D16 1. Introduction

Dear customer: Thank you for purchasing a DECT SAGEM telephone we appreciate your trust in us. This product was manufactured with the utmost care, should you encounter difficulties during its use. We recommend that you refer to this user guide. You can also find information on the following site: http://www.sagem.com/faq For your comfort and safety, we ask that you read the following paragraph carefully:
English 2. Before you begin
Make sure your package includes the items: 1. Base unit, 2. Handset, 3. One battery compartment cover, 4. Handset battery, 5. Telephone line cord, 6. AC power supply. In the case of purchasing a pack duo or trio, you will find in addition for each additional handset: 1. A handset charger, 2. An additional battery flap, 3. One battery compartment cover.
You can change the display on the screen saver. For this purpose, press and hold down the key.
English 2.5. Quick guide to handset display icons
Signal strength icon (blinking when no signal or the signal strength is weak). Call (icon is blinking when a new call is in the caller list). Handset ringer muted. Received call list (appears when a new call is in the caller list). Memory. Charging status icon ( blinking during charging). :Full; + flashing (charger not connected) : Flat;
D16 4. Calls 4.1. Cordless phone basics

4.1.1. Make a call

Ensure that the handset is switched on. 1. Press the Talk key , you will hear the dialling tone and the display will show you the

English

4.1.8. Microphone mute function
During a call you can switch OFF the microphone. The call is placed on hold. key during - Enable MUTE function: Press the shows "Mute on". Your correspondent will not be able to hear you. - Disable MUTE function: Press the key to continue the call. a call. The display
To return to the previous display, press and hold down the key
Place the handset in the base station to charge for 15 hours prior to first use. if you dont properly charge the phone, battery performance will be compromised. 9. Plug one end of the telephone line cord into the modular wall phone jack and the other end into the jack on the base. 10. After charging, press key, you can hear dial tone.

4.1.9. Recall / Flash

Press the Company. key to access line transfer offered by PABX or call waiting provided by telephone
. phone icon 2. Enter the phone number. The number is dialled. - OR 1. Enter the phone number first and then press press key to remove the last digit. key or place the handset in the base station. key. If you make a mistake,
Recommendations and safety instructions
Your DECT telephone must not be installed in a humid room (wash-up room, bathroom, laundry room, kitchen, etc.) unless it is 1.50 m away from a water point or outside. Your telephone must be operated at temperatures ranging from 5C and 45C.
2.1. Digital security system
Your cordless phone uses a security system to provide protection against false ringing, unauthorised access and charges to your phone line. When you place the handset in the base, the unit verifies its security code. After a power outage or battery replacement, you should place the handset in the base for about 20 seconds to reset the code.
Only use the supplied power adapter, connect it to the base socket according to the installation instructions provided in this booklet and the indications on the identification label affixed to it (voltage, current, electric network frequency). As a safety measure, you can use the power adaptors to cut off the 230V current in case of danger. They must be located near to the device, and must be easily accessible.

4.1.10. Temporary tone

In pulse dialling, you can use temporary tone dialling to temporarily access touch-tone service offered by banks. 1. Press the key after call is answered.

2.3. Handset keys

Earpiece Screen Mute the microphone / Correction / Cancel Access to dialled number Access to menu / Validadate
2. Press the number key and follow the voice instructions. If you see the icon change into + flashing (charger not connected, that means your battery is low and your handset keyboard is not available to use, please put the handset in cradle of base to recharge your battery. 2. Ending a call press

Only use the supplied power adapter, connect it to the base socket according to the installation instructions provided in this booklet and the indications on the identification label affixed to it (voltage, current, electric network frequency). As a precaution, in case of danger, the mains adapters act as a disconnecting mechanism for the 230V power supply. They should be placed near the device and should be easily accessible. This telephone was designed for use on the public switched telephone network (PSTN). In case of a problem you must first contact your reseller. Only use the supplied telephone cord. Telephone cord is to be connected prior to opening the door. For your personal safety, never place your handset on the base without the batteries, or without the battery cover, you could get an electric shock. To avoid damaging your handset, only use certified rechargeable AAA batteries NiMH 2.4 V 550 mAH, never use non rechargeable batteries. Insert the batteries in the handset battery compartment respecting polarity. At the end of their useful life, batteries must be disposed of according to the recycling instructions presented in this booklet. Your DECT telephone has an inside radio range of about 50 metres and up to 300 metres in open space. The immediate presence of metal parts, (of a television for example), of any electric appliance may result in range reduction. In areas where storms are frequent, we recommend that you protect your telephone line using a surge protection device. This equipment does not function in the case of an electric network shutdown: for emergency calls, it is recommended to use another unit during power cuts. The CE marking certifies that the product meets the essential requirements of Directive 1999/5/CE of the European Parliament and of the Council pertaining to microwave radio equipment and telecommunication terminal equipment, for the safety and health of users, for electromagnetic interference. Furthermore, it efficiently uses the frequency spectrum attributed to ground and spatial communication to prevent damaging interference. The declaration of compliance may be looked up on the www.sagem.com site, section "support" or can be obtained from the following address: Sagem Communications - Customer relations department 4, rue du Petit Albi - 95800 Cergy Saint-Christophe - France

4.1.2. Auto talk off

Placing the handset in the case cradle while the handset is off the hook (during a call) automatically hangs up the handset.

3. After you hang up, the phone automatically returns to dial pulse (rotary) service.
2.2. Installing the phone
4.1.11. Paging the handset
To locate a misplaced handset: Press the key at the base station, "paging" flashes on the screen of the handsets registered on the base
4.1.3. Answering a call (Refer to paragraph 7.4 page 11)

3. Menu structure

Navigation key up / Access the caller list
1. When the phone rings, press the - OR

key to answer the call.

on your D16 base station until you press a handset key or until you press station again.

Battery wire

phonebook

new entry list

personal set
handset name handset tone
1. If AUTO TALK MODE is ON, pick up the handset from the base station to answer. 2. Ending a call press key or place the handset in the base station.
4.2. Calling line identification presentation (CLIP)
This CLIP phone stores and displays CLIP information provided by your local telephone company. You must subscribe to CLIP service in order to use this unit. If you have not subscribed to CLIP service or if the caller number is suppressed, the display shows unknown.

Bloc battery

Talk on Talk off / Switch handset on/off Activate, deactivate keypad lock Access to phonebook Navigation key down /
edit entry delete entry delete all direct mem.

language auto hang-up

2.4V 550mAh

4.1.4. Handset volume

You can adjust the volume of what you hear through the handset at any time by pressing or key. You will hear a beep with each key press. You will hear a double beep when you reach the highest or lowest setting.
Power socket telephone socket

4.2.1. Caller list

CLIP of incoming Call are stored in the CALLER LIST menu. When you enter the CALLER LIST menu, the display will show icon Caller List stores the last 20 incoming calls and call time. The list contains the numbers of the last 5 callers.

4.1.5. Caller timer

Deactivate handset ringer Recall/Flash Internal call

1. 2. 3. 4. 5.

Remove the battery compartment door of handset. Insert battery pack and connect the cord from left direction into the jack inside the handset. Put the compartment door back on. searching. appears on the screen. Plug the power supply cord into AC outlet and the other end into the power jack on the base bottom. A welcome message in all the languages supported by the telephone is displayed on the screen, press

advanced set

changer pin registration unregister country
After you press Talk key on the handset, the built-in call timer shows in the display (after 10 seconds) and counts the length of time of the call on minutes and seconds.

clock&alarm

date / time

Microphone

4.1.6. Ending a call
set format alarm alarm tone
To end a call press. The timer remains displayed on the screen for 10 seconds. You can, however, return on the screen saver by pressing
4.2.2. Display of numbers not available
Unavailable: you are not in same area as your contact. Hide id: your contact does not want their number to be displayed.

2.4. Base Station

Handset location Base button Pressed briefly: - telephone set paging. Held down (4 seconds minimum): - telephone set registration.

or keys, press

4.2.3. Accessing the caller list menu
1. Press the key to enter the Caller List menu. The display shows the recent caller phone number (up to 12 digits). 2. Press the or key through the caller List.

6. 7. 8.

Select the country using
reset auto prefix recall time dial mode first ring

4.1.7. Redialling a call

The last five numbers you have dialled can be quickly redialled. Redialling from Standby Mode: 1. Press key. The phone number that was last dialled appears on the display. key to review redial telephone list. (You can select to redial your last five
A screen asks you to confirm your choice. Press You will hear a confirmation tone. The screen saver is displayed.
4.2.4. Calling back a caller
1. Press the key to enter the caller list menu. or key to select a call record. 2. Press the 3. Press the
or 2. Press the numbers called). 3. Press
: depending on country -2-3-4-
key to dial out the number. -5-
key to dial the number. -6-
4.2.5. Deleting caller list record
1. Press the 2. Press the 3. Press key to enter the caller list menu. or key. key to select a call record.
English 5.3. Editing a memory
1. Press , "phonebook " appears on the screen. Press. 2. Using the or key, select "edit entry ". Press. The list of phonebook entries organised in alphabetical order appears. Select the entry you want to edit using or. 3. You will then enter the name input screen and the cursor will be at the end of the name: - The information is accurate. Press - To correct the name, press - If you do not wish to delete the current record, press - To delete the current record, press. Enter the new name and press key. key. key to delete characters.
4. "edit " appears on the screen, Press. to to confirm.
If the called handset does not answer, press to take back the call.

D16 7.2. Tone settings

7.2.1. Handset ringer level
You can choose from four ringer volumes. 1. Press 2. Using the , select "personal set" using the or or key, Press.

English 7.5. Key lock

You can lock the keypad to prevent inadvertent activation. key for 1 second, when the keypad lock is switched ON, the display 1. Press and hold will show "keys locked". 2. To recover to normal, press and hold cradle. key 1 sec or replace handset into the base
5. You will then enter the name input screen. Enter the name of the entry and press confirm. 6. You will then enter the number screen. Enter the number of the entry. press You will hear a confirmation tone.
Making conference calls (3-way conversation) You can connect one external call to two handsets registered at the base station. All users can talk and listen simultaneously: 1. 2. 3. Press key. The external user is put on hold. the internal call number. Wait until the internal user answers. key, until an aural signal is heard to start a three-way conference. Press and hold "conference" is displayed on the handset screen.
- Select "delete entry" to delete the current record. - Select " delete all to delete the entire Caller list. 4. A confirmation screen appears :
5.5.1. Calling an abbreviated number
To call the number you have assigned to one of the shortcut keys: 1. Hold down the key on which the number was programmed (1 or 2). 2. The number is displayed on the screen and is automatically dialled.
key, select "handset tone" Press.
3. "ring volume " appears on the screen. Press 4. Use 5. Press or to select the volume level. key to confirm your selection.
8. PHONE setting 8.1. Time and date
1. Press , select "clock&alarm" using the or key, Press.
4. You will then enter the number screen and the cursor will be at the end of the number: - The information is accurate. Press - To correct the number, press Enter the new number and press or to select the desired key. key to delete the numbers. key.

5.6. Inserting a pause

You can insert a pause in the dialling sequence. Wait for a dial tone before you press pause time is fixed to 3 seconds. Press and hold key during edit mode to inset the pause. The display shows an P. The
5. The record or the entire Caller list is deleted. You will hear a confirmation tone.

6.3.2. Two outside calls

Taking a second call while you are already on line During a call, a beep is emitted by your operator to inform you that a second call is on hold. A screen displays the number of this second caller on hold. to take back this new call. Press Your first contact is put on hold and you can talk with the second caller. Making a second call while you already on line During a conversation, press then dial the number to be called. The call in process is then put on hold and you can take the second call back. Switching from one call to the other To switch from one call to the other, press then the key. The call in process is then put on hold and you can take the second call back. Ending one of the two calls To end one call and continue with the other, press then the key. The call in process is then ended finally and you take the second call back. To set up a 3-way conference (the 2 calls and yourself) During a conversation, press then the key. You can then talk with the 2 contacts at the same time. To end the 3-way conference, press the red key.

to select the ring tone. key to confirm your selection.
. 3. Enter the name of the entry. Press The entry is stored in the phonebook. You will hear a confirmation tone.

7.2.3. Key tone On/Off

This function allows you to activate or deactivate tones being heard when pressing the keypad. 1. Press 2. Using the 3. Using the 4. Use 5. Press or , select "personal set" using the or or or key. Press.
If the number is too long (more than 12 digits), the screen will not show the number in full. Press key to go to last number page for CID length.

key to set aM and the

key, select "handset tone". Press key, select "key beep". Press

5. Phonebook

You can store 50 phonebook entries in your phonebook. Each phonebook entry can contain the name of your contact which can be a maximum of 12 characters long (spaces included), your contact's telephone number up to 24 digits.

Note !

If you enter the wrong digits press C key
to delete the incorrect digits.
to select "ON" or "off" setting. key to confirm your selection.
8.2. Date format / Hour format

8.2.1. Hour format

1. or key, Press. 2. 3. 4. 5. Press Using the Using the Use or Press , select "clock&alarm" using the or or key, Press. key, select "set format". Press
6.2. Answering an internal call
1. The ring melody from an internal call is different from an external call. "intercom " and the calling handset number appear on the screen. " " is blinking. 2. Press the key to answer. The " " stop blinking. key.
To delete the entire phonebook list, select "delete all", press A confirmation screen appears:
7.3. Modifying the language
1. 2. Press Using the Using the Use or Press , select "personal set" using the or key, select "language". Press
5.1. Dialling a memory number
1. press key. or key to view the phonebook locations. 2. Press the 3. Press
- If you do not wish to delete the entry, press - To delete the entry, press key. the entire phonebook are deleted. You will hear a confirmation tone.
3. Ending an internal call press the
or key, select "time format". Press to select format.

6.3. Call management

6.3.1. An external and an internal call
Transfering an external call to another handset registred on same base 1. 2. 3. During a call, press. The external user is put on hold. Enter the internal call number. When the user answers, you can announce the call. Press the key to transfer the call.
key. The display number is dialled.

5.5. Assign a shortcut

This menu allows you to record two quick dial numbers assigned to the keys 1 and 2 on the keyboard.
7. Customising the handset 7.1. Handset naming

This function allows you to change the name of your handset. 1. Press , select "personal set" using the or key, Press.

3. 4. 5.

or key, select "key beep". Press to choose the desired language.
key to confirm your selection. You will hear a confirmation tone.

8.2.2. Date format

This function allows you to define the date format (JJ/MM ou MM/JJ). 1. 2. 3. 4. 5. Press Using the Using the Use Press or , select "clock&alarm" using the or or or key, Press.

5.2. Storing a memory

1. Press , "phonebook " appears on the screen. Press. key to confirm the name. 2. "new entry" appears on the screen, press 3. Enter the name of the entry. Press
7.4. Auto talk (Refer to 4.1.3 Answering a call page 5)
When active, the auto pick up feature enables you to automatically pick up as soon as you remove the handset from its base. 1. Press 2. Using the 3. Use or , select "personal set" using the or or key. Press.

1. Press

Your voice mail number is not factory set and you can assign it to the key , "phonebook " appears on the screen. Press or or key, select "direct mem.". Press.
key, select "set format". Press key, select "date format". Press
2. "handset name " appears on the screen. Press. - Use the keypad to enter the new name (up to 10 characters). - Use key to delete wrong input if necessary. key to confirm your selection. You will hear a confirmation tone
2. Using the 3. Using the
key, select "auto hang-up". Press
key. 4. Enter the number of your entry using the keypad keys. Press The entry is stored in the phonebook. You will hear a confirmation tone. -7-
keys, select the key you want to assign a number (1 or 2) to and press.
To switch from one call to another, press and hold down the "*" key until an aural signal is heard.
to select "ON" or "off" setting. key to confirm your selection. You will hear a confirmation tone. - 11 -
to select format. key to confirm your selection. You will hear a confirmation tone.

3. Press

, "no number" is displayed on the screen. Press -8-

4. Press

- 10 -

- 12 -

D16 8.3. Alarm clock
To set the date and time : 1. Press 2. Using the , select "clock&alarm" using the or key, select "alarm". Press or. key, Press.

12. General product care

- To keep your telephone working and looking good, follow these guidelines: - Avoid putting the phone near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). - DO NOT expose to direct sunlight or moisture. - Avoid dropping and other rough treatment to the phone. - Clean with a soft cloth. - Never use a strong cleaning agent or abrasive powder because this will damage the finish. - Retain the original packaging in case you need to ship the phone at a later date.
- To cancel the reset, press. 4. You will hear a confirmation tone : the settings of your phone are restored to their initial values.
. Using the or key, select "first ring". Press - select "ON" using the or key, to activate the first ring. - select "desactiver" using the or key ou to deactivate the first ring. Press key to confirm your selection. You will hear a confirmation tone.

9.6. Prefix

If a PABX is used in a private network, you can program the outside call prefix. This function sets: the PABX prefix number: this number will be added at the beginning of the number you dialled. the number to be detected: if the number you dialled starts with the recorded sequence, this sequence will be automatically deleted. These two settings are not applied if number you dialled starts with "#" or "*". 1. Press. Select "advanced set" using the or or key, press.
6. Once the handset is registered, you will hear a confirmation tone. The handset automatically exits the registering mode. 7. The handset number assigned automatically by the base appears on the screen.
10. Call log 10.1. Received call log
If you have subscribed to a "Caller display" service, The received call log presents the calls you received. (max. 5 last calls). To consult the list: 1. 2. Press briefly key. The most recent name or call number is displayed according to whether your contact's number is included in your phonebook or not. - If it is a private number, the screen displays "Hide id". - If you are not in same area as your contact, the screen displays "unavailable". Press to display the date and the time of the call.

User Guide

9.3. Disassociation handset
This function allows you to de-register a handset from your base. 1. Press. Select "advanced set" using the or or key, press.
13. Troubleshooting 13.1. Causes of poor reception
Aluminium siding. Foil backing on insulation. Heating ducts and other metal construction can shield radio signals. You are too close to appliances such as microwaves, stoves, computers, etc. Atmospheric conditions, such as strong storms. Base installed in the basement or lower floor of the house. Base is plugged into an AC outlet with other electronic devices. Baby monitor is using the same frequency. Handset battery is low. You are out of range of the base.

8.4. Modifying alarm tone
1. 2. 3. 4. Press , select "clock&alarm" using the or key, Press. Using the or key, select "alarm tone". Press 3 melodies are available : "melody 1", "melody 2" and " melody 3". Select the desired melody. Press key to confirm your selection. You will hear a confirmation tone.

2. Using the

key, select "unregister". Press
3. Enter the 4 digit base master PIN code (default 0000). Each time a digit is entered the _ is replaced by a *. Press key to confirm.
key, select "auto prefix". Press
3. Select "detect digit" to define the number giving you access to the outside line. 4. Select "prefix" to specify the digits before prefix. 5. Press key to confirm your selection. You will hear a confirmation tone.
Advanced settings 9.1. Base master PIN code
Your base station code (default setting 0000) is required to access certain security functions. This code can include 8 digits. 1. Press. or key, press.
4. Select the handset you want to delete (at standby state, "pls reg h/s" is displayed on the screen). You will hear a long beep confirmation tone.

10.2. Diallled call log

The dialled call log presents the calls you made (max. 5 last calls). To consult the list: 1. 2. 3. Press briefly The last dialled number is displayed. to recall this number, press key.

9.7. Flash timing

If you connect your telephone to a private automatic branch exchange or use it in a foreign country, you may need to modify the flash duration in order to use your telephone correctly with regard to the following functionalities: outgoing 2nd call, incoming 2nd call, conference call. Contact your administrator, who will supply the appropriate time period, and proceed to the new settings. 1. Press 2. Using the. Select "advanced set" using the or or key, press.
13.2. Troubleshooting tips

13.2.1. Caller id

Problem Solution Is battery fully charged? Try replacing the battery. Make sure the battery is properly installed and connected. If you are using AC power, make sure that the unit is connected to a nonswitched electrical outlet. Disconnect the unit from the plug and plug it in again. Did you order Caller ID service from your local telephone company?
9.4. Modifying the country
1. Press 2. Using the. Select "advanced set" using the or key, select "country". Press or key, press.

11. Changing the battery

Make sure the telephone is OFF before you replace battery. 1. Remove the battery compartment door. 2. Disconnect the cord attached to the battery pack and remove the battery pack from the handset. 3. Insert the new battery pack and connect the cord into the jack inside the handset. 4. Put the battery compartment door back on. 5. Place handset in the base to charge. Allow the handset battery to properly charge (for 12 hours) prior to first use or when you install a new battery pack. If you do not properly charge the phone, battery performance will be compromised.

No display

3. Enter the 4 digit base master PIN code (default 0000). Each time a digit is entered the _ is replaced by a *. Press 4. Using the or key to confirm.
Select "advanced set" using the 2. 3. 4. 5.
key, select "recall time". Press
. "change pin " appears on the screen. Press The base station code entry screen is displayed. Enter your old code first. Each time a digit is entered the _ is replaced by a *. to confirm. Press Enter your new PIN code. Each time a digit is entered the _ is replaced by a *. Press key to confirm your selection. You will hear a confirmation tone.
3. Three choices are available : " short ", " medium " and " long ". 4. Select the appropriate time period. 5. Press key to confirm your selection. You will hear a confirmation tone.
key, select the country where you will use the telephone. Press
. 5. A confirmation screen appears, press The message "wait." appears on the screen. You will hear a confirmation tone.
9.8. Modifying the dialing mode
Most telephone systems use the tone dialling mode. You can, however, use the pulse dialling mode. To select a dialling mode, follow this procedure: 1. Press. Select "advanced set" using the or key, press.
Carefully note your base station code. You will need it to change certain settings.
Danger of explosion if battery is incorrectly replaced. Replace only with 2,4V 550mAh type or equivalent rechargeable battery pack. Do not dispose of the battery in a fire. The cell may explode. Check with local code for possible special disposal instructions.
2. Using the or key, select "dial mode". Press Two modes are available: "tone" et "pulse". 3. Press - 13 - 14 -
key to confirm your selection. You will hear a confirmation tone. - 15 - 16 - 17 -

13.2.2. Telephone

Problem No dial tone Solution Check installation: - Is the base power cord connected to a working outlet? - Is the telephone line cord connected to the base unit and the wall jack? Disconnect the base from the wall jack and connect another phone to the same jack. If there is no dial tone in the second phone, the problem might be your wiring or local service. Is the handset out of range of the base? Make sure the battery is properly charged (12 hours). Is the battery pack installed correctly? Did the IN USE indicator come on? The battery may need to be charged. Dial tone is OK, but cant dial out Handset does not ring Make sure the tone/pulse setting is correct. Make sure the RINGER setting on the handset is programmed to ON. You may have too many extension phones on your line. Try unplugging some phones. See solutions for NO dial tone. Change channels. Is handset out of range? Move closer to the base. Does the base need to be relocated? Charge battery. Make sure base is not plugged into an outlet with another household appliance.

D16 14. Guarantee Terms and Conditions for United Kingdom only
In order to supply the guarantee, you should contact your dealer or Sagem Communications Helpdesk. The proof of purchase will be required. Please make usage of your equipment for the purpose for which it was designed and under normal usage conditions. Sagem Communications do not accept any liability for any usage made out of the frame of its original designed purpose and any consequence that may arise from this usage. Should any malfunctioning arise, the dealer or Sagem Communications Helpdesk will advise you what to do. A) General Guarantee conditions SAGEM undertakes to remedy by repair or exchange at its own convenience, free of charge for labour and replacement parts, any defects in the equipment during the guarantee period of 12 twelve- months (3 -three- months for accessories), from the date of original invoice of the Equipment, where those defects are a result of faulty workmanship. Unless the customer has concluded with SAGEM a maintenance contract in respect of the equipment which specifically provides for repairs to be carried out at the customer's premises, the repairs will not be carried out on the equipment at the customer premises. The customer must however return the defective equipment at his/her own expense, to the address given by the dealer or Sagem Communications Helpdesk. In case a product needs to be sent in for a repair, it always has to be accompanied by a proof of purchase (which is not altered, written on or in any way be made illegible) showing that the product is still under warrantee. In case no proof of purchase is enclosed, the SAGEM repair center will use the production date as a reference of establishing the warrantee status of the product. Apart from all legal obligatory rules, Sagem Communications, do not give any Guarantee, either implicit or explicit which is not set force in the present section, and could not be hold responsible for any direct or indirect, material or immaterial damage, in or out of the frame of the present guarantee. If any provision of this guarantee shall be held to be in whole or in part invalid or illegal due to an obligatory rule applicable to consumers pursuant to their national legislation, such invalidity or illegality shall not impair or affect the remaining provisions or parts of this guarantee. This guarantee does not affect the Customer statutory rights. B) Exclusions From Guarantee SAGEM shall have no liability under the guarantee in respect of: ) Damage, defects, breakdown or malfunction due to one or more of the following: Failure to properly follow the installation process and instructions for use An external cause to the equipment (including but not limited to: lightening, fire, shock, vandalism, inappropriate conditions of electrical network or water damage of any nature) Modifications made without the written approval of SAGEM Unsuitable operating conditions, particularly of temperature and humidity Repair or maintenance of the equipment by persons not authorized by SAGEM ) Wear and tear from normal daily use of the equipment and its accessories ) Damage due to insufficient or bad packaging of equipment when returned to SAGEM ) Usage of new versions of software without previous approval of SAGEM

) Work on any equipment or software modified or added without the prior written consent of SAGEM ) Malfunctions not resulting from the Equipment or from software installed in user workstations for the purpose of use of the equipment. Communication problems related to an unsuitable environment including: Problems related to access and/or connection to the Internet such as interruptions by access networks or malfunction of the line used by the subscriber or his correspondent Transmission faults (for example poor geographical coverage by radio transmitters, interference or poor line quality) The local network fault (wiring, servers, workstations) or the failure of the transmission network (such as but not limited to interferences, fault or poor quality of the network) Modification of the parameters of the cellular network carried out after the sale of the Product ) The normal servicing (as defined in the user guide supplied with the equipment) as well as malfunctioning due to servicing not being carried out. Servicing costs are in any event always borne by the customer. ) Malfunctions resulting from the usage of products, consumables or accessories not compatibles with the equipment.

D16 15. Environment

.....................................................................................................
In this way you can participate in the re-use and upgrading of Electrical and Electronic Equipment Waste, which can have an effect on the environment and human health. To facilitate recycling, please respect the sorting rules set up locally for this kind of waste. Preservation of the environment is an essential concern of Sagem Communications. The desire of Sagem Communications is to operate systems observing the environment and consequently it has decided to integrate environmental performances in the life cycle of its products, from manufacturing to commissioning, use and elimination.

15.1. Packaging

The presence of the logo (green dot) means that a contribution is paid to an approved national organisation to improve packaging recovery and recycling infrastructures.

15.2. Batteries

If your product contains batteries, they must be disposed of at appropriate collection points.
C) Out of Guarantee Repairs In the cases set forth in B) as well as after expiry of the guarantee period, the customer must ask the Authorized Sagem Repair Centre for a cost estimation. The repair and delivery costs will be invoiced to the customer. The foregoing shall apply unless otherwise agreed in writing with the customer and only for the United Kingdom. Helpdesk: - 12
...................................................

15.3. The product

The crossed-out waste bin stuck on the product or its accessories means that the product belongs to the family of electrical and electronic equipments. In this respect, the European regulations ask you to dispose of it selectively: At sales points in the event of the purchase of similar equipment. At the collection points made available to you locally (drop-off centre, selective collection, etc.).

You experience static, noise or fading in and out

13.3. Unit beeps

- Place handset in base for 20 seconds to reset the security code. If that doesnt work, charge battery for 15 hours. - Clean charging contacts on handset and base with a soft cloth. - See solutions for No dial tone. - Replace battery.

13.4. Memory dialling

- Did you program the memory location keys correctly? - Did you follow proper dialling sequence? - Make sure the tone/pulse setting is correct. - Did you reprogram numbers into memory after power outage or battery replacement.

- 18 -

- 19 -

- 20 -

253103706A

- 21 -