Reviews & Opinions
Independent and trusted. Read before buy Samson SX!

Samson SX

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (French)
Samson SX Home Cinema Amplifier, size: 9.7 MB
Related manuals
Samson Sxover

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Samson SXSamson Technologies SX1200 450W SX Series Rack Mount Stereo Amplifier
The amplifier can operate in stereo, parallel, or bridged-mono mode according to your needs and offers combination XLR/TRS input jacks and 5-way binding posts and Speakon output connectors. Front-panel volume knobs let you make level adjustments easily. The SX1200 has a solid offering of internal protection, including circuitry to protect against overheating, short circuits, and DC. The unit is fan-cooled for increased reliability. The SX1200 has an open, natural sound quality with a wide freque... Read more

Details
Brand: SAMSON
Part Numbers: SAM SX1200, SAMSX1200, SASX1200, SX1200
UPC: 00809164004981, 809164004981

 

[ Report abuse or wrong photo | Share your Samson SX photo ]

Video review

GLANCE ( LIVE )

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

PRODUCT SPECIFICATION SHEET

AMPLIFIERS

PRODUCT

SX3200

SERIES

POWER AMPLIFIER

CATEGORY

DESCRIPTION

POWER AMPLIFIERS

GENERAL DESCRIPTION

The Samson SX3200 stereo power amplifier has been designed to provide robust, clean output with low distortion and wide dynamic range, along with the dependability demanded by the most professional audio engineers and installers. The convenient 2 rack-space design is compact, and yet theres plenty of power available. With 2 x 750 Watts at 8, 2 x 1100 Watts at 4 over the full frequency spectrum, from 10 Hz to 55 kHz. For mono applications, a Bridged mode links both channels of the amplifiers, thus providing even more power, with a power rating of 3200 watts into a 4 Ohm load. Input connections are made via Combination connectors allowing for both balanced XLR and balanced 1/4 TRS connections. For the outputs, the SX3200 amplifier provides standard 5-way binding posts as well as a Speakon connector. Front-panel controls and displays include a power switch with LED indicator, as well as independent left and right channel input level controls. To help you set the correct operating levels, the SX3200 include front panel Signal, Peak and Protection LED indicators. Like all serious power amplifiers, the SX3200s internal electronics are based around a serious powercore, with over-sized toroidal transformer and large extruded heat sinks. To keep the SX3200 amplifiers running cool, the designs employ twin internal wind tunnels with forced-air cooling via two temperaturesensitive, variable speed fans, which greatly reduces
the chance of thermal and overheating problems. Multi-stage protection for power-up, over-heating, over-current, short circuit, low output impedance and DC voltage, assures high reliability under the most demanding situations. The SX3200 amps are road tough with their all steel chassis, 19-inch rack mount design and convenient carry handles, the SX3200 amplifiers are ready for a life of travel, or to make its home in a fixed installation.

FEATURES

> Power to spare - 2 x 750 Watts at 8, 2 x 1100 Watts at 4. > For mono applications, a Bridged mode links both channels
of the amplifiers, thus providing even more power, with a power rating of 3200 watts into a 4 Ohm load.
> Clean, crisp sound - Impressive audio specifications such
as 0.01% THD, signal to noise of 105 dB, crosstalk of 80 dB, and frequency response of 10 Hz to 55 kHz guarantee ultra-clean sound quality.
> Independent input level controls for each channel allow

precision adjustments.

> LED signal indicators for each channel continuously display
power output levels and allow you to correct for overloading (clipping) conditions.
> Unique stable bipolar circuit design that continuously
keeps DC output during idling at or near zero volts (thus keeping idle speakers at their zero point). This serves to minimize heat overload problems by effectively preventing the SX3200 from applying power when unnecessary.

continues

FRONT PANEL

BACK PANEL

750 W 1100 W

2006 Samson v1.0 5/06

FEATURES (continued)
> Forced air cooling via two temperature-sensitive, variable

SX3200 SPECIFICATIONS

Rated Output Power Stereo both channels driven 8 Ohms.. 750 Watts 4 Ohms.. 1100 Watts Bridged mono 4 Ohms.. 3200 Watts Signal to Noise Ratio (20Hz-20k). 105dB Distortion (SMPTE-IM). 0.05% Input sensitivity @8 Ohms. 1.24V(4dBu) Voltage Gain. 35dB Output Circuitry Class.. H Current Consumption (115VAC) @1/8 rated power 4 Ohms. 9A @1/3 rated power 4 Ohms. 19.8A @ rated power 4 Ohms, max. 39.2A Distortion (typical @4 Ohms) 20Hz-20kHz,10dB below rated power.. 0.01% 1kHz,rated power. 0.1% Frequency Response @ 8Ohms, 1Watt.. 0/-0.5dB:20Hz-20kHz,0/3dB:5Hz-60kHz Damping Factor (400Hz). 350 Input Impedance.. 15k Ohm Unbalanced, 30k Ohm Balanced Input Clipping.. 10Vrms(22dBu) Cooling... Continuously variable speed, fan forced air Connectors (each channel) Input.. Active balanced combo and 1/4 (6.3mm) TRS Output. 5-way Binding post and Speakon Controls.. AC power switch,Channel 1 and 2 volume Indicators.. Power on(blue), Protection (amber), Signal(green) for each Ch., Peak(red) for each Ch. Protection.. Short circuit,Thermal,Current limit, DC offset,Current inrush, RF protection, Turn on/Turn off muting Power Requirements.. 100, 115/230, 240VAC, 50/60Hz
speed fans provides reliable performance without thermal and overheating problems.
> Protection relay circuitry (with dedicated LEDs for each
channel) that guards against overheating or faulty wiring conditions and also prevents thumps when powering on or off. This means that you can use the SX3200 with a single power strip into which a mixer or other audio devices are connected, without danger of damage to connected speakers.

> Combination input connectors for each channel accommodate
both balanced XLR or balanced 1/4 TRS plugs.
> Output connections are made via 5-way binding posts
along with a Speakon connector.
> Toroidal transformer power supply for high current and low profile. > User-resettable circuit breaker for fast, easy startup
following a power supply overload.
> The SX3200 can be mounted in any standard 19" rack
(taking just two rack spaces), making it easy to integrate the amp into any fixed or traveling PA rig.
> Rugged construction (an all-steel chassis with a cool gray
finish and a lightweight anodized aluminum heat sink) makes the SX3200 eminently roadworthy.
> Extended three-year warranty.
ARCHITECTS & ENGINEERS SPECIFICATIONS
The Samson SX3200 shall be a 2 rack space, 2 channel power amplifier. It shall deliver 2 x 750 watts into an 8 Ohm load or 2 x 1,100 watts into a 4 Ohm load. It shall have front panel volume controls, power switch, signal present and peak indicators. The rear panel shall have 1/4 inch and XLR balanced inputs on combi connectors. The outputs shall be provided on Speakon connectors and 5 way binding posts. The rear panel shall have a mode of operation switch to switch between stereo, bridged mono, and parallel modes of operation. The amplifier shall be fan cooled. The amplifier shall receive AC power through a standard IEC connector.
Dimensions (W x H x D).. 19 x 3.5 x 18 (483mm x 89mm x 445mm) rack mounting to rear support Net Weight.. 48lb. (21.8kg)

doc1

New SX Series Power Amps from Samson
January 26, 2005 Samson introduced the new Samson SX-1200, SX-1800, SX-2400, and SX-2800 power amps at Winter NAMM. The SX-1200 is a class AB amplifier that offers ease of operation and plenty of available power to effectively drive a small PA, monitor fills, or fixed installation system. Stereo operation is available down to 2 Ohms at 600-Watts per side, as well as a 4 Ohm bridged mono mode providing the full 1200-Watts of power. The SX-1800 produces 1800-Watts of power from a class AB amplifier design. Stable at 2 Ohms like the entire SX line, the SX-1800 lets you run a system at a blistering 900-Watts per side in stereo mode with out breaking a sweat, thanks to the internal amplifier design and variable-speed fan cooling. The SX-2400 utilizes a high output Class H rail-switching amplifier design allowing 1200 Watts per side or 2400 Watts bridged mono at 4 Ohms. This kind of power is perfect for large multi-format full-range and subwoofer systems. With locking XLR inputs and Speakon speaker outputs your connections are secure, solid, and worry free. The most powerful SX Amplifier in the lineup, the SX-2800 boasts an un-heard of 2800-Watts or power in a two rack space design. Ideal for driving 18" sub fills or large front-of-house mains in larger venues, the SX-2800 gives you clean worry free power, and a lot of it. The SX Amps are built around a new power core design with over-sized toroidal transformers and extra-large heat sinks. Most importantly the amps maintain cool operating temperatures thanks to a forced-air cooling system with temperature sensitive variable-speed fans. Trouble free operation is provided by multi-stage protection for power-up, over-heating, over-current, short circuit, low output impedance and DC voltage, assuring total reliability under the most demanding conditions. The complete SX line is 2 Ohms stable and features locking XLR/TRS inputs as well as Speakon, and banana-jack speaker outputs. For more information, visit their web site at www.samsontech.com.

 

Technical specifications

Full description

The amplifier can operate in stereo, parallel, or bridged-mono mode according to your needs and offers combination XLR/TRS input jacks and 5-way binding posts and Speakon output connectors. Front-panel volume knobs let you make level adjustments easily. The SX1200 has a solid offering of internal protection, including circuitry to protect against overheating, short circuits, and DC. The unit is fan-cooled for increased reliability. The SX1200 has an open, natural sound quality with a wide frequency range and very low distortion. All of these features inside a 2U steel housing make the SX1200 a great option for your amplification needs.

 

Tags

Joystick Hyundai IX55 GT-S620 AX-530 2400-103 UX-T550 Amilo PI SMX-C200BN Scales VGN-NR32m S UX-485 TH-42PX10 Of Time 1660E VP-DC161 Cable WM3-96 Kodak C530 M200 C Diam100 SP1614C Recorder 160 XRS 989 S1 PRO 300 H 96640 MX 5224 Bizhub 160 Rrus430 12-33 SMS 850 ABS 939A8X-M UN46C6400RF Norrath Ergocoach MC-806BL Audio Xcity250-2007 Nokia 1200 Gt Subscription-WEB Premium DSC-P41 Review Splitter Drhd-120 20PV164 KV-32FC60Z BDS-1860 FW-C80 DVP3100V CXT65 L7VTA10B R9020 BH-303 Extreme 2 Joybee 200 MD130 RX-V393 MDS-JE320 DSC-W370 G 100 Plus KIP 3100 Urc 8017 Monopoly ALL-IN-ONE Firewire 410 XR-C550 JBL G300 Nokia 2660 2YM15 TX-15LT2 Samba GZ-MG365 Pdasync DVX340 DM-9090 Router A-2300SX FBX-1020 NP-N220 TTR230-2005 Casio AT1 PV-L353D Irci-5400Z SKW-420 X9575 Companion RSA1wtmh K10ledv NEX-5 Indesit D41 PC4000 AQ12FC G-450A Melbourne SD27 MW100 FS752TPS 640 C ES526 AVR 65

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101