PM45_manual.qxd

11/02/2009

Page 1

Saitek
M80X Wireless Notebook Mouse
USER MANUAL BEDIENUNGSANLEITUNG GUIDE DUTILISATION MANUALE DUSO MANUAL DEL USUARIO

Page 2

SAITEK M80X WIRELESS NOTEBOOK MOUSE
System Compatibility PC running Windows XP/XP64/Vista/Mac OS X Installation
Powering the mouse on/off The mouse will automatically switch itself on when you insert new batteries. To save battery power when not using the mouse, press the power button on the underside and hold for for 3-5 seconds.To restart the mouse press the button once. The mouse LED flashes blue to indicate the batteries are running down. When this happens replace the batteries. Pairing your mouse and wireless receiver All wireless notebook mice and receivers are "paired" with each other and should work together automatically. However, if the wireless connection is broken for whatever reason, please follow the process below to re-establish the connection. 1. Plug the wireless receiver in to one of your PC's USB ports. 2. Press the button on the receiver for two seconds so that the green light flashes. 3. Press the button on the underside of the mouse once (short press). 4. Wait for the mouse to connect to the receiver. If the connection fails, press the button on the underside of the mouse once more to continue scanning (the connection will normally be made on the first press). The whole process should take less than 10 seconds. Troubleshooting If the mouse does not work: 1 Check the batteries have not expired and are inserted properly. 2 Make sure the mouse is switched on by pressing the button on the underside. 3 Check the wireless receiver is properly inserted in one of your PCs USB ports. 4 Insert the wireless receiver in another of your PCs USB ports. Important Information Some experts believe that using any mouse or trackball may cause serious injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, please consult a qualified health professional immediately.

k ite Sa

Unclip the battery cover.
Slide the cover back to expose the battery compartment.
Insert the wireless receiver in one of your PCs USB ports. With your PC switched on, follow the device installation wizard to complete the installation of the new USB device.
Insert the batteries in the compartment in the direction shown and replace the cover.

Page 4

reduce the risk of injury, please follow these precautions: Take frequent breaks, get up and walk around several times every hour. Vary your tasks throughout the day. Keep your shoulders relaxed with your elbows at your side. Position your keyboard and mouse so you do not have to reach. Adjust your chair and keyboard so your upper arms and wrists are straight. Avoid resting your wrists on sharp edges.
Technical Support Can't get started - don't worry, we're here to help you! Nearly all the products that are returned to us as faulty are not faulty at all - they have just not been installed properly. If you experience any difficulty with this product, please first visit our website www.saitek.com. The technical support area will provide you with all the information you need to get the most out of your product and should solve any problems you might have. If you do not have access to the internet, or if the website cannot answer your question, please contact your local Saitek Technical Support Team. We aim to offer quick, comprehensive and thorough technical support to all our users so, before you call, please make sure you have all the relevant information at hand. To find your local Saitek Technical Support Center, please see the separate Technical Support Center sheet that came packaged with this product. Information for Customers in the United States FCC Compliance and Advisory Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and; 2 This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. Saitek Industries, 2295 Jefferson Street, Torrance, CA 90501, USA Canada ICES-003 Operation is subject to the following two conditions: 1 This device may not cause interference, and; 2 This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Battery Information 2 AAA rechargeable batteries (included) Must be disposed of properly May explode if damaged or disposed of in fire Do not short circuit Importer's Declaration of Conformity Authorised representatives address: Saitek plc 4 West Point Row Great Park Road Almondsbury Bristol United Kingdom BS32 4QG

Page 6

Identification of Equipment: Saitek M80X Wireless Notebook Mouse Intended usage: 1313 For home use Conformity specification: Reference to European harmonised standards EN60950-1:2002 EN 300 220-3:2000 EN 301 489-3:2002 Technical Construction File Ref.: PCID/PM56 The above equipment conforms to the essential requirements of the following directive: 1999/5/EC EC Radio and Telecom Terminal Equipment directive The essential requirements the above equipment conforms to are: Article 3.1a (Safety) Article 3.1b (EMC) Article 3.2 (Use of radio spectrum) Limitations of frequency usage: Countries in which this product may not be sold/used: Signed: Andrew Young Position: Engineering Director Date: 1 August 2008 Company: Saitek plc Place: United Kingdom Conditions of Warranty 1 Warranty period is 2 years from date of purchase with proof of purchase submitted. 2 Operating instructions must be followed. 3 Specifically excludes any damages associated with leakage of batteries. Note: Batteries can leak when left unused in a product for a period of time, so it is advisable to inspect batteries regularly. 4 Product must not have been damaged as a result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our own service facility or an authorized service center, use or installation of non-Saitek replacement parts in the

product or the modification of this product in any way, or the incorporation of this product into any other products, or damage to the product caused by accident, fire, floods, lightning, or acts of God, or any use violative of instructions furnished by Saitek plc. Obligations of Saitek shall be limited to repair or replacement with the same or similar unit, at our option. To obtain repairs under this warranty, present the product and proof of purchase (eg, bill or invoice) to the authorized Saitek Technical Support Center (listed on the separate sheet packaged with this product) transportation charges prepaid. Any requirements that conflict with any state or Federal laws, rules and/or obligations shall not be enforceable in that particular territory and Saitek will adhere to those laws, rules, and/or obligations. When returning the product for repair, please pack it very carefully, preferably using the original packaging materials. Please also include an explanatory note. IMPORTANT: To save yourself unnecessary cost and inconvenience, please check carefully that you have read and followed the instructions in this manual. This warranty is in lieu of all other expressed warranties, obligations or liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product.

Page 8

Systemkompatibilitt PC mit Windows XP/XP64/Vista/Mac OS X Installation
Ein-/Ausschalten der Maus Die Maus schaltet sich automatisch aus, wenn Sie neue Batterien einlegen. Um bei Nichtverwendung der Maus Batteriestrom zu sparen, drcken Sie den Ein/Aus-Schalter auf der Unterseite und halten Sie ihn 3-5 Sekunden lang gedrckt. Zum Einschalten der Maus drcken Sie einmal auf den Schalter. Die Maus-LED blinkt blau, um das Nachlassen der Batterien anzuzeigen. In diesem Fall ersetzen Sie die Batterien. Maus und drahtlosen Empfnger kombinieren Alle drahtlosen Laptopmuse und -empfnger sind aufeinander abgestimmt und sollten automatisch zusammenarbeiten. Falls allerdings die drahtlose Verbindung aus irgendeinem Grund unterbrochen ist, befolgen Sie bitte die Anweisungen unten, um die Verbindung wiederherzustellen. 1. Verbinden Sie den drahtlosen Empfnger mit einem der USB-Anschlsse auf Ihrem PC. 2. Halten Sie die Taste auf dem Empfnger zwei Sekunden lang gedrckt, sodass das grne Licht blinkt. 3. Drcken Sie die Taste auf der Mausunterseite einmal (kurz drcken). 4. Warten Sie, bis die Maus mit dem Empfnger verbunden wird. Falls die Verbindung fehlschlgt, drcken Sie erneut einmal auf die Taste auf der Mausunterseite, um den Scanvorgang fortzusetzen (die Verbindung wird normalerweise beim ersten Mal Drcken hergestellt). Der gesamte Vorgang sollte weniger als 10 Sekunden dauern. Fehlerbehebung Falls die Maus nicht funktioniert: 1 berprfen Sie, dass die Batterien nicht leer sind und korrekt eingelegt wurden. 2 Stellen Sie durch Drcken des Schalters auf der Unterseite der Maus sicher, dass diese eingeschaltet ist. 3 berprfen Sie, dass der Empfnger korrekt an einen USB-Port Ihres PC angeschlossen ist. 4 Schlieen Sie den Empfnger an einen anderen USB-Port Ihres PC an. Wichtige Information Manche Experten vertreten die Meinung, dass die Verwendung einer Maus oder eines Trackballs unter Umstnden zu ernsthaften Verletzungen der Hnde,