pressure Boiler Coffee grinder Pressure safety device Temperature safety device See label on the appliance See label on the appliance See label on the appliance Plastic 355 x 380 x 460 mm - 13.8 x 15.4 x 16.Kg - 30.9 lbs 1200 mm - 42.2 (Digital) Front 2 liters - 68 oz. / Removeable ca. 0.400 liters - 12.5 oz. / Removeable 350 grams - 8.9 oz. / of coffee beans 15 bar Two in stainless steel With ceramic grinders Boiler pressure safety valve Boiler thermostats and thermal fuses
Subject to engineering and manufacturing changes due to technological developments. The machine conforms to the European Directive 89/336/EEC (Italian Legislative Decree 476 dated 04/12/92) concerning electromagnetic compatibility.

SAFETY RULES

IN CASE OF EMERGENCY
Immediately unplug the cord from the outlet.

ONLY USE THE APPLIANCE

Indoors. For preparing coffee, hot water and for foaming milk. For domestic use. By adults in non altered psycho-physical conditions.
PRECAUTIONS FOR THE USE OF THE MACHINE
Do not use the machine for purposes other than those indicated above, in order to avoid danger. Do not introduce any substances other than those indicated in the instruction manual. During the normal lling of any reservoirs, all nearby reservoirs must be closed. Fill the water tank only with fresh drinking water: Hot water and/or any other liquid may damage the machine. Do not use water with carbon dioxide added. Do not put ngers or any material other than coffee beans in the coffee grinder. Before manipulating the coffee grinder, turn of the machine's main switch and unplug the cord. Do not put instant coffee or whole bean coffee in the ground coffee container. To operate the machine with the touch screen, use only your ngers.
CONNECTION TO ELECTRICAL POWER
The connection to the electrical network must be carried out in accordance with the safety regulations in force in the user's country. The machine must be connected to a socket which is: compatible with the type of plug installed on the machine; suitably sized to comply with the ratings shown on the machine identication plate. effectively grounded. The power cord must not: come into contact with any type of liquid: danger of electric shocks and/or re; be crushed and/or come in contact with sharp surfaces; be used to move the machine; be used if damaged; be handled with damp or wet hands; be wound in a coil when the machine is being operated. be tampered with.

Choose a solid, stationary at surface (no more than 2 of inclination). Do not install the machine in areas where water could be sprayed. Optimal operational temperature: 10C - 40C / 50-104 degrees Fahrenheit maximum humidity: 90%. The machine should be installed in an adequately lit, ventilated, hygienic location and the electric socket should be within easy reach. Do not place on heated surfaces! Install it at least 10 cm / 4" from the walls and cooking surfaces. Do not use in places where the temperature may drop to a level equal to and/or lower than 0C / 32 degrees Fahrenheit. If the machine has been exposed to such conditions notify the customer service center, who will have to carry out a safety check. Do not use the machine near inammable and/or explosive substances. The machine must not be used in an explosive or volatile atmosphere or where there is a high concentration of dust or oily substances suspended in the air. Do not install the machine on top of other appliances.

DANGERS

The appliance must not be used by children and persons who have not been informed of its operation. The appliance is dangerous to children. When left unattended, unplug from the electrical outlet. Keep the coffee machine packaging out of the reach of children. Never direct the jet of hot water and/or steam towards yourself or others. Danger of scalding.
Do not insert objects through the appliances openings. (Danger! Electrical Current!). Do not pull out the plug by yanking on the power cord or touching it with wet hands. Warning. Danger of burning when in contact with hot water, steam and the hot water spout.

FAILURES

Do not use the appliance if a failure has been veried or suspected, for example after being dropped. Any repairs must be performed by an authorized customer service center. Do not use the appliance with a defective power cord. The manufacturer or its customer service center will have to replace the power cable if damaged. (Caution! Electrical Current!) Turn off the appliance before opening the service door. Danger of burns!

CLEANING / DESCALING

Clean the milk circuit only with the recommended detergent powder supplied with the machine. Carefully follow the safety instructions given on the packaging. Clean the coffee circuit only with the recommended detergent tablets supplied with the machine. Carefully follow the safety instructions given on the packaging. Before cleaning the machine, the main switch must be turned to OFF (0), unplugged from the socket and cooled down. Keep the appliance from coming into contact with splashes of water or immersing in water. Do not dry the machines parts in conventional or microwave ovens. The machine and its components must be cleaned and washed after the machine has not been used for a certain period.

REPLACEMENT PARTS

For safety reasons, use only original replacement parts and original accessories.

WASTE DISPOSAL

- The packing materials can be recycled. - Appliance: unplug the appliance and cut the power cord. - Deliver the appliance and power cord to a service center or public waste disposal facility This product complies with EU Directive 2002/96/EC. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city of ce, your household waste disposal service or the shop where you purchased the product.

FIRE SAFETY

In case of re, use Carbon Dioxide extinguishers (CO 2). Do not use water or dry-powder extinguishers.
ADDITIONAL INFORMATION FOR CORRECTLY USING THE AQUA PRIMA FILTER.
Please follow these simple instructions to correctly use the Aqua prima lter: 1. Keep the Aqua prima lter cool and away from sunlight; the room temperature should be between +5C and +40C; 2. Do not use the lter in temperatures over 60C. 3. If the coffee machine is not used for 3 days, we recommend washing the Aqua prima lter; 4 If the coffee machine is not used for more than 20 days, it is advisable to replace the lter. 5. To store an already opened lter, seal it in a nylon bag and keep in the fridge; do not store it in the freezer to avoid damaging the lter properties. 6. Before using the lter, leave it to soak in the water tank for 30 minutes. 7. Once it is taken out of its pack, do not keep the lter in the open air. 8. The lter must be replaced 90 days after opening the packing or after treating 60 litres of drinking water.