2-2 CARE AND SAFETY INFORMATION
Interference: Do not place the receiver near appliances that may cause electromagnetic interference (for example, loudspeakers). This could affect receiver operation and distort the picture or sound. Hard disk: This unit contains a hard disk. Please wait for the unit to go into standby mode before unplugging and moving it.

2-3 ENVIRONMENT

Preservation of the environment is an essential concern of Sagem Communication. The desire of Sagem Communication is to operate systems observing the environment and consequently it has decided to integrate environmental performances in the life cycle of its products, from manufacturing to commissioning, use and elimination.

2-3-1 PACKAGING

The presence of the logo (green dot) means that a contribution is paid to an approved national organisation to improve packaging recovery and recycling infrastructures. To facilitate recycling, please respect the sorting rules set up locally for this kind of waste.

2-3-2 BATTERIES

If your product contains batteries, they must be disposed of at appropriate collection points.

2-3-3 THE PRODUCT

The crossed-out waste bin stuck on the product or its accessories means that the product belongs to the family of electrical and electronic equipments. In this respect, the European regulations ask you to dispose of it selectively: -At sales points in the event of the purchase of similar equipment. -At the collection points made available to you locally (drop-off centre, selective collection, etc.). In this way you can participate in the re-use and upgrading of Electrical and Electronic Equipment Waste, which can have an effect on the environment and human health.
LU 456A PVR6200T_6600T_7200T UK.book Page 3 Mercredi, 11. janvier 2006 4:14 16

3. PREPARATION

3-1 ACCESSORIES SUPPLIED
Your receiver is supplied with the following parts: 1 remote control unit 2 batteries (AAA) for the remote control unit 1 Scart lead for connection to the television 1 AC/DC adapter and power cable 1 user manual

3-2 TERRESTRIAL ANTENNA

Very often, to get the best reception, you may simply need to adjust your antenna. Alternatively, you can connect a second antenna to your system. For further information, please contact your specialised distributor.
3-2-1 Standard outdoor antenna :
It is preferable to use an outside roof antenna that is designed to receive UHF channels between 21 and 69. However: If your building is equipped with an old antenna model, digital channels that are transmitted at high frequencies may be difficult or even impossible to receive. The problem can only be resolved by changing the antenna. If your building is equipped with an antenna system that contains a filter and channel selector, reception will most probably not work correctly. In this case, you will need to contact the authorities in charge of the building. Some antennas directed towards an analogue transmitter must be re-adjusted towards a digital TV transmitter. If you encounter reception problems, you can also try placing the antenna at different heights.

3-2-2 Indoor antenna and antenna installed on a balcony or window :
In ideal reception conditions, this type of antenna is sufficient. However, a few notes and tips are given below: Use an antenna that is designed to receive channels 21 to 69. Install the antenna close to the window and direct it towards the digital TV transmitter. If possible, use an antenna with an amplifier.
LU 456A PVR6200T_6600T_7200T UK.book Page 4 Mercredi, 11. janvier 2006 4:14 16

4. REMOTE CONTROL UNIT

4-1 REMOTE CONTROL UNIT
Do not forget to point the remote control unit towards the receiver when using it.
FUNCTION Radio: Access radio mode Switch on/place the receiver in standby TV-AUX: Manage the Scart outputs and Teletext functions On-screen options Access the channels and various on-screen options Access Teletext Display programme information Access PHOTO mode on the PVR6600T Access the programme guide Access the menus Move in a page, menu. Validate a function or option Go back to the previous screen or mode Exit a screen or mode Raise or lower the volume level Turn the sound off Change channel Access the recording list Rewind a recording Pause Play a programme Fast forward a recording Stop Record
The remote control units functions in PHOTO MODE are explained separately see Function of the remote control unit keys in PHOTO MODE, page 17.

4-2 BATTERIES

The remote control unit requires two batteries (AAA) to operate. The diagram in the battery compartment indicates how to install them. The batteries supplied are not rechargeable.
LU 456A PVR6200T_6600T_7200T UK.book Page 5 Mercredi, 11. janvier 2006 4:14 16

5. QUICK INSTALLATION

Before connecting this product, please ensure that Digital Terrestrial Television is available in your region.
5-1 INSTALL TOP UP TV CARD (only PVR 7200T series)
To access, Top Up TV channels, you may turn the receiver and place the smard card as indicated below.

5-2 CONNECTIONS

Before installing your Receiver, please check that your delivery is complete: user manual, remote control unit, batteries (X2), Scart lead and AC/DC adapter. Please ensure that the appliances to be connected together (Receiver, TV, VCR.) are unplugged before making any connections. Connect the appliances together as shown in the diagrams and plug them back into the power socket. For optimum quality, connect the Scart lead to the TV Scart socket that is marked with 3 dots (RGB).
To connect peripheral equipment, see PERIPHERAL CONNECTIONS, page 26.

LU 456A PVR6200T_6600T_7200T UK.book Page 6 Mercredi, 11. janvier 2006 4:14 16

5-3 FIRST INSTALLATION

After connecting the Receiver correctly, a first time installation must be carried out. Switch on your Receiver (Do not forget to switch on your television at the same time). A welcome screen is displayed. When the Receiver is ready, press to start the installation. and and validate by pressing.
Select the language and country (UK) with the keys
The receiver automatically searches for the available channels. If no channels are found, the receiver proposes that you adjust the antenna. Enter a channel number (consult the list of channels that transmit in your sector). Adjust the antenna until the level and quality signals become green. Press to go back to the channel search.
If problems persist, please contact your specialised distributor or the Sagem Communication Hotline.

UK Hotline: 48 081*.

* 0.15 /min, tariff cost effective form 06/27/2005.
LU 456A PVR6200T_6600T_7200T UK.book Page 7 Mercredi, 11. janvier 2006 4:14 16

6. INSTALLATION MENUS

6-1 ICONS
Recording timers User settings Receiver settings Photo player Recording list

Technical informations

Favourite lists

Electronic program guide

6-2 USER SETTINGS
To move in the screens and change the various settings, simply use the keys , , , to indicate your selections, to validate and to quit the screens. To access the user settings screen, press. Once you are in the main menu, select USER SETTINGS.
6-2-1 Changing the Receiver code (access code)
In USER SETTINGS, select CHANGE RECEIVER CODE. This code is used and requested to lock the installation, Receiver, channels and recordings. The default access code is 1234. If you enter 0000, the control functions are disabled.

6-2-2 Language selection

In USER SETTINGS, select LANGUAGE SETTINGS. In the language menu, select the desired language for the menus, audio and subtitles.

6-2-3 User preferences

In USER SETTINGS, select USER PREFERENCES. Network monitoring: Network monitoring can be programmed. In this case, you will be informed each time a new channel or service is installed. Banner timeout and banner transparency: The banner display time and level of transparency can be set. Volume bar timeout: The volume indicator display time can be set. Country: Confirm your geographical location. Please rescan if you change the country.

LU 456A PVR6200T_6600T_7200T UK.book Page 8 Mercredi, 11. janvier 2006 4:14 16
6-2-4 Locking and parental consent
In USER SETTINGS, select LOCKING. Receiver locking: Completely locks access to the Receiver with a code. If you select YES, you will be prompted to enter your access code (1234 by default) each time you switch your receiver on. Channel locking: Enables locking for all the channels. If you select YES, you will be prompted to enter your access code each time you want to look at a channel. Channel to lock: To lock some channels only. You will be prompted to enter your access code each time you want to look at a locked channel. Level: to lock programmes that are rated at higher parental consent that the value entered. Select 03 for maximal control (all programmes rated will be blocked) or 18 (all programmes will be authorized). A record on a channel locked or a programme rated with an age higher than autorized will appear only in the the full list of recording.
6-3 Installing favourite lists
In MAINS MENU, select FAVOURITE LISTS. Selected list: By default, all the channels found during the installation are located in list A. There will be two distinct types of list: TV lists and RADIO lists. To create new lists (from B to H), simply select them, add (CREATE OR MODIFY) or delete channels.
6-4 RECEIVER INSTALLATION
To move in the screens and change the various settings, simply use the keys , , , to indicate your selections, to validate and to quit the screens. To access the Receiver installation screen, press. Once you are in the main menu, select RECEIVER SETTINGS. A code prompt is displayed: enter 1234 then (to change the code, see Changing the Receiver code (access code), page 7.

6-4-1 Channel search

In RECEIVER SETTINGS, select CHANNEL SEARCH. A bar indicates the search progress. If channels are found, a window is displayed prompting you to validate them. The number of channels in the list may be less than the number displayed when scanning, once the duplications have been deleted at the end of the search process. If no channel has been found, refer to the section Antenna signal to adjust the antenna.

LU 456A PVR6200T_6600T_7200T UK.book Page 9 Mercredi, 11. janvier 2006 4:14 16
6-4-2 TV, VCR and Home Cinema settings
In RECEIVER SETTINGS, select VIDEO AND SOUND SETTINGS. Use the arrows to navigate and select your options then validate. To select these options, refer to the manuals for your audio and video equipment. TV screen format: selection of display mode for your TV set - 4/3 Pan of scan, 16/9, 4/3 letter box. TV scart standart: selection of video standart (Pal or RGB) for the TV output. TV RGB output: selection of signal level (low, medium, high) for the RGB signals. AUX scart: selection of video standart (PAL - or S-VIDEO) for the AUX output. Digital Audio Output: selection of audio stream for the numerical audio output. If home cinema is selected, when an AC3 audio stream is broadcasted, this stream is sent on the numerical audio output otherwise it is the stereo data that is sent.
If you are not sure, leave the default settings (do not change them). Do not select "HOME CINEMA" mode except if the amplifier connected support this mode.
6-4-3 Return to the default factory settings
In RECEIVER SETTINGS, select RESET FACTORY DEFAULT. If you validate this option, all the channels and settings will be lost.
LU 456A PVR6200T_6600T_7200T UK.book Page 10 Mercredi, 11. janvier 2006 4:14 16

7. INFORMATION

The information contained in this menu may be requested if you contact your supplier or another service (For example, maintenance). This information concerns your receiver and the embedded software. In MAIN MENU, select TECHNICAL INFORMATION. Give information on PVR software.

7-1 RECEIVER

In TECHNICAL INFORMATION, select PRODUCT DATA.

7-2 HARD DISK

In TECHNICAL INFORMATION, select HDD INFORMATION.

7-3 ANTENNA SIGNAL

In TECHNICAL INFORMATION, select ANTENNA SIGNAL INFORMATION. Enter a value in the CHANNEL line to find out the level and quality of this channel.
7-4 Subscription information (PVR 7200 only)
In technical information select subscription information. Give information on your subscription and smart card.
7-5 MEDIA GUARD INFORMATION (PVR 7200 only)
Give information on Media guard librairy.

- 10 -

LU 456A PVR6200T_6600T_7200T UK.book Page 11 Mercredi, 11. janvier 2006 4:14 16

8. VIDEO RECORDINGS

Video recorder: Recordings and managing recordings

8-7 SAVING A RECORDING ON ANOTHER MACHINE
Connect your video recorder, for example, via the AUX Scart socket. Select this input on your video recorder. Select play mode on the receiver and record mode on the video recorder. Then refer to your video recorder instruction manual for the procedure to follow.

- 15 -

LU 456A PVR6200T_6600T_7200T UK.book Page 16 Mercredi, 11. janvier 2006 4:14 16

9. PHOTO EDITOR

This equipment only exists for the PVR6600T version.

9-1 CARE INFORMATION

The unit is designed to accept formats CFI and CFII, SM (Smartmedia), MS (Memory Stick), MSPRO (Memory Stick Pro), SD (Secure Digital), MMC (MultiMediaCard) and xD. These cards must be inserted in the correct slot for the model as indicated in the drawing. Failing this, the card reader and cards may be damaged or the data stored in the cards may be lost. Only one card must be inserted in the card reader at a time. Dont remove card during picture transfer.

Smart Media

SD Memory MMC
xD Picture Card MicrodriveTM & Compact flashTM Memory Stick and Memory Stick PRO DUO or DUO PRO with adaptator
9-2 STARTING THE PHOTO EDITOR
You can access the photo editor by: inserting a memory card, pressing the key on the remote control unit. The photo player can only display photos in jpeg format (basic format only). Photo mode cannot be accessed when a scheduled recording is in progress

- 16 -

LU 456A PVR6200T_6600T_7200T UK.book Page 17 Mercredi, 11. janvier 2006 4:14 16
Function of the remote control unit keys in PHOTO MODE

TOUCHES

FONCTION

- 17 -

LU 456A PVR6200T_6600T_7200T UK.book Page 18 Mercredi, 11. janvier 2006 4:14 16
9-3 READING AND TRANSFERRING A PHOTO ALBUM FROM A MEMORYCARD
9-3-1 Creating and transferring the photo album
Insert the card. It then becomes visible in the list of albums and photos that are displayed as thumbnails. Press the C key (yellow) to copy the album to the hard disk. You can copy the entire album stored on your card as a new album or place it in an album that already exists in your Photo editor. To do this, select the required destination with the arrow keys , , , and confirm. If you decide to create a new album, its default name will be the date when the oldest jpeg file stored on the card was created. If you want to give it a different name, enter a new name using the alphanumeric keypad on the remote control unit (for example, press key 2 for letter A, press key 2 twice quickly for letter B, etc.).

9-4 MANAGING ALBUMS

You can rename an album, read or edit information on this album, or delete an album. The data on the memory card cannot be modified. Press the A key (red) to delete an album. Press the B key (green) to rename an album. Enter a new name using the alphanumeric keypad on the remote control unit (for example, press key 2 for letter A, press key 2 twice quickly for letter B, etc.).

Press the key

to display or edit information on an album.
To access information on an album, press the key. You can now edit the information on this album by pressing the D key (blue). Then enter the text required using the alphanumeric keypad on the remote control unit (for example, press key 2 for letter A, press key 2 twice quickly for letter B, etc.).

9-5 MANAGING PHOTOS

You can transfer photos between albums, rename photos, sort them and print them. When reading a photo card, only select and transfer functions are available. Press the D key (Blue) to access Photo management. To select or unselect a photo: Press. To select several photos: Press the B key (green) during two seconds to select the first photo and press it once to select the last photo in the group. All the photos between these two photos are then selected. The key is used to add or remove photos in your selection. By pressing the B key (green) again, you can add a new selection to your initial selection. To transfer selected photos in an album: Select the destination for the photos by selecting an album and pressing the D key (blue). To copy or move selected photos between albums: Press the C key (yellow). Then choose to transfer or copy into another album or a new album that is created specifically for this purpose. To delete one or more selected photos: Press the A key (red).

- 20 -

LU 456A PVR6200T_6600T_7200T UK.book Page 21 Mercredi, 11. janvier 2006 4:14 16
To rename a photo: Press then MANAGING ALBUMS, page 20.
. Proceed in the same way as for renaming an album see
To sort photos : Select the photos to move. Place the cursor to the new position using keys The photos are moved to the new position.

. Press the key D.

9-6 PRINTING
You can print a photo album on a printer (for example, SAGEM PHOTO EASY) by connecting it to USB port B. In this case, the printer takes control of your receiver.
9-6-1 Selecting the photos to be printed via the Receiver
Scroll through the photos on your Receiver.

PHOTO PRINTER

Select the photos by pressing the key. The printer icon is displayed on the picture to indicate that it is selected.

Port B

Unselect the photos by pressing the key
Finally, connect the printer to USB port B. The printer then takes control of the receiver (The printer must manage the preselected files for printing). Each time the Receiver is placed in standby, the preselection file for printing is erased.
9-6-2 Selecting the photos to be printed via a Printer
Select your photos directly via the printer that will then import them.

- 21 -

LU 456A PVR6200T_6600T_7200T UK.book Page 22 Mercredi, 11. janvier 2006 4:14 16

10. EVERYDAY USE

10-1 SELECTING A TELEVISION CHANNEL
10-1-1 Using the keys and , or keys 0-9
Press the keys or to change channel or enter its number on the numeric keypad on the remote control unit to access the desired channel directly. It is possible to go back to the channel previously viewed by pressing the key.
10-1-2 Using the channel list
Press the key to display the channel list, select your channel then press again It is possible to go back to the channel previously viewed by pressing the key. to validate.
10-1-3 Channel information banner
Each time you select a new channel, an information banner is displayed on the screen. The quality and quantity of information does not depend on your receiver. It is supplied by the actual channels. The banner display time and level of transparency can be set in User preferences: A Channel number and name B Name of programme C Favourite list D Number of audio tracks and subtitles E AC3 audio F Start time of programme G Elapsed time H End time of programme I Current time
10-1-4 Extended information banner
If you want more information on the current programme and the following programme, press the key Press again or on your remote control unit. to delete the information banner.

- 22 -

LU 456A PVR6200T_6600T_7200T UK.book Page 23 Mercredi, 11. janvier 2006 4:14 16
10-2 SELECTING A RADIO CHANNEL
If this service is supplied by your operator. Press the key to switch to RADIO mode. Press to switch back to VIDEO mode.
10-3 ADJUSTING THE AUDIO VOLUME LEVEL

Volume: The volume level is adjusted using the keys and. Mute mode: The sound is cut if you press the key. The sound is restored if you press the same key again. The sound on the AUX Scart socket and Hi-Fi and digital audio outputs is not affected by these operations.
10-4 CHANGING THE FAVOURITE LIST
Press to display the screen. Press the D key (Blue) to scroll through the lists. A new favourite list can also be created in the FAVOURITE CHANNEL LIST.
10-5 TEMPORARILY SELECTING AUDIO LANGUAGES AND SUBTITLES
Press to display the extended information banner. Press to display the AUDIO banner. Press and to select the audio and subtitle languages. Temporary settings are not maintained after zapping.
10-5-1 Audio language / sound track
Select the language in the audio list proposed. All modifications are taken into account immediately.

10-5-2 Subtitle language

Select the language in the Subtitle list proposed. All modifications are taken into account immediately.

10-6 TELETEXT

If this service is supplied by your operator. Press the key on your remote control unit to access Teletext mode. To access the Teletext pages, use the numeric keys or press the keys and.

10-7 TV / VCR SWITCH

Press the key on your remote control unit to toggle the video recorder signal so that it is sent directly to the television. This function is only possible if the devices are connected together via a Scart lead.

- 23 -

LU 456A PVR6200T_6600T_7200T UK.book Page 24 Mercredi, 11. janvier 2006 4:14 16
10-8 ELECTRONIC PROGRAMME GUIDE
If this service is supplied by your operator. Press the key to access the electronic programme guide. Select a channel in the list to obtain information on the current programme on this channel. A video of the current program is displayed in the top left. In the same way, other information on the various forthcoming programmes is available. Programmes may be recorded using the electronic guide (cf. chap. 8.3).

- 24 -

LU 456A PVR6200T_6600T_7200T UK.book Page 25 Mercredi, 11. janvier 2006 4:14 16
11. CONNECTING A COMPUTER
Only version PVR6600T has USB ports. A computer (for example, a PC) can be connected to USB port B. The photo partition of the Receiver is seen as a removable mass memory on your computer. It is then possible to rename photos and albums, move photos between albums and transfer them to and from the computer.
To view the changes made on the Receiver, place your equipment in standby. When you unplug the receiver from a computer, do it correctly: select Remove the removable device in the menu bar on your PC.

12. UPDATING THE SOFTWARE
The receiver enters this mode when a new software version is supplied on the network after start-up. The system goes back into standby and then restarts by itself. A welcome picture is displayed. Then the Software update screen opens. You can postpone the downloading process by pressing the EXIT key. This process will be displayed again next timeyou switch your receiver on. Downloading starts when you press the key: The screen becomes black. The display indicates the download phases (0 to 4). The user cannot carry out any operation during this process during some minutes (5 to 10). Once the process is complete, the receiver will switch on automatically. After the receiver has switched itself on, press the key programme watched. to quit the welcome screen and go back to the last

- 25 -

LU 456A PVR6200T_6600T_7200T UK.book Page 26 Mercredi, 11. janvier 2006 4:14 16
13. PERIPHERAL CONNECTIONS
Connecting auxiliary equipment (e.g. video recorder) for a television with a Scart socket. Connecting an audio amplifier, using a stereo lead (Jack 3.5 mm to two RCA), or using a fibre optic lead (IEC958). Fibre optic connexion is mandatory to profit from a "HOME CINEMA" system.
Connecting auxiliary equipment (e.g. video recorder) for a television with a Scart socket. Connecting an analogue decoder with a Scart socket.

14. REFERENCE

14-1 TROUBLESHOOTING
The remote control unit has no effect on the receiver. The receiver displays - - : - -. A black screen or an error message is displayed. Picture motion less or reception problem. The receiver cannot find any channels. The television does not switch to the receiver when it leaves standby mode. No sound in "HOME CINEMA" mode on some channels. Point the remote control unit towards the receiver. Check the condition and orientation of the batteries. Take the receiver out of standby by pressing Carry out a programme search. Check all the connections and start a programme search again. Check that you are in a broadcast area. Readjust your antenna (cf. Quick Installation chapter). Check that your television is connected to the TV Scart socket and if required, select the Scart input directly on your television. Check that you are connected to a "HOME CINEMA" amplifier with a digital link.

Hard disk

Capacity/Recording : 40 GB, PVR 6240T up to 20 hours 80 GB, PVR 6280T up to 40 hours 160 GB, PVR 62160T up to 80 hours 80 GB, PVR 6680T up to 37 hours and 7.000 pictures 160 GB, PVR 66160T up to 75 hours and 15.000 pictures 80 GB, PVR 7200T up to 40 hours 160 GB, PVR 72160T up to 80 hours Noise level (Typ): <30dBA
A/V Input/Output TV SCART

RGB, CVBS, Audio stereo

AUX SCART
RGB input, CVBS, S-video output,

Accessories

41-key remote control unit Range: 7 m Batteries: 2 x 1.5 V (AAA type) 1 Scart lead External AC/DC adapter with power cable
Audio analog Hi-Fi stereo 3.5 mm stereo jack Audio digital output
PCM stereo or AC3, IEC958 optical

*PVR 6600 photo only.

- 27 -
LU 456A PVR6200T_6600T_7200T UK.book Page 28 Mercredi, 11. janvier 2006 4:14 16

14-3 GUARANTEE

ATTENTION In order to apply the guarantee, you should contact your dealer or Sagem Communication helpdesk at 48 081*. Proof of purchase will be required. Should any malfunctioning arise, the dealer or Sagem Communication helpdesk will advise you what to do. If you bought your equipment from Sagem Communication directly, the following shall apply: 1) Sagem Communication undertakes to remedy by repair, free of charge for labour and replacement parts, any defects in the equipment during a period of twelve (12) months from the date of original delivery of the equipment, where those defects are a result of faulty workmanship. During this twelve-month guarantee period, the defective equipment will be repaired free of charge; the customer must however return the defective equipment in its original package with all accessories at his/her own expense, to the address given by Sagem Communication After Sales Department, the phone number of which can be found on the delivery slip. Unless the customer has concluded with Sagem Communication a maintenance contract for the equipment which specifically provides for repairs to be carried out at the customer's residence, the repairs will not be carried out on the equipment at the customer's residence. The following sentence applies to purchases of equipment for the customer's trade, business or profession. Except as otherwise expressly provided in this Document and to the extent permitted by law, Sagem Communication makes no representations or warranties, express or implied, statuette or otherwise, and to such extent, all terms and conditions implied by law are hereby excluded. This guarantee does not affect the Customer's statutory rights. 2) Exclusions from Guarantee SAGEM shall have no liability under the guarantee in respect of: damage, defects breakdown or malfunction due to: - failure to properly follow the installation process and instructions for use, or - an external cause to the equipment (including but not limited to, lightening, fire, shock or water damage of any nature),

or - modifications made without the written approval of Sagem Communication, or - a failure or neglect to maintain the equipment or inappropriate maintenance, or - unsuitable operating conditions, particularly of temperature and humidity, or - repair or maintenance of the equipment by persons not authorised by Sagem Communication, or - the removal and/or destruction of the label positioned on the fixation screw of the lower plastic cover,
wear and tear from normal daily use of the equipment and its accessories, damage due to insufficient or bad packaging of equipment when returned to Sagem Communication, supply of new versions of software, work on any equipment or software modified or added without the prior written consent of Sagem Communication, malfunctions not resulting from the Equipment or from software installed in user workstations for the purpose of use of the equipment,

- 28 -

LU 456A PVR6200T_6600T_7200T UK.book Page 29 Mercredi, 11. janvier 2006 4:14 16
communication problems related to an unsuitable environment, including: - problems related to access and/or connection to the Internet such as interruptions by access networks or malfunction of the line used by the subscriber or his correspondent,
- transmission faults (for example poor geographical coverage by radio transmitters, interference or poor line quality), - the local network fault (wiring, servers, workstations) or the failure of the transmission network,
the normal servicing (as defined in the user guide supplied with the equipment) as well as malfunctioning due to servicing not being carried out, servicing costs are in any event always borne by the customer. * 0.15 /min, tariff cost effective form 06/27/2005.

- 29 -

LU 456A PVR6200T_6600T_7200T UK.book Page 30 Mercredi, 11. janvier 2006 4:14 16
Data subject to change without notice

*252466456A*

SAGEM COMMUNICATION
Socit anonyme au capital de 000 - 158 RCS PARIS 27, rue Leblanc - 75512 PARIS CEDEX 15 - FRANCE www.sagem.com