STAMPATO SU CARTA RICICLATA. NESSUN ALBERO E' STATO ABBATTUTO PER PRODURRE QUESTO MANUALE

C A P P U C C I N O

TYPE SUP 016
User's and maintenance booklet
Cod. 0340.951 - Ed.01 11/00
We congratulate for having bought this top-quality espresso machine and thank you for choosing Saeco. Before operating the machine, we recommend to read the following instructions thouroughly which explain how to use, clean and maintain the machine.

HOUSEHOLD USE ONLY

Aufheizen.
How to use the instructions These instructions cannot anticipate every possible use of the machine. For further information or questions concerning specific situations or problems, please contact the local dealer or manufacturer directly.

DESCRIPTION OF SYMBOLS

Voltage rating Nominal power Dimensions (length x width x height) Machine case Weight Cable length System Temperature control Coffee grinder adjustment Coffee grounds ejection Ground coffee dosage Cup programming Water tank Water regulation Capacity - water tank - bean coffee container Steam/hot water dispensing tube Steam/hot water dispensing Heating time Brewing time - espresso coffee - coffee - hot water - milk (cappuccino) Overheating protection Insulation Approvals In compliance with EN regulation Warranty Accessories (included in the machine price) Measuring spoon Central unit key Cleaning brush Water hardness detecting strips
TECHNICAL DATA see rating plate on the back of the machine see rating plate on the back of the machine approx. 385 x 330 x 395 mm metal and plastic material approx. 16 kg approx. 1.2 m free flow thermal cut-out, alternating piston pump electronic grinding adjustment device automatic coffee releasing device 0-250 ml approx. removable, transparent tank electronic, continuous approx. 2.4 litres 300g bean coffee adjustable, supplied with burn protection adjustable, continuous approx. 2 min. approx. 20s/cup approx. 30s/cup approx. 60s/cup approx. 60-90s cream/cup incorporated protection range I see rating plate on the back of the machine EN 60335-2-15(96) - EN 60335-2-14(96) - EN 55014 in compliance with the warranty certificate enclosed herein
Save these instructions carefully and make sure to hand them to other users.
The warning triangle shows all important safety indications to ensure the users safety. The non-observance of said instructions may cause serious injuries!
B Reference to figures, parts of the machine and control elements are given by numbers or letters, as figure B exemplifies.
The first cover page of the manual shows figures relevant to the text. Thus, keep it open while reading the instructions.

SAVE THESE INSTRUCTIONS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of unisulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of fire or electric shock to persons.
Table of contents Page Technical data Safety rules Machine controls and parts Description of the control panel Unpacking/Installation Power supply connection Starting and use Drainage Page Programming the machine Recommendation Grind adjustment Brewing Incorporated Safety Devices Cleaning and maintenance operations Disposal Troubleshooting
The exclamation point within an equilateral triangle is intended to alert the u ser to the presence of important operating and maintenance ( servicing) instructions in the literature accompanying the appliance.

PROGRAMMING THE MACHINE

"PLEASE ACTIVADE " "SYSTEM 2 "
Water hardness adjustment In order to adjust the water hardness, it is necessary to test the water using the strip supplied with the machine. Dip the strip into the water for a second, shake off excess water gently, wait approx. 1 minute and read the results. Move the asterisk at the end of the line to the menu item WATER HARDN. using the keys and select it by means of the ENT button. The following message will be displayed:
Do not fill the tank with an excessive quantity of water.

"VENTILATE

Programming the machine

"

Always fill the tank with fresh water only: hot water as well as other fluids might damage the tank. Never use carbon dioxide added water.
32 To enter the programming mode, press the key ENT ( pre-ground coffee) when the machine is on and keep it pressed until the first two lines of the programming mode are displayed:
Do not switch on the machine on if the water tank is empty: always make sure there is enough water in the tank! Connect the plug to the socket and press the main switch. The following message will be displayed:
"1 LANGUAGE "2 SYSTEM 2

" "

"1 LANGUAGE "ENGLISH

The keys options:

"3 WATER HARDN./ " "HARDNESS 3 "
allow you to change the set
At the end of the line a blinking asterisk is displayed, which can be moved up and down with the keys (tall and regular coffee). button to move it on the second menu and vice versa. The display shows the following sequence of messages: 9 LANGUAGE SYSTEM 2 WATER HARDN. CUP HEATER TEMP. L. COFFEE TEMP. COFFEE TEMP. S. COFFEE PREBREWING PREGRINDING 10 PROG. H. WATER 11 PROG. CAPPUC. 12 TOTAL COFFEE 13 DESCALING 14 SIGN. DESCAL. 15 TIMER 16 VENDING 17 EXIT If the asterisk is on the first menu, press

"WARMING UP."

Should
The keys allow you to change the set options : ENGLISH , ITALIANO , FRANAIS, DEUTSCH , NEERLANDAIS, ESPAOL, PORTUGUES. Enabling of second heating system Royal Cappuccino is equipped with two boilers with independent circuits. One of these boilers can be disconnected. By pressing keys move the asterisk at the end of the line to the menu item SYSTEM 2. Press ENT to activate this item. The following message will be displayed:

"ENERGY "SAVING
Hardness 4 Hardness 3 Hardness 2 Hardness 1
Standby to be displayed, press button disactivate the energy saving mode. Drainage Direct the steam/hot water spout on the drip tray (2). Place a cup or another suitable container under the dispensing tube, then turn the steam/ hot water knob counterclockwise. The pump starts automatically. Wait until a regular water jet is obtained, then close the knob. The machine is now drained and ready to work. The following message will be displayed:
HARDNESS 4 (hard water) HARDNESS 3 (medium water) HARDNESS 2 (soft water) HARDNESS 1 (very soft water)
"2 SYSTEM 2 "ON
To leave the menu, move the asterisk at the end of the line to item << Exit>> using the key. Then, press ENT ( pre-ground coffee). The machine is now in the normal mode again. Selecting single menus Select the different menu items by means of the
"SELECT PRODUCT "READY FOR USE
The keys allow you to change the set options: ON, OFF. If the second boiler is disconnected it is not possible to dispense steam and therefore cappuccino cant be prepared. Should the cappuccino selection button be pressed or the steam/hot water knob be opened, the display shows the following message:
Cup heating plate connection Royal Cappuccino is equipped with a useful cup heating plate which can be disconnected, if required. Press keys to move the asterisk to item CUP HEATER. Press ENT to activate this function. The following message will be displayed:
"4 CUP HEATER "ON
The keys allow you to change the set options ON or OFF. Temperature selection With Royal Cappuccino a precise adjustment of the coffee temperature can be executed. Move the asterisk at the end of the line to the menu items Temp. l. coffee, Temp. coffee or Temp. s. coffee and select it by means of the ENT key. Depending on the selection, the following messages will be displayed:
PROGRAMMING THE MACHINE time saving whenever the machine is often used. This function is not recommended in all other cases, because fresh ground coffee is by far better. Press keys to move the asterisk to item PREGRINDING. Press ENT to activate this function. The following message is displayed:
Press keys to move the asterisk to item PROG.CAPUC. Press ENT to activate this function: The following message will be displayed:
PROGRAMMING THE MACHINE The following message will be displayed:

"STANDBY "AFTER 0:00
"11 PROG. CAPUC. " "ON "
The keys allow you to change the set options: ON, OFF. Coffee counter Press keys
By means of the same keys , select the suitable time and confirm the value throughENT button. When the selected time is over the following message is displayed:
"9 PREGRINDING "ON
The keys allow you to change the set options ON, OFF.
"5 TEMP. L. COFFEE" "MEDIUM " "6 TEMP. COFFEE "MEDIUM " "
"7 TEMP. S. COFFEE"
The keys allow you to change the set options Minimum, maximum, high, medium or low. Prebrewing function As soon as the coffee has been moistened, the pump stops for a while in order to allow a better utilization of the coffee powder. Move the asterisk at the end of the line to the menu item PREBREWING and select it by means of the ENT key. The following message will be displayed:
Hot water programming Whenever this function is enabled, the selected water amount is constantly dispensed. On the contrary, whenever this function is disabled hot water is dispensed until the user stops the dispensing. Hot water amount can only be programmed with programming mode enabled. - PROG. H. WATER. Press ENT to activate this function. The following message will be displayed:
to move the asterisk to item TOTAL COFFEE and select it by means of the ENT key. The following message will be displayed:
The machine stops and can be switched on again by means of button standby. Vending functions Royal Cappuccino is equipped with a counter allowing the machine statistic analysis while detecting the different dispensing operations. It is also equipped with another counter which is able to stop the dispensing operations after a certain number. These functions are protected by a special access code. move the asterisk to item VENDING and select it through the ENT key. From the displayed submenu it is possible to select one of the following items by means of the same keys. On the contrary, if the hot water selection key is pressed, the submenu can be quit. The following messages will be displayed: By means of keys
"12 TOTAL COFFEE " " XX"
This value cannot be modified. Quit the menu by means of the ENT or ESC keys. Descaling Move the asterisk at the end of the line to menu item Descaling and select it by means of the ENT key. The following message will be displayed:
"10 PROG. H. WATER" "ON "
The keys allow you to change the set

"13 DESCALING

For descaling procedure, see page 92.
"8 PREBREWING "ON
options: ON, OFF. Cappuccino programming Whenever this function is enabled, the same amount of cappuccino is constantly dispensed. On the contrary, whenever this function is disabled, cappuccino is brewed until the user stops the dispensing. Cappuccino amount can only be programmed with programming mode enabled.

The keys allow you to change the set options ON, OFF,LONG (in the latter case the pump stop is longer). Pre-grinding function By activating this function, grinding occurs every time the doser is empty. So a ground coffee portion is always ready in the doser, allowing a
Timer The timer enables the automatic switching off of the machine after a preset period, which can be set from 15 minutes to 12 hours after last dispensing. If after a few seconds coffee is brewed again, the timer is reset. If the value set is 0:00, the timer function is not activated and the machine does not switch off. Move the asterisk at the end of the line to menu item Timer by means of the keys. Press ENT to select this item.

"CODE "

" ****" " " " "
"1 LARGE COFFEE "TOTAL "1 COFFEE "TOTAL
"1 SMALL COFFEE "TOTAL "HOT WATER "TOTAL "COUNTER "LOCKING "COUNTER "CYCLES " " " " " " " "
PROGRAMMING THE MACHINE Code entering To enter the code, press keys
dispensed from the last reset. From the VENDING menu, move the asterisk to the COFFEE menu by means of keys ; confirm the selection through ENT. By means of the same keys , it is possible to modify the selected value (to reset the counter, for example). Press ENT to save a new value. On the contrary, by pressing ESC the new value entering is stopped and, as a result, the former counter setting shall be considered. Small coffee counter Counter

RECOMMENDATIONS

and move the asterisk to the counter to be changed; select it through the ENT button. The following message will be displayed:
"COUNTER "LOCKING:

" XX"

"CODE??
Enter the number to be set on the first character by means of keys and confirm the selection with ENT. The entered number is then saved and the cursor moves automatically to the following character. If a wrong code has been entered, the following message will be displayed for about two seconds:
Code programming A code protects the access to the machine counters; enter it for each programming section and before carrying out any modification. As soon as the code is entered, modifications can be carried out without entering it again as long as the programming function is enabled. The machine is not supplied with a code. Keep to the following indications for code programming: By means of keys move the asterisk to item VENDING and select it through the ENT key. The following message will be displayed:
"1 SMALL COFFEE " "TOTAL: XX"
The counter shows the small coffee amount dispensed from the last reset. From the VENDING menu, move the asterisk to the SMALL COFFEE menu by means of keys ; confirm the selection throughENT. By means of the same keys , it is possible to modify the selected value (to reset the counter, for example). Press ENT to save a new value. On the contrary, by pressing ESC the new value entering is stopped and, as a result, the former counter setting shall be considered. Hot water dispensing counter

"CODE FAULTY

After having entered three wrong codes, the entering procedure is not allowed any longer. Counter modification Large coffee counter
After a certain number of cycles, this function allows to stop the coffee dispensing (excluding hot water, steam and cappuccino dispensing operations). It can also be used, for example, to program the machine servicing. If the 0 value is set, the function is disabled. From the VENDING menu, move the asterisk to the COUNTER menu by means of keys and confirm the selection through ENT. Press the same keys to modify the selected value (for example to set a new servicing limit). Through ENT a new value can be saved. On the contrary, by pressingESC the new value entering is stopped and, as a result, the former counter setting shall be considered. When the set limit has been reached, the coffee dispensing stops and the following two messages are displayed:
"1 LARGE COFFEE " "TOTAL: XX"
The counter shows the large coffee amount dispensed from the last reset. From the VENDING menu, move the asterisk to the LARGE COFFEE menu by means of keys ; confirm the selection with button ENT. By means of the same keys it is possible to modify the selected value (to reset the counter, for example). Use the ENT button to save a new value. Press the ESC button to stop the new value entering procedure and, as a result, the former counter setting shall be considered. Coffee counter
"COFFEE DISPENS. " "BLOCKED " "SELECT PRODUCT "READY FOR USE " "

" ****"

By means of keys enter the number to be set on the first character and confirm the selection through the ENT key. The entered number is saved and the cursor moves automatically to the following character. After having entered the complete new code, it is necessary to save it. The following message will be displayed:
"HOT WATER "TOTAL:
Reset the counters by pressing the cappuccino selection key. Dosage of ground coffee 33 The coffee dosage adjustment lever (18) allows the selection of the grinding coffee amount from 6 to 9 grams. Place lever (18) on the required position. RECOMMENDATIONS Prolonged idleness If the machine hasnt been used for a prolonged
The counter shows the hot water amount (in ml) dispensed from the last reset. From the VENDING menu, move the asterisk to the HOT WATER menu by means of keys ; confirm the selection throughENT. By means of the same keys , it is possible to modify the selected value (to reset the counter, for example). Press ENT to save a new value. On the contrary, by pressing ESC the new value entering is stopped and, as a result, the former counter setting shall be considered.

Empty coffee bean container When coffee beans run out, the coffee grinder stops and the following message is displayed:
"COF. BEANS EMPTY "
Fill the container and restart the cycle. Empty water tank When water runs out, the program stops automatically and the following message is displayed:
"1 SMALL COFFEE "PROG. QUANTITY
Make sure to use pre-ground coffee only (medium ground). Never use whole beans or soluble coffee.
The machine considers automatically the necessary amounts to brew two cups of coffee. Attention! If the pre-brewing function is enabled during the cups dosage adjustment, keep the selected key pressed even during the pump stop until the desired amount is reached. Double quantity of coffee or 2 cups of coffee By pressing one of the three selection keys twice, before coffee dispensing begins, the machine will brew a double portion of coffee. Coffee grinding 34 This machine grinds a portion of fresh coffee for Right before brewing coffee, fill the container with freshly ground coffee. For best results, make sure coffee blend is fresh. Remember that ground coffee ages soon, thus losing its quality! 35 Important! Use the measuring spoon supplied to fill the container (14) with a single portion of ground coffee! Use a full measure only. To dispense coffee, press pre-ground coffee button and the desired selection key (large
"WATERTANK EMPTY "
Fill the tank and restart the cycle. Grounds container warning light As soon as there are 30 grounds in the container, the following message is displayed:
"DREGDRAWER FULL " "READY FOR USE "
coffee, coffee, small coffee) to obtain a cup of coffee. Important! This function does not allow the double coffee cycle. Dispensing may be interrupted by pressing one of the coffee selection keys, if an excessive water amount has been selected. Hot water dispensing Hot water dispensing is accomplished through an independent water circuit which ensures the correct temperature and supplies tasteless hot water to be used for tea, soup, etc. By operating the hot water key, the following two messages will be displayed:

BREWING

rature, close the knob and immediately clean the spout with a damp cloth. Attention: the spout is hot, it may cause burns! Cappuccino Through the special Cappuccinatore, this machine can brew a real cappuccino without any problem. By pressing the cappuccino button, these two messages will be alternately displayed:

This happens because the machine, as mentioned before, can dispense two products at the same time. During hot water dispensing, only the programmed amount is dispensed if the corresponding programming is enabled. On the contrary, dispensing should be stopped by pressing again the selection key when the desired amount is reached. If hot water only is dispensed, dispensing is faster than when coffee is dispensed at the same time. To program the hot water amount, it is necessary to keep the corresponding selection key pressed till the desired amount is reached. Attention: hot water can only be programmed if the corresponding programming function is enabled (see page 83). During the programming phase, the following message will be displayed:
"STEAM "READY FOR USE "SELECT PRODUCT "READY FOR USE
This happens because the machine, as mentioned before, can dispense two products at the same time. Direct steam/hot water spout (7) on cup holder grill (3) and slightly open knob (9), turning it counterclockwise. Wait until the remaining water has flown out of the spout. Then, move the spout outwards and plunge it deeply into the fluid to be heated. 37 Slowly open the steam/hot water knob and heat the fluid, with a circular movement from the bottom to the top. When the fluid has reached the desired tempe-
to the special electronic protection system. Important: Do not start the machine before the foreign body has been removed, otherwise the motor may be damaged. Procedures: see page 92, points 45-49. Cleaning and maintenance operations General cleaning To ensure a good coffee quality and a longer working life, always keep the machine clean.
CLEANING AND MAINTENANCE OPERATIONS operations. Unloose the screws and rinse the dispensing tube thoroughly with hot water. From time to time, clean the machine casing with a damp cloth and dry it. Clean pre-ground coffee container (14) with the aid of the brush supplied, whenever necessary. Central unit Clean central unit (22) whenever the coffee bean container is filled, or at least once a week. Switch off the machine and open service door (19). Remove grounds coffee container (1). 41 Remove central unit (22), by holding the handle and shortly pressing the PRESS key. Wash the central unit with hot water; do not use any solvent. 42 Make sure there are no coffee residues on the two steel filters: the upper filter can be removed by unloosening and turning the plastic pin anticlockwise using the tool supplied. Dry thoroughly each central unit component, fit the filter again and tighten it properly with the screw. 43 Remove coffee rest drawer (23) and clean it, using a non-abrasive solvent. Clean the service area thoroughly and fit the coffee rest drawer again. 44 By holding the central unit by its handle, slide it back into its original position, making sure it is correctly engaged. Then close the door. Fit the coffee grounds container again.

irreparable damages to the machine! Warning: if the central unit is not correctly fitted, the following message will be displayed:
DESCALING Assemble the grind ring support and make sure the blue marks coincide. 50 Turn the adjustment ring clockwise, to make the red marks coincide. 51 Fit the adjustment lever on the ring, until it coincides with the previously set grinding degree. Cappuccinatore 52 To quickly clean the cappuccinatore, immerse the suction pipe into warm water and let water flow through it. For a more accurate cleaning, remove the cappuccinatore and open cover (29). Clean the outside part with warm water and rinse it with cleaned water. Descaling Attention: The descaling operations mus be carried out when the machine components are cold. Descaling removes limescale from all surfaces and holes, thus ensuring a perfect operation of valves, heating controls and other important parts. Note: due to the complexity of the coffee machine hydraulic circuit, the following descaling cycles (automatic and standard) do not allow the descaling of all tubes. In fact, easily accessible components such as the central unit (22) and its plastic connection are excluded. The machine must be descaled every 3-4 months, depending on the water hardness degree. A more frequent descaling is recommended wherever the water hardness degree is very high. To avoid dangerous delays to users, this machine is supplied with a special control counter, reminding the user to perform this operation, according to the water hardness degree.

"BREW UNIT MISS

The machine cannot dispense coffee. Coffee grinder
Before cleaning the machine, turn off the main switch, unplug the machine and wait until it cools down.
Never fill the coffee grinder with water: it may irreparably damage the machine! 45 Clean the coffee beans container periodically; this operation should be accomplished by a qualified technician! Unplug the machine. Empty the coffee container and unloose the two fastening screws. Now, the container can be removed and cleaned. 46 Carefully pull the adjustment lever upwards, previously writing the set grinding degree. 47 Turn the adjustment ring counterclockwise, until the blue marks coincide. 48 Now, it is possible to remove the grinding ring from the machine, slightly pulling it upwards. 49 With the aid of a brush or a narrow vacuum hose, clean both the gear box and the grind ring support. Make sure the position of the grind ring does not shift. To reassemble the coffee grinder, carry out the reverse sequence, making sure the adjustment ring has not been shifted during cleaning. If that is the case, turn it until the blue mark coincide with one of the three notches.

Do not immerse the machine into water or other fluids: it may be irreparably damaged!
Do not wash parts of the machine in the dishwasher!
Always handdry all parts of the machine, do not dry them in the oven or microwave oven! Water tank, drip tray, coffee grounds container and coffee dispenser 39 In order to keep the service area and the central unit (22) clean, daily empty the coffee grounds container (1), after machine use. The water tank (11), drip tray (2), cup holder grill (3) and coffee grounds container (1) should be washed periodically, using a non-abrasive solvent and drying them carefully. 40 Coffee dispenser (4) may be removed for cleaning
When fitting the central unit, do not press PRESS button: it may cause
In this case, the following message will be displayed:
DESCALING Pour a discaling solution into the water tank (according to the instructions on the product package). Switch the machine on the programming mode. Place a large container under the steam/ hot water spout and open slowly the steam knob. The automatic descaling starts: Small amounts of descaling solution are pumped into the circuit. Then the pump stops to let the solution take effect. During this phase, the following message is displayed:
The following message will be displayed:
DESCALING occurring as a result of the non-observance of descaling procedures, improper use and nonobservance of any other instruction contained herein. Maintain the manufacturers adjustment if the water hardness degree is not known. Disposal Machines which are no longer operational should immediately be made non serviceable, by cutting the power cord. Machines should be delivered to a public disposal centre. Switch off and unplug the machine if it will not be used for long periods. Cut the supply power cord and deliver the machine to a public collecting point.

"DESCALING

"RESET DESCALING " "NO "
By means of the same keys , it is possible to modify the value; Yes or no. Through this reset operation, the internal counters of the two water systems are reset and the message DESCALE is erased. If the function
When this message is displayed, the machine does not stop; however, it is suggested to descale quickly the machine. To cancel the message, see programming menu indications, point 14. The machine has been adjusted on a 25H value, which causes the warning light to switch on after 150 l approx. Should it be necessary, the water hardness value may be exactly programmed, following the instructions shown at page 82. The following adjustments are possible: Hardness 4: high water hardness, over 29H (14dH), i.e. 80 l water approx. Hardness 3:medium water hardness, approx. 20-29H (7-14dH), approx. 150 l water passage. Hardness 2:soft water, approx. 12-20H (4-7dH) approx. 300 l water passage Hardness 1:very soft water, less than 10H (3dH), approx. 500 l water passage In hard water regions, a filter should be used both to improve the coffee quality or to protect the machine, thus reducing the descaling frequency. Note: for this purpose, use a descaling product suitable for coffee machines. Never use vinegar! Descaling can be performed in two ways: Automatic descaling Select this mode in the programming menu (see page 84). By means of keys , move the asterisk at the end of the line on the menu itemDescaling and confirm the selection with the ENT key. The following message will be displayed:

"MACHINE IS "DESCALING

"SIGN. DESCAL.

After approx. 45 minutes, when the procedure is accomplished, the following message will be displayed:
"DESCALING "FINISHED
is selected without the displayed message Descale, the following message will be displayed:
Close the steam knob. The pump stops. Press ENT button. A display message reminds you to rinse away any possible descaling residues from the machine.
"QUANTITY WATER "NOT REACHED
Should the machine not be used anymore, switch it off and unplug it.

"RINSE MACHINE

Remove water tank, rinse it accurately and fill it with fresh water. Clean the machine using the hot water knob and let the whole tank content flow out. The following message will be displayed:
Standard descaling Switch off the machine. Pour a descaling solution into the water tank (according to the instructions on the product package). Place a large container under the steam/hot water spout (7). Switch the machine on by pressing the main switch, press the hot water key and let the descaling solution in the water tank pour out of the spout for 1 minute approx. Press hot water key to complete the operation. Switch the machine off and let the solution taking effect for 5 minutes approx. Repeat this procedure two or three times, to empty the water tank. As soon as descaling has been performed, rinse the water tank (11) thoroughly and fill it with fresh water. Switch on the machine again and let water (2 l approx.) flow out of the steam/hot water dispensing tube in order to rinse away residues. Important: A periodic descaling ensures a correct machine functioning and avoids expensive repairs. The machine warranty does not cover damages
Keep the machine in a dry place, far from the reach of children. Should the machine not be used for a long period, keep it from dust and dirt Maintenance Periodically check the machine working and clean it in accordance to the instructions. Troubleshooting
"RINSING "FINISHED
Press the hot water key again. Go back to programming function by pressing theENT key. Note: By pressing the ESC key, it is possible to quit descaling procedure. Reset descaling message In programming function, by pressing keys
In case of failure, fault or suspected damage following a fall, unplug the machine immediately. To fix problems, follow the instructions in the table. Otherwise contact authorised personnel. Only skilled personnel are authorised to repair the machine. The user might incur serious injuries should repairs not be properly carried out. The manufacturer declines any liability whatsoever, should repairs fail to be carried out according to the instructions contained in this manual: Furthermore in these cases warranty rights cannot be honored.
move the asterisk till the end of the line on the menu Sign. Descal and confirm the selection with ENT button.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REPAIR SHOULD BE DONE BY AUTORIZED SERVICE PERSONNEL ONLY