FREEVIEW+ HD DIGITAL TELEVISION RECORDER

RTI90-320 T2 HD

FREEVIEW+ HD DIGITAL TELEVISION RECORDER 320
Pause, rewind and record live TV Up to 160 hours of recording Watch and record programmes in HD Record a whole series at the touch of a button HD Recording Made Easy
Our innovative and user friendly Electronic Programme Guide enables you to view and plan your TV viewing simply by pressing the Guide button on your remote control. You can then choose to record a programme or a series over the next 8 days. By storing your HD content on the 320GB Hard Disc you can build a library of your favourite programmes and films and watch them when you wish.
Main Features Pause, rewind and record Live TV Simultaneous viewing of one channel
and recording another channel Build a library of your favourite shows HDMI upscale to 1080p HD viewing and recording
Series link 8 Day Programme Guide Favourite Lists D olby Digital Plus Parental Control T eletext and Subtitles A udio Description Option
Hardware Specifications Transmission standards: DVB-T / DVB-T2 Video Decoding: MPEG-4 / MPEG-2 Audio Decoding: Stereo 2.0 / Dolby Digital / Dolby Digital Plus Outputs: 1 x SCART, 1 x HDMI, RF-IN / RF-OUT Data Ports: Ethernet 10 / 100BT, USB 2.0 Host
FREEVIEW, FREEVIEW+, FREEVIEW HD and FREEVIEW+ HD words and logos are trademark of DTV Services, LTD. DTV Services Ltd 2002, 2008. Dolby and the double-D symbol are trademarks from Dolby Laboratories. HDMI, HDMI logo and High-Definition Multimedia Interface are trademarks or registred trademarks of HDMI Licensing LLC. Other logos are trademarks or registered trademarks of their respective owners. Product may vary from picture shown. Specifications subject to change without prior notice. Information correct when going to print: April 2010. Sagem Communications. www.sagemcomdigital.co.uk Sagemcom UK, 15 London Street, Chertsey, Surrey, KT16 8AP

RTI90-500 T2 HD

FREEVIEW+ HD DIGITAL TELEVISION RECORDER 500
Pause, rewind and record live TV Up to 250 hours of recording Watch and record programmes in HD Record a whole series at the touch of a button HD Recording Made Easy
Our innovative and user friendly Electronic Programme Guide enables you to view and plan your TV viewing simply by pressing the Guide button on your remote control. You can then choose to record a programme or a series over the next 8 days. By storing your HD content on the 500GB Hard Disc you can build a library of your favourite programmes and films and watch them when you wish.

Selecting a Radio channel.. 19 Adjusting the audio volume. 19 Changing the favourites list.. 20 Temporarily selecting audio languages and subtitles.. 20
Activating and Using Audio description.. 20

3. Product Overview.. 9

Package contents.. 9 Front panel of the Recorder.. 10 Rear panel of the Recorder.. 10 Remote control.. 11

Batteries...11

Teletext and interactive services.. 21 Temporarily selecting display formats. 21 Electronic programme guide.. 22 Live mode/Deferred mode.. 23
Pause / Play... 23 Rewind... 23 Fast forward... 23 Stop... 23

4. Connections. 12

Connection to the terrestrial antenna.. 12
Standard outdoor antenna..12 Indoor antenna..12 Connection to the antenna.13

7. Video Recordings.. 24

Immediate recording (Live or Deferred programme).. 24 Recording programmes from the menu. 25
Scheduling a recording manually. 25 Editing scheduled recordings.. 25
Connection to the TV set.. 13
Connection to a High-Definition television set using a HDMI lead..13 Connection to a Standard-Definition television set..14
Connection to a VCR/DVD recorder.. 14 Connection to a home theatre system. 15
Recording programmes from the Electronic programme guide.. 26 Recording List.. 27
Accessing Locked Recordings.. 27
LU 253311796A RTI90-320 T2 HD UK.book Page 4 Mercredi, 14. avril 2010 8:35 08
Managing the Recording list.. 28
Selecting recorded programmes..28 Sorting your recordings...28 Creating folders...29 Erasing recordings..29 Moving recordings..29 Renaming recordings..29 Merging recordings..30
8. Installation menus.. 31
Icons... 31 User settings... 31
Setting your language options.31 Setting your User Preferences..32 Recorder Locking and Parental control options...33 Changing your Parental code..33
Creating and Managing favourite lists. 34 Recorder settings.. 35
Searching for channels..35 Searching manually for channels.35 Picture settings..36 Audio settings...36 Resetting the recorder..37

Information Menu.. 38

Antenna Signal Information..38 Recorder Information..38 Hard disk drive Information.38

9. Troubleshooting.. 39

Using the recorder.. 39 Updating the software.. 40
10. Customer Support.. 41 11. Guarantee Terms. 42 12. Specifications.. 44
LU 253311796A RTI90-320 T2 HD UK.book Page 5 Mercredi, 14. avril 2010 8:35 08
RTI90-320 T2 HD UK 1. Safety recommendations
Use of the recorder is subject to safety measures designed to protect users and their environment.
Where to put your recorder?
In order to guarantee the correct operation of your recorder, you must: place it indoors to protect it from lightning, rain, and sun rays, place it in a dry and well ventilated area, keep it away from heat sources such as radiators, candles, lamps, etc. protect it from dampness, place it on a flat surface from where it will not fall and is out of reach of the children, do not place anything on top of your recorder (as it would restrict ventilation): the ventilation slots located on the casing prevent your recorder from overheating. If you place the recorder in a compartment, leave a space of at least 10 cm on each side and 20 cm on the front and back of the recorder, connect it directly to the mains with the provided cords, the socket must be near the recorder and easy to access. The use of an extension cable (with multi-points) is not recommended.
Warnings and safety instructions
NEVER OPEN THE RECORDER OR THE POWER SUPPLY UNIT! YOU RISK GETTING AN ELECTRIC SHOCK. Use only the power supply unit supplied with the recorder to connect it to the mains. Other practice may be dangerous. As a precaution, in case of danger, the power supply unit acts as a disconnecting mechanism for the 230V power supply. That is why it is imperative that you connect the recorder to a power outlet located nearby and easily accessible. You must imperatively connect the power supply unit to the recorder before connecting the power supply unit to the power socket. To avoid short-circuits (fire or electrocution hazard), do not expose your recorder to dampness. Do not place any object containing liquid (vase for example) on the appliance. The recorder must not be splashed with liquid. If liquid is spilled onto the recorder, unplug it immediately from the mains and consult your supplier. Take care not to allow liquids or metal objects to enter the recorder through the ventilation slots. Avoid reconnecting the recorder after it has been subjected to large changes in temperature. The recorder must be disconnected from mains supply (from the power outlet or rear panel) before any modification of connection between TV, VCR or antenna. In the event of a storm, it is advisable to unplug the antenna. Even if the recorder and the television set are disconnected from the power supply, lightning can still damage them. Only personnel approved by the manufacturer can repair the recorder. Failure to comply with these safety precautions will invalidate the guarantee.
LU 253311796A RTI90-320 T2 HD UK.book Page 6 Mercredi, 14. avril 2010 8:35 08

Batteries

Batteries are easily swallowed by young children. Do not allow young children to play with the remote control. To avoid damaging the remote control, only use identical batteries or batteries of an equivalent type. The batteries provided are not rechargeable.

Interference

Do not place the recorder near appliances that may cause electromagnetic interferences (for example loudspeakers). This could affect recorder operation and distort the picture or sound.

Hard disk

This unit contains a hard disk drive. Please wait for the unit to go into standby mode before unplugging and moving it.

USB Storage devices

Please wait until the recorder is in standby mode before disconnecting your storage devices. Else, you could lose data or damage your storage device.

Cleaning the recorder

The outer casing of the recorder can be cleaned with a soft and dry cloth. Do not use any type of abrasive pad, scouring powder or solvents, such as alcohol or turpentine, as they could damage the surface of the recorder.
LU 253311796A RTI90-320 T2 HD UK.book Page 7 Mercredi, 14. avril 2010 8:35 08
RTI90-320 T2 HD UK 2. Environment
Preservation of the environment is an essential concern of the manufacturer. The desire of the manufacturer is to operate systems observing the environment and consequently it has decided to integrate environmental performances in the life cycle of its products, from manufacturing to commissioning, use and elimination.
Meaning of logos present on the product or its packaging
The crossed-out dustbin sign stuck on the product or its accessories means that at the end of its life, the product is subject to selective collection and must not be thrown away in unsorted household waste. The looped arrow sign means that the packaging may be recycled and must not be disposed of with household waste. The green logo means that a financial contribution is paid to an approved national organisation to improve packaging recovery and recycling infrastructures. The logo with three arrows shown on the plastic parts means that they may be recycled and that they must not be disposed of with household waste.
Product recycling and disposal
To facilitate recycling, please respect the sorting rules set up locally for this kind of waste. If your product contains batteries, they must be disposed of at appropriate collection points. European regulations ask you to dispose of products belonging to the family of electrical and electronic equipments ( ) selectively:

LU 253311796A RTI90-320 T2 HD UK.book Page 10 Mercredi, 14. avril 2010 8:35 08
Front panel of the Recorder

Item 1 2

Description USB port (for future use) Status indicator

Item P-

Description Change channel (Down) Standby button Put the recorder in standby mode/Wake up the recorder from standby mode (press and let go) Restart the recorder (press and hold for 5 sec.)
Digital display Shows the current time when the recorder is in standby. Shows the programme number when the recorder is on. Shows hard disk activity (recording in progress, programme playback,.)

P+ Change channel (Up)

Rear panel of the Recorder

Item 9 10

Description Power supply unit connector Ethernet port (for future use) HDMI Digital video audio connector Analogue audio connectors (to hi-fi unit)

Item 13 14

Description Digital audio connector (S/PDIF) SCART connector (to TV) Antenna input Antenna output
LU 253311796A RTI90-320 T2 HD UK.book Page 11 Mercredi, 14. avril 2010 8:35 08

Remote control

Key(s) Description Put the recorder in standby mode/Wake up the recorder from standby mode. Access channels and various on-screen options Display the electronic programme guide (EPG) Turn the sound off/on Increase or decrease the audio volume Access menus Move in a page, a menu Display the channel list, confirm a selection Go back to the previous channel, screen or mode Select subtitles This key is by default deactivated. Becomes active when Audio description is activated in your User Preferences, and allows then to set Audio description on the current programme (see Setting your language options, page 31). Display programme information and options Change channel Video resizing (if TV set connected via HDMI). On-screen options (MHEG, Teletext pages and menu) Access the recording list Exit a screen, a mode Display Teletext pages when available Switch from TV mode to Radio mode Skip backward / Rewind / Fast forward / Skip forward Stop / Play / Pause Launch immediate recording, Schedule a recording from the electronic programme guide (EPG)
Undocumented keys are not used on this product.
The remote control needs two batteries (AAA) to operate. The drawing in the battery compartment indicates how to install them. The batteries provided are not rechargeable.
LU 253311796A RTI90-320 T2 HD UK.book Page 12 Mercredi, 14. avril 2010 8:35 08
High Definition Digital Television Recorder 4. Connections
Before installing your recorder: Please check that the delivery is complete (see Package contents, page 9). Please ensure that the appliances to be connected together (recorder, TV set, VCR) are unplugged before making any connections. Please ensure that Digital Terrestrial Television (DTT) is available in your area.

Connection to the terrestrial antenna
Very often to get the best reception, you may simply need to adjust your antenna. Alternatively, you can connect an indoor antenna to your system. For more information, please contact your specialised distributor.

Standard outdoor antenna

Preferably use an outside roof antenna that is designed to receive UHF channels (21 to 69). However: if your building is equipped with an old antenna model, digital channels may be difficult or even impossible to receive. The problem can only be resolved by changing the antenna. if your building is equipped with a common antenna which contains selective filters devised for analogue channels, reception will most probably not work correctly. In this case, you will have to contact the administrator of the building. some antennas directed towards an analogue TV transmitter must be re-adjusted towards a digital TV transmitter. If you encounter reception problems, you can also try placing the antenna at different heights.

Indoor antenna

In ideal reception conditions, this type of antenna is sufficient. Here, however, are some useful tips: use an antenna designed to receive channels 21 to 69. install the antenna close to the window and direct it towards the digital TV transmitter. if possible, use an antenna with an amplifier. The recorder can provide remote power supply to your indoor antenna (see Antenna Signal Information, page 38).
LU 253311796A RTI90-320 T2 HD UK.book Page 13 Mercredi, 14. avril 2010 8:35 08
Connection to the antenna
1. Plug the antenna cable (not supplied) into the ANTENNA IN input connector on your recorder. 2. You can connect the RF output connector of your recorder to the antenna input of the television set or VCR/DVD recorder (cable not supplied).

Connection to the TV set

Connection to a High-Definition television set using a HDMI lead
1. To take advantage of High Definition picture quality, you must connect the HDMI connector of your recorder to the HDMI connector on your television set (cable supplied). 2. To connect other devices to the recorder (VCR, home theatre cinema.), refer to the following pages. 3. Connect the power adaptor to the power cable. Then, connect the power cable into the 12V connector on the recorder. 4. Plug the power cord into the wall socket.
LU 253311796A RTI90-320 T2 HD UK.book Page 14 Mercredi, 14. avril 2010 8:35 08
Connection to a Standard-Definition television set
1. You must connect the television set to your recorder using a SCART connector (not supplied). 2. To connect other devices to the recorder (home theatre cinema.), refer to the following sections. 3. Connect the power adaptor to the power cable. Then, connect the power cable into the 12V connector on the recorder. 4. Plug the power cord into the wall socket.
Connection to a VCR/DVD recorder
See the diagram below to connect your recorder to a VCR/DVD recorder.

You can then browse the services, teletext pages and local information available following the onscreen indications.
Temporarily selecting display formats
Note All modifications take place immediately. However, temporary adjustments are not retained when you change channel. This feature is only available if you connected the recorder to an HD TV set via the HDMI connector.
Press the key to toggle between the display formats available for the programme you are watching:4/3, 14/9 zoom, 16/9 zoom or Full screen.
LU 253311796A RTI90-320 T2 HD UK.book Page 22 Mercredi, 14. avril 2010 8:35 08
Electronic programme guide
The electronic programme guide displays programme information for all available channels (depending on the information provided by channel broadcasters). You can also record programmes directly from the electronic programme guide (see Recording programmes from the Electronic programme guide, page 26). Press to access the electronic programme guide. You can also access it by pressing selecting ELECTRONIC PROGRAM GUIDE. The electronic guide shows programme information on all available channels. You can PIN-lock access to adult genre using the parental control feature (see Recorder Locking and Parental control options, page 33). To toggle between the Grid and List display modes, use the red key. and
To help you navigate in the electronic programme guide, a vertical line shows the current time. You can perform the following actions: To select a channel/programme, use the ,
, or keys. You can also directly enter the channel number on the remote control. To see extended information on a programme, highlight it and press.
To zap to a selected channel, select it and press. To jump to the next/previous day, press the / key. To record a programme that is currently broadcast, select it and press the key (see Recording programmes from the Electronic programme guide, page 26 for more information on this feature). To schedule the recording of a future programme, select it and press the green key (see Recording programmes from the Electronic programme guide, page 26 for more information on this feature). To see programme information for a specific genre on all available channels, press the blue key and select the genre you are interested in (ex : news). You can also search for a specific programme based on its genre or its title. To access this search feature, press the yellow key. key.
You can at any time go back to the current programme and channel information by pressing the To exit the electronic programme guide, press the key.
LU 253311796A RTI90-320 T2 HD UK.book Page 23 Mercredi, 14. avril 2010 8:35 08

LU 253311796A RTI90-320 T2 HD UK.book Page 27 Mercredi, 14. avril 2010 8:35 08

Recording List

Press the key to access the recording list. You can also access it by pressing RECORDING LIST. and selecting
You will be able to create folders to organise your recordings, and control the disk space available. The left panel displays the existing folders, and the programmes you recorded (locked recordings excluded). Highlight a recording using the navigation arrows, then press to play it.
Depending on the genre of the recorded programme, you may be asked to enter the parental PIN-code before you can play it. In Play mode: Use Press , and to move in the recorded programme.
to stop and return to the list.

To exit this menu, press

Accessing Locked Recordings
If you want to access the complete list of recordings, and view therefore the recordings you PIN-locked, press the yellow Press the yellow key. You will be asked to enter the parental PIN-code before you can view them. key again to switch back to the restricted list of recordings.
LU 253311796A RTI90-320 T2 HD UK.book Page 28 Mercredi, 14. avril 2010 8:35 08
Managing the Recording list
The coloured keys let you manage the recording list and offer you the following actions: red green blue : select an operation : select the highlighted recording : sort the recordings by date or name
Selecting recorded programmes
You can work with several recordings at the same time. To handle several files simultaneously, it is preferable to select them beforehand. To select several recordings: Highlight one recording. Press the green key, a check mark symbol appears next to the recording. Perform the same action to select other recordings. Once all the desired recording are selected, press the red key to management menu. Note The operations described in this section apply to recordings and folders. access the recording

Sorting your recordings

Press the blue key to sort your recordings by date or name.
LU 253311796A RTI90-320 T2 HD UK.book Page 29 Mercredi, 14. avril 2010 8:35 08

Creating folders

You can create folders to organise your recordings. Press the red key.
Select the action "New folder" and press
Use to delete the default name, then enter the desired name using the numeric keypad on the remote control. Note All folders created will be saved at the root of the hard disk. You can not create a folder in a folder. Use alphanumeric characters (letters and numbers) when naming folders. Do not use special characters. Accepted signs are ".", "_" and "-". Press to confirm the creation.

LU 253311796A RTI90-320 T2 HD UK.book Page 32 Mercredi, 14. avril 2010 8:35 08
Setting your User Preferences
In USER SETTINGS, select USER PREFERENCES. Display preferences Banner time-out: You can set how long you want the zapping and information banners to stay onscreen. Volume bar time-out: You can set how long you want the volume bar to stay onscreen when you turn the volume up, down, or mute it. User Country: Initially defined during the first installation, it is used to give you access to programmes and service available in your geographical location. To change the country, you will need to reset the default settings and reconfigure your recorder (see Resetting the recorder, page 37). Some services or channels may become unavailable. Network monitoring: By activating this feature, you will be automatically informed when any new channel or service become available. Recording preferences By default, the recorder records programmes based on their announced time. This recording mode is identified as PROGRAMME type. You can programme recording margins which will be automatically added to the recordings carried out via the electronic programme guide. You can thus set the recorder so that it starts to record a programme before its announced start time, and stops after its announced end time. To activate this feature, just set the recording type to TIMER, and select the desired starting and ending times (0,1,2,5, 10 or 15 minutes).
Note In TIMER mode, the series recording function is not available.
Sleep Timer You can set the recorder to automatically switch to standby mode at a specific time. If you activate this feature, set the desired SLEEP TIME in 24H format.
LU 253311796A RTI90-320 T2 HD UK.book Page 33 Mercredi, 14. avril 2010 8:35 08
Recorder Locking and Parental control options
In USER SETTINGS, select LOCKING. Recorder locking You can lock access to the recorder. If you activate the recorder lock, you will need to enter the parental code every time you switch the recorder on, or want to access the recorder menus (Recorder settings, Channels, etc.). Channel locking You can lock access to specific channels. If you activate the channel lock, you will need to enter the parental code every time you switch to a locked channel. To set the list of channels you want to lock, select Channels to lock and press select/unselect the channels of your choice by pressing Hiding Adult channels This feature lets you hide adult genre channels. If you activate this feature, all adult genre channels will be hidden: you will not be able to switch to an adult genre channel, or browse this category in the electronic programme guide. Use this feature to protect your children from this type of exposure. You can then

Audio settings

In RECEIVER SETTINGS, select AUDIO SETTINGS. Check the manuals of your audio equipment to know what settings you need. If you have connected your recorder to a home theatre cinema via the Digital audio connector, set DIGITAL AUDIO OUTPUT to MULTICHANNEL. Otherwise, leave it to STEREO. If the audio volume varies noticeably between programmes because of the audio type broadcast (Stereo, multichannel, etc.), adjust the volume (default value is 0 decibel) using and.
If the sound and picture are not synchronized, adjust the AUDIO/VIDEO DELAY setting (default value is 0 millisecond) using and.
These settings will apply to all programmes watched on all channels.
LU 253311796A RTI90-320 T2 HD UK.book Page 37 Mercredi, 14. avril 2010 8:35 08

Resetting the recorder

Note If you reset the default settings, you lose the channels and settings you made. This operation does not erase the recordings saved in the recording list. In RECEIVER SETTINGS, select RESET FACTORY DEFAULT. Enter your parental code and press.
A warning message appears. To cancel the operation, press or.
To confirm the reset, press
Once the default settings are restored, the recorder installation screen is displayed. You can then reconfigure your recorder (see First installation, page 16).
LU 253311796A RTI90-320 T2 HD UK.book Page 38 Mercredi, 14. avril 2010 8:35 08

Information Menu

The information contained in this menu may be requested if you contact your supplier or another technical service. You will find here important information about the recorder, the hard disk drive and the embedded software. To access the recorder technical information, press
the main menu, select INFORMATION.
Antenna Signal Information
In INFORMATION, INFORMATION. select ANTENNA SIGNAL
This menu lets you find out the signal level and quality of your antenna, for the currently watched programme. If you use an active antenna with an amplifier and if you want the recorder to supply it with power (5V power voltage -50mA max.), set Antenna power supply by DTR to YES. Otherwise, set it to NO.

Recorder Information

In INFORMATION, select PRODUCT DATA. This menu provides information on the recorder software and hardware.
Hard disk drive Information
In INFORMATION, select HARD DISK. This menu provides information on the hard disk.
LU 253311796A RTI90-320 T2 HD UK.book Page 39 Mercredi, 14. avril 2010 8:35 08
RTI90-320 T2 HD UK 9. Troubleshooting

Using the recorder

Symptom The remote control is not working. The recorder display shows no information (no time, no channel number, etc.). The recorder displays - -: - - in standby mode. The recorder displays a black screen or an error message. The picture is frozen./ unclear. Action Point the remote control at the recorder. Check the battery life and check the batteries are inserted properly. Switch the recorder on by pressing the On/Off button. Check all the connections (see Connections, page 12). Take the recorder out of standby mode by pressing the key. Check that the antenna signal is correctly detected (see Antenna Signal Information, page 38). Check that the antenna signal is correctly detected (see Antenna Signal Information, page 38). Search for programmes (see Searching for channels, page 35). Check all the connections, check the antenna and search for programmes again (see Searching for channels, page 35). Check the antenna reception (see Antenna Signal Information, page 38). Search for programmes (see Searching for channels, page 35). Contact your antenna installer/dealer for more information on your antenna installation. Check that your TV set is correctly connected to your recorder (see Connection to the TV set, page 13). Select the appropriate input on your TV set. Check that the recorder is connected to a Home Theatre amplifier with a digital link (see Connection to a home theatre system, page 15). Check that the signal type chosen for TV/AUX SCART output is compatible with your VCR (select PAL on VCR, see Picture settings, page 36). In the case of a double simultaneous recording, you can only channel-surf between a restricted number of channels. You will be able to channel-surf between all your channels again when at least one of the recordings ends. Some channels stop their broadcast with a fixed image or no video. When a recording ends on such programmes, the video recording stops but the time counter continues until the end of the scheduled recording time. Make sure that you set your manual recordings with the correct end time. Perform a default factory reset (see Resetting the recorder, page 37).

The recorder cannot find any channels.
The TV set does not switch to the recorder when it leaves standby mode. There is no sound in HOME CINEMA mode on some channels. Black and white video on TV/AUX output (during VCR/DVD recording). I cannot channel-surf between all my channels during a double recording.
A black screen (no video) appears at the end of a recording.

For any other problem.

LU 253311796A RTI90-320 T2 HD UK.book Page 40 Mercredi, 14. avril 2010 8:35 08

Updating the software

The recorder automatically downloads over the air new software and services when they become available. If a problem is encountered during the download, the recorder displays on its front panel an error code. Error code Er00 Er02 Er05 Er10 Er11 For any other error messages, contact our customer services team on 316. The signal quality does not enable the software to be correctly acquired. Press the OK key to continue the process. Check the signal strength and quality (see Antenna Signal Information, page 38). Meaning/Action The software currently in the recorder is identical to the software available. Recorder updating is therefore not necessary.
LU 253311796A RTI90-320 T2 HD UK.book Page 41 Mercredi, 14. avril 2010 8:35 08
RTI90-320 T2 HD UK 10. Customer Support
At Sagemcom we believe that a high quality product should come with the highest quality customer service. In the design of this product we have taken great care to ensure the maximum quality possible and are sure that you will be delighted with your purchase. However, in the rare event that you have any problems with the product and need advice or support you can be confident that we will do our best to help you. Our dedicated technical helpdesk can be contacted from 09:00 17:00, Monday to Friday and will offer expert guidance on your product. In the event of any trouble, please do not hesitate to call them on: 316
LU 253311796A RTI90-320 T2 HD UK.book Page 42 Mercredi, 14. avril 2010 8:35 08
High Definition Digital Television Recorder 11. Guarantee Terms

ATTENTION

In order to apply the guarantee, you should contact your retailer or Sagemcom helpdesk at 316. Proof of purchase will be required. Should any malfunctioning arise, the retailer or Sagemcom helpdesk will advise you what to do. If you bought your equipment from Sagem Communications SAS directly, the following shall apply: 1) Sagem Communications SAS undertakes to remedy by repair, free of charge for labour and replacement parts, any defects in the equipment during a period of twelve (12) months from the date of original delivery of the equipment, where those defects are a result of faulty workmanship. During this twelve-month guarantee period, the defective equipment will be repaired free of charge; the customer must however return the defective equipment in its original package with all accessories at his/ her own expense, to the address given by Sagem Communications SAS After Sales Department, the phone number of which can be found on the delivery slip. Unless the customer has concluded with Sagem Communications SAS a maintenance contract for the equipment which specifically provides for repairs to be carried out at the customer's residence, the repairs will not be carried out on the equipment at the customer's residence. The following sentence applies to purchases of equipment for the customer's trade, business or profession. Except as otherwise expressly provided in this Document and to the extent permitted by law, Sagem Communications SAS makes no representations or warranties, express or implied, statuette or otherwise, and to such extent, all terms and conditions implied by law are hereby excluded. This guarantee does not affect the Customer's statutory rights. 2) Exclusions from Guarantee Sagem Communications SAS shall have no liability under the guarantee in respect of: damage, defects breakdown or malfunction due to: - failure to properly follow the installation process and instructions for use, or - an external cause to the equipment (including but not limited to, lightning, fire, shock or water damage of any nature), or - modifications made without the written approval of Sagem Communications SAS, or - a failure or neglect to maintain the equipment or inappropriate maintenance, or - unsuitable operating conditions, particularly of temperature and humidity, or - repair or maintenance of the equipment by persons not authorised by Sagem Communications SAS, the removal and/or destruction of the label positioned on the fixation screw of the lower plastic cover, wear and tear from normal daily use of the equipment and its accessories, damage due to insufficient or bad packaging of equipment when returned to Sagem Communications SAS, supply of new versions of software, work on any equipment or software modified or added without the prior written consent of Sagemcom SAS,

LU 253311796A RTI90-320 T2 HD UK.book Page 45 Mercredi, 14. avril 2010 8:35 08
SD INPUT/OUTPUT SCART (TV setup configuration) FRONT PANEL 4 digits 7 segments blue color display IR sensor: 38 KHz RGB out, PAL in/out, volume control Audio R/L, Fast blanking out, Slow blanking out 1 x bicolour led 3 x buttons: On/Off, P+, PSCART (Recorder setup configuration) RGB in, PAL out , S-video out, fixed volume Audio R/L, Slow 1 x USB 2.0 (Type A Host) blanking in REAR PANEL HDMI OUTPUT 1 x RF input (IEC169-24-F) 1 x RF output (IEC169-24-M) HDMI 1.3 and HDCP 1.x RJ45 (ETH 10/100BT) VIDEO: YCrCb 1 x TV SCART (IEC60807-9) AUDIO 2 x RCA (Stereo L/R) - 2 channels PCM in case of MPEG1-layer II 1 x RCA (S/PDIF) - 2 channels PCM in case of HEAAC 1 x HDMI with HDCP - Dolby Digital or PCM in case of Dolby Digital beat stream(*) - Dolby Digital Plus, Dolby Digital or PCM in case of Dolby POWER SUPPLY Mains supply voltage 220-240 V ~50 Hz Digital Plus beat stream (*) External AC/DC adaptor (*) according of E(EDID) information Power (IEC 62087 Ed2): 25W AUDIO OUTPUT Standby consumption: < 2W HiFi audio output PHYSICAL SPECIFICATIONS Adjustable audio level - Mono/stereo in case of MPEG1 layer II, Recorder: - Two channnels down mixed in case of Dolby Digital, Dolby - Size (wxdxh): 260x160x48 mm Digital Plus, HEAAC audio stream - Weight: ~0.8 Kg Coax S/PDIF Stereo audio setup: Fixed audio level -20 dBLKFS - Two channels PCM in case of MPEG1-layer II stream, - Two channels PCM downmix in case of Dolby Digital / Dolby Digital Plus/HEAAC streams Multicanal audio set up: Fixed audio level -31 dBLKFS - Two channels PCM in case of MPEG1-layer II stream, - Originally received bit stream in case of Dolby Digital - Transcoded Dolby Digital in case of Dolby Digital Plus - Operating temperature: 0C to +40 - Storage temperature: -25C to +65C ACCESSORIES 1 x EU Power cable 1 x Remote control (range: 10.5m/33 feet) 2 x Saline AAA-R03 batteries 1 x HDMI cord 1 x User manual
LU 253311796A RTI90-320 T2 HD UK.book Page 46 Mercredi, 14. avril 2010 8:35 08

High Definition Digital Television Recorder Memo
LU 253311796A RTI90-320 T2 HD UK.book Page 47 Mercredi, 14. avril 2010 8:35 08
LU 253311796A RTI90-320 T2 HD UK.book Page 48 Mercredi, 14. avril 2010 8:35 08

253311796-A

Sagemcom Broadband SAS Headquarters: 250, route de lEmpereur 92848 Rueil-Malmaison Cedex - FRANCE Tel : +33 (0)00 - Fax : +33 (0)01 www.sagemcom.com
All rights reserved. The information and specications included are subject to change without prior notice. Sagem Communications SAS tries to ensure that all information in this document is correct, but does not accept liability for error or omission. Non contractual document. All trademarks are registered by their respective owners. Simplied joint stock company - Capital 158.291.895 Euros - 510 RCS Nanterre.